この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
目次
Cisco Unified Communications Manager 一括管理(BAT)は、多数の電話機を一括して追加、更新、または削除する高速で効率的な方法を管理者に提供します。 Cisco Unified Communications Manager の管理ページを通じて個々に更新を行う必要はありません。 BAT を使用して次のタイプの電話機を処理することができます。
この章では、BAT を使用して電話テンプレートと他の IP テレフォニー デバイスに関する作業を行う方法について説明します。
BAT を使用して、電話機と他の IP テレフォニー デバイスを一括して Cisco Unified Communications Manager データベースに追加する場合は、各電話機に複数の回線、サービス、およびスピード ダイヤルを追加することができます。 CTI ポートと H.323 クライアントを追加することもできます。
BAT 電話テンプレートを使用して、一連の新しい電話機を追加するために共通の電話機属性を定義します。 テンプレートの作成前に、電話機設定値(たとえば、デバイス プール、ロケーション、コーリング サーチ スペース、ボタン テンプレート、ソフトキー テンプレート)が、 Cisco Unified Communications Manager の管理ページに設定されていることを確認してください。 BAT で新しい設定値を作成することはできません。
複数の電話テンプレートに対応できるように、 Cisco Unified Communications Manager では、ユーザが定義する検索条件に基づいて特定の電話テンプレートを検出できます。
(注) |
ブラウザ セッションの作業中、検索/一覧表示の検索プリファレンスはクライアント マシンのクッキーに格納されます。 別のメニュー項目に移動してからこのメニュー項目に戻った場合、またはブラウザを閉じてから新しいブラウザ ウィンドウを再度開いた場合、検索を変更するまで Cisco Unified Communications Manager 検索プリファレンスが維持されます。 |
新しい BAT 電話テンプレートを作成することができます。 電話テンプレートを作成したら、回線、サービス、およびスピード ダイヤルを追加できます。
ステップ 1 |
の順に選択します。 [電話テンプレートの検索/一覧表示(Find and List Phone Templates)] ウィンドウが表示されます。 |
ステップ 2 | [新規追加(Add New)] をクリックします。 [新規電話テンプレートを追加(Add a New Phone Template)] ウィンドウが表示されます。 |
ステップ 3 | [電話のタイプ(Phone Type)] ドロップダウン リスト ボックスで、テンプレートを作成する対象の電話機のモデルを選択します。 [次へ(Next)] をクリックします。 |
ステップ 4 |
[デバイスプロトコルの選択(Select the Device Protocol)] ドロップダウン リスト ボックスで、デバイス プロトコルを選択します。 [次へ(Next)] をクリックします。 [電話テンプレートの設定(Phone Template Configuration)] ウィンドウに、選択したデバイス タイプに対応するフィールドとデフォルトのエントリが表示されます。 |
ステップ 5 |
[テンプレート名(Template Name)] フィールドに、テンプレートの名前を入力します。 名前には、50 文字以内の英数字を指定することができます。 例:Sales_7975 |
ステップ 6 | [デバイス情報(Device Information)] 領域に、このバッチに共通する電話機設定値を入力します。 詳細については、表 1を参照してください。 電話機モデルとデバイス タイプによっては、表に記載されている属性すべてを備えていないものがあります。 |
ステップ 7 | この BAT 電話テンプレートの設定値をすべて入力した後、[保存(Save)] をクリックします。 |
トランザクションが完了したことがステータスに示されたら、回線属性を追加することができます。
BAT テンプレートに 1 つ以上の回線を追加したり、既存の回線を更新したりすることができます。 BAT テンプレートで使用しているボタン テンプレートにより、追加または更新できる回線の数が決まります。 複数の回線を持つマスター電話テンプレートを作成することができます。 さらに、マスター テンプレートを使用して、1 回線またはマスター テンプレートの回線数以下の複数回線を持つ電話機を追加することができます。 選択する設定値は、このバッチ内のすべての電話機またはユーザ デバイス プロファイルで使用されます。
回線テンプレートの値には、英数字を使用することをお勧めします。番号を指定すると、実際の電話番号と競合する可能性があるためです。 英数字を使用することで、コール ピックアップ グループ番号やコール パーク番号などの情報との競合も回避できます。
BAT テンプレート用に表示される最大回線数は、BAT 電話テンプレートの作成時に選択したモデルとボタン テンプレートによって決まります。 一部の Cisco Unified IP Phone モデルでは、Cisco Unified IP Phone サービスとスピード ダイヤルをテンプレートに追加することもできます。
ステップ 1 | 回線を追加する電話テンプレートを検索します。 |
ステップ 2 | [電話テンプレートの設定(Phone Template Configuration)] ウィンドウの [割り当て情報(Association Information)] 領域で、[回線 [1] - 新規DNを追加(Line [1] - Add a new DN)] をクリックします。 [回線テンプレートの設定(Line Template Configuration)] ウィンドウが表示されます。 |
ステップ 3 | 回線設定値に対して適切な値を入力または選択します。 詳細については、表 1を参照してください。 すべてのフィールドは、オプションです。 |
ステップ 4 | [保存(Save)] をクリックします。 |
ステップ 5 | その他の回線の設定値を追加するには、ステップ 2 ~ステップ 4 を繰り返します。 [回線テンプレートの設定(Line Template Configuration)] ウィンドウの右上隅にある [関連リンク(Related Links)] ドロップダウン リスト ボックスから [検索/一覧表示に戻る(Back to Find/List)] を選択すると、[回線テンプレートの検索/一覧表示(Find and List Line Templates)] ウィンドウが表示されます。 |
各種の Cisco Unified IP Phone サービスを、この機能を備える Cisco Unified IP Phone モデルに、BAT テンプレートで直接登録できます。 ユーザまたは電話機を IP サービスにまとめて登録するには、IP サービスが共通のサービス パラメータを持ち、電話テンプレートによって登録されている必要があります。 固有のサービス パラメータを持つ IP サービスをまとめて登録することはできません。 固有のサービス パラメータを持つサービスの場合は、CSV ファイルを使用します。
ステップ 1 | IP サービスを追加する電話テンプレートを検索します。 |
ステップ 2 | [電話テンプレートの設定(Phone Template Configuration)] ウィンドウの [割り当て情報(Association Information)] 領域で、[新規SURLを追加(Add a new SURL)] をクリックします。 ポップアップ ウィンドウが表示されます。 このウィンドウで、利用可能な Cisco Unified IP Phone サービスを登録できます。 |
ステップ 3 | [サービスの選択(Select a Service)] ドロップダウン リスト ボックスで、すべての電話機に登録するサービスを選択します。 [サービスの説明(Service Description)] ボックスに、選択したサービスの詳細が表示されます。 |
ステップ 4 | [次へ(Next)] をクリックします。 |
ステップ 5 | 必要に応じて、[サービス名(Service Name)] フィールドでサービスの名前を変更します。 |
ステップ 6 | 選択したサービスを関連付けるか、他のサービスをテンプレートに追加します。 選択したテンプレートのサービスの追加または更新が完了したら、次のステップに進みます。 |
ステップ 7 | ポップアップ ウィンドウを閉じます。 |
引き続き、選択したテンプレートにスピード ダイヤルを追加することができます。
電話機ボタン テンプレートでスピード ダイヤル ボタンが設定されている場合は、電話機および Cisco VGC Phone の BAT テンプレートでスピード ダイヤルを追加または更新することができます。 BAT テンプレートで使用している電話機ボタン テンプレートによって、使用可能なスピード ダイヤル ボタンの数が決まります。
ステップ 1 | スピード ダイヤルを追加する電話テンプレートを検索します。 | ||
ステップ 2 | [電話テンプレートの設定(Phone Template Configuration)] ウィンドウで、次のいずれかを実行します。 ポップアップ ウィンドウが表示されます。 このウィンドウで、Cisco Unified IP Phone および拡張モジュールに対して、スピード ダイヤル ボタンを指定できます。 | ||
ステップ 3 |
[スピードダイヤル設定(Speed Dial Settings)] 領域で、アクセス コードや長距離コードを含めて、電話番号を [番号(Number)] フィールドに入力します。
|
||
ステップ 4 | [ラベル(Label)] フィールドに、スピード ダイヤル番号に対応するラベルを入力します。 | ||
ステップ 5 | [短縮ダイヤル設定(Abbreviated Dial Settings)] 領域で、該当する IP Phone モデルに短縮ダイヤルを設定することができます。 ステップ 3 を繰り返します。 | ||
ステップ 6 | [保存(Save)] をクリックします。 BAT によってテンプレートにスピード ダイヤル設定値が挿入され、ポップアップ ウィンドウが閉じます。 |
電話機ボタン テンプレートでスピード ダイヤル ボタンが設定されている場合は、電話機および Cisco VGC Phone の BAT テンプレートでビジー ランプ フィールド スピード ダイヤルを追加または更新することができます。 BAT テンプレートで使用している電話機ボタン テンプレートによって、使用可能な BLF SD ボタンの数が決まります。
ステップ 1 | スピード ダイヤルを追加する電話テンプレートを検索します。 |
ステップ 2 | [電話テンプレートの設定(Phone Template Configuration)] ウィンドウで、次のいずれかを実行します。 ポップアップ ウィンドウが表示されます。 このウィンドウで、Cisco Unified IP Phone および拡張モジュールに対して、ビジー ランプ フィールド スピード ダイヤル(BLF SD)ボタンを指定できます。 |
ステップ 3 | [スピードダイヤル設定(Speed Dial Settings)] 領域で、アクセス コードや長距離コードを含めて、電話番号を [接続先(Destination)] フィールドに入力します。 |
ステップ 4 | ドロップダウン リスト ボックスから電話番号を選択します。 [検索(Find)] をクリックすると、電話番号を検索できます。 |
ステップ 5 | [ラベル(Label)] フィールドに、BLF SD 番号に対応するラベルを入力します。 |
ステップ 6 | [保存(Save)] をクリックします。 BAT によってテンプレートに BLF SD 設定値が挿入され、ポップアップ ウィンドウが閉じます。 |
電話機ボタン テンプレートでスピード ダイヤル ボタンが設定されている場合は、電話機および Cisco VGC Phone の BAT テンプレートでビジー ランプ フィールド(BLF)ダイレクト コール パークを追加または更新することができます。 この BAT テンプレートで使用している電話機ボタン テンプレートによって、使用可能な BLF ダイレクト コール パーク ボタンの数が決まります。
ステップ 1 | BLF スピード ダイレクト コール パークを追加する電話テンプレートを検索します。 |
ステップ 2 | [電話テンプレートの設定(Phone Template Configuration)] ウィンドウで、次のいずれかを実行します。 ポップアップ ウィンドウが表示されます。 このウィンドウで、Cisco Unified IP Phone および拡張モジュールに対して、BLF ダイレクト コール パーク ボタンを指定できます。 |
ステップ 3 | [割り当てられていないビジーランプフィールド/ダイレクトコールパークの設定(Unassigned Busy Lamp Field/Directed Call Park Settings)] 領域で、ドロップダウン リスト ボックスから電話番号を選択します。 [検索(Find)] をクリックすると、電話番号を検索できます。 |
ステップ 4 | [ラベル(Label)] フィールドに、BLF ダイレクト コール パーク番号に対応するラベルを入力します。 |
ステップ 5 | [保存(Save)] をクリックします。 BAT によってテンプレートに BLF ダイレクト コール パーク設定が挿入され、ポップアップ ウィンドウが閉じます。 |
BAT テンプレートに 1 つ以上のインターコム テンプレートを追加したり、BAT テンプレートの既存のインターコム テンプレートを更新したりすることができます。BAT テンプレートで使用しているボタン テンプレートにより、追加または更新できる回線の数が決まります。 複数の回線を持つマスター電話テンプレートを作成することができます。 さらに、マスター テンプレートを使用して、1 回線またはマスター テンプレートの回線数以下の複数回線を持つ電話機を追加することができます。 インターコム テンプレート用に選択する設定値は、このバッチ内のすべての電話機またはユーザ デバイス プロファイルで使用されます。
インターコム テンプレートには、英数字を使用することをお勧めします。番号を指定すると、実際の電話番号と競合する可能性があるためです。 英数字を使用することで、コール ピックアップ グループ番号やコール パーク番号などの情報との競合も回避できます。
BAT テンプレート用に表示される最大回線数は、BAT 電話テンプレートの作成時に選択したモデルとボタン テンプレートによって決まります。 一部の Cisco Unified IP Phone モデルでは、Cisco Unified IP Phone サービスとスピード ダイヤルをテンプレートに追加することもできます。
ステップ 1 | インターコム テンプレートを追加する電話テンプレートを検索します。 | ||
ステップ 2 | [電話テンプレートの設定(Phone Template Configuration)] ウィンドウの [割り当て情報(Association Information)] 領域で、[インターコム [1] - 新規インターコムの追加(Intercom [1] - Add a new Intercom)] をクリックします。 [インターコムテンプレートの設定(Intercom Template Configuration)] ウィンドウが表示されます。 | ||
ステップ 3 | インターコム テンプレート設定値に対して、適切な値を入力または選択します。 詳細については、表 1を参照してください。 | ||
ステップ 4 | [保存(Save)] をクリックします。 BAT によって、インターコム テンプレートが電話テンプレート設定に追加されます。 | ||
ステップ 5 |
その他のインターコム テンプレートの設定値を追加するには、ステップ 2 ~ステップ 4 を繰り返します。 [インターコムテンプレートの設定(Intercom Template Configuration)] ウィンドウの右上隅にある [関連リンク(Related Links)] ドロップダウン リスト ボックスから [検索/一覧表示に戻る(Back to Find/List)] を選択すると、[インターコム電話番号の検索/一覧表示(Find and List Intercom Directory Numbers)] ウィンドウが表示されます。
|
ステップ 1 | 変更する電話テンプレートを検索します。 |
ステップ 2 | [電話テンプレートの設定(Phone Template Configuration)] ウィンドウで、テンプレートの設定値を追加、変更、または削除します。 詳細については、表 1を参照してください。 |
ステップ 3 | 設定値を変更した後、[保存(Save)] をクリックしてテンプレートを更新します。 |
BAT テンプレートの回線、IP サービス、またはスピード ダイヤルを追加または更新することができます。
変更するフィールドの数が少ない場合は、既存の電話テンプレートのプロパティを新しい電話テンプレートにコピーできます。 このコピーには、元のテンプレートで指定した値がすべて複写されます。
(注) |
作成する新しいテンプレートは、元のテンプレートとデバイス タイプが同じでなければなりません(たとえば、Cisco IP Phone 7975)。 |
ステップ 1 | コピーする電話テンプレートを検索します。 |
ステップ 2 |
電話テンプレートをコピーします。 次のいずれかを実行します。
|
ステップ 3 |
[テンプレート名(Template Name)] フィールドに、テンプレートの名前を入力します。 名前には、50 文字以内の英数字を指定することができます。 例:Sales_7975 |
ステップ 4 | 必要に応じて、新しいテンプレートのフィールドを更新します。 詳細については、表 1を参照してください。 |
ステップ 5 | [保存(Save)] をクリックします。 BAT に追加されるテンプレートが、左側の [電話テンプレート(Phone Template)] カラムに表示されます。 |
引き続き、テンプレートの電話回線、IP サービス、スピード ダイヤルを追加または更新することができます。
注意 |
特定の電話テンプレートを使用するジョブを送信し、その電話テンプレートを削除すると、ジョブも削除されます。 |
ステップ 1 | 削除する電話テンプレートを検索します。 |
ステップ 2 | 電話テンプレートを削除します。 次のいずれかを実行します。 削除操作を確認するように求めるメッセージが表示されます。 |
ステップ 3 | [OK] をクリックして、テンプレートを削除します。 [電話テンプレートの検索/一覧表示(Find and List Phone Templates)] ウィンドウの電話テンプレート リストのリストから、テンプレート名が消去されます。 |
フィールド |
説明 |
||||||
---|---|---|---|---|---|---|---|
[デバイス情報(Device Information)] |
|||||||
[デバイス信頼モード(Device Trust Mode)] |
デバイスが信頼されているか、または信頼されていないかを選択します。 SCCP を使用するアナログ電話と一部のサードパーティのエンドポイント用に、この設定を行うことができます。 |
||||||
[テンプレート名(Template name)] |
テンプレートの名前を入力します。 |
||||||
[説明(Description)] |
作成する電話テンプレートの説明を入力します。 説明には、任意の言語で最大 50 文字を指定できますが、二重引用符(")、パーセント記号(%)、アンパサンド(&)、バックスラッシュ(\)、山カッコ(<>)は使用できません。 |
||||||
[デバイスプール(Device Pool)] |
このグループの電話機またはポートのデバイス プールを選択します。 デバイス プールは、デバイスに共通した特性のセット(たとえば、地域、日付/時刻グループ、 Cisco Unified Communications Manager グループ、自動登録用のコーリング サーチ スペースなど)を定義します。 |
||||||
[共通デバイス設定(Common Device Configuration)] |
この電話機を割り当てる共通デバイス設定を選択します。 共通デバイス設定には、特定のユーザに関連付けられた属性(サービスまたは機能)が含まれています。 [共通デバイス設定(Common Device Configuration)] ウィンドウで共通のデバイス設定を行います。 共通デバイス設定の詳細については、『Cisco Unified Communications Manager アドミニストレーション ガイド』を参照してください。 共通デバイス設定の設定値を参照するには、[詳細の表示(View Details)] リンクをクリックします。 |
||||||
[電話ボタンテンプレート(Phone Button Template)] |
このグループ内の全電話機のボタン テンプレートを選択します。 ボタン テンプレートによって、ボタンの識別(回線、スピード ダイヤル)と電話機上のボタンの位置が決まります。 ボタン テンプレートには、拡張モジュールが含まれます。 |
||||||
[ソフトキーテンプレート(Softkey Template)] |
このグループ内のすべての電話機に使用されるソフトキー テンプレートを選択します。 |
||||||
[共通の電話プロファイル(Common Phone Profile)] |
ドロップダウン リスト ボックスで、使用可能な共通の電話プロファイルのリストから、共通の電話プロファイルを選択します。 |
||||||
[コーリングサーチスペース(Calling Search Space)] |
このグループの電話機またはポートのコーリング サーチ スペースを選択します。 コーリング サーチ スペースは、ルート パーティションの集合を指定するものです。ルート パーティションの集合は、ダイヤルされた番号のルーティング方法を決定するために検索されます。 |
||||||
[AARコーリングサーチスペース(AAR Calling Search Space)] |
自動代替ルーティング(AAR)の実行時にデバイスが使用するコーリング サーチ スペースを選択します。 AAR コーリング サーチ スペースは、帯域幅不足によってコールがブロックされないように、収集された(発信)番号のルーティング方法を決定するために検索されるルート パーティションの集合を指定します。 |
||||||
[メディアリソースグループリスト(Media Resource Group List)] |
このグループの電話機またはポートのメディア リソース グループ リスト(MRGL)を選択します。 MRGL は、優先順位が付けられたメディア リソース グループのリストを指定します。 アプリケーションは、MRGL に定義されている優先順位に従って、使用可能なメディア リソースの中から、必要なメディア リソースを選択できます。 |
||||||
[ユーザ保留MOH音源(User Hold MOH Audio Source)] |
このグループの電話機またはポートのユーザ保留オーディオ ソースを選択します。 ユーザ保留オーディオ ソースは、ユーザがコールを保留にしたときに再生される音楽のオーディオ ソースを特定します。 |
||||||
[ネットワーク保留MOH音源(Network Hold MOH Audio Source)] |
このグループの IP Phone またはポートのネットワーク保留オーディオ ソースを選択します。 ネットワーク保留オーディオ ソースは、システムがコールを保留にするとき(たとえば、ユーザがコールを転送したときや、コール パークにしたとき)に再生される音楽のオーディオ ソースを特定します。 |
||||||
[ロケーション(Location)] |
このグループの IP Phone またはポートの適切なロケーションを選択します。 ロケーションは、このロケーションとの間のコールに使用可能な帯域幅の合計を指定します。 ロケーションを [なし(None)] に設定すると、ロケーション機能がこの Cisco IP Phone の消費する帯域幅を管理しないことを示します。 |
||||||
[AARグループ(AAR Group)] |
このデバイスの自動代替ルーティング(AAR)グループを選択します。 AAR グループは、帯域幅不足のためにコールがブロックされないように、コールをルーティングするためのプレフィックス番号を提供します。 AAR グループを [<なし(None)>] に設定すると、ブロックされたコールの再ルーティングは行われません。 |
||||||
[ユーザロケール(User Locale)] |
このグループの IP Phone に関連付ける国/地域と言語の組み合わせを選択します。 この選択内容によって、言語やフォントを含むロケール属性のどれをこのユーザに適用するか、およびこのユーザの Cisco Unified Communications Manager のユーザ ウィンドウと電話機をどの言語で表示するかが決まります。 |
||||||
[ネットワークロケール(Network Locale)] |
このグループの電話機に関連付けるネットワーク ロケールを選択します。 ネットワーク ロケールは、シスコのゲートウェイと電話機が、特定地域の PSTN およびその他のネットワークと通信するときに使用するトーンと断続周期を提供します。 |
||||||
[ビルトインブリッジ(Built In Bridge)] |
[ビルトインブリッジ(Built In Bridge)] ドロップダウン リスト ボックスを使用する([オン(On)]、[オフ(Off)]、または [デフォルト(Default)] を選択する)ことにより、割り込み機能のビルトイン会議ブリッジを使用可能または使用不可にします。 設定情報の詳細については、『 Cisco Unified Communications Manager 機能およびサービス ガイド』の「割り込みとプライバシー」を参照してください。 |
||||||
[プライバシ(Privacy)] |
プライバシーを必要とする各電話機について、[プライバシ(Privacy)] ドロップダウン リスト ボックスで [オン(On)] を選択します。 設定情報の詳細については、『 Cisco Unified Communications Manager 機能およびサービス ガイド』の「割り込みとプライバシー」を参照してください。 |
||||||
[デバイスモビリティモード(Device Mobility Mode)] |
ドロップダウン リスト ボックスから、このデバイスに対してデバイス モビリティ機能のオン/オフを切り替えるか、[デフォルト(Default)] を選択してデフォルトのデバイス モビリティ モードを使用します。 [現在のデバイスモビリティ設定の表示(View Current Device Mobility Settings)] をクリックすると、次のデバイス モビリティ パラメータの現在の値が表示されます。
|
||||||
[オーナーのユーザID(Owner User ID)] |
プライマリ電話機ユーザのユーザ ID を入力します。 |
||||||
[モビリティユーザID(Mobility User ID)] (デュアルモード フォンのみ) |
ドロップダウン リスト ボックスから、このデュアルモード フォンが割り当てられているユーザのユーザ ID を選択します。
|
||||||
[電話機のパーソナライゼーション(Phone Personalization)] |
ドロップダウン リスト ボックスで電話機のパーソナライゼーションを有効または無効にするか、[デフォルト(Default)] を選択して共通の電話プロファイルに設定されている電話機のパーソナライゼーションを使用します。 次のオプションのいずれかを選択できます。 |
||||||
[サービスのプロビジョニング(Services Provisioning)] |
ドロップダウン リスト ボックスにある次の値から、使用するサービスのプロビジョニングの設定値を選択します。 このパラメータでは、電話機が設定ファイル(内部)からプロビジョニングされたサービスまたはサービス URL(外部の URL)から受信したサービスを使用するか、あるいはその両方を使用するかを制御します。 [外部URL(External URLs)] では、サード パーティのプロビジョニング サーバとの下位互換性を確保します。 [両方(Both)] オプションを使用すると、設定ファイルで指定されたサービスを登録できます。また、外部のプロビジョニング サーバからサービスを追加することもできます。 これは必須フィールドです。 |
||||||
[電話ロード名(Phone Load Name)] |
該当する場合は、カスタム電話機ロードを入力します。
Cisco IP Phone ソフトウェアおよび設定の詳細については、電話機モデルに対応する『Cisco IP Phone Administration Guide for Cisco Unified Communications Manager』を参照してください。 |
||||||
[ワンボタン割込み(Single Button Barge)] |
ドロップダウン リスト ボックスで、このデバイスに対してワンボタン割り込み/C 割り込み機能を有効または無効にするか、[デフォルト(Default)] を選択してサービス パラメータ設定を使用します。 |
||||||
[回線をまたいで参加(Join Across Lines)] |
ドロップダウン リスト ボックスで、このデバイスに対して回線をまたいで参加機能を有効または無効にするか、[デフォルト(Default)] を選択してサービス パラメータ設定を使用します。 |
||||||
[信頼されたリレーポイントを使用(Use Trusted Relay Point)] |
ドロップダウン リスト ボックスで、 Cisco Unified Communications Manager が信頼されたリレーポイント(TRP)のデバイスをこのメディア エンドポイントで挿入するかどうかについて、有効化または無効化を指定します。 次のいずれかの値を選択します。
信頼されたリレー ポイント(TRP)デバイスには、Trusted Relay Point というラベルの付いた MTP またはトランスコーダ デバイスが指定されます。 エンドポイントに複数のリソース(たとえば、トランスコーダや RSVP エージェント)が必要な場合は、 Cisco Unified Communications Manager により、TRP は関連付けられたエンドポイント デバイスに最も近い位置に配置されます。 エンドポイントに TRP と MTP の両方が必要な場合、TRP は必須の MTP として使用されます。
|
||||||
[BLFオーディオアラート設定(電話がアイドルのとき)(BLF Audible Alert Setting (Phone Idle))] |
ドロップダウン リスト ボックスにある次の値から、使用する BLF オーディオ アラートの設定値を選択します。 コールがビジー ランプ フィールド(BLF)ボタンでモニタされている回線のいずれかに着信した場合、このパラメータで現在アイドルの電話機にオーディオ アラートとビジュアル アラートを送信します。 これは必須フィールドです。 |
||||||
[BLFオーディオアラート設定(電話がビジーのとき)(BLF Audible Alert Setting (Phone Busy))] |
この必須フィールドでは、コールがビジー ランプ フィールド(BLF)ボタンでモニタされている回線のいずれかに着信した場合、このパラメータで現在使用中の電話機にオーディオ アラートとビジュアル アラートを送信します。 ドロップダウン リスト ボックスにある次の値から、使用する BLF オーディオ アラートの設定値を選択します。 |
||||||
[常にプライム回線を使用する(Always Use Prime Line)] |
ドロップダウン リスト ボックスから、次のオプションのいずれかを選択します。
|
||||||
[ボイスメッセージには常にプライム回線を使用する(Always Use Prime Line for Voice Message)] |
ドロップダウン リスト ボックスから、次のオプションのいずれかを選択します。
|
||||||
[位置情報(Geo Location)] |
ドロップダウン リスト ボックスから、位置情報を選択します。 未指定の位置情報を選択できます。これは、このデバイスを位置情報に関連付けないことを示します。 メニュー オプションで設定された位置情報を選択することもできます。 |
||||||
[機能管理ポリシー(Feature Control Policy)] |
このグループの電話機の機能管理ポリシーを選択します。 機能管理ポリシーは、機能のアピアランスおよび電話機に表示される関連付けられたソフトキーを指定します。 |
||||||
[デバイスセキュリティモード(Device Security Mode)] |
ドロップダウン リスト ボックスから、デバイスに設定するモードを選択します。 [システムデフォルトの使用(Use System Default)]:電話機はエンタープライズ パラメータのデバイス セキュリティ モードに指定された値を使用します。 [非セキュア(Non-secure)]:電話機にセキュリティ機能はありません。 TCP 接続が Cisco Unified Communications Manager に対して開きます。 [認証のみ(Authenticated)]: Cisco Unified Communications Manager は電話機の整合性と認証を提供します。 NULL/SHA を使用する TLS 接続を開始します。 [暗号化(Encrypted)]: Cisco Unified Communications Manager は、電話の整合性、認証、および暗号化を提供します。 AES128/SHA を使用する TLS 接続を開始します。 このフィールドが表示されるのは、電話機モデルが認証または暗号化をサポートしている場合だけです。 |
||||||
[ビデオコールをオーディオとして再試行(Retry Video Call as Audio)] |
このチェックボックスは、コールを受信するビデオ エンドポイントだけに適用されます。 この電話機が、ビデオとして接続しないコールを受信すると、そのコールはオーディオ コールとして接続しようとします。 このチェックボックスはデフォルトでオンになっています。このデバイスは、ビデオ コールをコール制御に送信して再ルーティングする直前に、オーディオ コールとして(ビデオ コールとして接続できない場合)そのビデオ コールをリトライします。 このチェックボックスをオフにすると、ビデオとして接続に失敗したビデオ コールは、オーディオ コールとしての確立を試行しません。 この場合、コールはコール制御を行えず、コール制御は自動代替ルーティング(AAR)やルート リスト、ハント リストによってコールをルーティングします。 |
||||||
[プレゼンテーションインジケータを無視(内線コールのみ)(Ignore Presentation Indicators (Internal Calls Only))] |
コールごとにコール表示制限を設定するには、このチェックボックスをオンにします。 このチェックボックスをオンにすると、 Cisco Unified Communications Manager は内部コールに対して受信したすべての表示制限を無視します。 |
||||||
[CTIからのデバイスの制御を許可(Allow Control of Device from CTI)] |
このチェックボックスをオンにすると、CTI で制御可能なすべてのデバイスを CTI から制御できます。 このチェックボックスは、CTI で制御可能なデバイスタイプおよびデバイスプロトコルに基づいて、オンまたはオフにできます。 たとえば、SIP プロトコルを使用する 7975 は CTI ではサポートされていないので、チェックボックスをオフにする必要があります。 SCCP プロトコルを使用する 7975 は CTI でサポートされているので、チェックボックスをオンにする必要があります。 |
||||||
[ハントグループにログイン(Logged Into Hunt Group)] |
このチェックボックスは、デフォルトですべての電話機に対してオンになり、電話機が現在ハント リスト(グループ)にログインしていることを示します。 電話機がハント リストに追加されたときに、管理者はこのチェックボックスをオン(オフ)にすることにより、ユーザをログインまたはログアウトさせることができます。 ユーザは電話機のソフトキーを使用して、その電話機をハント リストにログインさせ、またはハント リストからログアウトさせます。 |
||||||
[リモートデバイス(Remote Device)] |
SCCP を介した接続で、リモート サイトへの接続時間が遅延する場合、[電話の設定(Phone Configuration)] ウィンドウにある [リモートデバイス(Remote Device)] チェックボックスをオンにします。 このチェックボックスをオンにすると、Cisco Unified Communications Manager では、電話デバイスが登録されたときにバッファを割り当て、電話機に SCCP メッセージを組み込みます。 この機能はリソースを消費するため、SCCP を実行している電話機にシグナリングの遅延が生じている場合にだけ、このチェックボックスをオンにしてください。 このオプションは、ほとんどのユーザには必要ありません。 |
||||||
[保護されたデバイス(Protected Device)] |
このチェックボックスをオンにして、電話機を"保護された"デバイスとして指定します。 これにより、コールが暗号化されていて、かつ、両方の電話機が保護されたデバイスとして設定されている場合、電話機では、2 秒間のトーンを再生し、ユーザに通知することができます。 このトーンは、コールが応答されたときに両方の電話機で再生されます。 このトーンが再生されるのは、両方の電話機が「保護」になっていて、暗号化メディアを介してコールが発信された場合だけです。
|
||||||
[ホットラインデバイス(Hotline Device)] |
このデバイスをホットライン デバイスにするには、このチェックボックスをオンにします。 ホットライン デバイスは、他のホットライン デバイスにだけ接続できます。 この機能は、オフフックになると自動的に 1 つの電話番号をダイヤルするように電話機を設定する PLAR の拡張機能です。 ホットラインでは、PLAR を使用するデバイスに適用できる制限事項が追加されます。 ホットラインを実装するには、補足サービス ソフトキーのないソフトキー テンプレートを作成して、ホットライン デバイスに適用する必要もあります。 |
||||||
[番号表示トランスフォーメーション(Number Presentation Transformation)] |
|||||||
[この電話からのコールの発信者ID(Caller ID for Calls from This Phone)] |
|||||||
[発呼側トランスフォーメーションCSS(Calling Party Transformation CSS)] |
ドロップダウン リストボックスで、この電話機が通話を開始したときに適用する発呼側のトランスフォーメーション パターンが含まれているコーリング サーチ スペース(CSS)を選択します。 この電話機がコールを開始すると、Unified Communications Manager は一致した発呼側のトランスフォーメーション パターンで構成された番号トランスフォーメーションを使用して、発呼側を変換します。 この設定を使用すると、Unified Communications Manager がコールをルーティングする前に、発呼側の番号を変換することが可能です。 たとえば、トランスフォーメーション パターンにより、電話の内線番号を E.164 の番号に変えることができます。 ユーザが番号の代わりに URI を使用してダイヤルする際は、一般的にこの設定が行われます。 ユーザが番号を使用してダイヤルする場合、Unified Communications Manager はさまざまなパターンで発呼側のトランスフォーメーションを可能にします。この設定は、ユーザが URI を使用してダイヤルした場合でも、同様のトランスフォーメーション プロビジョニングを提供します。 |
||||||
[デバイスプールの発呼側トランスフォーメーションCSSを使用(Use Device Pool Calling Party Transformation CSS)]([この電話からのコールの発信者ID(Caller ID for Calls from This Phone)]) |
この電話機から開始された発呼側のコールを変換するため、この電話機が属しているデバイス プールに設定されている [発呼側トランスフォーメーションCSS(Calling Party Transformation CSS)] を使用するには、このチェックボックスをオンにします。 デバイス プールでは、[電話の設定(Phone Settings)] の [発呼側トランスフォーメーションCSS(Calling Party Transformation CSS)] が、この電話機から開始された発呼側のコールを変換するために使用されます。 この設定ウィンドウに表示される [発呼側トランスフォーメーションCSS(Calling Party Transformation CSS)] の設定を適用する場合は、チェックボックスをオフのままにしておきます。 |
||||||
[リモート番号トランスフォーメーション(Remote Number Transformation)] |
|||||||
[発呼側トランスフォーメーションCSS(Calling Party Transformation CSS)] |
ドロップダウン リスト ボックスで、この電話機で受信したコールのリモート コール番号に対して適用する発呼側のトランスフォーメーション パターンが含まれているコーリング サーチ スペース(CSS)を選択します。 Unified Communications Manager は一致した発呼側のトランスフォーメーション パターンで構成された番号トランスフォーメーションを使用して、デバイスに提示する前にリモート コール番号を変換します。 たとえば、トランスフォーメーション パターンでは、E.164 形式のリモート番号をローカライズ バージョンに変更することができます。 この設定を使用して、この電話機から開始されたダイレクト コールのリモート接続番号を変換します。 また、この設定は、コールの方向に関係なく、機能の呼び出し後にリモート接続番号を変換する場合にも使用されます。 リモート接続番号のトランスフォーメーションは、Cisco Call Manager サービスの Advanced セクションにある、Apply Transformations on Remote Number サービス パラメータを使用して制御されます。 詳細については、このパラメータの説明を参照してください。 |
||||||
[デバイスプールの発呼側トランスフォーメーションCSSを使用(Use Device Pool Calling Party Transformation CSS)]([デバイスモビリティ関連情報(Device Mobility Related Information)]) |
リモート コールとリモート接続番号を変換するため、この電話機が属しているデバイス プールに設定されている [発呼側トランスフォーメーションCSS(Calling Party Transformation CSS)] を適用するには、このチェックボックスをオンにします。 デバイス プールでは、[デバイスモビリティ関連情報(Device Mobility Related Information)] セクションの [発呼側トランスフォーメーションCSS(Calling Party Transformation CSS)] が、リモート コールとリモート接続番号を変換するために使用されます。 リモート番号を変換するため、この設定ウィンドウに表示される [発呼側トランスフォーメーションCSS(Calling Party Transformation CSS)] の設定を適用する場合は、チェックボックスをオフのままにしておきます。 |
||||||
[関連付けられたモビリティID(Associated Mobility Identity)]:これらのモビリティ用フィールドは、Nokia S60 デバイスおよび Cisco Unified Mobile Communicator 電話機だけで利用可能です。 [新規携帯IDの追加(Add New Mobile Identity)] リンクをクリックして、[携帯IDの設定(Mobile Identity Configuration)] ページを表示します。 |
|||||||
[名前(Name)] |
携帯 ID を識別する名前を入力します。 |
||||||
[接続先番号(Destination Number)] |
携帯 ID に対応する電話番号を入力します。 市外局番のほか、外線へのアクセスに必要な追加の番号があればすべて含めます。 最大フィールド長は 24 文字です。値として使用できるのは、0 ~ 9 の数字、*、および # です。 スマート フォンの宛先の発信者 ID を設定することをお勧めします。 接続先番号のルーティングに必要なトランスレーション パターンまたはルート パターンを追加してください。 |
||||||
[呼び出し開始タイマー(Answer Too Soon Timer)] |
携帯電話が応答されるまでに経過する最短時間(ミリ秒)。 範囲:0 ~ 10,000 ミリ秒 デフォルト:1,500 ミリ秒 |
||||||
[呼び出し終了タイマー(Answer Too Late Timer)] |
携帯電話が応答されるまでに経過する最長時間(ミリ秒)。 範囲:10,000 ~ 300,000 ミリ秒 デフォルト:19,000 ミリ秒 |
||||||
[呼び出し前の遅延タイマー(Delay Before Ringing Timer)] |
コールがデスク電話から携帯電話に転送された場合、携帯電話で呼び出し音が鳴るまでに経過する時間を入力します。 範囲:0 ~ 30,000 ミリ秒 デフォルト:4,000 ミリ秒 |
||||||
[時刻アクセス(Time of Day Access)] |
ドロップダウン リスト ボックスから、この宛先に関連付けられた時刻アクセス レコードを選択します。 |
||||||
[タイムゾーン(Time Zone)] |
ドロップダウン リスト ボックスから、リモート接続先用に使用するタイム ゾーンを選択します。
|
||||||
[携帯電話(Mobile Phone)] |
デスク電話で応答されたコールをリモート接続先として携帯電話に転送する場合、このチェックボックスをオンにします。
|
||||||
[Cisco Unified Mobilityの有効化(Enable Cisco Unified Mobility)] |
このチェックボックスをオンにすると、コールの着信時にデスク電話とリモート接続先で同時に呼び出し音を鳴らすことができます。 |
||||||
[関連付けられたリモート接続先(Associated Remote Destinations)]:[新規リモート接続先の追加(Add a New Remote Destination)] リンクをクリックすると、[リモート接続先の設定(Remote Destination Configuration)] ページが表示されます。 |
|||||||
[名前(Name)] |
リモート接続先を識別する名前を入力します。 |
||||||
[接続先番号(Destination Number)] |
接続先の電話番号を入力します。 市外局番のほか、外線へのアクセスに必要な追加の番号があればすべて含めます。 最大フィールド長は 24 文字です。値として使用できるのは、0 ~ 9 の数字、*、および # です。 リモート接続先の発信者 ID を設定することをお勧めします。 接続先番号のルーティングに必要なトランスレーション パターンまたはルート パターンを追加してください。 |
||||||
[呼び出し開始タイマー(Answer Too Soon Timer)] |
携帯電話が応答されるまでに経過する最短時間(ミリ秒)。 範囲:0 ~ 10,000 ミリ秒 デフォルト:1,500 ミリ秒 |
||||||
[呼び出し終了タイマー(Answer Too Late Timer)] |
携帯電話が応答されるまでに経過する最長時間(ミリ秒)。 範囲:10,000 ~ 300,000 ミリ秒 デフォルト:19,000 ミリ秒 |
||||||
[呼び出し前の遅延タイマー(Delay Before Ringing Timer)] |
コールがデスク電話から携帯電話に転送された場合、携帯電話で呼び出し音が鳴るまでに経過する時間を入力します。 範囲:0 ~ 30,000 ミリ秒 デフォルト:4,000 ミリ秒 |
||||||
[時刻アクセス(Time of Day Access)] |
ドロップダウン リスト ボックスから、リモート接続先に関連付けられた時刻アクセス レコードを選択します。 |
||||||
[タイムゾーン(Time Zone)] |
ドロップダウン リスト ボックスから、リモート接続先用に使用するタイム ゾーンを選択します。
|
||||||
[携帯電話(Mobile Phone)] |
デスク電話で応答されたコールをリモート接続先として携帯電話に転送する場合、このチェックボックスをオンにします。
|
||||||
[Cisco Unified Mobilityの有効化(Enable Cisco Unified Mobility)] |
このチェックボックスをオンにすると、コールの着信時にデスク電話とリモート接続先で同時に呼び出し音を鳴らすことができます。 |
||||||
[プロトコル固有情報(Protocol Specific Information)] |
|||||||
[パケットキャプチャモード(Packet Capture Mode)] |
ドロップダウン リスト ボックスから、信号パケット キャプチャに設定するモードを選択します。 |
||||||
[パケットキャプチャ時間(Packet Capture Duration)] |
パケット キャプチャの時間を分単位で入力します。 最大 300 分の継続時間を入力できます。 デフォルトの継続時間は 60 分です。 |
||||||
[BLFプレゼンスグループ(BLF Presence Group)] |
BLF プレゼンス機能で使用すると、SIP または SCCP を実行する電話機は、BLF スピード ダイヤル ボタンとして電話機に設定されたプレゼンス エンティティに関するステータス(たとえば、電話番号)を要求するので、ウォッチャとして機能します。 電話機によってプレゼンス エンティティのステータスを受信するには、電話番号に適用されるプレゼンス グループのステータスを [BLFプレゼンスグループの設定(BLF Presence Group Configuration)] ウィンドウに示されるとおり表示するよう許可されている BLF プレゼンス グループを選択します。
|
||||||
[SIPダイヤルルール(SIP Dial Rules)] |
必要に応じて、適切な SIP ダイヤル ルールを選択します。 SIP ダイヤル ルールにより、SIP を実行する Cisco IP Phone 7905、7912、7940、および 7975 ではローカルのダイヤル プランを使用できるため、コールが処理される前にユーザがキーを押したりタイマーを待ったりする必要がなくなります。 ダイヤル ルールを SIP を実行する IP Phone に適用しない場合は、[SIPダイヤルルール(SIP Dial Rules)] フィールドを [<なし(None)>] のままにします。 この場合、コールを処理するには、ユーザが [ダイヤル] ソフトキーを使用するか、タイマーが期限切れになるのを待つ必要があります。 |
||||||
[デバイスセキュリティプロファイル(Device Security Profile)] |
SCCP または SIP を実行する電話機の場合は、デバイスに適用するセキュリティ プロファイルを選択します。 すべての電話で、セキュリティ プロファイルを適用する必要があります。 電話機がセキュリティをサポートしていない場合は、非セキュア プロファイルを選択します。 |
||||||
[MTP優先発信コーデック(MTP Preferred Originating Codec)] |
ドロップダウン リスト ボックスから、SIP コールにメディア ターミネーション ポイントが必要となる場合に使用するコーデックを選択します。 |
||||||
[再ルーティング用コーリングサーチスペース(Rerouting Calling Search Space)] |
ドロップダウン リスト ボックスから、再ルーティングに使用するコーリング サーチ スペースを選択します。 参照先へのルートを検索するときは、Referrer の再ルーティング コーリング サーチ スペースが使用されます。 再ルーティング コーリング サーチ スペースが原因で参照が失敗すると、Refer Primitive は「405 Method Not Allowed」メッセージによって要求を拒否します。 リダイレクション(3xx)プリミティブおよび転送機能でも、リダイレクト先または転送先を検索するときに、再ルーティング コーリング サーチ スペースが使用されます。 |
||||||
[アウトオブダイアログREFERコーリングサーチスペース(Out-Of-Dialog Refer Calling Search Space)] |
ドロップダウン リスト ボックスから、アウトオブダイアログ REFER コーリング サーチ スペースを選択します。 Cisco Unified Communications Manager は、アウトオブダイアログ(OOD)REFER 許可コーリング サーチ スペース(CSS)を使用して SIP アウトオブダイアログ REFER を許可します。 管理者は、参照側の OOD CSS を設定することによって、アウトオブダイアログ REFER の使用を制限します。 参照プリミティブでは、OOD REFER 要求を拒否し、「403 Forbidden」というメッセージを返します。 |
||||||
[SUBSCRIBEコーリングサーチスペース(SUBSCRIBE Calling Search Space)] |
プレゼンス機能で使用した場合、電話機からの登録要求を Cisco Unified Communications Manager がルーティングする方法は、SUBSCRIBE コーリング サーチ スペースによって決まります。 ドロップダウン リスト ボックスから、この目的に使用するコーリング サーチ スペースを選択します。
|
||||||
[SIPプロファイル(SIP Profile)] |
デフォルト SIP プロファイルまたは以前作成された特定のプロファイルを選択します。 SIP プロファイルは、デフォルトのテレフォニー イベント ペイロードのタイプ、登録タイマーおよびキープアライブ タイマー、メディア ポート、Iris、および動的 DNS サーバ アドレスなど、電話機の特定の SIP 情報を提供します。 |
