この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
目次
この章では、 Cisco Unified Communications Manager 一括管理(BAT)を使用して、 Cisco Unified Communications Manager データベース内の既存のシスコのゲートウェイとポートを追加および更新する方法について説明します。
BAT を使用して、シスコのゲートウェイを Cisco Unified Communications Manager データベースに一括して追加することができます。
VG200 ゲートウェイを Cisco Unified Communications Manager データベースに追加する前に、まず Cisco IOS ソフトウェア コマンドライン インターフェイス(CLI)を使用してゲートウェイを設定する必要があります。 ゲートウェイの設定手順とコマンドについては、ゲートウェイに付属している設定マニュアルを参照してください。
ステップ 1 | Cisco VG200 ゲートウェイ テンプレートを作成して、ゲートウェイとポートのセットに共通の値を定義します。 Cisco VG200 ゲートウェイ テンプレートの作成を参照してください。 |
ステップ 2 | CSV データ ファイルを作成して、追加するゲートウェイとポートごとに個々の値を定義します。 Cisco VG200 ゲートウェイ用 CSV データ ファイルの作成を参照してください。 |
ステップ 3 | ゲートウェイとポートを Cisco Unified Communications Manager データベースに挿入します。 Cisco Unified Communications Manager へのゲートウェイとポートの挿入を参照してください。 |
BAT を使用して、Cisco Catalyst 6000 (FXS) ゲートウェイを Cisco Unified Communications Manager データベースに追加することができます。 また、アナログ デバイス用に、FXS ポートを Cisco Catalyst 6000 (FXS) アナログ インターフェイス モジュールに追加できます。 Gateway Directory Number テンプレートを設定して、これらの FXS ポートおよび Catalyst 6000 (FXS) ポート テンプレートに関連付けしてから、これらのポートを Cisco Unified Communications Manager データベースに追加する必要があります。
Cisco IOS ソフトウェアのコマンドライン インターフェイスを使用して、ゲートウェイを設定します。 設定方法については、ゲートウェイに付属しているマニュアルを参照してください。
Cisco Unified Communications Manager の管理ページを使用して、Cisco Catalyst 6000 ゲートウェイを Cisco Unified Communications Manager データベースに追加します。 Cisco Unified Communications Manager の管理ページで、 の順に選択し、[新規追加(Add New)] をクリックします。 Cisco Catalyst 6000 24 ポート FXS ゲートウェイとデバイス プロトコルを選択して、[次へ(Next)] をクリックします。 詳細については、『Cisco Unified Communications Manager アドミニストレーション ガイド』を参照してください。
ステップ 1 | Cisco Catalyst 6000 (FXS) ゲートウェイ テンプレートを作成します。 Cisco Catalyst 6000(FXS)ゲートウェイ テンプレートの作成を参照してください。 |
ステップ 2 | FXS ポートのセットに共通の値を定義するために、Cisco Catalyst 6000 (FXS) ポート テンプレートを作成します。 FXS/FXO ポート設定のフィールドの説明を参照してください。 |
ステップ 3 | 追加する FXS ポート用に個々の値を定義するために、CSV データ ファイルを作成します。 Cisco Catalyst 6000(FXS)ポート用 CSV データ ファイルの作成を参照してください。 |
ステップ 4 | ゲートウェイとポートを Cisco Unified Communications Manager データベースに挿入します。 Cisco Unified Communications Manager へのゲートウェイとポートの挿入を参照してください。 |
VG224 ゲートウェイを Cisco Unified Communications Manager データベースに追加する前に、まず Cisco IOS ソフトウェア コマンドライン インターフェイス(CLI)を使用してゲートウェイを設定する必要があります。 ゲートウェイの設定手順とコマンドについては、ゲートウェイに付属している設定マニュアルを参照してください。
ステップ 1 | Cisco VG224 ゲートウェイ テンプレートを作成して、ゲートウェイとポートのセットに共通の値を定義します。 Cisco VG224 ゲートウェイ テンプレートの作成を参照してください。 |
ステップ 2 | CSV データ ファイルを作成して、追加するゲートウェイとポートごとに個々の値を定義します。 Cisco VG224 ゲートウェイとポートの CSV データ ファイルの作成を参照してください。 |
ステップ 3 | ゲートウェイとポートを Cisco Unified Communications Manager データベースに挿入します。 Cisco Unified Communications Manager へのゲートウェイとポートの挿入を参照してください。 |
Cisco VG202 または VG204 ゲートウェイとポートを Cisco Unified Communications Manager に挿入する手順は、次のとおりです。
VG202 または VG204 ゲートウェイを Cisco Unified Communications Manager データベースに追加する前に、まず Cisco IOS ソフトウェア コマンドライン インターフェイス(CLI)を使用してゲートウェイを設定する必要があります。 ゲートウェイの設定手順とコマンドについては、ゲートウェイに付属している設定マニュアルを参照してください。
ステップ 1 | シスコのゲートウェイのテンプレートを作成して、ゲートウェイとポートのセットに共通の値を定義します。 Cisco VG202 または VG204 ゲートウェイ テンプレートの作成を参照してください。 |
ステップ 2 | CSV データ ファイルを作成して、追加するゲートウェイとポートごとに個々の値を定義します。 Cisco VG202 および VG204 ゲートウェイ用 CSV データ ファイルの作成を参照してください。 |
ステップ 3 | ゲートウェイとポートを Cisco Unified Communications Manager データベースに挿入します。 Cisco Unified Communications Manager へのゲートウェイとポートの挿入を参照してください。 |
複数のゲートウェイ テンプレートに対応できるように、 Cisco Unified Communications Manager では、一定の検索条件に基づいて特定のテンプレートを探し出すことができます。 テンプレートを見つける手順は、次のとおりです。
(注) |
ブラウザ セッションの作業中、検索/一覧表示の検索プリファレンスはクライアント マシンのクッキーに格納されます。 別のメニュー項目に移動してからこのメニュー項目に戻った場合、またはブラウザを閉じてから新しいブラウザ ウィンドウを再度開いた場合、検索を変更するまで Cisco Unified Communications Manager 検索プリファレンスが維持されます。 |
BAT を使用して、VG200、VG202、VG204、VG224、または Cisco Catalyst 6000 (FXS) ゲートウェイ テンプレートを追加または編集します。
ステップ 1 |
[一括管理(Bulk Administration)][ゲートウェイ(Gateways)][ゲートウェイテンプレート(Gateway Template)] の順に選択します。 [ゲートウェイテンプレートの検索/一覧表示(Find and List Gateway Template)] ウィンドウが表示されます。
|
ステップ 2 |
次のいずれかの手順を完了します。
|
ステップ 1 | [ゲートウェイの検索/一覧表示(Find and List Gateway)] の順に選択します。 ウィンドウが表示されます。 |
ステップ 2 | [新規追加(Add New)] をクリックします。 [新規ゲートウェイを追加(Add a New Gateway)] ウィンドウが表示されます。 |
ステップ 3 | [ゲートウェイタイプ(Gateway Type)] ドロップダウン リスト ボックスから、[Cisco VG200] を選択し、[次へ(Next)] をクリックします。 [ゲートウェイの設定(Gateway Configuration)] ウィンドウが表示されます。 |
ステップ 4 | すべてのフィールドに値を入力します。 VG200 ゲートウェイ テンプレートのフィールドの説明を参照してください。 |
ステップ 5 | [保存(Save)] をクリックします。 挿入が完了すると、新しいフィールドがペインに表示されます。 |
ステップ 6 |
[サブユニット(Subunit)] フィールドで、次の各サブユニット フィールドに適切なタイプを選択します。
|
ステップ 7 | [保存(Save)] をクリックします。 更新が完了したことが [ステータス(Status)] によって示されると、[サブユニット(Subunit)] ドロップダウン リスト ボックスの右側にエンドポイント ID がリンクとして表示されます。 |
ステップ 8 |
エンドポイント ID(たとえば、1/0/0)をクリックして、デバイス プロトコル情報を設定し、取り付けられている VIC のタイプ用のポートを追加します。 詳細については、次の手順を参照してください。 |
ステップ 9 | [リセット(Reset)] をクリックして、ゲートウェイをリセットし、変更内容を適用します。 |
必要に応じて、エンドポイント情報とポートを引き続き設定します。
VG200 ゲートウェイに関して設定できるデバイス プロトコルおよびポート タイプは、インストールされた音声インターフェイス カードのタイプによって異なります。
Foreign Exchange Station(FXS)ポートは、任意の POTS デバイスとの接続に使用できます。 VG200 ゲートウェイ テンプレートに FXS ポートを追加する手順は、次のとおりです。
ポートを設定する前に、VG200 ゲートウェイ テンプレートを追加する必要があります。 詳細については、Cisco VG200 ゲートウェイ テンプレートの作成を参照してください。
ステップ 1 | FXS ポートを追加するゲートウェイ テンプレートを検索します。 | ||
ステップ 2 | [ゲートウェイテンプレートの設定(Gateway Template Configuration)] ウィンドウから、設定する FXS VIC のエンドポイント ID をクリックします。 ウィンドウが更新され、[ゲートウェイテンプレートの設定(Gateway Template Configuration)] ウィンドウにエンドポイントのアイコンが表示されます。 | ||
ステップ 3 |
[デバイス情報(Device Information)] と [ポート情報(Port Information)] に適切な設定値を入力し、[保存(Save)] をクリックします。
|
||
ステップ 4 | [新規DNを追加(Add a new DN)] をクリックして、POTS ポートに電話番号を追加します。または、別のタイプのポートを設定した場合は、ステップ 6 に進んでください。 | ||
ステップ 5 | ポートを追加した VG200 ゲートウェイの [ゲートウェイテンプレートの設定(Gateway Template Configuration)] メイン ウィンドウに戻るには、[関連リンク(Related Links)] ドロップダウン リスト ボックスで [MGCP設定に戻る(Back to MGCP Configuration)] を選択し、[移動(Go)] をクリックします。 | ||
ステップ 6 | [リセット(Reset)] をクリックして、ゲートウェイをリセットし、変更内容を適用します。 | ||
ステップ 7 | ステップ 1 ~ステップ 5 を繰り返して、他の FXS ポートを追加します。 |
Foreign Exchange Office(FXO)ポートは、セントラル オフィスまたは PBX との接続に使用されます。 BAT を使用して、VG200 ゲートウェイ テンプレートにループ スタートまたはグラウンド スタート用の FXO ポートを追加し、設定することができます。
(注) |
Cisco Unified Communications Manager は、すべてのループ スタート トランクには、Positive Disconnect Supervision(確実な接続解除監視)がないものと想定します。 Cisco Unified Communications Manager サーバのフェイルオーバー時にアクティブ コールを保持できるように、確実な接続解除監視を備えたトランクを、グラウンド スタートとして設定してください。 |
ポートを設定する前に、VG200 ゲートウェイ テンプレートを追加する必要があります。 詳細については、Cisco VG200 ゲートウェイ テンプレートの作成を参照してください。
ステップ 1 | FXS ポートを追加するゲートウェイ テンプレートを検索します。 | ||
ステップ 2 | [ゲートウェイの設定(Gateway Configuration)] ウィンドウから、設定する FXO ポートのエンドポイント ID をクリックします。 | ||
ステップ 3 |
[ポートタイプ(Port Type)] ドロップダウン リスト ボックスから、[Ground Start] か [Loop Start] のどちらかを選択します。
|
||
ステップ 4 | [ゲートウェイの設定(Gateway Configuration)] と [ポート情報(Port Information)] に適切な設定値を入力し、[保存(Save)] をクリックします。 フィールドの説明については、FXS/FXO ポート設定のフィールドの説明を参照してください。 | ||
ステップ 5 | ポートを追加したゲートウェイの VG200 ゲートウェイ設定のメイン ウィンドウに戻るには、[関連リンク(Related Links)] ドロップダウン リスト ボックスで [MGCP設定に戻る(Back to MGCP Configuration)] を選択し、[移動(Go)] をクリックします。 | ||
ステップ 6 | [リセット(Reset)] をクリックして、ゲートウェイをリセットし、変更内容を適用します。 | ||
ステップ 7 | 他の FXO ポートを追加するには、ステップ 2 ~ステップ 4 を繰り返します。 |
BAT を使用して、VG200 ゲートウェイ テンプレートに Digital Access T1(T1-CAS)ポートを追加することができます。
ステップ 1 | FXS ポートを追加するゲートウェイ テンプレートを検索します。 |
ステップ 2 |
[ゲートウェイの設定(Gateway Configuration)] ウィンドウから、設定する Digital Access T1(T1-CAS)ポートのエンドポイント ID をクリックします。 [デバイスプロトコル(Device Protocol)] ドロップダウン リスト ボックスで、[デジタルアクセスT1(Digital Access T1)] を選択し、[次へ(Next)] をクリックします。 |
ステップ 3 | 適切なゲートウェイの設定値を入力し、[保存(Save)] をクリックします。 詳細については、Cisco VG200 ゲートウェイ テンプレート上の Digital Access T1 トランクのフィールドの説明を参照してください。 |
ステップ 4 | [リセット(Reset)] をクリックして、ゲートウェイをリセットし、変更内容を適用します。 |
ステップ 5 | 選択するポート タイプの適切な設定値については、ポートの設定を参照してください。 |
BAT を使用して、VG200 ゲートウェイ テンプレートに T1 PRI または E1 PRI デバイスを追加することができます。
ステップ 1 | FXS ポートを追加するゲートウェイ テンプレートを検索します。 |
ステップ 2 | [ゲートウェイの設定(Gateway Configuration)] ウィンドウから、設定する T1 PRI または E1 PRI ポートのエンドポイント ID をクリックします。 |
ステップ 3 | T1 PRI または E1 PRI デバイス プロトコルの設定値を設定します。 フィールドの説明については、Cisco VG200 ゲートウェイ テンプレート上の T1 PRI または E1 PRI トランクのフィールドの説明を参照してください。 |
ステップ 4 | [保存(Save)] をクリックします。 |
ステップ 5 | [リセット(Reset)] をクリックして、ゲートウェイをリセットし、変更内容を適用します。 |
BAT を使用して、Cisco Catalyst 6000 FXS ゲートウェイ テンプレートを作成します。 注釈がない限り、すべてのフィールドに入力する必要があります。
ステップ 1 | [ゲートウェイの検索/一覧表示(Find and List Gateway)] の順に選択します。 ウィンドウが表示されます。 |
ステップ 2 | [新規追加(Add New)] をクリックします。 [新規ゲートウェイを追加(Add a New Gateway)] ウィンドウが表示されます。 |
ステップ 3 | [ゲートウェイタイプ(Gateway Type)] ドロップダウン リスト ボックスから、[Cisco Catalyst 6000 24 Port FXS Gateway] を選択します。 [ゲートウェイの設定(Gateway Configuration)] ウィンドウが表示されます。 |
ステップ 4 | [テンプレート名(Template Name)] フィールドに、このテンプレートの固有の名前を入力します。 |
ステップ 5 | フィールドに設定値を入力し、[保存(Save)] をクリックします。 フィールドの説明については、Cisco Catalyst 6000 24 ポート FXS ゲートウェイ テンプレートのフィールドの説明を参照してください。 |
ステップ 6 | [新規ポートを追加(Add a New Port)] をクリックします。 別のウィンドウに、ポート設定のダイアログが開きます。 |
ステップ 7 | ドロップダウン リスト ボックスから、設定するゲートウェイ モデルに基づくポート タイプとして [POTS] を選択します。 フィールドの説明については、Cisco VG200 ゲートウェイ テンプレート上の T1 PRI または E1 PRI トランクのフィールドの説明を参照してください。 |
ステップ 8 | 適切なポートの設定値を入力し、[保存(Save)] をクリックします。 フィールドの説明については、POTS ポートの設定を参照してください。 POTS ポートを追加した場合、ウィンドウの内容が更新され、ウィンドウの左側のリストに、その POTS ポートが表示されます。 新しいポートの右側に、[DNを追加(Add DN)] リンクが表示されます。 |
ステップ 9 | FXS ポートに電話番号を追加するには、[DNの追加(Add DN)] をクリックします。 |
ステップ 10 | [保存(Save)] をクリックします。 更新が完了したことが [ステータス(Status)] に示されると、[ゲートウェイの検索/一覧表示(Find and List Gateways)] ウィンドウにテンプレートが表示されます。 [検索/一覧表示(Find and List)] ウィンドウに戻るには、ウィンドウの右上隅にある [関連リンク(Related Links)] ドロップダウン リスト ボックスから、[検索/一覧表示に戻る(Back to Find and List)] を選択します。 |
ステップ 1 |
の順に選択します。 [ゲートウェイの検索/一覧表示(Find and List Gateway)] ウィンドウが表示されます。 |
ステップ 2 | [新規追加(Add New)] をクリックします。 [新規ゲートウェイを追加(Add a New Gateway)] ウィンドウが表示されます。 |
ステップ 3 | [ゲートウェイタイプ(Gateway Type)] ドロップダウン リスト ボックスから、[Cisco VG224] を選択し、[次へ(Next)] をクリックします。 次の[新規ゲートウェイの追加(Add a New Gateway)] ウィンドウが表示されます。 |
ステップ 4 | [プロトコル(Protocol)] ドロップダウン リスト ボックスから、MGCP または SCCP を選択し、[次へ(Next)] をクリックします。 [ゲートウェイの設定(Gateway Configuration)] ウィンドウが表示されます。 |
ステップ 5 | すべてのフィールドに値を入力し、[保存(Save)] をクリックします。 フィールドの説明については、VG224 ゲートウェイ テンプレートのフィールドの説明を参照してください。 挿入が完了すると、新しいフィールドがペインに表示されます。 |
ステップ 6 | [サブユニット0(Subunit 0)] フィールドで、サブユニット フィールドに適切なタイプをドロップダウン リスト ボックスから選択し、[保存(Save)] をクリックします。 更新が完了したことが [ステータス(Status)] によって示されると、[サブユニット(Subunit)] ドロップダウン リスト ボックスの右側にエンドポイント ID がリンクとして表示されます。 |
ステップ 7 | エンドポイント ID(たとえば、1/0/0)をクリックして、デバイス プロトコル情報を設定し、取り付けられている VIC のタイプ用のポートを追加します。 |
ステップ 8 | [リセット(Reset)] をクリックして、ゲートウェイをリセットし、変更内容を適用します。 |
必要に応じて、エンドポイント情報とポートを引き続き設定します。
BAT を使用して、VG224 ゲートウェイ テンプレートに FXS ポートを追加します。 Foreign Exchange Station(FXS)ポートは、POTS デバイスとの接続に使用されます。
ステップ 1 | FXS ポートを追加するゲートウェイ テンプレートを検索します。 | ||
ステップ 2 | [ゲートウェイテンプレートの設定(Gateway Template Configuration)] ウィンドウから、設定する FXS VIC のエンドポイント ID をクリックします。 ウィンドウが更新され、[ゲートウェイテンプレートの設定(Gateway Template Configuration)] ウィンドウにエンドポイントのアイコンが表示されます。 | ||
ステップ 3 |
[デバイス情報(Device Information)] と [ポート情報(Port Information)] に適切な設定値を入力し、[保存(Save)] をクリックします。
|
||
ステップ 4 | [新規DNを追加(Add a new DN)] をクリックして、POTS ポートに電話番号を追加します。または、別のタイプのポートを設定した場合は、ステップ 6 に進んでください。 | ||
ステップ 5 | ポートを追加した VG224 ゲートウェイの [ゲートウェイテンプレートの設定(Gateway Template Configuration)] メイン ウィンドウに戻るには、[関連リンク(Related Links)] ドロップダウン リスト ボックスで [MGCP設定に戻る(Back to MGCP Configuration)] を選択し、[移動(Go)] をクリックします。 | ||
ステップ 6 | [リセット(Reset)] をクリックして、ゲートウェイをリセットし、変更内容を適用します。 | ||
ステップ 7 | さらに FXS ポートを追加するには、ステップ 1~ステップ 5を繰り返します。 |
ステップ 1 |
の順に選択します。 [ゲートウェイの検索/一覧表示(Find and List Gateway)] ウィンドウが表示されます。 |
ステップ 2 | [新規追加(Add New)] をクリックします。 [新規ゲートウェイを追加(Add a New Gateway)] ウィンドウが表示されます。 |
ステップ 3 | [ゲートウェイタイプ(Gateway Type)] ドロップダウン リスト ボックスから、[Cisco VG202] または [VG204] を選択し、[次へ(Next)] をクリックします。 次の[新規ゲートウェイの追加(Add a New Gateway)] ウィンドウが表示されます。 |
ステップ 4 | [プロトコル(Protocol)] ドロップダウン リスト ボックスから、MGCP または SCCP を選択し、[次へ(Next)] をクリックします。 [ゲートウェイの設定(Gateway Configuration)] ウィンドウが表示されます。 |
ステップ 5 | すべてのフィールドに値を入力し、[保存(Save)] をクリックします。 フィールドの説明については、VG202 および VG204 ゲートウェイ テンプレートのフィールドの説明を参照してください。 挿入が完了すると、新しい [サブユニット0(Subunit 0)] フィールドがペインに表示されます。 |
ステップ 6 | [サブユニット0(Subunit 0)] フィールドで、サブユニット フィールドに適切なタイプをドロップダウン リスト ボックスから選択し、[保存(Save)] をクリックします。 更新が完了したことが [ステータス(Status)] によって示されると、[サブユニット(Subunit)] ドロップダウン リスト ボックスの右側にエンドポイント ID がリンクとして表示されます。 |
ステップ 7 | エンドポイント ID (たとえば、0/0)をクリックし、デバイス プロトコル情報を設定し、インストールした VIC タイプのポートを追加します。 |
ステップ 8 | [リセット(Reset)] をクリックして、ゲートウェイをリセットし、変更内容を適用します。 |
必要に応じて、エンドポイント情報とポートを引き続き設定します。
BAT を使用して、VG202 または VG204 ゲートウェイ テンプレートに FXS ポートを追加します。 Foreign Exchange Station(FXS)ポートは、任意の POTS デバイスとの接続に使用できます。
ポートを設定する前に、VG202 または VG204 ゲートウェイ テンプレートを追加する必要があります。 詳細については、Cisco VG202 または VG204 ゲートウェイ テンプレートの作成を参照してください。
ステップ 1 | FXS ポートを追加するゲートウェイ テンプレートを検索します。 | ||
ステップ 2 | [ゲートウェイテンプレートの設定(Gateway Template Configuration)] ウィンドウから、設定する FXS VIC のエンドポイント ID をクリックします。 ウィンドウが更新され、[ゲートウェイテンプレートの設定(Gateway Template Configuration)] ウィンドウにエンドポイントのアイコンが表示されます。 | ||
ステップ 3 |
[デバイス情報(Device Information)] と [ポート情報(Port Information)] に適切な設定値を入力し、[保存(Save)] をクリックします。
|
||
ステップ 4 | [新規DNを追加(Add a new DN)] をクリックして、POTS ポートに電話番号を追加します。または、別のタイプのポートを設定した場合は、ステップ 6 に進んでください。 | ||
ステップ 5 | ポートを追加した VG202 または VG204 ゲートウェイの [ゲートウェイテンプレートの設定(Gateway Template Configuration)] メイン ウィンドウに戻るには、[関連リンク(Related Links)] ドロップダウン リスト ボックスで [MGCP設定に戻る(Back to MGCP Configuration)] を選択し、[移動(Go)] をクリックします(MGCP ゲートウェイを設定している場合)。 | ||
