この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
目次
この章では、デバイス プールの変更または追加、あるいは類似した一連の電話機のコーリング サーチ スペースなど、電話機の設定値を [電話の更新(Update Phones)] オプションを使用して更新する方法について説明します。 更新する既存の電話機レコードは、クエリーまたはカスタム ファイルを使用して検索できます。 電話機レコードを検出したら、更新パラメータを定義できます。
ステップ 1 |
の順に選択します。 [電話の更新のクエリー(Update Phones Query)] ウィンドウが表示されます。
|
||
ステップ 2 |
最初の [検索対象:電話、検索条件:(Find Phone where)] ドロップダウン リスト ボックスで、次のいずれかの検索条件を選択します。
2 番目の [検索対象:電話、検索条件:(Find Phone where)] ドロップダウン リスト ボックスで、次のいずれかの検索条件を選択します。 |
||
ステップ 3 |
必要に応じて、適切な検索テキストを指定します。
|
||
ステップ 4 | クエリーをさらに定義する場合や、複数のフィルタを追加する場合は、[絞り込み(Search Within Results)] チェックボックスをオンにし、ドロップダウン ボックスから [AND] または [OR] を選択して、ステップ 2 ~ステップ 3 を繰り返します。 | ||
ステップ 5 | [検索(Find)] をクリックします。 検索された電話機のリストが表示されます。 [電話の更新(Update Phones)] ウィンドウに、選択した電話機の詳細が表示されます。 |
電話機を更新する手順を完了するには、更新パラメータの選択に進みます。
カスタム ファイルを作成して、更新する電話機を検索します。 この手順で電話機を検索した後に、更新パラメータを選択する必要があります。
(注) |
更新トランザクション用に bat.xlt を使用して作成したトランザクション ファイルを挿入またはエクスポートしないでください。 代わりに、更新が必要な電話機レコードの詳細情報が設定されたカスタム ファイルを作成する必要があります。 更新トランザクションには、このファイルしか使用しないでください。 |
(注) |
デバイス名、説明、または電話番号の値をカスタム更新ファイルに入力します。 カスタム更新ファイルにヘッダーを含める必要はありません。 |
電話機を更新する手順を完了するには、更新パラメータの選択に進みます。
ステップ 1 | [電話の更新のクエリー(Update Phones Query)] ウィンドウで、[次へ(Next)] をクリックします。 選択したクエリーのタイプが、[電話の更新(Update Phones)] に表示されます。 クエリーのタイプを変更する場合は、[戻る(Back)] をクリックします。 | ||
ステップ 2 | 更新する前にユーザをログアウトするには、[更新前にユーザをログアウト(Logout Users Before Update)] チェックボックスをオンにします。 フィールドを 1 つも選択しない場合、このオプションを使用してユーザを一括してログ アウトすることもできます。 | ||
ステップ 3 | クエリーまたはカスタム ファイルで定義したレコードすべてに対して、更新する設定値を指定します。 更新するパラメータは複数選択できます。 パラメータの説明については、表 1を参照してください。 | ||
ステップ 4 |
更新するフィールドの左側にある [更新(update)] チェックボックスをオンにします。 この操作により、フィールドの既存の値を上書きするように BAT に指示します。
|
||
ステップ 5 | チェックマークが付いたパラメータの [値(Value)] フィールドに新しい値を入力するか、リスト ボックスから値を選択します。 | ||
ステップ 6 | [電話のリセット/リスタート(Reset/Restart Phones)] 領域で、次の選択項目のいずれかを選択します。 | ||
ステップ 7 | 必要な電話機パラメータを更新します。 フィールドの説明については、表 1を参照してください。 | ||
ステップ 8 | レコードを更新するジョブを作成するには、[送信(Submit)] をクリックします。 [一括管理(Bulk Administration)] メイン メニューの [ジョブスケジューラ(Job Scheduler)] オプションを使用して、このジョブのスケジュールやアクティブ化を行います。 |
次の表で、電話機を更新する場合に表示されるフィールドすべてについて説明します。 一部のデバイス タイプには、すべての電話機設定値を必要としないものもあります。
一部のフィールドに示される値は、 Cisco Unified Communications Manager から表示されます。 これらの値は、 Cisco Unified Communications Manager の管理ページを使用して設定する必要があります。
(注) |
一部のフィールドには 2 つのチェックボックスがあることに注意してください。 最初のチェックボックスによって、フィールドを更新する必要があるかどうかが決定されます。2 番目のチェックボックスによって、フィールドに使用される値(オンまたはオフ)が決定されます。 |
ヒント |
フィールドを更新する必要がある場合は、最初のチェックボックスをオンにします。2 番目のチェックボックスをチェックしてオンまたはオフにすると、その値が選択した電話機に適用されます。 たとえば、[サイレント(Do Not Disturb)] の最初のチェックボックスをオンにして、2 番目のチェックボックスをオフのままにした場合、電話機は [サイレントDo Not Disturb] がオフの状態で更新されます。 |
この章では、デバイス プールの変更または追加、あるいは類似した一連の電話機のコーリング サーチ スペースなど、電話機の設定値を [電話の更新(Update Phones)] オプションを使用して更新する方法について説明します。 更新する既存の電話機レコードは、クエリーまたはカスタム ファイルを使用して検索できます。 電話機レコードを検出したら、更新パラメータを定義できます。