||||||
[ダイジェストユーザ(Digest User)] |
ダイジェスト認証(SIP セキュリティ)で使用します。電話機に関連付けるエンド ユーザを選択します。 選択したユーザのダイジェスト信用証明書を設定したことを確認します([エンドユーザの設定(End User Configuration)] ウィンドウを参照)。 電話機の設定を保存し電話機をリセットした後、ユーザのダイジェスト信用証明書が、電話機の設定ファイルに追加されます。 ダイジェスト認証の詳細については、『 Cisco Unified Communications Manager セキュリティ ガイド』を参照してください。 |
||||||
[メディアターミネーションポイントが必須(Media Termination Point Required)] |
このフィールドでは、H.323 がサポートしない機能(たとえば、保留や転送)を実装するために、メディア ターミネーション ポイントを使用するかどうかを指定します。 機能を実装するために MTP を使用する場合は、[メディアターミネーションポイントが必須(Media Termination Point Required)] チェックボックスをオンにします。 機能を実装するときに MTP を使用しない場合は、[メディアターミネーションポイントが必須(Media Termination Point Required)] チェックボックスをオフにします。 このチェックボックスは、H.323 クライアント、および H.245 Empty Capabilities Set をサポートしていない H.323 デバイスだけに使用してください。または、メディア ストリーミングを 1 つのソースで終了させる場合に使用してください。 |
||||||
[不在ポート(Unattended Port)] |
このデバイス上の不在ポートを示すには、このチェックボックスをオンにします。 |
||||||
[DTMF受信が必要(Require DTMF Reception)] |
SIP および SCCP を実行している電話機の場合、この電話機に DTMF 受信が必要なときは、このチェックボックスをオンにします。 |
||||||
[RFC2833が無効(RFC2833 Disabled)] |
SCCP を実行している電話機の場合、RFC2833 サポートを使用不可にするときは、このチェックボックスをオンにします。 |
||||||
[CAPFの情報(Certification Authority Proxy Function (CAPF) Information)](これらのパラメータは、認証または暗号化のサポート機能のあるデバイスの場合にだけ表示されます) |
|||||||
[証明書の操作(Certificate Operation)] |
ドロップダウン リスト ボックスで、次のオプションの中から実行する証明書のオペレーションを選択します。 |
||||||
[認証モード(Authentication Mode)] |
ドロップダウン リスト ボックスから、証明書の操作中に電話機を CAPF で認証するために使用する認証モードを、次のオプションから選択します。
|
||||||
[認証文字列(Authentication String)] |
セキュリティ プロファイルの [認証モード(Authentication Mode)] ドロップダウン リスト ボックスで [認証ストリング(By Authentication String)] オプションを選択した場合、この設定が適用されます。 4 ~ 10 桁の数値を手動で入力します。 ローカルで有効な証明書をインストール、アップグレード、またはトラブルシューティングするには、電話機のユーザまたは管理者が認証文字列を電話機に入力する必要があります。 |
||||||
[キーサイズ(ビット)(Key Size (Bits))] |
ドロップダウン リスト ボックスで、証明書のキー サイズを次のオプションから選択します。
|
||||||
[操作の完了期限(Operation Completes By)] |
このフィールドは、[証明書の操作(Certificate Operation)] の [インストール/アップグレード(Install/Upgrade)]、[削除(Delete)]、および [トラブルシューティング(Troubleshoot)] オプションをサポートし、操作を完了させる日付および時刻を指定します。 |
||||||
[証明書の操作ステータス(Certificate Operation Status)] |
このフィールドは、認証操作の進行状況を表示します。たとえば、「<[操作タイプ(operation type)]> [待機中(pending)]、[失敗(failed)]、または [成功(successful)] です。ここで、操作タイプは [証明書の操作(Certificate Operation)] の [インストール/アップグレード(Install/Upgrade)]、[削除(Delete)]、または [トラブルシューティング(Troubleshoot)] オプションを表します。 このフィールドに表示される情報は変更できません。 |
||||||
[拡張モジュール情報(Expansion Module Information)] |
|||||||
[モジュール1(Module 1)] |
電話機に取り付けられている場合は拡張モジュールを選択します。 |
||||||
[モジュール1ロード名(Module 1 Load Name)] |
最初の Cisco Unified IP Phone Expansion Module のファームウェア ロードを入力します(該当する場合)。 デフォルト ロードを使用する場合は、このフィールドをブランクのままにします。 |
||||||
[モジュール2(Module 2)] |
電話機に取り付けられている場合は拡張モジュールを選択します。 |
||||||
[モジュール2ロード名(Module 2 Load Name)] |
2 番目の Cisco Unified IP Phone Expansion Module のファームウェア ロードを入力します(該当する場合)。 デフォルト ロードを使用する場合は、このフィールドをブランクのままにします。 |
||||||
Cisco Unified IP Phone - [外部データ位置情報(External Data Locations)] |
|||||||
[情報(Information)] |
Cisco Unified IP Phone の情報ボタンのヘルプ テキスト URL を入力します。 |
||||||
[ディレクトリ(Directory)] |
Cisco Unified IP Phone のディレクトリ サーバの URL を入力します。 |
||||||
[メッセージ(Messages)] |
Cisco Unified IP Phone のボイスメッセージのアクセス パイロット番号を入力します。 |
||||||
[サービス(Services)] |
Cisco Unified IP Phone のサービス メニューの URL を入力します。 |
||||||
[認証サーバ(Authentication Server)] |
電話機の Web サーバに対する要求を認証するときに、電話機が使用する URL を入力します。 認証 URL を指定しない場合は、認証を必要とする Cisco Unified IP Phone モデルの拡張機能は動作しません。 デフォルト値を受け入れるには、このフィールドをブランクのままにします。 デフォルトでは、この URL は、インストール時に設定された Cisco Unified Communications セルフケア ポータル ウィンドウにアクセスします。 |
||||||
[プロキシサーバ(Proxy Server)] |
電話機の HTTP クライアントから非ローカル ホスト アドレスにアクセスするために、プロキシ HTTP 要求に使用されるホストおよびポート(たとえば、proxy.cisco.com:80)を入力します。 電話機が、サービスの中で URL(たとえば、www.cisco.com)を受信するときに cisco.com ドメインで設定されていない場合、その電話機はプロキシサーバを使用してその URL にアクセスします。 cisco.com ドメインで設定されている場合、電話機は、URL と同じドメインにいるので、プロキシを使用せずに URL にアクセスします。 デフォルト値を受け入れるには、このフィールドをブランクのままにします。 |
||||||
[アイドル(Idle)] |
[アイドルタイマー(Idle Timer)] フィールドで指定された時間、電話機が使用されなかったときに、Cisco Unified IP Phone LCD スクリーンにアイドル表示として表示される XML サービスの URL を入力します。 たとえば、電話機が 5 分間使用されなかったときに、LCD スクリーンにロゴを表示できます。 デフォルト値を使用する場合には、このフィールドをブランクのままにします。 |
||||||
[アイドルタイマー(Idle Timer)] |
電話機に許容される非動作時間(秒数)を入力します。非動作のままこの時間が経過すると、電話機は [アイドル(Idle)] フィールドに指定された URL を表示します。 デフォルト値を使用する場合には、このフィールドをブランクのままにします。 |
||||||
[セキュア認証URL(Secure Authentication URL)] |
電話機の Web サーバに対する要求を検証するために、この電話機が使用するセキュア URL を入力します。
デフォルトでは、この URL は、インストール時に設定された Cisco Unified CM のユーザ オプション ウィンドウにアクセスします。 デフォルト値を受け入れるには、このフィールドをブランクのままにします。 最大長:255 |
||||||
[セキュアディレクトリURL(Secure Directory URL)] |
電話機がディレクトリ情報を取得する際の取得元となるサーバのセキュア URL を入力します。 このパラメータは、ディレクトリ ボタンを押したときに、セキュリティ保護された Cisco Unified IP Phone で使用する URL を指定します。
デフォルト値を受け入れるには、このフィールドをブランクのままにします。 最大長:255 |
||||||
[セキュアアイドルURL(Secure Idle URL)] |
[アイドルタイマー(Idle Timer)] フィールドの指定に従って電話機がアイドル状態になったときに、Cisco Unified IP Phone のディスプレイに表示する情報のセキュア URL を入力します。 たとえば、電話機が 5 分間使用されなかったときに、LCD 上にロゴを表示できます。
デフォルト値を受け入れるには、このフィールドをブランクのままにします。 最大長:255 |
||||||
[セキュア情報URL(Secure Information URL)] |
Cisco Unified IP Phone がヘルプ テキスト情報を検索できるサーバ ロケーションのセキュア URL を入力します。 この情報は、ユーザが情報([i])ボタンまたは疑問符([?])ボタンを押すと表示されます。
デフォルト値を受け入れるには、このフィールドをブランクのままにします。 最大長:255 |
||||||
[セキュアメッセージURL(Secure Messages URL)] |
メッセージ サーバのセキュア URL を入力します。 ユーザがメッセージ ボタンを押すと、Cisco Unified IP Phone はこの URL に接続されます。
デフォルト値を受け入れるには、このフィールドをブランクのままにします。 最大長:255 |
||||||
[セキュアサービスURL(Secure Services URL)] |
Cisco Unified IP Phone サービスのセキュア URL を入力します。 これは、ユーザがサービス ボタンを押したときに、セキュアな Cisco Unified IP Phone が接続される場所です。
デフォルト値を受け入れるには、このフィールドをブランクのままにします。 最大長:255 |
||||||
[エクステンションモビリティ(デバイスプロファイル)情報(Extension Mobility (Device Profile) Information)] |
|||||||
[エクステンションモビリティの有効化(Enable Extension Mobility)] |
エクステンション モビリティ機能を使用可能にする場合に、このチェックボックスをオンにします。 エクステンション モビリティを使用すると、ユーザは、Cisco IP Phone にログインおよびログアウトすることができます。 エクステンション モビリティの詳細については、『 Cisco Unified Communications Manager 機能およびサービス ガイド』を参照してください。 |
||||||
[ログアウトプロファイル(Log Out Profile)] |
エクステンション モビリティのユーザがログアウトするときに電話機がロードするプロファイルを選択します。 Cisco Unified Communications Manager の管理ページでログアウト プロファイルを設定する必要があります。 [現在のデバイス設定を使用(Use Current Device Setting)]:これを選択すると、自動生成されたデバイス プロファイルが、デフォルト デバイス プロファイルとして作成されます。 [ユーザデバイスプロファイルを選択(Select a User Device Profile)]:これを選択すると、定義済みのユーザ デバイス プロファイルが割り当てられ、このデバイスのデフォルト デバイス プロファイルになります。 選択されたユーザ デバイス プロファイルは、ログインしているユーザがいないとき、デバイスにロードされます。 |
||||||
[MLPP情報(Multilevel Precedence and Preemption (MLPP) Information)] |
|||||||
[MLPP通知(MLPP Indication)] |
(使用可能な場合)優先トーンを再生する機能のあるデバイスが、MLPP 優先コールを行うときにその機能を使用するかどうかを指定します。 ドロップダウン リスト ボックスにある次のオプションの中から、デバイスに割り当てる設定を選択します。
|
||||||
[MLPPプリエンプション(MLPP Preemption)] |
進行中のコールを優先できるデバイスが MLPP 優先コールの発信時にその優先機能を使用するかどうかを指定します(使用可能な場合)。 ドロップダウン リスト ボックスにある次のオプションの中から、デバイスに割り当てる設定を選択します。
|
||||||
[MLPPドメイン(MLPP Domain)]("0000FF" など) |
このデバイスに関連付けられている MLPP ドメインの 16 進数値を入力します。 このフィールドはブランクまたは 0 ~ FFFFFF の値である必要があります。 |
||||||
[H.323デバイス情報(H.323 Device Information)] |
|||||||
[シグナリングポート(Signaling Port)] |
このデバイスが使用する H.225 シグナリング ポートの値を指定します。 デフォルト値は 1720 です。 有効な値は 1~ 65535 です。 |
||||||
[ビデオコールをオーディオとして再試行(Retry Video Call as Audio)] |
このチェックボックスは、コールを受信するビデオ エンドポイントだけに適用されます。 この電話機が、ビデオとして接続しないコールを受信すると、そのコールはオーディオ コールとして接続しようとします。 デフォルトでは、このチェックボックスはオンになっており、送信側デバイスが、オーディオ コールとして接続していないビデオ コールを即座に再試行し、その後で再ルーティングのためにコール制御にコールを送るよう指定されています。 このチェックボックスをオフにすると、ビデオとして接続できないビデオ コールはコール制御を行えません。 この時点で、コール制御はそのコールをルート リスト内で再ルーティングします。 自動代替ルーティング(AAR)が設定され使用可能になっている場合、コール制御はルート リスト間のコールも再ルーティングします。 |
||||||
[ファーエンドH.245ターミナル機能セットを待機(Wait for Far End H.245 Terminal Capability Set)] |
デフォルトでは、このチェックボックスはオンになっています。これは、 Cisco Unified Communications Manager がデバイスと機能の交換を開始するように指定していることを意味します。 このチェックボックスは、 Cisco Unified Communications Manager が、先に遠端の H.245 ターミナル機能セットを受信してから、その H.245 ターミナル機能セットを送信する必要があることを指定します。 |
||||||
[H.323プロトコル固有情報(H.323 Protocol Specific Information)] |
|||||||
[SRTPを許可(SRTP Allowed)] |
このチェックボックスをオンにすると、ネットワークで IPSec を設定してエンド ツー エンドのセキュリティを提供する必要があります。 この設定を行わないと、キーやその他の情報が暴露されます。 |
||||||
[MTP優先発信コーデック(MTP Preferred Originating Codec)] |
ドロップダウン リスト ボックスから、SIP コールにメディア ターミネーション ポイントが必要となる場合に使用するコーデックを選択します。 |
||||||
[メディアターミネーションポイントが必須(Media Termination Point Required)] |
H.323 がサポートしていない機能(保留や転送など)の実装にメディア ターミネーション ポイント(MTP)を使用するかどうかを指示する場合に使用します。 メディア ターミネーション ポイントを使用して機能を実装する場合は [メディアターミネーションポイントが必須(Media Termination Point Required)] チェックボックスをオンにします。 メディア ターミネーション ポイントを使用して機能を実装しない場合は [メディアターミネーションポイントが必須(Media Termination Point Required)] チェックボックスをオフにします。 このチェックボックスは、H.323 クライアント、および H.245 Empty Capabilities Set をサポートしていない H.323 デバイスだけに使用してください。または、メディア ストリーミングを 1 つのソースで終了させる場合に使用してください。 このチェックボックスをオンにして MTP を要求し、このデバイスがビデオ コールのエンドポイントになると、コールはオーディオ専用として機能します。 |
||||||
[H.323情報(H.323 Information)] |
|||||||
[発信者IDパターン(Outgoing Caller ID Pattern)] |
電話機への着信コールに対して、発信者 ID に使用するパターンを、0 ~ 24 桁で入力します。 |
||||||
[発呼者の選択(Calling Party Selection)] |
次のいずれかのオプションを選択して、送信される電話番号を指定します。
|
||||||
[発呼者の表示(Calling Party Presentation)] |
セントラル オフィスが発信者 ID を送信するか、非通知にするかを選択します。 |
||||||
[IE配信を表示(Display IE Delivery)] |
発呼側と着信側の名前通知サービスに対して、SETUP メッセージおよび CONNECT メッセージ内の表示情報要素(IE)を通知するには、このチェックボックスをオンにします。 |
||||||
[番号IE配信のリダイレクト - アウトバウンド(Redirecting Number IE Delivery - Outbound)] |
コールの自動転送時に最初のリダイレクト番号とコールのリダイレクト理由を知らせるために、 Cisco Unified Communications Manager からの発信 SETUP メッセージに番号 IE のリダイレクトを含めるには、このチェックボックスをオンにします。 送信 SETUP メッセージから最初の転送番号と転送理由を除外するには、チェックボックスをオフにします。 ボイスメッセージ統合だけの場合は、番号 IE のリダイレクトを使用します。 設定したボイスメッセージ システムが番号 IE のリダイレクトをサポートしている場合は、このチェックボックスをオンにします。 |
||||||
[番号IE配信のリダイレクト - インバウンド(Redirecting Number IE Delivery - Inbound)] |
番号 IE のリダイレクトをサポートするボイスメッセージ システムを統合する場合は、番号 IE のリダイレクトを使用します。 Cisco Unified Communications Manager に対する受信 SETUP メッセージの Redirecting Number IE を受理するには、このチェックボックスをオンにします。 Cisco Unified Communications Manager に対する受信 SETUP メッセージの Redirecting Number IE を除外するには、このチェックボックスをオフにします。 |
||||||
[ゲートキーパー情報(Gatekeeper Information)] |
|||||||
[ゲートキーパー名(Gatekeeper Name)] |
ドロップダウン リスト ボックスから、ゲートキーパー制御の H.323 デバイス用のゲートキーパーを選択します。
|
||||||
[E.164] |
ゲートキーパーに登録されている E.164 アドレスを選択します。
|
||||||
[テクノロジープレフィックス(Technology Prefix)] |
テクノロジー プレフィックスを入力して、gw-type-prefix コマンドの設定時に各 Cisco Unified Communications Manager システムの IP アドレスを入力する必要がないようにします。 たとえば、ゲートキーパーで次の gw-type-prefix コマンドを使用できる場合、このフィールドには次のように 1#* と入力することができます。 gw-type-prefix 1#* default-technology
|
||||||
[ゾーン(Zone)] |
ゲートキーパーで、 Cisco Unified Communications Manager が登録を行う特定のゾーンを入力します。 ゾーンには、このゾーンと別のゾーンの間のコールに使用可能な合計帯域幅を指定します。
|
||||||
[ゲートキーパー制御のH.323クライアント(Gatekeeper Controlled H.323 Client)] |
H.323 クライアント ゲートキーパーを制御対象のゲートキーパーとして設定する場合は、このチェックボックスをオンにします。 |
||||||
[サイレント(Do Not Disturb)](DND) |
|||||||
[サイレント(Do Not Disturb)] |
DND を有効にする場合は、このチェックボックスをオンにします。 |
||||||
[DNDオプション(DND Option)] |
ドロップダウン リスト ボックスで、次のいずれかの DND オプションを選択します。 |
||||||
[DND着信呼警告(DND Incoming Call Alert)] |
ドロップダウン リスト ボックスから、次のオプションのいずれかを選択します。 |
||||||
[セキュアシェル情報(Secure Shell Information)] |
|||||||
[セキュアシェルユーザ(Secure Shell User)] |
セキュア シェル ユーザのユーザ ID を入力します。 設定している電話機がセキュリティ保護されたシェルへのアクセスをサポートしていない場合、このフィールドは表示されません。 Cisco Technical Assistance Center(TAC)は、トラブルシューティングのためにセキュリティ保護されたシェルを使用します。 詳細については、TAC に問い合わせてください。 |
||||||
[セキュアシェルパスワード(Secure Shell Password)] |
セキュア シェル ユーザのパスワードを入力します。 設定している電話機がセキュリティ保護されたシェルへのアクセスをサポートしていない場合、このフィールドは表示されません。 詳細については、TAC に問い合わせてください。 |
||||||
[プロダクト固有の設定(Product Specific Configuration)] |
|||||||
デバイスの製造元が定義するモデル固有の設定フィールド |
プロダクト固有の設定では、デバイスの製造元によってモデル固有のフィールドが定義されています。 これらのフィールドは動的に設定されるため、予告なく変更される場合があります。 フィールドの説明とプロダクト固有の設定項目のヘルプを表示するには、 [プロダクト固有の設定(Product Specific Configuration)] 見出しの右側にある情報アイコン [?] をクリックして、ポップアップ ダイアログ ボックスでヘルプを表示します。 詳細な情報が必要な場合は、設定するデバイスの資料を参照するか、製造元にお問い合わせください。 |
一部のデバイス タイプには、すべての電話機設定値を必要としないものもあります。 Cisco Unified Communications Manager の管理ページで設定された値を表示するだけのフィールドもあります。 BAT ユーザ インターフェイスのアスタリスクが付いているフィールドには、値を入力する必要があります。 アスタリスクの付いていないフィールドはオプションです。
フィールド |
説明 |
||
---|---|---|---|
[電話番号情報(Directory Number Information)] |
|||
[回線テンプレート名(Line Template Name)] |
回線テンプレートの一意の名前を入力します。 このフィールドは、回線を追加する場合にのみ使用できます。既存の回線を更新する場合には使用できません。 |
||
[ルートパーティション(Route Partition)] |
電話番号が属するルート パーティションを選択します。
|
||
[説明(Description)] |
回線テンプレートの説明を入力します。 説明には、任意の言語で最大 50 文字を指定できますが、二重引用符(")、パーセント記号(%)、アンパサンド(')、または山カッコ(<>)は使用できません。 |
||
[呼び出し表示(Alerting Name)] |
共有電話番号に対するアラート中に表示される名前を表します。 非共有電話番号の場合、アラート時には [表示(Display)] フィールドに入力された名前が使用されます。 |
||
[ASCII呼び出し表示(Alerting Name ASCII)] |
このフィールドには、[呼び出し表示(Alerting Name)] フィールドと同じ情報を指定します。ただし、入力は ASCII 文字に制限されます。 Unicode(国際化)文字をサポートしないデバイスでは、[ASCII呼び出し表示(Alerting Name ASCII)] フィールドの内容が表示されます。 |
||
[アクティブ(Active)] |
このチェックボックスをオンにすると、この DN へのコールを自動転送できます(自動転送が設定されている場合)。 チェックボックスがオフの場合、DN は Cisco Unified Communications Manager で無視されます。 |
||
[電話番号の設定(Directory Number Settings)] |
|||
[ボイスメールプロファイル(Voice Mail Profile)] |
パイロット番号をこの回線の電話番号と同じにするには、このパラメータを選択します。 この機能は、この電話機に対してボイスメッセージ サーバが設定されていない場合に役立ちます。 |
||
[コーリングサーチスペース(Calling Search Space)] |
この電話番号から呼び出される番号を検索するパーティションを選択します。
|
||
[プレゼンスグループ(Presence Group)] |
プレゼンス機能で使用すると、電話番号がプレゼンス エンティティとして機能します。つまり、ウォッチャが電話番号のステータスを要求すると、電話番号のステータスがリアルタイムにデバイスに表示されます。 電話機によってプレゼンス エンティティのステータスを受信するには、ウォッチャのプレゼンス グループが、電話番号に適用されるプレゼンス グループのステータスを、[プレゼンスグループの設定(Presence Group Configuration)] ウィンドウに示されるとおりに表示するよう許可されていることを確認します。 プレゼンス機能については、『 Cisco Unified Communications Manager 機能およびサービス ガイド』を参照してください。 |
||
[ユーザ保留MOH音源(User Hold MOH Audio Source)] |
ユーザが保留ボタンを押してコールを保留にするときに再生される保留音オーディオ ソースを選択します。 |
||
[ネットワーク保留MOH音源(Network Hold MOH Audio Source)] |
システムがコールを保留にするとき(たとえば、ユーザがコールを転送する間や電話会議またはコール パークを開始する間)に再生される保留音オーディオ ソースを選択します。 |
||
[自動応答(Auto Answer)] |
次のいずれかのオプションを選択して、この電話番号の自動応答機能をアクティブにします。
共有回線を持つデバイスに自動応答を設定しないでください。 |
||
[AAR設定(AAR Settings)]:この領域のフィールドの設定で、帯域幅が不十分なために宛先に到達できない場合のコールの処理方法を指定します。 自動代替ルーティング(AAR)は、AAR 接続先マスクまたはボイスメールにルーティングされるコールを処理します。 |
|||
[AARボイスメール(AAR Voice Mail)] |
このチェックボックスをオンにすると、[ボイスメールプロファイルの設定(Voice Mail Profile Configuration)] ウィンドウの設定が使用されます。
|
||
[AAR接続先マスク(AAR Destination Mask)] |
外部電話番号マスクを使用するのではなく、この設定を使用して、ダイヤルする AAR 接続先を判定します。 |
||
[AAR CSS] |
自動代替ルーティング(AAR)の実行時にデバイスが使用するコーリング サーチ スペースを選択します。 AAR コーリング サーチ スペースは、帯域幅不足によってコールがブロックされないように、収集された(発信)番号のルーティング方法を決定するために検索されるルート パーティションの集合を指定します。 |
||
[AARグループ(AAR Group)] |
このデバイスの自動代替ルーティング(AAR)グループを選択します。 AAR グループは、帯域幅不足のためにコールがブロックされないように、コールをルーティングするためのプレフィックス番号を提供します。 AAR グループを [<なし(None)>] に設定すると、ブロックされたコールの再ルーティングは行われません。 |
||
[この接続先を不在転送履歴に保持する(Retain this destination in the call forwarding history)] |
このチェックボックスをオンにすると、コールの AAR レッグが通話履歴に表示されるようになります。 |
||
[視覚的なメッセージ受信インジケータのポリシー(Visual Message Waiting Indicator Policy)] |
このフィールドを使用してハンドセット ランプ照明ポリシーを設定します。 次のいずれかのオプションを選択します。
設定は、[共有デバイス設定の更新(Update Shared Device Settings)] チェックボックスをオンにして [選択対象を反映(Propagate Selected)] ボタンをクリックしない限り、現在のデバイスだけに適用されます (チェックボックスが表示されるのは、他のデバイスがこの電話番号を共有している場合だけです)。 |
||
[オーディオメッセージ受信インジケータのポリシー(Audible Message Waiting Indicator Policy)] |
このフィールドを使用して、オーディオ メッセージ受信インジケータのポリシーを設定します。 次のいずれかのオプションを選択します。 |
||
[コールピックアップグループオーディオアラートの設定(電話がアイドルのとき)(Call Pickup Group Audio Alert Setting (Phone Idle))] |
このフィールドで、着信コールがコール ピックアップ グループのメンバーに送信する通知のタイプが判定されます。 コールが着信した電話機で応答されない場合、コール ピックアップ グループ内のアイドルの電話機で短い呼び出し音が聞こえるか([一度鳴らす(ring once)])、または何も聞こえません([無効(disabled)])。 |
||
[コールピックアップグループオーディオアラートの設定(電話がアクティブのとき)(Call Pickup Group Audio Alert Setting (Phone Active))] |
このフィールドで、着信コールがコール ピックアップ グループのメンバーに送信する通知のタイプが判定されます。 コールが着信した電話機で応答されない場合、コール ピックアップ グループ内で使用中の電話機でビープ音のみが聞こえるか、または何も聞こえません(無効)。 |
||
[録音オプション(Recording Option)] |
このフィールドで、エージェントのライン アピアランスでの録音オプションが決定されます。 デフォルトでは、録音オプションは [コール録音を無効(Call Recording Disabled)] です。 次のいずれかのオプションを選択します。
録音オプションが [自動コール録音を有効(Automatic Call Recording Enabled)] または [アプリケーションから呼び出されたコール録音を有効(Application Invoked Call Recording Enabled)] のいずれかに設定されている場合、ライン アピアランスを録音プロファイルに関連付けることができます。 自動録音が有効な場合、アプリケーションからの録音要求は拒否されます。 |
||
[録音プロファイル(Recording Profile)] |
このフィールドで、エージェントのライン アピアランスでの録音プロファイルが決定されます。 |
||
[モニタリング用コーリングサーチスペース(Monitoring Calling Search Space)] |
スーパーバイザのライン アピアランスのモニタリング用コーリング サーチ スペースに、エージェントの回線またはデバイス パーティションを含めてエージェントをモニタできるようにします。 スーパーバイザのライン アピアランス ウィンドウでモニタリング用コーリング サーチ スペースを設定します。 ドロップダウン リスト ボックスから既存のコーリング サーチ スペースを選択します。 デフォルト値は [なし(None)] です。 |
||
[コール転送とコールピックアップの設定(Call Forward and Call Pickup Settings)] |
|||
[不在時ボイスメール転送(Forward All Voice Mail)] |
コールをボイスメール プロファイルで選択した番号に自動転送する場合は、このチェックボックスをオンにします。 このチェックボックスをオンにすると、[不在転送の接続先(Forward All Destination)] フィールドと [不在転送コーリングサーチスペース(Forward All Calling Search Space)] チェックボックスでの指定内容は無効になります。 |
||
[不在転送の接続先(Forward All Destination)] |
すべてのコールが自動転送される先の電話番号またはディレクトリ URI を入力します。
|
||
[不在転送コーリングサーチスペース(Forward All Calling Search Space)] |
コールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを選択します。
|
||
[不在転送のセカンダリコーリングサーチスペース(Secondary Calling Search Space for Forward All)] |
ドロップダウン リスト ボックスからセカンダリ コーリング サーチ スペース(CSS)を選択します。 自動転送は回線ごとの機能なので、デバイスのコーリング サーチ スペースが不明な場合は、回線のコーリング サーチ スペースを使用してコールが自動転送されます。 回線のコーリング サーチ スペースが制限的またはルーティング不能な場合、自動転送の試行が失敗します。 不在転送のセカンダリ コーリング サーチ スペースを追加すると、転送のためのソリューションとなります。 不在転送のプライマリ コーリング サーチ スペースと、不在転送のセカンダリ コーリング サーチ スペースは、不在転送を処理するときに連結されます(プライマリ CFA CSS + セカンダリ CFA CSS)。 Cisco Unified Communications Manager は、この組み合わせを使用して、CFA の宛先を検証し、コールを転送します。 |
||
[話中ボイスメール転送(内部)(Forward Busy Internal Voice Mail)] |
内部番号からのコールをボイスメール プロファイルで選択した番号に自動転送する場合は、このチェックボックスをオンにします。 このチェックボックスをオンにすると、[話中転送の接続先(内部)(Forward Busy Internal Destination)] フィールドと [話中転送コーリングサーチスペース(内部)(Forward Busy Internal Calling Search Space)] チェックボックスでの指定内容は無効になります。 |
||
[話中転送の接続先(内部)(Forward Busy Internal Destination)] |
回線が使用中のときに内線コールが自動転送される先の電話番号またはディレクトリ URI を入力します。
|
||
[話中転送コーリングサーチスペース(内部)(Forward Busy Internal Calling Search Space)] |
内線コールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを選択します。
|
||
[話中ボイスメール転送(外部)(Forward Busy External Voice Mail)] |
外部番号からのコールをボイスメール プロファイルで選択した番号に自動転送する場合は、このチェックボックスをオンにします。 このチェックボックスをオンにすると、[話中転送の接続先(外部)(Forward Busy External Destination)] フィールドと [話中転送コーリングサーチスペース(外部)(Foward Busy External Calling Search Space)] チェックボックスでの指定内容は無効になります。 |
||
[話中転送の接続先(外部)(Forward Busy External Destination)] |
回線が使用中のときに外線コールが自動転送される先の電話番号またはディレクトリ URI を入力します。
|
||
[話中転送コーリングサーチスペース(外部)(Forward Busy External Calling Search Space)] |
外線コールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを選択します。
|
||
[無応答時ボイスメール転送(内部)(Forward No Answer Internal Voice Mail)] |
内部番号からのコールをボイスメール プロファイルで選択した番号に自動転送する場合は、このチェックボックスをオンにします。 このチェックボックスをオンにすると、[無応答時転送の接続先(内部)(Forward No Answer Internal Destination)] フィールドと [無応答時転送コーリングサーチスペース(内部)(Forward No Answer Internal Calling Search Space)] チェックボックスでの指定内容は無効になります。 |
||
[無応答時転送の接続先(内部)(Forward No Answer Internal Destination)] |
電話機が応答しない場合に、内線コールが自動転送される先の電話番号またはディレクトリ URI を入力します。
|
||
[無応答時転送コーリングサーチスペース(内部)(Forward No Answer Internal Calling Search Space)] |
内線コールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを選択します。 この設定値は、システム内で設定されている場合だけ、表示されます。
|
||
[無応答時ボイスメール転送(外部)(Forward No Answer External Voice Mail)] |
コールをボイスメール プロファイルで選択した外部番号に自動転送する場合は、このチェックボックスをオンにします。 このチェックボックスをオンにすると、[無応答時転送の接続先(外部)(Forward No Answer External Destination)] フィールドと [無応答時転送コーリングサーチスペース(外部)(Forward No Answer External Calling Search Space)] チェックボックスでの指定内容は無効になります。 |
||
[無応答時転送の接続先(外部)(Forward No Answer External Destination)] |
電話機が応答しない場合に、外線コールが自動転送される先の電話番号またはディレクトリ URI を入力します。
|
||
[無応答時転送コーリングサーチスペース(外部)(Forward No Answer External Calling Search Space)] |
外線コールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを選択します。 この設定値は、システム内で設定されている場合だけ、表示されます。
|
||
[カバレッジなし時ボイスメール転送(内部)(Forward No Coverage Internal Voice Mail)] |
内部番号からのコールをボイスメール プロファイルで選択した番号に自動転送する場合は、このチェックボックスをオンにします。 このチェックボックスをオンにすると、[無応答時転送の接続先(Forward No Answer Destination)] フィールドと [無応答時転送コーリングサーチスペース(Forward No Answer Calling Search Space)] チェックボックスでの指定内容は無効になります。 |
||
[カバレッジなし時転送の接続先(内部)(Forward No Coverage Internal Destination)] |
電話機のカバレッジが対応しない場合に、内線コールが自動転送される先の電話番号またはディレクトリ URI を入力します。
|
||
[カバレッジなし時転送コーリングサーチスペース(内部)(Forward No Coverage Internal Calling Search Space)] |
内線コールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを選択します。 この設定値は、システム内で設定されている場合だけ、表示されます。
|
||
[カバレッジなし時ボイスメール転送(外部)(Forward No Coverage External Voice Mail)] |
外部番号からのコールをボイスメール プロファイルで選択した番号に自動転送する場合は、このチェックボックスをオンにします。 このチェックボックスをオンにすると、[無応答時転送の接続先(Forward No Answer Destination)] フィールドと [無応答時転送コーリングサーチスペース(Forward No Answer Calling Search Space)] チェックボックスでの指定内容は無効になります。 |
||
[カバレッジなし時転送の接続先(外部)(Forward No Coverage External Destination)] |
電話機のカバレッジが対応しない場合に、外線コールが自動転送される先の電話番号またはディレクトリ URI を入力します。
|
||
[カバレッジなし時転送コーリングサーチスペース(外部)(Forward No Coverage External Calling Search Space)] |
外線コールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを選択します。 この設定値は、システム内で設定されている場合だけ、表示されます。
|
||
[CTI障害時ボイスメール転送(Forward on CTI Failure Voice Mail)] |
[CTI障害時転送(Forward on CTI Failure)] フィールドは、CTI ルート ポイントおよび CTI ポートのみに適用されます。 この行の設定は、CTI ルート ポイントまたは CTI ポートが失敗した場合に、この CTI ルート ポイントまたは CTI ポートへの外線コールの自動転送をどのように扱うかを指定します。 このチェックボックスをオンにすると、[ボイスメールプロファイルの設定(Voice Mail Profile Configuration)] ウィンドウの設定が使用されます。 このチェックボックスをオンにすると、 Cisco Unified Communications Manager は、[接続先(Destination)] ボックスと [コーリングサーチスペース(Calling Search Space)] の設定値を無視します。 内線コールでこのチェックボックスをオンにすると、外線コールの [ボイスメール(Voice Mail)] チェックボックスが自動的にオンになります。 外線コールをボイスメッセージ システムに自動転送しない場合、外線コールの [ボイスメール(Voice Mail)] チェックボックスをオフにする必要があります。 |
||
[CTI障害時転送の接続先(Forward on CTI Failure Destination)] |
この設定は、電話番号を制御するアプリケーションが失敗した場合に、接続されなかった内線コールが自動転送される電話番号またはディレクトリ URI を指定します。 外部の電話番号を含め、ダイヤル可能な任意の電話番号を使用します。 内線コールの宛先の値を入力すると、外線コールの [接続先(Destination)] フィールドにこの値が自動的にコピーされます。 外線コールを別の宛先に自動転送する場合は、外線コールの [接続先(Destination)] フィールドに別の値を入力する必要があります。 |
||
[CTI障害時転送のコーリングサーチスペース(Forward on CTI Failure Calling Search Space)] |
この設定値は、この電話番号を使用するすべてのデバイスに適用されます。 内線コールの CSS を選択すると、外線コールの CSS 設定にこの値が自動的にコピーされます。 外線コールを別のコーリング サーチ スペースに自動転送する場合は、外線コールの CSS に別の設定値を選択する必要があります。 |
||
[無応答時の呼び出し時間(No Answer Ring Duration)] |
コールが呼び出し音を送り、応答を待つ時間(秒数)を入力します。この時間内に応答がないと、無応答時の転送着信先にコールを自動転送します。 |
||
[コールピックアップグループ(Call Pickup Group)] |
コール ピックアップ グループ名を選択してコール ピックアップ グループを指定します。コール ピックアップ グループでは、該当のピックアップ グループ番号をダイヤルすることにより、この電話番号への着信コールに応答することができます。 |
||
[パークモニタリング(Park Monitoring)] |
|||
[パークモニタリング転送非取得時の接続先(外部)(Park Monitoring Forward No Retrieve Destination External)] |
パークされている側が外部の場合、パークしたユーザの [パークモニタリング転送非取得時の接続先(外部)(Park Monitoring Forward No Retrieve Destination External)] パラメータに指定された接続先にコールが転送されます。 [パークモニタリング転送非取得時の接続先(外部)(Park Monitoring Forward No Retrieve Destination External)] フィールドの値が空の場合、パークされた側のコールはパークしたユーザの回線にリダイレクトされます。 |
||
[パークモニタリング転送非取得時の接続先(内部)(Park Monitoring Forward No Retrieve Destination Internal)] |
パークされている側が内部の場合、パークしたユーザの [パークモニタリング転送非取得時の接続先(内部)(Park Monitoring Forward No Retrieve Destination Internal)] パラメータに指定された接続先にコールが転送されます。 [パークモニタリング転送非取得時の接続先(内部)(Park Monitoring Forward No Retrieve Destination Internal)] フィールドの値が空の場合、パークされた側のコールはパークしたユーザの回線にリダイレクトされます。 |
||
[パークモニタリング復帰タイマー(Park Monitoring Reversion Timer)] |
このパラメータは、ユーザがパークしたコールを取得するようにユーザに求めるまで、Cisco Unified Communications Manager が待機する秒数を決定します。 このタイマーはユーザが電話の [パーク] ソフトキーを押すと起動し、タイマーの期限が切れるとリマインダが発行されます。 デフォルト:60 秒
|
||
[未取得時のパークモニタリング転送:内線ボイスメール(Park Monitoring Forward No Retrieve Internal Voice Mail)] |
このチェックボックスをオンにすると、[ボイスメールプロファイルの設定(Voice Mail Profile Configuration)] ウィンドウの設定が使用されます。
|
||
[パークモニタリング転送の接続先非取得時のボイスメール(外部)(Park Monitoring Forward No Retrieve Destination External Voice Mail)] |
このチェックボックスをオンにすると、[ボイスメールプロファイルの設定(Voice Mail Profile Configuration)] ウィンドウの設定が使用されます。
|
||
[パークモニタリング転送非取得時のCSS(外部)(Park Monitoring Forward No Retrieve External CSS)] |
電話番号に適用するコーリング サーチ スペースを選択します。 |
||
[パークモニタリング転送非取得時のCSS(内部)(Park Monitoring Forward No Retrieve Internal CSS)] |
電話番号に適用するコーリング サーチ スペースを選択します。 |
||
[未登録内線ボイスメールの不在転送(Forward Unregistered Internal Voice Mail)] |
このフィールドは未登録の内部 DN コールに適用されます。 コールは指定された宛先番号またはボイスメールに再ルーティングされます。 未登録の内部番号からのコールをボイスメール プロファイルで選択した番号に自動転送する場合は、このチェックボックスをオンにします。 このチェックボックスをオンにすると、[未登録内線の不在転送接続先(Forward Unregistered Internal Destination)] フィールドと [未登録内線の不在転送コーリングサーチスペース(Forward Unregistered Internal Calling Search Space)] ドロップダウン リスト ボックスでの指定内容は無効になります。 |
||
[未登録内線の不在転送接続先(Forward Unregistered Internal Destination)] |
回線が使用中のときに未登録の内線コールが自動転送される先の電話番号を入力します。 この設定値は、ダイヤル可能な任意の内部電話番号、およびこの電話番号を使用するすべてのデバイスに適用されます。 |
||
[未登録内線の不在転送CSS(Forward Unregistered Internal CSS)] |
未登録の内線コールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを選択します。 この設定値は、この電話番号を使用するすべてのデバイスに適用されます。 |
||
[未登録外線ボイスメールの不在転送(Forward Unregistered External Voice Mail)] |
このフィールドは未登録の外部 DN コールに適用されます。 コールは指定された宛先番号またはボイスメールに再ルーティングされます。
|
||
[未登録外線の不在転送接続先(Forward Unregistered External Destination)] |
回線が使用中のときに外線コールが自動転送される先の電話番号を入力します。 この設定値は、ダイヤル可能な任意の外部電話番号(制限されていない限り、外部の宛先を含む)、およびこの電話番号を使用するすべてのデバイスに適用されます。 |
||
[未登録外線の不在転送CSS(Forward Unregistered External CSS)] |
外線コールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを選択します。 この設定値は、この電話番号を使用するすべてのデバイスに適用されます。 |
||
[MLPP代替パーティの設定(Multilevel Precedence and Preemption Alternate Party Settings)] |
|||
[転送先(接続先)(Target (Destination))] |
この電話番号が優先コールを受信したが、その番号もその自動転送先もその優先コールに応答しない場合に、MLPP 優先コールが向けられる先の番号を入力します。 この値には、数字、シャープ(#)、およびアスタリスク(*)を含めることができます。 |