ステップ 6 | [リセット(Reset)] をクリックして、ゲートウェイをリセットし、変更内容を適用します。 | ||
ステップ 7 | ステップ 2 ~ステップ 5 を繰り返して、他の FXS ポートを追加します。 |
BAT を使用して追加または更新できる、シスコでサポートされるすべてのゲートウェイとポートについては、詳細なフィールドの説明を参照してください。
次の表に、VG200 ゲートウェイ テンプレート設定の詳細な説明があります。
フィールド |
説明 |
||||
---|---|---|---|---|---|
[テンプレート名(Template name)] |
Cisco VG200 ゲートウェイ テンプレートを識別する最大 64 文字の名前を入力します。 |
||||
[説明(Description)] |
デバイスの目的を明確にした説明を入力します。 |
||||
[Cisco Unified CMグループ( Cisco Unified Communications Manager Group)] |
ドロップダウン リスト ボックスで、 Cisco Unified Communications Manager 冗長グループを選択します。 Cisco Unified Communications Manager 冗長グループには、最大 3 つの Cisco Unified Communications Manager を優先順に並べたリストが含まれています。 リスト内の最初の Cisco Unified Communications Manager は、プライマリ Cisco Unified Communications Manager になります。 プライマリ Cisco Unified Communications Manager が使用できないか、障害が起きた場合、ゲートウェイは、リスト内の次の Cisco Unified Communications Manager に接続しようとします。 |
||||
[設定済みのスロット、VICおよびエンドポイント(Configured Slots, VICs and Endpoints)]
|
|||||
[スロット1のモジュール(Module in Slot 1)] |
VG200 ゲートウェイで使用可能なスロットの場合は、次のモジュール タイプから選択します。
|
||||
[プロダクト固有の設定(Product Specific Configuration)] |
|||||
(ゲートウェイ メーカーによって指定される、モデル固有の設定フィールド) |
[プロダクト固有の設定(Product Specific Configuration)] の下にあるモデル固有のフィールドは、ゲートウェイ メーカーによって指定されます。 これらのフィールドは動的に設定されるため、予告なく変更される場合があります。 フィールドの説明とプロダクト固有の設定項目のヘルプを表示するには、[プロダクト固有の設定(Product Specific Configuration)] 見出しの右側にある情報アイコン [?] をクリックして、ポップアップ ダイアログ ボックスでヘルプを表示します。 詳細な情報が必要な場合は、設定するゲートウェイのマニュアルを参照するか、製造元に連絡してください。 |
次の表に、VG224 ゲートウェイ テンプレート設定の詳細な説明があります。
フィールド |
説明 |
||
---|---|---|---|
[テンプレート名(Template name)] |
Cisco VG224 ゲートウェイ テンプレートを識別する最大 64 文字の名前を入力します。 |
||
[説明(Description)] |
デバイスの目的を明確にした説明を入力します。 |
||
[Cisco Unified CMグループ( Cisco Unified Communications Manager Group)] |
ドロップダウン リスト ボックスで、 Cisco Unified Communications Manager 冗長グループを選択します。 Cisco Unified Communications Manager 冗長グループには、最大 3 つの Cisco Unified Communications Manager を優先順に並べたリストが含まれています。 リスト内の最初の Cisco Unified Communications Manager は、プライマリ Cisco Unified Communications Manager になります。 プライマリ Cisco Unified Communications Manager が使用できないか、障害が起きた場合、ゲートウェイは、リスト内の次の Cisco Unified Communications Manager に接続しようとします。 |
||
[設定済みのスロット、VICおよびエンドポイント(Configured Slots, VICs and Endpoints)] |
|||
[スロット2のモジュール(Module in Slot 2)] |
VG224 ゲートウェイで使用可能なスロットに対し、ドロップダウン リスト ボックスから [ANALOG] を選択します。 |
||
[サブユニット0(Subunit 0)] |
VG224 ゲートウェイで使用可能なサブユニット 0 に対し、ドロップダウン リスト ボックスから [24FXS] をサブユニットとして選択します。
|
次の表に、VG202 と VG204 ゲートウェイ テンプレート設定の詳細な説明があります。
フィールド |
説明 |
||
---|---|---|---|
[テンプレート名(Template name)] |
Cisco VG202 または VG204 ゲートウェイ テンプレートを識別する最大 64 文字の名前を入力します。 |
||
[説明(Description)] |
デバイスの目的を明確にした説明を入力します。 |
||
[Cisco Unified CMグループ( Cisco Unified Communications Manager Group)] |
ドロップダウン リスト ボックスで、 Cisco Unified Communications Manager 冗長グループを選択します。 Cisco Unified Communications Manager 冗長グループには、最大 3 つの Cisco Unified Communications Manager を優先順に並べたリストが含まれています。 リスト内の最初の Cisco Unified Communications Manager は、プライマリ Cisco Unified Communications Manager になります。 プライマリ Cisco Unified Communications Manager が使用できないか、障害が起きた場合、ゲートウェイは、リスト内の次の Cisco Unified Communications Manager に接続しようとします。 |
||
[設定済みのスロット、VICおよびエンドポイント(Configured Slots, VICs and Endpoints)] |
|||
[スロット0のモジュール(Module in Slot 0)] |
VG202 または VG204 ゲートウェイで使用可能なスロットに対し、ドロップダウン リスト ボックスから [ANALOG] を選択します。 |
||
[サブユニット0(Subunit 0)] |
VG202 または VG204 ゲートウェイで使用可能なサブユニット 0 に対し、ドロップダウン リスト ボックスから [2FXS] をサブユニットとして選択します。
|
次の表に、Cisco Catalyst 6000 24 ポート FXS ゲートウェイ テンプレートの設定を示します。
フィールド |
説明 |
||
---|---|---|---|
[説明(Description)] |
デバイスの目的を入力します。 説明には、任意の言語で最大 50 文字を指定できますが、二重引用符(")、パーセント記号(%)、アンパサンド(&)、バックスラッシュ(\)、山カッコ(<>)は使用できません。 |
||
[デバイスプール(Device Pool)] |
ドロップダウン リスト ボックスから、適切なデバイス プールを選択します。 デバイス プールは、このデバイスのプロパティの集合(たとえば、Cisco Unified Communications Manager グループ、日付/時刻グループ、地域、およびデバイスの自動登録用のコーリング サーチ スペース)を指定します。 |
||
[共通デバイス設定(Common Device Configuration)] |
このゲートウェイに割り当てる共通デバイス設定を選択します。 共通デバイス設定には、特定のユーザに関連付けられた属性(サービスまたは機能)が含まれています。 [共通デバイス設定(Common Device Configuration)] ウィンドウで共通のデバイス設定を行います。 共通デバイス設定の詳細については、『Cisco Unified Communications Manager アドミニストレーション ガイド』を参照してください。 共通デバイス設定の設定値を参照するには、[詳細の表示(View Details)] リンクをクリックします。 |
||
[メディアリソースグループリスト(Media Resource Group List)] |
メディア リソース グループを優先順に並べたグループが表示されます。 アプリケーションは、メディア リソース グループ リストで定義された優先順位に従って、使用可能なメディア リソースから、必要なメディア リソース、たとえば、保留音サーバを選択します。 |
||
[ネットワーク保留MOH音源(Network Hold MOH Audio Source)] |
このグループの IP ゲートウェイのネットワーク保留オーディオ ソースを選択します。 ネットワーク保留オーディオ ソースは、システムがコールを保留にするとき(たとえば、ユーザがコールを転送したときや、コール パークにしたとき)に再生される音楽のオーディオ ソースを特定します。 |
||
[コーリングサーチスペース(Calling Search Space)] |
ドロップダウン リスト ボックスから、適切なコーリング サーチ スペースを選択します。 コーリング サーチ スペースは、収集された(発信)番号のルート指定方法を決定するために検索されるパーティションの集合を指定します。 Max List Box Items エンタープライズ パラメータを使用して、このドロップダウン リスト ボックスで表示するコーリング サーチ スペースの数を設定できます。 Max List Box Items エンタープライズ パラメータで指定するより多くのコーリング サーチ スペースが存在する場合は、ドロップダウン リスト ボックスの横に省略記号のボタン(...)が表示されます。 [...] ボタンをクリックすると、[コーリングサーチスペースの選択(Select Calling Search Space)] ウィンドウが表示されます。 [名前に次を含む項目を表示(List items where Name contains)] フィールドに、コーリング サーチ スペース名の一部を入力します。 [使用する項目を選択(Select item to use)] ボックスに表示されるコーリング サーチ スペースのリストで、目的のコーリング サーチ スペース名をクリックし、[OK] をクリックします。
|
||
[AARコーリングサーチスペース(AAR Calling Search Space)] |
自動代替ルーティング(AAR)の実行時にデバイスが使用するコーリング サーチ スペースを選択します。 AAR コーリング サーチ スペースは、帯域幅不足によってコールがブロックされないように、収集された(発信)番号のルーティング方法を決定するために検索されるルート パーティションの集合を指定します。 |
||
[ロケーション(Location)] |
このデバイスの適切なロケーションを選択します。 ロケーションは、このロケーションとの間のコールに使用可能な帯域幅の合計を指定します。 ロケーションを [なし(None)] に設定すると、ロケーション機能がこのデバイスの消費する帯域幅を管理しないことを示します。 |
||
[AARグループ(AAR Group)] |
このデバイスの自動代替ルーティング(AAR)グループを選択します。 AAR グループは、帯域幅不足のためにコールがブロックされないように、コールをルーティングするためのプレフィックス番号を提供します。 AAR グループ設定を [なし(None)] にすると、ブロックされたコールの再ルーティングは行われません。 |
||
[ネットワークロケール(Network Locale)] |
ドロップダウン リスト ボックスから、そのゲートウェイに関連したロケールを選択します。 そのネットワーク ロケールは、特定ロケーションのハードウェアをサポートする一連の詳細情報を識別します。 ネットワーク ロケールには、特定の地域でデバイスが使用するトーンおよび断続周期の定義が含まれています。
|
||
[信頼されたリレーポイントを使用(Use Trusted Relay Point)] |
ドロップダウン リスト ボックスで、 Cisco Unified Communications Manager が信頼されたリレーポイント(TRP)のデバイスをこのメディア エンドポイントで挿入するかどうかについて、有効化または無効化を指定します。 次のいずれかの値を選択します。
信頼されたリレー ポイント(TRP)デバイスには、Trusted Relay Point というラベルの付いた MTP またはトランスコーダ デバイスが指定されます。 エンドポイントに複数のリソース(たとえば、トランスコーダや RSVP エージェント)が必要な場合は、 Cisco Unified Communications Manager により、TRP は関連付けられたエンドポイント デバイスに最も近い位置に配置されます。 エンドポイントに TRP と MTP の両方が必要な場合、TRP は必須の MTP として使用されます。 コールの動作の詳細については、『 Cisco Unified Communications Manager システム ガイド』で TRP の挿入に関する要件の説明を参照してください。 |
||
[ポート選択順序(Port Selection Order)] |
ポートが選択される順序を選択します。 どちらのポート順序を使用すべきかわからない場合は、[上から(TOP_DOWN)] を選択してください。 |
||
[ロード情報(Load Information)] |
ゲートウェイに適切なファームウェア ロード情報を入力します。 このフィールドに入力された値は、このゲートウェイのデフォルト値を上書きします。 |
||
[発呼側名にUTF-8を転送(Transmit UTF-8 for Calling Party Name)] |
このデバイスは、デバイスのデバイス プールのロケール設定を使用して、Unicode を送信するかどうか、および受信した Unicode 情報を変換するかどうかを決定します。 送信デバイスでは、このチェックボックスをオンにした場合に、デバイスのデバイス プールのユーザ ロケール設定が着信側電話機のユーザ ロケール設定に一致すると、デバイスは Unicode を送信します。 ユーザ ロケール設定が一致しない場合、デバイスは ASCII を送信します。 受信デバイスは、送信デバイスのデバイス プールのユーザ ロケール設定に基づいて、着信する Unicode 文字を変換します。 ユーザ ロケール設定が着信側電話機のユーザ ロケールに一致した場合、電話機には文字が表示されます。
|
||
[発呼側トランスフォーメーションCSS(Calling Party Transformation CSS)] |
この設定により、デバイスの発呼側の番号をローカライズできるようになります。 選択する発呼側トランスフォーメーション CSS に、このデバイスに割り当てる発呼側トランスフォーメーション パターンが含まれていることを確認してください。 発呼側トランスフォーメーション CSS が存在するパーティションにパターンを割り当てる場合、デバイスは発呼側トランスフォーメーション パターンの属性を使用します。 設定情報の詳細については、『 Cisco Unified Communications Manager 機能およびサービス ガイド』を参照してください。 |
||
[デバイスプールの発呼側トランスフォーメーションCSSを使用(Use Device Pool Calling Party Transformation CSS)] |
デバイスに割り当てられているデバイス プールで設定された発呼側トランスフォーメーション CSS を使用するには、このチェックボックスをオンにします。 このチェックボックスをオフにすると、デバイスは、デバイスの設定ウィンドウで設定された発呼側トランスフォーメーション CSS を使用します。 |
||
[MLPP情報(Multilevel Precedence and Preemption (MLPP) Information)] |
|||
[MLPPドメイン(MLPP Domain)] |
ドロップダウン リスト ボックスから、このデバイスに関連付ける MLPP ドメインを選択します。 この値を [<なし(None)>] のままにすると、このデバイスはデバイスのデバイス プールに設定された値から MLPP ドメインを継承します。 デバイス プールに MLPP ドメインの設定がない場合、このデバイスの MLPP ドメインは、MLPP Domain Identifier エンタープライズ パラメータに設定された値から継承されます。 |
||
[MLPP通知(MLPP Indication)] |
このデバイス タイプには、この設定はありません。 |
||
[MLPPプリエンプション(MLPP Preemption)] |
このデバイス タイプには、この設定はありません。 |
||
[位置情報の設定(Geo Location Configuration)] |
|||
[位置情報(Geo Location)] |
ドロップダウン リスト ボックスから、位置情報を選択します。 未指定の位置情報を選択できます。これは、このデバイスを位置情報に関連付けないことを示します。 メニュー オプションで設定された位置情報を選択することもできます。 |
||
[位置情報フィルタ(Geo Location Filter)] |
ドロップダウン リスト ボックスから、位置情報フィルタを選択します。 この値を [<なし(None)>] のままにすると、このデバイスには位置情報フィルタは適用されません。 メニュー オプションで設定した位置情報フィルタを選択することもできます。 |
次の表で、FXS/FXO ポートの設定について詳しく説明します。
VG200 ゲートウェイの場合、すべてのスイッチ エミュレーション タイプが、ネットワーク側をサポートしているわけではありません。 ゲートウェイ スイッチ タイプの設定内容によって、ネットワーク側を設定できるかどうかが決まります。
フィールド |
説明 |
||
---|---|---|---|
[デバイス情報(Device Information)] |
|||
[エンドポイント名(End-Point Name)] |
VG200 ゲートウェイの場合、ここは表示専用フィールドです。 Cisco Unified Communications Manager が生成する、VG200 アナログ インターフェイスを一意に識別する文字列が表示されます。 |
||
[説明(Description)] |
Cisco Unified Communications Manager は、アナログ MGCP の説明を一意に識別する文字列を生成します。 次の例を参考にしてください。 AALN/S0/SU1/1@domain.com このフィールドは、編集可能です。 説明には、任意の言語で最大 50 文字を指定できますが、二重引用符(")、パーセント記号(%)、アンパサンド(&)、バックスラッシュ(\)、山カッコ(<>)は使用できません。 |
||
[デバイスプール(Device Pool)] |
ドロップダウン リスト ボックスから、適切なデバイス プールを選択します。 デバイス プールは、このデバイスのプロパティの集合(たとえば、Communications Manager グループ、日付/時刻グループ、地域、およびデバイスの自動登録用のコーリング サーチ スペース)を指定します。 |
||
[メディアリソースグループリスト(Media Resource Group List)] |
メディア リソース グループを優先順に並べたグループが表示されます。 アプリケーションは、メディア リソース グループ リストで定義された優先順位に従って、使用可能なメディア リソースの中から、必要なメディア リソース、たとえば、保留音サーバを選択します。 |
||
[パケットキャプチャモード(Packet Capture Mode)](Cisco IOS MGCP ゲートウェイのみ) |
このフィールドを設定するのは、Cisco IOS MGCP ゲートウェイに関する暗号化されたシグナリング情報のトラブルシューティングが必要な場合だけです。 パケット キャプチャリングを設定すると、コール処理中断の原因となります。 このフィールドの詳細については、『 Cisco Unified Communications Manager セキュリティ ガイド』を参照してください。 |
||
[パケットキャプチャ時間(Packet Capture Duration)](Cisco IOS MGCP ゲートウェイのみ) |
このフィールドを設定するのは、Cisco IOS MGCP ゲートウェイに関する暗号化されたシグナリング情報のトラブルシューティングが必要な場合だけです。 パケット キャプチャリングを設定すると、コール処理中断の原因となります。 このフィールドの詳細については、『 Cisco Unified Communications Manager セキュリティ ガイド』を参照してください。 |
||
[コーリングサーチスペース(Calling Search Space)] |
ドロップダウン リスト ボックスから、適切なコーリング サーチ スペースを選択します。 コーリング サーチ スペースは、収集された(発信)番号のルート指定方法を決定するために検索されるルート パーティションの集合から構成されます。 |
||
[AARコーリングサーチスペース(AAR Calling Search Space)] |
自動代替ルーティング(AAR)の実行時にデバイスが使用するコーリング サーチ スペースを選択します。 AAR コーリング サーチ スペースは、帯域幅不足によってコールがブロックされないように、収集された(発信)番号のルーティング方法を決定するために検索されるルート パーティションの集合を指定します。 |
||
[ロケーション(Location)] |
ロケーションは、コール アドミッション制御(CAC)を中央集中型コール処理システムに実装する際に使用します。 CAC では、ロケーション間のリンクを経由する際にオーディオ コールとビデオ コールで使用できる帯域幅を制限することにより、オーディオ品質とビデオのアベイラビリティを調整できます。 ロケーションは、このロケーションとの間のコールに使用可能な帯域幅の合計を指定します。 ドロップダウン リスト ボックスで、このデバイスに適切なロケーションを選択します。 ロケーションに [ハブなし(Hub_None)] を設定すると、そのロケーションの機能では、このデバイスが消費する帯域幅を把握しません。 [ファントム(Phantom)] というロケーション設定は、H.323 または SIP プロトコルを使用するクラスタ間トランク経由で CAC を正常に行うことができるロケーションを指定します。 新しいロケーションを設定するには、 メニュー オプションを使用します。ロケーションの詳細については、『 Cisco Unified Communications Manager アドミニストレーション ガイド』を参照してください。 クラスタ間トランク経由のロケーションベースの CAC の説明については、『 Cisco Unified Communications Manager システム ガイド』を参照してください。 |
||
[AARグループ(AAR Group)] |
このデバイスの自動代替ルーティング(AAR)グループを選択します。 AAR グループは、帯域幅不足のためにコールがブロックされないように、コールをルーティングするためのプレフィックス番号を提供します。 AAR グループ設定を [なし(None)] にすると、ブロックされたコールの再ルーティングは行われません。 |
||
[ネットワークロケール(Network Locale)] |
ドロップダウン リスト ボックスから、そのゲートウェイに関連したロケールを選択します。 そのネットワーク ロケールは、特定ロケーションのハードウェアをサポートする一連の詳細情報を識別します。 ネットワーク ロケールには、特定の地域でデバイスが使用するトーンおよび断続周期の定義が含まれています。
|
||
[信頼されたリレーポイントを使用(Use Trusted Relay Point)] |
ドロップダウン リスト ボックスで、 Cisco Unified Communications Manager が信頼されたリレーポイント(TRP)のデバイスをこのメディア エンドポイントで挿入するかどうかについて、有効化または無効化を指定します。 次のいずれかの値を選択します。
信頼されたリレー ポイント(TRP)デバイスには、Trusted Relay Point というラベルの付いた MTP またはトランスコーダ デバイスが指定されます。 エンドポイントに複数のリソース(たとえば、トランスコーダや RSVP エージェント)が必要な場合は、 Cisco Unified Communications Manager により、TRP は関連付けられたエンドポイント デバイスに最も近い位置に配置されます。 エンドポイントに TRP と MTP の両方が必要な場合、TRP は必須の MTP として使用されます。 コールの動作の詳細については、『 Cisco Unified Communications Manager システム ガイド』を参照してください。 TRP と RSVP エージェントの両方がエンドポイントに必要な場合、 Cisco Unified Communications Manager はまず、TRP としても使用可能な RSVP エージェントを検索します。 TRP とトランスコーダの両方がエンドポイントに必要な場合、 Cisco Unified Communications Manager はまず、TRP としても指定可能なトランスコーダを検索します。 ネットワーク バーチャライゼーションおよび信頼されたリレー ポイントの詳細については、『 Cisco Unified Communications Manager システム ガイド』を参照してください。 |
||
[発呼側名にUTF-8を転送(Transmit UTF-8 for Calling Party Name)] |
このデバイスは、デバイスに対するデバイス プールのユーザ ロケール設定を使用して、Unicode を送信するかどうか、および受信した Unicode 情報を変換するかどうかを決定します。 送信側デバイスでは、このチェックボックスをオンにすると、デバイスに対するデバイス プールのユーザ ロケール設定が着信側電話機のユーザ ロケールと一致する場合、デバイスは Unicode を送信します。 ユーザ ロケール設定が一致しない場合、デバイスは ASCII を送信します。 着信側デバイスは、そのデバイスの送信側デバイス プールのユーザ ロケール設定に基づいて、着信 Unicode 文字を変換します。 ユーザ ロケール設定が着信側電話機のユーザ ロケールに一致した場合、電話機には文字が表示されます。
|
||
[発呼側トランスフォーメーションCSS(Calling Party Transformation CSS)] |
(FXO ポートではなく)FXS ポートに対して表示されるこの設定を使用すると、デバイスの発呼側番号をローカライズすることができます。 選択する発呼側トランスフォーメーション CSS に、このデバイスに割り当てる発呼側トランスフォーメーション パターンが含まれていることを確認してください。
|
||
[デバイスプールの発呼側トランスフォーメーションCSSを使用(Use Device Pool Calling Party Transformation CSS)] |
デバイスに割り当てられているデバイス プールで設定された発呼側トランスフォーメーション CSS を使用するには、このチェックボックスをオンにします。 このチェックボックスをオフにした場合、デバイスでは、[ゲートウェイの設定(Gateway Configuration)] ウィンドウで設定した発呼側トランスフォーメーション CSS が使用されます。 この設定値は FXS ポートで表示され、FXO ポートでは表示されません。 |