||
[MLPPコーリングサーチスペース(MLPP Calling Search Space)] |
ドロップダウン リスト ボックスから、代替パーティ ターゲット(宛先)番号に関連付けるコーリング サーチ スペースを選択します。 |
||
[MLPP無応答時の呼び出し時間(秒)(MLPP No Answer Ring Duration (Seconds))] |
優先コールに対してこの電話番号とその自動転送先が応答するのを待つ時間(4 ~ 30 秒)を入力します。この時間内に応答がないと、MLPP 優先コールはこの電話番号の代替パーティに向けて送られます。 Cisco Unified Communications Manager エンタープライズ パラメータの Precedence Alternate Party Timeout で設定されている値を使用する場合は、この設定をブランクのままにします。 |
||
[この電話の回線設定(Line Settings for This Phone)] |
|||
[表示(内線発信者ID)(Display (Internal Caller ID))] |
このフィールドは、ライン アピアランスに電話番号を表示しない場合だけ使用します。 回線と電話機の組み合わせに使用されているこの電話番号を識別するためのテキストを入力します。 推奨される入力値としては、上司の名前、部門名、あるいは複数の電話番号を受け持つ秘書またはアシスタントが複数の電話番号を識別できる別の適切な情報が挙げられます。 |
||
[ASCII表示(内線発信者ID)(ASCII Display (Internal Caller ID))] |
このフィールドには、[表示(内線発信者ID)(Display (Internal Caller ID))] フィールドと同じ情報を指定します。ただし、入力は ASCII 文字に制限されます。 Unicode(国際化)文字をサポートしないデバイスでは、[ASCII表示(内線発信者ID)(ASCII Display (Internal Caller ID))] フィールドの内容が表示されます。 設定は、右にあるチェックボックス([共有デバイス設定の更新(Update Shared Device Settings)])をオンにして [選択対象を反映(Propagate Selected)] ボタンをクリックしない限り、現在のデバイスだけに適用されます (右側のチェックボックスが表示されるのは、他のデバイスがこの電話番号を共有している場合だけです)。 |
||
[回線のテキストラベル(Line Text Label)] |
回線と電話機の組み合わせに使用されているこの電話番号を識別するためのテキストを入力します。
|
||
[外線電話番号マスク(External Phone Number Mask)] |
この回線からコールを行うときに発信者 ID 用に送信される電話番号(またはマスク)を入力します。 最大 24 桁の数字と文字「X」を入力できます。 X は電話番号を表し、パターンの最後に配置する必要があります。 たとえば、972813XXXX というマスクを指定すると、内線 1234 からの外線コールには発信者 ID 番号 9728131234 が表示されます。 |
||
[視覚的なメッセージ受信インジケータのポリシー(Visual Message Waiting Indicator Policy)] |
このフィールドを使用してハンドセット ランプ照明ポリシーを設定します。 次のいずれかのオプションを選択します。
設定は、[共有デバイス設定の更新(Update Shared Device Settings)] チェックボックスをオンにして [選択対象を反映(Propagate Selected)] ボタンをクリックしない限り、現在のデバイスだけに適用されます (チェックボックスが表示されるのは、他のデバイスがこの電話番号を共有している場合だけです)。 |
||
[オーディオメッセージ受信インジケータのポリシー(Audible Message Waiting Indicator Policy)] |
このフィールドを使用して、オーディオ メッセージ受信インジケータのポリシーを設定します。 次のいずれかのオプションを選択します。 |
||
[呼出音設定(電話がアイドルのとき)(Ring Setting (Phone Idle))] |
着信コールを受信し、デバイスに他のアクティブなコールがない場合の、ライン アピアランスに対する呼び出し音設定を選択します。 次のいずれかのオプションを選択します。 |
||
[呼出音設定(電話がアクティブのとき)(Ring Setting (Phone Active))] |
この電話機に異なる回線で別のアクティブ コールがあった場合に使用される呼び出し音設定を選択します。 次のいずれかのオプションを選択します。 |
||
[コールピックアップグループオーディオアラートの設定(電話がアイドルのとき)(Call Pickup Group Audio Alert Setting (Phone Idle))] |
このフィールドで、着信コールがコール ピックアップ グループのメンバーに送信する通知のタイプが判定されます。 コールが着信した電話機で応答されない場合、コール ピックアップ グループ内のアイドルの電話機で短い呼び出し音が聞こえるか([一度鳴らす(ring once)])、または何も聞こえません([無効(disabled)])。 |
||
[コールピックアップグループオーディオアラートの設定(電話がアクティブのとき)(Call Pickup Group Audio Alert Setting (Phone Active))] |
このフィールドで、着信コールがコール ピックアップ グループのメンバーに送信する通知のタイプが判定されます。 コールが着信した電話機で応答されない場合、コール ピックアップ グループ内で使用中の電話機でビープ音のみが聞こえるか、または何も聞こえません(無効)。 |
||
[録音オプション(Recording Option)] |
このフィールドで、エージェントのライン アピアランスでの録音オプションが決定されます。 デフォルトでは、録音オプションは [コール録音を無効(Call Recording Disabled)] です。 次のいずれかのオプションを選択します。
録音オプションが [自動コール録音を有効(Automatic Call Recording Enabled)] または [アプリケーションから呼び出されたコール録音を有効(Application Invoked Call Recording Enabled)] のいずれかに設定されている場合、ライン アピアランスを録音プロファイルに関連付けることができます。 自動録音が有効な場合、アプリケーションからの録音要求は拒否されます。 |
||
[録音プロファイル(Recording Profile)] |
このフィールドで、エージェントのライン アピアランスでの録音プロファイルが決定されます。 ドロップダウン リスト ボックスから既存の録音プロファイルを選択します。 録音プロファイルを作成するには、 メニュー オプションを使用します。デフォルト値は [なし(None)] です。 |
||
[モニタリング用コーリングサーチスペース(Monitoring Calling Search Space)] |
スーパーバイザのライン アピアランスのモニタリング用コーリング サーチ スペースに、エージェントの回線またはデバイス パーティションを含めてエージェントをモニタできるようにします。 スーパーバイザのライン アピアランス ウィンドウでモニタリング用コーリング サーチ スペースを設定します。 ドロップダウン リスト ボックスから既存のコーリング サーチ スペースを選択します。 デフォルト値は [なし(None)] です。 |
||
[不在着信のログを取る(Log Missed Calls)] |
このチェックボックスを使用すると、不在着信のログ機能をオンまたはオフにできます。 このチェックボックスにチェックマークが表示されている(オンになっている)場合(デフォルトの設定)、 Cisco Unified Communications Manager は電話機でのその電話番号に対する通話履歴に不在着信のログを記録します。 |
||
[不在転送CSSアクティベーションポリシー(Forward All CSS Activation Policy)] |
ドロップダウン リスト ボックスから次のオプションのいずれかを選択します。
[設定済みCSSを使用(With Configured CSS)] オプションを選択した場合、[電話番号の設定(Directory Number Configuration)] ウィンドウで明示的に設定された [不在転送コーリングサーチスペース(Forward All Calling Search Space)] で、不在転送のアクティブ化と自動転送を制御します。 [不在転送コーリングサーチスペース(Forward All Calling Search Space)] が [なし(None)] に設定されている場合、CSS は不在転送のために設定されません。 パーティションが設定された任意の電話番号への不在転送をアクティブにすることはできません。 不在転送がアクティブになっているとき、不在転送コーリング サーチ スペースと不在転送のセカンダリ コーリング サーチ スペースは変更されません。 電話番号のコーリング サーチ スペースとデバイスのコーリング サーチ スペースを組み合わせて利用する場合、[コーリングサーチスペースのアクティベーションポリシー(Calling Search Space Activation Policy)] で [アクティブなデバイス/回線CSSを使用(With Activating Device/Line CSS)] を選択します。 このオプションを使用すると、不在転送が電話機からアクティブにされている場合、[不在転送コーリングサーチスペース(Forward All Calling Search Space)] と [不在転送のセカンダリコーリングサーチスペース(Secondary Calling Search Space for Forward All)] は、電話番号のコーリング サーチ スペースとアクティブになっているデバイスのコーリング サーチ スペースで自動的に実装されます。 |
||
[保留復帰の呼び出し時間(秒)(Hold Reversion Ring Duration (seconds))] |
0 ~ 1200 の数値(両端の値も含む)を入力して、保留している電話機に戻されるコールのアラートを送信するまでの待機時間(秒)を指定します。 0 を入力すると、 Cisco Unified Communications Manager では、保留したコールを復帰する機能は呼び出されません。 |
||
[保留復帰の通知間隔(秒)(Hold Reversion Notification Interval (seconds))] |
0 ~ 1200 の数値(両端の値も含む)を入力して、保留している電話機にリマインダ アラートを送信する間隔(秒)を指定します。 0 を入力すると、 Cisco Unified Communications Manager では、リマインダ アラートは送信されません。 |
||
[パーティ参加トーン(Party Entrance Tone)] |
ドロップダウン リスト ボックスから、次のオプションのいずれかを選択します。
|
||
[複数コール/コール待機設定(Multiple Call/Call Waiting Settings)] |
|||
[コール最大数(Maximum Number of Calls)] |
クラスタ内のデバイスの 1 つの回線に対して最大 184 のコールを設定できます。ただし、デバイスが制限要因となります。 1 つの回線に対してコールの数を設定すると、別の回線に使用可能なコールが減少します。 デフォルトは 4 です。 電話機が回線ごとの複数コールを許可していない場合、デフォルトは 2 です。 CTI ルート ポイントに対しては、各ポートに対して最大 10,000 のコールを設定できます。 デフォルトは 5000 コールです。 このフィールドは [ビジートリガー(Busy Trigger)] フィールドと併せて使用します。 |
||
[ビジートリガー(Busy Trigger)] |
この設定は、[コール最大数(Maximum Number of Calls)] および [話中転送(Call Forward Busy)] と連動し、回線で表示されるコールの最大数を決定します。 [コール最大数(Maximum Number of Calls)] が 50 に設定され、[ビジートリガー(Busy Trigger)] が 40 に設定されている場合、着信コール 41 は話し中を理由として拒否されます(さらに [話中転送(Call Forward Busy)] が設定されている場合は転送されます)。 この回線が共有されている場合は、すべての回線が話し中になって、初めて着信コールが拒否されることに注意してください。 このフィールドは、CTI ルート ポイント用の [コール最大数(Maximum Number of Calls)] と併せて使用します。 デフォルトは 4500 コールです。 |
||
[このデバイスにおける転送呼の情報表示(Forwarded Call Information Display for This Device)] |
|||
[発信者名(Caller Name)] |
自動転送されたコールの受信時に、表示に発信者名を含めるには、このチェックボックスをオンにします。 デフォルトでは、このチェックボックスはオンになっています。 |
||
[発信者番号(Caller Number)] |
自動転送されたコールの受信時に、表示に発信者番号を含めるには、このチェックボックスをオンにします。 |
||
[転送元番号(Redirected Number)] |
自動転送されたコールの受信時に、表示にリダイレクトされた番号を含めるには、このチェックボックスをオンにします。 |
||
[ダイヤル番号(Dialed Number)] |
自動転送されたコールの受信時に、表示にダイヤルされた番号を含めるには、このチェックボックスをオンにします。 デフォルトの設定では、このチェックボックスはオンになっています。 |
||
[ディレクトリURI(Directory URI)] フィールド |
|||
[電話番号のURI(1-5)(URI (1-5) on Directory Number)] |
この電話機の電話番号に関連付けるディレクトリ URI を入力します。 「username@host」形式で入力してください。 最大で 47 文字の英数字によるユーザ名を入力します。 ホスト アドレスとして、IPv4 アドレスまたは完全修飾ドメイン名を入力します。 1 つの電話番号に最大 5 つのディレクトリ URI を関連付けることができます。
|
||
[電話番号のURI(1-5)ルートパーティション(URI (1-5) Route Partition on Directory Number)] |
ディレクトリ URI が属するパーティションを入力します。 ディレクトリ URI へのアクセスを制限しない場合は、フィールドを空白のままにします。 |
||
[電話番号ではURI(1-5)がプライマリ(URI (1-5) Is Primary on Directory Number)] |
このディレクトリ URI がこの内線のプライマリ ディレクトリ URI であることを示すには、「t」(True)と入力します。 逆に、このディレクトリ URI がこの内線のプライマリ ディレクトリ URI ではないことを示すには、「f」(False)と入力します。
|
次の表で、インターコム テンプレートを BAT 電話機、ゲートウェイ、または UDP テンプレートに追加する場合に表示されるフィールドすべてについて説明します。 一部のデバイス タイプには、すべての電話機設定値を必要としないものもあります。 Cisco Unified Communications Manager の管理ページで設定された値を表示するだけのフィールドもあります。 BAT ユーザ インターフェイスのアスタリスクが付いているフィールドには、値を入力する必要があります。 アスタリスクの付いていないフィールドはオプションです。
フィールド |
説明 |
||||
---|---|---|---|---|---|
[インターコム電話番号情報(Intercom Directory Number Information)] |
|||||
[インターコムテンプレート名(Intercom Template Name)] |
インターコム テンプレートの一意の名前を入力します。 |
||||
[ルートパーティション(Route Partition)] |
電話番号が属するルート パーティションを選択します。
|
||||
[説明(Description)] |
電話番号およびルート パーティションの説明を入力します。 説明には、任意の言語で最大 50 文字を指定できますが、二重引用符("")、パーセント記号(%)、アンパサンド(')、または山カッコ(<>)は使用できません。 |
||||
[表示(内線発信者ID)(Display (Internal Caller ID))] |
このフィールドは、ライン アピアランスに電話番号を表示しない場合だけ使用します。 回線と電話機の組み合わせに使用されているこの電話番号を識別するためのテキストを入力します。 推奨される入力値としては、上司の名前、部門名、あるいは複数の電話番号を受け持つ秘書またはアシスタントが複数の電話番号を識別できる別の適切な情報が挙げられます。 |
||||
[ASCII表示(内線発信者ID)(ASCII Display (Internal Caller ID))] |
このフィールドには、[表示(内線発信者ID)(Display (Internal Caller ID))] フィールドと同じ情報を指定します。ただし、入力は ASCII 文字に制限されます。 Unicode(国際化)文字をサポートしないデバイスでは、[ASCII表示(内線発信者ID)(ASCII Display (Internal Caller ID))] フィールドの内容が表示されます。 設定は、右にあるチェックボックス([共有デバイス設定の更新(Update Shared Device Settings)])をオンにして [選択対象を反映(Propagate Selected)] ボタンをクリックしない限り、現在のデバイスだけに適用されます (右側のチェックボックスが表示されるのは、他のデバイスがこの電話番号を共有している場合だけです)。 |
||||
[回線のテキストラベル(Line Text Label)] |
回線と電話機の組み合わせに使用されているこの電話番号を識別するためのテキストを入力します。
|
||||
[呼び出し表示(Alerting Name)] |
共有電話番号に対するアラート中に表示される名前を表します。 非共有電話番号の場合、アラート時には [表示(Display)] フィールドに入力された名前が使用されます。 |
||||
[ASCII呼び出し表示(Alerting Name ASCII)] |
このフィールドには、[呼び出し表示(Alerting Name)] フィールドと同じ情報を指定します。ただし、入力は ASCII 文字に制限されます。 Unicode(国際化)文字をサポートしないデバイスでは、[ASCII呼び出し表示(Alerting Name ASCII)] フィールドの内容が表示されます。 |
||||
[スピードダイヤル(Speed Dial)] |
ユーザがスピード ダイヤル ボタンを押したときにシステムによってダイヤルされる番号を入力します。 0 ~ 9 の数字、*、#、および +(国際的なエスケープ文字)を入力することができます。 |
||||
[外線電話番号マスク(External Phone Number Mask)] |
この回線からコールを行うときに発信者 ID 用に送信される電話番号(またはマスク)を入力します。 最大 24 桁の数字と文字「X」を入力できます。 X は電話番号を表し、パターンの最後に配置する必要があります。 たとえば、972813XXXX というマスクを指定すると、内線 1234 からの外線コールには発信者 ID 番号 9728131234 が表示されます。 |
||||
[インターコム電話番号の設定(Intercom Directory Number Settings)] |
|||||
[コーリングサーチスペース(Calling Search Space)] |
ドロップダウン リスト ボックスから、適切なコーリング サーチ スペースを選択します。 コーリング サーチ スペースは、この電話番号からコールが行われる番号を検索するパーティションの集合から構成されています。 選択した値は、この電話番号を使用するすべてのデバイスに適用されます。 |
||||
[プレゼンスグループ(Presence Group)] |
このフィールドにはプレゼンス機能を設定します。 ドロップダウン リスト ボックスから、この電話番号に対するプレゼンス グループを選択します。 選択されたグループでは、この電話番号をモニタできるデバイス、エンド ユーザ、およびアプリケーション ユーザが指定されます。 |
||||
[自動応答(Auto Answer)] |
次のいずれかのオプションを選択して、この電話番号の自動応答機能をアクティブにします。
|
||||
[デフォルトのアクティブデバイス(Default Activated Device)] |
ドロップダウン リスト ボックスから、電話番号に対するデフォルトのアクティブ デバイスを選択します。 電話番号がデフォルトでアクティブになっている電話機を指定します。 ドロップダウン リストには、インターコムをサポートしているデバイスのみが表示されます。
|
BAT とともに使用するよう設計された Microsoft Excel スプレッドシートを使用して、新しい電話機または IP テレフォニー デバイスをシステムに追加することができます。 この BAT スプレッドシートは、選択されたデバイスのオプションを自動的に調整するマクロを備えています。
BAT スプレッドシートを使用して、CSV データ ファイルを作成します。 スプレッドシート内でファイル形式を定義することができるので、BAT スプレッドシートはデータ ファイル形式を使用して CSV データ ファイルのフィールドを表示します。
(注) |
いずれかのフィールドにカンマを入力した場合、BAT.xlt を使用して BAT 形式にエクスポートするときに、そのフィールド エントリは二重引用符で囲まれます。 BAT スプレッドシートにブランク行を入力すると、その空の行はファイルの終わりとして扱われ、ブランク行の後に入力されているデータは BAT 形式に変換されません。 |
CTI ポートを追加する際に、ダミー MAC アドレス オプションを使用することができます。 このオプションを使用すると、ダミー MAC アドレスの形式で、CTI ポートごとに固有のデバイス名が指定されます。このダミー MAC アドレスは、後で、 Cisco Unified Communications Manager の管理ページまたは Unified CM Auto-Register Phone Tool を使用して手動で更新できます。 H.323 クライアント、VGC Phone、および VGC Virtual Phone には、ダミー MAC アドレス オプションを使用しないでください。
ダミー MAC アドレス オプションでは、次の形式のダミー MAC アドレスが自動的に生成されます。
XXXXXXXXXXXX
ここで、X は任意の 12 文字の 16 進数(0 ~ 9 および A ~ F)を表します。
BAT スプレッドシートで電話機に関して定義する回線およびスピード ダイヤルの数は、BAT 電話テンプレートで定義されている数を超えないようにしてください。この数を超えている場合、CSV データ ファイルおよび BAT テンプレートを挿入しようとするとエラーが発生します。
BAT スプレッドシートのすべてのフィールドの編集が完了したら、内容を CSV 形式のデータ ファイルにエクスポートできます。 エクスポートされる CSV 形式のデータ ファイルには、次のようなデフォルトのファイル名が割り当てられます。
<tabname>-<timestamp>.txt
ここで、<tabname> は、作成した入力ファイルのタイプ(たとえば、phones)を表し、<timestamp> は、ファイルが作成された正確な日時を表します。
エクスポートされたファイルをローカル ワークステーション上に保存したら、この CSV 形式のデータ ファイルの名前を変更することができます。
(注) |
カンマが入った CSV ファイル名(例:abcd,e.txt)は、 Cisco Unified Communications Manager サーバにアップロードできません。 |
ステップ 1 | BAT.xlt ファイルを検索し、ダブルクリックして、BAT スプレッドシートを開きます。 | ||
ステップ 2 | プロンプトが表示されたら、[マクロを有効にする] ボタンをクリックして、スプレッドシート機能を使用します。 | ||
ステップ 3 | 電話機オプションを表示するには、スプレッドシートの下部にある [電話 (Phones)] タブをクリックします。 | ||
ステップ 4 |
次のデバイス タイプのいずれかのオプション ボタンを選択します。 選択するデバイス タイプによって BAT スプレッドシート内のデータの検索条件が決まります。 スプレッドシートには、選択されたデバイスで使用可能なオプションが表示されます。 たとえば、[電話(Phones)] を選択すると、電話回線数とスピード ダイヤル数のフィールドが表示されます。 |
||
ステップ 5 |
各電話機の BAT スプレッドシートに表示するデバイスと回線のフィールドを選択します。 次の操作を行います。
|
||
ステップ 6 |
[電話回線数(Number of Phone Lines)] ボックスが表示されるまで右にスクロールし、電話機の回線数を入力します。 入力する回線数は、BAT テンプレートで設定した回線数を超えることはできません。 |
||
ステップ 7 |
電話機の [スピードダイヤルの最大数(Maximum Number of Speed Dials)] ボックスでスピード ダイヤル ボタンの数を入力する必要があります。 入力するスピード ダイヤル数は、BAT テンプレートで設定したスピード ダイヤル数を超えることはできません。 ボタン数を入力すると、各スピード ダイヤル番号用のカラムが表示されます。 |
||
ステップ 8 | [BLFスピードダイヤルの最大数(Maximum Number of BLF Speed Dials)] ボックスで、ビジー ランプ フィールド(BLF)スピード ダイヤル ボタンの数を入力します。 ボタン数を入力すると、各 BLF スピード ダイヤル番号用のカラムが表示されます。 | ||
ステップ 9 |
スプレッドシートで回線ごとに個々の電話機のデータを入力します。 すべての必須フィールド、および該当するオプション フィールドに値を入力します。 各カラムの見出しは、フィールドの長さ、およびそのフィールドが必須かオプションかを指定しています。 電話機のフィールドの説明は、表 1を参照してください。 |
||
ステップ 10 |
電話機ごとに MAC アドレスを入力しなかった場合は、[ダミーMACアドレスの作成(Create Dummy MAC Address)] チェックボックスをオンにします。
H.323 クライアント、VGC Phone、および VGC Virtual Phone には、ダミー MAC アドレス オプションを使用しないでください。 |
||
ステップ 11 |
[BAT形式にエクスポート(Export to BAT Format)] をクリックして BAT Excel スプレッドシートから CSV 形式のデータ ファイルにデータを転送します。
|
CSV データ ファイルを Cisco Unified Communications Manager の最初のノードにあるデータベース サーバにアップロードして、BAT が CSV データ ファイルにアクセスできるようにする必要があります。
次の表で、CSV データ ファイルにデバイスと回線の詳細を追加する場合に使用可能な電話機フィールドについて説明します。
フィールド |
説明 |
||||
---|---|---|---|---|---|
[デバイスフィールド(Device Fields)] |
|||||
[MACアドレス/デバイス名(MAC Address/Device Name)] |
電話機、VGC Virtual Phone、および VGC Phone の MAC アドレスを入力します。 CTI ポートまたは H.323 クライアントの固有の ID(デバイス名)を入力します。 [ダミーMACアドレスの作成(Create Dummy MAC Addresses)] チェックボックスをオンにすると、固有のデバイス ID を自動的に生成できます。 |
||||
[説明(Description)] |
電話機またはデバイスを特定する説明(たとえば、「Conference Room A」や「John Smith」)を入力します。 説明には、任意の言語で最大 50 文字を指定できますが、二重引用符(")、パーセント記号(%)、アンパサンド(&)、バックスラッシュ(\)、山カッコ(<>)は使用できません。 |
||||
[メディアリソースグループリスト(Media Resource Group List)] |
このグループの電話機またはポートのメディア リソース グループ リスト(MRGL)を入力します。 MRGL は、優先順位が付けられたメディア リソース グループのリストを指定します。 アプリケーションは、MRGL に定義されている優先順位に従って、使用可能なメディア リソースの中から、必要なメディア リソースを選択できます。 |
||||
[ユーザ保留音源(User Hold Audio Source)] |
このグループの IP Phone または CTI ポートが使用するユーザ保留オーディオ ソースを入力します。 ユーザ保留オーディオ ソースは、ユーザがコールを保留にしたときに再生される音楽のオーディオ ソースを特定します。 |
||||
[ネットワーク保留MOH音源(Network Hold MOH Audio Source)] |
このグループの IP Phone または CTI ポートが利用するネットワーク保留オーディオ ソースを入力します。 ネットワーク保留オーディオ ソースは、システムがコールを保留にするとき(たとえば、ユーザがコールを転送したときや、コール パークにしたとき)に再生される音楽のオーディオ ソースを特定します。 |
||||
[ユーザロケール(User Locale)] |
このグループの IP Phone に関連付ける国/地域と言語の組み合わせを入力します。 この選択内容によって、言語やフォントを含むロケール属性のどれをこのユーザに適用するか、およびこのユーザの Cisco Unified Communications Manager のユーザ ウィンドウと電話機をどの言語で表示するかが決まります。 |
||||
[ネットワークロケール(Network Locale)] |
このグループの電話機に関連付けるネットワーク ロケールを入力します。 ネットワーク ロケールは、シスコのゲートウェイと電話機が、特定地域の PSTN およびその他のネットワークと通信するときに使用するトーンと断続周期を提供します。 |
||||
[ソフトキーテンプレート(Softkey Template)] |
このグループ内の電話機すべてに使用されるソフトキー テンプレートを入力します。 |
||||
[共通の電話プロファイル(Common Phone Profile)] |
ドロップダウン リスト ボックスで、使用可能な共通の電話プロファイルのリストから、共通の電話プロファイルを選択します。 |
||||
[デバイスプレゼンスグループ(Device Presence Group)] |
プレゼンス機能で使用すると、SIP または SCCP を実行する電話機は、BLF スピード ダイヤル ボタンとして電話機に設定されたプレゼンス エンティティに関するステータス(たとえば、電話番号)を要求するので、ウォッチャとして機能します。 電話機によってプレゼンス エンティティのステータスを受信するには、電話番号に適用されるプレゼンス グループのステータスを [プレゼンスグループの設定(Presence Group Configuration)] ウィンドウに示されるとおり表示するよう許可されているプレゼンス グループを選択します。
|
||||
[電話ロード名(Phone Load Name)] |
該当する場合は、カスタム電話機ロードを入力します。
値は CTI ポートには適用されません。 |
||||
[セキュリティプロファイル(Security Profile)] |
デバイスに適用するセキュリティ プロファイルを入力します。 選択したプロファイルを電話機がサポートしていない場合は、 Cisco Unified Communications Manager で設定が適用できません。 すべての電話で、セキュリティ プロファイルを適用する必要があります。 電話機がセキュリティをサポートしていない場合は、非セキュア プロファイルを選択します。 |
||||
[デバイスSUBSCRIBE CSS(Device SUBSCRIBE CSS)] |
プレゼンス機能で使用した場合、電話機からの登録要求を Cisco Unified Communications Manager がルーティングする方法は、SUBSCRIBE コーリング サーチ スペースによって決まります。 この目的に使用するコーリング サーチ スペースを入力します。
|
||||
[E.164] |
ゲートキーパーに登録されている E.164 アドレスを選択します。
|
||||
[ユーザID(User ID)] |
この電話機ユーザのユーザ ID を入力します。 |
||||
[メディアリソースグループリスト(Media Resource Group List)] |
メディア リソース グループを優先順に並べたグループが表示されます。 アプリケーションは、メディア リソース リストで定義された優先順位に従って、使用可能なメディア リソースから、必要なメディア リソース、たとえば、保留音サーバを選択します。 |
||||
[AARコーリングサーチスペース(AAR Calling Search Space)] |
デバイスが自動代替ルーティング(AAR)の実行時に使用する適切なコーリング サーチ スペースを入力します。 AAR コーリング サーチ スペースは、帯域幅不足によってコールがブロックされないように、収集された(発信)番号のルーティング方法を決定するために検索されるルート パーティションの集合を指定します。 |
||||
[MLPPドメイン(MLPP Domain)] |
このデバイスに関連付けられている MLPP ドメインの 16 進数値を入力します。 ブランクまたは 0 ~ FFFFFF の値である必要があります。 |
||||
[MLPP通知(MLPP Indication)] |
(使用可能な場合)優先トーンを再生する機能のあるデバイスが、MLPP 優先コールを行うときにその機能を使用するかどうかを指定します。 |
||||
[MLPPプリエンプション(MLPP Preemption)] |
進行中のコールを優先できるデバイスが MLPP 優先コールの発信時にその優先機能を使用するかどうかを指定します(使用可能な場合)。 |
||||
[単一パケットキャプチャモード(Signal Packet Capture Mode)] |
信号パケット キャプチャに設定するモードを入力します。 |
||||
[パケットキャプチャ時間(Packet Capture Duration)] |
パケット キャプチャの時間を分単位で入力します。 最大 300 分の継続時間を入力できます。 |
||||
[認証文字列(Authentication String)] |
4 ~ 10 桁の数値を入力します。 ローカルで有効な証明書をインストール、アップグレード、またはトラブルシューティングするには、電話機のユーザまたは管理者が認証文字列を電話機に入力する必要があります。 |
||||
[プレゼンテーションインジケータを無視(Ignore Presentation Indicator)] |
「Yes」または「No」を入力して、コール表示の制限をコールごとに設定します。 このチェックボックスをオンにすると、 Cisco Unified Communications Manager は内部コールに対して受信したすべての表示制限を無視します。 |
||||
[SIPプロファイル(SIP Profile)] |
デフォルトの SIP プロファイルまたはすでに作成した特定のプロファイルを入力します。 SIP プロファイルは、デフォルトのテレフォニー イベント ペイロードのタイプ、登録タイマーおよびキープアライブ タイマー、メディア ポート、Iris、および動的 DNS サーバ アドレスなど、電話機の特定の SIP 情報を提供します。 |
||||
[ダイジェストユーザ(Digest User)] |
ダイジェスト認証(SIP セキュリティ)で使用します。電話機に関連付けるエンド ユーザを選択します。 選択したユーザのダイジェスト信用証明書を設定したことを確認します([エンドユーザの設定(End User Configuration)] ウィンドウを参照)。 電話機の設定を保存し電話機をリセットした後、ユーザのダイジェスト信用証明書が、電話機の設定ファイルに追加されます。 ダイジェスト認証の詳細については、『 Cisco Unified Communications Manager セキュリティ ガイド』を参照してください。 |
||||
[ログアウトプロファイル(Log Out Profile)] |
エクステンション モビリティのユーザがログアウトするときに電話機がロードするプロファイルを入力します。 Cisco Unified Communications Manager の管理ページでログアウト プロファイルを設定する必要があります。 [現在のデバイス設定を使用(Use Current Device Setting)]:これを選択すると、自動生成されたデバイス プロファイルが、デフォルト デバイス プロファイルとして作成されます。 [ユーザデバイスプロファイルを選択(Select a User Device Profile)]:これを選択すると、定義済みのユーザ デバイス プロファイルが割り当てられ、このデバイスのデフォルト デバイス プロファイルになります。 選択されたユーザ デバイス プロファイルは、ログインしているユーザがいないとき、デバイスにロードされます。 |
||||
[SIPコーデック、MTP優先発信コーデック(SIPCodec_MTPPreferredOrigCodec)] |
SIP コールにメディア ターミネーション ポイントが必要な場合に使用するコーデックを入力します。 |
||||
[ダイヤルルール(Dial Rules)] |
必要に応じて、適切な SIP ダイヤル ルールを入力します。 SIP ダイヤル ルールにより、SIP を実行する Cisco Unified IP Phone 7905、7912、7940、および 7975 ではローカルのダイヤル プランを使用できるため、コールが処理される前にユーザがキーを押したりタイマーを待ったりする必要がなくなります。 ダイヤル ルールを SIP を実行する IP Phone に適用しない場合は、[SIPダイヤルルール(SIP Dial Rules)] フィールドを [<なし(None)>] のままにします。 この場合、コールを処理するには、ユーザが [ダイヤル] ソフトキーを使用するか、タイマーが期限切れになるのを待つ必要があります。 |
||||
[CSS再ルーティング(CSS Reroute)] |
再ルーティングに使用するコーリング サーチ スペースを入力します。 参照側の再ルーティング用コーリング サーチ スペースが、参照側からターゲットへのルート検索に使用されます。 再ルーティング コーリング サーチ スペースが原因で参照が失敗すると、Refer Primitive は「405 Method Not Allowed」メッセージによって要求を拒否します。 リダイレクション(3xx)プリミティブおよび転送機能でも、リダイレクト先または転送先を検索するときに、再ルーティング コーリング サーチ スペースが使用されます。 |
||||
[共通電話設定(Common Phone Configuration)] |
電話機に割り当てられる共通の電話設定を入力します。 共通の電話設定には、特定のユーザに関連付けられた属性(サービスまたは機能)があります。 |
||||
[コーリングサーチスペースREFER(Calling Search Space Refer)] |
アウトオブダイアログ REFER コーリング サーチ スペースを入力します。 Cisco Unified Communications Manager は、アウトオブダイアログ(OOD)REFER 許可コーリング サーチ スペース(CSS)を使用して SIP アウトオブダイアログ REFER を許可します。 管理者は、参照側の OOD CSS を設定することによって、アウトオブダイアログ REFER の使用を制限します。 参照プリミティブでは、OOD REFER 要求を拒否し、「403 Forbidden」というメッセージを返します。 |
||||
[証明書の操作(Certificate Operation)] |
次のオプションから実行する認証操作を入力します。 |
||||
[証明書操作完了日時(Certificate Operation Completion Time)] |
このフィールドは、[証明書の操作(Certificate Operation)] の [インストール/アップグレード(Install/Upgrade)]、[削除(Delete)]、および [トラブルシューティング(Troubleshoot)] オプションをサポートし、操作を完了させる日付および時刻を指定します。 |
||||
[セキュアシェルユーザ(Secure Shell User)] |
セキュア シェル ユーザのユーザ ID を入力します。 設定している電話機がセキュリティ保護されたシェルへのアクセスをサポートしていない場合、このフィールドは表示されません。 Cisco Technical Assistance Center(TAC)は、トラブルシューティングのためにセキュリティ保護されたシェルを使用します。 詳細については、TAC に問い合わせてください。 |
||||
[セキュアシェルパスワード(Secure Shell Password)] |
セキュア シェル ユーザのパスワードを入力します。 設定している電話機がセキュリティ保護されたシェルへのアクセスをサポートしていない場合、このフィールドは表示されません。 詳細については、TAC に問い合わせてください。 |
||||
[デバイスプール(Device Pool)] |
適切なデバイス プールを入力します。 デバイス プールは、このデバイスのプロパティの集合(たとえば、Cisco Unified Communications Manager グループ、日付/時刻グループ、地域、およびデバイスの自動登録用のコーリング サーチ スペース)を指定します。 |
||||
[ビルトインブリッジ(Built-in Bridge)] |
「Off」、「On」、または「Default」を入力して、割り込み機能のためのビルトイン会議ブリッジを有効または無効にします。 設定情報の詳細については、『Cisco Unified Communications Manager 機能およびサービス ガイド』の「割り込みとプライバシー」を参照してください。 |
||||
[コーリングサーチスペース(Calling Search Space)] |
適切なコーリング サーチ スペースを入力します。 コーリング サーチ スペースは、この電話番号からコールが行われる番号を検索するパーティションの集合から構成されています。 選択した値は、この電話番号を使用するすべてのデバイスに適用されます。 コーリング サーチ スペースに関する設定情報については、『Cisco Unified Communications Manager アドミニストレーション ガイド』を参照してください。 |
||||
[ロケーション(Location)] |
この電話機に対して、適切な場所を選択します。 ロケーションに [ハブなし(Hub_None)] を設定すると、そのロケーションの機能では、この電話機が消費する帯域幅を把握しません。 |
||||
[モジュール1(Module 1)] |
適切な拡張モジュールまたは「None」を入力します。 |
||||
[モジュール1ロード名(Module 1 Load Name)] |
適切な拡張モジュール用のカスタム ソフトウェアを入力します(該当する場合)。 このフィールドに入力される値は、現在のモデルのデフォルト値を上書きします。 ファームウェア ロードがモジュール ロードと一致していることを確認してください。 |
||||
[モジュール2(Module 2)] |
適切な拡張モジュールまたは「None」を入力します。 |
||||
[モジュール2ロード名(Module 2 Load Name)] |
2 番目の拡張モジュール用のカスタム ソフトウェアを入力します(該当する場合)。 このフィールドに入力される値は、現在のモデルのデフォルト値を上書きします。 ファームウェア ロードがモジュール ロードと一致していることを確認してください。 |
||||
[電話テンプレート(Phone Template)] |
このタイプのバルク トランザクション用に作成した電話テンプレートを入力します。 |
||||
[認証サーバ(Authentication Server)] |
電話機の Web サーバに対する要求を認証するときに、電話機が使用する URL を入力します。 認証 URL を指定しない場合、認証を必要とする Cisco Unified IP Phone の拡張機能は動作しません。 デフォルト値を受け入れるには、このフィールドをブランクのままにします。 デフォルトでは、この URL は、インストール時に設定された Cisco Unified IP Phone セルフケア ポータル ウィンドウにアクセスします。 |
||||
[プロキシサーバ(Proxy Server)] |
電話機の HTTP クライアントから非ローカル ホスト アドレスにアクセスするために、プロキシ HTTP 要求に使用されるホストおよびポート(たとえば、proxy.cisco.com:80)を入力します。 電話機が、サービスの中で URL(たとえば、www.cisco.com)を受信するときに cisco.com ドメインで設定されていない場合、その電話機はプロキシサーバを使用してその URL にアクセスします。 cisco.com ドメインで設定されている場合、電話機は、URL と同じドメインにいるので、プロキシを使用せずに URL にアクセスします。 |
||||
[アイドル(Idle)] |
[アイドルタイマー(Idle Timer)] フィールドで指定された時間、電話機が使用されなかったときに、Cisco Unified IP Phone LCD スクリーンにアイドル表示として表示される XML サービスの URL を入力します。 たとえば、電話機が 5 分間使用されなかったときに、LCD スクリーンにロゴを表示できます。 |
||||
[アイドルタイマー(Idle Timer)] |
電話機に許容される非動作時間(秒数)を入力します。非動作のままこの時間が経過すると、電話機は [アイドル(Idle)] フィールドに指定された URL を表示します。 |
||||
[セキュア認証URL(Secure Authentication URL)] |
電話機の Web サーバに対する要求を検証するために、この電話機が使用するセキュア URL を入力します。
デフォルトでは、この URL は、インストール時に設定された Cisco Unified IP Phone セルフケア ポータル ウィンドウにアクセスします。 デフォルト値を受け入れるには、このフィールドをブランクのままにします。 最大長:255 |
||||
[セキュアディレクトリURL(Secure Directory URL)] |
電話機がディレクトリ情報を取得する際の取得元となるサーバのセキュア URL を入力します。 このパラメータは、ディレクトリ ボタンを押したときに、セキュリティ保護された Cisco Unified IP Phone で使用する URL を指定します。
デフォルト値を受け入れるには、このフィールドをブランクのままにします。 最大長:255 |
||||
[セキュアアイドルURL(Secure Idle URL)] |
[アイドルタイマー(Idle Timer)] フィールドの指定に従って電話機がアイドル状態になったときに、Cisco Unified IP Phone のディスプレイに表示する情報のセキュア URL を入力します。 たとえば、電話機が 5 分間使用されなかったときに、LCD 上にロゴを表示できます。
デフォルト値を受け入れるには、このフィールドをブランクのままにします。 最大長:255 |
||||
[セキュア情報URL(Secure Information URL)] |
Cisco Unified IP Phone がヘルプ テキスト情報を検索できるサーバ ロケーションのセキュア URL を入力します。 この情報は、ユーザが情報([i])ボタンまたは疑問符([?])ボタンを押すと表示されます。
デフォルト値を受け入れるには、このフィールドをブランクのままにします。 最大長:255 |
||||
[セキュアメッセージURL(Secure Messages URL)] |
メッセージ サーバのセキュア URL を入力します。 ユーザがメッセージ ボタンを押すと、Cisco Unified IP Phone はこの URL に接続されます。
デフォルト値を受け入れるには、このフィールドをブランクのままにします。 最大長:255 |
||||
[セキュアサービスURL(Secure Services URL)] |
Cisco Unified IP Phone サービスのセキュア URL を入力します。 これは、ユーザがサービス ボタンを押したときに、セキュアな Cisco Unified IP Phone が接続される場所です。
デフォルト値を受け入れるには、このフィールドをブランクのままにします。 最大長:255 |
||||
[ホットラインデバイス(Hotline Device)] |
「T」または「F」を入力します。 ホットライン デバイスは、他のホットライン デバイスにだけ接続できます。 この機能は、オフフックになると自動的に 1 つの電話番号をダイヤルするように電話機を設定する PLAR の拡張機能です。 ホットラインでは、PLAR を使用するデバイスに適用できる制限事項が追加されます。 ホットラインを実装するには、補足サービス ソフトキーのないソフトキー テンプレートを作成して、ホットライン デバイスに適用する必要もあります。 |
||||
[オーナーのユーザID(Owner User ID)] |
プライマリ電話機ユーザのユーザ ID を入力します。 |
||||
[共通の電話プロファイル(Common Phone Profile)] |
電話機に割り当てられる共通の電話プロファイルを入力します。 共通の電話プロファイルには、特定のユーザに関連付けられている属性(サービスまたは機能)が含まれています。 |
||||
[デバイスモビリティモード(Device Mobility Mode)] |
このデバイスのデバイス モビリティ機能をオンまたはオフにするか、「Default」を入力してデフォルトのデバイス モビリティ モードを使用します。 設定情報の詳細については、『 Cisco Unified Communications Manager 機能およびサービス ガイド』の「デバイス モビリティ」を参照してください。 |
||||
[DNDオプション(DND Option)] |
次のオプションから DND オプションを選択します。 |
||||
[DND着信呼警告(DND Incoming Call Alert)] |
次のオプションのいずれかを入力します。 |
||||
[プライバシ(Privacy)] |
次のオプションのいずれかを入力します。 |
||||
[信頼されたリレーポイントを使用(Use Trusted Relay Point)] |
次のオプションのいずれかを入力します。 |
||||
[情報(Information)] |
Cisco Unified IP Phone の情報ボタンのヘルプ テキスト URL を入力します。 |
||||
[ディレクトリ(Directory)] |
Cisco Unified IP Phone のディレクトリ サーバの URL を入力します。 |
||||
[メッセージ(Messages)] |
Cisco Unified IP Phone のボイスメッセージのアクセス パイロット番号を入力します。 |
||||
[サービス(Services)] |
Cisco Unified IP Phone のサービス メニューの URL を入力します。 |
||||
[発呼側トランスフォーメーションCSS(Calling Party Transformation CSS)] |
この設定により、デバイスの発呼側の番号をローカライズできるようになります。 入力した [発呼側トランスフォーメーションCSS(Calling Party Transformation CSS)] には、このデバイスに割り当てる発呼側トランスフォーメーション パターンが含まれます。 |
||||
[ワンボタン割込み(Single Button Barge)] |
次のオプションのいずれかを入力します。 |
||||
[回線をまたいで参加(Join Across Lines)] |
次のオプションのいずれかを入力します。 |
||||
[BLFオーディオアラート設定(電話がアイドルのとき)(BLF Audible Alert Setting (Phone Idle))] |
次の値から、使用する BLF オーディオ アラートの設定値を入力します。 この必須フィールドでは、コールがビジー回線フィールド(BLF)ボタンでモニタされている回線のいずれかに着信した場合、このパラメータで現在アイドルの電話機にオーディオ アラートとビジュアル アラートを送信します。 |
||||
[BLFオーディオアラート設定(電話がビジーのとき)(BLF Audible Alert Setting (Phone Busy))] |
この必須フィールドでは、次の値から、使用する BLF オーディオ アラートの設定値を入力します。 |
||||
[常にプライム回線を使用する(Always Use Prime Line)] |
次の値から、使用する [常にプライム回線を使用する(Always Use Prime Line)] の設定値を入力します。 |
||||
[ボイスメッセージには常にプライム回線を使用する(Always Use Prime Line for Voice Message)] |
次の値から、使用する [ボイスメッセージには常にプライム回線を使用する(Always Use Prime Line for Voice Message)] の設定値を入力します。 |
||||
[サービスのプロビジョニング(Services Provisioning)] |
この必須フィールドでは、次のいずれかの値を入力します。 |
||||
[電話機のパーソナライゼーション(Phone Personalization)] |
次の値のいずれかを入力します。 |
||||
[モビリティID名(Mobility Identity Name)] |
リモート接続先を識別する名前を入力します。 |
||||
[モビリティID接続先番号(Mobility Identity Destination Number)] |
接続先の電話番号を入力します。 市外局番のほか、外線へのアクセスに必要な追加の番号があればすべて含めます。 最大フィールド長は 24 文字です。値として使用できるのは、0 ~ 9 の数字、*、および # です。 リモート接続先の発信者 ID を設定することをお勧めします。 接続先番号のルーティングに必要なトランスレーション パターンまたはルート パターンを追加してください。 |
||||
[モビリティID呼び出し開始タイマー(Mobility Identity Answer Too Soon Timer)] |
携帯電話が応答されるまでに経過する最短時間(ミリ秒)。 範囲:0 ~ 10,000 ミリ秒 デフォルト:1,500 ミリ秒 |
||||
[モビリティID呼び出し終了タイマー(Mobility Identity Answer Too Late Timer)] |
携帯電話が応答されるまでに経過する最長時間(ミリ秒)。 範囲:10,000 ~ 300,000 ミリ秒 デフォルト:19,000 ミリ秒 |
||||
[モビリティID呼び出し前の遅延(Mobility Identity Delay Before Ringing Cell)] |
コールがデスク電話から携帯電話に転送された場合、携帯電話で呼び出し音が鳴るまでに経過する時間を入力します。 範囲:0 ~ 30,000 ミリ秒 デフォルト:4,000 ミリ秒 |
||||
[モビリティID時刻アクセス(Mobility Identity Time of Day Access)] |
このリモート接続先に関連付けられている時刻アクセス レコードを入力します。 |
||||
[モビリティIDタイムゾーン(Mobility Identity Time Zone)] |
このリモート接続先に使用するタイム ゾーンを入力します。
|
||||
[モビリティIDモバイルコネクトの有効化(Mobility Identity Enable Mobile Connect)] |
このフィールドに「T」または「F」を入力すると、コールの着信時にデスク電話とリモート接続先で同時に呼び出し音を鳴らしたり、鳴らさないようにしたりすることができます。 |
||||
[モバイルスマートクライアントプロファイル(Mobile Smart Client Profile)] |
モバイル スマート クライアント プロファイルは、スマート クライアント デバイスとデュアルモード フォンのスマート クライアントです。 このフィールドに「Standard Cisco Unified Mobile Communicator Profile」と入力して、Cisco Unified Mobile Communicator を有効にします。 ブランクにすると、無効になります。 |
||||
[位置情報(Geo Location)] |
電話機に関連付ける位置情報を入力します。 電話機を位置情報に関連付けない場合は、「unspecified」と入力します。 |
||||
[機能管理ポリシー(Feature Control Policy)] |
このグループの電話機の機能管理ポリシーを入力します。 機能管理ポリシーは、機能のアピアランスおよび電話機に表示される関連付けられたソフトキーを指定します。 |
||||
[回線フィールド(Line Fields)](オプション) |
|||||
[電話番号(Directory Number)] |
電話機の電話番号を、24 桁以下の数字と特殊文字で入力します。 |
||||
[ルートパーティション(Route Partition)] |
電話番号が属するルート パーティションを入力します。
|
||||
[表示(Display)] |
コールの着信側の電話機ディスプレイに表示するテキストを入力します(たとえば、John Smith などのユーザ名や Conference Room 1 などの電話機の設置場所など)。
|
||||
[回線のテキストラベル(Line Text Label)] |
回線と電話機の組み合わせに使用されているこの電話番号を識別するためのテキストを入力します。
|
||||
[ボイスメールプロファイル(Voice Mail Profile)] |
パイロット番号をこの回線の電話番号と同じにするには、このパラメータを入力します。 この機能は、この電話機に対してボイスメッセージ サーバが設定されていない場合に役立ちます。 |
||||
[回線コーリングサーチスペース(Line Calling Search Space)] |
この電話番号から呼び出される番号を検索するパーティションを入力します。
|
||||
[AARグループ(AAR Group)] |
このデバイスの自動代替ルーティング(AAR)グループを入力します。 AAR グループは、帯域幅不足のためにコールがブロックされないように、コールをルーティングするためのプレフィックス番号を提供します。 AAR グループを [<なし(None)>] に設定すると、ブロックされたコールの再ルーティングは行われません。 |
||||
[不在転送CSS(Forward All CSS)] |
コールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを入力します。
|
||||
[不在転送のセカンダリCSS(Secondary CSS for Forward All)] |
セカンダリ コーリング サーチ スペース(CSS)を入力します。 |
||||
[不在転送の接続先(Forward All Destination)] |
すべてのコールが自動転送される先の電話番号またはディレクトリ URI を入力します。
|
||||
[話中転送CSS(外部)(Forward Busy External CSS)] |
外部番号からのコールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを入力します。
|
||||
[話中転送CSS(内部)(Forward Busy Internal CSS)] |
内部番号からのコールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを入力します。
|
||||
[話中転送の接続先(外部)(Forward Busy Destination External)] |
回線が使用中のときに外部番号からのコールが自動転送される先の電話番号またはディレクトリ URI を入力します。
|
||||
[話中転送の接続先(内部)(Forward Busy Destination Internal)] |
回線が使用中のときに内部番号からのコールが自動転送される先の電話番号またはディレクトリ URI を入力します。
|
||||
[無応答時転送CSS(外部)(Forward No Answer External CSS)] |
外部番号からのコールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを入力します。 この設定値は、システム内で設定されている場合だけ、表示されます。
|
||||
[無応答時転送CSS(内部)(Forward No Answer Internal CSS)] |
内部番号からのコールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを入力します。 この設定値は、システム内で設定されている場合だけ、表示されます。
|
||||
[無応答時転送の接続先(外部)(Forward No Answer External Destination)] |
電話機が応答しない場合に外部番号からのコールが自動転送される先の電話番号またはディレクトリ URI を入力します。
|
||||
[無応答時転送の接続先(内部)(Forward No Answer Internal Destination)] |
電話機が応答しない場合に内部番号からのコールが自動転送される先の電話番号またはディレクトリ URI を入力します。
|
||||
[カバレッジなし時転送CSS(外部)(Forward No Coverage External CSS)] |
外部番号からのコールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを入力します。 この設定値は、システム内で設定されている場合だけ、表示されます。
|
||||
[カバレッジなし時転送CSS(内部)(Forward No Coverage Internal CSS)] |
内部番号からのコールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを入力します。 この設定値は、システム内で設定されている場合だけ、表示されます。
|
||||
[カバレッジなし時転送の接続先(外部)(Forward No Coverage External Destination)] |
電話機のカバレッジが対応しない場合に外部番号からのコールが自動転送される先の電話番号またはディレクトリ URI を入力します。
|
||||
[カバレッジなし時転送の接続先(内部)(Forward No Coverage Internal Destination)] |
電話機のカバレッジが対応しない場合に内部番号からのコールが自動転送される先の電話番号またはディレクトリ URI を入力します。
|
||||
[障害時転送のコーリングサーチスペース(外部/内部)(Calling Search Space Forward on Failure External/Internal)] |
(CTI ポートのみ)内線コールまたは外線コールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを入力します。 この設定値は、システム内で設定されている場合だけ、表示されます。
|
||||
[障害時転送の接続先(外部/内部)(Forward on Failure Destination External/Internal)] |
(CTI ポートのみ)電話機または CTI アプリケーションに障害が起きたときに、内部番号または外部番号からのコールが自動転送される先の電話番号またはディレクトリ URI を入力します。 |
||||
[CTI障害時転送の接続先(Forward on CTI Failure Destination)] |
この設定は、電話番号を制御するアプリケーションが失敗した場合に、接続されなかった内線コールが自動転送される電話番号を指定します。 外部の電話番号を含め、ダイヤル可能な任意の電話番号を使用します。 内線コールの宛先の値を入力すると、外線コールの [接続先(Destination)] フィールドにこの値が自動的にコピーされます。 外線コールを別の宛先に自動転送する場合は、外線コールの [接続先(Destination)] フィールドに別の値を入力する必要があります。 |
||||
[CTI障害時転送のコーリングサーチスペース(Forward on CTI Failure Calling Search Space)] |
この設定値は、この電話番号を使用するすべてのデバイスに適用されます。 内線コールの CSS を選択すると、外線コールの CSS 設定にこの値が自動的にコピーされます。 外線コールを別のコーリング サーチ スペースに自動転送する場合は、外線コールの CSS に別の設定値を選択する必要があります。 |
||||
[コールピックアップグループ(Call Pickup Group)] |
コール ピックアップ グループ名を選択してコール ピックアップ グループを指定します。コール ピックアップ グループでは、該当のピックアップ グループ番号をダイヤルすることにより、この電話番号への着信コールに応答することができます。 |
||||
[外線電話番号マスク(External Phone Number Mask)] |
この回線からコールを行うときに発信者 ID 用に送信される電話番号(またはマスク)を入力します。 最大 24 桁の数字と文字「X」を入力できます。 X は電話番号を表し、パターンの最後に配置する必要があります。 たとえば、972813XXXX というマスクを指定すると、内線 1234 からの外線コールには発信者 ID 番号 9728131234 が表示されます。 |
||||
[無応答時転送の呼び出し時間(CFNA)(Forward No Answer Ring Duration (CFNA))] |
コールが呼び出し音を送り、応答を待つ時間(秒数)を入力します。この時間内に応答がないと、無応答時の転送着信先にコールを自動転送します。 |
||||
[転送の接続先(MLPP)(Target Destination (MLPP))] |
この電話番号が優先コールを受信したが、その番号もその自動転送先もその優先コールに応答しない場合に、MLPP 優先コールが向けられる先の番号を入力します。 この値には、数字、シャープ(#)、およびアスタリスク(*)を含めることができます。 |
||||
[コーリングサーチスペース(MLPP)(Calling Search Space (MLPP))] |
代替パーティ ターゲット(宛先)番号に関連付けるコーリング サーチ スペースを入力します。 |
||||
[無応答時の呼び出し時間(MLPP)(No Answer Ring Duration (MLPP))] |
優先コールに対してこの電話番号とその自動転送先が応答するのを待つ時間(4 ~ 30 秒)を入力します。この時間内に応答がないと、MLPP 優先コールはこの電話番号の代替パーティに向けて送られます。 Cisco Unified Communications Manager エンタープライズ パラメータの Precedence Alternate Party Timeout で設定されている値を使用する場合は、この設定をブランクのままにします。 |
||||
[コール最大数(Maximum Number of Calls)] |
クラスタ内のデバイスの 1 つの回線に対して最大 200 のコールを設定できます。ただし、デバイスが制限要因となります。 1 つの回線に対してコールの数を設定すると、別の回線に使用可能なコールが減少します。 デフォルトは 4 です。 電話機が回線ごとの複数コールを許可していない場合、デフォルトは 2 です。 CTI ルート ポイントに対しては、各ポートに対して最大 10,000 のコールを設定できます。 デフォルトは 5000 コールです。 このフィールドは [ビジートリガー(Busy Trigger)] フィールドと併せて使用します。 |
||||
[ビジートリガー(Busy Trigger)] |
この設定は、[コール最大数(Maximum Number of Calls)] および [話中転送(Call Forward Busy)] と連動し、回線で表示されるコールの最大数を決定します。 [コール最大数(Maximum Number of Calls)] が 50 に設定され、[ビジートリガー(Busy Trigger)] が 40 に設定されている場合、着信コール 41 は話し中を理由として拒否されます(さらに [話中転送(Call Forward Busy)] が設定されている場合は転送されます)。 この回線が共有されている場合は、すべての回線が話し中になって、初めて着信コールが拒否されることに注意してください。 このフィールドは、CTI ルート ポイント用の [コール最大数(Maximum Number of Calls)] と併せて使用します。 デフォルトは 4500 コールです。 |
||||
[呼び出し表示(Alerting Name)] |
共有電話番号に対するアラート中に表示される名前を表します。 非共有電話番号の場合、アラート時には [表示(Display)] フィールドに入力された名前が使用されます。 |
||||
[ASCII呼び出し表示(Alerting Name ASCII)] |
このフィールドには、[呼び出し表示(Alerting Name)] フィールドと同じ情報を指定します。ただし、入力は ASCII 文字に制限されます。 Unicode(国際化)文字をサポートしないデバイスでは、[ASCII呼び出し表示(Alerting Name ASCII)] フィールドの内容が表示されます。 |
||||
[自動応答(Auto Answer)] |
次のいずれかのオプションを入力して、この電話番号の自動応答機能をアクティブにします。
共有回線を持つデバイスに自動応答を設定しないでください。 |
||||
[ルートフィルタ(Route Filter)] |
[ルートフィルタ名(Route Filter Name)] フィールドに名前を入力します。 この名前には、最長 50 文字の英数字を指定でき、スペース、ピリオド(.)、ハイフン(-)、および下線文字(_)を任意に組み合わせることが可能です。 各フィルタ名がルート プランで一意であることを確認します。
|
||||
[ダイヤルプラン(Dial Plan)] |
たとえば、北米番号計画などのダイヤル プランを入力します。 |
||||
[回線ユーザ保留MOH音源(Line User Hold MOH Audio Source)] |
ユーザが電話を保留にしたときの保留音(MOH)のために使用するオーディオ ソースを入力します。 |
||||
[回線ネットワーク保留MOH音源(Line Network Hold MOH Audio Source)] |
ネットワークが電話を保留にしたときの保留音(MOH)のために使用するオーディオ ソースを入力します。 |
||||
[呼出音設定(電話がアクティブのとき)(Ring Setting (Phone Active))] |
この電話機に異なる回線で別のアクティブ コールがあった場合に使用される呼び出し音設定を入力します。 次のいずれかのオプションを選択します。 |
||||
[呼出音設定(電話がアイドルのとき)(Ring Setting (Phone Idle))] |
着信コールを受信し、デバイスに他のアクティブなコールがない場合の、ライン アピアランスに対する呼び出し音設定を入力します。 次のいずれかのオプションを選択します。 |
||||
[E.164] |
ゲートキーパーに登録されている E.164 アドレスを入力します。
|
||||
[AAR接続先マスク(AAR Destination Mask)] |
外部電話番号マスクではなく、使用する設定を入力して、ダイヤルする AAR 接続先を判定します。 |
||||
[未登録内線の不在転送接続先(Forward Unregistered Internal Destination)] |
回線が使用中のときに未登録の内線コールが自動転送される先の電話番号を入力します。 この設定値は、ダイヤル可能な任意の内部電話番号、およびこの電話番号を使用するすべてのデバイスに適用されます。 |
||||
[未登録内線の不在転送CSS(Forward Unregistered Internal CSS)] |
未登録の内線コールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを入力します。 この設定値は、この電話番号を使用するすべてのデバイスに適用されます。 |
||||
[未登録外線の不在転送接続先(Forward Unregistered External Destination)] |
回線が使用中のときに外線コールが自動転送される先の電話番号を入力します。 この設定値は、ダイヤル可能な任意の外部電話番号(制限されていない限り、外部の宛先を含む)、およびこの電話番号を使用するすべてのデバイスに適用されます。 |
||||
[未登録外線の不在転送CSS(Forward Unregistered External CSS)] |
外線コールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを入力します。 この設定値は、この電話番号を使用するすべてのデバイスに適用されます。 |
||||
[オーディオメッセージ受信インジケータのポリシー(Audible Message Waiting Indicator Policy)] |
このフィールドを使用して、オーディオ メッセージ受信インジケータのポリシーを設定します。 次のオプションのいずれかを入力します。 |
||||
[コールピックアップグループオーディオアラートの設定(電話がアイドルのとき)(Call Pickup Group Audio Alert Setting (Phone Idle))] |
このフィールドで、着信コールがコール ピックアップ グループのメンバーに送信する通知のタイプが判定されます。 コールが着信した電話機で応答されない場合、コール ピックアップ グループ内のアイドルの電話機で短い呼び出し音が聞こえるか([一度鳴らす(ring once)])、または何も聞こえません([無効(disabled)])。 |
||||
[コールピックアップグループオーディオアラートの設定(電話がアクティブのとき)(Call Pickup Group Audio Alert Setting (Phone Active))] |
このフィールドで、着信コールがコール ピックアップ グループのメンバーに送信する通知のタイプが判定されます。 コールが着信した電話機で応答されない場合、コール ピックアップ グループ内で使用中の電話機でビープ音が聞こえるか、または何も聞こえません(無効)。 |
||||
[コール録音オプション(Call Recording Option)] |
このフィールドで、エージェントのライン アピアランスでの録音オプションが決定されます。 デフォルトでは、録音オプションは [コール録音を無効(Call Recording Disabled)] です。 次のオプションのいずれかを入力します。
録音オプションが [自動コール録音を有効(Automatic Call Recording Enabled)] または [アプリケーションから呼び出されたコール録音を有効(Application Invoked Call Recording Enabled)] のいずれかに設定されている場合、ライン アピアランスを録音プロファイルに関連付けることができます。 自動録音が有効な場合、アプリケーションからの録音要求は拒否されます。 |
||||
[録音プロファイル(Recording Profile)] |
このフィールドで、エージェントのライン アピアランスでの録音プロファイルが決定されます。 |
||||
[モニタリング用コーリングサーチスペース(Monitoring Calling Search Space)] |
スーパーバイザのライン アピアランスのモニタリング用コーリング サーチ スペースに、エージェントの回線またはデバイス パーティションを含めてエージェントをモニタできるようにします。 スーパーバイザのライン アピアランス ウィンドウでモニタリング用コーリング サーチ スペースを入力します。 デフォルト値は [なし(None)] です。 |
||||
[不在転送CSSアクティベーションポリシー(Forward All CSS Activation Policy)] |
次のオプションのいずれかを入力します。 |
||||
[パーティ参加トーン(Party Entrance Tone)] |
次のいずれかのパーティ参加トーン オプションを入力します。
|
||||
[パークモニタリング転送非取得時の接続先(外部)(Park Monitor Forward No Retrieve Ext Destination)] |
パークされている側が外部の場合、パークしたユーザの [パークモニタリング転送非取得時の接続先(外部)(Park Monitoring Forward No Retrieve Destination External)] パラメータに指定された接続先にコールが転送されます。 [転送非取得時の接続先(外部)(Forward No Retrieve Destination External)] フィールドの値が空の場合、パークされた側のコールはパークしたユーザの回線にリダイレクトされます。 |
||||
[パークモニタリング転送非取得時の接続先(内部)(Park Monitor Forward No Retrieve Int Destination)] |
パークされている側が内部の場合、パークしたユーザの [パークモニタリング転送非取得時の接続先(内部)(Park Monitoring Forward No Retrieve Destination Internal)] パラメータに指定された接続先にコールが転送されます。 [転送非取得時の接続先(内部)(Forward No Retrieve Destination Internal)] フィールドの値が空の場合、パークされた側のコールはパークしたユーザの回線にリダイレクトされます。 |
||||
[未取得時のパークモニタリング転送:内線ボイスメール(Park Monitor Forward No Retrieve Int Voice Mail)] |
この設定では、[ボイスメールプロファイルの設定(Voice Mail Profile Configuration)] ウィンドウの設定が使用されます。 この設定では、 Cisco Unified Communications Manager は、[接続先(Destination)] ボックスと [コーリングサーチスペース(Calling Search Space)] の設定値を無視します。 |
||||
[未取得時のパークモニタリング転送:外部ボイスメール(Park Monitor Forward No Retrieve Ext Voice Mail)] |
この設定では、[ボイスメールプロファイルの設定(Voice Mail Profile Configuration)] ウィンドウの設定が使用されます。 この設定では、 Cisco Unified Communications Manager は、[接続先(Destination)] ボックスと [コーリングサーチスペース(Calling Search Space)] の設定値を無視します。 |
||||
[パークモニタリング転送非取得時のCSS(外部)(Park Monitor Forward No Retrieve Ext CSS)] |
電話番号に適用するコーリング サーチ スペースを選択します。 |
||||
[パークモニタリング転送非取得時のCSS(内部)(Park Monitor Forward No Retrieve Int CSS)] |
電話番号に適用するコーリング サーチ スペースを選択します。 |
||||
[パークモニタリング復帰タイマー(Park Monitor Reversion Timer)] |
このパラメータは、ユーザがパークしたコールを取得するようにユーザに求めるまで、 Cisco Unified Communications Manager が待機する秒数を決定します。 このタイマーはユーザが電話の [パーク] ソフトキーを押すと起動し、タイマーの期限が切れるとリマインダが発行されます。 デフォルト:60 秒 ゼロ以外の値を設定すると、[サービスパラメータ(Service Parameters)] ウィンドウに設定されているパラメータの値がこの値で上書きされます。 一方、ここに 0 を設定すると、[サービスパラメータ(Service Parameters)] ウィンドウの値が使用されます。 |
||||
[不在着信のログを取る(Log Missed Calls)] |
このフィールドを使用すると、不在着信のログ機能をオンまたはオフにできます。 「T」を入力すると、 Cisco Unified Communications Manager は電話機でのその電話番号に対する通話履歴に不在着信のログを記録します。 この機能を無効にするには「F」を入力します。 |
||||
[電話番号のURI(1-5)(URI (1-5) on Directory Number)] |
この電話機の電話番号に関連付けるディレクトリ URI を入力します。 「username@host」形式で入力してください。 最大で 47 文字の英数字によるユーザ名を入力します。 ホスト アドレスとして、IPv4 アドレスまたは完全修飾ドメイン名を入力します。 1 つの電話番号に最大 5 つのディレクトリ URI を関連付けることができます。
|
||||
[電話番号のURI(1-5)ルートパーティション(URI (1-5) Route Partition on Directory Number)] |
ディレクトリ URI が属するパーティションを入力します。 ディレクトリ URI へのアクセスを制限しない場合は、フィールドを空白のままにします。 |
||||
[電話番号ではURI(1-5)がプライマリ(URI (1-5) Is Primary on Directory Number)] |
このディレクトリ URI がこの内線のプライマリ ディレクトリ URI であることを示すには、「t」(True)と入力します。 逆に、このディレクトリ URI がこの内線のプライマリ ディレクトリ URI ではないことを示すには、「f」(False)と入力します。
|
||||
[エンタープライズのローカルルートパーティションへの追加(Enterprise Add to Local Route Partition)] |
このエンタープライズ代替番号をローカル ルート パーティションに追加するには、「t」と入力します。 ローカル ルーティングから E.164 番号を除外するには、「f」と入力します。 |
||||
[エンタープライズのグローバルでのアドバタイズ(Enterprise Advertise via globally)] |
ILS でこの代替番号を残りの ILS ネットワークにアドバタイズできるようにするには、「t」と入力します。 ILS でこの番号をアドバタイズしない場合は、「f」と入力します。 |
||||
[エンタープライズは緊急(Enterprise Is Urgent)] |
代替番号のルーティングを緊急と分類するには、「t」と入力します。 デフォルトでは、ダイヤル プランに重複したルート パターンが含まれる場合、桁間タイマーの期限が切れるまで、(ダイヤルされた番号について可能性のあるルートが存在する場合でも)Cisco Unified Communications Manager はコールをルーティングしません。 この設定では、Cisco Unified Communications Manager がダイヤル文字列について利用可能なすべてのルートから最適な一致を選択できるようにすることにより、静的に設定された電話番号および番号パターンと重複した学習番号を防止します。 緊急優先として番号をマークすると、Cisco Unified Communications Manager は桁間タイマーの期限が切れるまで待機することなく(たとえば、T302 タイマー サービス パラメータ)、ダイヤルされた番号と利用可能なルートの間で一致を見つけるとすぐにコールをルーティングします。 |
||||
[エンタープライズ番号マスク(Enterprise Number Mask)] |
電話番号に適用する番号マスクを入力します。 Cisco Unified Communications Manager はマスクを適用して、この電話番号のエイリアスであるエンタープライズ代替番号を作成します。 |
||||
[エンタープライズルートパーティション(Enterprise Route Partition)] |
このエンタープライズ代替番号を割り当てるローカル ルート パーティションを入力します。 |
||||
[+E.164のローカルルートパーティションへの追加(+E.164 Add to Local Route Partition)] |
この E.164 代替番号をローカル ルート パーティションに追加するには、「t」と入力します。 ローカル ルーティングから E.164 番号を除外するには、「f」と入力します。 |
||||
[+E.164のグローバルでのアドバタイズ(+E.164 Advertise via globally)] |
ILS でこの代替番号を残りの ILS ネットワークにアドバタイズできるようにするには、「t」と入力します。 ILS でこの番号をアドバタイズしない場合は、「f」と入力します。 |
||||
[+E.164 は緊急(+E.164 Is Urgent)] |
代替番号のルーティングを緊急と分類するには、「t」と入力します。 デフォルトでは、ダイヤル プランに重複したルート パターンが含まれる場合、桁間タイマーの期限が切れるまで、(ダイヤルされた番号について可能性のあるルートが存在する場合でも)Cisco Unified Communications Manager はコールをルーティングしません。 この設定では、Cisco Unified Communications Manager がダイヤル文字列について利用可能なすべてのルートから最適な一致を選択できるようにすることにより、静的に設定された電話番号および番号パターンと重複した学習番号を防止します。 緊急優先として番号をマークすると、Cisco Unified Communications Manager は桁間タイマーの期限が切れるまで待機することなく(たとえば、T302 タイマー サービス パラメータ)、ダイヤルされた番号と利用可能なルートの間で一致を見つけるとすぐにコールをルーティングします。 |
||||
[+E.164番号マスク(+E.164 Number Mask)] |
電話番号に適用する番号マスクを入力します。 Cisco Unified Communications Manager はマスクを適用して、この電話番号のエイリアスである +E.164 代替番号を作成します。 |
||||
[+E.164ルートパーティション(+E.164 Route Partition)] |
この +E.164 代替番号を割り当てるローカル ルート パーティションを入力します。 |
||||
[インターコムフィールド(Intercom Fields)](オプション) |
|||||
[インターコム電話番号(Intercom Directory Number)] |
ダイヤル可能な電話番号を入力します。 値は、(.)と(@)を除いた特殊文字、数字、およびルート パターン ワイルドカードを含めることができます。 入力した電話番号は複数のパーティションに現れる可能性があります。 国際的なエスケープ文字 + を使用する場合、電話番号の先頭に「\+」と入力します。 このフィールドの場合、\+ はワイルドカードではありません。\+ はダイヤルされた番号のことです。 |
||||
[インターコムルートパーティション(Intercom Route Partition)] |
電話番号が属するパーティションを入力します。 [インターコム電話番号(Intercom Directory Number)] フィールドに入力する電話番号が、選択したパーティション内で固有のものであることを確認してください。
|
||||
[説明(Description)] |
電話番号およびルート パーティションの説明を入力します。 |
||||
[呼び出し表示(Alerting Name)] |
発信者の電話機で表示する名前を入力します。 この設定は QSIG プロトコルの識別サービスをサポートしていて、共有電話番号および非共有電話番号に適用されます。 |
||||
[ASCII呼び出し表示(Alerting Name ASCII)] |
このフィールドには、[呼び出し表示(Alerting Name)] フィールドと同じ情報を指定します。ただし、入力は ASCII 文字に制限されます。 Unicode(国際化)文字をサポートしないデバイスでは、[ASCII呼び出し表示(Alerting Name ASCII)] フィールドの内容が表示されます。 |
||||
[インターコム電話番号の設定(Intercom Directory Number Settings)] |
|||||
[コーリングサーチスペース(Calling Search Space)] |
適切なコーリング サーチ スペースを入力します。 コーリング サーチ スペースは、この電話番号からコールが行われる番号を検索するパーティションの集合から構成されています。 選択した値は、この電話番号を使用するすべてのデバイスに適用されます。 |
||||
[インターコムプレゼンスグループ(Intercom Presence Group)] |
この電話番号のプレゼンス グループを入力します。 選択されたグループでは、この電話番号をモニタできるデバイス、エンド ユーザ、およびアプリケーション ユーザが指定されます。 |
||||
[インターコム表示(Intercom Display)] |
このフィールドをブランクにすると、内線番号が表示されます。 最大 30 文字の英数字を使用します。 通常は、ユーザ名または電話番号を使用します(電話番号を使用した場合、コールの受信者に発信者の正確な識別情報が表示されません)。 |
||||
[インターコムASCII表示(Intercom ASCII Display)] |
このフィールドには、[表示(内線発信者ID)(Display (Internal Caller ID))] フィールドと同じ情報を指定します。ただし、入力は ASCII 文字に制限されます。 Unicode(国際化)文字をサポートしないデバイスでは、[ASCII表示(内線発信者ID)(ASCII Display (Internal Caller ID))] フィールドの内容が表示されます。 |
||||
[インターコム回線のテキストラベル(Intercom Line Text Label)] |
このフィールドは、ライン アピアランスにインターコム電話番号を表示しない場合だけ使用します。 回線と電話機の組み合わせに使用されているこの電話番号を識別するためのテキストを入力します。 |
||||
[インターコムスピードダイヤル(Intercom Speed Dial)] |
ユーザがスピード ダイヤル ボタンを押したときにシステムによってダイヤルされる番号を入力します。 0 ~ 9 の数字、*、#、および +(国際的なエスケープ文字)を入力することができます。 |
||||
[インターコム外線電話番号マスク(Intercom External Phone Number Mask)] |
この回線からコールを行うときに発信者 ID 用に送信するために使用される電話番号(またはマスク)を入力します。 最大 24 桁の数字、国際的なエスケープ文字「+」、および文字「X」を入力できます。 X は電話番号を表し、パターンの最後に配置する必要があります。 たとえば、972813XXXX というマスクを指定すると、内線 1234 からの外線コールには発信者 ID 番号 9728131234 が表示されます。 |
||||
[インターコム発信者名(Intercom Caller Name)] |
「T」を入力すると、自動転送時に発信者の名前が表示されるようになります。 「F」を入力すると、表示されません。 |
||||
[インターコム発信者番号(Intercom Caller Number)] |
「T」を入力すると、自動転送時に発信者の番号が表示されるようになります。 「F」を入力すると、表示されません。 |
||||
[インターコムコール録音オプション(Intercom Call Recording Option)] |
次のオプションのいずれかを入力します。 |
||||
[インターコム録音プロファイル(Intercom Recording Profile)] |
エージェントのライン アピアランスでの録音プロファイルを入力します。 |
||||
[インターコムモニタリング用コーリングサーチスペース(Intercom Monitoring Calling Search Space)] |
スーパーバイザのライン アピアランスのモニタリング用コーリング サーチ スペースに、エージェントの回線またはデバイス パーティションを含めてエージェントをモニタできるようにします。 既存のコーリング サーチ スペースを入力します。 デフォルト値は [なし(None)] です。 |
||||
[自動応答(Auto Answer)] |
次のいずれかのオプションを入力して、この電話番号の自動応答機能をアクティブにします。
|
目次
- 電話テンプレート
- データベースへの電話機の追加
- BAT 電話テンプレート
- BAT 電話テンプレートの検索
- 新しい BAT 電話テンプレートの作成
- BAT テンプレートにおける電話回線の追加または更新
- BAT テンプレートにおける IP サービスの追加または更新
- BAT テンプレートにおけるスピード ダイヤルの追加または更新
- BAT テンプレートにおけるビジー ランプ フィールドの追加または更新
- BAT テンプレートにおけるビジー ランプ フィールド ダイレクト コール パークの追加または更新
- BAT テンプレートにおけるインターコム テンプレートの追加または更新
- BAT 電話テンプレートの変更
- BAT 電話テンプレートのコピー
- BAT 電話テンプレートの削除
- BAT 電話テンプレートのフィールドの説明
- BAT テンプレートの電話回線フィールドの説明
- インターコム テンプレートを追加するための BAT テンプレートのフィールドの説明
- BAT スプレッドシートを使用した電話機 CSV データ ファイルの作成
- BAT スプレッドシートの電話機フィールドの説明
Cisco Unified Communications Manager 一括管理(BAT)は、多数の電話機を一括して追加、更新、または削除する高速で効率的な方法を管理者に提供します。 Cisco Unified Communications Manager の管理ページを通じて個々に更新を行う必要はありません。 BAT を使用して次のタイプの電話機を処理することができます。
この章では、BAT を使用して電話テンプレートと他の IP テレフォニー デバイスに関する作業を行う方法について説明します。
データベースへの電話機の追加
手順BAT を使用して、電話機と他の IP テレフォニー デバイスを一括して Cisco Unified Communications Manager データベースに追加する場合は、各電話機に複数の回線、サービス、およびスピード ダイヤルを追加することができます。 CTI ポートと H.323 クライアントを追加することもできます。
ステップ 1 の順に選択します。 [電話テンプレートの検索/一覧表示(Find and List Phone Templates)] ウィンドウが表示されます。
ステップ 2 電話テンプレートを挿入するための CSV データ ファイルを作成します。 次のいずれかの選択肢を実行します。
ステップ 3 の順に選択します。 [電話の確認(Validate Phones)] ウィンドウが表示されます。
ステップ 4 Cisco Unified Communications Manager データベースに挿入します。 の順に選択して、電話機レコードを [電話の挿入(Insert Phones)] ウィンドウが表示されます。
関連タスク
BAT 電話テンプレート
BAT 電話テンプレートを使用して、一連の新しい電話機を追加するために共通の電話機属性を定義します。 テンプレートの作成前に、電話機設定値(たとえば、デバイス プール、ロケーション、コーリング サーチ スペース、ボタン テンプレート、ソフトキー テンプレート)が、 Cisco Unified Communications Manager の管理ページに設定されていることを確認してください。 BAT で新しい設定値を作成することはできません。
- BAT 電話テンプレートの検索
- 新しい BAT 電話テンプレートの作成
- BAT 電話テンプレートの変更
- BAT 電話テンプレートのコピー
- BAT 電話テンプレートの削除
- BAT 電話テンプレートのフィールドの説明
- BAT テンプレートの電話回線フィールドの説明
- インターコム テンプレートを追加するための BAT テンプレートのフィールドの説明
- BAT スプレッドシートを使用した電話機 CSV データ ファイルの作成
- BAT スプレッドシートの電話機フィールドの説明
BAT 電話テンプレートの検索
手順複数の電話テンプレートに対応できるように、 Cisco Unified Communications Manager では、ユーザが定義する検索条件に基づいて特定の電話テンプレートを検出できます。
(注)
ブラウザ セッションの作業中、検索/一覧表示の検索プリファレンスはクライアント マシンのクッキーに格納されます。 別のメニュー項目に移動してからこのメニュー項目に戻った場合、またはブラウザを閉じてから新しいブラウザ ウィンドウを再度開いた場合、検索を変更するまで Cisco Unified Communications Manager 検索プリファレンスが維持されます。
ステップ 1 の順に選択します。 [電話テンプレートの検索/一覧表示(Find and List Phone Templates)] ウィンドウが表示されます。 2 つのドロップダウン リスト ボックスを使用して、テンプレートを検索します。
ステップ 2 最初の [検索対象:電話テンプレート、検索条件:(Find Phone Templates where)] ドロップダウン リスト ボックスで、次のいずれかの検索条件を選択します。
- [デバイス名(Device Name)]
- [説明(Description)]
- [電話番号(Directory Number)]
- [ディレクトリURI(Directory URI)]
- [コーリングサーチスペース(Calling Search Space)]
- [デバイスプール(Device Pool)]
- [デバイスタイプ(Device Type)]
- [コールピックアップグループ(Call Pickup Group)]
- [LSCステータス(LSC Status)]
- [認証文字列(Authentication String)]
- [デバイスプロトコル(Device Protocol)]
- [セキュリティプロファイル(Security Profile)]
- [共通デバイス設定(Common Device Configuration)]
ステップ 3 2 番目の [検索対象:電話テンプレート、検索条件:(Find Phone Template where)] ドロップダウン リスト ボックスで、次のいずれかの条件を選択します。 ステップ 4 必要に応じて、適切な検索テキストを指定し、[検索(Find)] をクリックします。 検索されたテンプレートのリストが表示されます。
ヒント データベースに登録されているすべての電話テンプレートを検索するには、検索テキストを入力せずに [検索(Find)] をクリックします。
ステップ 5 レコードのリストから、検索条件に一致するデバイス名をクリックします。 選択した電話テンプレートがウィンドウに表示されます。
新しい BAT 電話テンプレートの作成
手順
ステップ 1 の順に選択します。 [電話テンプレートの検索/一覧表示(Find and List Phone Templates)] ウィンドウが表示されます。
ステップ 2 [新規追加(Add New)] をクリックします。 [新規電話テンプレートを追加(Add a New Phone Template)] ウィンドウが表示されます。 ステップ 3 [電話のタイプ(Phone Type)] ドロップダウン リスト ボックスで、テンプレートを作成する対象の電話機のモデルを選択します。 [次へ(Next)] をクリックします。 ステップ 4 [デバイスプロトコルの選択(Select the Device Protocol)] ドロップダウン リスト ボックスで、デバイス プロトコルを選択します。 [次へ(Next)] をクリックします。 [電話テンプレートの設定(Phone Template Configuration)] ウィンドウに、選択したデバイス タイプに対応するフィールドとデフォルトのエントリが表示されます。
ステップ 5 [テンプレート名(Template Name)] フィールドに、テンプレートの名前を入力します。 名前には、50 文字以内の英数字を指定することができます。
例:Sales_7975ステップ 6 [デバイス情報(Device Information)] 領域に、このバッチに共通する電話機設定値を入力します。 詳細については、表 1を参照してください。 電話機モデルとデバイス タイプによっては、表に記載されている属性すべてを備えていないものがあります。 ステップ 7 この BAT 電話テンプレートの設定値をすべて入力した後、[保存(Save)] をクリックします。
トランザクションが完了したことがステータスに示されたら、回線属性を追加することができます。
BAT テンプレートにおける電話回線の追加または更新
手順BAT テンプレートに 1 つ以上の回線を追加したり、既存の回線を更新したりすることができます。 BAT テンプレートで使用しているボタン テンプレートにより、追加または更新できる回線の数が決まります。 複数の回線を持つマスター電話テンプレートを作成することができます。 さらに、マスター テンプレートを使用して、1 回線またはマスター テンプレートの回線数以下の複数回線を持つ電話機を追加することができます。 選択する設定値は、このバッチ内のすべての電話機またはユーザ デバイス プロファイルで使用されます。
回線テンプレートの値には、英数字を使用することをお勧めします。番号を指定すると、実際の電話番号と競合する可能性があるためです。 英数字を使用することで、コール ピックアップ グループ番号やコール パーク番号などの情報との競合も回避できます。
BAT テンプレート用に表示される最大回線数は、BAT 電話テンプレートの作成時に選択したモデルとボタン テンプレートによって決まります。 一部の Cisco Unified IP Phone モデルでは、Cisco Unified IP Phone サービスとスピード ダイヤルをテンプレートに追加することもできます。
ステップ 1 回線を追加する電話テンプレートを検索します。 ステップ 2 [電話テンプレートの設定(Phone Template Configuration)] ウィンドウの [割り当て情報(Association Information)] 領域で、[回線 [1] - 新規DNを追加(Line [1] - Add a new DN)] をクリックします。 [回線テンプレートの設定(Line Template Configuration)] ウィンドウが表示されます。 ステップ 3 回線設定値に対して適切な値を入力または選択します。 詳細については、表 1を参照してください。 すべてのフィールドは、オプションです。 ステップ 4 [保存(Save)] をクリックします。 ステップ 5 その他の回線の設定値を追加するには、ステップ 2 ~ステップ 4 を繰り返します。 [回線テンプレートの設定(Line Template Configuration)] ウィンドウの右上隅にある [関連リンク(Related Links)] ドロップダウン リスト ボックスから [検索/一覧表示に戻る(Back to Find/List)] を選択すると、[回線テンプレートの検索/一覧表示(Find and List Line Templates)] ウィンドウが表示されます。
関連資料
BAT テンプレートにおける IP サービスの追加または更新
手順各種の Cisco Unified IP Phone サービスを、この機能を備える Cisco Unified IP Phone モデルに、BAT テンプレートで直接登録できます。 ユーザまたは電話機を IP サービスにまとめて登録するには、IP サービスが共通のサービス パラメータを持ち、電話テンプレートによって登録されている必要があります。 固有のサービス パラメータを持つ IP サービスをまとめて登録することはできません。 固有のサービス パラメータを持つサービスの場合は、CSV ファイルを使用します。
ステップ 1 IP サービスを追加する電話テンプレートを検索します。 ステップ 2 [電話テンプレートの設定(Phone Template Configuration)] ウィンドウの [割り当て情報(Association Information)] 領域で、[新規SURLを追加(Add a new SURL)] をクリックします。 ポップアップ ウィンドウが表示されます。 このウィンドウで、利用可能な Cisco Unified IP Phone サービスを登録できます。 ステップ 3 [サービスの選択(Select a Service)] ドロップダウン リスト ボックスで、すべての電話機に登録するサービスを選択します。 [サービスの説明(Service Description)] ボックスに、選択したサービスの詳細が表示されます。 ステップ 4 [次へ(Next)] をクリックします。 ステップ 5 必要に応じて、[サービス名(Service Name)] フィールドでサービスの名前を変更します。 ステップ 6 選択したサービスを関連付けるか、他のサービスをテンプレートに追加します。 選択したテンプレートのサービスの追加または更新が完了したら、次のステップに進みます。 ステップ 7 ポップアップ ウィンドウを閉じます。
次の作業引き続き、選択したテンプレートにスピード ダイヤルを追加することができます。
BAT テンプレートにおけるスピード ダイヤルの追加または更新
手順電話機ボタン テンプレートでスピード ダイヤル ボタンが設定されている場合は、電話機および Cisco VGC Phone の BAT テンプレートでスピード ダイヤルを追加または更新することができます。 BAT テンプレートで使用している電話機ボタン テンプレートによって、使用可能なスピード ダイヤル ボタンの数が決まります。
ステップ 1 スピード ダイヤルを追加する電話テンプレートを検索します。 ステップ 2 [電話テンプレートの設定(Phone Template Configuration)] ウィンドウで、次のいずれかを実行します。 ポップアップ ウィンドウが表示されます。 このウィンドウで、Cisco Unified IP Phone および拡張モジュールに対して、スピード ダイヤル ボタンを指定できます。 ステップ 3 [スピードダイヤル設定(Speed Dial Settings)] 領域で、アクセス コードや長距離コードを含めて、電話番号を [番号(Number)] フィールドに入力します。
(注) 電話番号を入力する際、必要に応じて、電話番号の後に強制承認コード(FAC)またはクライアント識別コード(CMC)を入力できます。 電話番号、FAC、CMC は、続けて入力するか、カンマ(,)で区切って入力することができます。 スピード ダイヤルには、暗証番号、パスワード、およびその他の、コールが接続された後に DTMF ディジットとして送信される数字を含めることができます。 スピード デジタルによる接続中に一時停止が必要な場合は、1 つ以上のカンマ(,)を入力してください。各カンマは、2 秒間の一時停止を表します。 DTMF ディジットは、コールが接続された後に、カンマの数に対応する時間の一時停止を挟んで送信されます。 スピード ダイヤルの一時停止の詳細については、『Cisco Unified Communications Manager アドミニストレーション ガイド』を参照してください。