||
[ホットラインデバイス(Hotline Device)] |
このデバイスをホットライン デバイスにするには、このチェックボックスをオンにします。 ホットライン デバイスは、他のホットライン デバイスにだけ接続できます。 この機能は、オフフックになると自動的に 1 つの電話番号をダイヤルするように電話機を設定する PLAR の拡張機能です。 ホットラインでは、PLAR を使用するデバイスに適用できる制限事項が追加されます。 ホットラインを実装するには、補足サービス ソフトキーのないソフトキー テンプレートを作成して、ホットライン デバイスに適用する必要もあります。 |
||
[MLPP情報(Multilevel Precedence and Preemption (MLPP) Information)] |
|||
[MLPPドメイン(MLPP Domain)] |
ドロップダウン リスト ボックスから、このデバイスに関連付けられた MLPP ドメインを選択します。 値を [<なし(None)>] のままにすると、このデバイスの MLPP ドメインは、このデバイスのデバイス プールに設定された値から継承されます。 デバイス プールに MLPP ドメインの設定がない場合、このデバイスの MLPP ドメインは、MLPP Domain Identifier エンタープライズ パラメータに設定された値から継承されます。 |
||
[MLPP通知(MLPP Indication)] |
この設定は、一部のデバイスでは使用できないことに注意してください。 使用可能な場合、この設定は、優先トーンを再生できるデバイスが MLPP 優先コールの発信時にその再生機能を使用するかどうかを指定します。 ドロップダウン リスト ボックスにある次のオプションの中から、デバイスに割り当てる設定を選択します。
|
||
[MLPPプリエンプション(MLPP Preemption)] |
この設定は、一部のデバイスでは使用できないことに注意してください。 使用可能な場合、この設定は、進行中のコールを優先できるデバイスが MLPP 優先コールの発信時にその優先機能を使用するかどうかを指定します。 ドロップダウン リスト ボックスにある次のオプションの中から、デバイスに割り当てる設定を選択します。
|
||
[ポート情報(Port Information)](POTS) |
|||
[ポートディレクション(Port Direction)] |
このポートをコールが通過する方向を選択します。 |
||
[プレフィックスDN(Prefix DN)](FXS ポート) |
このトランクが着信コールで受け取る数字に追加される、プレフィックス番号を入力します。 Cisco Unified Communications Manager は、[桁数(Num Digits)] の設定値に従って番号を切り捨てた後、プレフィックス番号を追加します。 国際的なエスケープ文字 + を入力することができます。 |
||
[桁数(Num Digits)](FXS ポート) |
収集する有意な数字の桁数(0 ~ 32)を入力します。 Cisco Unified Communications Manager は、有意な数字をコールされた番号の右側(最後の桁)からカウントします。 このフィールドは、着信コールの処理に使用されます。着信番号の最後の桁から数えた桁数を指定します。この桁数が、PRI スパンに着信するコールのルーティングに使用されます。 [プレフィックスDN(Prefix DN)] を参照してください。 |
||
[必要な桁数(Expected Digits)](FXS ポート) |
トランクの着信側で必要な桁数を入力します。 このフィールドはほとんど使用されないため、桁数が不明の場合は、デフォルト値 0 のままにしてください。 |
||
[不在ポート(Unattended Port)] |
このデバイス上の不在ポートを示すには、このチェックボックスをオンにします。 |
||
[位置情報の設定(Geo Location Configuration)] |
|||
[位置情報(Geo Location)] |
ドロップダウン リスト ボックスから、位置情報を選択します。 未指定の位置情報を選択できます。これは、このデバイスを位置情報に関連付けないことを示します。 メニュー オプションで設定された位置情報を選択することもできます。 |
||
[位置情報フィルタ(Geo Location Filter)] |
ドロップダウン リスト ボックスから、位置情報フィルタを選択します。 この値を [<なし(None)>] のままにすると、このデバイスには位置情報フィルタは適用されません。 [システム(System)][位置情報フィルタ(Geolocation Filter)] メニュー オプションで設定した位置情報フィルタを選択することもできます。
|
||
[プロダクト固有の設定(Product Specific Configuration)] |
|||
(ゲートウェイ メーカーによって指定される、モデル固有の設定フィールド) |
[プロダクト固有の設定(Product Specific Configuration)] の下にあるモデル固有のフィールドは、ゲートウェイ メーカーによって指定されます。 これらのフィールドは動的に設定されるため、予告なく変更される場合があります。 フィールドの説明とプロダクト固有の設定項目のヘルプを表示するには、[プロダクト固有の設定(Product Specific Configuration)] 見出しの右側にある情報アイコン [?] をクリックして、ポップアップ ダイアログ ボックスでヘルプを表示します。 詳細な情報が必要な場合は、設定するゲートウェイのマニュアルを参照するか、製造元に連絡してください。 |
次の表で、Cisco VG200 ゲートウェイ上の T1 CAS トランク用の値を追加または更新するためのフィールドについて、詳細に説明します。
一部のフィールドでは、 Cisco Unified Communications Manager の管理ページで設定された値が表示されます。
BAT ユーザ インターフェイスでは、アスタリスクが付いているフィールドには値を入力する必要があります。 アスタリスクのないフィールドでは、入力はオプションです。
フィールド |
説明 |
||
---|---|---|---|
[エンドポイント名(End-Point Name)] |
VG200 ゲートウェイの場合、ここは表示専用フィールドです。 Cisco Unified Communications Manager で生成された VG200 デジタル インターフェイスを一意に識別する文字列が表示されます。 次の例を参考にしてください。 S1/DS1-0@VG200-2 S1 はスロット 1 を表し、DS1-0 はデジタル インターフェイスを表し、@VG200-2 は VG200 テンプレート名を表します。 |
||
[説明(Description)] |
デバイスの目的を明確にした説明を入力します。 説明には、任意の言語で最大 50 文字を指定できますが、二重引用符(")、パーセント記号(%)、アンパサンド(&)、バックスラッシュ(\)、山カッコ(<>)は使用できません。 |
||
[デバイスプール(Device Pool)] |
ドロップダウン リスト ボックスから、適切なデバイス プールを選択します。 デバイス プールは、このデバイスのプロパティの集合(たとえば、Communications Manager グループ、日付/時刻グループ、地域、およびデバイスの自動登録用のコーリング サーチ スペース)を指定します。 |
||
[コールの分類(Call Classification)] |
このパラメータは、このゲートウェイを使用している着信コールがネットワーク上にない([オフネット(OffNet)])と見なされるか、ある([オンネット(OnNet)])と見なされるかを示します。 [コールの分類(Call Classification)] フィールドが [システムデフォルトの使用(Use System Default)] に設定されている場合、 Cisco Unified Communications Manager クラスタワイド サービス パラメータ Call Classification の設定値により、ゲートウェイが [オンネット(OnNet)] か、または [オフネット(OffNet)] かが決定します。 このフィールドは、コールが [オンネット(OnNet)] または [オフネット(OffNet)] の場合、それぞれの警告トーンを提供します。 |
||
[メディアリソースグループリスト(Media Resource Group List)] |
メディア リソース グループを優先順に並べたグループが表示されます。 アプリケーションは、メディア リソース リストで定義された優先順位に従って、使用可能なメディア リソースから、必要なメディア リソース、たとえば、保留音サーバを選択します。 |
||
[コーリングサーチスペース(Calling Search Space)] |
ドロップダウン リスト ボックスから、適切なコーリング サーチ スペースを選択します。 コーリング サーチ スペースは、収集された(発信)番号のルート指定方法を決定するために検索されるルート パーティションの集合を指定します。 Max List Box Items エンタープライズ パラメータを使用して、このドロップダウン リスト ボックスで表示するコーリング サーチ スペースの数を設定できます。 Max List Box Items エンタープライズ パラメータで指定するより多くのコーリング サーチ スペースが存在する場合は、ドロップダウン リスト ボックスの横に省略記号のボタン(...)が表示されます。 [...] ボタンをクリックすると、[コーリングサーチスペースの選択(Select Calling Search Space)] ウィンドウが表示されます。 [名前に次を含む項目を表示(List items where Name contains)] フィールドに、コーリング サーチ スペース名の一部を入力します。 [使用する項目を選択(Select item to use)] ボックスに表示されるコーリング サーチ スペースのリストで、目的のコーリング サーチ スペース名をクリックし、[OK] をクリックします。
|
||
[AARコーリングサーチスペース(AAR Calling Search Space)] |
自動代替ルーティング(AAR)の実行時にデバイスが使用するコーリング サーチ スペースを選択します。 AAR コーリング サーチ スペースは、帯域幅不足によってコールがブロックされないように、収集された(発信)番号のルーティング方法を決定するために検索されるルート パーティションの集合を指定します。 |
||
[ロケーション(Location)] |
このデバイスの適切なロケーションを選択します。 ロケーションは、このロケーションとの間のコールに使用可能な帯域幅の合計を指定します。 ロケーションを [なし(None)] に設定すると、ロケーション機能がこのデバイスの消費する帯域幅を管理しないことを示します。 |
||
[AARグループ(AAR Group)] |
このデバイスの自動代替ルーティング(AAR)グループを選択します。 AAR グループは、帯域幅不足のためにコールがブロックされないように、コールをルーティングするためのプレフィックス番号を提供します。 AAR グループ設定を [なし(None)] にすると、ブロックされたコールの再ルーティングは行われません。 |
||
[MLPPドメイン(MLPP Domain)] |
ドロップダウン リスト ボックスから、このデバイスに関連付ける MLPP ドメインを選択します。 この値を [<なし(None)>] のままにすると、このデバイスはデバイスのデバイス プールに設定された値から MLPP ドメインを継承します。 デバイス プールに MLPP ドメインの設定がない場合、このデバイスの MLPP ドメインは、MLPP Domain Identifier エンタープライズ パラメータに設定された値から継承されます。 |
||
[DTMF優先シグナルを処理(Handle DTMF Precedence Signals)] |
このゲートウェイが特殊な DTMF 信号を MLPP 優先レベルとして解釈できるようにするには、このチェックボックスをオンにします。 |
||
[ロード情報(Load Information)] |
ゲートウェイに適切なファームウェア ロード情報を入力します。 このフィールドに入力された値は、このゲートウェイのデフォルト値を上書きします。 |
||
[ポート選択順序(Port Selection Order)] |
チャネルまたはポートが発信コールに割り当てられる順序、つまり、最初のポート(最小番号のポート)から最後のポート(最大番号のポート)への順序か、最後のポートから最初のポートへの順序かを選択します。 有効な入力値には、[上から(TOP_DOWN)] または [下から(BOTTOM_UP)] があります。 どちらのポート順序を使用すべきかわからない場合は、[上から(TOP_DOWN)] を選択してください。 |
||
[送信番号(Digit Sending)] |
ダイヤルアウト方式に、次の数字送信タイプのいずれかを選択します。 |
||
[ネットワークロケール(Network Locale)] |
ドロップダウン リスト ボックスから、そのゲートウェイに関連したロケールを選択します。 そのネットワーク ロケールは、特定ロケーションのハードウェアをサポートする一連の詳細情報を識別します。 ネットワーク ロケールには、特定の地域でデバイスが使用するトーンおよび断続周期の定義が含まれています。
|
||
[SMDI基本ポート(SMDI Base Port)] |
T1 スパンの最初の SMDI ポート番号を入力します。 このパラメータをゼロ以外の値に設定した場合、このゲートウェイが不明なタイプのルート リストまたはルート グループに属しているときは、このスパンを越えるハントは続行されません。 |
||
[位置情報の設定(Geo Location Configuration)] |
|||
[位置情報(Geo Location)] |
ドロップダウン リスト ボックスから、位置情報を選択します。 未指定の位置情報を選択できます。これは、このデバイスを位置情報に関連付けないことを示します。 メニュー オプションで設定された位置情報を選択することもできます。 |
||
[位置情報フィルタ(Geo Location Filter)] |
ドロップダウン リスト ボックスから、位置情報フィルタを選択します。 この値を [<なし(None)>] のままにすると、このデバイスには位置情報フィルタは適用されません。 メニュー オプションで設定した位置情報フィルタを選択することもできます。 |
||
[プロダクト固有の設定(Product Specific Configuration)] |
|||
(ゲートウェイ メーカーによって指定される、モデル固有の設定フィールド) |
[プロダクト固有の設定(Product Specific Configuration)] の下にあるモデル固有のフィールドは、ゲートウェイ メーカーによって指定されます。 これらのフィールドは動的に設定されるため、予告なく変更される場合があります。 フィールドの説明とプロダクト固有の設定項目のヘルプを表示するには、[プロダクト固有の設定(Product Specific Configuration)] 見出しの右側にある情報アイコン [?] をクリックして、ポップアップ ダイアログ ボックスでヘルプを表示します。 詳細な情報が必要な場合は、設定するゲートウェイのマニュアルを参照するか、製造元に連絡してください。 |
次の表で、Cisco VG200 ゲートウェイ上の T1 PRI トランクまたは E1 PRI トランクの値を追加または更新するためのフィールドについて説明します。
一部のフィールドでは、 Cisco Unified Communications Manager の管理ページで設定された値が表示されます。
BAT ユーザ インターフェイスでは、アスタリスクが付いているフィールドには値を入力する必要があります。 アスタリスクのないフィールドでは、入力はオプションです。
フィールド |
説明 |
---|---|
[デバイス情報(Device Information)] |
|
[エンドポイント名(End-Point Name)] |
VG200 ゲートウェイの場合、ここは表示専用フィールドです。 Cisco Unified Communications Manager が生成する、VG200 エンドポイントを一意に識別する文字列が表示されます。 次の例を参考にしてください。 S1/DS1-0@VG200-2 S1 はスロット 1を表し、DS1-0 はデジタル インターフェイスを表し、@VG200-2 は VG200 ドメイン名を表します。 |
[説明(Description)] |
設定するエンドポイントの説明を入力します。 説明には、任意の言語で最大 50 文字を指定できますが、二重引用符(")、パーセント記号(%)、アンパサンド(&)、バックスラッシュ(\)、山カッコ(<>)は使用できません。 |
[デバイスプール(Device Pool)] |
このグループのゲートウェイまたはポート用のデバイス プールを選択します。 デバイス プールは、デバイスに共通した特性のセット(たとえば、地域、日付/時刻グループ、 Cisco Unified Communications Manager グループ、自動登録用のコーリング サーチ スペースなど)を定義します。 |
[コールの分類(Call Classification)] |
ドロップダウン リスト ボックスで、[オンネット(on net)]、[オフネット(off net)]、または [システムデフォルト(system default)] の中からデバイスの設定オプションを選択します。 デバイス レベルで [システムデフォルトの使用(Use System Default)] を選択した場合は、サービス パラメータの値を使用してデバイスが内部(オンネット)か外部(オフネット)かが決定されます。 |
[ネットワークロケール(Network Locale)] |
このゲートウェイに関連付けるネットワーク ロケールを選択します。 ネットワーク ロケールは、シスコのゲートウェイと電話機が、特定地域の PSTN およびその他のネットワークと通信するときに使用するトーンと断続周期を提供します。 |
[メディアリソースグループリスト(Media Resource Group List)] |
このグループのゲートウェイまたはポート用のメディア リソース グループ リスト(MRGL)を選択します。 MRGL は、優先順位が付けられたメディア リソース グループのリストを指定します。 アプリケーションは、MRGL で指定された優先順位に従って、使用可能なメディア リソースの中から、必要なメディア リソースを選択できます。 |
[ロケーション(Location)] |
このグループのゲートウェイまたはポート用のロケーションを選択します。 ロケーションは、帯域幅制限付き接続を使用してアクセスされるリモート ロケーションを指します。 |
[AARグループ(AAR Group)] |
このデバイスの自動代替ルーティング(AAR)グループを選択します。 AAR グループは、帯域幅不足のためにコールがブロックされないように、コールをルーティングするためのプレフィックス番号を提供します。 AAR グループ設定を [なし(None)] にすると、ブロックされたコールの再ルーティングは行われません。 |
[ロード情報(Load Information)] |
ゲートウェイ用のカスタム ソフトウェアに該当するロード情報を入力します。 このフィールドに入力された値は、このゲートウェイのデフォルト値を上書きします。 デフォルト ロードを使用する場合は、このフィールドをブランクのままにします。 |
[発呼側名にUTF-8を転送(Transmit UTF-8 for Calling Party Name)] |
このデバイスは、デバイスのデバイス プールのロケール設定を使用して、Unicode を送信するかどうか、および受信した Unicode 情報を変換するかどうかを決定します。 送信デバイスでは、このチェックボックスをオンにした場合に、デバイスのデバイス プールのユーザ ロケール設定が着信側電話機のユーザ ロケール設定に一致すると、デバイスは Unicode を送信します。 ユーザ ロケール設定が一致しない場合、デバイスは ASCII を送信します。 受信デバイスは、送信デバイスのデバイス プールのユーザ ロケール設定に基づいて、着信する Unicode 文字を変換します。 ユーザ ロケール設定が着信側電話機のユーザ ロケールに一致した場合、電話機には文字が表示されます。 トランクの両端で設定されたユーザ ロケールが同じ言語グループに属していない場合、電話機には不適切な文字が表示されることがあります。 |
[MLPP情報(Multilevel Precedence and Preemption (MLPP) Information)] |
|
[MLPPドメイン(MLPP Domain)]("0000FF" など) |
このデバイスに関連付けられている MLPP ドメインの 16 進数値を入力します。 ブランクまたは 0 ~ FFFFFF の値である必要があります。 |
[インターフェイス情報(Interface Information)] |
|
[PRI プロトコルタイプ(PRI Protocol Type)] |
スパンの通信プロトコルを選択します。 E1 PRI スパンには、次のオプションがあります。 T1 PRI スパンには、通信事業者または交換機に応じて、複数のオプションがあります。
|
[プロトコル側(Protocol Side)] |
適切なプロトコル側を選択します。 この設定値は、ゲートウェイが Central Office/Network デバイスに接続されるか、User デバイスに接続されるかを指定します。 PRI 接続の両側で、反対の設定値を使用していることを確認してください。 たとえば、PBX に接続されているときに、その PBX が [プロトコル側(Protocol Side)] として [ユーザ(User)] を使用する場合は、このデバイスには [ネットワーク(Network)] を選択してください。 一般に、Central Office(CO)接続には User を使用します。 |
[チャネル選択順序(Channel Selection Order)] |
チャネルまたはポートが使用可能になる順序、つまり、最初のポート(最小番号のポート)から最後のポート(最大番号のポート)への順序か、最後のポートから最初のポートへの順序かを選択します。 有効な入力値は、[上から(TOP_DOWN)] または [下から(BOTTOM_UP)] です。 どちらのポート順序を使用すべきかわからない場合は、[上から(TOP_DOWN)] を選択してください。 デフォルトは [下から(BOTTOM_UP)] です。 |
[チャネルIE タイプ(Channel IE Type)] |
次の値のいずれかを選択して、チャネル選択がチャネル マップとして提示されるか、スロット マップとして提示されるかを指定します。 |
[PCMタイプ(PCM Type)] |
デジタル エンコーディング形式を指定します。 次のいずれかの形式を選択します。 |
[最初のリスタートの遅延(Delay for first restart)] |
(オプション)スパンが開始するレートを、1/8 秒単位で入力します。 システム上で複数の PRI スパンが使用可能であるときに、[PRI初期化でリスタートを制限(Inhibit restarts at PRI initialization)] チェックボックスがオンになっていない場合、この遅延が発生します (デフォルト値は 32)。 たとえば、最初の 5 個のカードを 0 に設定し、次の 5 個のカードを 16 に設定します (カードをイン サービスにするには、2 秒待ってください)。 |
[リスタート間遅延(Delay between restarts)] |
再起動間の間隔を、1/8 秒単位で入力します。 遅延が起きるのは、[PRI初期化でリスタートを制限(Inhibit restarts at PRI initialization)] チェックボックスがオフになっている場合に、PRI RESTART が送信されるときです (デフォルト値は 4)。 |
[PRI初期化でリスタートを制限(Inhibit restarts at PRI initialization)] |
再起動メッセージによって、PRI スパン上のポートの状況を確認します。 RESTART が送信されない場合、 Cisco Unified Communications Manager は、ポートが使用中であると想定します。 デフォルトでは、このチェックボックスはオンになっています。 D チャネルは、別の PRI トランクの D チャネルと正常に接続されると、このチェックボックスがオフの場合は、Restart を送信します。 |
[ステータスポーリングを有効化(Enable status poll)] |
このチェックボックスをオンにすると、 Cisco Unified Communications Manager の拡張サービス パラメータ(Change B-Channel Maintenance Status)を使用可能にできます。 このサービス パラメータによって B チャネルがアクティブのときに個別の B チャネルをサービスから除外できます。 Change B-Channel Maintenance Status サービス パラメータを無効にするには、このチェックボックスをオフにします。 デフォルトでは、このフィールドはオフです。 |
[不在ポート(Unattended Port)] |
このデバイス上の不在ポートを示すには、このチェックボックスをオンにします。 |
[コールルーティング情報 - インバウンドコール(Call Routing Information - Inbound Calls)] |
|
[有意な数字(Significant Digits)] |
このフィールドは、PRI スパンが着信コールで保持しなければならない末尾の桁数を表します。 有意な数字が有効になっているトランクは、着信コールで提供されるアドレスの最後の数桁以外をすべて切り捨てます。 有意な数字を収集するかどうかに応じて、このチェックボックスをオンまたはオフにします。 |
[コーリングサーチスペース(Calling Search Space)] |
このグループの電話機またはポートのコーリング サーチ スペースを選択します。 コーリング サーチ スペースは、ルート パーティションの集合を指定するものです。ルート パーティションの集合は、ダイヤルされた番号のルーティング方法を決定するために検索されます。 |
[AARコーリングサーチスペース(AAR Calling Search Space)] |
自動代替ルーティング(AAR)の実行時にデバイスが使用するコーリング サーチ スペースを選択します。 AAR コーリング サーチ スペースは、帯域幅不足によってコールがブロックされないように、収集された(発信)番号のルーティング方法を決定するために検索されるルート パーティションの集合を指定します。 |
[プレフィックスDN(Prefix DN)] |
(オプション)着信コールでこのトランクが受信する数字に付加されるプレフィックス番号を入力します。 Cisco Unified Communications Manager は、[桁数(Num Digits)] の設定値に従って番号を切り捨てた後、プレフィックス番号を追加します。 |
[コールルーティング情報 - アウトバウンドコール(Call Routing Information - Outbound Calls)] |
|
[発呼者回線IDの表示(Calling Line ID Presentation)] |
Cisco Unified Communications Manager が発信者電話番号を送信するか、ブロックするかを選択します。 発呼者回線 ID の表示を変更しない場合は、[デフォルト(Default)] を選択します。 Cisco Unified Communications Manager が「許可された発呼者回線 ID」を送信するようにする場合は、[許可(Allowed)] を選択します。 Cisco Unified Communications Manager が「非許可の発呼者回線 ID」を送信するようにする場合は、[非許可(Restricted)] を選択します。 |
[発呼者の選択(Calling Party Selection)] |
ゲートウェイ上のすべての発信コールは、電話番号情報を送信できます。 送信される電話番号を選択します。 |
[発呼側IE番号タイプが不明(Calling Party IE Number Type Unknown)] |