ステップ 4 [ラベル(Label)] フィールドに、スピード ダイヤル番号に対応するラベルを入力します。 ステップ 5 [短縮ダイヤル設定(Abbreviated Dial Settings)] 領域で、該当する IP Phone モデルに短縮ダイヤルを設定することができます。 ステップ 3 を繰り返します。 ステップ 6 [保存(Save)] をクリックします。 BAT によってテンプレートにスピード ダイヤル設定値が挿入され、ポップアップ ウィンドウが閉じます。
関連タスク
BAT テンプレートにおけるビジー ランプ フィールドの追加または更新
手順電話機ボタン テンプレートでスピード ダイヤル ボタンが設定されている場合は、電話機および Cisco VGC Phone の BAT テンプレートでビジー ランプ フィールド スピード ダイヤルを追加または更新することができます。 BAT テンプレートで使用している電話機ボタン テンプレートによって、使用可能な BLF SD ボタンの数が決まります。
ステップ 1 スピード ダイヤルを追加する電話テンプレートを検索します。 ステップ 2 [電話テンプレートの設定(Phone Template Configuration)] ウィンドウで、次のいずれかを実行します。 ポップアップ ウィンドウが表示されます。 このウィンドウで、Cisco Unified IP Phone および拡張モジュールに対して、ビジー ランプ フィールド スピード ダイヤル(BLF SD)ボタンを指定できます。 ステップ 3 [スピードダイヤル設定(Speed Dial Settings)] 領域で、アクセス コードや長距離コードを含めて、電話番号を [接続先(Destination)] フィールドに入力します。 ステップ 4 ドロップダウン リスト ボックスから電話番号を選択します。 [検索(Find)] をクリックすると、電話番号を検索できます。 ステップ 5 [ラベル(Label)] フィールドに、BLF SD 番号に対応するラベルを入力します。 ステップ 6 [保存(Save)] をクリックします。 BAT によってテンプレートに BLF SD 設定値が挿入され、ポップアップ ウィンドウが閉じます。
関連タスク
BAT テンプレートにおけるビジー ランプ フィールド ダイレクト コール パークの追加または更新
手順電話機ボタン テンプレートでスピード ダイヤル ボタンが設定されている場合は、電話機および Cisco VGC Phone の BAT テンプレートでビジー ランプ フィールド(BLF)ダイレクト コール パークを追加または更新することができます。 この BAT テンプレートで使用している電話機ボタン テンプレートによって、使用可能な BLF ダイレクト コール パーク ボタンの数が決まります。
ステップ 1 BLF スピード ダイレクト コール パークを追加する電話テンプレートを検索します。 ステップ 2 [電話テンプレートの設定(Phone Template Configuration)] ウィンドウで、次のいずれかを実行します。 ポップアップ ウィンドウが表示されます。 このウィンドウで、Cisco Unified IP Phone および拡張モジュールに対して、BLF ダイレクト コール パーク ボタンを指定できます。 ステップ 3 [割り当てられていないビジーランプフィールド/ダイレクトコールパークの設定(Unassigned Busy Lamp Field/Directed Call Park Settings)] 領域で、ドロップダウン リスト ボックスから電話番号を選択します。 [検索(Find)] をクリックすると、電話番号を検索できます。 ステップ 4 [ラベル(Label)] フィールドに、BLF ダイレクト コール パーク番号に対応するラベルを入力します。 ステップ 5 [保存(Save)] をクリックします。 BAT によってテンプレートに BLF ダイレクト コール パーク設定が挿入され、ポップアップ ウィンドウが閉じます。
関連タスク
BAT テンプレートにおけるインターコム テンプレートの追加または更新
手順BAT テンプレートに 1 つ以上のインターコム テンプレートを追加したり、BAT テンプレートの既存のインターコム テンプレートを更新したりすることができます。BAT テンプレートで使用しているボタン テンプレートにより、追加または更新できる回線の数が決まります。 複数の回線を持つマスター電話テンプレートを作成することができます。 さらに、マスター テンプレートを使用して、1 回線またはマスター テンプレートの回線数以下の複数回線を持つ電話機を追加することができます。 インターコム テンプレート用に選択する設定値は、このバッチ内のすべての電話機またはユーザ デバイス プロファイルで使用されます。
インターコム テンプレートには、英数字を使用することをお勧めします。番号を指定すると、実際の電話番号と競合する可能性があるためです。 英数字を使用することで、コール ピックアップ グループ番号やコール パーク番号などの情報との競合も回避できます。
BAT テンプレート用に表示される最大回線数は、BAT 電話テンプレートの作成時に選択したモデルとボタン テンプレートによって決まります。 一部の Cisco Unified IP Phone モデルでは、Cisco Unified IP Phone サービスとスピード ダイヤルをテンプレートに追加することもできます。
ステップ 1 インターコム テンプレートを追加する電話テンプレートを検索します。 ステップ 2 [電話テンプレートの設定(Phone Template Configuration)] ウィンドウの [割り当て情報(Association Information)] 領域で、[インターコム [1] - 新規インターコムの追加(Intercom [1] - Add a new Intercom)] をクリックします。 [インターコムテンプレートの設定(Intercom Template Configuration)] ウィンドウが表示されます。 ステップ 3 インターコム テンプレート設定値に対して、適切な値を入力または選択します。 詳細については、表 1を参照してください。 ステップ 4 [保存(Save)] をクリックします。 BAT によって、インターコム テンプレートが電話テンプレート設定に追加されます。 ステップ 5 その他のインターコム テンプレートの設定値を追加するには、ステップ 2 ~ステップ 4 を繰り返します。 [インターコムテンプレートの設定(Intercom Template Configuration)] ウィンドウの右上隅にある [関連リンク(Related Links)] ドロップダウン リスト ボックスから [検索/一覧表示に戻る(Back to Find/List)] を選択すると、[インターコム電話番号の検索/一覧表示(Find and List Intercom Directory Numbers)] ウィンドウが表示されます。
(注) [インターコムテンプレートの設定(Intercom Template Configuration)] ウィンドウの右上隅にある [関連リンク(Related Links)] ドロップダウン リスト ボックスから [検索/一覧表示に戻る(Back to Find/List)] を選択すると、[インターコム電話番号の検索/一覧表示(Find and List Intercom Directory Numbers)] ウィンドウが表示されます。
関連タスク
関連資料
BAT 電話テンプレートの変更
手順
ステップ 1 変更する電話テンプレートを検索します。 ステップ 2 [電話テンプレートの設定(Phone Template Configuration)] ウィンドウで、テンプレートの設定値を追加、変更、または削除します。 詳細については、表 1を参照してください。 ステップ 3 設定値を変更した後、[保存(Save)] をクリックしてテンプレートを更新します。
次の作業BAT テンプレートの回線、IP サービス、またはスピード ダイヤルを追加または更新することができます。
BAT 電話テンプレートのコピー
手順変更するフィールドの数が少ない場合は、既存の電話テンプレートのプロパティを新しい電話テンプレートにコピーできます。 このコピーには、元のテンプレートで指定した値がすべて複写されます。
(注)
作成する新しいテンプレートは、元のテンプレートとデバイス タイプが同じでなければなりません(たとえば、Cisco IP Phone 7975)。
ステップ 1 コピーする電話テンプレートを検索します。 ステップ 2 電話テンプレートをコピーします。 次のいずれかを実行します。
- [電話テンプレートの設定(Phone Template Configuration)] ウィンドウで、コピーするテンプレートを確認し、[コピー(Copy)] をクリックします。
- [電話テンプレートの検索/一覧表示(Find and List Phone Templates)] ウィンドウで、コピーする電話テンプレートに対応した [コピー(Copy)] カラムのアイコンをクリックします。
- テンプレートとそのテンプレートに関連付けられているすべての回線をコピーするには、[電話テンプレートの検索/一覧表示(Find and List Phone Templates)] ウィンドウで、コピーする電話テンプレートと回線に対応した [スーパーコピー(Super Copy)] カラムのアイコンをクリックします。
ステップ 3 [テンプレート名(Template Name)] フィールドに、テンプレートの名前を入力します。 名前には、50 文字以内の英数字を指定することができます。
例:Sales_7975ステップ 4 必要に応じて、新しいテンプレートのフィールドを更新します。 詳細については、表 1を参照してください。 ステップ 5 [保存(Save)] をクリックします。 BAT に追加されるテンプレートが、左側の [電話テンプレート(Phone Template)] カラムに表示されます。
次の作業引き続き、テンプレートの電話回線、IP サービス、スピード ダイヤルを追加または更新することができます。
BAT 電話テンプレートの削除
手順
ステップ 1 削除する電話テンプレートを検索します。 ステップ 2 電話テンプレートを削除します。 次のいずれかを実行します。 削除操作を確認するように求めるメッセージが表示されます。 ステップ 3 [OK] をクリックして、テンプレートを削除します。 [電話テンプレートの検索/一覧表示(Find and List Phone Templates)] ウィンドウの電話テンプレート リストのリストから、テンプレート名が消去されます。
関連タスク
BAT 電話テンプレートのフィールドの説明
次の表で、すべての IP テレフォニー デバイスの BAT 電話テンプレートを追加する場合に表示されるフィールドすべてについて説明します。 一部のデバイス タイプには、すべての電話機設定値を必要としないものもあります。また、 Cisco Unified Communications Manager の管理ページで設定された値を表示するだけのフィールドもあります。 BAT ユーザ インターフェイスのアスタリスクが付いているフィールドには、値を入力する必要があります。 アスタリスクの付いていないフィールドはオプションです。
表 1 電話テンプレートのフィールドの説明フィールド
説明
[デバイス情報(Device Information)]
[デバイス信頼モード(Device Trust Mode)]
デバイスが信頼されているか、または信頼されていないかを選択します。 SCCP を使用するアナログ電話と一部のサードパーティのエンドポイント用に、この設定を行うことができます。
[テンプレート名(Template name)]
テンプレートの名前を入力します。
[説明(Description)]
作成する電話テンプレートの説明を入力します。 説明には、任意の言語で最大 50 文字を指定できますが、二重引用符(")、パーセント記号(%)、アンパサンド(&)、バックスラッシュ(\)、山カッコ(<>)は使用できません。
[デバイスプール(Device Pool)]
このグループの電話機またはポートのデバイス プールを選択します。
デバイス プールは、デバイスに共通した特性のセット(たとえば、地域、日付/時刻グループ、 Cisco Unified Communications Manager グループ、自動登録用のコーリング サーチ スペースなど)を定義します。
[共通デバイス設定(Common Device Configuration)]
この電話機を割り当てる共通デバイス設定を選択します。 共通デバイス設定には、特定のユーザに関連付けられた属性(サービスまたは機能)が含まれています。 [共通デバイス設定(Common Device Configuration)] ウィンドウで共通のデバイス設定を行います。 共通デバイス設定の詳細については、『Cisco Unified Communications Manager アドミニストレーション ガイド』を参照してください。
共通デバイス設定の設定値を参照するには、[詳細の表示(View Details)] リンクをクリックします。
[電話ボタンテンプレート(Phone Button Template)]
このグループ内の全電話機のボタン テンプレートを選択します。 ボタン テンプレートによって、ボタンの識別(回線、スピード ダイヤル)と電話機上のボタンの位置が決まります。 ボタン テンプレートには、拡張モジュールが含まれます。
[ソフトキーテンプレート(Softkey Template)]
このグループ内のすべての電話機に使用されるソフトキー テンプレートを選択します。
[共通の電話プロファイル(Common Phone Profile)]
ドロップダウン リスト ボックスで、使用可能な共通の電話プロファイルのリストから、共通の電話プロファイルを選択します。
[コーリングサーチスペース(Calling Search Space)]
このグループの電話機またはポートのコーリング サーチ スペースを選択します。
コーリング サーチ スペースは、ルート パーティションの集合を指定するものです。ルート パーティションの集合は、ダイヤルされた番号のルーティング方法を決定するために検索されます。
[AARコーリングサーチスペース(AAR Calling Search Space)]
自動代替ルーティング(AAR)の実行時にデバイスが使用するコーリング サーチ スペースを選択します。 AAR コーリング サーチ スペースは、帯域幅不足によってコールがブロックされないように、収集された(発信)番号のルーティング方法を決定するために検索されるルート パーティションの集合を指定します。
[メディアリソースグループリスト(Media Resource Group List)]
このグループの電話機またはポートのメディア リソース グループ リスト(MRGL)を選択します。
MRGL は、優先順位が付けられたメディア リソース グループのリストを指定します。 アプリケーションは、MRGL に定義されている優先順位に従って、使用可能なメディア リソースの中から、必要なメディア リソースを選択できます。
[ユーザ保留MOH音源(User Hold MOH Audio Source)]
このグループの電話機またはポートのユーザ保留オーディオ ソースを選択します。
ユーザ保留オーディオ ソースは、ユーザがコールを保留にしたときに再生される音楽のオーディオ ソースを特定します。
[ネットワーク保留MOH音源(Network Hold MOH Audio Source)]
このグループの IP Phone またはポートのネットワーク保留オーディオ ソースを選択します。
ネットワーク保留オーディオ ソースは、システムがコールを保留にするとき(たとえば、ユーザがコールを転送したときや、コール パークにしたとき)に再生される音楽のオーディオ ソースを特定します。
[ロケーション(Location)]
このグループの IP Phone またはポートの適切なロケーションを選択します。
ロケーションは、このロケーションとの間のコールに使用可能な帯域幅の合計を指定します。 ロケーションを [なし(None)] に設定すると、ロケーション機能がこの Cisco IP Phone の消費する帯域幅を管理しないことを示します。
[AARグループ(AAR Group)]
このデバイスの自動代替ルーティング(AAR)グループを選択します。 AAR グループは、帯域幅不足のためにコールがブロックされないように、コールをルーティングするためのプレフィックス番号を提供します。
AAR グループを [<なし(None)>] に設定すると、ブロックされたコールの再ルーティングは行われません。
[ユーザロケール(User Locale)]
このグループの IP Phone に関連付ける国/地域と言語の組み合わせを選択します。
この選択内容によって、言語やフォントを含むロケール属性のどれをこのユーザに適用するか、およびこのユーザの Cisco Unified Communications Manager のユーザ ウィンドウと電話機をどの言語で表示するかが決まります。
[ネットワークロケール(Network Locale)]
このグループの電話機に関連付けるネットワーク ロケールを選択します。
ネットワーク ロケールは、シスコのゲートウェイと電話機が、特定地域の PSTN およびその他のネットワークと通信するときに使用するトーンと断続周期を提供します。
[ビルトインブリッジ(Built In Bridge)]
[ビルトインブリッジ(Built In Bridge)] ドロップダウン リスト ボックスを使用する([オン(On)]、[オフ(Off)]、または [デフォルト(Default)] を選択する)ことにより、割り込み機能のビルトイン会議ブリッジを使用可能または使用不可にします。
設定情報の詳細については、『 Cisco Unified Communications Manager 機能およびサービス ガイド』の「割り込みとプライバシー」を参照してください。
[プライバシ(Privacy)]
プライバシーを必要とする各電話機について、[プライバシ(Privacy)] ドロップダウン リスト ボックスで [オン(On)] を選択します。
設定情報の詳細については、『 Cisco Unified Communications Manager 機能およびサービス ガイド』の「割り込みとプライバシー」を参照してください。
[デバイスモビリティモード(Device Mobility Mode)]
ドロップダウン リスト ボックスから、このデバイスに対してデバイス モビリティ機能のオン/オフを切り替えるか、[デフォルト(Default)] を選択してデフォルトのデバイス モビリティ モードを使用します。
[現在のデバイスモビリティ設定の表示(View Current Device Mobility Settings)] をクリックすると、次のデバイス モビリティ パラメータの現在の値が表示されます。
- [Cisco Unified CMグループ(Cisco Unified Communications Manager Group)]
- [ローミング用デバイスプール(Roaming Device Pool)]
- [ロケーション(Location)]
- [リージョン(Region)]
- [ネットワークロケール(Network Locale)]
- [AARグループ(AAR Group)]
- [AARコーリングサーチスペース(AAR Calling Search Space)]
- [デバイスコーリングサーチスペース(Device Calling Search Space)]
- [メディアリソースグループリスト(Media Resource Group List)]
- [SRST]
ヒント 設定情報の詳細については、『 Cisco Unified Communications Manager 機能およびサービス ガイド』の「デバイス モビリティ」を参照してください。 [オーナーのユーザID(Owner User ID)]
プライマリ電話機ユーザのユーザ ID を入力します。
[モビリティユーザID(Mobility User ID)]
(デュアルモード フォンのみ)
ドロップダウン リスト ボックスから、このデュアルモード フォンが割り当てられているユーザのユーザ ID を選択します。
(注) モビリティ ユーザ ID の設定は、デュアル モード電話機の Cisco Unified Mobility とモバイル ボイス アクセスで使用されます。
(注) オーナーのユーザ ID とモバイル ユーザ ID は異なることがあります。
[電話機のパーソナライゼーション(Phone Personalization)]
ドロップダウン リスト ボックスで電話機のパーソナライゼーションを有効または無効にするか、[デフォルト(Default)] を選択して共通の電話プロファイルに設定されている電話機のパーソナライゼーションを使用します。 次のオプションのいずれかを選択できます。
[サービスのプロビジョニング(Services Provisioning)]
ドロップダウン リスト ボックスにある次の値から、使用するサービスのプロビジョニングの設定値を選択します。
このパラメータでは、電話機が設定ファイル(内部)からプロビジョニングされたサービスまたはサービス URL(外部の URL)から受信したサービスを使用するか、あるいはその両方を使用するかを制御します。 [外部URL(External URLs)] では、サード パーティのプロビジョニング サーバとの下位互換性を確保します。 [両方(Both)] オプションを使用すると、設定ファイルで指定されたサービスを登録できます。また、外部のプロビジョニング サーバからサービスを追加することもできます。
これは必須フィールドです。
[電話ロード名(Phone Load Name)]
該当する場合は、カスタム電話機ロードを入力します。
(注) このフィールドに入力される値は、選択されたモデルのデフォルト値を上書きします。
Cisco IP Phone ソフトウェアおよび設定の詳細については、電話機モデルに対応する『Cisco IP Phone Administration Guide for Cisco Unified Communications Manager』を参照してください。
[ワンボタン割込み(Single Button Barge)]
ドロップダウン リスト ボックスで、このデバイスに対してワンボタン割り込み/C 割り込み機能を有効または無効にするか、[デフォルト(Default)] を選択してサービス パラメータ設定を使用します。
[回線をまたいで参加(Join Across Lines)]
ドロップダウン リスト ボックスで、このデバイスに対して回線をまたいで参加機能を有効または無効にするか、[デフォルト(Default)] を選択してサービス パラメータ設定を使用します。
[信頼されたリレーポイントを使用(Use Trusted Relay Point)]
ドロップダウン リスト ボックスで、 Cisco Unified Communications Manager が信頼されたリレーポイント(TRP)のデバイスをこのメディア エンドポイントで挿入するかどうかについて、有効化または無効化を指定します。 次のいずれかの値を選択します。
- [デフォルト(Default)]:この値を選択すると、デバイスでは、このデバイスに関連付けられた共通デバイス設定の [信頼されたリレーポイントを使用(Use Trusted Relay Point)] の設定値が使用されます。
- [オフ(Off)]:この値を選択すると、このデバイスに対して TRP が使用不可になります。 この設定値は、このデバイスに関連付けられた共通デバイス設定の [信頼されたリレーポイントを使用(Use Trusted Relay Point)] の設定値よりも優先されます。
- [オン(On)]:この値を選択すると、このデバイスに対して TRP が使用可能になります。 この設定値は、このデバイスに関連付けられた共通デバイス設定の [信頼されたリレーポイントを使用(Use Trusted Relay Point)] の設定値よりも優先されます。
信頼されたリレー ポイント(TRP)デバイスには、Trusted Relay Point というラベルの付いた MTP またはトランスコーダ デバイスが指定されます。
エンドポイントに複数のリソース(たとえば、トランスコーダや RSVP エージェント)が必要な場合は、 Cisco Unified Communications Manager により、TRP は関連付けられたエンドポイント デバイスに最も近い位置に配置されます。
エンドポイントに TRP と MTP の両方が必要な場合、TRP は必須の MTP として使用されます。
ヒント コールの動作の詳細については、『 Cisco Unified Communications Manager システム ガイド』で TRP の挿入に関する要件の説明を参照してください。 [BLFオーディオアラート設定(電話がアイドルのとき)(BLF Audible Alert Setting (Phone Idle))]
ドロップダウン リスト ボックスにある次の値から、使用する BLF オーディオ アラートの設定値を選択します。
コールがビジー ランプ フィールド(BLF)ボタンでモニタされている回線のいずれかに着信した場合、このパラメータで現在アイドルの電話機にオーディオ アラートとビジュアル アラートを送信します。
これは必須フィールドです。
[BLFオーディオアラート設定(電話がビジーのとき)(BLF Audible Alert Setting (Phone Busy))]
この必須フィールドでは、コールがビジー ランプ フィールド(BLF)ボタンでモニタされている回線のいずれかに着信した場合、このパラメータで現在使用中の電話機にオーディオ アラートとビジュアル アラートを送信します。
ドロップダウン リスト ボックスにある次の値から、使用する BLF オーディオ アラートの設定値を選択します。
[常にプライム回線を使用する(Always Use Prime Line)]
ドロップダウン リスト ボックスから、次のオプションのいずれかを選択します。
- [オフ(Off)]:電話機がアイドル状態になっているときにいずれかの回線でコールを受信すると、電話機のユーザは、コールを受信した回線からコールに応答します。
- [オン(On)]:電話機がアイドル状態(オフフック)になっているときにいずれかの回線でコールを受信すると、このコールにはプライマリ回線が選択されます。 他の回線のコールの呼び出し音は鳴り続けます。電話機のユーザは、他の回線を選択してこれらのコールに応答する必要があります。
- [デフォルト(Default)]: Cisco Unified Communications Manager は、Cisco CallManager サービスをサポートする Always Use Prime Line サービス パラメータの設定を使用します。
[ボイスメッセージには常にプライム回線を使用する(Always Use Prime Line for Voice Message)]
ドロップダウン リスト ボックスから、次のオプションのいずれかを選択します。
- [オン(On)]:電話機がアイドル状態の場合に電話機のメッセージ ボタンを押すと、電話機のプライマリ回線がボイスメッセージを受信するアクティブな回線になります。
- [オフ(Off)]:電話機がアイドル状態の場合、電話機のメッセージ ボタンを押すと、ボイスメッセージが設定されている回線からボイスメッセージ システムに自動的にダイヤルされます。 Cisco Unified Communications Manager は、ボイスメッセージが設定されている最初の回線を常に選択します。 ボイスメッセージが設定されている回線が存在しない場合に電話機のユーザがメッセージ ボタンを押すと、プライマリ回線が使用されます。
- [デフォルト(Default)]: Cisco Unified Communications Manager は、Cisco CallManager サービスをサポートする Always Use Prime Line for Voice Message サービス パラメータの設定を使用します。
[位置情報(Geo Location)]
ドロップダウン リスト ボックスから、位置情報を選択します。
未指定の位置情報を選択できます。これは、このデバイスを位置情報に関連付けないことを示します。
メニュー オプションで設定された位置情報を選択することもできます。
[機能管理ポリシー(Feature Control Policy)]
このグループの電話機の機能管理ポリシーを選択します。
機能管理ポリシーは、機能のアピアランスおよび電話機に表示される関連付けられたソフトキーを指定します。
[デバイスセキュリティモード(Device Security Mode)]
ドロップダウン リスト ボックスから、デバイスに設定するモードを選択します。
[システムデフォルトの使用(Use System Default)]:電話機はエンタープライズ パラメータのデバイス セキュリティ モードに指定された値を使用します。
[非セキュア(Non-secure)]:電話機にセキュリティ機能はありません。 TCP 接続が Cisco Unified Communications Manager に対して開きます。
[認証のみ(Authenticated)]: Cisco Unified Communications Manager は電話機の整合性と認証を提供します。 NULL/SHA を使用する TLS 接続を開始します。
[暗号化(Encrypted)]: Cisco Unified Communications Manager は、電話の整合性、認証、および暗号化を提供します。 AES128/SHA を使用する TLS 接続を開始します。
このフィールドが表示されるのは、電話機モデルが認証または暗号化をサポートしている場合だけです。
[ビデオコールをオーディオとして再試行(Retry Video Call as Audio)]
このチェックボックスは、コールを受信するビデオ エンドポイントだけに適用されます。 この電話機が、ビデオとして接続しないコールを受信すると、そのコールはオーディオ コールとして接続しようとします。
このチェックボックスはデフォルトでオンになっています。このデバイスは、ビデオ コールをコール制御に送信して再ルーティングする直前に、オーディオ コールとして(ビデオ コールとして接続できない場合)そのビデオ コールをリトライします。
このチェックボックスをオフにすると、ビデオとして接続に失敗したビデオ コールは、オーディオ コールとしての確立を試行しません。 この場合、コールはコール制御を行えず、コール制御は自動代替ルーティング(AAR)やルート リスト、ハント リストによってコールをルーティングします。
[プレゼンテーションインジケータを無視(内線コールのみ)(Ignore Presentation Indicators (Internal Calls Only))]
コールごとにコール表示制限を設定するには、このチェックボックスをオンにします。 このチェックボックスをオンにすると、 Cisco Unified Communications Manager は内部コールに対して受信したすべての表示制限を無視します。
[CTIからのデバイスの制御を許可(Allow Control of Device from CTI)]
このチェックボックスをオンにすると、CTI で制御可能なすべてのデバイスを CTI から制御できます。
このチェックボックスは、CTI で制御可能なデバイスタイプおよびデバイスプロトコルに基づいて、オンまたはオフにできます。 たとえば、SIP プロトコルを使用する 7975 は CTI ではサポートされていないので、チェックボックスをオフにする必要があります。 SCCP プロトコルを使用する 7975 は CTI でサポートされているので、チェックボックスをオンにする必要があります。
[ハントグループにログイン(Logged Into Hunt Group)]
このチェックボックスは、デフォルトですべての電話機に対してオンになり、電話機が現在ハント リスト(グループ)にログインしていることを示します。 電話機がハント リストに追加されたときに、管理者はこのチェックボックスをオン(オフ)にすることにより、ユーザをログインまたはログアウトさせることができます。
ユーザは電話機のソフトキーを使用して、その電話機をハント リストにログインさせ、またはハント リストからログアウトさせます。
[リモートデバイス(Remote Device)]
SCCP を介した接続で、リモート サイトへの接続時間が遅延する場合、[電話の設定(Phone Configuration)] ウィンドウにある [リモートデバイス(Remote Device)] チェックボックスをオンにします。 このチェックボックスをオンにすると、Cisco Unified Communications Manager では、電話デバイスが登録されたときにバッファを割り当て、電話機に SCCP メッセージを組み込みます。
この機能はリソースを消費するため、SCCP を実行している電話機にシグナリングの遅延が生じている場合にだけ、このチェックボックスをオンにしてください。 このオプションは、ほとんどのユーザには必要ありません。
[保護されたデバイス(Protected Device)]
このチェックボックスをオンにして、電話機を"保護された"デバイスとして指定します。 これにより、コールが暗号化されていて、かつ、両方の電話機が保護されたデバイスとして設定されている場合、電話機では、2 秒間のトーンを再生し、ユーザに通知することができます。 このトーンは、コールが応答されたときに両方の電話機で再生されます。 このトーンが再生されるのは、両方の電話機が「保護」になっていて、暗号化メディアを介してコールが発信された場合だけです。
ヒント セキュアなトーン機能と設定要件の詳細については、『Cisco Unity Connection System Administration Guide』を参照してください。 [ホットラインデバイス(Hotline Device)]
このデバイスをホットライン デバイスにするには、このチェックボックスをオンにします。 ホットライン デバイスは、他のホットライン デバイスにだけ接続できます。 この機能は、オフフックになると自動的に 1 つの電話番号をダイヤルするように電話機を設定する PLAR の拡張機能です。 ホットラインでは、PLAR を使用するデバイスに適用できる制限事項が追加されます。
ホットラインを実装するには、補足サービス ソフトキーのないソフトキー テンプレートを作成して、ホットライン デバイスに適用する必要もあります。
[番号表示トランスフォーメーション(Number Presentation Transformation)]
[この電話からのコールの発信者ID(Caller ID for Calls from This Phone)]
[発呼側トランスフォーメーションCSS(Calling Party Transformation CSS)]
ドロップダウン リストボックスで、この電話機が通話を開始したときに適用する発呼側のトランスフォーメーション パターンが含まれているコーリング サーチ スペース(CSS)を選択します。
この電話機がコールを開始すると、Unified Communications Manager は一致した発呼側のトランスフォーメーション パターンで構成された番号トランスフォーメーションを使用して、発呼側を変換します。 この設定を使用すると、Unified Communications Manager がコールをルーティングする前に、発呼側の番号を変換することが可能です。 たとえば、トランスフォーメーション パターンにより、電話の内線番号を E.164 の番号に変えることができます。 ユーザが番号の代わりに URI を使用してダイヤルする際は、一般的にこの設定が行われます。 ユーザが番号を使用してダイヤルする場合、Unified Communications Manager はさまざまなパターンで発呼側のトランスフォーメーションを可能にします。この設定は、ユーザが URI を使用してダイヤルした場合でも、同様のトランスフォーメーション プロビジョニングを提供します。
[デバイスプールの発呼側トランスフォーメーションCSSを使用(Use Device Pool Calling Party Transformation CSS)]([この電話からのコールの発信者ID(Caller ID for Calls from This Phone)])
この電話機から開始された発呼側のコールを変換するため、この電話機が属しているデバイス プールに設定されている [発呼側トランスフォーメーションCSS(Calling Party Transformation CSS)] を使用するには、このチェックボックスをオンにします。 デバイス プールでは、[電話の設定(Phone Settings)] の [発呼側トランスフォーメーションCSS(Calling Party Transformation CSS)] が、この電話機から開始された発呼側のコールを変換するために使用されます。
この設定ウィンドウに表示される [発呼側トランスフォーメーションCSS(Calling Party Transformation CSS)] の設定を適用する場合は、チェックボックスをオフのままにしておきます。
[リモート番号トランスフォーメーション(Remote Number Transformation)]
[発呼側トランスフォーメーションCSS(Calling Party Transformation CSS)]
ドロップダウン リスト ボックスで、この電話機で受信したコールのリモート コール番号に対して適用する発呼側のトランスフォーメーション パターンが含まれているコーリング サーチ スペース(CSS)を選択します。
Unified Communications Manager は一致した発呼側のトランスフォーメーション パターンで構成された番号トランスフォーメーションを使用して、デバイスに提示する前にリモート コール番号を変換します。
たとえば、トランスフォーメーション パターンでは、E.164 形式のリモート番号をローカライズ バージョンに変更することができます。
この設定を使用して、この電話機から開始されたダイレクト コールのリモート接続番号を変換します。 また、この設定は、コールの方向に関係なく、機能の呼び出し後にリモート接続番号を変換する場合にも使用されます。 リモート接続番号のトランスフォーメーションは、Cisco Call Manager サービスの Advanced セクションにある、Apply Transformations on Remote Number サービス パラメータを使用して制御されます。 詳細については、このパラメータの説明を参照してください。
[デバイスプールの発呼側トランスフォーメーションCSSを使用(Use Device Pool Calling Party Transformation CSS)]([デバイスモビリティ関連情報(Device Mobility Related Information)])
リモート コールとリモート接続番号を変換するため、この電話機が属しているデバイス プールに設定されている [発呼側トランスフォーメーションCSS(Calling Party Transformation CSS)] を適用するには、このチェックボックスをオンにします。 デバイス プールでは、[デバイスモビリティ関連情報(Device Mobility Related Information)] セクションの [発呼側トランスフォーメーションCSS(Calling Party Transformation CSS)] が、リモート コールとリモート接続番号を変換するために使用されます。
リモート番号を変換するため、この設定ウィンドウに表示される [発呼側トランスフォーメーションCSS(Calling Party Transformation CSS)] の設定を適用する場合は、チェックボックスをオフのままにしておきます。
[関連付けられたモビリティID(Associated Mobility Identity)]:これらのモビリティ用フィールドは、Nokia S60 デバイスおよび Cisco Unified Mobile Communicator 電話機だけで利用可能です。 [新規携帯IDの追加(Add New Mobile Identity)] リンクをクリックして、[携帯IDの設定(Mobile Identity Configuration)] ページを表示します。
[名前(Name)]
携帯 ID を識別する名前を入力します。
[接続先番号(Destination Number)]
携帯 ID に対応する電話番号を入力します。 市外局番のほか、外線へのアクセスに必要な追加の番号があればすべて含めます。 最大フィールド長は 24 文字です。値として使用できるのは、0 ~ 9 の数字、*、および # です。 スマート フォンの宛先の発信者 ID を設定することをお勧めします。
接続先番号のルーティングに必要なトランスレーション パターンまたはルート パターンを追加してください。
[呼び出し開始タイマー(Answer Too Soon Timer)]
携帯電話が応答されるまでに経過する最短時間(ミリ秒)。
範囲:0 ~ 10,000 ミリ秒
デフォルト:1,500 ミリ秒
[呼び出し終了タイマー(Answer Too Late Timer)]
携帯電話が応答されるまでに経過する最長時間(ミリ秒)。
範囲:10,000 ~ 300,000 ミリ秒
デフォルト:19,000 ミリ秒
[呼び出し前の遅延タイマー(Delay Before Ringing Timer)]
コールがデスク電話から携帯電話に転送された場合、携帯電話で呼び出し音が鳴るまでに経過する時間を入力します。
範囲:0 ~ 30,000 ミリ秒
デフォルト:4,000 ミリ秒
[時刻アクセス(Time of Day Access)]
ドロップダウン リスト ボックスから、この宛先に関連付けられた時刻アクセス レコードを選択します。
[タイムゾーン(Time Zone)]
ドロップダウン リスト ボックスから、リモート接続先用に使用するタイム ゾーンを選択します。
(注) リモート接続先に使用するタイム ゾーンは時刻アクセス機能で使用され、接続先に対するコールを許可または拒否します。
[携帯電話(Mobile Phone)]
デスク電話で応答されたコールをリモート接続先として携帯電話に転送する場合、このチェックボックスをオンにします。
(注) Cisco Unified Mobility をリモート接続先で機能させるには、このチェックボックスをオンにする必要があります。
[Cisco Unified Mobilityの有効化(Enable Cisco Unified Mobility)]
このチェックボックスをオンにすると、コールの着信時にデスク電話とリモート接続先で同時に呼び出し音を鳴らすことができます。
[関連付けられたリモート接続先(Associated Remote Destinations)]:[新規リモート接続先の追加(Add a New Remote Destination)] リンクをクリックすると、[リモート接続先の設定(Remote Destination Configuration)] ページが表示されます。
[名前(Name)]
リモート接続先を識別する名前を入力します。
[接続先番号(Destination Number)]
接続先の電話番号を入力します。 市外局番のほか、外線へのアクセスに必要な追加の番号があればすべて含めます。 最大フィールド長は 24 文字です。値として使用できるのは、0 ~ 9 の数字、*、および # です。 リモート接続先の発信者 ID を設定することをお勧めします。
接続先番号のルーティングに必要なトランスレーション パターンまたはルート パターンを追加してください。
[呼び出し開始タイマー(Answer Too Soon Timer)]
携帯電話が応答されるまでに経過する最短時間(ミリ秒)。
範囲:0 ~ 10,000 ミリ秒
デフォルト:1,500 ミリ秒
[呼び出し終了タイマー(Answer Too Late Timer)]
携帯電話が応答されるまでに経過する最長時間(ミリ秒)。
範囲:10,000 ~ 300,000 ミリ秒
デフォルト:19,000 ミリ秒
[呼び出し前の遅延タイマー(Delay Before Ringing Timer)]
コールがデスク電話から携帯電話に転送された場合、携帯電話で呼び出し音が鳴るまでに経過する時間を入力します。
範囲:0 ~ 30,000 ミリ秒
デフォルト:4,000 ミリ秒
[時刻アクセス(Time of Day Access)]
ドロップダウン リスト ボックスから、リモート接続先に関連付けられた時刻アクセス レコードを選択します。
[タイムゾーン(Time Zone)]
ドロップダウン リスト ボックスから、リモート接続先用に使用するタイム ゾーンを選択します。
(注) このリモート接続先に使用するタイム ゾーンは時刻アクセス機能で使用され、このリモート接続先に対するコールを許可または拒否します。
[携帯電話(Mobile Phone)]
デスク電話で応答されたコールをリモート接続先として携帯電話に転送する場合、このチェックボックスをオンにします。
(注) Cisco Unified Mobility をリモート接続先で機能させるには、このチェックボックスをオンにする必要があります。
[Cisco Unified Mobilityの有効化(Enable Cisco Unified Mobility)]
このチェックボックスをオンにすると、コールの着信時にデスク電話とリモート接続先で同時に呼び出し音を鳴らすことができます。
[プロトコル固有情報(Protocol Specific Information)]
[パケットキャプチャモード(Packet Capture Mode)]
ドロップダウン リスト ボックスから、信号パケット キャプチャに設定するモードを選択します。
[パケットキャプチャ時間(Packet Capture Duration)]
パケット キャプチャの時間を分単位で入力します。 最大 300 分の継続時間を入力できます。 デフォルトの継続時間は 60 分です。
[BLFプレゼンスグループ(BLF Presence Group)]
BLF プレゼンス機能で使用すると、SIP または SCCP を実行する電話機は、BLF スピード ダイヤル ボタンとして電話機に設定されたプレゼンス エンティティに関するステータス(たとえば、電話番号)を要求するので、ウォッチャとして機能します。
電話機によってプレゼンス エンティティのステータスを受信するには、電話番号に適用されるプレゼンス グループのステータスを [BLFプレゼンスグループの設定(BLF Presence Group Configuration)] ウィンドウに示されるとおり表示するよう許可されている BLF プレゼンス グループを選択します。
ヒント BLF プレゼンス機能の詳細については、『 Cisco Unified Communications Manager 機能およびサービス ガイド』を参照してください。 [SIPダイヤルルール(SIP Dial Rules)]
必要に応じて、適切な SIP ダイヤル ルールを選択します。 SIP ダイヤル ルールにより、SIP を実行する Cisco IP Phone 7905、7912、7940、および 7975 ではローカルのダイヤル プランを使用できるため、コールが処理される前にユーザがキーを押したりタイマーを待ったりする必要がなくなります。
ダイヤル ルールを SIP を実行する IP Phone に適用しない場合は、[SIPダイヤルルール(SIP Dial Rules)] フィールドを [<なし(None)>] のままにします。 この場合、コールを処理するには、ユーザが [ダイヤル] ソフトキーを使用するか、タイマーが期限切れになるのを待つ必要があります。
[デバイスセキュリティプロファイル(Device Security Profile)]
SCCP または SIP を実行する電話機の場合は、デバイスに適用するセキュリティ プロファイルを選択します。
すべての電話で、セキュリティ プロファイルを適用する必要があります。 電話機がセキュリティをサポートしていない場合は、非セキュア プロファイルを選択します。
[MTP優先発信コーデック(MTP Preferred Originating Codec)]
ドロップダウン リスト ボックスから、SIP コールにメディア ターミネーション ポイントが必要となる場合に使用するコーデックを選択します。
[再ルーティング用コーリングサーチスペース(Rerouting Calling Search Space)]
ドロップダウン リスト ボックスから、再ルーティングに使用するコーリング サーチ スペースを選択します。
参照先へのルートを検索するときは、Referrer の再ルーティング コーリング サーチ スペースが使用されます。 再ルーティング コーリング サーチ スペースが原因で参照が失敗すると、Refer Primitive は「405 Method Not Allowed」メッセージによって要求を拒否します。
リダイレクション(3xx)プリミティブおよび転送機能でも、リダイレクト先または転送先を検索するときに、再ルーティング コーリング サーチ スペースが使用されます。
[アウトオブダイアログREFERコーリングサーチスペース(Out-Of-Dialog Refer Calling Search Space)]
ドロップダウン リスト ボックスから、アウトオブダイアログ REFER コーリング サーチ スペースを選択します。
Cisco Unified Communications Manager は、アウトオブダイアログ(OOD)REFER 許可コーリング サーチ スペース(CSS)を使用して SIP アウトオブダイアログ REFER を許可します。 管理者は、参照側の OOD CSS を設定することによって、アウトオブダイアログ REFER の使用を制限します。 参照プリミティブでは、OOD REFER 要求を拒否し、「403 Forbidden」というメッセージを返します。
[SUBSCRIBEコーリングサーチスペース(SUBSCRIBE Calling Search Space)]
プレゼンス機能で使用した場合、電話機からの登録要求を Cisco Unified Communications Manager がルーティングする方法は、SUBSCRIBE コーリング サーチ スペースによって決まります。 ドロップダウン リスト ボックスから、この目的に使用するコーリング サーチ スペースを選択します。
ヒント プレゼンス機能の詳細については、『 Cisco Unified Communications Manager 機能およびサービス ガイド』を参照してください。 [SIPプロファイル(SIP Profile)]
デフォルト SIP プロファイルまたは以前作成された特定のプロファイルを選択します。 SIP プロファイルは、デフォルトのテレフォニー イベント ペイロードのタイプ、登録タイマーおよびキープアライブ タイマー、メディア ポート、Iris、および動的 DNS サーバ アドレスなど、電話機の特定の SIP 情報を提供します。
[ダイジェストユーザ(Digest User)]
ダイジェスト認証(SIP セキュリティ)で使用します。電話機に関連付けるエンド ユーザを選択します。
選択したユーザのダイジェスト信用証明書を設定したことを確認します([エンドユーザの設定(End User Configuration)] ウィンドウを参照)。
電話機の設定を保存し電話機をリセットした後、ユーザのダイジェスト信用証明書が、電話機の設定ファイルに追加されます。
ダイジェスト認証の詳細については、『 Cisco Unified Communications Manager セキュリティ ガイド』を参照してください。
[メディアターミネーションポイントが必須(Media Termination Point Required)]
このフィールドでは、H.323 がサポートしない機能(たとえば、保留や転送)を実装するために、メディア ターミネーション ポイントを使用するかどうかを指定します。
機能を実装するために MTP を使用する場合は、[メディアターミネーションポイントが必須(Media Termination Point Required)] チェックボックスをオンにします。 機能を実装するときに MTP を使用しない場合は、[メディアターミネーションポイントが必須(Media Termination Point Required)] チェックボックスをオフにします。
このチェックボックスは、H.323 クライアント、および H.245 Empty Capabilities Set をサポートしていない H.323 デバイスだけに使用してください。または、メディア ストリーミングを 1 つのソースで終了させる場合に使用してください。
[不在ポート(Unattended Port)]
このデバイス上の不在ポートを示すには、このチェックボックスをオンにします。
[DTMF受信が必要(Require DTMF Reception)]
SIP および SCCP を実行している電話機の場合、この電話機に DTMF 受信が必要なときは、このチェックボックスをオンにします。
[RFC2833が無効(RFC2833 Disabled)]
SCCP を実行している電話機の場合、RFC2833 サポートを使用不可にするときは、このチェックボックスをオンにします。
[CAPFの情報(Certification Authority Proxy Function (CAPF) Information)](これらのパラメータは、認証または暗号化のサポート機能のあるデバイスの場合にだけ表示されます)
[証明書の操作(Certificate Operation)]
ドロップダウン リスト ボックスで、次のオプションの中から実行する証明書のオペレーションを選択します。
[認証モード(Authentication Mode)]
ドロップダウン リスト ボックスから、証明書の操作中に電話機を CAPF で認証するために使用する認証モードを、次のオプションから選択します。
- [Nullストリング(By Null String)]:ユーザが介入することなく、ローカルで有効な証明書をインストール、アップグレード、削除、またはトラブルシューティングします。
- [<なし(None)>]
(注) このオプションは、認証モードの値を指定するプロンプトを表示します。
- [認証ストリング(By Authentication String)]:ユーザが電話機で CAPF 認証文字列を入力した場合に限り、ローカルで有効な証明書をインストール、更新、削除、またはトラブルシューティングします。
- [既存の証明書(LSCの優先)(By Existing Certificate (precedence to LSC))]:製造元でインストールされる証明書(MIC)またはローカルで有効な証明書(LSC)が電話機に存在する場合、LSC をインストール、アップグレード、削除、またはトラブルシューティングします。
(注) このオプションを選択する前に、電話機内に証明書が存在することを確認してください。 このオプションを選択し、電話機内に証明書が存在しない場合、処理は失敗します。
- [既存の証明書(MICの優先)(By Existing Certificate (precedence to MIC))]:LSC または MIC が電話機に存在する場合、LSC をインストール、アップグレード、削除、またはトラブルシューティングします。