発呼側電話番号の番号タイプの形式を選択します。 Cisco Unified Communications Manager は、発呼側電話番号(DN)のタイプを設定します。 NANP やヨーロッパ ダイヤル計画などのダイヤル計画に十分な経験がある場合を除いて、デフォルト値を変更しないようにお勧めします。 Cisco Unified Communications Manager はヨーロッパ国別のダイヤル パターンを認識しないため、ヨーロッパ圏ではデフォルトの変更が必要になる場合があります。 また、非国別タイプ番号としてルーティングを実行する PBX に接続する場合も、この設定値を変更できます。 次のいずれかのオプションを選択します。 |
[着信側IE番号タイプが不明(Called Party IE Number Type Unknown)] |
着信側電話番号の番号タイプの形式を選択します。 Cisco Unified Communications Manager は、着信側電話番号(DN)のタイプを設定します。 NANP やヨーロッパ ダイヤル計画などのダイヤル計画に十分な経験がある場合を除いて、デフォルト値を変更しないようにお勧めします。 Cisco Unified Communications Manager はヨーロッパ国別のダイヤル パターンを認識しないため、ヨーロッパ圏ではデフォルトの変更が必要になる場合があります。 また、非国別タイプ番号としてルーティングを実行する PBX に接続する場合も、この設定値を変更できます。 次のいずれかのオプションを選択します。 |
[着信番号計画(Called Numbering Plan)] |
着信側電話番号の番号計画の形式を選択します。 Cisco Unified Communications Manager は、着信側 DN の番号計画を設定します。 NANP やヨーロッパ ダイヤル計画などのダイヤル計画に十分な経験がある場合を除いて、デフォルト値を変更しないようにお勧めします。 Cisco Unified Communications Manager はヨーロッパ国別のダイヤル パターンを認識しないため、ヨーロッパ圏ではデフォルトの変更が必要になる場合があります。 また、非国別タイプ番号としてルーティングを実行する PBX に接続する場合も、この設定値を変更できます。 次のいずれかのオプションを選択します。 |
[発呼番号計画(Calling Numbering Plan)] |
発呼側電話番号の番号計画の形式を選択します。 Cisco Unified Communications Manager は、発呼側 DN の番号計画を設定します。 NANP やヨーロッパ ダイヤル計画などのダイヤル計画に十分な経験がある場合を除いて、デフォルト値を変更しないようにお勧めします。 Cisco Unified Communications Manager はヨーロッパ国別のダイヤル パターンを認識しないため、ヨーロッパ圏ではデフォルトの変更が必要になる場合があります。 また、非国別タイプ番号としてルーティングを実行する PBX に接続する場合も、この設定値を変更できます。 次のいずれかのオプションを選択します。 |
[削除桁数(Number of digits to strip)] |
発信コールに関して除去する桁数を、0 ~ 32 で選択します (デフォルト値は 0)。 たとえば、8889725551234 にダイヤルし、除去する桁数が 3 であるとします。 この例では Cisco Unified Communications Manager は発信番号から 888 を除去します。 |
[発信者ID DN(Caller ID DN)] |
発信者 ID に使用するパターンを 0 ~ 24 桁で入力します。 たとえば、北米では次のとおりです。 |
[PRI プロトコルタイプ固有情報(PRI Protocol Type Specific Information)] |
|
[IE配信を表示(Display IE Delivery)] |
(オプション)発呼側と着信側の名前通知サービスに対して、SETUP メッセージおよび CONNECT メッセージ内の表示情報要素(IE)の通知を可能にするには、このチェックボックスをオンにします。 デフォルトでは、このチェックボックスはオフになっています。 |
[番号IE配信のリダイレクト - アウトバウンド(Redirecting Number IE Delivery - Outbound)] |
(オプション)コールの自動転送時に最初にリダイレクトした端末番号とコールのリダイレクトの理由を知らせるために、SETUP メッセージに番号 IE のリダイレクトを含めるには、このチェックボックスをオンにします。 デフォルトでは、このチェックボックスはオフになっています。 この設定値は、Digital Access ゲートウェイ用のすべてのプロトコル上で、SETUP メッセージだけに適用されます。 |
[番号IE配信のリダイレクト - インバウンド(Redirecting Number IE Delivery - Inbound)] |
(オプション)コールの自動転送時に最初にリダイレクトした端末番号とコールのリダイレクトの理由を知らせるために、SETUP メッセージに番号 IE のリダイレクトを含めるには、このチェックボックスをオンにします。 デフォルトでは、このチェックボックスはオフになっています。 この設定値は、Digital Access ゲートウェイ用のすべてのプロトコル上で、SETUP メッセージだけに適用されます。 |
[IE 表示での付加先行文字を送る(Send Extra Leading Character in Display IE)] |
Display IE フィールドに特殊先行文字バイト(ASCII 以外の表示不能なバイト)を含める場合は、このチェックボックスをオンにします。 DisplayIE フィールドからこの文字バイトを除外するには、このチェックボックスをオフにします。 このチェックボックスが適用されるのは、DMS-100 プロトコルと DMS-250 プロトコルに限られます。 デフォルトでは、この設定値は使用不可(チェックボックスはオフ)になっています。 |
[非ISDNプログレスインジケータIEを有効に設定(Setup non-ISDN Progress Indicator IE Enable)] |
(オプション)一部の PBX 上でリングバックを強制するには、このフィールドに値を指定する必要があります。 デフォルトでは、このチェックボックスはオフになっています。 ユーザが発信コールでリングバック音を受信しない場合だけ、このチェックボックスをオンにしてください。 この設定値が使用可能である場合、 Cisco Unified Communications Manager は、Q.931 セットアップ メッセージを、プログレス インジケータ フィールドが non-ISDN に設定されているデジタル(つまり、非 H.323)ゲートウェイに送信します。 このメッセージは、 Cisco Unified Communications Manager ゲートウェイが non-ISDN であること、および宛先デバイスが帯域内呼び出し音を再生しなければならないことを、宛先デバイスに知らせます。 この問題は、通常、デジタル ゲートウェイを使用して PBX に接続される Cisco Unified Communications Manager に関連しています。 |
[MCDN チャネル番号拡張ビットを0に設定(MCDN Channel Number Extension Bit Set to Zero)] |
このフィールドは、DMS-100 プロトコルだけに適用されます。 インターフェイス識別子が存在することを指定するには、このチェックボックスをオンにします。 デフォルトでは、このチェックボックスはオフになっています。 |
[ファシリティIEでのコール名を送る(Send Calling Name In Facility IE)] |
このフィールドは、DMS-100 プロトコルだけに適用されます。 PBX プロバイダーから得られる値を入力します。 有効な値は 0~ 255 です。 |
[インターフェイス識別子あり(Interface Identifier Present)] |
このフィールドは、DMS-100 プロトコルだけに適用されます。 インターフェイス識別子が存在することを指定するには、このチェックボックスをオンにします。 デフォルトでは、このチェックボックスはオフになっています。 |
[インターフェイス識別子の値(Interface Identifier Value)] |
このフィールドは、DMS-100 プロトコルだけに適用されます。 PBX プロバイダーから得られる値を入力します。 有効な値は 0~ 255 です。 |
[接続側回線IDの表示(Connected Line ID Presentation)] |
Cisco Unified Communications Manager が着信側電話番号の表示を許可するか、ブロックするかを選択します。 接続側回線 ID の表示を変更しない場合は、[デフォルト(Default)] を選択します。 Cisco Unified Communications Manager が「許可された接続側回線 ID」を送信するようにする場合は、[許可(Allowed)] を選択します。 Cisco Unified Communications Manager が「非許可の接続側回線 ID」を送信するようにする場合は、[非許可(Restricted)] を選択します。 |
[UUIE の設定(UUIE Configuration)] |
|
[UUIE を介した優先レベルの通知(Passing Precedence Level Through UUIE)] |
MLPP 情報が PRI 4ESS UUIE フィールドを通過できるようにするには、このチェックボックスをオンにします。 このボックスは、DRSN スイッチの操作に使用されます。 このチェックボックスは、このゲートウェイで PRI プロトコルタイプの値に PRI 4ESS が指定されている場合にだけ使用可能になります。 デフォルト値は、オフです。 |
[セキュリティアクセスレベル(Security Access Level)] |
セキュリティ アクセス レベルの値を入力します。 有効値は 00 ~ 99 です。 [UUIE を介した優先レベルの通知(Passing Precedence Level Through UUIE)] チェックボックスがオンの場合に限り、このフィールドを使用できます。 デフォルト値は 2 です。 |
[位置情報の設定(Geo Location Configuration)] |
|
[位置情報(Geo Location)] |
ドロップダウン リスト ボックスから、位置情報を選択します。 未指定の位置情報を選択できます。これは、このデバイスを位置情報に関連付けないことを示します。 メニュー オプションで設定された位置情報を選択することもできます。 |
[位置情報フィルタ(Geo Location Filter)] |
ドロップダウン リスト ボックスから、位置情報フィルタを選択します。 この値を [<なし(None)>] のままにすると、このデバイスには位置情報フィルタは適用されません。 メニュー オプションで設定した位置情報フィルタを選択することもできます。 |
[プロダクト固有の設定(Product Specific Configuration)] [プロダクト固有の設定(Product Specific Configuration)] の下にあるモデル固有のフィールドは、ゲートウェイ メーカーによって指定されます。 フィールドの説明とプロダクト固有の設定項目のヘルプを表示するには、[プロダクト固有の設定(Product Specific Configuration)] 見出しの右側にある情報アイコン [?] をクリックして、ポップアップ ウィンドウでヘルプを表示します。 詳細な情報が必要な場合は、設定するゲートウェイの資料を参照してください。 |
フィールド |
説明 |
||
---|---|---|---|
[ポートタイプ(Port Type)] |
[ポートタイプ(Port Type)] ドロップダウン リスト ボックスで、[POTS] を選択します。 |
||
[開始ポート番号(Beginning Port Number)] [終了ポート番号(Ending Port Number)] |
[開始ポート番号(Beginning Port Number)] フィールドと [終了ポート番号(Ending Port Number)] フィールドに値を設定して、追加および設定するポートが、使用可能なすべてのポートであるか、1 つのポートであるか、ある範囲のポートであるかを選択します。
|
||
[ポートディレクション(Port Direction)] |
このポートをコールが通過する方向を選択します。 |
||
[IPネットワークへのオーディオ信号調整(Audio Signal Adjustment into IP Network)] |
ポート アプリケーション タイプに関連した受信オーディオ信号に適用されるゲインまたはロスを指定します。
|
||
[IPネットワークからのオーディオ信号調整(Audio Signal Adjustment from IP Network)] |
ポート アプリケーション タイプに関連した送信オーディオ信号に適用されるゲインまたはロスを指定します。
|
||
[プレフィックスDN(Prefix DN)] |
このトランクが着信コールで受け取る数字に追加される、プレフィックス番号を入力します。 Cisco Unified Communications Manager は、[桁数(Num Digits)] の設定値に従って番号を切り捨てた後、プレフィックス番号を追加します。 |
||
[桁数(Num Digits)] |
収集する有意な数字の桁数(0 ~ 32)を入力します。 Cisco Unified Communications Manager は、有意な数字をコールされた番号の右側(最後の桁)からカウントします。 このフィールドは、着信コールの処理に使用されます。着信番号の最後の桁から数えた桁数を指定します。この桁数が、PRI スパンに着信するコールのルーティングに使用されます。 [プレフィックスDN(Prefix DN)] を参照してください。 |
||
[必要な桁数(Expected Digits)] |
トランクの着信側で必要な桁数を入力します。 このフィールドはほとんど使用されないため、桁数が不明の場合は、デフォルト値 0 のままにしてください。 |
||
[コール再開タイマー(1000~5000 ms)(Call Restart Timer (1000-5000 ms))] |
コール再開タイマー(1000~5000 ms)。ms は、ミリ秒単位の時間を示します。 |
||
[オフフック確認タイマー(100~1000 ms)(Offhook Validation Timer (100-1000 ms))] |
オフフック確認タイマー(100~1000 ms)。ms は、ミリ秒単位の時間を示します。 |
||
[オンフック確認タイマー(100~1000 ms)(Onhook Validation Timer (100-1000ms))] |
オンフック確認タイマー(100~1000 ms)。ms は、ミリ秒単位の時間を示します。 |
||
[フックフラッシュタイマー(100~1500 ms)(Hookflash Timer (100 - 1500 ms))] |
フックフラッシュタイマー(100~1500 ms)。ms は、ミリ秒単位の時間を示します。 |
||
[プロダクト固有の設定(Product Specific Configuration)] |
|||
(ゲートウェイ メーカーによって指定される、モデル固有の設定フィールド) |
[プロダクト固有の設定(Product Specific Configuration)] の下にあるモデル固有のフィールドは、ゲートウェイ メーカーによって指定されます。 これらのフィールドは動的に設定されるため、予告なく変更される場合があります。 フィールドの説明とプロダクト固有の設定項目のヘルプを表示するには、[プロダクト固有の設定(Product Specific Configuration)] 見出しの右側にある情報アイコン [?] をクリックして、ポップアップ ダイアログ ボックスでヘルプを表示します。 詳細な情報が必要な場合は、設定するゲートウェイのマニュアルを参照するか、製造元に連絡してください。 |
Cisco VG200 ゲートウェイ上の T1 CAS トランク用 E&M ポートの値を追加または更新する際には、次のフィールドの説明を参照してください。
一部のフィールドでは、 Cisco Unified Communications Manager の管理ページで設定された値が表示されます。
BAT ユーザ インターフェイスでは、アスタリスクが付いているフィールドには値を入力する必要があります。 アスタリスクのないフィールドでは、入力はオプションです。
フィールド |
説明 |
---|---|
[ポートタイプ(Port Type)] |
[ポートタイプ(Port Type)] ドロップダウン リスト ボックスから、[EANDM] を選択します。 |
[開始ポート番号(Beginning Port Number)] [終了ポート番号(Ending Port Number)] |
[開始ポート番号(Beginning Port Number)] フィールドと [終了ポート番号(Ending Port Number)] フィールドに値を設定して、追加および設定するポートが、使用可能なすべてのポートであるか、1 つのポートであるか、ある範囲のポートであるかを選択します。
|
[ポートの詳細(Port Details)] |
|
[ポートディレクション(Port Direction)] |
このポートをコールが通過する方向を選択します。 |
[発呼者の選択(Calling Party Selection)] |
ゲートウェイ上のすべての発信コールは、電話番号情報を送信できます。 送信される電話番号を選択します。
|
[発信者IDタイプ(Caller ID Type)] |
発信者 ID のタイプとして次のどちらかを選択します。 |
[発信者ID DN(Caller ID DN)] |
発呼者回線 ID に使用するパターン(0 ~ 24 桁)を入力します。 たとえば、北米では次のとおりです。 |
[プレフィックスDN(Prefix DN)] |
着信コールの着信側番号に追加されるプレフィックス番号を入力します。 Cisco Unified Communications Manager は、[桁数(Num Digits)] の設定値に従って番号を切り捨てた後、プレフィックス番号を追加します。 |
[桁数(Num Digits)] |
収集する有意な数字の桁数(0 ~ 32)を選択します。 Cisco Unified Communications Manager は、有意な数字をコールされた番号の右側(最後の桁)からカウントします。 このフィールドは、[有意な数字(Significant Digits)] チェックボックスがオンである場合に使用します。 このフィールドは、着信コールの処理に使用されます。着信番号の最後の桁から数えた桁数を指定します。この桁数が、PRI スパンに着信するコールのルーティングに使用されます。 [プレフィックスDN(Prefix DN)] および [有意な数字(Significant Digits)] を参照してください。 |
[必要な桁数(Expected Digits)] |
トランクの着信側で必要な桁数を入力します。 このフィールドはほとんど使用されないため、桁数が不明の場合は、デフォルト値 0 のままにしてください。 |
[不在ポート(Unattended Port)] |
このデバイス上の不在ポートを示すには、このチェックボックスをオンにします。 |
[プロダクト固有の設定(Product Specific Configuration)] |
|
(ゲートウェイ メーカーによって指定される、モデル固有の設定フィールド) |
[プロダクト固有の設定(Product Specific Configuration)] の下にあるモデル固有のフィールドは、ゲートウェイ メーカーによって指定されます。 これらのフィールドは動的に設定されるため、予告なく変更される場合があります。 フィールドの説明とプロダクト固有の設定項目のヘルプを表示するには、[プロダクト固有の設定(Product Specific Configuration)] 見出しの右側にある情報アイコン [?] をクリックして、ポップアップ ダイアログ ボックスでヘルプを表示します。 詳細な情報が必要な場合は、設定するゲートウェイのマニュアルを参照するか、製造元に連絡してください。 |
目次
- ゲートウェイ テンプレート
- シスコのゲートウェイの追加
- BAT を使用した Cisco VG200 ゲートウェイの追加
- BAT を使用した Cisco Catalyst 6000(FXS)ゲートウェイとポートの追加
- BAT を使用した Cisco VG224 ゲートウェイの追加
- BAT を使用した Cisco VG202 および Cisco VG204 ゲートウェイの追加
- ゲートウェイ テンプレートの検索
- ゲートウェイ テンプレートの追加または編集
- Cisco VG200 ゲートウェイ テンプレートの作成
- Cisco VG200 ゲートウェイ テンプレートへのポートの追加
- VG200 ゲートウェイ テンプレートへの FXS ポートの追加
- VG200 ゲートウェイ テンプレートへの FXO ポートの追加
- VG200 ゲートウェイ テンプレートへの Digital Access T1(T1-CAS)ポートの追加
- VG200 ゲートウェイ テンプレートへの T1 PRI または E1 PRI デバイスの追加
- Cisco Catalyst 6000(FXS)ゲートウェイ テンプレートの作成
- Cisco VG224 ゲートウェイ テンプレートの作成
- VG224 ゲートウェイ テンプレートへの FXS ポートの追加
- Cisco VG202 または VG204 ゲートウェイ テンプレートの作成
- VG202 または VG204 ゲートウェイ テンプレートへの FXS ポートの追加
- ゲートウェイの設定
- VG200 ゲートウェイ テンプレートのフィールドの説明
- VG224 ゲートウェイ テンプレートのフィールドの説明
- VG202 および VG204 ゲートウェイ テンプレートのフィールドの説明
- Cisco Catalyst 6000 24 ポート FXS ゲートウェイ テンプレートのフィールドの説明
- FXS/FXO ポート設定のフィールドの説明
- Cisco VG200 ゲートウェイ テンプレート上の Digital Access T1 トランクのフィールドの説明
- Cisco VG200 ゲートウェイ テンプレート上の T1 PRI または E1 PRI トランクのフィールドの説明
- ポートの設定
- POTS ポートの設定
- Digital Access T1 用の E & M ポートのフィールドの説明
- ゲートウェイの設定に関連する項目
シスコのゲートウェイの追加
- BAT を使用した Cisco VG200 ゲートウェイの追加
- BAT を使用した Cisco Catalyst 6000(FXS)ゲートウェイとポートの追加
- BAT を使用した Cisco VG224 ゲートウェイの追加
- BAT を使用した Cisco VG202 および Cisco VG204 ゲートウェイの追加
関連タスク
関連情報
BAT を使用した Cisco VG200 ゲートウェイの追加
はじめる前に手順VG200 ゲートウェイを Cisco Unified Communications Manager データベースに追加する前に、まず Cisco IOS ソフトウェア コマンドライン インターフェイス(CLI)を使用してゲートウェイを設定する必要があります。 ゲートウェイの設定手順とコマンドについては、ゲートウェイに付属している設定マニュアルを参照してください。
ステップ 1 Cisco VG200 ゲートウェイ テンプレートを作成して、ゲートウェイとポートのセットに共通の値を定義します。 Cisco VG200 ゲートウェイ テンプレートの作成を参照してください。 ステップ 2 CSV データ ファイルを作成して、追加するゲートウェイとポートごとに個々の値を定義します。 Cisco VG200 ゲートウェイ用 CSV データ ファイルの作成を参照してください。 ステップ 3 ゲートウェイとポートを Cisco Unified Communications Manager データベースに挿入します。 Cisco Unified Communications Manager へのゲートウェイとポートの挿入を参照してください。
関連情報
BAT を使用した Cisco Catalyst 6000(FXS)ゲートウェイとポートの追加
BAT を使用して、Cisco Catalyst 6000 (FXS) ゲートウェイを Cisco Unified Communications Manager データベースに追加することができます。 また、アナログ デバイス用に、FXS ポートを Cisco Catalyst 6000 (FXS) アナログ インターフェイス モジュールに追加できます。 Gateway Directory Number テンプレートを設定して、これらの FXS ポートおよび Catalyst 6000 (FXS) ポート テンプレートに関連付けしてから、これらのポートを Cisco Unified Communications Manager データベースに追加する必要があります。
はじめる前に手順BAT を使用してアナログ インターフェイス モジュール用に FXS ポートを追加する前に、次のタスクを実行して Cisco Catalyst 6000 ゲートウェイをインストールする必要があります。
Cisco IOS ソフトウェアのコマンドライン インターフェイスを使用して、ゲートウェイを設定します。 設定方法については、ゲートウェイに付属しているマニュアルを参照してください。
Cisco Unified Communications Manager の管理ページを使用して、Cisco Catalyst 6000 ゲートウェイを Cisco Unified Communications Manager データベースに追加します。 Cisco Unified Communications Manager の管理ページで、 の順に選択し、[新規追加(Add New)] をクリックします。 Cisco Catalyst 6000 24 ポート FXS ゲートウェイとデバイス プロトコルを選択して、[次へ(Next)] をクリックします。 詳細については、『Cisco Unified Communications Manager アドミニストレーション ガイド』を参照してください。
ステップ 1 Cisco Catalyst 6000 (FXS) ゲートウェイ テンプレートを作成します。 Cisco Catalyst 6000(FXS)ゲートウェイ テンプレートの作成を参照してください。 ステップ 2 FXS ポートのセットに共通の値を定義するために、Cisco Catalyst 6000 (FXS) ポート テンプレートを作成します。 FXS/FXO ポート設定のフィールドの説明を参照してください。 ステップ 3 追加する FXS ポート用に個々の値を定義するために、CSV データ ファイルを作成します。 Cisco Catalyst 6000(FXS)ポート用 CSV データ ファイルの作成を参照してください。 ステップ 4 ゲートウェイとポートを Cisco Unified Communications Manager データベースに挿入します。 Cisco Unified Communications Manager へのゲートウェイとポートの挿入を参照してください。
関連情報
BAT を使用した Cisco VG224 ゲートウェイの追加
はじめる前に手順VG224 ゲートウェイを Cisco Unified Communications Manager データベースに追加する前に、まず Cisco IOS ソフトウェア コマンドライン インターフェイス(CLI)を使用してゲートウェイを設定する必要があります。 ゲートウェイの設定手順とコマンドについては、ゲートウェイに付属している設定マニュアルを参照してください。
ステップ 1 Cisco VG224 ゲートウェイ テンプレートを作成して、ゲートウェイとポートのセットに共通の値を定義します。 Cisco VG224 ゲートウェイ テンプレートの作成を参照してください。 ステップ 2 CSV データ ファイルを作成して、追加するゲートウェイとポートごとに個々の値を定義します。 Cisco VG224 ゲートウェイとポートの CSV データ ファイルの作成を参照してください。 ステップ 3 ゲートウェイとポートを Cisco Unified Communications Manager データベースに挿入します。 Cisco Unified Communications Manager へのゲートウェイとポートの挿入を参照してください。