(注) このオプションを選択する前に、電話機内に証明書が存在することを確認してください。 このオプションを選択し、電話機内に証明書が存在しない場合、処理は失敗します。
[認証文字列(Authentication String)]
セキュリティ プロファイルの [認証モード(Authentication Mode)] ドロップダウン リスト ボックスで [認証ストリング(By Authentication String)] オプションを選択した場合、この設定が適用されます。 4 ~ 10 桁の数値を手動で入力します。 ローカルで有効な証明書をインストール、アップグレード、またはトラブルシューティングするには、電話機のユーザまたは管理者が認証文字列を電話機に入力する必要があります。
[キーサイズ(ビット)(Key Size (Bits))]
ドロップダウン リスト ボックスで、証明書のキー サイズを次のオプションから選択します。
(注) このオプションは、証明書のキー サイズの値を指定するプロンプトを表示します。
(注) デフォルトの設定よりも大きいキー サイズを選択した場合、キーの生成に必要なエントロピーを生成するために長い時間がかかります。 キー生成の優先順位を低く設定すると、処理中に電話機を動作させることができます。 電話機のモデルによっては、キー生成が完了するまでに 30 分以上かかることがあります。
[操作の完了期限(Operation Completes By)]
このフィールドは、[証明書の操作(Certificate Operation)] の [インストール/アップグレード(Install/Upgrade)]、[削除(Delete)]、および [トラブルシューティング(Troubleshoot)] オプションをサポートし、操作を完了させる日付および時刻を指定します。
[証明書の操作ステータス(Certificate Operation Status)]
このフィールドは、認証操作の進行状況を表示します。たとえば、「<[操作タイプ(operation type)]> [待機中(pending)]、[失敗(failed)]、または [成功(successful)] です。ここで、操作タイプは [証明書の操作(Certificate Operation)] の [インストール/アップグレード(Install/Upgrade)]、[削除(Delete)]、または [トラブルシューティング(Troubleshoot)] オプションを表します。 このフィールドに表示される情報は変更できません。
[拡張モジュール情報(Expansion Module Information)]
[モジュール1(Module 1)]
電話機に取り付けられている場合は拡張モジュールを選択します。
[モジュール1ロード名(Module 1 Load Name)]
最初の Cisco Unified IP Phone Expansion Module のファームウェア ロードを入力します(該当する場合)。 デフォルト ロードを使用する場合は、このフィールドをブランクのままにします。
[モジュール2(Module 2)]
電話機に取り付けられている場合は拡張モジュールを選択します。
[モジュール2ロード名(Module 2 Load Name)]
2 番目の Cisco Unified IP Phone Expansion Module のファームウェア ロードを入力します(該当する場合)。 デフォルト ロードを使用する場合は、このフィールドをブランクのままにします。
Cisco Unified IP Phone - [外部データ位置情報(External Data Locations)]
[情報(Information)]
Cisco Unified IP Phone の情報ボタンのヘルプ テキスト URL を入力します。
[ディレクトリ(Directory)]
Cisco Unified IP Phone のディレクトリ サーバの URL を入力します。
[メッセージ(Messages)]
Cisco Unified IP Phone のボイスメッセージのアクセス パイロット番号を入力します。
[サービス(Services)]
Cisco Unified IP Phone のサービス メニューの URL を入力します。
[認証サーバ(Authentication Server)]
電話機の Web サーバに対する要求を認証するときに、電話機が使用する URL を入力します。 認証 URL を指定しない場合は、認証を必要とする Cisco Unified IP Phone モデルの拡張機能は動作しません。 デフォルト値を受け入れるには、このフィールドをブランクのままにします。
デフォルトでは、この URL は、インストール時に設定された Cisco Unified Communications セルフケア ポータル ウィンドウにアクセスします。
[プロキシサーバ(Proxy Server)]
電話機の HTTP クライアントから非ローカル ホスト アドレスにアクセスするために、プロキシ HTTP 要求に使用されるホストおよびポート(たとえば、proxy.cisco.com:80)を入力します。
電話機が、サービスの中で URL(たとえば、www.cisco.com)を受信するときに cisco.com ドメインで設定されていない場合、その電話機はプロキシサーバを使用してその URL にアクセスします。 cisco.com ドメインで設定されている場合、電話機は、URL と同じドメインにいるので、プロキシを使用せずに URL にアクセスします。
デフォルト値を受け入れるには、このフィールドをブランクのままにします。
[アイドル(Idle)]
[アイドルタイマー(Idle Timer)] フィールドで指定された時間、電話機が使用されなかったときに、Cisco Unified IP Phone LCD スクリーンにアイドル表示として表示される XML サービスの URL を入力します。 たとえば、電話機が 5 分間使用されなかったときに、LCD スクリーンにロゴを表示できます。 デフォルト値を使用する場合には、このフィールドをブランクのままにします。
[アイドルタイマー(Idle Timer)]
電話機に許容される非動作時間(秒数)を入力します。非動作のままこの時間が経過すると、電話機は [アイドル(Idle)] フィールドに指定された URL を表示します。 デフォルト値を使用する場合には、このフィールドをブランクのままにします。
[セキュア認証URL(Secure Authentication URL)]
電話機の Web サーバに対する要求を検証するために、この電話機が使用するセキュア URL を入力します。
(注) [セキュア認証URL(Secure Authentication URL)] の値を指定しないと、デバイスでは非セキュア URL が使用されます。 セキュア URL と非セキュア URL の両方を指定した場合、デバイスではデバイスの持つ機能に応じて適切な URL が選択されます。
デフォルトでは、この URL は、インストール時に設定された Cisco Unified CM のユーザ オプション ウィンドウにアクセスします。
デフォルト値を受け入れるには、このフィールドをブランクのままにします。
最大長:255
[セキュアディレクトリURL(Secure Directory URL)]
電話機がディレクトリ情報を取得する際の取得元となるサーバのセキュア URL を入力します。 このパラメータは、ディレクトリ ボタンを押したときに、セキュリティ保護された Cisco Unified IP Phone で使用する URL を指定します。
(注) [セキュアディレクトリURL(Secure Directory URL)] の値を指定しないと、デバイスでは非セキュア URL が使用されます。 セキュア URL と非セキュア URL の両方を指定した場合、デバイスではデバイスの持つ機能に応じて適切な URL が選択されます。
デフォルト値を受け入れるには、このフィールドをブランクのままにします。
最大長:255
[セキュアアイドルURL(Secure Idle URL)]
[アイドルタイマー(Idle Timer)] フィールドの指定に従って電話機がアイドル状態になったときに、Cisco Unified IP Phone のディスプレイに表示する情報のセキュア URL を入力します。 たとえば、電話機が 5 分間使用されなかったときに、LCD 上にロゴを表示できます。
(注) [セキュアアイドルURL(Secure Idle URL)] の値を指定しないと、デバイスでは非セキュア URL が使用されます。 セキュア URL と非セキュア URL の両方を指定した場合、デバイスではデバイスの持つ機能に応じて適切な URL が選択されます。
デフォルト値を受け入れるには、このフィールドをブランクのままにします。
最大長:255
[セキュア情報URL(Secure Information URL)]
Cisco Unified IP Phone がヘルプ テキスト情報を検索できるサーバ ロケーションのセキュア URL を入力します。 この情報は、ユーザが情報([i])ボタンまたは疑問符([?])ボタンを押すと表示されます。
(注) [セキュア情報URL(Secure Information URL)] の値を指定しないと、デバイスでは非セキュア URL が使用されます。 セキュア URL と非セキュア URL の両方を指定した場合、デバイスではデバイスの持つ機能に応じて適切な URL が選択されます。
デフォルト値を受け入れるには、このフィールドをブランクのままにします。
最大長:255
[セキュアメッセージURL(Secure Messages URL)]
メッセージ サーバのセキュア URL を入力します。 ユーザがメッセージ ボタンを押すと、Cisco Unified IP Phone はこの URL に接続されます。
(注) [セキュアメッセージURL(Secure Messages URL)] の値を指定しないと、デバイスでは非セキュア URL が使用されます。 セキュア URL と非セキュア URL の両方を指定した場合、デバイスではデバイスの持つ機能に応じて適切な URL が選択されます。
デフォルト値を受け入れるには、このフィールドをブランクのままにします。
最大長:255
[セキュアサービスURL(Secure Services URL)]
Cisco Unified IP Phone サービスのセキュア URL を入力します。 これは、ユーザがサービス ボタンを押したときに、セキュアな Cisco Unified IP Phone が接続される場所です。
(注) [セキュアサービスURL(Secure Services URL)] の値を指定しないと、デバイスでは非セキュア URL が使用されます。 セキュア URL と非セキュア URL の両方を指定した場合、デバイスではデバイスの持つ機能に応じて適切な URL が選択されます。
デフォルト値を受け入れるには、このフィールドをブランクのままにします。
最大長:255
[エクステンションモビリティ(デバイスプロファイル)情報(Extension Mobility (Device Profile) Information)]
[エクステンションモビリティの有効化(Enable Extension Mobility)]
エクステンション モビリティ機能を使用可能にする場合に、このチェックボックスをオンにします。 エクステンション モビリティを使用すると、ユーザは、Cisco IP Phone にログインおよびログアウトすることができます。 エクステンション モビリティの詳細については、『 Cisco Unified Communications Manager 機能およびサービス ガイド』を参照してください。
[ログアウトプロファイル(Log Out Profile)]
エクステンション モビリティのユーザがログアウトするときに電話機がロードするプロファイルを選択します。 Cisco Unified Communications Manager の管理ページでログアウト プロファイルを設定する必要があります。
[現在のデバイス設定を使用(Use Current Device Setting)]:これを選択すると、自動生成されたデバイス プロファイルが、デフォルト デバイス プロファイルとして作成されます。
[ユーザデバイスプロファイルを選択(Select a User Device Profile)]:これを選択すると、定義済みのユーザ デバイス プロファイルが割り当てられ、このデバイスのデフォルト デバイス プロファイルになります。
選択されたユーザ デバイス プロファイルは、ログインしているユーザがいないとき、デバイスにロードされます。
[MLPP情報(Multilevel Precedence and Preemption (MLPP) Information)]
[MLPP通知(MLPP Indication)]
(使用可能な場合)優先トーンを再生する機能のあるデバイスが、MLPP 優先コールを行うときにその機能を使用するかどうかを指定します。
ドロップダウン リスト ボックスにある次のオプションの中から、デバイスに割り当てる設定を選択します。
- [デフォルト(Default)]:このデバイスは、デバイス プールから [MLPP通知(MLPP Indication)] の設定値を引き継ぎます。
- [オフ(Off)]:デバイスは MLPP 優先コールの通知を送信しません。
- [オン(On)]:デバイスは MLPP 優先コールの通知を送信します。
(注) [MLPPプリエンプション(MLPP Preemption)] が [強制(Forceful)] で [MLPP通知(MLPP Indication)] が [オフ(Off)] という組み合わせではデバイスを設定しないでください。
[MLPPプリエンプション(MLPP Preemption)]
進行中のコールを優先できるデバイスが MLPP 優先コールの発信時にその優先機能を使用するかどうかを指定します(使用可能な場合)。
ドロップダウン リスト ボックスにある次のオプションの中から、デバイスに割り当てる設定を選択します。
- [デフォルト(Default)]:このデバイスは、デバイス プールから [MLPPプリエンプション(MLPP Preemption)] の設定値を引き継ぎます。
- [無効(Disabled)]:デバイスは MLPP 優先コールを行うときに進行中のコールをプリエンプション処理しません。
- [強制(Forceful)]:デバイスは MLPP 優先コールを行うときに進行中のコールをプリエンプション処理します。
(注) [MLPPプリエンプション(MLPP Preemption)] が [強制(Forceful)] で [MLPP通知(MLPP Indication)] が [オフ(Off)] という組み合わせではデバイスを設定しないでください。
[MLPPドメイン(MLPP Domain)]("0000FF" など)
このデバイスに関連付けられている MLPP ドメインの 16 進数値を入力します。 このフィールドはブランクまたは 0 ~ FFFFFF の値である必要があります。
[H.323デバイス情報(H.323 Device Information)]
[シグナリングポート(Signaling Port)]
このデバイスが使用する H.225 シグナリング ポートの値を指定します。
デフォルト値は 1720 です。 有効な値は 1~ 65535 です。
[ビデオコールをオーディオとして再試行(Retry Video Call as Audio)]
このチェックボックスは、コールを受信するビデオ エンドポイントだけに適用されます。 この電話機が、ビデオとして接続しないコールを受信すると、そのコールはオーディオ コールとして接続しようとします。
デフォルトでは、このチェックボックスはオンになっており、送信側デバイスが、オーディオ コールとして接続していないビデオ コールを即座に再試行し、その後で再ルーティングのためにコール制御にコールを送るよう指定されています。
このチェックボックスをオフにすると、ビデオとして接続できないビデオ コールはコール制御を行えません。 この時点で、コール制御はそのコールをルート リスト内で再ルーティングします。 自動代替ルーティング(AAR)が設定され使用可能になっている場合、コール制御はルート リスト間のコールも再ルーティングします。
[ファーエンドH.245ターミナル機能セットを待機(Wait for Far End H.245 Terminal Capability Set)]
デフォルトでは、このチェックボックスはオンになっています。これは、 Cisco Unified Communications Manager がデバイスと機能の交換を開始するように指定していることを意味します。 このチェックボックスは、 Cisco Unified Communications Manager が、先に遠端の H.245 ターミナル機能セットを受信してから、その H.245 ターミナル機能セットを送信する必要があることを指定します。
[H.323プロトコル固有情報(H.323 Protocol Specific Information)]
[SRTPを許可(SRTP Allowed)]
このチェックボックスをオンにすると、ネットワークで IPSec を設定してエンド ツー エンドのセキュリティを提供する必要があります。 この設定を行わないと、キーやその他の情報が暴露されます。
[MTP優先発信コーデック(MTP Preferred Originating Codec)]
ドロップダウン リスト ボックスから、SIP コールにメディア ターミネーション ポイントが必要となる場合に使用するコーデックを選択します。
[メディアターミネーションポイントが必須(Media Termination Point Required)]
H.323 がサポートしていない機能(保留や転送など)の実装にメディア ターミネーション ポイント(MTP)を使用するかどうかを指示する場合に使用します。
メディア ターミネーション ポイントを使用して機能を実装する場合は [メディアターミネーションポイントが必須(Media Termination Point Required)] チェックボックスをオンにします。 メディア ターミネーション ポイントを使用して機能を実装しない場合は [メディアターミネーションポイントが必須(Media Termination Point Required)] チェックボックスをオフにします。
このチェックボックスは、H.323 クライアント、および H.245 Empty Capabilities Set をサポートしていない H.323 デバイスだけに使用してください。または、メディア ストリーミングを 1 つのソースで終了させる場合に使用してください。
このチェックボックスをオンにして MTP を要求し、このデバイスがビデオ コールのエンドポイントになると、コールはオーディオ専用として機能します。
[H.323情報(H.323 Information)]
[発信者IDパターン(Outgoing Caller ID Pattern)]
電話機への着信コールに対して、発信者 ID に使用するパターンを、0 ~ 24 桁で入力します。
[発呼者の選択(Calling Party Selection)]
次のいずれかのオプションを選択して、送信される電話番号を指定します。
- [発信元(Originator)]:発信側デバイスの電話番号を送信します。
- [最初のリダイレクト番号(First Redirect Number)]:リダイレクトするデバイスの電話番号を送信します。
- [最後のリダイレクト番号(Last Redirect Number)]:最後にコールをリダイレクトするデバイスの電話番号を送信します。
- [最初のリダイレクト番号(外部)(First Redirect Number (External))]:リダイレクトするデバイスの電話番号を送信します。
- [最後のリダイレクト番号(外部)(Last Redirect Number (External))]:コールを最後にリダイレクトするデバイスの電話番号を送信します。
[発呼者の表示(Calling Party Presentation)]
セントラル オフィスが発信者 ID を送信するか、非通知にするかを選択します。
[IE配信を表示(Display IE Delivery)]
発呼側と着信側の名前通知サービスに対して、SETUP メッセージおよび CONNECT メッセージ内の表示情報要素(IE)を通知するには、このチェックボックスをオンにします。
[番号IE配信のリダイレクト - アウトバウンド(Redirecting Number IE Delivery - Outbound)]
コールの自動転送時に最初のリダイレクト番号とコールのリダイレクト理由を知らせるために、 Cisco Unified Communications Manager からの発信 SETUP メッセージに番号 IE のリダイレクトを含めるには、このチェックボックスをオンにします。
送信 SETUP メッセージから最初の転送番号と転送理由を除外するには、チェックボックスをオフにします。
ボイスメッセージ統合だけの場合は、番号 IE のリダイレクトを使用します。 設定したボイスメッセージ システムが番号 IE のリダイレクトをサポートしている場合は、このチェックボックスをオンにします。
[番号IE配信のリダイレクト - インバウンド(Redirecting Number IE Delivery - Inbound)]
番号 IE のリダイレクトをサポートするボイスメッセージ システムを統合する場合は、番号 IE のリダイレクトを使用します。
Cisco Unified Communications Manager に対する受信 SETUP メッセージの Redirecting Number IE を受理するには、このチェックボックスをオンにします。
Cisco Unified Communications Manager に対する受信 SETUP メッセージの Redirecting Number IE を除外するには、このチェックボックスをオフにします。
[ゲートキーパー情報(Gatekeeper Information)]
[ゲートキーパー名(Gatekeeper Name)]
ドロップダウン リスト ボックスから、ゲートキーパー制御の H.323 デバイス用のゲートキーパーを選択します。
(注) デバイスを選択しない場合、[E.164]、[テクノロジープレフィックス(Technology Prefix)]、および [ゾーン(Zone)] の各フィールドは無効になります。
(注) デバイスに複数の電話番号が設定されている場合、そのデバイスをゲートキーパー制御の電話機に変更することはできません。
[E.164]
ゲートキーパーに登録されている E.164 アドレスを選択します。
(注) H.323 クライアントがゲートキーパー制御のデバイスとして設定されていることを確認します。
(注) このフィールドには、ゲートキーパー制御の H.323 クライアント用の値を入力する必要があります。 このフィールドに入力できるのは、数字(0 ~ 9)と特殊文字の # および * だけです。
[テクノロジープレフィックス(Technology Prefix)]
テクノロジー プレフィックスを入力して、gw-type-prefix コマンドの設定時に各 Cisco Unified Communications Manager システムの IP アドレスを入力する必要がないようにします。 たとえば、ゲートキーパーで次の gw-type-prefix コマンドを使用できる場合、このフィールドには次のように 1#* と入力することができます。
gw-type-prefix 1#* default-technology
(注) このフィールドには、ゲートキーパー制御の H.323 クライアント用の値を入力する必要があります。 このフィールドに入力できるのは、数字(0 ~ 9)と特殊文字の # および * だけです。
[ゾーン(Zone)]
ゲートキーパーで、 Cisco Unified Communications Manager が登録を行う特定のゾーンを入力します。 ゾーンには、このゾーンと別のゾーンの間のコールに使用可能な合計帯域幅を指定します。
(注) このフィールドには、ゲートキーパー制御の電話機用の値を入力する必要があります。 このフィールドに入力できるのは、文字、数字、スペース、ダッシュ、ドット、およびアンダースコアだけです。
[ゲートキーパー制御のH.323クライアント(Gatekeeper Controlled H.323 Client)]
H.323 クライアント ゲートキーパーを制御対象のゲートキーパーとして設定する場合は、このチェックボックスをオンにします。
[サイレント(Do Not Disturb)](DND)
[サイレント(Do Not Disturb)]
DND を有効にする場合は、このチェックボックスをオンにします。
[DNDオプション(DND Option)]
ドロップダウン リスト ボックスで、次のいずれかの DND オプションを選択します。
[DND着信呼警告(DND Incoming Call Alert)]
ドロップダウン リスト ボックスから、次のオプションのいずれかを選択します。
[セキュアシェル情報(Secure Shell Information)]
[セキュアシェルユーザ(Secure Shell User)]
セキュア シェル ユーザのユーザ ID を入力します。 設定している電話機がセキュリティ保護されたシェルへのアクセスをサポートしていない場合、このフィールドは表示されません。 Cisco Technical Assistance Center(TAC)は、トラブルシューティングのためにセキュリティ保護されたシェルを使用します。 詳細については、TAC に問い合わせてください。
[セキュアシェルパスワード(Secure Shell Password)]
セキュア シェル ユーザのパスワードを入力します。 設定している電話機がセキュリティ保護されたシェルへのアクセスをサポートしていない場合、このフィールドは表示されません。 詳細については、TAC に問い合わせてください。
[プロダクト固有の設定(Product Specific Configuration)]
デバイスの製造元が定義するモデル固有の設定フィールド
プロダクト固有の設定では、デバイスの製造元によってモデル固有のフィールドが定義されています。 これらのフィールドは動的に設定されるため、予告なく変更される場合があります。
フィールドの説明とプロダクト固有の設定項目のヘルプを表示するには、 [プロダクト固有の設定(Product Specific Configuration)] 見出しの右側にある情報アイコン [?] をクリックして、ポップアップ ダイアログ ボックスでヘルプを表示します。
詳細な情報が必要な場合は、設定するデバイスの資料を参照するか、製造元にお問い合わせください。
BAT テンプレートの電話回線フィールドの説明
一部のデバイス タイプには、すべての電話機設定値を必要としないものもあります。 Cisco Unified Communications Manager の管理ページで設定された値を表示するだけのフィールドもあります。 BAT ユーザ インターフェイスのアスタリスクが付いているフィールドには、値を入力する必要があります。 アスタリスクの付いていないフィールドはオプションです。
表 2 BAT テンプレートに回線を追加する場合のフィールドの説明 フィールド
説明
[電話番号情報(Directory Number Information)]
[回線テンプレート名(Line Template Name)]
回線テンプレートの一意の名前を入力します。
このフィールドは、回線を追加する場合にのみ使用できます。既存の回線を更新する場合には使用できません。
[ルートパーティション(Route Partition)]
電話番号が属するルート パーティションを選択します。
(注) 電話番号は複数のパーティションに現れる可能性があります。
[説明(Description)]
回線テンプレートの説明を入力します。 説明には、任意の言語で最大 50 文字を指定できますが、二重引用符(")、パーセント記号(%)、アンパサンド(')、または山カッコ(<>)は使用できません。
[呼び出し表示(Alerting Name)]
共有電話番号に対するアラート中に表示される名前を表します。 非共有電話番号の場合、アラート時には [表示(Display)] フィールドに入力された名前が使用されます。
[ASCII呼び出し表示(Alerting Name ASCII)]
このフィールドには、[呼び出し表示(Alerting Name)] フィールドと同じ情報を指定します。ただし、入力は ASCII 文字に制限されます。 Unicode(国際化)文字をサポートしないデバイスでは、[ASCII呼び出し表示(Alerting Name ASCII)] フィールドの内容が表示されます。
[アクティブ(Active)]
このチェックボックスをオンにすると、この DN へのコールを自動転送できます(自動転送が設定されている場合)。 チェックボックスがオフの場合、DN は Cisco Unified Communications Manager で無視されます。
[電話番号の設定(Directory Number Settings)]
[ボイスメールプロファイル(Voice Mail Profile)]
パイロット番号をこの回線の電話番号と同じにするには、このパラメータを選択します。 この機能は、この電話機に対してボイスメッセージ サーバが設定されていない場合に役立ちます。
[コーリングサーチスペース(Calling Search Space)]
この電話番号から呼び出される番号を検索するパーティションを選択します。
(注) このフィールドに変更を加えると、[コールピックアップグループ(Call Pickup Group)] フィールドのリストに表示されるピックアップ グループ名が更新されます。 この設定値は、この電話番号を使用するすべてのデバイスに適用されます。
[プレゼンスグループ(Presence Group)]
プレゼンス機能で使用すると、電話番号がプレゼンス エンティティとして機能します。つまり、ウォッチャが電話番号のステータスを要求すると、電話番号のステータスがリアルタイムにデバイスに表示されます。
電話機によってプレゼンス エンティティのステータスを受信するには、ウォッチャのプレゼンス グループが、電話番号に適用されるプレゼンス グループのステータスを、[プレゼンスグループの設定(Presence Group Configuration)] ウィンドウに示されるとおりに表示するよう許可されていることを確認します。
プレゼンス機能については、『 Cisco Unified Communications Manager 機能およびサービス ガイド』を参照してください。
[ユーザ保留MOH音源(User Hold MOH Audio Source)]
ユーザが保留ボタンを押してコールを保留にするときに再生される保留音オーディオ ソースを選択します。
[ネットワーク保留MOH音源(Network Hold MOH Audio Source)]
システムがコールを保留にするとき(たとえば、ユーザがコールを転送する間や電話会議またはコール パークを開始する間)に再生される保留音オーディオ ソースを選択します。
[自動応答(Auto Answer)]
次のいずれかのオプションを選択して、この電話番号の自動応答機能をアクティブにします。
- [自動応答オフ(Auto Answer Off)](デフォルト)
- [ヘッドセットで自動応答(Auto Answer with Headset)]
- [スピーカフォンで自動応答(Auto Answer with Speakerphone)]
(注) [ヘッドセットで自動応答(Auto Answer with headset)] または [スピーカフォンで自動応答(Auto Answer with speakerphone)] を選択する場合、ヘッドセットまたはスピーカフォンが使用不可になっていないことを確認してください。
共有回線を持つデバイスに自動応答を設定しないでください。
[AAR設定(AAR Settings)]:この領域のフィールドの設定で、帯域幅が不十分なために宛先に到達できない場合のコールの処理方法を指定します。 自動代替ルーティング(AAR)は、AAR 接続先マスクまたはボイスメールにルーティングされるコールを処理します。
[AARボイスメール(AAR Voice Mail)]
このチェックボックスをオンにすると、[ボイスメールプロファイルの設定(Voice Mail Profile Configuration)] ウィンドウの設定が使用されます。
(注) このチェックボックスをオンにすると、Cisco Unified Communications Manager では、[カバレッジ(Coverage)] または [接続先(Destination)] ボックスと [コーリングサーチスペース(Calling Search Space)] の設定値を無視します。
[AAR接続先マスク(AAR Destination Mask)]
外部電話番号マスクを使用するのではなく、この設定を使用して、ダイヤルする AAR 接続先を判定します。
[AAR CSS]
自動代替ルーティング(AAR)の実行時にデバイスが使用するコーリング サーチ スペースを選択します。 AAR コーリング サーチ スペースは、帯域幅不足によってコールがブロックされないように、収集された(発信)番号のルーティング方法を決定するために検索されるルート パーティションの集合を指定します。
[AARグループ(AAR Group)]
このデバイスの自動代替ルーティング(AAR)グループを選択します。 AAR グループは、帯域幅不足のためにコールがブロックされないように、コールをルーティングするためのプレフィックス番号を提供します。
AAR グループを [<なし(None)>] に設定すると、ブロックされたコールの再ルーティングは行われません。
[この接続先を不在転送履歴に保持する(Retain this destination in the call forwarding history)]
このチェックボックスをオンにすると、コールの AAR レッグが通話履歴に表示されるようになります。
[視覚的なメッセージ受信インジケータのポリシー(Visual Message Waiting Indicator Policy)]
このフィールドを使用してハンドセット ランプ照明ポリシーを設定します。 次のいずれかのオプションを選択します。
- [システムポリシーの使用(Use System Policy)](電話番号はサービス パラメータの「メッセージ受信ランプポリシー(Message Waiting Lamp Policy)」設定を参照します)
- [ライトとプロンプト(Light and Prompt)]
- [プロンプトのみ(Prompt Only)]
- [ライトのみ(Light Only)]
- [なし(None)]
設定は、[共有デバイス設定の更新(Update Shared Device Settings)] チェックボックスをオンにして [選択対象を反映(Propagate Selected)] ボタンをクリックしない限り、現在のデバイスだけに適用されます (チェックボックスが表示されるのは、他のデバイスがこの電話番号を共有している場合だけです)。
[オーディオメッセージ受信インジケータのポリシー(Audible Message Waiting Indicator Policy)]
このフィールドを使用して、オーディオ メッセージ受信インジケータのポリシーを設定します。 次のいずれかのオプションを選択します。
[コールピックアップグループオーディオアラートの設定(電話がアイドルのとき)(Call Pickup Group Audio Alert Setting (Phone Idle))]
このフィールドで、着信コールがコール ピックアップ グループのメンバーに送信する通知のタイプが判定されます。 コールが着信した電話機で応答されない場合、コール ピックアップ グループ内のアイドルの電話機で短い呼び出し音が聞こえるか([一度鳴らす(ring once)])、または何も聞こえません([無効(disabled)])。
[コールピックアップグループオーディオアラートの設定(電話がアクティブのとき)(Call Pickup Group Audio Alert Setting (Phone Active))]
このフィールドで、着信コールがコール ピックアップ グループのメンバーに送信する通知のタイプが判定されます。 コールが着信した電話機で応答されない場合、コール ピックアップ グループ内で使用中の電話機でビープ音のみが聞こえるか、または何も聞こえません(無効)。
[録音オプション(Recording Option)]
このフィールドで、エージェントのライン アピアランスでの録音オプションが決定されます。 デフォルトでは、録音オプションは [コール録音を無効(Call Recording Disabled)] です。
次のいずれかのオプションを選択します。
- [コール録音を無効(Call Recording Disabled)]:エージェントがライン アピアランスで発信したコールは録音されません。
- [自動コール録音を有効(Automatic Call Recording Enabled)]:エージェントがライン アピアランスで発信したコールが自動的に録音されます。
- [アプリケーションから呼び出されたコール録音を有効(Application Invoked Call Recording Enabled)]:アプリケーションがコール録音を呼び出した場合に、エージェントがライン アピアランスで発信したコールが録音されます。
録音オプションが [自動コール録音を有効(Automatic Call Recording Enabled)] または [アプリケーションから呼び出されたコール録音を有効(Application Invoked Call Recording Enabled)] のいずれかに設定されている場合、ライン アピアランスを録音プロファイルに関連付けることができます。
自動録音が有効な場合、アプリケーションからの録音要求は拒否されます。
[録音プロファイル(Recording Profile)]
このフィールドで、エージェントのライン アピアランスでの録音プロファイルが決定されます。
[モニタリング用コーリングサーチスペース(Monitoring Calling Search Space)]
スーパーバイザのライン アピアランスのモニタリング用コーリング サーチ スペースに、エージェントの回線またはデバイス パーティションを含めてエージェントをモニタできるようにします。
スーパーバイザのライン アピアランス ウィンドウでモニタリング用コーリング サーチ スペースを設定します。 ドロップダウン リスト ボックスから既存のコーリング サーチ スペースを選択します。
デフォルト値は [なし(None)] です。
[コール転送とコールピックアップの設定(Call Forward and Call Pickup Settings)]
[不在時ボイスメール転送(Forward All Voice Mail)]
コールをボイスメール プロファイルで選択した番号に自動転送する場合は、このチェックボックスをオンにします。
このチェックボックスをオンにすると、[不在転送の接続先(Forward All Destination)] フィールドと [不在転送コーリングサーチスペース(Forward All Calling Search Space)] チェックボックスでの指定内容は無効になります。
[不在転送の接続先(Forward All Destination)]
すべてのコールが自動転送される先の電話番号またはディレクトリ URI を入力します。
(注) この設定値は、ダイヤル可能な任意の電話番号(制限されていない限り、外部の宛先を含む)、およびこの電話番号を使用するすべてのデバイスに適用されます。
[不在転送コーリングサーチスペース(Forward All Calling Search Space)]
コールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを選択します。
(注) この設定値は、この電話番号を使用するすべてのデバイスに適用されます。
[不在転送のセカンダリコーリングサーチスペース(Secondary Calling Search Space for Forward All)]
ドロップダウン リスト ボックスからセカンダリ コーリング サーチ スペース(CSS)を選択します。
自動転送は回線ごとの機能なので、デバイスのコーリング サーチ スペースが不明な場合は、回線のコーリング サーチ スペースを使用してコールが自動転送されます。 回線のコーリング サーチ スペースが制限的またはルーティング不能な場合、自動転送の試行が失敗します。
不在転送のセカンダリ コーリング サーチ スペースを追加すると、転送のためのソリューションとなります。 不在転送のプライマリ コーリング サーチ スペースと、不在転送のセカンダリ コーリング サーチ スペースは、不在転送を処理するときに連結されます(プライマリ CFA CSS + セカンダリ CFA CSS)。 Cisco Unified Communications Manager は、この組み合わせを使用して、CFA の宛先を検証し、コールを転送します。
[話中ボイスメール転送(内部)(Forward Busy Internal Voice Mail)]
内部番号からのコールをボイスメール プロファイルで選択した番号に自動転送する場合は、このチェックボックスをオンにします。
このチェックボックスをオンにすると、[話中転送の接続先(内部)(Forward Busy Internal Destination)] フィールドと [話中転送コーリングサーチスペース(内部)(Forward Busy Internal Calling Search Space)] チェックボックスでの指定内容は無効になります。
[話中転送の接続先(内部)(Forward Busy Internal Destination)]
回線が使用中のときに内線コールが自動転送される先の電話番号またはディレクトリ URI を入力します。
(注) この設定値は、ダイヤル可能な任意の内部電話番号、およびこの電話番号を使用するすべてのデバイスに適用されます。
[話中転送コーリングサーチスペース(内部)(Forward Busy Internal Calling Search Space)]
内線コールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを選択します。
(注) この設定値は、この電話番号を使用するすべてのデバイスに適用されます。
[話中ボイスメール転送(外部)(Forward Busy External Voice Mail)]
外部番号からのコールをボイスメール プロファイルで選択した番号に自動転送する場合は、このチェックボックスをオンにします。
このチェックボックスをオンにすると、[話中転送の接続先(外部)(Forward Busy External Destination)] フィールドと [話中転送コーリングサーチスペース(外部)(Foward Busy External Calling Search Space)] チェックボックスでの指定内容は無効になります。
[話中転送の接続先(外部)(Forward Busy External Destination)]
回線が使用中のときに外線コールが自動転送される先の電話番号またはディレクトリ URI を入力します。
(注) この設定値は、ダイヤル可能な任意の外部電話番号(制限されていない限り、外部の宛先を含む)、およびこの電話番号を使用するすべてのデバイスに適用されます。
[話中転送コーリングサーチスペース(外部)(Forward Busy External Calling Search Space)]
外線コールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを選択します。
(注) この設定値は、この電話番号を使用するすべてのデバイスに適用されます。
[無応答時ボイスメール転送(内部)(Forward No Answer Internal Voice Mail)]
内部番号からのコールをボイスメール プロファイルで選択した番号に自動転送する場合は、このチェックボックスをオンにします。
このチェックボックスをオンにすると、[無応答時転送の接続先(内部)(Forward No Answer Internal Destination)] フィールドと [無応答時転送コーリングサーチスペース(内部)(Forward No Answer Internal Calling Search Space)] チェックボックスでの指定内容は無効になります。
[無応答時転送の接続先(内部)(Forward No Answer Internal Destination)]
電話機が応答しない場合に、内線コールが自動転送される先の電話番号またはディレクトリ URI を入力します。
(注) この設定値は、ダイヤル可能な任意の内部電話番号、およびこの電話番号を使用するすべてのデバイスに適用されます。
[無応答時転送コーリングサーチスペース(内部)(Forward No Answer Internal Calling Search Space)]
内線コールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを選択します。 この設定値は、システム内で設定されている場合だけ、表示されます。
(注) この設定値は、この電話番号を使用するすべてのデバイスに適用されます。
[無応答時ボイスメール転送(外部)(Forward No Answer External Voice Mail)]
コールをボイスメール プロファイルで選択した外部番号に自動転送する場合は、このチェックボックスをオンにします。
このチェックボックスをオンにすると、[無応答時転送の接続先(外部)(Forward No Answer External Destination)] フィールドと [無応答時転送コーリングサーチスペース(外部)(Forward No Answer External Calling Search Space)] チェックボックスでの指定内容は無効になります。
[無応答時転送の接続先(外部)(Forward No Answer External Destination)]
電話機が応答しない場合に、外線コールが自動転送される先の電話番号またはディレクトリ URI を入力します。
(注) この設定値は、ダイヤル可能な任意の外部電話番号(制限されていない限り、外部の宛先を含む)、およびこの電話番号を使用するすべてのデバイスに適用されます。
[無応答時転送コーリングサーチスペース(外部)(Forward No Answer External Calling Search Space)]
外線コールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを選択します。 この設定値は、システム内で設定されている場合だけ、表示されます。
(注) この設定値は、この電話番号を使用するすべてのデバイスに適用されます。
[カバレッジなし時ボイスメール転送(内部)(Forward No Coverage Internal Voice Mail)]
内部番号からのコールをボイスメール プロファイルで選択した番号に自動転送する場合は、このチェックボックスをオンにします。
このチェックボックスをオンにすると、[無応答時転送の接続先(Forward No Answer Destination)] フィールドと [無応答時転送コーリングサーチスペース(Forward No Answer Calling Search Space)] チェックボックスでの指定内容は無効になります。
[カバレッジなし時転送の接続先(内部)(Forward No Coverage Internal Destination)]
電話機のカバレッジが対応しない場合に、内線コールが自動転送される先の電話番号またはディレクトリ URI を入力します。
(注) この設定値は、ダイヤル可能な任意の内部電話番号、およびこの電話番号を使用するすべてのデバイスに適用されます。
[カバレッジなし時転送コーリングサーチスペース(内部)(Forward No Coverage Internal Calling Search Space)]
内線コールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを選択します。 この設定値は、システム内で設定されている場合だけ、表示されます。
(注) この設定値は、この電話番号を使用するすべてのデバイスに適用されます。
[カバレッジなし時ボイスメール転送(外部)(Forward No Coverage External Voice Mail)]
外部番号からのコールをボイスメール プロファイルで選択した番号に自動転送する場合は、このチェックボックスをオンにします。
このチェックボックスをオンにすると、[無応答時転送の接続先(Forward No Answer Destination)] フィールドと [無応答時転送コーリングサーチスペース(Forward No Answer Calling Search Space)] チェックボックスでの指定内容は無効になります。
[カバレッジなし時転送の接続先(外部)(Forward No Coverage External Destination)]
電話機のカバレッジが対応しない場合に、外線コールが自動転送される先の電話番号またはディレクトリ URI を入力します。
(注) この設定値は、ダイヤル可能な任意の電話番号(制限されていない限り、外部の宛先を含む)、およびこの電話番号を使用するすべてのデバイスに適用されます。
[カバレッジなし時転送コーリングサーチスペース(外部)(Forward No Coverage External Calling Search Space)]
外線コールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを選択します。 この設定値は、システム内で設定されている場合だけ、表示されます。
(注) この設定値は、この電話番号を使用するすべてのデバイスに適用されます。
[CTI障害時ボイスメール転送(Forward on CTI Failure Voice Mail)]
[CTI障害時転送(Forward on CTI Failure)] フィールドは、CTI ルート ポイントおよび CTI ポートのみに適用されます。 この行の設定は、CTI ルート ポイントまたは CTI ポートが失敗した場合に、この CTI ルート ポイントまたは CTI ポートへの外線コールの自動転送をどのように扱うかを指定します。
このチェックボックスをオンにすると、[ボイスメールプロファイルの設定(Voice Mail Profile Configuration)] ウィンドウの設定が使用されます。
このチェックボックスをオンにすると、 Cisco Unified Communications Manager は、[接続先(Destination)] ボックスと [コーリングサーチスペース(Calling Search Space)] の設定値を無視します。 内線コールでこのチェックボックスをオンにすると、外線コールの [ボイスメール(Voice Mail)] チェックボックスが自動的にオンになります。 外線コールをボイスメッセージ システムに自動転送しない場合、外線コールの [ボイスメール(Voice Mail)] チェックボックスをオフにする必要があります。
[CTI障害時転送の接続先(Forward on CTI Failure Destination)]
この設定は、電話番号を制御するアプリケーションが失敗した場合に、接続されなかった内線コールが自動転送される電話番号またはディレクトリ URI を指定します。 外部の電話番号を含め、ダイヤル可能な任意の電話番号を使用します。
内線コールの宛先の値を入力すると、外線コールの [接続先(Destination)] フィールドにこの値が自動的にコピーされます。 外線コールを別の宛先に自動転送する場合は、外線コールの [接続先(Destination)] フィールドに別の値を入力する必要があります。
[CTI障害時転送のコーリングサーチスペース(Forward on CTI Failure Calling Search Space)]
この設定値は、この電話番号を使用するすべてのデバイスに適用されます。
内線コールの CSS を選択すると、外線コールの CSS 設定にこの値が自動的にコピーされます。 外線コールを別のコーリング サーチ スペースに自動転送する場合は、外線コールの CSS に別の設定値を選択する必要があります。
[無応答時の呼び出し時間(No Answer Ring Duration)]
コールが呼び出し音を送り、応答を待つ時間(秒数)を入力します。この時間内に応答がないと、無応答時の転送着信先にコールを自動転送します。
[コールピックアップグループ(Call Pickup Group)]
コール ピックアップ グループ名を選択してコール ピックアップ グループを指定します。コール ピックアップ グループでは、該当のピックアップ グループ番号をダイヤルすることにより、この電話番号への着信コールに応答することができます。
[パークモニタリング(Park Monitoring)]
[パークモニタリング転送非取得時の接続先(外部)(Park Monitoring Forward No Retrieve Destination External)]
パークされている側が外部の場合、パークしたユーザの [パークモニタリング転送非取得時の接続先(外部)(Park Monitoring Forward No Retrieve Destination External)] パラメータに指定された接続先にコールが転送されます。 [パークモニタリング転送非取得時の接続先(外部)(Park Monitoring Forward No Retrieve Destination External)] フィールドの値が空の場合、パークされた側のコールはパークしたユーザの回線にリダイレクトされます。
[パークモニタリング転送非取得時の接続先(内部)(Park Monitoring Forward No Retrieve Destination Internal)]
パークされている側が内部の場合、パークしたユーザの [パークモニタリング転送非取得時の接続先(内部)(Park Monitoring Forward No Retrieve Destination Internal)] パラメータに指定された接続先にコールが転送されます。 [パークモニタリング転送非取得時の接続先(内部)(Park Monitoring Forward No Retrieve Destination Internal)] フィールドの値が空の場合、パークされた側のコールはパークしたユーザの回線にリダイレクトされます。
[パークモニタリング復帰タイマー(Park Monitoring Reversion Timer)]
このパラメータは、ユーザがパークしたコールを取得するようにユーザに求めるまで、Cisco Unified Communications Manager が待機する秒数を決定します。 このタイマーはユーザが電話の [パーク] ソフトキーを押すと起動し、タイマーの期限が切れるとリマインダが発行されます。
デフォルト:60 秒
(注) ゼロ以外の値を設定すると、[サービスパラメータ(Service Parameters)] ウィンドウに設定されているパラメータの値がこの値で上書きされます。 一方、ここに 0 を設定すると、[サービスパラメータ(Service Parameters)] ウィンドウの値が使用されます。