関連情報
BAT を使用した Cisco VG202 および Cisco VG204 ゲートウェイの追加
はじめる前に手順VG202 または VG204 ゲートウェイを Cisco Unified Communications Manager データベースに追加する前に、まず Cisco IOS ソフトウェア コマンドライン インターフェイス(CLI)を使用してゲートウェイを設定する必要があります。 ゲートウェイの設定手順とコマンドについては、ゲートウェイに付属している設定マニュアルを参照してください。
ステップ 1 シスコのゲートウェイのテンプレートを作成して、ゲートウェイとポートのセットに共通の値を定義します。 Cisco VG202 または VG204 ゲートウェイ テンプレートの作成を参照してください。 ステップ 2 CSV データ ファイルを作成して、追加するゲートウェイとポートごとに個々の値を定義します。 Cisco VG202 および VG204 ゲートウェイ用 CSV データ ファイルの作成を参照してください。 ステップ 3 ゲートウェイとポートを Cisco Unified Communications Manager データベースに挿入します。 Cisco Unified Communications Manager へのゲートウェイとポートの挿入を参照してください。
関連情報
ゲートウェイ テンプレートの検索
手順複数のゲートウェイ テンプレートに対応できるように、 Cisco Unified Communications Manager では、一定の検索条件に基づいて特定のテンプレートを探し出すことができます。 テンプレートを見つける手順は、次のとおりです。
(注)
ブラウザ セッションの作業中、検索/一覧表示の検索プリファレンスはクライアント マシンのクッキーに格納されます。 別のメニュー項目に移動してからこのメニュー項目に戻った場合、またはブラウザを閉じてから新しいブラウザ ウィンドウを再度開いた場合、検索を変更するまで Cisco Unified Communications Manager 検索プリファレンスが維持されます。
ステップ 1 [ゲートウェイの検索/一覧表示(Find and List Gateway)] の順に選択します。 ウィンドウが表示されます。 ステップ 2 最初の [検索対象:ゲートウェイ、検索条件:(Find Gateways where)] ドロップダウン リスト ボックスで、次のいずれかの検索条件を選択します。 ステップ 3 2 番目の [検索対象:ゲートウェイ、検索条件:(Find Gateways where)] ドロップダウン リスト ボックスで、次のいずれかの検索条件を選択します。 ステップ 4 必要に応じて、適切な検索テキストを指定します。
ヒント データベースに登録されたすべてのゲートウェイを検索するには、検索テキストを入力せずに [検索(Find)] をクリックします。
ステップ 5 3 番目のドロップダウン リスト ボックスから、[表示(Show)] を選択してゲートウェイに関連付けられたエンド ポイントを表示し、[検索(Find)] をクリックします。 検索されたテンプレートのリストが、次の項目別に表示されます。
ステップ 6 レコードのリストから、検索条件に一致するデバイス名をクリックします。 [ゲートウェイの設定(Gateway Configuration)] ウィンドウが表示されます。
関連情報
ゲートウェイ テンプレートの追加または編集
手順
ステップ 1 [一括管理(Bulk Administration)][ゲートウェイ(Gateways)][ゲートウェイテンプレート(Gateway Template)] の順に選択します。 [ゲートウェイテンプレートの検索/一覧表示(Find and List Gateway Template)] ウィンドウが表示されます。
ステップ 2 次のいずれかの手順を完了します。
- VG200 テンプレートを作成する場合は、Cisco VG200 ゲートウェイ テンプレートの作成を参照してください。
- Cisco Catalyst 6000 (FXS) ポート テンプレートを作成する場合は、Cisco Catalyst 6000(FXS)ゲートウェイ テンプレートの作成を参照してください。
- VG224 テンプレートを作成する場合は、Cisco VG224 ゲートウェイ テンプレートの作成を参照してください。
- VG202 または VG204 テンプレートを作成する場合は、Cisco VG202 または VG204 ゲートウェイ テンプレートの作成を参照してください。
Cisco VG200 ゲートウェイ テンプレートの作成
手順
ステップ 1 [ゲートウェイの検索/一覧表示(Find and List Gateway)] の順に選択します。 ウィンドウが表示されます。 ステップ 2 [新規追加(Add New)] をクリックします。 [新規ゲートウェイを追加(Add a New Gateway)] ウィンドウが表示されます。 ステップ 3 [ゲートウェイタイプ(Gateway Type)] ドロップダウン リスト ボックスから、[Cisco VG200] を選択し、[次へ(Next)] をクリックします。 [ゲートウェイの設定(Gateway Configuration)] ウィンドウが表示されます。 ステップ 4 すべてのフィールドに値を入力します。 VG200 ゲートウェイ テンプレートのフィールドの説明を参照してください。 ステップ 5 [保存(Save)] をクリックします。 挿入が完了すると、新しいフィールドがペインに表示されます。 ステップ 6 [サブユニット(Subunit)] フィールドで、次の各サブユニット フィールドに適切なタイプを選択します。
- [VIC-2FXS]:Foreign Exchange Station(FXS)音声インターフェイス カード
- [VIC-2FXO]:Foreign Exchange Office(FXO)音声インターフェイス カード
- [VWIC-1MFT-T1]:T1 CAS または T1 PRI 用のエンドポイントを 1 つ備えた音声 WAN インターフェイス カード
- [VWIC-2MFT-T1]:T1 CAS または T1 PRI 用のエンドポイントを 2 つ備えた音声 WAN インターフェイス カード
- [VWIC-1MFT-E1]:E1 PRI 用のエンドポイントを 1 つ備えた音声 WAN インターフェイス カード
- [VWIC-2MFT-E1]:E1 PRI 用のエンドポイントを 2 つ備えた音声 WAN インターフェイス カード
ステップ 7 [保存(Save)] をクリックします。 更新が完了したことが [ステータス(Status)] によって示されると、[サブユニット(Subunit)] ドロップダウン リスト ボックスの右側にエンドポイント ID がリンクとして表示されます。 ステップ 8 エンドポイント ID(たとえば、1/0/0)をクリックして、デバイス プロトコル情報を設定し、取り付けられている VIC のタイプ用のポートを追加します。 詳細については、次の手順を参照してください。
ステップ 9 [リセット(Reset)] をクリックして、ゲートウェイをリセットし、変更内容を適用します。
次の作業
必要に応じて、エンドポイント情報とポートを引き続き設定します。
Cisco VG200 ゲートウェイ テンプレートへのポートの追加
- VG200 ゲートウェイ テンプレートへの FXS ポートの追加
- VG200 ゲートウェイ テンプレートへの FXO ポートの追加
- VG200 ゲートウェイ テンプレートへの Digital Access T1(T1-CAS)ポートの追加
- VG200 ゲートウェイ テンプレートへの T1 PRI または E1 PRI デバイスの追加
関連タスク
VG200 ゲートウェイ テンプレートへの FXS ポートの追加
Foreign Exchange Station(FXS)ポートは、任意の POTS デバイスとの接続に使用できます。 VG200 ゲートウェイ テンプレートに FXS ポートを追加する手順は、次のとおりです。
はじめる前に手順ポートを設定する前に、VG200 ゲートウェイ テンプレートを追加する必要があります。 詳細については、Cisco VG200 ゲートウェイ テンプレートの作成を参照してください。
ステップ 1 FXS ポートを追加するゲートウェイ テンプレートを検索します。 ステップ 2 [ゲートウェイテンプレートの設定(Gateway Template Configuration)] ウィンドウから、設定する FXS VIC のエンドポイント ID をクリックします。 ウィンドウが更新され、[ゲートウェイテンプレートの設定(Gateway Template Configuration)] ウィンドウにエンドポイントのアイコンが表示されます。 ステップ 3 [デバイス情報(Device Information)] と [ポート情報(Port Information)] に適切な設定値を入力し、[保存(Save)] をクリックします。
(注) POTS ポートを追加した後、ウィンドウが更新され、ウィンドウの下部にその POTS ポートの情報が表示されます。 左側のパネルの [電話番号情報(Directory Number Information)] 領域に、[新規DNを追加(Add a new DN)] リンクが表示されます。
ステップ 4 [新規DNを追加(Add a new DN)] をクリックして、POTS ポートに電話番号を追加します。または、別のタイプのポートを設定した場合は、ステップ 6 に進んでください。 ステップ 5 ポートを追加した VG200 ゲートウェイの [ゲートウェイテンプレートの設定(Gateway Template Configuration)] メイン ウィンドウに戻るには、[関連リンク(Related Links)] ドロップダウン リスト ボックスで [MGCP設定に戻る(Back to MGCP Configuration)] を選択し、[移動(Go)] をクリックします。 ステップ 6 [リセット(Reset)] をクリックして、ゲートウェイをリセットし、変更内容を適用します。 ステップ 7 ステップ 1 ~ステップ 5 を繰り返して、他の FXS ポートを追加します。
関連情報
VG200 ゲートウェイ テンプレートへの FXO ポートの追加
Foreign Exchange Office(FXO)ポートは、セントラル オフィスまたは PBX との接続に使用されます。 BAT を使用して、VG200 ゲートウェイ テンプレートにループ スタートまたはグラウンド スタート用の FXO ポートを追加し、設定することができます。
(注)
Cisco Unified Communications Manager は、すべてのループ スタート トランクには、Positive Disconnect Supervision(確実な接続解除監視)がないものと想定します。 Cisco Unified Communications Manager サーバのフェイルオーバー時にアクティブ コールを保持できるように、確実な接続解除監視を備えたトランクを、グラウンド スタートとして設定してください。
はじめる前に手順ポートを設定する前に、VG200 ゲートウェイ テンプレートを追加する必要があります。 詳細については、Cisco VG200 ゲートウェイ テンプレートの作成を参照してください。
ステップ 1 FXS ポートを追加するゲートウェイ テンプレートを検索します。 ステップ 2 [ゲートウェイの設定(Gateway Configuration)] ウィンドウから、設定する FXO ポートのエンドポイント ID をクリックします。 ステップ 3 [ポートタイプ(Port Type)] ドロップダウン リスト ボックスから、[Ground Start] か [Loop Start] のどちらかを選択します。
(注) VIC-2FXO ポートの両方のエンドポイント ID に同じポート タイプを選択する必要があります。 異なるポート タイプを選択すると、メッセージが表示されます。
ステップ 4 [ゲートウェイの設定(Gateway Configuration)] と [ポート情報(Port Information)] に適切な設定値を入力し、[保存(Save)] をクリックします。 フィールドの説明については、FXS/FXO ポート設定のフィールドの説明を参照してください。 ステップ 5 ポートを追加したゲートウェイの VG200 ゲートウェイ設定のメイン ウィンドウに戻るには、[関連リンク(Related Links)] ドロップダウン リスト ボックスで [MGCP設定に戻る(Back to MGCP Configuration)] を選択し、[移動(Go)] をクリックします。 ステップ 6 [リセット(Reset)] をクリックして、ゲートウェイをリセットし、変更内容を適用します。 ステップ 7 他の FXO ポートを追加するには、ステップ 2 ~ステップ 4 を繰り返します。
関連タスク
関連情報
VG200 ゲートウェイ テンプレートへの Digital Access T1(T1-CAS)ポートの追加
手順
ステップ 1 FXS ポートを追加するゲートウェイ テンプレートを検索します。 ステップ 2 [ゲートウェイの設定(Gateway Configuration)] ウィンドウから、設定する Digital Access T1(T1-CAS)ポートのエンドポイント ID をクリックします。 [デバイスプロトコル(Device Protocol)] ドロップダウン リスト ボックスで、[デジタルアクセスT1(Digital Access T1)] を選択し、[次へ(Next)] をクリックします。
ステップ 3 適切なゲートウェイの設定値を入力し、[保存(Save)] をクリックします。 詳細については、Cisco VG200 ゲートウェイ テンプレート上の Digital Access T1 トランクのフィールドの説明を参照してください。 ステップ 4 [リセット(Reset)] をクリックして、ゲートウェイをリセットし、変更内容を適用します。 ステップ 5 選択するポート タイプの適切な設定値については、ポートの設定を参照してください。
関連タスク
関連情報
VG200 ゲートウェイ テンプレートへの T1 PRI または E1 PRI デバイスの追加
手順
ステップ 1 FXS ポートを追加するゲートウェイ テンプレートを検索します。 ステップ 2 [ゲートウェイの設定(Gateway Configuration)] ウィンドウから、設定する T1 PRI または E1 PRI ポートのエンドポイント ID をクリックします。 ステップ 3 T1 PRI または E1 PRI デバイス プロトコルの設定値を設定します。 フィールドの説明については、Cisco VG200 ゲートウェイ テンプレート上の T1 PRI または E1 PRI トランクのフィールドの説明を参照してください。 ステップ 4 [保存(Save)] をクリックします。 ステップ 5 [リセット(Reset)] をクリックして、ゲートウェイをリセットし、変更内容を適用します。
関連タスク
関連情報
Cisco Catalyst 6000(FXS)ゲートウェイ テンプレートの作成
手順
ステップ 1 [ゲートウェイの検索/一覧表示(Find and List Gateway)] の順に選択します。 ウィンドウが表示されます。 ステップ 2 [新規追加(Add New)] をクリックします。 [新規ゲートウェイを追加(Add a New Gateway)] ウィンドウが表示されます。 ステップ 3 [ゲートウェイタイプ(Gateway Type)] ドロップダウン リスト ボックスから、[Cisco Catalyst 6000 24 Port FXS Gateway] を選択します。 [ゲートウェイの設定(Gateway Configuration)] ウィンドウが表示されます。 ステップ 4 [テンプレート名(Template Name)] フィールドに、このテンプレートの固有の名前を入力します。 ステップ 5 フィールドに設定値を入力し、[保存(Save)] をクリックします。 フィールドの説明については、Cisco Catalyst 6000 24 ポート FXS ゲートウェイ テンプレートのフィールドの説明を参照してください。 ステップ 6 [新規ポートを追加(Add a New Port)] をクリックします。 別のウィンドウに、ポート設定のダイアログが開きます。 ステップ 7 ドロップダウン リスト ボックスから、設定するゲートウェイ モデルに基づくポート タイプとして [POTS] を選択します。 フィールドの説明については、Cisco VG200 ゲートウェイ テンプレート上の T1 PRI または E1 PRI トランクのフィールドの説明を参照してください。 ステップ 8 適切なポートの設定値を入力し、[保存(Save)] をクリックします。 フィールドの説明については、POTS ポートの設定を参照してください。 POTS ポートを追加した場合、ウィンドウの内容が更新され、ウィンドウの左側のリストに、その POTS ポートが表示されます。 新しいポートの右側に、[DNを追加(Add DN)] リンクが表示されます。 ステップ 9 FXS ポートに電話番号を追加するには、[DNの追加(Add DN)] をクリックします。 ステップ 10 [保存(Save)] をクリックします。 更新が完了したことが [ステータス(Status)] に示されると、[ゲートウェイの検索/一覧表示(Find and List Gateways)] ウィンドウにテンプレートが表示されます。 [検索/一覧表示(Find and List)] ウィンドウに戻るには、ウィンドウの右上隅にある [関連リンク(Related Links)] ドロップダウン リスト ボックスから、[検索/一覧表示に戻る(Back to Find and List)] を選択します。
関連情報
Cisco VG224 ゲートウェイ テンプレートの作成
手順
ステップ 1 の順に選択します。 [ゲートウェイの検索/一覧表示(Find and List Gateway)] ウィンドウが表示されます。
ステップ 2 [新規追加(Add New)] をクリックします。 [新規ゲートウェイを追加(Add a New Gateway)] ウィンドウが表示されます。 ステップ 3 [ゲートウェイタイプ(Gateway Type)] ドロップダウン リスト ボックスから、[Cisco VG224] を選択し、[次へ(Next)] をクリックします。 次の[新規ゲートウェイの追加(Add a New Gateway)] ウィンドウが表示されます。 ステップ 4 [プロトコル(Protocol)] ドロップダウン リスト ボックスから、MGCP または SCCP を選択し、[次へ(Next)] をクリックします。 [ゲートウェイの設定(Gateway Configuration)] ウィンドウが表示されます。 ステップ 5 すべてのフィールドに値を入力し、[保存(Save)] をクリックします。 フィールドの説明については、VG224 ゲートウェイ テンプレートのフィールドの説明を参照してください。 挿入が完了すると、新しいフィールドがペインに表示されます。 ステップ 6 [サブユニット0(Subunit 0)] フィールドで、サブユニット フィールドに適切なタイプをドロップダウン リスト ボックスから選択し、[保存(Save)] をクリックします。 更新が完了したことが [ステータス(Status)] によって示されると、[サブユニット(Subunit)] ドロップダウン リスト ボックスの右側にエンドポイント ID がリンクとして表示されます。 ステップ 7 エンドポイント ID(たとえば、1/0/0)をクリックして、デバイス プロトコル情報を設定し、取り付けられている VIC のタイプ用のポートを追加します。 ステップ 8 [リセット(Reset)] をクリックして、ゲートウェイをリセットし、変更内容を適用します。
次の作業必要に応じて、エンドポイント情報とポートを引き続き設定します。
関連情報
VG224 ゲートウェイ テンプレートへの FXS ポートの追加
手順BAT を使用して、VG224 ゲートウェイ テンプレートに FXS ポートを追加します。 Foreign Exchange Station(FXS)ポートは、POTS デバイスとの接続に使用されます。
ステップ 1 FXS ポートを追加するゲートウェイ テンプレートを検索します。 ステップ 2 [ゲートウェイテンプレートの設定(Gateway Template Configuration)] ウィンドウから、設定する FXS VIC のエンドポイント ID をクリックします。 ウィンドウが更新され、[ゲートウェイテンプレートの設定(Gateway Template Configuration)] ウィンドウにエンドポイントのアイコンが表示されます。 ステップ 3 [デバイス情報(Device Information)] と [ポート情報(Port Information)] に適切な設定値を入力し、[保存(Save)] をクリックします。
(注) POTS ポートを追加した後、ウィンドウが更新され、ウィンドウの下部にその POTS ポートの情報が表示されます。 左側のパネルの [電話番号情報(Directory Number Information)] 領域に、[新規DNを追加(Add a new DN)] リンクが表示されます。
ステップ 4 [新規DNを追加(Add a new DN)] をクリックして、POTS ポートに電話番号を追加します。または、別のタイプのポートを設定した場合は、ステップ 6 に進んでください。 ステップ 5 ポートを追加した VG224 ゲートウェイの [ゲートウェイテンプレートの設定(Gateway Template Configuration)] メイン ウィンドウに戻るには、[関連リンク(Related Links)] ドロップダウン リスト ボックスで [MGCP設定に戻る(Back to MGCP Configuration)] を選択し、[移動(Go)] をクリックします。 ステップ 6 [リセット(Reset)] をクリックして、ゲートウェイをリセットし、変更内容を適用します。 ステップ 7 さらに FXS ポートを追加するには、ステップ 1~ステップ 5を繰り返します。
関連情報
Cisco VG202 または VG204 ゲートウェイ テンプレートの作成
手順
ステップ 1 の順に選択します。 [ゲートウェイの検索/一覧表示(Find and List Gateway)] ウィンドウが表示されます。
ステップ 2 [新規追加(Add New)] をクリックします。 [新規ゲートウェイを追加(Add a New Gateway)] ウィンドウが表示されます。 ステップ 3 [ゲートウェイタイプ(Gateway Type)] ドロップダウン リスト ボックスから、[Cisco VG202] または [VG204] を選択し、[次へ(Next)] をクリックします。 次の[新規ゲートウェイの追加(Add a New Gateway)] ウィンドウが表示されます。 ステップ 4 [プロトコル(Protocol)] ドロップダウン リスト ボックスから、MGCP または SCCP を選択し、[次へ(Next)] をクリックします。 [ゲートウェイの設定(Gateway Configuration)] ウィンドウが表示されます。 ステップ 5 すべてのフィールドに値を入力し、[保存(Save)] をクリックします。 フィールドの説明については、VG202 および VG204 ゲートウェイ テンプレートのフィールドの説明を参照してください。 挿入が完了すると、新しい [サブユニット0(Subunit 0)] フィールドがペインに表示されます。 ステップ 6 [サブユニット0(Subunit 0)] フィールドで、サブユニット フィールドに適切なタイプをドロップダウン リスト ボックスから選択し、[保存(Save)] をクリックします。 更新が完了したことが [ステータス(Status)] によって示されると、[サブユニット(Subunit)] ドロップダウン リスト ボックスの右側にエンドポイント ID がリンクとして表示されます。 ステップ 7 エンドポイント ID (たとえば、0/0)をクリックし、デバイス プロトコル情報を設定し、インストールした VIC タイプのポートを追加します。 ステップ 8 [リセット(Reset)] をクリックして、ゲートウェイをリセットし、変更内容を適用します。
次の作業必要に応じて、エンドポイント情報とポートを引き続き設定します。
関連情報
VG202 または VG204 ゲートウェイ テンプレートへの FXS ポートの追加
BAT を使用して、VG202 または VG204 ゲートウェイ テンプレートに FXS ポートを追加します。 Foreign Exchange Station(FXS)ポートは、任意の POTS デバイスとの接続に使用できます。
はじめる前に手順ポートを設定する前に、VG202 または VG204 ゲートウェイ テンプレートを追加する必要があります。 詳細については、Cisco VG202 または VG204 ゲートウェイ テンプレートの作成を参照してください。
ステップ 1 FXS ポートを追加するゲートウェイ テンプレートを検索します。 ステップ 2 [ゲートウェイテンプレートの設定(Gateway Template Configuration)] ウィンドウから、設定する FXS VIC のエンドポイント ID をクリックします。 ウィンドウが更新され、[ゲートウェイテンプレートの設定(Gateway Template Configuration)] ウィンドウにエンドポイントのアイコンが表示されます。 ステップ 3 [デバイス情報(Device Information)] と [ポート情報(Port Information)] に適切な設定値を入力し、[保存(Save)] をクリックします。
(注) POTS ポートを追加した後、ウィンドウが更新され、ウィンドウの下部にその POTS ポートの情報が表示されます。 左側のパネルの [電話番号情報(Directory Number Information)] 領域に、[新規DNを追加(Add a new DN)] リンクが表示されます。
ステップ 4 [新規DNを追加(Add a new DN)] をクリックして、POTS ポートに電話番号を追加します。または、別のタイプのポートを設定した場合は、ステップ 6 に進んでください。 ステップ 5 ポートを追加した VG202 または VG204 ゲートウェイの [ゲートウェイテンプレートの設定(Gateway Template Configuration)] メイン ウィンドウに戻るには、[関連リンク(Related Links)] ドロップダウン リスト ボックスで [MGCP設定に戻る(Back to MGCP Configuration)] を選択し、[移動(Go)] をクリックします(MGCP ゲートウェイを設定している場合)。 ステップ 6 [リセット(Reset)] をクリックして、ゲートウェイをリセットし、変更内容を適用します。 ステップ 7 ステップ 2 ~ステップ 5 を繰り返して、他の FXS ポートを追加します。
関連情報
ゲートウェイの設定
- VG200 ゲートウェイ テンプレートのフィールドの説明
- VG224 ゲートウェイ テンプレートのフィールドの説明
- VG202 および VG204 ゲートウェイ テンプレートのフィールドの説明
- Cisco Catalyst 6000 24 ポート FXS ゲートウェイ テンプレートのフィールドの説明
- FXS/FXO ポート設定のフィールドの説明
- Cisco VG200 ゲートウェイ テンプレート上の Digital Access T1 トランクのフィールドの説明
- Cisco VG200 ゲートウェイ テンプレート上の T1 PRI または E1 PRI トランクのフィールドの説明
関連資料
関連情報
VG200 ゲートウェイ テンプレートのフィールドの説明
次の表に、VG200 ゲートウェイ テンプレート設定の詳細な説明があります。
表 1 VG200 ゲートウェイの設定 フィールド
説明
[テンプレート名(Template name)]
Cisco VG200 ゲートウェイ テンプレートを識別する最大 64 文字の名前を入力します。
[説明(Description)]
デバイスの目的を明確にした説明を入力します。
[Cisco Unified CMグループ( Cisco Unified Communications Manager Group)]
ドロップダウン リスト ボックスで、 Cisco Unified Communications Manager 冗長グループを選択します。