[未取得時のパークモニタリング転送:内線ボイスメール(Park Monitoring Forward No Retrieve Internal Voice Mail)]
このチェックボックスをオンにすると、[ボイスメールプロファイルの設定(Voice Mail Profile Configuration)] ウィンドウの設定が使用されます。
(注) このチェックボックスをオンにすると、Cisco Unified Communications Manager は、[接続先(Destination)] ボックスと [コーリングサーチスペース(Calling Search Space)] の設定値を無視します。
[パークモニタリング転送の接続先非取得時のボイスメール(外部)(Park Monitoring Forward No Retrieve Destination External Voice Mail)]
このチェックボックスをオンにすると、[ボイスメールプロファイルの設定(Voice Mail Profile Configuration)] ウィンドウの設定が使用されます。
(注) このチェックボックスをオンにすると、Cisco Unified Communications Manager は、[接続先(Destination)] ボックスと [コーリングサーチスペース(Calling Search Space)] の設定値を無視します。
[パークモニタリング転送非取得時のCSS(外部)(Park Monitoring Forward No Retrieve External CSS)]
電話番号に適用するコーリング サーチ スペースを選択します。
[パークモニタリング転送非取得時のCSS(内部)(Park Monitoring Forward No Retrieve Internal CSS)]
電話番号に適用するコーリング サーチ スペースを選択します。
[未登録内線ボイスメールの不在転送(Forward Unregistered Internal Voice Mail)]
このフィールドは未登録の内部 DN コールに適用されます。 コールは指定された宛先番号またはボイスメールに再ルーティングされます。
未登録の内部番号からのコールをボイスメール プロファイルで選択した番号に自動転送する場合は、このチェックボックスをオンにします。
このチェックボックスをオンにすると、[未登録内線の不在転送接続先(Forward Unregistered Internal Destination)] フィールドと [未登録内線の不在転送コーリングサーチスペース(Forward Unregistered Internal Calling Search Space)] ドロップダウン リスト ボックスでの指定内容は無効になります。
[未登録内線の不在転送接続先(Forward Unregistered Internal Destination)]
回線が使用中のときに未登録の内線コールが自動転送される先の電話番号を入力します。
この設定値は、ダイヤル可能な任意の内部電話番号、およびこの電話番号を使用するすべてのデバイスに適用されます。
[未登録内線の不在転送CSS(Forward Unregistered Internal CSS)]
未登録の内線コールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを選択します。
この設定値は、この電話番号を使用するすべてのデバイスに適用されます。
[未登録外線ボイスメールの不在転送(Forward Unregistered External Voice Mail)]
このフィールドは未登録の外部 DN コールに適用されます。 コールは指定された宛先番号またはボイスメールに再ルーティングされます。
(注) [サービスパラメータ設定(Service Parameter Configuration)] ウィンドウで、電話番号に対して許可される最大自動転送数を指定する必要があります。
[未登録外線の不在転送接続先(Forward Unregistered External Destination)]
回線が使用中のときに外線コールが自動転送される先の電話番号を入力します。
この設定値は、ダイヤル可能な任意の外部電話番号(制限されていない限り、外部の宛先を含む)、およびこの電話番号を使用するすべてのデバイスに適用されます。
[未登録外線の不在転送CSS(Forward Unregistered External CSS)]
外線コールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを選択します。
この設定値は、この電話番号を使用するすべてのデバイスに適用されます。
[MLPP代替パーティの設定(Multilevel Precedence and Preemption Alternate Party Settings)]
[転送先(接続先)(Target (Destination))]
この電話番号が優先コールを受信したが、その番号もその自動転送先もその優先コールに応答しない場合に、MLPP 優先コールが向けられる先の番号を入力します。
この値には、数字、シャープ(#)、およびアスタリスク(*)を含めることができます。
[MLPPコーリングサーチスペース(MLPP Calling Search Space)]
ドロップダウン リスト ボックスから、代替パーティ ターゲット(宛先)番号に関連付けるコーリング サーチ スペースを選択します。
[MLPP無応答時の呼び出し時間(秒)(MLPP No Answer Ring Duration (Seconds))]
優先コールに対してこの電話番号とその自動転送先が応答するのを待つ時間(4 ~ 30 秒)を入力します。この時間内に応答がないと、MLPP 優先コールはこの電話番号の代替パーティに向けて送られます。
Cisco Unified Communications Manager エンタープライズ パラメータの Precedence Alternate Party Timeout で設定されている値を使用する場合は、この設定をブランクのままにします。
[この電話の回線設定(Line Settings for This Phone)]
[表示(内線発信者ID)(Display (Internal Caller ID))]
このフィールドは、ライン アピアランスに電話番号を表示しない場合だけ使用します。 回線と電話機の組み合わせに使用されているこの電話番号を識別するためのテキストを入力します。
推奨される入力値としては、上司の名前、部門名、あるいは複数の電話番号を受け持つ秘書またはアシスタントが複数の電話番号を識別できる別の適切な情報が挙げられます。
[ASCII表示(内線発信者ID)(ASCII Display (Internal Caller ID))]
このフィールドには、[表示(内線発信者ID)(Display (Internal Caller ID))] フィールドと同じ情報を指定します。ただし、入力は ASCII 文字に制限されます。 Unicode(国際化)文字をサポートしないデバイスでは、[ASCII表示(内線発信者ID)(ASCII Display (Internal Caller ID))] フィールドの内容が表示されます。
設定は、右にあるチェックボックス([共有デバイス設定の更新(Update Shared Device Settings)])をオンにして [選択対象を反映(Propagate Selected)] ボタンをクリックしない限り、現在のデバイスだけに適用されます (右側のチェックボックスが表示されるのは、他のデバイスがこの電話番号を共有している場合だけです)。
[回線のテキストラベル(Line Text Label)]
回線と電話機の組み合わせに使用されているこの電話番号を識別するためのテキストを入力します。
(注) デフォルトの言語は英語です。
[外線電話番号マスク(External Phone Number Mask)]
この回線からコールを行うときに発信者 ID 用に送信される電話番号(またはマスク)を入力します。
最大 24 桁の数字と文字「X」を入力できます。 X は電話番号を表し、パターンの最後に配置する必要があります。 たとえば、972813XXXX というマスクを指定すると、内線 1234 からの外線コールには発信者 ID 番号 9728131234 が表示されます。
[視覚的なメッセージ受信インジケータのポリシー(Visual Message Waiting Indicator Policy)]
このフィールドを使用してハンドセット ランプ照明ポリシーを設定します。 次のいずれかのオプションを選択します。
- [システムポリシーの使用(Use System Policy)](電話番号はサービス パラメータの「メッセージ受信ランプポリシー(Message Waiting Lamp Policy)」設定を参照します)
- [ライトとプロンプト(Light and Prompt)]
- [プロンプトのみ(Prompt Only)]
- [ライトのみ(Light Only)]
- [なし(None)]
設定は、[共有デバイス設定の更新(Update Shared Device Settings)] チェックボックスをオンにして [選択対象を反映(Propagate Selected)] ボタンをクリックしない限り、現在のデバイスだけに適用されます (チェックボックスが表示されるのは、他のデバイスがこの電話番号を共有している場合だけです)。
[オーディオメッセージ受信インジケータのポリシー(Audible Message Waiting Indicator Policy)]
このフィールドを使用して、オーディオ メッセージ受信インジケータのポリシーを設定します。 次のいずれかのオプションを選択します。
[呼出音設定(電話がアイドルのとき)(Ring Setting (Phone Idle))]
着信コールを受信し、デバイスに他のアクティブなコールがない場合の、ライン アピアランスに対する呼び出し音設定を選択します。 次のいずれかのオプションを選択します。
[呼出音設定(電話がアクティブのとき)(Ring Setting (Phone Active))]
この電話機に異なる回線で別のアクティブ コールがあった場合に使用される呼び出し音設定を選択します。 次のいずれかのオプションを選択します。
[コールピックアップグループオーディオアラートの設定(電話がアイドルのとき)(Call Pickup Group Audio Alert Setting (Phone Idle))]
このフィールドで、着信コールがコール ピックアップ グループのメンバーに送信する通知のタイプが判定されます。 コールが着信した電話機で応答されない場合、コール ピックアップ グループ内のアイドルの電話機で短い呼び出し音が聞こえるか([一度鳴らす(ring once)])、または何も聞こえません([無効(disabled)])。
[コールピックアップグループオーディオアラートの設定(電話がアクティブのとき)(Call Pickup Group Audio Alert Setting (Phone Active))]
このフィールドで、着信コールがコール ピックアップ グループのメンバーに送信する通知のタイプが判定されます。 コールが着信した電話機で応答されない場合、コール ピックアップ グループ内で使用中の電話機でビープ音のみが聞こえるか、または何も聞こえません(無効)。
[録音オプション(Recording Option)]
このフィールドで、エージェントのライン アピアランスでの録音オプションが決定されます。 デフォルトでは、録音オプションは [コール録音を無効(Call Recording Disabled)] です。
次のいずれかのオプションを選択します。
- [コール録音を無効(Call Recording Disabled)]:エージェントがライン アピアランスで発信したコールは録音されません。
- [自動コール録音を有効(Automatic Call Recording Enabled)]:エージェントがライン アピアランスで発信したコールが自動的に録音されます。
- [アプリケーションから呼び出されたコール録音を有効(Application Invoked Call Recording Enabled)]:アプリケーションがコール録音を呼び出した場合に、エージェントがライン アピアランスで発信したコールが録音されます。
録音オプションが [自動コール録音を有効(Automatic Call Recording Enabled)] または [アプリケーションから呼び出されたコール録音を有効(Application Invoked Call Recording Enabled)] のいずれかに設定されている場合、ライン アピアランスを録音プロファイルに関連付けることができます。
自動録音が有効な場合、アプリケーションからの録音要求は拒否されます。
[録音プロファイル(Recording Profile)]
このフィールドで、エージェントのライン アピアランスでの録音プロファイルが決定されます。 ドロップダウン リスト ボックスから既存の録音プロファイルを選択します。 録音プロファイルを作成するには、
メニュー オプションを使用します。デフォルト値は [なし(None)] です。
[モニタリング用コーリングサーチスペース(Monitoring Calling Search Space)]
スーパーバイザのライン アピアランスのモニタリング用コーリング サーチ スペースに、エージェントの回線またはデバイス パーティションを含めてエージェントをモニタできるようにします。
スーパーバイザのライン アピアランス ウィンドウでモニタリング用コーリング サーチ スペースを設定します。 ドロップダウン リスト ボックスから既存のコーリング サーチ スペースを選択します。
デフォルト値は [なし(None)] です。
[不在着信のログを取る(Log Missed Calls)]
このチェックボックスを使用すると、不在着信のログ機能をオンまたはオフにできます。 このチェックボックスにチェックマークが表示されている(オンになっている)場合(デフォルトの設定)、 Cisco Unified Communications Manager は電話機でのその電話番号に対する通話履歴に不在着信のログを記録します。
[不在転送CSSアクティベーションポリシー(Forward All CSS Activation Policy)]
ドロップダウン リスト ボックスから次のオプションのいずれかを選択します。
- [システムデフォルトの使用(Use System Default)]
- [設定済みCSSを使用(With Configured CSS)]
- [アクティブなデバイス/回線CSSを使用(With Activating Device/Line CSS)]
[設定済みCSSを使用(With Configured CSS)] オプションを選択した場合、[電話番号の設定(Directory Number Configuration)] ウィンドウで明示的に設定された [不在転送コーリングサーチスペース(Forward All Calling Search Space)] で、不在転送のアクティブ化と自動転送を制御します。 [不在転送コーリングサーチスペース(Forward All Calling Search Space)] が [なし(None)] に設定されている場合、CSS は不在転送のために設定されません。 パーティションが設定された任意の電話番号への不在転送をアクティブにすることはできません。 不在転送がアクティブになっているとき、不在転送コーリング サーチ スペースと不在転送のセカンダリ コーリング サーチ スペースは変更されません。
電話番号のコーリング サーチ スペースとデバイスのコーリング サーチ スペースを組み合わせて利用する場合、[コーリングサーチスペースのアクティベーションポリシー(Calling Search Space Activation Policy)] で [アクティブなデバイス/回線CSSを使用(With Activating Device/Line CSS)] を選択します。 このオプションを使用すると、不在転送が電話機からアクティブにされている場合、[不在転送コーリングサーチスペース(Forward All Calling Search Space)] と [不在転送のセカンダリコーリングサーチスペース(Secondary Calling Search Space for Forward All)] は、電話番号のコーリング サーチ スペースとアクティブになっているデバイスのコーリング サーチ スペースで自動的に実装されます。
[保留復帰の呼び出し時間(秒)(Hold Reversion Ring Duration (seconds))]
0 ~ 1200 の数値(両端の値も含む)を入力して、保留している電話機に戻されるコールのアラートを送信するまでの待機時間(秒)を指定します。
0 を入力すると、 Cisco Unified Communications Manager では、保留したコールを復帰する機能は呼び出されません。
[保留復帰の通知間隔(秒)(Hold Reversion Notification Interval (seconds))]
0 ~ 1200 の数値(両端の値も含む)を入力して、保留している電話機にリマインダ アラートを送信する間隔(秒)を指定します。
0 を入力すると、 Cisco Unified Communications Manager では、リマインダ アラートは送信されません。
[パーティ参加トーン(Party Entrance Tone)]
ドロップダウン リスト ボックスから、次のオプションのいずれかを選択します。
- [デフォルト(Default)]:Party Entrance Tone サービス パラメータに設定された値を使用します。
- [オン(On)]:基本コールがマルチパーティ コール(割り込みコール、C 割り込みコール、アドホック会議、ミートミー会議、または参加コール)に変わると、電話機でトーンが再生されます。 さらに、通話者がマルチパーティ コールを離れると、別のトーンが再生されます。 制御デバイス、つまりマルチパーティ コールの発信元がビルトイン ブリッジの場合、制御デバイスで [オン(On)] を選択すると、すべての通話者に対してトーンが再生されます。 制御デバイス(たとえば、会議の開催者)がコールに参加しなくなっている場合、または制御デバイスがトーンを再生できない場合は、[オン(On)] が選択されていても、Cisco Unified Communications Manager はトーンを再生しません。
- [オフ(Off)]:基本コールがマルチパーティ コールに変わっても、電話機でトーンは再生されません。
[複数コール/コール待機設定(Multiple Call/Call Waiting Settings)]
[コール最大数(Maximum Number of Calls)]
クラスタ内のデバイスの 1 つの回線に対して最大 184 のコールを設定できます。ただし、デバイスが制限要因となります。 1 つの回線に対してコールの数を設定すると、別の回線に使用可能なコールが減少します。
デフォルトは 4 です。 電話機が回線ごとの複数コールを許可していない場合、デフォルトは 2 です。
CTI ルート ポイントに対しては、各ポートに対して最大 10,000 のコールを設定できます。 デフォルトは 5000 コールです。
このフィールドは [ビジートリガー(Busy Trigger)] フィールドと併せて使用します。
[ビジートリガー(Busy Trigger)]
この設定は、[コール最大数(Maximum Number of Calls)] および [話中転送(Call Forward Busy)] と連動し、回線で表示されるコールの最大数を決定します。 [コール最大数(Maximum Number of Calls)] が 50 に設定され、[ビジートリガー(Busy Trigger)] が 40 に設定されている場合、着信コール 41 は話し中を理由として拒否されます(さらに [話中転送(Call Forward Busy)] が設定されている場合は転送されます)。 この回線が共有されている場合は、すべての回線が話し中になって、初めて着信コールが拒否されることに注意してください。
このフィールドは、CTI ルート ポイント用の [コール最大数(Maximum Number of Calls)] と併せて使用します。 デフォルトは 4500 コールです。
[このデバイスにおける転送呼の情報表示(Forwarded Call Information Display for This Device)]
[発信者名(Caller Name)]
自動転送されたコールの受信時に、表示に発信者名を含めるには、このチェックボックスをオンにします。 デフォルトでは、このチェックボックスはオンになっています。
[発信者番号(Caller Number)]
自動転送されたコールの受信時に、表示に発信者番号を含めるには、このチェックボックスをオンにします。
[転送元番号(Redirected Number)]
自動転送されたコールの受信時に、表示にリダイレクトされた番号を含めるには、このチェックボックスをオンにします。
[ダイヤル番号(Dialed Number)]
自動転送されたコールの受信時に、表示にダイヤルされた番号を含めるには、このチェックボックスをオンにします。 デフォルトの設定では、このチェックボックスはオンになっています。
[ディレクトリURI(Directory URI)] フィールド
[電話番号のURI(1-5)(URI (1-5) on Directory Number)]
この電話機の電話番号に関連付けるディレクトリ URI を入力します。 「username@host」形式で入力してください。 最大で 47 文字の英数字によるユーザ名を入力します。 ホスト アドレスとして、IPv4 アドレスまたは完全修飾ドメイン名を入力します。 1 つの電話番号に最大 5 つのディレクトリ URI を関連付けることができます。
(注) Cisco Unified CM の管理ページ内では、二重引用符またはカンマが組み込まれたディレクトリ URI を入力できます。 ただし、一括管理を使用して、二重引用符またはカンマが組み込まれたディレクトリ URI を含む CSV ファイルをインポートする場合は、ディレクトリ URI 全体を二重引用符で囲むとともに、組み込まれている二重引用符の前に二重引用符を置いてエスケープ処理する必要があります。 たとえば、「Jared, "Jerry",Smith@test.com」というディレクトリ URI は、CSV ファイルでは「"Jared,""Jerry"",Smith@test.com"」と入力する必要があります。 [電話番号のURI(1-5)ルートパーティション(URI (1-5) Route Partition on Directory Number)]
ディレクトリ URI が属するパーティションを入力します。 ディレクトリ URI へのアクセスを制限しない場合は、フィールドを空白のままにします。
[電話番号ではURI(1-5)がプライマリ(URI (1-5) Is Primary on Directory Number)]
このディレクトリ URI がこの内線のプライマリ ディレクトリ URI であることを示すには、「t」(True)と入力します。 逆に、このディレクトリ URI がこの内線のプライマリ ディレクトリ URI ではないことを示すには、「f」(False)と入力します。
(注) 1 つの電話番号に最大 5 つのディレクトリ URI を関連付けることができますが、1 つのプライマリ ディレクトリ URI を選択する必要があります。
インターコム テンプレートを追加するための BAT テンプレートのフィールドの説明
次の表で、インターコム テンプレートを BAT 電話機、ゲートウェイ、または UDP テンプレートに追加する場合に表示されるフィールドすべてについて説明します。 一部のデバイス タイプには、すべての電話機設定値を必要としないものもあります。 Cisco Unified Communications Manager の管理ページで設定された値を表示するだけのフィールドもあります。 BAT ユーザ インターフェイスのアスタリスクが付いているフィールドには、値を入力する必要があります。 アスタリスクの付いていないフィールドはオプションです。
表 3 BAT テンプレートにインターコム テンプレートを追加する場合のフィールドの説明 フィールド
説明
[インターコム電話番号情報(Intercom Directory Number Information)]
[インターコムテンプレート名(Intercom Template Name)]
インターコム テンプレートの一意の名前を入力します。
[ルートパーティション(Route Partition)]
電話番号が属するルート パーティションを選択します。
(注) 電話番号は複数のパーティションに現れる可能性があります。
[説明(Description)]
電話番号およびルート パーティションの説明を入力します。 説明には、任意の言語で最大 50 文字を指定できますが、二重引用符("")、パーセント記号(%)、アンパサンド(')、または山カッコ(<>)は使用できません。
[表示(内線発信者ID)(Display (Internal Caller ID))]
このフィールドは、ライン アピアランスに電話番号を表示しない場合だけ使用します。 回線と電話機の組み合わせに使用されているこの電話番号を識別するためのテキストを入力します。
推奨される入力値としては、上司の名前、部門名、あるいは複数の電話番号を受け持つ秘書またはアシスタントが複数の電話番号を識別できる別の適切な情報が挙げられます。
[ASCII表示(内線発信者ID)(ASCII Display (Internal Caller ID))]
このフィールドには、[表示(内線発信者ID)(Display (Internal Caller ID))] フィールドと同じ情報を指定します。ただし、入力は ASCII 文字に制限されます。 Unicode(国際化)文字をサポートしないデバイスでは、[ASCII表示(内線発信者ID)(ASCII Display (Internal Caller ID))] フィールドの内容が表示されます。
設定は、右にあるチェックボックス([共有デバイス設定の更新(Update Shared Device Settings)])をオンにして [選択対象を反映(Propagate Selected)] ボタンをクリックしない限り、現在のデバイスだけに適用されます (右側のチェックボックスが表示されるのは、他のデバイスがこの電話番号を共有している場合だけです)。
[回線のテキストラベル(Line Text Label)]
回線と電話機の組み合わせに使用されているこの電話番号を識別するためのテキストを入力します。
(注) デフォルトの言語は英語です。
[呼び出し表示(Alerting Name)]
共有電話番号に対するアラート中に表示される名前を表します。 非共有電話番号の場合、アラート時には [表示(Display)] フィールドに入力された名前が使用されます。
[ASCII呼び出し表示(Alerting Name ASCII)]
このフィールドには、[呼び出し表示(Alerting Name)] フィールドと同じ情報を指定します。ただし、入力は ASCII 文字に制限されます。 Unicode(国際化)文字をサポートしないデバイスでは、[ASCII呼び出し表示(Alerting Name ASCII)] フィールドの内容が表示されます。
[スピードダイヤル(Speed Dial)]
ユーザがスピード ダイヤル ボタンを押したときにシステムによってダイヤルされる番号を入力します。 0 ~ 9 の数字、*、#、および +(国際的なエスケープ文字)を入力することができます。
[外線電話番号マスク(External Phone Number Mask)]
この回線からコールを行うときに発信者 ID 用に送信される電話番号(またはマスク)を入力します。
最大 24 桁の数字と文字「X」を入力できます。 X は電話番号を表し、パターンの最後に配置する必要があります。 たとえば、972813XXXX というマスクを指定すると、内線 1234 からの外線コールには発信者 ID 番号 9728131234 が表示されます。
[インターコム電話番号の設定(Intercom Directory Number Settings)]
[コーリングサーチスペース(Calling Search Space)]
ドロップダウン リスト ボックスから、適切なコーリング サーチ スペースを選択します。 コーリング サーチ スペースは、この電話番号からコールが行われる番号を検索するパーティションの集合から構成されています。 選択した値は、この電話番号を使用するすべてのデバイスに適用されます。
[プレゼンスグループ(Presence Group)]
このフィールドにはプレゼンス機能を設定します。
ドロップダウン リスト ボックスから、この電話番号に対するプレゼンス グループを選択します。 選択されたグループでは、この電話番号をモニタできるデバイス、エンド ユーザ、およびアプリケーション ユーザが指定されます。
[自動応答(Auto Answer)]
次のいずれかのオプションを選択して、この電話番号の自動応答機能をアクティブにします。
- [自動応答オフ(Auto Answer Off)](デフォルト)
- [ヘッドセットで自動応答(Auto Answer with Headset)]
- [スピーカフォンで自動応答(Auto Answer with Speakerphone)]
(注) 共有回線を持つデバイスに自動応答を設定しないでください。
[デフォルトのアクティブデバイス(Default Activated Device)]
ドロップダウン リスト ボックスから、電話番号に対するデフォルトのアクティブ デバイスを選択します。 電話番号がデフォルトでアクティブになっている電話機を指定します。 ドロップダウン リストには、インターコムをサポートしているデバイスのみが表示されます。
(注) インターコム電話番号がインターコム回線としてアクティブになるデフォルトのアクティブ デバイスを指定する必要があります。
(注) Cisco Extension Mobiligy 用に設定されているデバイス プロファイルでインターコム DN が指定されている場合、デバイスがインターコム機能をサポートし、ユーザが指定されたデフォルト アクティブ デバイスにデバイス プロファイルを使用してログインしたときのみ、そのインターコム DN がインターコム回線として表示されます。
BAT スプレッドシートを使用した電話機 CSV データ ファイルの作成
手順BAT とともに使用するよう設計された Microsoft Excel スプレッドシートを使用して、新しい電話機または IP テレフォニー デバイスをシステムに追加することができます。 この BAT スプレッドシートは、選択されたデバイスのオプションを自動的に調整するマクロを備えています。
BAT スプレッドシートを使用して、CSV データ ファイルを作成します。 スプレッドシート内でファイル形式を定義することができるので、BAT スプレッドシートはデータ ファイル形式を使用して CSV データ ファイルのフィールドを表示します。
(注)
いずれかのフィールドにカンマを入力した場合、BAT.xlt を使用して BAT 形式にエクスポートするときに、そのフィールド エントリは二重引用符で囲まれます。
BAT スプレッドシートにブランク行を入力すると、その空の行はファイルの終わりとして扱われ、ブランク行の後に入力されているデータは BAT 形式に変換されません。
CTI ポートを追加する際に、ダミー MAC アドレス オプションを使用することができます。 このオプションを使用すると、ダミー MAC アドレスの形式で、CTI ポートごとに固有のデバイス名が指定されます。このダミー MAC アドレスは、後で、 Cisco Unified Communications Manager の管理ページまたは Unified CM Auto-Register Phone Tool を使用して手動で更新できます。 H.323 クライアント、VGC Phone、および VGC Virtual Phone には、ダミー MAC アドレス オプションを使用しないでください。
ダミー MAC アドレス オプションでは、次の形式のダミー MAC アドレスが自動的に生成されます。
XXXXXXXXXXXX
ここで、X は任意の 12 文字の 16 進数(0 ~ 9 および A ~ F)を表します。
注目:BAT スプレッドシートで電話機に関して定義する回線およびスピード ダイヤルの数は、BAT 電話テンプレートで定義されている数を超えないようにしてください。この数を超えている場合、CSV データ ファイルおよび BAT テンプレートを挿入しようとするとエラーが発生します。
BAT スプレッドシートのすべてのフィールドの編集が完了したら、内容を CSV 形式のデータ ファイルにエクスポートできます。 エクスポートされる CSV 形式のデータ ファイルには、次のようなデフォルトのファイル名が割り当てられます。
<tabname>-<timestamp>.txt
ここで、<tabname> は、作成した入力ファイルのタイプ(たとえば、phones)を表し、<timestamp> は、ファイルが作成された正確な日時を表します。
エクスポートされたファイルをローカル ワークステーション上に保存したら、この CSV 形式のデータ ファイルの名前を変更することができます。
(注)
カンマが入った CSV ファイル名(例:abcd,e.txt)は、 Cisco Unified Communications Manager サーバにアップロードできません。
ステップ 1 BAT.xlt ファイルを検索し、ダブルクリックして、BAT スプレッドシートを開きます。 ステップ 2 プロンプトが表示されたら、[マクロを有効にする] ボタンをクリックして、スプレッドシート機能を使用します。 ステップ 3 電話機オプションを表示するには、スプレッドシートの下部にある [電話 (Phones)] タブをクリックします。 ステップ 4 次のデバイス タイプのいずれかのオプション ボタンを選択します。 選択するデバイス タイプによって BAT スプレッドシート内のデータの検索条件が決まります。
スプレッドシートには、選択されたデバイスで使用可能なオプションが表示されます。 たとえば、[電話(Phones)] を選択すると、電話回線数とスピード ダイヤル数のフィールドが表示されます。ステップ 5 各電話機の BAT スプレッドシートに表示するデバイスと回線のフィールドを選択します。 次の操作を行います。
ステップ 6 [電話回線数(Number of Phone Lines)] ボックスが表示されるまで右にスクロールし、電話機の回線数を入力します。 入力する回線数は、BAT テンプレートで設定した回線数を超えることはできません。
ステップ 7 電話機の [スピードダイヤルの最大数(Maximum Number of Speed Dials)] ボックスでスピード ダイヤル ボタンの数を入力する必要があります。 入力するスピード ダイヤル数は、BAT テンプレートで設定したスピード ダイヤル数を超えることはできません。
ボタン数を入力すると、各スピード ダイヤル番号用のカラムが表示されます。ステップ 8 [BLFスピードダイヤルの最大数(Maximum Number of BLF Speed Dials)] ボックスで、ビジー ランプ フィールド(BLF)スピード ダイヤル ボタンの数を入力します。 ボタン数を入力すると、各 BLF スピード ダイヤル番号用のカラムが表示されます。 ステップ 9 スプレッドシートで回線ごとに個々の電話機のデータを入力します。 すべての必須フィールド、および該当するオプション フィールドに値を入力します。 各カラムの見出しは、フィールドの長さ、およびそのフィールドが必須かオプションかを指定しています。 電話機のフィールドの説明は、表 1を参照してください。
ステップ 10 電話機ごとに MAC アドレスを入力しなかった場合は、[ダミーMACアドレスの作成(Create Dummy MAC Address)] チェックボックスをオンにします。 注目:H.323 クライアント、VGC Phone、および VGC Virtual Phone には、ダミー MAC アドレス オプションを使用しないでください。
ステップ 11 [BAT形式にエクスポート(Export to BAT Format)] をクリックして BAT Excel スプレッドシートから CSV 形式のデータ ファイルにデータを転送します。 このファイルは、デフォルトのファイル名(<tabname>-<timestamp>.txt)で、ローカル ワークステーション上で選択したフォルダに保存されます。
ヒント エクスポートされた CSV データ ファイルを読み取る方法については、BAT 内の [電話の挿入(Insert Phones)] ウィンドウで [サンプルファイルの表示(View Sample File)] へのリンクをクリックしてください。
次の作業CSV データ ファイルを Cisco Unified Communications Manager の最初のノードにあるデータベース サーバにアップロードして、BAT が CSV データ ファイルにアクセスできるようにする必要があります。
関連情報
BAT スプレッドシートの電話機フィールドの説明
次の表で、CSV データ ファイルにデバイスと回線の詳細を追加する場合に使用可能な電話機フィールドについて説明します。
表 4 BAT スプレッドシートの電話機フィールドの説明 フィールド
説明
[デバイスフィールド(Device Fields)]
[MACアドレス/デバイス名(MAC Address/Device Name)]
電話機、VGC Virtual Phone、および VGC Phone の MAC アドレスを入力します。 CTI ポートまたは H.323 クライアントの固有の ID(デバイス名)を入力します。 [ダミーMACアドレスの作成(Create Dummy MAC Addresses)] チェックボックスをオンにすると、固有のデバイス ID を自動的に生成できます。
[説明(Description)]
電話機またはデバイスを特定する説明(たとえば、「Conference Room A」や「John Smith」)を入力します。 説明には、任意の言語で最大 50 文字を指定できますが、二重引用符(")、パーセント記号(%)、アンパサンド(&)、バックスラッシュ(\)、山カッコ(<>)は使用できません。
[メディアリソースグループリスト(Media Resource Group List)]
このグループの電話機またはポートのメディア リソース グループ リスト(MRGL)を入力します。
MRGL は、優先順位が付けられたメディア リソース グループのリストを指定します。 アプリケーションは、MRGL に定義されている優先順位に従って、使用可能なメディア リソースの中から、必要なメディア リソースを選択できます。
[ユーザ保留音源(User Hold Audio Source)]
このグループの IP Phone または CTI ポートが使用するユーザ保留オーディオ ソースを入力します。
ユーザ保留オーディオ ソースは、ユーザがコールを保留にしたときに再生される音楽のオーディオ ソースを特定します。
[ネットワーク保留MOH音源(Network Hold MOH Audio Source)]
このグループの IP Phone または CTI ポートが利用するネットワーク保留オーディオ ソースを入力します。
ネットワーク保留オーディオ ソースは、システムがコールを保留にするとき(たとえば、ユーザがコールを転送したときや、コール パークにしたとき)に再生される音楽のオーディオ ソースを特定します。
[ユーザロケール(User Locale)]
このグループの IP Phone に関連付ける国/地域と言語の組み合わせを入力します。
この選択内容によって、言語やフォントを含むロケール属性のどれをこのユーザに適用するか、およびこのユーザの Cisco Unified Communications Manager のユーザ ウィンドウと電話機をどの言語で表示するかが決まります。
[ネットワークロケール(Network Locale)]
このグループの電話機に関連付けるネットワーク ロケールを入力します。
ネットワーク ロケールは、シスコのゲートウェイと電話機が、特定地域の PSTN およびその他のネットワークと通信するときに使用するトーンと断続周期を提供します。
[ソフトキーテンプレート(Softkey Template)]
このグループ内の電話機すべてに使用されるソフトキー テンプレートを入力します。
[共通の電話プロファイル(Common Phone Profile)]
ドロップダウン リスト ボックスで、使用可能な共通の電話プロファイルのリストから、共通の電話プロファイルを選択します。
[デバイスプレゼンスグループ(Device Presence Group)]
プレゼンス機能で使用すると、SIP または SCCP を実行する電話機は、BLF スピード ダイヤル ボタンとして電話機に設定されたプレゼンス エンティティに関するステータス(たとえば、電話番号)を要求するので、ウォッチャとして機能します。
電話機によってプレゼンス エンティティのステータスを受信するには、電話番号に適用されるプレゼンス グループのステータスを [プレゼンスグループの設定(Presence Group Configuration)] ウィンドウに示されるとおり表示するよう許可されているプレゼンス グループを選択します。
ヒント プレゼンス機能の詳細については、『 Cisco Unified Communications Manager 機能およびサービス ガイド』を参照してください。 [電話ロード名(Phone Load Name)]
該当する場合は、カスタム電話機ロードを入力します。
(注) このフィールドに入力される値は、選択された電話機のデフォルト値を上書きします。
値は CTI ポートには適用されません。
[セキュリティプロファイル(Security Profile)]
デバイスに適用するセキュリティ プロファイルを入力します。 選択したプロファイルを電話機がサポートしていない場合は、 Cisco Unified Communications Manager で設定が適用できません。
すべての電話で、セキュリティ プロファイルを適用する必要があります。 電話機がセキュリティをサポートしていない場合は、非セキュア プロファイルを選択します。
[デバイスSUBSCRIBE CSS(Device SUBSCRIBE CSS)]
プレゼンス機能で使用した場合、電話機からの登録要求を Cisco Unified Communications Manager がルーティングする方法は、SUBSCRIBE コーリング サーチ スペースによって決まります。 この目的に使用するコーリング サーチ スペースを入力します。
ヒント プレゼンス機能の詳細については、『 Cisco Unified Communications Manager 機能およびサービス ガイド』を参照してください。 [E.164]
ゲートキーパーに登録されている E.164 アドレスを選択します。
(注) H.323 クライアントがゲートキーパー制御のデバイスとして設定されていることを確認します。
(注) このフィールドには、ゲートキーパー制御の H.323 クライアント用の値を入力する必要があります。 このフィールドに入力できるのは、数字(0 ~ 9)と特殊文字の # および * だけです。
[ユーザID(User ID)]
この電話機ユーザのユーザ ID を入力します。
[メディアリソースグループリスト(Media Resource Group List)]
メディア リソース グループを優先順に並べたグループが表示されます。 アプリケーションは、メディア リソース リストで定義された優先順位に従って、使用可能なメディア リソースから、必要なメディア リソース、たとえば、保留音サーバを選択します。
[AARコーリングサーチスペース(AAR Calling Search Space)]
デバイスが自動代替ルーティング(AAR)の実行時に使用する適切なコーリング サーチ スペースを入力します。 AAR コーリング サーチ スペースは、帯域幅不足によってコールがブロックされないように、収集された(発信)番号のルーティング方法を決定するために検索されるルート パーティションの集合を指定します。
[MLPPドメイン(MLPP Domain)]
このデバイスに関連付けられている MLPP ドメインの 16 進数値を入力します。 ブランクまたは 0 ~ FFFFFF の値である必要があります。
[MLPP通知(MLPP Indication)]
(使用可能な場合)優先トーンを再生する機能のあるデバイスが、MLPP 優先コールを行うときにその機能を使用するかどうかを指定します。
[MLPPプリエンプション(MLPP Preemption)]
進行中のコールを優先できるデバイスが MLPP 優先コールの発信時にその優先機能を使用するかどうかを指定します(使用可能な場合)。
[単一パケットキャプチャモード(Signal Packet Capture Mode)]
信号パケット キャプチャに設定するモードを入力します。
[パケットキャプチャ時間(Packet Capture Duration)]
パケット キャプチャの時間を分単位で入力します。 最大 300 分の継続時間を入力できます。
[認証文字列(Authentication String)]
4 ~ 10 桁の数値を入力します。 ローカルで有効な証明書をインストール、アップグレード、またはトラブルシューティングするには、電話機のユーザまたは管理者が認証文字列を電話機に入力する必要があります。
[プレゼンテーションインジケータを無視(Ignore Presentation Indicator)]
「Yes」または「No」を入力して、コール表示の制限をコールごとに設定します。 このチェックボックスをオンにすると、 Cisco Unified Communications Manager は内部コールに対して受信したすべての表示制限を無視します。
[SIPプロファイル(SIP Profile)]
デフォルトの SIP プロファイルまたはすでに作成した特定のプロファイルを入力します。 SIP プロファイルは、デフォルトのテレフォニー イベント ペイロードのタイプ、登録タイマーおよびキープアライブ タイマー、メディア ポート、Iris、および動的 DNS サーバ アドレスなど、電話機の特定の SIP 情報を提供します。
[ダイジェストユーザ(Digest User)]
ダイジェスト認証(SIP セキュリティ)で使用します。電話機に関連付けるエンド ユーザを選択します。
選択したユーザのダイジェスト信用証明書を設定したことを確認します([エンドユーザの設定(End User Configuration)] ウィンドウを参照)。
電話機の設定を保存し電話機をリセットした後、ユーザのダイジェスト信用証明書が、電話機の設定ファイルに追加されます。
ダイジェスト認証の詳細については、『 Cisco Unified Communications Manager セキュリティ ガイド』を参照してください。
[ログアウトプロファイル(Log Out Profile)]
エクステンション モビリティのユーザがログアウトするときに電話機がロードするプロファイルを入力します。 Cisco Unified Communications Manager の管理ページでログアウト プロファイルを設定する必要があります。
[現在のデバイス設定を使用(Use Current Device Setting)]:これを選択すると、自動生成されたデバイス プロファイルが、デフォルト デバイス プロファイルとして作成されます。
[ユーザデバイスプロファイルを選択(Select a User Device Profile)]:これを選択すると、定義済みのユーザ デバイス プロファイルが割り当てられ、このデバイスのデフォルト デバイス プロファイルになります。
選択されたユーザ デバイス プロファイルは、ログインしているユーザがいないとき、デバイスにロードされます。
[SIPコーデック、MTP優先発信コーデック(SIPCodec_MTPPreferredOrigCodec)]
SIP コールにメディア ターミネーション ポイントが必要な場合に使用するコーデックを入力します。
[ダイヤルルール(Dial Rules)]
必要に応じて、適切な SIP ダイヤル ルールを入力します。 SIP ダイヤル ルールにより、SIP を実行する Cisco Unified IP Phone 7905、7912、7940、および 7975 ではローカルのダイヤル プランを使用できるため、コールが処理される前にユーザがキーを押したりタイマーを待ったりする必要がなくなります。
ダイヤル ルールを SIP を実行する IP Phone に適用しない場合は、[SIPダイヤルルール(SIP Dial Rules)] フィールドを [<なし(None)>] のままにします。 この場合、コールを処理するには、ユーザが [ダイヤル] ソフトキーを使用するか、タイマーが期限切れになるのを待つ必要があります。
[CSS再ルーティング(CSS Reroute)]
再ルーティングに使用するコーリング サーチ スペースを入力します。
参照側の再ルーティング用コーリング サーチ スペースが、参照側からターゲットへのルート検索に使用されます。 再ルーティング コーリング サーチ スペースが原因で参照が失敗すると、Refer Primitive は「405 Method Not Allowed」メッセージによって要求を拒否します。
リダイレクション(3xx)プリミティブおよび転送機能でも、リダイレクト先または転送先を検索するときに、再ルーティング コーリング サーチ スペースが使用されます。
[共通電話設定(Common Phone Configuration)]
電話機に割り当てられる共通の電話設定を入力します。 共通の電話設定には、特定のユーザに関連付けられた属性(サービスまたは機能)があります。
[コーリングサーチスペースREFER(Calling Search Space Refer)]
アウトオブダイアログ REFER コーリング サーチ スペースを入力します。
Cisco Unified Communications Manager は、アウトオブダイアログ(OOD)REFER 許可コーリング サーチ スペース(CSS)を使用して SIP アウトオブダイアログ REFER を許可します。 管理者は、参照側の OOD CSS を設定することによって、アウトオブダイアログ REFER の使用を制限します。 参照プリミティブでは、OOD REFER 要求を拒否し、「403 Forbidden」というメッセージを返します。
[証明書の操作(Certificate Operation)]
次のオプションから実行する認証操作を入力します。
[証明書操作完了日時(Certificate Operation Completion Time)]
このフィールドは、[証明書の操作(Certificate Operation)] の [インストール/アップグレード(Install/Upgrade)]、[削除(Delete)]、および [トラブルシューティング(Troubleshoot)] オプションをサポートし、操作を完了させる日付および時刻を指定します。
[セキュアシェルユーザ(Secure Shell User)]
セキュア シェル ユーザのユーザ ID を入力します。 設定している電話機がセキュリティ保護されたシェルへのアクセスをサポートしていない場合、このフィールドは表示されません。 Cisco Technical Assistance Center(TAC)は、トラブルシューティングのためにセキュリティ保護されたシェルを使用します。 詳細については、TAC に問い合わせてください。
[セキュアシェルパスワード(Secure Shell Password)]
セキュア シェル ユーザのパスワードを入力します。 設定している電話機がセキュリティ保護されたシェルへのアクセスをサポートしていない場合、このフィールドは表示されません。 詳細については、TAC に問い合わせてください。
[デバイスプール(Device Pool)]
適切なデバイス プールを入力します。
デバイス プールは、このデバイスのプロパティの集合(たとえば、Cisco Unified Communications Manager グループ、日付/時刻グループ、地域、およびデバイスの自動登録用のコーリング サーチ スペース)を指定します。
[ビルトインブリッジ(Built-in Bridge)]
「Off」、「On」、または「Default」を入力して、割り込み機能のためのビルトイン会議ブリッジを有効または無効にします。
設定情報の詳細については、『Cisco Unified Communications Manager 機能およびサービス ガイド』の「割り込みとプライバシー」を参照してください。
[コーリングサーチスペース(Calling Search Space)]
適切なコーリング サーチ スペースを入力します。 コーリング サーチ スペースは、この電話番号からコールが行われる番号を検索するパーティションの集合から構成されています。 選択した値は、この電話番号を使用するすべてのデバイスに適用されます。 コーリング サーチ スペースに関する設定情報については、『Cisco Unified Communications Manager アドミニストレーション ガイド』を参照してください。
[ロケーション(Location)]
この電話機に対して、適切な場所を選択します。 ロケーションに [ハブなし(Hub_None)] を設定すると、そのロケーションの機能では、この電話機が消費する帯域幅を把握しません。
[モジュール1(Module 1)]
適切な拡張モジュールまたは「None」を入力します。
[モジュール1ロード名(Module 1 Load Name)]
適切な拡張モジュール用のカスタム ソフトウェアを入力します(該当する場合)。
このフィールドに入力される値は、現在のモデルのデフォルト値を上書きします。 ファームウェア ロードがモジュール ロードと一致していることを確認してください。
[モジュール2(Module 2)]
適切な拡張モジュールまたは「None」を入力します。
[モジュール2ロード名(Module 2 Load Name)]
2 番目の拡張モジュール用のカスタム ソフトウェアを入力します(該当する場合)。
このフィールドに入力される値は、現在のモデルのデフォルト値を上書きします。 ファームウェア ロードがモジュール ロードと一致していることを確認してください。
[電話テンプレート(Phone Template)]
このタイプのバルク トランザクション用に作成した電話テンプレートを入力します。
[認証サーバ(Authentication Server)]
電話機の Web サーバに対する要求を認証するときに、電話機が使用する URL を入力します。 認証 URL を指定しない場合、認証を必要とする Cisco Unified IP Phone の拡張機能は動作しません。 デフォルト値を受け入れるには、このフィールドをブランクのままにします。
デフォルトでは、この URL は、インストール時に設定された Cisco Unified IP Phone セルフケア ポータル ウィンドウにアクセスします。
[プロキシサーバ(Proxy Server)]