Cisco Unified Communications Manager 冗長グループには、最大 3 つの Cisco Unified Communications Manager を優先順に並べたリストが含まれています。 リスト内の最初の Cisco Unified Communications Manager は、プライマリ Cisco Unified Communications Manager になります。 プライマリ Cisco Unified Communications Manager が使用できないか、障害が起きた場合、ゲートウェイは、リスト内の次の Cisco Unified Communications Manager に接続しようとします。
[設定済みのスロット、VICおよびエンドポイント(Configured Slots, VICs and Endpoints)]
(注) 一部の VIC で、開始ポート番号を指定する必要があります。 たとえば、Subunit 0 の VIC に 0 から始まるポートが 2 つ(0 と 1)ある場合、Subunit 1 の VIC には 1 より大きい番号から始まるポートが 2 つ(2 と 3、または 4 と 5)存在する必要があります。
(注) VG200 ゲートウェイにはスロットが 1 つだけあります。
[スロット1のモジュール(Module in Slot 1)]
VG200 ゲートウェイで使用可能なスロットの場合は、次のモジュール タイプから選択します。
- [NM-1V]:Network Module-1Voice には、Sub-Unit 0 に、FXS または FXO 用の 1 枚の音声インターフェイス カード(VIC)があります。
- [NM-2V]:Network Module-2Voice には、FXS または FXO 用に、Sub-Unit 0 に 1 枚、Sub-Unit 1 に 1 枚、合計 2 枚の VIC があります。
- [NM-HDV]:Network Module-High Density Voice には、T1 CAS、T1 PRI、または E1 PRI 用に、Sub-Unit 0 に 1 枚の VIC があります。
- [なし(None)]:ネットワーク モジュールが取り付けられていません。
[プロダクト固有の設定(Product Specific Configuration)]
(ゲートウェイ メーカーによって指定される、モデル固有の設定フィールド)
[プロダクト固有の設定(Product Specific Configuration)] の下にあるモデル固有のフィールドは、ゲートウェイ メーカーによって指定されます。 これらのフィールドは動的に設定されるため、予告なく変更される場合があります。
フィールドの説明とプロダクト固有の設定項目のヘルプを表示するには、[プロダクト固有の設定(Product Specific Configuration)] 見出しの右側にある情報アイコン [?] をクリックして、ポップアップ ダイアログ ボックスでヘルプを表示します。
詳細な情報が必要な場合は、設定するゲートウェイのマニュアルを参照するか、製造元に連絡してください。
VG224 ゲートウェイ テンプレートのフィールドの説明
次の表に、VG224 ゲートウェイ テンプレート設定の詳細な説明があります。
表 2 VG224 ゲートウェイの設定 フィールド
説明
[テンプレート名(Template name)]
Cisco VG224 ゲートウェイ テンプレートを識別する最大 64 文字の名前を入力します。
[説明(Description)]
デバイスの目的を明確にした説明を入力します。
[Cisco Unified CMグループ( Cisco Unified Communications Manager Group)]
ドロップダウン リスト ボックスで、 Cisco Unified Communications Manager 冗長グループを選択します。
Cisco Unified Communications Manager 冗長グループには、最大 3 つの Cisco Unified Communications Manager を優先順に並べたリストが含まれています。 リスト内の最初の Cisco Unified Communications Manager は、プライマリ Cisco Unified Communications Manager になります。 プライマリ Cisco Unified Communications Manager が使用できないか、障害が起きた場合、ゲートウェイは、リスト内の次の Cisco Unified Communications Manager に接続しようとします。
[設定済みのスロット、VICおよびエンドポイント(Configured Slots, VICs and Endpoints)]
[スロット2のモジュール(Module in Slot 2)]
VG224 ゲートウェイで使用可能なスロットに対し、ドロップダウン リスト ボックスから [ANALOG] を選択します。
[サブユニット0(Subunit 0)]
VG224 ゲートウェイで使用可能なサブユニット 0 に対し、ドロップダウン リスト ボックスから [24FXS] をサブユニットとして選択します。
(注) VG224 ゲートウェイの場合は、[スロット2のモジュール(Module in Slot 2)] と [サブユニット0(Subunit 0)] だけが使用可能です。
VG202 および VG204 ゲートウェイ テンプレートのフィールドの説明
次の表に、VG202 と VG204 ゲートウェイ テンプレート設定の詳細な説明があります。
表 3 VG202 および VG204 ゲートウェイの設定 フィールド
説明
[テンプレート名(Template name)]
Cisco VG202 または VG204 ゲートウェイ テンプレートを識別する最大 64 文字の名前を入力します。
[説明(Description)]
デバイスの目的を明確にした説明を入力します。
[Cisco Unified CMグループ( Cisco Unified Communications Manager Group)]
ドロップダウン リスト ボックスで、 Cisco Unified Communications Manager 冗長グループを選択します。
Cisco Unified Communications Manager 冗長グループには、最大 3 つの Cisco Unified Communications Manager を優先順に並べたリストが含まれています。 リスト内の最初の Cisco Unified Communications Manager は、プライマリ Cisco Unified Communications Manager になります。 プライマリ Cisco Unified Communications Manager が使用できないか、障害が起きた場合、ゲートウェイは、リスト内の次の Cisco Unified Communications Manager に接続しようとします。
[設定済みのスロット、VICおよびエンドポイント(Configured Slots, VICs and Endpoints)]
[スロット0のモジュール(Module in Slot 0)]
VG202 または VG204 ゲートウェイで使用可能なスロットに対し、ドロップダウン リスト ボックスから [ANALOG] を選択します。
[サブユニット0(Subunit 0)]
VG202 または VG204 ゲートウェイで使用可能なサブユニット 0 に対し、ドロップダウン リスト ボックスから [2FXS] をサブユニットとして選択します。
(注) VG202 および VG204 ゲートウェイの場合は、[スロット0のモジュール(Module in Slot 0)] と [Subunit 0] だけが使用可能です。
Cisco Catalyst 6000 24 ポート FXS ゲートウェイ テンプレートのフィールドの説明
次の表に、Cisco Catalyst 6000 24 ポート FXS ゲートウェイ テンプレートの設定を示します。
表 4 Cisco Catalyst 6000 24 ポート FXS ゲートウェイの設定 フィールド
説明
[説明(Description)]
デバイスの目的を入力します。 説明には、任意の言語で最大 50 文字を指定できますが、二重引用符(")、パーセント記号(%)、アンパサンド(&)、バックスラッシュ(\)、山カッコ(<>)は使用できません。
[デバイスプール(Device Pool)]
ドロップダウン リスト ボックスから、適切なデバイス プールを選択します。
デバイス プールは、このデバイスのプロパティの集合(たとえば、Cisco Unified Communications Manager グループ、日付/時刻グループ、地域、およびデバイスの自動登録用のコーリング サーチ スペース)を指定します。
[共通デバイス設定(Common Device Configuration)]
このゲートウェイに割り当てる共通デバイス設定を選択します。 共通デバイス設定には、特定のユーザに関連付けられた属性(サービスまたは機能)が含まれています。 [共通デバイス設定(Common Device Configuration)] ウィンドウで共通のデバイス設定を行います。 共通デバイス設定の詳細については、『Cisco Unified Communications Manager アドミニストレーション ガイド』を参照してください。
共通デバイス設定の設定値を参照するには、[詳細の表示(View Details)] リンクをクリックします。
[メディアリソースグループリスト(Media Resource Group List)]
メディア リソース グループを優先順に並べたグループが表示されます。 アプリケーションは、メディア リソース グループ リストで定義された優先順位に従って、使用可能なメディア リソースから、必要なメディア リソース、たとえば、保留音サーバを選択します。
[ネットワーク保留MOH音源(Network Hold MOH Audio Source)]
このグループの IP ゲートウェイのネットワーク保留オーディオ ソースを選択します。
ネットワーク保留オーディオ ソースは、システムがコールを保留にするとき(たとえば、ユーザがコールを転送したときや、コール パークにしたとき)に再生される音楽のオーディオ ソースを特定します。
[コーリングサーチスペース(Calling Search Space)]
ドロップダウン リスト ボックスから、適切なコーリング サーチ スペースを選択します。 コーリング サーチ スペースは、収集された(発信)番号のルート指定方法を決定するために検索されるパーティションの集合を指定します。
Max List Box Items エンタープライズ パラメータを使用して、このドロップダウン リスト ボックスで表示するコーリング サーチ スペースの数を設定できます。 Max List Box Items エンタープライズ パラメータで指定するより多くのコーリング サーチ スペースが存在する場合は、ドロップダウン リスト ボックスの横に省略記号のボタン(...)が表示されます。 [...] ボタンをクリックすると、[コーリングサーチスペースの選択(Select Calling Search Space)] ウィンドウが表示されます。 [名前に次を含む項目を表示(List items where Name contains)] フィールドに、コーリング サーチ スペース名の一部を入力します。 [使用する項目を選択(Select item to use)] ボックスに表示されるコーリング サーチ スペースのリストで、目的のコーリング サーチ スペース名をクリックし、[OK] をクリックします。
(注) リスト ボックスの最大項目数を設定するには、
の順に選択し、Unified CMAdmin パラメータを選択します。[AARコーリングサーチスペース(AAR Calling Search Space)]
自動代替ルーティング(AAR)の実行時にデバイスが使用するコーリング サーチ スペースを選択します。 AAR コーリング サーチ スペースは、帯域幅不足によってコールがブロックされないように、収集された(発信)番号のルーティング方法を決定するために検索されるルート パーティションの集合を指定します。
[ロケーション(Location)]
このデバイスの適切なロケーションを選択します。 ロケーションは、このロケーションとの間のコールに使用可能な帯域幅の合計を指定します。 ロケーションを [なし(None)] に設定すると、ロケーション機能がこのデバイスの消費する帯域幅を管理しないことを示します。
[AARグループ(AAR Group)]
このデバイスの自動代替ルーティング(AAR)グループを選択します。 AAR グループは、帯域幅不足のためにコールがブロックされないように、コールをルーティングするためのプレフィックス番号を提供します。 AAR グループ設定を [なし(None)] にすると、ブロックされたコールの再ルーティングは行われません。
[ネットワークロケール(Network Locale)]
ドロップダウン リスト ボックスから、そのゲートウェイに関連したロケールを選択します。 そのネットワーク ロケールは、特定ロケーションのハードウェアをサポートする一連の詳細情報を識別します。 ネットワーク ロケールには、特定の地域でデバイスが使用するトーンおよび断続周期の定義が含まれています。
(注) 関連するデバイスによってサポートされているインストール済みのネットワーク ロケールだけを選択してください。 このリストにはこの設定に使用できるネットワーク ロケールがすべて示されていますが、そのすべてがインストールされているわけではありません。 ファームウェアでサポートされていないネットワーク ロケールと関連付けられると、デバイスは起動できません。
[信頼されたリレーポイントを使用(Use Trusted Relay Point)]
ドロップダウン リスト ボックスで、 Cisco Unified Communications Manager が信頼されたリレーポイント(TRP)のデバイスをこのメディア エンドポイントで挿入するかどうかについて、有効化または無効化を指定します。 次のいずれかの値を選択します。
- [デフォルト(Default)]:この値を選択すると、デバイスでは、このデバイスに関連付けられた共通デバイス設定の [信頼されたリレーポイントを使用(Use Trusted Relay Point)] の設定値が使用されます。
- [オフ(Off)]:この値を選択すると、このデバイスに対して TRP が使用不可になります。 この設定値は、このデバイスに関連付けられた共通デバイス設定の [信頼されたリレーポイントを使用(Use Trusted Relay Point)] の設定値よりも優先されます。
- [オン(On)]:この値を選択すると、このデバイスに対して TRP が使用可能になります。 この設定値は、このデバイスに関連付けられた共通デバイス設定の [信頼されたリレーポイントを使用(Use Trusted Relay Point)] の設定値よりも優先されます。
信頼されたリレー ポイント(TRP)デバイスには、Trusted Relay Point というラベルの付いた MTP またはトランスコーダ デバイスが指定されます。
エンドポイントに複数のリソース(たとえば、トランスコーダや RSVP エージェント)が必要な場合は、 Cisco Unified Communications Manager により、TRP は関連付けられたエンドポイント デバイスに最も近い位置に配置されます。
エンドポイントに TRP と MTP の両方が必要な場合、TRP は必須の MTP として使用されます。
コールの動作の詳細については、『 Cisco Unified Communications Manager システム ガイド』で TRP の挿入に関する要件の説明を参照してください。
[ポート選択順序(Port Selection Order)]
ポートが選択される順序を選択します。 どちらのポート順序を使用すべきかわからない場合は、[上から(TOP_DOWN)] を選択してください。
[ロード情報(Load Information)]
ゲートウェイに適切なファームウェア ロード情報を入力します。
このフィールドに入力された値は、このゲートウェイのデフォルト値を上書きします。
[発呼側名にUTF-8を転送(Transmit UTF-8 for Calling Party Name)]
このデバイスは、デバイスのデバイス プールのロケール設定を使用して、Unicode を送信するかどうか、および受信した Unicode 情報を変換するかどうかを決定します。
送信デバイスでは、このチェックボックスをオンにした場合に、デバイスのデバイス プールのユーザ ロケール設定が着信側電話機のユーザ ロケール設定に一致すると、デバイスは Unicode を送信します。 ユーザ ロケール設定が一致しない場合、デバイスは ASCII を送信します。
受信デバイスは、送信デバイスのデバイス プールのユーザ ロケール設定に基づいて、着信する Unicode 文字を変換します。 ユーザ ロケール設定が着信側電話機のユーザ ロケールに一致した場合、電話機には文字が表示されます。
(注) トランクの両端で設定されたユーザ ロケールが同じ言語グループに属していない場合、電話機には不適切な文字が表示されることがあります。
[発呼側トランスフォーメーションCSS(Calling Party Transformation CSS)]
この設定により、デバイスの発呼側の番号をローカライズできるようになります。 選択する発呼側トランスフォーメーション CSS に、このデバイスに割り当てる発呼側トランスフォーメーション パターンが含まれていることを確認してください。
発呼側トランスフォーメーション CSS が存在するパーティションにパターンを割り当てる場合、デバイスは発呼側トランスフォーメーション パターンの属性を使用します。
設定情報の詳細については、『 Cisco Unified Communications Manager 機能およびサービス ガイド』を参照してください。
[デバイスプールの発呼側トランスフォーメーションCSSを使用(Use Device Pool Calling Party Transformation CSS)]
デバイスに割り当てられているデバイス プールで設定された発呼側トランスフォーメーション CSS を使用するには、このチェックボックスをオンにします。 このチェックボックスをオフにすると、デバイスは、デバイスの設定ウィンドウで設定された発呼側トランスフォーメーション CSS を使用します。
[MLPP情報(Multilevel Precedence and Preemption (MLPP) Information)]
[MLPPドメイン(MLPP Domain)]
ドロップダウン リスト ボックスから、このデバイスに関連付ける MLPP ドメインを選択します。 この値を [<なし(None)>] のままにすると、このデバイスはデバイスのデバイス プールに設定された値から MLPP ドメインを継承します。 デバイス プールに MLPP ドメインの設定がない場合、このデバイスの MLPP ドメインは、MLPP Domain Identifier エンタープライズ パラメータに設定された値から継承されます。
[MLPP通知(MLPP Indication)]
このデバイス タイプには、この設定はありません。
[MLPPプリエンプション(MLPP Preemption)]
このデバイス タイプには、この設定はありません。
[位置情報の設定(Geo Location Configuration)]
[位置情報(Geo Location)]
ドロップダウン リスト ボックスから、位置情報を選択します。
未指定の位置情報を選択できます。これは、このデバイスを位置情報に関連付けないことを示します。
メニュー オプションで設定された位置情報を選択することもできます。
[位置情報フィルタ(Geo Location Filter)]
ドロップダウン リスト ボックスから、位置情報フィルタを選択します。
この値を [<なし(None)>] のままにすると、このデバイスには位置情報フィルタは適用されません。
メニュー オプションで設定した位置情報フィルタを選択することもできます。
FXS/FXO ポート設定のフィールドの説明
次の表で、FXS/FXO ポートの設定について詳しく説明します。
VG200 ゲートウェイの場合、すべてのスイッチ エミュレーション タイプが、ネットワーク側をサポートしているわけではありません。 ゲートウェイ スイッチ タイプの設定内容によって、ネットワーク側を設定できるかどうかが決まります。
表 5 FXS/FXO ポートの設定 フィールド
説明
[デバイス情報(Device Information)]
[エンドポイント名(End-Point Name)]
VG200 ゲートウェイの場合、ここは表示専用フィールドです。 Cisco Unified Communications Manager が生成する、VG200 アナログ インターフェイスを一意に識別する文字列が表示されます。
[説明(Description)]
Cisco Unified Communications Manager は、アナログ MGCP の説明を一意に識別する文字列を生成します。
次の例を参考にしてください。
AALN/S0/SU1/1@domain.com
このフィールドは、編集可能です。 説明には、任意の言語で最大 50 文字を指定できますが、二重引用符(")、パーセント記号(%)、アンパサンド(&)、バックスラッシュ(\)、山カッコ(<>)は使用できません。
[デバイスプール(Device Pool)]
ドロップダウン リスト ボックスから、適切なデバイス プールを選択します。
デバイス プールは、このデバイスのプロパティの集合(たとえば、Communications Manager グループ、日付/時刻グループ、地域、およびデバイスの自動登録用のコーリング サーチ スペース)を指定します。
[メディアリソースグループリスト(Media Resource Group List)]
メディア リソース グループを優先順に並べたグループが表示されます。 アプリケーションは、メディア リソース グループ リストで定義された優先順位に従って、使用可能なメディア リソースの中から、必要なメディア リソース、たとえば、保留音サーバを選択します。
[パケットキャプチャモード(Packet Capture Mode)](Cisco IOS MGCP ゲートウェイのみ)
このフィールドを設定するのは、Cisco IOS MGCP ゲートウェイに関する暗号化されたシグナリング情報のトラブルシューティングが必要な場合だけです。 パケット キャプチャリングを設定すると、コール処理中断の原因となります。 このフィールドの詳細については、『 Cisco Unified Communications Manager セキュリティ ガイド』を参照してください。
[パケットキャプチャ時間(Packet Capture Duration)](Cisco IOS MGCP ゲートウェイのみ)
このフィールドを設定するのは、Cisco IOS MGCP ゲートウェイに関する暗号化されたシグナリング情報のトラブルシューティングが必要な場合だけです。 パケット キャプチャリングを設定すると、コール処理中断の原因となります。 このフィールドの詳細については、『 Cisco Unified Communications Manager セキュリティ ガイド』を参照してください。
[コーリングサーチスペース(Calling Search Space)]
ドロップダウン リスト ボックスから、適切なコーリング サーチ スペースを選択します。 コーリング サーチ スペースは、収集された(発信)番号のルート指定方法を決定するために検索されるルート パーティションの集合から構成されます。
[AARコーリングサーチスペース(AAR Calling Search Space)]
自動代替ルーティング(AAR)の実行時にデバイスが使用するコーリング サーチ スペースを選択します。 AAR コーリング サーチ スペースは、帯域幅不足によってコールがブロックされないように、収集された(発信)番号のルーティング方法を決定するために検索されるルート パーティションの集合を指定します。
[ロケーション(Location)]
ロケーションは、コール アドミッション制御(CAC)を中央集中型コール処理システムに実装する際に使用します。 CAC では、ロケーション間のリンクを経由する際にオーディオ コールとビデオ コールで使用できる帯域幅を制限することにより、オーディオ品質とビデオのアベイラビリティを調整できます。 ロケーションは、このロケーションとの間のコールに使用可能な帯域幅の合計を指定します。
ドロップダウン リスト ボックスで、このデバイスに適切なロケーションを選択します。
ロケーションに [ハブなし(Hub_None)] を設定すると、そのロケーションの機能では、このデバイスが消費する帯域幅を把握しません。 [ファントム(Phantom)] というロケーション設定は、H.323 または SIP プロトコルを使用するクラスタ間トランク経由で CAC を正常に行うことができるロケーションを指定します。
新しいロケーションを設定するには、
メニュー オプションを使用します。ロケーションの詳細については、『 Cisco Unified Communications Manager アドミニストレーション ガイド』を参照してください。 クラスタ間トランク経由のロケーションベースの CAC の説明については、『 Cisco Unified Communications Manager システム ガイド』を参照してください。
[AARグループ(AAR Group)]
このデバイスの自動代替ルーティング(AAR)グループを選択します。 AAR グループは、帯域幅不足のためにコールがブロックされないように、コールをルーティングするためのプレフィックス番号を提供します。 AAR グループ設定を [なし(None)] にすると、ブロックされたコールの再ルーティングは行われません。
[ネットワークロケール(Network Locale)]
ドロップダウン リスト ボックスから、そのゲートウェイに関連したロケールを選択します。 そのネットワーク ロケールは、特定ロケーションのハードウェアをサポートする一連の詳細情報を識別します。 ネットワーク ロケールには、特定の地域でデバイスが使用するトーンおよび断続周期の定義が含まれています。
(注) 関連するデバイスによってサポートされているインストール済みのネットワーク ロケールだけを選択してください。 このリストにはこの設定に使用できるネットワーク ロケールがすべて示されていますが、そのすべてがインストールされているわけではありません。 ファームウェアでサポートされていないネットワーク ロケールと関連付けられると、デバイスは起動できません。
[信頼されたリレーポイントを使用(Use Trusted Relay Point)]
ドロップダウン リスト ボックスで、 Cisco Unified Communications Manager が信頼されたリレーポイント(TRP)のデバイスをこのメディア エンドポイントで挿入するかどうかについて、有効化または無効化を指定します。 次のいずれかの値を選択します。
- [デフォルト(Default)]:この値を選択すると、デバイスでは、このデバイスに関連付けられた共通デバイス設定の [信頼されたリレーポイントを使用(Use Trusted Relay Point)] の設定値が使用されます。
- [オフ(Off)]:この値を選択すると、このデバイスに対して TRP が使用不可になります。 この設定値は、このデバイスに関連付けられた共通デバイス設定の [信頼されたリレーポイントを使用(Use Trusted Relay Point)] の設定値よりも優先されます。
- [オン(On)]:この値を選択すると、このデバイスに対して TRP が使用可能になります。 この設定値は、このデバイスに関連付けられた共通デバイス設定の [信頼されたリレーポイントを使用(Use Trusted Relay Point)] の設定値よりも優先されます。
信頼されたリレー ポイント(TRP)デバイスには、Trusted Relay Point というラベルの付いた MTP またはトランスコーダ デバイスが指定されます。
エンドポイントに複数のリソース(たとえば、トランスコーダや RSVP エージェント)が必要な場合は、 Cisco Unified Communications Manager により、TRP は関連付けられたエンドポイント デバイスに最も近い位置に配置されます。
エンドポイントに TRP と MTP の両方が必要な場合、TRP は必須の MTP として使用されます。 コールの動作の詳細については、『 Cisco Unified Communications Manager システム ガイド』を参照してください。
TRP と RSVP エージェントの両方がエンドポイントに必要な場合、 Cisco Unified Communications Manager はまず、TRP としても使用可能な RSVP エージェントを検索します。
TRP とトランスコーダの両方がエンドポイントに必要な場合、 Cisco Unified Communications Manager はまず、TRP としても指定可能なトランスコーダを検索します。
ネットワーク バーチャライゼーションおよび信頼されたリレー ポイントの詳細については、『 Cisco Unified Communications Manager システム ガイド』を参照してください。
[発呼側名にUTF-8を転送(Transmit UTF-8 for Calling Party Name)]
このデバイスは、デバイスに対するデバイス プールのユーザ ロケール設定を使用して、Unicode を送信するかどうか、および受信した Unicode 情報を変換するかどうかを決定します。
送信側デバイスでは、このチェックボックスをオンにすると、デバイスに対するデバイス プールのユーザ ロケール設定が着信側電話機のユーザ ロケールと一致する場合、デバイスは Unicode を送信します。 ユーザ ロケール設定が一致しない場合、デバイスは ASCII を送信します。
着信側デバイスは、そのデバイスの送信側デバイス プールのユーザ ロケール設定に基づいて、着信 Unicode 文字を変換します。 ユーザ ロケール設定が着信側電話機のユーザ ロケールに一致した場合、電話機には文字が表示されます。
(注) トランクの両端で設定されたユーザ ロケールが同じ言語グループに属していない場合、電話機には不適切な文字が表示されることがあります。
[発呼側トランスフォーメーションCSS(Calling Party Transformation CSS)]
(FXO ポートではなく)FXS ポートに対して表示されるこの設定を使用すると、デバイスの発呼側番号をローカライズすることができます。 選択する発呼側トランスフォーメーション CSS に、このデバイスに割り当てる発呼側トランスフォーメーション パターンが含まれていることを確認してください。
ヒント デバイスは、コールが発生する前に、番号分析を使用してトランスフォーメーションを適用する必要があります。 [発呼側トランスフォーメーションCSS(Calling Party Transformation CSS)] を [なし(None)] に設定すると、トランスフォーメーションの照合と適用は行われません。 [発呼側トランスフォーメーションパターン(Calling Party Transformation Pattern)] は、必ず、ルーティングに使用されない非ヌル パーティションに設定してください。 [デバイスプールの発呼側トランスフォーメーションCSSを使用(Use Device Pool Calling Party Transformation CSS)]
デバイスに割り当てられているデバイス プールで設定された発呼側トランスフォーメーション CSS を使用するには、このチェックボックスをオンにします。 このチェックボックスをオフにした場合、デバイスでは、[ゲートウェイの設定(Gateway Configuration)] ウィンドウで設定した発呼側トランスフォーメーション CSS が使用されます。
この設定値は FXS ポートで表示され、FXO ポートでは表示されません。
[ホットラインデバイス(Hotline Device)]
このデバイスをホットライン デバイスにするには、このチェックボックスをオンにします。 ホットライン デバイスは、他のホットライン デバイスにだけ接続できます。 この機能は、オフフックになると自動的に 1 つの電話番号をダイヤルするように電話機を設定する PLAR の拡張機能です。 ホットラインでは、PLAR を使用するデバイスに適用できる制限事項が追加されます。
ホットラインを実装するには、補足サービス ソフトキーのないソフトキー テンプレートを作成して、ホットライン デバイスに適用する必要もあります。
[MLPP情報(Multilevel Precedence and Preemption (MLPP) Information)]
[MLPPドメイン(MLPP Domain)]
ドロップダウン リスト ボックスから、このデバイスに関連付けられた MLPP ドメインを選択します。 値を [<なし(None)>] のままにすると、このデバイスの MLPP ドメインは、このデバイスのデバイス プールに設定された値から継承されます。 デバイス プールに MLPP ドメインの設定がない場合、このデバイスの MLPP ドメインは、MLPP Domain Identifier エンタープライズ パラメータに設定された値から継承されます。
[MLPP通知(MLPP Indication)]
この設定は、一部のデバイスでは使用できないことに注意してください。 使用可能な場合、この設定は、優先トーンを再生できるデバイスが MLPP 優先コールの発信時にその再生機能を使用するかどうかを指定します。
ドロップダウン リスト ボックスにある次のオプションの中から、デバイスに割り当てる設定を選択します。
- [デフォルト(Default)]:このデバイスは、デバイス プールから [MLPP通知(MLPP Indication)] の設定値を引き継ぎます。
- [オフ(Off)]:このデバイスは、MLPP 優先コールの通知の制御も処理もしません。
- [オン(On)]:このデバイスは、MLPP 優先コールの通知を制御し処理します。
(注) [MLPP通知(MLPP Indication)] を [オフ(Off)] または [デフォルト(Default)](デフォルトが [オフ(Off)] の場合)に設定し、かつ [MLPPプリエンプション(MLPP Preemption)] を [強制(Forceful)] に設定するという組み合わせでデバイスを設定することはできません。
[MLPPプリエンプション(MLPP Preemption)]
この設定は、一部のデバイスでは使用できないことに注意してください。 使用可能な場合、この設定は、進行中のコールを優先できるデバイスが MLPP 優先コールの発信時にその優先機能を使用するかどうかを指定します。
ドロップダウン リスト ボックスにある次のオプションの中から、デバイスに割り当てる設定を選択します。
- [デフォルト(Default)]:このデバイスは、デバイス プールから [MLPPプリエンプション(MLPP Preemption)] の設定値を引き継ぎます。
- [無効(Disabled)]:このデバイスは、優先順位の高いコールの完了に必要な場合、優先順位の低いコールを優先するようにしません。
- [強制(Forceful)]:このデバイスは、優先順位の高いコールの完了に必要な場合、優先順位の低いコールを優先するようにします。
(注) [MLPP通知(MLPP Indication)] を [オフ(Off)] または [デフォルト(Default)](デフォルトが [オフ(Off)] の場合)に設定し、かつ [MLPPプリエンプション(MLPP Preemption)] を [強制(Forceful)] に設定するという組み合わせでデバイスを設定することはできません。
[ポート情報(Port Information)](POTS)
[ポートディレクション(Port Direction)]
このポートをコールが通過する方向を選択します。
[プレフィックスDN(Prefix DN)](FXS ポート)
このトランクが着信コールで受け取る数字に追加される、プレフィックス番号を入力します。
Cisco Unified Communications Manager は、[桁数(Num Digits)] の設定値に従って番号を切り捨てた後、プレフィックス番号を追加します。
国際的なエスケープ文字 + を入力することができます。
[桁数(Num Digits)](FXS ポート)
収集する有意な数字の桁数(0 ~ 32)を入力します。
Cisco Unified Communications Manager は、有意な数字をコールされた番号の右側(最後の桁)からカウントします。
このフィールドは、着信コールの処理に使用されます。着信番号の最後の桁から数えた桁数を指定します。この桁数が、PRI スパンに着信するコールのルーティングに使用されます。 [プレフィックスDN(Prefix DN)] を参照してください。
[必要な桁数(Expected Digits)](FXS ポート)
トランクの着信側で必要な桁数を入力します。 このフィールドはほとんど使用されないため、桁数が不明の場合は、デフォルト値 0 のままにしてください。
[不在ポート(Unattended Port)]
このデバイス上の不在ポートを示すには、このチェックボックスをオンにします。
[位置情報の設定(Geo Location Configuration)]
[位置情報(Geo Location)]
ドロップダウン リスト ボックスから、位置情報を選択します。
未指定の位置情報を選択できます。これは、このデバイスを位置情報に関連付けないことを示します。
メニュー オプションで設定された位置情報を選択することもできます。
[位置情報フィルタ(Geo Location Filter)]
ドロップダウン リスト ボックスから、位置情報フィルタを選択します。
この値を [<なし(None)>] のままにすると、このデバイスには位置情報フィルタは適用されません。
[システム(System)][位置情報フィルタ(Geolocation Filter)] メニュー オプションで設定した位置情報フィルタを選択することもできます。
(注) このフィールドは、FXS ゲートウェイに対してはサポートされません。
[プロダクト固有の設定(Product Specific Configuration)]
(ゲートウェイ メーカーによって指定される、モデル固有の設定フィールド)
[プロダクト固有の設定(Product Specific Configuration)] の下にあるモデル固有のフィールドは、ゲートウェイ メーカーによって指定されます。 これらのフィールドは動的に設定されるため、予告なく変更される場合があります。
フィールドの説明とプロダクト固有の設定項目のヘルプを表示するには、[プロダクト固有の設定(Product Specific Configuration)] 見出しの右側にある情報アイコン [?] をクリックして、ポップアップ ダイアログ ボックスでヘルプを表示します。
詳細な情報が必要な場合は、設定するゲートウェイのマニュアルを参照するか、製造元に連絡してください。
Cisco VG200 ゲートウェイ テンプレート上の Digital Access T1 トランクのフィールドの説明
次の表で、Cisco VG200 ゲートウェイ上の T1 CAS トランク用の値を追加または更新するためのフィールドについて、詳細に説明します。
一部のフィールドでは、 Cisco Unified Communications Manager の管理ページで設定された値が表示されます。
BAT ユーザ インターフェイスでは、アスタリスクが付いているフィールドには値を入力する必要があります。 アスタリスクのないフィールドでは、入力はオプションです。
表 6 Digital Access T1(T1-CAS)の設定 フィールド
説明
[エンドポイント名(End-Point Name)]
VG200 ゲートウェイの場合、ここは表示専用フィールドです。 Cisco Unified Communications Manager で生成された VG200 デジタル インターフェイスを一意に識別する文字列が表示されます。
次の例を参考にしてください。
S1/DS1-0@VG200-2
S1 はスロット 1 を表し、DS1-0 はデジタル インターフェイスを表し、@VG200-2 は VG200 テンプレート名を表します。
[説明(Description)]
デバイスの目的を明確にした説明を入力します。 説明には、任意の言語で最大 50 文字を指定できますが、二重引用符(")、パーセント記号(%)、アンパサンド(&)、バックスラッシュ(\)、山カッコ(<>)は使用できません。
[デバイスプール(Device Pool)]
ドロップダウン リスト ボックスから、適切なデバイス プールを選択します。
デバイス プールは、このデバイスのプロパティの集合(たとえば、Communications Manager グループ、日付/時刻グループ、地域、およびデバイスの自動登録用のコーリング サーチ スペース)を指定します。
[コールの分類(Call Classification)]
このパラメータは、このゲートウェイを使用している着信コールがネットワーク上にない([オフネット(OffNet)])と見なされるか、ある([オンネット(OnNet)])と見なされるかを示します。
[コールの分類(Call Classification)] フィールドが [システムデフォルトの使用(Use System Default)] に設定されている場合、 Cisco Unified Communications Manager クラスタワイド サービス パラメータ Call Classification の設定値により、ゲートウェイが [オンネット(OnNet)] か、または [オフネット(OffNet)] かが決定します。
このフィールドは、コールが [オンネット(OnNet)] または [オフネット(OffNet)] の場合、それぞれの警告トーンを提供します。
[メディアリソースグループリスト(Media Resource Group List)]
メディア リソース グループを優先順に並べたグループが表示されます。 アプリケーションは、メディア リソース リストで定義された優先順位に従って、使用可能なメディア リソースから、必要なメディア リソース、たとえば、保留音サーバを選択します。
[コーリングサーチスペース(Calling Search Space)]
ドロップダウン リスト ボックスから、適切なコーリング サーチ スペースを選択します。 コーリング サーチ スペースは、収集された(発信)番号のルート指定方法を決定するために検索されるルート パーティションの集合を指定します。
Max List Box Items エンタープライズ パラメータを使用して、このドロップダウン リスト ボックスで表示するコーリング サーチ スペースの数を設定できます。 Max List Box Items エンタープライズ パラメータで指定するより多くのコーリング サーチ スペースが存在する場合は、ドロップダウン リスト ボックスの横に省略記号のボタン(...)が表示されます。 [...] ボタンをクリックすると、[コーリングサーチスペースの選択(Select Calling Search Space)] ウィンドウが表示されます。 [名前に次を含む項目を表示(List items where Name contains)] フィールドに、コーリング サーチ スペース名の一部を入力します。 [使用する項目を選択(Select item to use)] ボックスに表示されるコーリング サーチ スペースのリストで、目的のコーリング サーチ スペース名をクリックし、[OK] をクリックします。
(注) リスト ボックスの最大項目数を設定するには、
の順に選択し、Unified CMAdmin パラメータを選択します。[AARコーリングサーチスペース(AAR Calling Search Space)]
自動代替ルーティング(AAR)の実行時にデバイスが使用するコーリング サーチ スペースを選択します。 AAR コーリング サーチ スペースは、帯域幅不足によってコールがブロックされないように、収集された(発信)番号のルーティング方法を決定するために検索されるルート パーティションの集合を指定します。
[ロケーション(Location)]
このデバイスの適切なロケーションを選択します。 ロケーションは、このロケーションとの間のコールに使用可能な帯域幅の合計を指定します。 ロケーションを [なし(None)] に設定すると、ロケーション機能がこのデバイスの消費する帯域幅を管理しないことを示します。
[AARグループ(AAR Group)]
このデバイスの自動代替ルーティング(AAR)グループを選択します。 AAR グループは、帯域幅不足のためにコールがブロックされないように、コールをルーティングするためのプレフィックス番号を提供します。 AAR グループ設定を [なし(None)] にすると、ブロックされたコールの再ルーティングは行われません。
[MLPPドメイン(MLPP Domain)]
ドロップダウン リスト ボックスから、このデバイスに関連付ける MLPP ドメインを選択します。 この値を [<なし(None)>] のままにすると、このデバイスはデバイスのデバイス プールに設定された値から MLPP ドメインを継承します。 デバイス プールに MLPP ドメインの設定がない場合、このデバイスの MLPP ドメインは、MLPP Domain Identifier エンタープライズ パラメータに設定された値から継承されます。
[DTMF優先シグナルを処理(Handle DTMF Precedence Signals)]
このゲートウェイが特殊な DTMF 信号を MLPP 優先レベルとして解釈できるようにするには、このチェックボックスをオンにします。
[ロード情報(Load Information)]
ゲートウェイに適切なファームウェア ロード情報を入力します。
このフィールドに入力された値は、このゲートウェイのデフォルト値を上書きします。
[ポート選択順序(Port Selection Order)]
チャネルまたはポートが発信コールに割り当てられる順序、つまり、最初のポート(最小番号のポート)から最後のポート(最大番号のポート)への順序か、最後のポートから最初のポートへの順序かを選択します。
有効な入力値には、[上から(TOP_DOWN)] または [下から(BOTTOM_UP)] があります。 どちらのポート順序を使用すべきかわからない場合は、[上から(TOP_DOWN)] を選択してください。
[送信番号(Digit Sending)]
ダイヤルアウト方式に、次の数字送信タイプのいずれかを選択します。
[ネットワークロケール(Network Locale)]
ドロップダウン リスト ボックスから、そのゲートウェイに関連したロケールを選択します。 そのネットワーク ロケールは、特定ロケーションのハードウェアをサポートする一連の詳細情報を識別します。 ネットワーク ロケールには、特定の地域でデバイスが使用するトーンおよび断続周期の定義が含まれています。
(注) 関連するデバイスによってサポートされているインストール済みのネットワーク ロケールだけを選択してください。 このリストにはこの設定に使用できるネットワーク ロケールがすべて示されていますが、そのすべてがインストールされているわけではありません。 ファームウェアでサポートされていないネットワーク ロケールと関連付けられると、デバイスは起動できません。
[SMDI基本ポート(SMDI Base Port)]
T1 スパンの最初の SMDI ポート番号を入力します。
このパラメータをゼロ以外の値に設定した場合、このゲートウェイが不明なタイプのルート リストまたはルート グループに属しているときは、このスパンを越えるハントは続行されません。
[位置情報の設定(Geo Location Configuration)]
[位置情報(Geo Location)]
ドロップダウン リスト ボックスから、位置情報を選択します。
未指定の位置情報を選択できます。これは、このデバイスを位置情報に関連付けないことを示します。
メニュー オプションで設定された位置情報を選択することもできます。
[位置情報フィルタ(Geo Location Filter)]
ドロップダウン リスト ボックスから、位置情報フィルタを選択します。
この値を [<なし(None)>] のままにすると、このデバイスには位置情報フィルタは適用されません。
メニュー オプションで設定した位置情報フィルタを選択することもできます。
[プロダクト固有の設定(Product Specific Configuration)]
(ゲートウェイ メーカーによって指定される、モデル固有の設定フィールド)
[プロダクト固有の設定(Product Specific Configuration)] の下にあるモデル固有のフィールドは、ゲートウェイ メーカーによって指定されます。 これらのフィールドは動的に設定されるため、予告なく変更される場合があります。
フィールドの説明とプロダクト固有の設定項目のヘルプを表示するには、[プロダクト固有の設定(Product Specific Configuration)] 見出しの右側にある情報アイコン [?] をクリックして、ポップアップ ダイアログ ボックスでヘルプを表示します。
詳細な情報が必要な場合は、設定するゲートウェイのマニュアルを参照するか、製造元に連絡してください。
Cisco VG200 ゲートウェイ テンプレート上の T1 PRI または E1 PRI トランクのフィールドの説明
次の表で、Cisco VG200 ゲートウェイ上の T1 PRI トランクまたは E1 PRI トランクの値を追加または更新するためのフィールドについて説明します。
一部のフィールドでは、 Cisco Unified Communications Manager の管理ページで設定された値が表示されます。
BAT ユーザ インターフェイスでは、アスタリスクが付いているフィールドには値を入力する必要があります。 アスタリスクのないフィールドでは、入力はオプションです。
表 7 T1 PRI トランクまたは E1 PRI トランクのフィールドの説明 フィールド
説明
[デバイス情報(Device Information)]
[エンドポイント名(End-Point Name)]
VG200 ゲートウェイの場合、ここは表示専用フィールドです。 Cisco Unified Communications Manager が生成する、VG200 エンドポイントを一意に識別する文字列が表示されます。
次の例を参考にしてください。
S1/DS1-0@VG200-2
S1 はスロット 1を表し、DS1-0 はデジタル インターフェイスを表し、@VG200-2 は VG200 ドメイン名を表します。
[説明(Description)]
設定するエンドポイントの説明を入力します。 説明には、任意の言語で最大 50 文字を指定できますが、二重引用符(")、パーセント記号(%)、アンパサンド(&)、バックスラッシュ(\)、山カッコ(<>)は使用できません。
[デバイスプール(Device Pool)]
このグループのゲートウェイまたはポート用のデバイス プールを選択します。
デバイス プールは、デバイスに共通した特性のセット(たとえば、地域、日付/時刻グループ、 Cisco Unified Communications Manager グループ、自動登録用のコーリング サーチ スペースなど)を定義します。
[コールの分類(Call Classification)]
ドロップダウン リスト ボックスで、[オンネット(on net)]、[オフネット(off net)]、または [システムデフォルト(system default)] の中からデバイスの設定オプションを選択します。
デバイス レベルで [システムデフォルトの使用(Use System Default)] を選択した場合は、サービス パラメータの値を使用してデバイスが内部(オンネット)か外部(オフネット)かが決定されます。
[ネットワークロケール(Network Locale)]
このゲートウェイに関連付けるネットワーク ロケールを選択します。
ネットワーク ロケールは、シスコのゲートウェイと電話機が、特定地域の PSTN およびその他のネットワークと通信するときに使用するトーンと断続周期を提供します。
[メディアリソースグループリスト(Media Resource Group List)]
このグループのゲートウェイまたはポート用のメディア リソース グループ リスト(MRGL)を選択します。
MRGL は、優先順位が付けられたメディア リソース グループのリストを指定します。 アプリケーションは、MRGL で指定された優先順位に従って、使用可能なメディア リソースの中から、必要なメディア リソースを選択できます。
[ロケーション(Location)]
このグループのゲートウェイまたはポート用のロケーションを選択します。
ロケーションは、帯域幅制限付き接続を使用してアクセスされるリモート ロケーションを指します。
[AARグループ(AAR Group)]
このデバイスの自動代替ルーティング(AAR)グループを選択します。 AAR グループは、帯域幅不足のためにコールがブロックされないように、コールをルーティングするためのプレフィックス番号を提供します。 AAR グループ設定を [なし(None)] にすると、ブロックされたコールの再ルーティングは行われません。
[ロード情報(Load Information)]
ゲートウェイ用のカスタム ソフトウェアに該当するロード情報を入力します。 このフィールドに入力された値は、このゲートウェイのデフォルト値を上書きします。
デフォルト ロードを使用する場合は、このフィールドをブランクのままにします。
[発呼側名にUTF-8を転送(Transmit UTF-8 for Calling Party Name)]
このデバイスは、デバイスのデバイス プールのロケール設定を使用して、Unicode を送信するかどうか、および受信した Unicode 情報を変換するかどうかを決定します。
送信デバイスでは、このチェックボックスをオンにした場合に、デバイスのデバイス プールのユーザ ロケール設定が着信側電話機のユーザ ロケール設定に一致すると、デバイスは Unicode を送信します。 ユーザ ロケール設定が一致しない場合、デバイスは ASCII を送信します。
受信デバイスは、送信デバイスのデバイス プールのユーザ ロケール設定に基づいて、着信する Unicode 文字を変換します。 ユーザ ロケール設定が着信側電話機のユーザ ロケールに一致した場合、電話機には文字が表示されます。
トランクの両端で設定されたユーザ ロケールが同じ言語グループに属していない場合、電話機には不適切な文字が表示されることがあります。
[MLPP情報(Multilevel Precedence and Preemption (MLPP) Information)]
[MLPPドメイン(MLPP Domain)]("0000FF" など)
このデバイスに関連付けられている MLPP ドメインの 16 進数値を入力します。 ブランクまたは 0 ~ FFFFFF の値である必要があります。
[インターフェイス情報(Interface Information)]
[PRI プロトコルタイプ(PRI Protocol Type)]
スパンの通信プロトコルを選択します。
E1 PRI スパンには、次のオプションがあります。
T1 PRI スパンには、通信事業者または交換機に応じて、複数のオプションがあります。
- [PRI 4ESS]:AT&T 長距離通信事業者、Lucent Definity 交換機
- [PRI 5E8 Custom]:Cisco Unified IP Phone、Nortel Meridian 交換機、Lucent Definity 交換機
- [PRI 5E8 Teleos]:Madge Teleos ボックス
- [PRI 5E8 Intecom]:Intecom PBX
- [PRI5E9]:AT&T 系の地域通信事業者または交換機
- [PRI NI2]:Sprint 地域通信事業者または交換機
- [PRI DMS-100]:Sprint 地域通信事業者または交換機
- [PRI DMS-250]:MCI および Sprint 地域通信事業者または交換機
- [PRI ETSI SC]:T1 ベースの欧州地域通信事業者、および日本の地域電話局
- [PRI ISO QSIG T1]:PBX 間シグナリング プロトコル
[プロトコル側(Protocol Side)]
適切なプロトコル側を選択します。 この設定値は、ゲートウェイが Central Office/Network デバイスに接続されるか、User デバイスに接続されるかを指定します。
PRI 接続の両側で、反対の設定値を使用していることを確認してください。 たとえば、PBX に接続されているときに、その PBX が [プロトコル側(Protocol Side)] として [ユーザ(User)] を使用する場合は、このデバイスには [ネットワーク(Network)] を選択してください。 一般に、Central Office(CO)接続には User を使用します。
[チャネル選択順序(Channel Selection Order)]
チャネルまたはポートが使用可能になる順序、つまり、最初のポート(最小番号のポート)から最後のポート(最大番号のポート)への順序か、最後のポートから最初のポートへの順序かを選択します。