電話機の HTTP クライアントから非ローカル ホスト アドレスにアクセスするために、プロキシ HTTP 要求に使用されるホストおよびポート(たとえば、proxy.cisco.com:80)を入力します。
電話機が、サービスの中で URL(たとえば、www.cisco.com)を受信するときに cisco.com ドメインで設定されていない場合、その電話機はプロキシサーバを使用してその URL にアクセスします。 cisco.com ドメインで設定されている場合、電話機は、URL と同じドメインにいるので、プロキシを使用せずに URL にアクセスします。
[アイドル(Idle)]
[アイドルタイマー(Idle Timer)] フィールドで指定された時間、電話機が使用されなかったときに、Cisco Unified IP Phone LCD スクリーンにアイドル表示として表示される XML サービスの URL を入力します。
たとえば、電話機が 5 分間使用されなかったときに、LCD スクリーンにロゴを表示できます。
[アイドルタイマー(Idle Timer)]
電話機に許容される非動作時間(秒数)を入力します。非動作のままこの時間が経過すると、電話機は [アイドル(Idle)] フィールドに指定された URL を表示します。
[セキュア認証URL(Secure Authentication URL)]
電話機の Web サーバに対する要求を検証するために、この電話機が使用するセキュア URL を入力します。
(注) [セキュア認証URL(Secure Authentication URL)] の値を指定しないと、デバイスでは非セキュア URL が使用されます。 セキュア URL と非セキュア URL の両方を指定した場合、デバイスではデバイスの持つ機能に応じて適切な URL が選択されます。
デフォルトでは、この URL は、インストール時に設定された Cisco Unified IP Phone セルフケア ポータル ウィンドウにアクセスします。
デフォルト値を受け入れるには、このフィールドをブランクのままにします。
最大長:255
[セキュアディレクトリURL(Secure Directory URL)]
電話機がディレクトリ情報を取得する際の取得元となるサーバのセキュア URL を入力します。 このパラメータは、ディレクトリ ボタンを押したときに、セキュリティ保護された Cisco Unified IP Phone で使用する URL を指定します。
(注) [セキュアディレクトリURL(Secure Directory URL)] の値を指定しないと、デバイスでは非セキュア URL が使用されます。 セキュア URL と非セキュア URL の両方を指定した場合、デバイスではデバイスの持つ機能に応じて適切な URL が選択されます。
デフォルト値を受け入れるには、このフィールドをブランクのままにします。
最大長:255
[セキュアアイドルURL(Secure Idle URL)]
[アイドルタイマー(Idle Timer)] フィールドの指定に従って電話機がアイドル状態になったときに、Cisco Unified IP Phone のディスプレイに表示する情報のセキュア URL を入力します。 たとえば、電話機が 5 分間使用されなかったときに、LCD 上にロゴを表示できます。
(注) [セキュアアイドルURL(Secure Idle URL)] の値を指定しないと、デバイスでは非セキュア URL が使用されます。 セキュア URL と非セキュア URL の両方を指定した場合、デバイスではデバイスの持つ機能に応じて適切な URL が選択されます。
デフォルト値を受け入れるには、このフィールドをブランクのままにします。
最大長:255
[セキュア情報URL(Secure Information URL)]
Cisco Unified IP Phone がヘルプ テキスト情報を検索できるサーバ ロケーションのセキュア URL を入力します。 この情報は、ユーザが情報([i])ボタンまたは疑問符([?])ボタンを押すと表示されます。
(注) [セキュア情報URL(Secure Information URL)] の値を指定しないと、デバイスでは非セキュア URL が使用されます。 セキュア URL と非セキュア URL の両方を指定した場合、デバイスではデバイスの持つ機能に応じて適切な URL が選択されます。
デフォルト値を受け入れるには、このフィールドをブランクのままにします。
最大長:255
[セキュアメッセージURL(Secure Messages URL)]
メッセージ サーバのセキュア URL を入力します。 ユーザがメッセージ ボタンを押すと、Cisco Unified IP Phone はこの URL に接続されます。
(注) [セキュアメッセージURL(Secure Messages URL)] の値を指定しないと、デバイスでは非セキュア URL が使用されます。 セキュア URL と非セキュア URL の両方を指定した場合、デバイスではデバイスの持つ機能に応じて適切な URL が選択されます。
デフォルト値を受け入れるには、このフィールドをブランクのままにします。
最大長:255
[セキュアサービスURL(Secure Services URL)]
Cisco Unified IP Phone サービスのセキュア URL を入力します。 これは、ユーザがサービス ボタンを押したときに、セキュアな Cisco Unified IP Phone が接続される場所です。
(注) [セキュアサービスURL(Secure Services URL)] の値を指定しないと、デバイスでは非セキュア URL が使用されます。 セキュア URL と非セキュア URL の両方を指定した場合、デバイスではデバイスの持つ機能に応じて適切な URL が選択されます。
デフォルト値を受け入れるには、このフィールドをブランクのままにします。
最大長:255
[ホットラインデバイス(Hotline Device)]
「T」または「F」を入力します。 ホットライン デバイスは、他のホットライン デバイスにだけ接続できます。 この機能は、オフフックになると自動的に 1 つの電話番号をダイヤルするように電話機を設定する PLAR の拡張機能です。 ホットラインでは、PLAR を使用するデバイスに適用できる制限事項が追加されます。
ホットラインを実装するには、補足サービス ソフトキーのないソフトキー テンプレートを作成して、ホットライン デバイスに適用する必要もあります。
[オーナーのユーザID(Owner User ID)]
プライマリ電話機ユーザのユーザ ID を入力します。
[共通の電話プロファイル(Common Phone Profile)]
電話機に割り当てられる共通の電話プロファイルを入力します。 共通の電話プロファイルには、特定のユーザに関連付けられている属性(サービスまたは機能)が含まれています。
[デバイスモビリティモード(Device Mobility Mode)]
このデバイスのデバイス モビリティ機能をオンまたはオフにするか、「Default」を入力してデフォルトのデバイス モビリティ モードを使用します。
設定情報の詳細については、『 Cisco Unified Communications Manager 機能およびサービス ガイド』の「デバイス モビリティ」を参照してください。
[DNDオプション(DND Option)]
次のオプションから DND オプションを選択します。
[DND着信呼警告(DND Incoming Call Alert)]
次のオプションのいずれかを入力します。
[プライバシ(Privacy)]
次のオプションのいずれかを入力します。
[信頼されたリレーポイントを使用(Use Trusted Relay Point)]
次のオプションのいずれかを入力します。
[情報(Information)]
Cisco Unified IP Phone の情報ボタンのヘルプ テキスト URL を入力します。
[ディレクトリ(Directory)]
Cisco Unified IP Phone のディレクトリ サーバの URL を入力します。
[メッセージ(Messages)]
Cisco Unified IP Phone のボイスメッセージのアクセス パイロット番号を入力します。
[サービス(Services)]
Cisco Unified IP Phone のサービス メニューの URL を入力します。
[発呼側トランスフォーメーションCSS(Calling Party Transformation CSS)]
この設定により、デバイスの発呼側の番号をローカライズできるようになります。 入力した [発呼側トランスフォーメーションCSS(Calling Party Transformation CSS)] には、このデバイスに割り当てる発呼側トランスフォーメーション パターンが含まれます。
[ワンボタン割込み(Single Button Barge)]
次のオプションのいずれかを入力します。
[回線をまたいで参加(Join Across Lines)]
次のオプションのいずれかを入力します。
[BLFオーディオアラート設定(電話がアイドルのとき)(BLF Audible Alert Setting (Phone Idle))]
次の値から、使用する BLF オーディオ アラートの設定値を入力します。
この必須フィールドでは、コールがビジー回線フィールド(BLF)ボタンでモニタされている回線のいずれかに着信した場合、このパラメータで現在アイドルの電話機にオーディオ アラートとビジュアル アラートを送信します。
[BLFオーディオアラート設定(電話がビジーのとき)(BLF Audible Alert Setting (Phone Busy))]
この必須フィールドでは、次の値から、使用する BLF オーディオ アラートの設定値を入力します。
[常にプライム回線を使用する(Always Use Prime Line)]
次の値から、使用する [常にプライム回線を使用する(Always Use Prime Line)] の設定値を入力します。
[ボイスメッセージには常にプライム回線を使用する(Always Use Prime Line for Voice Message)]
次の値から、使用する [ボイスメッセージには常にプライム回線を使用する(Always Use Prime Line for Voice Message)] の設定値を入力します。
[サービスのプロビジョニング(Services Provisioning)]
この必須フィールドでは、次のいずれかの値を入力します。
[電話機のパーソナライゼーション(Phone Personalization)]
次の値のいずれかを入力します。
[モビリティID名(Mobility Identity Name)]
リモート接続先を識別する名前を入力します。
[モビリティID接続先番号(Mobility Identity Destination Number)]
接続先の電話番号を入力します。 市外局番のほか、外線へのアクセスに必要な追加の番号があればすべて含めます。 最大フィールド長は 24 文字です。値として使用できるのは、0 ~ 9 の数字、*、および # です。 リモート接続先の発信者 ID を設定することをお勧めします。
接続先番号のルーティングに必要なトランスレーション パターンまたはルート パターンを追加してください。
[モビリティID呼び出し開始タイマー(Mobility Identity Answer Too Soon Timer)]
携帯電話が応答されるまでに経過する最短時間(ミリ秒)。
範囲:0 ~ 10,000 ミリ秒
デフォルト:1,500 ミリ秒
[モビリティID呼び出し終了タイマー(Mobility Identity Answer Too Late Timer)]
携帯電話が応答されるまでに経過する最長時間(ミリ秒)。
範囲:10,000 ~ 300,000 ミリ秒
デフォルト:19,000 ミリ秒
[モビリティID呼び出し前の遅延(Mobility Identity Delay Before Ringing Cell)]
コールがデスク電話から携帯電話に転送された場合、携帯電話で呼び出し音が鳴るまでに経過する時間を入力します。
範囲:0 ~ 30,000 ミリ秒
デフォルト:4,000 ミリ秒
[モビリティID時刻アクセス(Mobility Identity Time of Day Access)]
このリモート接続先に関連付けられている時刻アクセス レコードを入力します。
[モビリティIDタイムゾーン(Mobility Identity Time Zone)]
このリモート接続先に使用するタイム ゾーンを入力します。
(注) このリモート接続先に使用するタイム ゾーンは時刻アクセス機能で使用され、このリモート接続先に対するコールを許可または拒否します。
[モビリティIDモバイルコネクトの有効化(Mobility Identity Enable Mobile Connect)]
このフィールドに「T」または「F」を入力すると、コールの着信時にデスク電話とリモート接続先で同時に呼び出し音を鳴らしたり、鳴らさないようにしたりすることができます。
[モバイルスマートクライアントプロファイル(Mobile Smart Client Profile)]
モバイル スマート クライアント プロファイルは、スマート クライアント デバイスとデュアルモード フォンのスマート クライアントです。
このフィールドに「Standard Cisco Unified Mobile Communicator Profile」と入力して、Cisco Unified Mobile Communicator を有効にします。 ブランクにすると、無効になります。
[位置情報(Geo Location)]
電話機に関連付ける位置情報を入力します。
電話機を位置情報に関連付けない場合は、「unspecified」と入力します。
[機能管理ポリシー(Feature Control Policy)]
このグループの電話機の機能管理ポリシーを入力します。
機能管理ポリシーは、機能のアピアランスおよび電話機に表示される関連付けられたソフトキーを指定します。
[回線フィールド(Line Fields)](オプション)
[電話番号(Directory Number)]
電話機の電話番号を、24 桁以下の数字と特殊文字で入力します。
[ルートパーティション(Route Partition)]
電話番号が属するルート パーティションを入力します。
(注) 電話番号は複数のパーティションに現れる可能性があります。
[表示(Display)]
コールの着信側の電話機ディスプレイに表示するテキストを入力します(たとえば、John Smith などのユーザ名や Conference Room 1 などの電話機の設置場所など)。
(注) このフィールドをブランクにしておくと、[電話番号(Directory Number)] フィールドに入力された値が使用されます。
(注) デフォルトの言語は英語です。
[回線のテキストラベル(Line Text Label)]
回線と電話機の組み合わせに使用されているこの電話番号を識別するためのテキストを入力します。
(注) デフォルトの言語は英語です。
[ボイスメールプロファイル(Voice Mail Profile)]
パイロット番号をこの回線の電話番号と同じにするには、このパラメータを入力します。 この機能は、この電話機に対してボイスメッセージ サーバが設定されていない場合に役立ちます。
[回線コーリングサーチスペース(Line Calling Search Space)]
この電話番号から呼び出される番号を検索するパーティションを入力します。
(注) このフィールドに変更を加えると、[コールピックアップグループ(Call Pickup Group)] フィールドのリストに表示されるピックアップ グループ名が更新されます。 この設定値は、この電話番号を使用するすべてのデバイスに適用されます。
[AARグループ(AAR Group)]
このデバイスの自動代替ルーティング(AAR)グループを入力します。 AAR グループは、帯域幅不足のためにコールがブロックされないように、コールをルーティングするためのプレフィックス番号を提供します。
AAR グループを [<なし(None)>] に設定すると、ブロックされたコールの再ルーティングは行われません。
[不在転送CSS(Forward All CSS)]
コールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを入力します。
(注) この設定値は、この電話番号を使用するすべてのデバイスに適用されます。
[不在転送のセカンダリCSS(Secondary CSS for Forward All)]
セカンダリ コーリング サーチ スペース(CSS)を入力します。
[不在転送の接続先(Forward All Destination)]
すべてのコールが自動転送される先の電話番号またはディレクトリ URI を入力します。
(注) この設定値は、ダイヤル可能な任意の電話番号(制限されていない限り、外部の宛先を含む)、およびこの電話番号を使用するすべてのデバイスに適用されます。
[話中転送CSS(外部)(Forward Busy External CSS)]
外部番号からのコールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを入力します。
(注) この設定値は、この電話番号を使用するすべてのデバイスに適用されます。
[話中転送CSS(内部)(Forward Busy Internal CSS)]
内部番号からのコールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを入力します。
(注) この設定値は、この電話番号を使用するすべてのデバイスに適用されます。
[話中転送の接続先(外部)(Forward Busy Destination External)]
回線が使用中のときに外部番号からのコールが自動転送される先の電話番号またはディレクトリ URI を入力します。
(注) この設定値は、ダイヤル可能な任意の電話番号(制限されていない限り、外部の宛先を含む)、およびこの電話番号を使用するすべてのデバイスに適用されます。
[話中転送の接続先(内部)(Forward Busy Destination Internal)]
回線が使用中のときに内部番号からのコールが自動転送される先の電話番号またはディレクトリ URI を入力します。
(注) この設定値は、ダイヤル可能な任意の電話番号(制限されていない限り、外部の宛先を含む)、およびこの電話番号を使用するすべてのデバイスに適用されます。
[無応答時転送CSS(外部)(Forward No Answer External CSS)]
外部番号からのコールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを入力します。 この設定値は、システム内で設定されている場合だけ、表示されます。
(注) この設定値は、この電話番号を使用するすべてのデバイスに適用されます。
[無応答時転送CSS(内部)(Forward No Answer Internal CSS)]
内部番号からのコールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを入力します。 この設定値は、システム内で設定されている場合だけ、表示されます。
(注) この設定値は、この電話番号を使用するすべてのデバイスに適用されます。
[無応答時転送の接続先(外部)(Forward No Answer External Destination)]
電話機が応答しない場合に外部番号からのコールが自動転送される先の電話番号またはディレクトリ URI を入力します。
(注) この設定値は、ダイヤル可能な任意の電話番号(制限されていない限り、外部の宛先を含む)、およびこの電話番号を使用するすべてのデバイスに適用されます。
[無応答時転送の接続先(内部)(Forward No Answer Internal Destination)]
電話機が応答しない場合に内部番号からのコールが自動転送される先の電話番号またはディレクトリ URI を入力します。
(注) この設定値は、ダイヤル可能な任意の電話番号(制限されていない限り、外部の宛先を含む)、およびこの電話番号を使用するすべてのデバイスに適用されます。
[カバレッジなし時転送CSS(外部)(Forward No Coverage External CSS)]
外部番号からのコールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを入力します。 この設定値は、システム内で設定されている場合だけ、表示されます。
(注) この設定値は、この電話番号を使用するすべてのデバイスに適用されます。
[カバレッジなし時転送CSS(内部)(Forward No Coverage Internal CSS)]
内部番号からのコールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを入力します。 この設定値は、システム内で設定されている場合だけ、表示されます。
(注) この設定値は、この電話番号を使用するすべてのデバイスに適用されます。
[カバレッジなし時転送の接続先(外部)(Forward No Coverage External Destination)]
電話機のカバレッジが対応しない場合に外部番号からのコールが自動転送される先の電話番号またはディレクトリ URI を入力します。
(注) この設定値は、ダイヤル可能な任意の電話番号(制限されていない限り、外部の宛先を含む)、およびこの電話番号を使用するすべてのデバイスに適用されます。
[カバレッジなし時転送の接続先(内部)(Forward No Coverage Internal Destination)]
電話機のカバレッジが対応しない場合に内部番号からのコールが自動転送される先の電話番号またはディレクトリ URI を入力します。
(注) この設定値は、ダイヤル可能な任意の電話番号(制限されていない限り、外部の宛先を含む)、およびこの電話番号を使用するすべてのデバイスに適用されます。
[障害時転送のコーリングサーチスペース(外部/内部)(Calling Search Space Forward on Failure External/Internal)]
(CTI ポートのみ)内線コールまたは外線コールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを入力します。 この設定値は、システム内で設定されている場合だけ、表示されます。
(注) この設定値は、この電話番号を使用するすべてのデバイスに適用されます。
[障害時転送の接続先(外部/内部)(Forward on Failure Destination External/Internal)]
(CTI ポートのみ)電話機または CTI アプリケーションに障害が起きたときに、内部番号または外部番号からのコールが自動転送される先の電話番号またはディレクトリ URI を入力します。
[CTI障害時転送の接続先(Forward on CTI Failure Destination)]
この設定は、電話番号を制御するアプリケーションが失敗した場合に、接続されなかった内線コールが自動転送される電話番号を指定します。 外部の電話番号を含め、ダイヤル可能な任意の電話番号を使用します。
内線コールの宛先の値を入力すると、外線コールの [接続先(Destination)] フィールドにこの値が自動的にコピーされます。 外線コールを別の宛先に自動転送する場合は、外線コールの [接続先(Destination)] フィールドに別の値を入力する必要があります。
[CTI障害時転送のコーリングサーチスペース(Forward on CTI Failure Calling Search Space)]
この設定値は、この電話番号を使用するすべてのデバイスに適用されます。
内線コールの CSS を選択すると、外線コールの CSS 設定にこの値が自動的にコピーされます。 外線コールを別のコーリング サーチ スペースに自動転送する場合は、外線コールの CSS に別の設定値を選択する必要があります。
[コールピックアップグループ(Call Pickup Group)]
コール ピックアップ グループ名を選択してコール ピックアップ グループを指定します。コール ピックアップ グループでは、該当のピックアップ グループ番号をダイヤルすることにより、この電話番号への着信コールに応答することができます。
[外線電話番号マスク(External Phone Number Mask)]
この回線からコールを行うときに発信者 ID 用に送信される電話番号(またはマスク)を入力します。
最大 24 桁の数字と文字「X」を入力できます。 X は電話番号を表し、パターンの最後に配置する必要があります。 たとえば、972813XXXX というマスクを指定すると、内線 1234 からの外線コールには発信者 ID 番号 9728131234 が表示されます。
[無応答時転送の呼び出し時間(CFNA)(Forward No Answer Ring Duration (CFNA))]
コールが呼び出し音を送り、応答を待つ時間(秒数)を入力します。この時間内に応答がないと、無応答時の転送着信先にコールを自動転送します。
[転送の接続先(MLPP)(Target Destination (MLPP))]
この電話番号が優先コールを受信したが、その番号もその自動転送先もその優先コールに応答しない場合に、MLPP 優先コールが向けられる先の番号を入力します。
この値には、数字、シャープ(#)、およびアスタリスク(*)を含めることができます。
[コーリングサーチスペース(MLPP)(Calling Search Space (MLPP))]
代替パーティ ターゲット(宛先)番号に関連付けるコーリング サーチ スペースを入力します。
[無応答時の呼び出し時間(MLPP)(No Answer Ring Duration (MLPP))]
優先コールに対してこの電話番号とその自動転送先が応答するのを待つ時間(4 ~ 30 秒)を入力します。この時間内に応答がないと、MLPP 優先コールはこの電話番号の代替パーティに向けて送られます。
Cisco Unified Communications Manager エンタープライズ パラメータの Precedence Alternate Party Timeout で設定されている値を使用する場合は、この設定をブランクのままにします。
[コール最大数(Maximum Number of Calls)]
クラスタ内のデバイスの 1 つの回線に対して最大 200 のコールを設定できます。ただし、デバイスが制限要因となります。 1 つの回線に対してコールの数を設定すると、別の回線に使用可能なコールが減少します。
デフォルトは 4 です。 電話機が回線ごとの複数コールを許可していない場合、デフォルトは 2 です。
CTI ルート ポイントに対しては、各ポートに対して最大 10,000 のコールを設定できます。 デフォルトは 5000 コールです。 このフィールドは [ビジートリガー(Busy Trigger)] フィールドと併せて使用します。
[ビジートリガー(Busy Trigger)]
この設定は、[コール最大数(Maximum Number of Calls)] および [話中転送(Call Forward Busy)] と連動し、回線で表示されるコールの最大数を決定します。 [コール最大数(Maximum Number of Calls)] が 50 に設定され、[ビジートリガー(Busy Trigger)] が 40 に設定されている場合、着信コール 41 は話し中を理由として拒否されます(さらに [話中転送(Call Forward Busy)] が設定されている場合は転送されます)。 この回線が共有されている場合は、すべての回線が話し中になって、初めて着信コールが拒否されることに注意してください。
このフィールドは、CTI ルート ポイント用の [コール最大数(Maximum Number of Calls)] と併せて使用します。 デフォルトは 4500 コールです。
[呼び出し表示(Alerting Name)]
共有電話番号に対するアラート中に表示される名前を表します。 非共有電話番号の場合、アラート時には [表示(Display)] フィールドに入力された名前が使用されます。
[ASCII呼び出し表示(Alerting Name ASCII)]
このフィールドには、[呼び出し表示(Alerting Name)] フィールドと同じ情報を指定します。ただし、入力は ASCII 文字に制限されます。 Unicode(国際化)文字をサポートしないデバイスでは、[ASCII呼び出し表示(Alerting Name ASCII)] フィールドの内容が表示されます。
[自動応答(Auto Answer)]
次のいずれかのオプションを入力して、この電話番号の自動応答機能をアクティブにします。
- [自動応答オフ(Auto Answer Off)](デフォルト)
- [ヘッドセットで自動応答(Auto Answer with Headset)]
- [スピーカフォンで自動応答(Auto Answer with Speakerphone)]
(注) [ヘッドセットで自動応答(Auto Answer with headset)] または [スピーカフォンで自動応答(Auto Answer with speakerphone)] を選択する場合、ヘッドセットまたはスピーカフォンが使用不可になっていないことを確認してください。
共有回線を持つデバイスに自動応答を設定しないでください。
[ルートフィルタ(Route Filter)]
[ルートフィルタ名(Route Filter Name)] フィールドに名前を入力します。 この名前には、最長 50 文字の英数字を指定でき、スペース、ピリオド(.)、ハイフン(-)、および下線文字(_)を任意に組み合わせることが可能です。 各フィルタ名がルート プランで一意であることを確認します。
(注) ルート フィルタには、短くてわかりやすい名前を使用します。 CompanynameLocationCalltype という形式を使用すれば、通常、十分に詳細でありながら、ルート フィルタをすばやく容易に識別する短い名前が作成できます。 たとえば、CiscoDallasMetro という名前は、着信無料のローカル間アクセスであり、シスコのダラス オフィスからのトランスポート領域(LATA)コールのルート フィルタを示します。
[ダイヤルプラン(Dial Plan)]
たとえば、北米番号計画などのダイヤル プランを入力します。
[回線ユーザ保留MOH音源(Line User Hold MOH Audio Source)]
ユーザが電話を保留にしたときの保留音(MOH)のために使用するオーディオ ソースを入力します。
[回線ネットワーク保留MOH音源(Line Network Hold MOH Audio Source)]
ネットワークが電話を保留にしたときの保留音(MOH)のために使用するオーディオ ソースを入力します。
[呼出音設定(電話がアクティブのとき)(Ring Setting (Phone Active))]
この電話機に異なる回線で別のアクティブ コールがあった場合に使用される呼び出し音設定を入力します。 次のいずれかのオプションを選択します。
[呼出音設定(電話がアイドルのとき)(Ring Setting (Phone Idle))]
着信コールを受信し、デバイスに他のアクティブなコールがない場合の、ライン アピアランスに対する呼び出し音設定を入力します。 次のいずれかのオプションを選択します。
[E.164]
ゲートキーパーに登録されている E.164 アドレスを入力します。
(注) H.323 クライアントがゲートキーパー制御のデバイスとして設定されていることを確認します。
(注) このフィールドには、ゲートキーパー制御の H.323 クライアント用の値を入力する必要があります。 このフィールドに入力できるのは、数字(0 ~ 9)と特殊文字の # および * だけです。
[AAR接続先マスク(AAR Destination Mask)]
外部電話番号マスクではなく、使用する設定を入力して、ダイヤルする AAR 接続先を判定します。
[未登録内線の不在転送接続先(Forward Unregistered Internal Destination)]
回線が使用中のときに未登録の内線コールが自動転送される先の電話番号を入力します。
この設定値は、ダイヤル可能な任意の内部電話番号、およびこの電話番号を使用するすべてのデバイスに適用されます。
[未登録内線の不在転送CSS(Forward Unregistered Internal CSS)]
未登録の内線コールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを入力します。
この設定値は、この電話番号を使用するすべてのデバイスに適用されます。
[未登録外線の不在転送接続先(Forward Unregistered External Destination)]
回線が使用中のときに外線コールが自動転送される先の電話番号を入力します。
この設定値は、ダイヤル可能な任意の外部電話番号(制限されていない限り、外部の宛先を含む)、およびこの電話番号を使用するすべてのデバイスに適用されます。
[未登録外線の不在転送CSS(Forward Unregistered External CSS)]
外線コールが指定された宛先に自動転送されるときに使用するコーリング サーチ スペースを入力します。
この設定値は、この電話番号を使用するすべてのデバイスに適用されます。
[オーディオメッセージ受信インジケータのポリシー(Audible Message Waiting Indicator Policy)]
このフィールドを使用して、オーディオ メッセージ受信インジケータのポリシーを設定します。 次のオプションのいずれかを入力します。
[コールピックアップグループオーディオアラートの設定(電話がアイドルのとき)(Call Pickup Group Audio Alert Setting (Phone Idle))]
このフィールドで、着信コールがコール ピックアップ グループのメンバーに送信する通知のタイプが判定されます。 コールが着信した電話機で応答されない場合、コール ピックアップ グループ内のアイドルの電話機で短い呼び出し音が聞こえるか([一度鳴らす(ring once)])、または何も聞こえません([無効(disabled)])。
[コールピックアップグループオーディオアラートの設定(電話がアクティブのとき)(Call Pickup Group Audio Alert Setting (Phone Active))]
このフィールドで、着信コールがコール ピックアップ グループのメンバーに送信する通知のタイプが判定されます。 コールが着信した電話機で応答されない場合、コール ピックアップ グループ内で使用中の電話機でビープ音が聞こえるか、または何も聞こえません(無効)。
[コール録音オプション(Call Recording Option)]
このフィールドで、エージェントのライン アピアランスでの録音オプションが決定されます。 デフォルトでは、録音オプションは [コール録音を無効(Call Recording Disabled)] です。
次のオプションのいずれかを入力します。
- [コール録音を無効(Call Recording Disabled)]:エージェントがライン アピアランスで発信したコールは録音されません。
- [自動コール録音を有効(Automatic Call Recording Enabled)]:エージェントがライン アピアランスで発信したコールが自動的に録音されます。
- [アプリケーションから呼び出されたコール録音を有効(Application Invoked Call Recording Enabled)]:アプリケーションがコール録音を呼び出した場合に、エージェントがライン アピアランスで発信したコールが録音されます。
録音オプションが [自動コール録音を有効(Automatic Call Recording Enabled)] または [アプリケーションから呼び出されたコール録音を有効(Application Invoked Call Recording Enabled)] のいずれかに設定されている場合、ライン アピアランスを録音プロファイルに関連付けることができます。
自動録音が有効な場合、アプリケーションからの録音要求は拒否されます。
[録音プロファイル(Recording Profile)]
このフィールドで、エージェントのライン アピアランスでの録音プロファイルが決定されます。
[モニタリング用コーリングサーチスペース(Monitoring Calling Search Space)]
スーパーバイザのライン アピアランスのモニタリング用コーリング サーチ スペースに、エージェントの回線またはデバイス パーティションを含めてエージェントをモニタできるようにします。
スーパーバイザのライン アピアランス ウィンドウでモニタリング用コーリング サーチ スペースを入力します。
デフォルト値は [なし(None)] です。
[不在転送CSSアクティベーションポリシー(Forward All CSS Activation Policy)]
次のオプションのいずれかを入力します。
[パーティ参加トーン(Party Entrance Tone)]
次のいずれかのパーティ参加トーン オプションを入力します。
- [デフォルト(Default)]:Party Entrance Tone サービス パラメータに設定された値を使用します。
- [オン(On)]:基本コールがマルチパーティ コール(割り込みコール、C 割り込みコール、アドホック会議、ミートミー会議、または参加コール)に変わると、電話機でトーンが再生されます。 さらに、通話者がマルチパーティ コールを離れると、別のトーンが再生されます。 制御デバイス、つまりマルチパーティ コールの発信元がビルトイン ブリッジの場合、制御デバイスで [オン(On)] を選択すると、すべての通話者に対してトーンが再生されます。 制御デバイス(たとえば、会議の開催者)がコールに参加しなくなっている場合、または制御デバイスがトーンを再生できない場合は、[オン(On)] が選択されていても、Cisco Unified Communications Manager はトーンを再生しません。
- [オフ(Off)]:基本コールがマルチパーティ コールに変わっても、電話機でトーンは再生されません。
[パークモニタリング転送非取得時の接続先(外部)(Park Monitor Forward No Retrieve Ext Destination)]
パークされている側が外部の場合、パークしたユーザの [パークモニタリング転送非取得時の接続先(外部)(Park Monitoring Forward No Retrieve Destination External)] パラメータに指定された接続先にコールが転送されます。 [転送非取得時の接続先(外部)(Forward No Retrieve Destination External)] フィールドの値が空の場合、パークされた側のコールはパークしたユーザの回線にリダイレクトされます。
[パークモニタリング転送非取得時の接続先(内部)(Park Monitor Forward No Retrieve Int Destination)]
パークされている側が内部の場合、パークしたユーザの [パークモニタリング転送非取得時の接続先(内部)(Park Monitoring Forward No Retrieve Destination Internal)] パラメータに指定された接続先にコールが転送されます。 [転送非取得時の接続先(内部)(Forward No Retrieve Destination Internal)] フィールドの値が空の場合、パークされた側のコールはパークしたユーザの回線にリダイレクトされます。
[未取得時のパークモニタリング転送:内線ボイスメール(Park Monitor Forward No Retrieve Int Voice Mail)]
この設定では、[ボイスメールプロファイルの設定(Voice Mail Profile Configuration)] ウィンドウの設定が使用されます。
この設定では、 Cisco Unified Communications Manager は、[接続先(Destination)] ボックスと [コーリングサーチスペース(Calling Search Space)] の設定値を無視します。
[未取得時のパークモニタリング転送:外部ボイスメール(Park Monitor Forward No Retrieve Ext Voice Mail)]
この設定では、[ボイスメールプロファイルの設定(Voice Mail Profile Configuration)] ウィンドウの設定が使用されます。
この設定では、 Cisco Unified Communications Manager は、[接続先(Destination)] ボックスと [コーリングサーチスペース(Calling Search Space)] の設定値を無視します。
[パークモニタリング転送非取得時のCSS(外部)(Park Monitor Forward No Retrieve Ext CSS)]
電話番号に適用するコーリング サーチ スペースを選択します。
[パークモニタリング転送非取得時のCSS(内部)(Park Monitor Forward No Retrieve Int CSS)]
電話番号に適用するコーリング サーチ スペースを選択します。
[パークモニタリング復帰タイマー(Park Monitor Reversion Timer)]
このパラメータは、ユーザがパークしたコールを取得するようにユーザに求めるまで、 Cisco Unified Communications Manager が待機する秒数を決定します。 このタイマーはユーザが電話の [パーク] ソフトキーを押すと起動し、タイマーの期限が切れるとリマインダが発行されます。
デフォルト:60 秒
ゼロ以外の値を設定すると、[サービスパラメータ(Service Parameters)] ウィンドウに設定されているパラメータの値がこの値で上書きされます。 一方、ここに 0 を設定すると、[サービスパラメータ(Service Parameters)] ウィンドウの値が使用されます。
[不在着信のログを取る(Log Missed Calls)]
このフィールドを使用すると、不在着信のログ機能をオンまたはオフにできます。 「T」を入力すると、 Cisco Unified Communications Manager は電話機でのその電話番号に対する通話履歴に不在着信のログを記録します。 この機能を無効にするには「F」を入力します。
[電話番号のURI(1-5)(URI (1-5) on Directory Number)]
この電話機の電話番号に関連付けるディレクトリ URI を入力します。 「username@host」形式で入力してください。 最大で 47 文字の英数字によるユーザ名を入力します。 ホスト アドレスとして、IPv4 アドレスまたは完全修飾ドメイン名を入力します。 1 つの電話番号に最大 5 つのディレクトリ URI を関連付けることができます。
(注) Cisco Unified CM の管理ページ内では、二重引用符またはカンマが組み込まれたディレクトリ URI を入力できます。 ただし、一括管理を使用して、二重引用符またはカンマが組み込まれたディレクトリ URI を含む CSV ファイルをインポートする場合は、ディレクトリ URI 全体を二重引用符で囲むとともに、組み込まれている二重引用符の前に二重引用符を置いてエスケープ処理する必要があります。 たとえば、「Jared, "Jerry",Smith@test.com」というディレクトリ URI は、CSV ファイルでは「"Jared,""Jerry"",Smith@test.com"」と入力する必要があります。 [電話番号のURI(1-5)ルートパーティション(URI (1-5) Route Partition on Directory Number)]
ディレクトリ URI が属するパーティションを入力します。 ディレクトリ URI へのアクセスを制限しない場合は、フィールドを空白のままにします。
[電話番号ではURI(1-5)がプライマリ(URI (1-5) Is Primary on Directory Number)]
このディレクトリ URI がこの内線のプライマリ ディレクトリ URI であることを示すには、「t」(True)と入力します。 逆に、このディレクトリ URI がこの内線のプライマリ ディレクトリ URI ではないことを示すには、「f」(False)と入力します。
(注) 1 つの電話番号に最大 5 つのディレクトリ URI を関連付けることができますが、1 つのプライマリ ディレクトリ URI を選択する必要があります。
[エンタープライズのローカルルートパーティションへの追加(Enterprise Add to Local Route Partition)]
このエンタープライズ代替番号をローカル ルート パーティションに追加するには、「t」と入力します。 ローカル ルーティングから E.164 番号を除外するには、「f」と入力します。
[エンタープライズのグローバルでのアドバタイズ(Enterprise Advertise via globally)]
ILS でこの代替番号を残りの ILS ネットワークにアドバタイズできるようにするには、「t」と入力します。 ILS でこの番号をアドバタイズしない場合は、「f」と入力します。
[エンタープライズは緊急(Enterprise Is Urgent)]
代替番号のルーティングを緊急と分類するには、「t」と入力します。
デフォルトでは、ダイヤル プランに重複したルート パターンが含まれる場合、桁間タイマーの期限が切れるまで、(ダイヤルされた番号について可能性のあるルートが存在する場合でも)Cisco Unified Communications Manager はコールをルーティングしません。 この設定では、Cisco Unified Communications Manager がダイヤル文字列について利用可能なすべてのルートから最適な一致を選択できるようにすることにより、静的に設定された電話番号および番号パターンと重複した学習番号を防止します。
緊急優先として番号をマークすると、Cisco Unified Communications Manager は桁間タイマーの期限が切れるまで待機することなく(たとえば、T302 タイマー サービス パラメータ)、ダイヤルされた番号と利用可能なルートの間で一致を見つけるとすぐにコールをルーティングします。
[エンタープライズ番号マスク(Enterprise Number Mask)]
電話番号に適用する番号マスクを入力します。 Cisco Unified Communications Manager はマスクを適用して、この電話番号のエイリアスであるエンタープライズ代替番号を作成します。
[エンタープライズルートパーティション(Enterprise Route Partition)]
このエンタープライズ代替番号を割り当てるローカル ルート パーティションを入力します。
[+E.164のローカルルートパーティションへの追加(+E.164 Add to Local Route Partition)]
この E.164 代替番号をローカル ルート パーティションに追加するには、「t」と入力します。 ローカル ルーティングから E.164 番号を除外するには、「f」と入力します。
[+E.164のグローバルでのアドバタイズ(+E.164 Advertise via globally)]
ILS でこの代替番号を残りの ILS ネットワークにアドバタイズできるようにするには、「t」と入力します。 ILS でこの番号をアドバタイズしない場合は、「f」と入力します。
[+E.164 は緊急(+E.164 Is Urgent)]
代替番号のルーティングを緊急と分類するには、「t」と入力します。
デフォルトでは、ダイヤル プランに重複したルート パターンが含まれる場合、桁間タイマーの期限が切れるまで、(ダイヤルされた番号について可能性のあるルートが存在する場合でも)Cisco Unified Communications Manager はコールをルーティングしません。 この設定では、Cisco Unified Communications Manager がダイヤル文字列について利用可能なすべてのルートから最適な一致を選択できるようにすることにより、静的に設定された電話番号および番号パターンと重複した学習番号を防止します。
緊急優先として番号をマークすると、Cisco Unified Communications Manager は桁間タイマーの期限が切れるまで待機することなく(たとえば、T302 タイマー サービス パラメータ)、ダイヤルされた番号と利用可能なルートの間で一致を見つけるとすぐにコールをルーティングします。
[+E.164番号マスク(+E.164 Number Mask)]
電話番号に適用する番号マスクを入力します。 Cisco Unified Communications Manager はマスクを適用して、この電話番号のエイリアスである +E.164 代替番号を作成します。
[+E.164ルートパーティション(+E.164 Route Partition)]
この +E.164 代替番号を割り当てるローカル ルート パーティションを入力します。
[インターコムフィールド(Intercom Fields)](オプション)
[インターコム電話番号(Intercom Directory Number)]
ダイヤル可能な電話番号を入力します。 値は、(.)と(@)を除いた特殊文字、数字、およびルート パターン ワイルドカードを含めることができます。
入力した電話番号は複数のパーティションに現れる可能性があります。
国際的なエスケープ文字 + を使用する場合、電話番号の先頭に「\+」と入力します。 このフィールドの場合、\+ はワイルドカードではありません。\+ はダイヤルされた番号のことです。
[インターコムルートパーティション(Intercom Route Partition)]
電話番号が属するパーティションを入力します。 [インターコム電話番号(Intercom Directory Number)] フィールドに入力する電話番号が、選択したパーティション内で固有のものであることを確認してください。
(注) 電話番号は複数のパーティションに現れる可能性があります。
[説明(Description)]
電話番号およびルート パーティションの説明を入力します。
[呼び出し表示(Alerting Name)]
発信者の電話機で表示する名前を入力します。
この設定は QSIG プロトコルの識別サービスをサポートしていて、共有電話番号および非共有電話番号に適用されます。
[ASCII呼び出し表示(Alerting Name ASCII)]
このフィールドには、[呼び出し表示(Alerting Name)] フィールドと同じ情報を指定します。ただし、入力は ASCII 文字に制限されます。 Unicode(国際化)文字をサポートしないデバイスでは、[ASCII呼び出し表示(Alerting Name ASCII)] フィールドの内容が表示されます。
[インターコム電話番号の設定(Intercom Directory Number Settings)]
[コーリングサーチスペース(Calling Search Space)]
適切なコーリング サーチ スペースを入力します。 コーリング サーチ スペースは、この電話番号からコールが行われる番号を検索するパーティションの集合から構成されています。 選択した値は、この電話番号を使用するすべてのデバイスに適用されます。
[インターコムプレゼンスグループ(Intercom Presence Group)]
この電話番号のプレゼンス グループを入力します。 選択されたグループでは、この電話番号をモニタできるデバイス、エンド ユーザ、およびアプリケーション ユーザが指定されます。
[インターコム表示(Intercom Display)]
このフィールドをブランクにすると、内線番号が表示されます。
最大 30 文字の英数字を使用します。 通常は、ユーザ名または電話番号を使用します(電話番号を使用した場合、コールの受信者に発信者の正確な識別情報が表示されません)。
[インターコムASCII表示(Intercom ASCII Display)]
このフィールドには、[表示(内線発信者ID)(Display (Internal Caller ID))] フィールドと同じ情報を指定します。ただし、入力は ASCII 文字に制限されます。 Unicode(国際化)文字をサポートしないデバイスでは、[ASCII表示(内線発信者ID)(ASCII Display (Internal Caller ID))] フィールドの内容が表示されます。
[インターコム回線のテキストラベル(Intercom Line Text Label)]
このフィールドは、ライン アピアランスにインターコム電話番号を表示しない場合だけ使用します。 回線と電話機の組み合わせに使用されているこの電話番号を識別するためのテキストを入力します。
[インターコムスピードダイヤル(Intercom Speed Dial)]
ユーザがスピード ダイヤル ボタンを押したときにシステムによってダイヤルされる番号を入力します。 0 ~ 9 の数字、*、#、および +(国際的なエスケープ文字)を入力することができます。
[インターコム外線電話番号マスク(Intercom External Phone Number Mask)]
この回線からコールを行うときに発信者 ID 用に送信するために使用される電話番号(またはマスク)を入力します。
最大 24 桁の数字、国際的なエスケープ文字「+」、および文字「X」を入力できます。 X は電話番号を表し、パターンの最後に配置する必要があります。 たとえば、972813XXXX というマスクを指定すると、内線 1234 からの外線コールには発信者 ID 番号 9728131234 が表示されます。
[インターコム発信者名(Intercom Caller Name)]
「T」を入力すると、自動転送時に発信者の名前が表示されるようになります。 「F」を入力すると、表示されません。
[インターコム発信者番号(Intercom Caller Number)]
「T」を入力すると、自動転送時に発信者の番号が表示されるようになります。 「F」を入力すると、表示されません。
[インターコムコール録音オプション(Intercom Call Recording Option)]
次のオプションのいずれかを入力します。
[インターコム録音プロファイル(Intercom Recording Profile)]
エージェントのライン アピアランスでの録音プロファイルを入力します。
[インターコムモニタリング用コーリングサーチスペース(Intercom Monitoring Calling Search Space)]
スーパーバイザのライン アピアランスのモニタリング用コーリング サーチ スペースに、エージェントの回線またはデバイス パーティションを含めてエージェントをモニタできるようにします。
既存のコーリング サーチ スペースを入力します。
デフォルト値は [なし(None)] です。
[自動応答(Auto Answer)]
次のいずれかのオプションを入力して、この電話番号の自動応答機能をアクティブにします。
- [自動応答オフ(Auto Answer Off)](デフォルト)
- [ヘッドセットで自動応答(Auto Answer with Headset)]
- [スピーカフォンで自動応答(Auto Answer with Speakerphone)]
(注) 共有回線を持つデバイスに自動応答を設定しないでください。