有効な入力値は、[上から(TOP_DOWN)] または [下から(BOTTOM_UP)] です。 どちらのポート順序を使用すべきかわからない場合は、[上から(TOP_DOWN)] を選択してください。 デフォルトは [下から(BOTTOM_UP)] です。
[チャネルIE タイプ(Channel IE Type)]
次の値のいずれかを選択して、チャネル選択がチャネル マップとして提示されるか、スロット マップとして提示されるかを指定します。
[PCMタイプ(PCM Type)]
デジタル エンコーディング形式を指定します。 次のいずれかの形式を選択します。
[最初のリスタートの遅延(Delay for first restart)]
(オプション)スパンが開始するレートを、1/8 秒単位で入力します。 システム上で複数の PRI スパンが使用可能であるときに、[PRI初期化でリスタートを制限(Inhibit restarts at PRI initialization)] チェックボックスがオンになっていない場合、この遅延が発生します (デフォルト値は 32)。
たとえば、最初の 5 個のカードを 0 に設定し、次の 5 個のカードを 16 に設定します (カードをイン サービスにするには、2 秒待ってください)。
[リスタート間遅延(Delay between restarts)]
再起動間の間隔を、1/8 秒単位で入力します。 遅延が起きるのは、[PRI初期化でリスタートを制限(Inhibit restarts at PRI initialization)] チェックボックスがオフになっている場合に、PRI RESTART が送信されるときです (デフォルト値は 4)。
[PRI初期化でリスタートを制限(Inhibit restarts at PRI initialization)]
再起動メッセージによって、PRI スパン上のポートの状況を確認します。 RESTART が送信されない場合、 Cisco Unified Communications Manager は、ポートが使用中であると想定します。 デフォルトでは、このチェックボックスはオンになっています。
D チャネルは、別の PRI トランクの D チャネルと正常に接続されると、このチェックボックスがオフの場合は、Restart を送信します。
[ステータスポーリングを有効化(Enable status poll)]
このチェックボックスをオンにすると、 Cisco Unified Communications Manager の拡張サービス パラメータ(Change B-Channel Maintenance Status)を使用可能にできます。 このサービス パラメータによって B チャネルがアクティブのときに個別の B チャネルをサービスから除外できます。
Change B-Channel Maintenance Status サービス パラメータを無効にするには、このチェックボックスをオフにします。
デフォルトでは、このフィールドはオフです。
[不在ポート(Unattended Port)]
このデバイス上の不在ポートを示すには、このチェックボックスをオンにします。
[コールルーティング情報 - インバウンドコール(Call Routing Information - Inbound Calls)]
[有意な数字(Significant Digits)]
このフィールドは、PRI スパンが着信コールで保持しなければならない末尾の桁数を表します。 有意な数字が有効になっているトランクは、着信コールで提供されるアドレスの最後の数桁以外をすべて切り捨てます。
有意な数字を収集するかどうかに応じて、このチェックボックスをオンまたはオフにします。
[コーリングサーチスペース(Calling Search Space)]
このグループの電話機またはポートのコーリング サーチ スペースを選択します。
コーリング サーチ スペースは、ルート パーティションの集合を指定するものです。ルート パーティションの集合は、ダイヤルされた番号のルーティング方法を決定するために検索されます。
[AARコーリングサーチスペース(AAR Calling Search Space)]
自動代替ルーティング(AAR)の実行時にデバイスが使用するコーリング サーチ スペースを選択します。 AAR コーリング サーチ スペースは、帯域幅不足によってコールがブロックされないように、収集された(発信)番号のルーティング方法を決定するために検索されるルート パーティションの集合を指定します。
[プレフィックスDN(Prefix DN)]
(オプション)着信コールでこのトランクが受信する数字に付加されるプレフィックス番号を入力します。
Cisco Unified Communications Manager は、[桁数(Num Digits)] の設定値に従って番号を切り捨てた後、プレフィックス番号を追加します。
[コールルーティング情報 - アウトバウンドコール(Call Routing Information - Outbound Calls)]
[発呼者回線IDの表示(Calling Line ID Presentation)]
Cisco Unified Communications Manager が発信者電話番号を送信するか、ブロックするかを選択します。
発呼者回線 ID の表示を変更しない場合は、[デフォルト(Default)] を選択します。 Cisco Unified Communications Manager が「許可された発呼者回線 ID」を送信するようにする場合は、[許可(Allowed)] を選択します。 Cisco Unified Communications Manager が「非許可の発呼者回線 ID」を送信するようにする場合は、[非許可(Restricted)] を選択します。
[発呼者の選択(Calling Party Selection)]
ゲートウェイ上のすべての発信コールは、電話番号情報を送信できます。 送信される電話番号を選択します。
[発呼側IE番号タイプが不明(Calling Party IE Number Type Unknown)]
発呼側電話番号の番号タイプの形式を選択します。
Cisco Unified Communications Manager は、発呼側電話番号(DN)のタイプを設定します。 NANP やヨーロッパ ダイヤル計画などのダイヤル計画に十分な経験がある場合を除いて、デフォルト値を変更しないようにお勧めします。 Cisco Unified Communications Manager はヨーロッパ国別のダイヤル パターンを認識しないため、ヨーロッパ圏ではデフォルトの変更が必要になる場合があります。 また、非国別タイプ番号としてルーティングを実行する PBX に接続する場合も、この設定値を変更できます。
次のいずれかのオプションを選択します。
[着信側IE番号タイプが不明(Called Party IE Number Type Unknown)]
着信側電話番号の番号タイプの形式を選択します。 Cisco Unified Communications Manager は、着信側電話番号(DN)のタイプを設定します。 NANP やヨーロッパ ダイヤル計画などのダイヤル計画に十分な経験がある場合を除いて、デフォルト値を変更しないようにお勧めします。 Cisco Unified Communications Manager はヨーロッパ国別のダイヤル パターンを認識しないため、ヨーロッパ圏ではデフォルトの変更が必要になる場合があります。 また、非国別タイプ番号としてルーティングを実行する PBX に接続する場合も、この設定値を変更できます。
次のいずれかのオプションを選択します。
[着信番号計画(Called Numbering Plan)]
着信側電話番号の番号計画の形式を選択します。
Cisco Unified Communications Manager は、着信側 DN の番号計画を設定します。 NANP やヨーロッパ ダイヤル計画などのダイヤル計画に十分な経験がある場合を除いて、デフォルト値を変更しないようにお勧めします。 Cisco Unified Communications Manager はヨーロッパ国別のダイヤル パターンを認識しないため、ヨーロッパ圏ではデフォルトの変更が必要になる場合があります。 また、非国別タイプ番号としてルーティングを実行する PBX に接続する場合も、この設定値を変更できます。
次のいずれかのオプションを選択します。
[発呼番号計画(Calling Numbering Plan)]
発呼側電話番号の番号計画の形式を選択します。
Cisco Unified Communications Manager は、発呼側 DN の番号計画を設定します。 NANP やヨーロッパ ダイヤル計画などのダイヤル計画に十分な経験がある場合を除いて、デフォルト値を変更しないようにお勧めします。 Cisco Unified Communications Manager はヨーロッパ国別のダイヤル パターンを認識しないため、ヨーロッパ圏ではデフォルトの変更が必要になる場合があります。 また、非国別タイプ番号としてルーティングを実行する PBX に接続する場合も、この設定値を変更できます。
次のいずれかのオプションを選択します。
[削除桁数(Number of digits to strip)]
発信コールに関して除去する桁数を、0 ~ 32 で選択します (デフォルト値は 0)。
たとえば、8889725551234 にダイヤルし、除去する桁数が 3 であるとします。 この例では Cisco Unified Communications Manager は発信番号から 888 を除去します。
[発信者ID DN(Caller ID DN)]
発信者 ID に使用するパターンを 0 ~ 24 桁で入力します。
たとえば、北米では次のとおりです。
[PRI プロトコルタイプ固有情報(PRI Protocol Type Specific Information)]
[IE配信を表示(Display IE Delivery)]
(オプション)発呼側と着信側の名前通知サービスに対して、SETUP メッセージおよび CONNECT メッセージ内の表示情報要素(IE)の通知を可能にするには、このチェックボックスをオンにします。 デフォルトでは、このチェックボックスはオフになっています。
[番号IE配信のリダイレクト - アウトバウンド(Redirecting Number IE Delivery - Outbound)]
(オプション)コールの自動転送時に最初にリダイレクトした端末番号とコールのリダイレクトの理由を知らせるために、SETUP メッセージに番号 IE のリダイレクトを含めるには、このチェックボックスをオンにします。 デフォルトでは、このチェックボックスはオフになっています。
この設定値は、Digital Access ゲートウェイ用のすべてのプロトコル上で、SETUP メッセージだけに適用されます。
[番号IE配信のリダイレクト - インバウンド(Redirecting Number IE Delivery - Inbound)]
(オプション)コールの自動転送時に最初にリダイレクトした端末番号とコールのリダイレクトの理由を知らせるために、SETUP メッセージに番号 IE のリダイレクトを含めるには、このチェックボックスをオンにします。 デフォルトでは、このチェックボックスはオフになっています。
この設定値は、Digital Access ゲートウェイ用のすべてのプロトコル上で、SETUP メッセージだけに適用されます。
[IE 表示での付加先行文字を送る(Send Extra Leading Character in Display IE)]
Display IE フィールドに特殊先行文字バイト(ASCII 以外の表示不能なバイト)を含める場合は、このチェックボックスをオンにします。
DisplayIE フィールドからこの文字バイトを除外するには、このチェックボックスをオフにします。
このチェックボックスが適用されるのは、DMS-100 プロトコルと DMS-250 プロトコルに限られます。
デフォルトでは、この設定値は使用不可(チェックボックスはオフ)になっています。
[非ISDNプログレスインジケータIEを有効に設定(Setup non-ISDN Progress Indicator IE Enable)]
(オプション)一部の PBX 上でリングバックを強制するには、このフィールドに値を指定する必要があります。
デフォルトでは、このチェックボックスはオフになっています。 ユーザが発信コールでリングバック音を受信しない場合だけ、このチェックボックスをオンにしてください。
この設定値が使用可能である場合、 Cisco Unified Communications Manager は、Q.931 セットアップ メッセージを、プログレス インジケータ フィールドが non-ISDN に設定されているデジタル(つまり、非 H.323)ゲートウェイに送信します。
このメッセージは、 Cisco Unified Communications Manager ゲートウェイが non-ISDN であること、および宛先デバイスが帯域内呼び出し音を再生しなければならないことを、宛先デバイスに知らせます。
この問題は、通常、デジタル ゲートウェイを使用して PBX に接続される Cisco Unified Communications Manager に関連しています。
[MCDN チャネル番号拡張ビットを0に設定(MCDN Channel Number Extension Bit Set to Zero)]
このフィールドは、DMS-100 プロトコルだけに適用されます。 インターフェイス識別子が存在することを指定するには、このチェックボックスをオンにします。 デフォルトでは、このチェックボックスはオフになっています。
[ファシリティIEでのコール名を送る(Send Calling Name In Facility IE)]
このフィールドは、DMS-100 プロトコルだけに適用されます。 PBX プロバイダーから得られる値を入力します。 有効な値は 0~ 255 です。
[インターフェイス識別子あり(Interface Identifier Present)]
このフィールドは、DMS-100 プロトコルだけに適用されます。 インターフェイス識別子が存在することを指定するには、このチェックボックスをオンにします。 デフォルトでは、このチェックボックスはオフになっています。
[インターフェイス識別子の値(Interface Identifier Value)]
このフィールドは、DMS-100 プロトコルだけに適用されます。 PBX プロバイダーから得られる値を入力します。 有効な値は 0~ 255 です。
[接続側回線IDの表示(Connected Line ID Presentation)]
Cisco Unified Communications Manager が着信側電話番号の表示を許可するか、ブロックするかを選択します。
接続側回線 ID の表示を変更しない場合は、[デフォルト(Default)] を選択します。 Cisco Unified Communications Manager が「許可された接続側回線 ID」を送信するようにする場合は、[許可(Allowed)] を選択します。 Cisco Unified Communications Manager が「非許可の接続側回線 ID」を送信するようにする場合は、[非許可(Restricted)] を選択します。
[UUIE の設定(UUIE Configuration)]
[UUIE を介した優先レベルの通知(Passing Precedence Level Through UUIE)]
MLPP 情報が PRI 4ESS UUIE フィールドを通過できるようにするには、このチェックボックスをオンにします。 このボックスは、DRSN スイッチの操作に使用されます。
このチェックボックスは、このゲートウェイで PRI プロトコルタイプの値に PRI 4ESS が指定されている場合にだけ使用可能になります。
デフォルト値は、オフです。
[セキュリティアクセスレベル(Security Access Level)]
セキュリティ アクセス レベルの値を入力します。 有効値は 00 ~ 99 です。 [UUIE を介した優先レベルの通知(Passing Precedence Level Through UUIE)] チェックボックスがオンの場合に限り、このフィールドを使用できます。 デフォルト値は 2 です。
[位置情報の設定(Geo Location Configuration)]
[位置情報(Geo Location)]
ドロップダウン リスト ボックスから、位置情報を選択します。
未指定の位置情報を選択できます。これは、このデバイスを位置情報に関連付けないことを示します。
メニュー オプションで設定された位置情報を選択することもできます。
[位置情報フィルタ(Geo Location Filter)]
ドロップダウン リスト ボックスから、位置情報フィルタを選択します。
この値を [<なし(None)>] のままにすると、このデバイスには位置情報フィルタは適用されません。
メニュー オプションで設定した位置情報フィルタを選択することもできます。
[プロダクト固有の設定(Product Specific Configuration)]
[プロダクト固有の設定(Product Specific Configuration)] の下にあるモデル固有のフィールドは、ゲートウェイ メーカーによって指定されます。 フィールドの説明とプロダクト固有の設定項目のヘルプを表示するには、[プロダクト固有の設定(Product Specific Configuration)] 見出しの右側にある情報アイコン [?] をクリックして、ポップアップ ウィンドウでヘルプを表示します。 詳細な情報が必要な場合は、設定するゲートウェイの資料を参照してください。
ポートの設定
POTS ポートの設定
表 8 POTS ポートの設定 フィールド
説明
[ポートタイプ(Port Type)]
[ポートタイプ(Port Type)] ドロップダウン リスト ボックスで、[POTS] を選択します。
[開始ポート番号(Beginning Port Number)]
[終了ポート番号(Ending Port Number)]
[開始ポート番号(Beginning Port Number)] フィールドと [終了ポート番号(Ending Port Number)] フィールドに値を設定して、追加および設定するポートが、使用可能なすべてのポートであるか、1 つのポートであるか、ある範囲のポートであるかを選択します。
- ポートの範囲を指定するには、[開始ポート番号(Beginning Port Number)] と [終了ポート番号(Ending Port Number)] に適切な値を選択します。
- 1 つのポートを作成するには、[開始ポート番号(Beginning Port Number)] フィールドと [終了ポート番号(Ending Port Number)] フィールドに同じ番号を選択します。
- 使用可能なすべてのポートを追加するには、[開始ポート番号(Beginning Port Number)] フィールドと [終了ポート番号(Ending Port Number)] フィールドの両方に [すべてのポート(All Ports)] を選択します。
[ポートディレクション(Port Direction)]
このポートをコールが通過する方向を選択します。
[IPネットワークへのオーディオ信号調整(Audio Signal Adjustment into IP Network)]
ポート アプリケーション タイプに関連した受信オーディオ信号に適用されるゲインまたはロスを指定します。
(注) ゲインの設定が不適切だと、エコーが聞こえる場合があります。 この設定を調整する場合は注意してください。
[IPネットワークからのオーディオ信号調整(Audio Signal Adjustment from IP Network)]
ポート アプリケーション タイプに関連した送信オーディオ信号に適用されるゲインまたはロスを指定します。
(注) ゲインの設定が不適切だと、エコーが聞こえる場合があります。 この設定を調整する場合は注意してください。
[プレフィックスDN(Prefix DN)]
このトランクが着信コールで受け取る数字に追加される、プレフィックス番号を入力します。
Cisco Unified Communications Manager は、[桁数(Num Digits)] の設定値に従って番号を切り捨てた後、プレフィックス番号を追加します。
[桁数(Num Digits)]
収集する有意な数字の桁数(0 ~ 32)を入力します。
Cisco Unified Communications Manager は、有意な数字をコールされた番号の右側(最後の桁)からカウントします。
このフィールドは、着信コールの処理に使用されます。着信番号の最後の桁から数えた桁数を指定します。この桁数が、PRI スパンに着信するコールのルーティングに使用されます。 [プレフィックスDN(Prefix DN)] を参照してください。
[必要な桁数(Expected Digits)]
トランクの着信側で必要な桁数を入力します。 このフィールドはほとんど使用されないため、桁数が不明の場合は、デフォルト値 0 のままにしてください。
[コール再開タイマー(1000~5000 ms)(Call Restart Timer (1000-5000 ms))]
コール再開タイマー(1000~5000 ms)。ms は、ミリ秒単位の時間を示します。
[オフフック確認タイマー(100~1000 ms)(Offhook Validation Timer (100-1000 ms))]
オフフック確認タイマー(100~1000 ms)。ms は、ミリ秒単位の時間を示します。
[オンフック確認タイマー(100~1000 ms)(Onhook Validation Timer (100-1000ms))]
オンフック確認タイマー(100~1000 ms)。ms は、ミリ秒単位の時間を示します。
[フックフラッシュタイマー(100~1500 ms)(Hookflash Timer (100 - 1500 ms))]
フックフラッシュタイマー(100~1500 ms)。ms は、ミリ秒単位の時間を示します。
[プロダクト固有の設定(Product Specific Configuration)]
(ゲートウェイ メーカーによって指定される、モデル固有の設定フィールド)
[プロダクト固有の設定(Product Specific Configuration)] の下にあるモデル固有のフィールドは、ゲートウェイ メーカーによって指定されます。 これらのフィールドは動的に設定されるため、予告なく変更される場合があります。
フィールドの説明とプロダクト固有の設定項目のヘルプを表示するには、[プロダクト固有の設定(Product Specific Configuration)] 見出しの右側にある情報アイコン [?] をクリックして、ポップアップ ダイアログ ボックスでヘルプを表示します。
詳細な情報が必要な場合は、設定するゲートウェイのマニュアルを参照するか、製造元に連絡してください。
Digital Access T1 用の E & M ポートのフィールドの説明
Cisco VG200 ゲートウェイ上の T1 CAS トランク用 E&M ポートの値を追加または更新する際には、次のフィールドの説明を参照してください。
一部のフィールドでは、 Cisco Unified Communications Manager の管理ページで設定された値が表示されます。
BAT ユーザ インターフェイスでは、アスタリスクが付いているフィールドには値を入力する必要があります。 アスタリスクのないフィールドでは、入力はオプションです。
表 9 E & M ポートの設定 フィールド
説明
[ポートタイプ(Port Type)]
[ポートタイプ(Port Type)] ドロップダウン リスト ボックスから、[EANDM] を選択します。
[開始ポート番号(Beginning Port Number)]
[終了ポート番号(Ending Port Number)]
[開始ポート番号(Beginning Port Number)] フィールドと [終了ポート番号(Ending Port Number)] フィールドに値を設定して、追加および設定するポートが、使用可能なすべてのポートであるか、1 つのポートであるか、ある範囲のポートであるかを選択します。
- ポートの範囲を指定するには、[開始ポート番号(Beginning Port Number)] と [終了ポート番号(Ending Port Number)] に適切な値を選択します。
- 1 つのポートを作成するには、[開始ポート番号(Beginning Port Number)] フィールドと [終了ポート番号(Ending Port Number)] フィールドに同じ番号を選択します。
- 使用可能なすべてのポートを追加するには、[開始ポート番号(Beginning Port Number)] フィールドと [終了ポート番号(Ending Port Number)] フィールドの両方に [すべてのポート(All Ports)] を選択します。
[ポートの詳細(Port Details)]
[ポートディレクション(Port Direction)]
このポートをコールが通過する方向を選択します。
[発呼者の選択(Calling Party Selection)]
ゲートウェイ上のすべての発信コールは、電話番号情報を送信できます。 送信される電話番号を選択します。
- [発信元(Originator)]:発信側デバイスの電話番号を送信します。
- [最初のリダイレクト番号(First Redirect Number)]:リダイレクト側デバイスの電話番号を送信します。
- [最後のリダイレクト番号(Last Redirect Number)]:最後にコールをリダイレクトするデバイスの電話番号を送信します。
- [最初のリダイレクト番号(外部)(First Redirect Number (External))]:外部電話マスクが適用されている、最初のリダイレクト側デバイスの電話番号を送信します。
- [最後のリダイレクト番号(外部)(Last Redirect Number (External))]:外部電話マスクが適用されている、最後のリダイレクト側デバイスの電話番号を送信します。
[発信者IDタイプ(Caller ID Type)]
発信者 ID のタイプとして次のどちらかを選択します。
[発信者ID DN(Caller ID DN)]
発呼者回線 ID に使用するパターン(0 ~ 24 桁)を入力します。
たとえば、北米では次のとおりです。
[プレフィックスDN(Prefix DN)]
着信コールの着信側番号に追加されるプレフィックス番号を入力します。
Cisco Unified Communications Manager は、[桁数(Num Digits)] の設定値に従って番号を切り捨てた後、プレフィックス番号を追加します。
[桁数(Num Digits)]
収集する有意な数字の桁数(0 ~ 32)を選択します。 Cisco Unified Communications Manager は、有意な数字をコールされた番号の右側(最後の桁)からカウントします。
このフィールドは、[有意な数字(Significant Digits)] チェックボックスがオンである場合に使用します。 このフィールドは、着信コールの処理に使用されます。着信番号の最後の桁から数えた桁数を指定します。この桁数が、PRI スパンに着信するコールのルーティングに使用されます。 [プレフィックスDN(Prefix DN)] および [有意な数字(Significant Digits)] を参照してください。
[必要な桁数(Expected Digits)]
トランクの着信側で必要な桁数を入力します。 このフィールドはほとんど使用されないため、桁数が不明の場合は、デフォルト値 0 のままにしてください。
[不在ポート(Unattended Port)]
このデバイス上の不在ポートを示すには、このチェックボックスをオンにします。
[プロダクト固有の設定(Product Specific Configuration)]
(ゲートウェイ メーカーによって指定される、モデル固有の設定フィールド)
[プロダクト固有の設定(Product Specific Configuration)] の下にあるモデル固有のフィールドは、ゲートウェイ メーカーによって指定されます。 これらのフィールドは動的に設定されるため、予告なく変更される場合があります。
フィールドの説明とプロダクト固有の設定項目のヘルプを表示するには、[プロダクト固有の設定(Product Specific Configuration)] 見出しの右側にある情報アイコン [?] をクリックして、ポップアップ ダイアログ ボックスでヘルプを表示します。
詳細な情報が必要な場合は、設定するゲートウェイのマニュアルを参照するか、製造元に連絡してください。