クエリーを使用した電話機の更新
手順
ステップ 1 の順に選択します。 [電話の更新のクエリー(Update Phones Query)] ウィンドウが表示されます。
(注) すべての電話機を更新するには、[検索(Find)] をクリックし、クエリーは指定しません。 この手順の残りをスキップし、電話機の更新パラメータの選択に進みます。
ステップ 2 最初の [検索対象:電話、検索条件:(Find Phone where)] ドロップダウン リスト ボックスで、次のいずれかの検索条件を選択します。
- [デバイス名(Device Name)]
- [説明(Description)]
- [電話番号(Directory Number)]
- [コーリングサーチスペース(Calling Search Space)]
- [デバイスプール(Device Pool)]
- [デバイスタイプ(Device Type)]
- [コールピックアップグループ(Call Pickup Group)]
- [LSCステータス(LSC Status)]
- [認証文字列(Authentication String)]
- [ロケーション(Location)]
- [電話ロード名(Phone Load Name)]
- [デバイスプロトコル(Device Protocol)]
- [セキュリティプロファイル(Security Profile)]
2 番目の [検索対象:電話、検索条件:(Find Phone where)] ドロップダウン リスト ボックスで、次のいずれかの検索条件を選択します。
ステップ 3 必要に応じて、適切な検索テキストを指定します。
ヒント データベースに登録されているすべての電話機を検索するには、検索テキストを入力せずに [検索(Find)] をクリックします。
ステップ 4 クエリーをさらに定義する場合や、複数のフィルタを追加する場合は、[絞り込み(Search Within Results)] チェックボックスをオンにし、ドロップダウン ボックスから [AND] または [OR] を選択して、ステップ 2 ~ステップ 3 を繰り返します。 ステップ 5 [検索(Find)] をクリックします。 検索された電話機のリストが表示されます。 [電話の更新(Update Phones)] ウィンドウに、選択した電話機の詳細が表示されます。
次の作業
電話機を更新する手順を完了するには、更新パラメータの選択に進みます。
カスタム ファイルを使用した電話機の更新
カスタム ファイルを作成して、更新する電話機を検索します。 この手順で電話機を検索した後に、更新パラメータを選択する必要があります。
(注)
更新トランザクション用に bat.xlt を使用して作成したトランザクション ファイルを挿入またはエクスポートしないでください。 代わりに、更新が必要な電話機レコードの詳細情報が設定されたカスタム ファイルを作成する必要があります。 更新トランザクションには、このファイルしか使用しないでください。
はじめる前に手順
- 更新が必要なデバイスを識別します。
- 次のオプションのいずれかを別個の行に記載したテキスト ファイルを作成します。
(注)
デバイス名、説明、または電話番号の値をカスタム更新ファイルに入力します。 カスタム更新ファイルにヘッダーを含める必要はありません。
- テキスト ファイルを Cisco Unified Communications Manager サーバにアップロードします。 サーバへのファイルのアップロードを参照してください。
ステップ 1 の順に選択します。 [電話の更新(カスタム)(Update Phones Custom Configuration)] ウィンドウが表示されます。
ステップ 2 [更新対象:電話、検索条件:(Update Phones where)] ドロップダウン リスト ボックスで、作成したカスタム ファイルのタイプを次の条件から選択します。 ステップ 3 カスタム ファイルのリストで、この更新用のカスタム ファイルのファイル名を選択します。 ステップ 4 [検索(Find)] をクリックします。 クエリー結果が予想どおりではなかった場合は、カスタム ファイルの選択を変更することができます。
次の作業
電話機を更新する手順を完了するには、更新パラメータの選択に進みます。
更新パラメータの選択
手順
ステップ 1 [電話の更新のクエリー(Update Phones Query)] ウィンドウで、[次へ(Next)] をクリックします。 選択したクエリーのタイプが、[電話の更新(Update Phones)] に表示されます。 クエリーのタイプを変更する場合は、[戻る(Back)] をクリックします。 ステップ 2 更新する前にユーザをログアウトするには、[更新前にユーザをログアウト(Logout Users Before Update)] チェックボックスをオンにします。 フィールドを 1 つも選択しない場合、このオプションを使用してユーザを一括してログ アウトすることもできます。 ステップ 3 クエリーまたはカスタム ファイルで定義したレコードすべてに対して、更新する設定値を指定します。 更新するパラメータは複数選択できます。 パラメータの説明については、表 1を参照してください。 ステップ 4 更新するフィールドの左側にある [更新(update)] チェックボックスをオンにします。 この操作により、フィールドの既存の値を上書きするように BAT に指示します。
(注) BAT は、[更新(update)] チェックボックスをオンにしたフィールドしか更新しないことに注意してください。
ステップ 5 チェックマークが付いたパラメータの [値(Value)] フィールドに新しい値を入力するか、リスト ボックスから値を選択します。 ステップ 6 [電話のリセット/リスタート(Reset/Restart Phones)] 領域で、次の選択項目のいずれかを選択します。 ステップ 7 必要な電話機パラメータを更新します。 フィールドの説明については、表 1を参照してください。 ステップ 8 レコードを更新するジョブを作成するには、[送信(Submit)] をクリックします。 [一括管理(Bulk Administration)] メイン メニューの [ジョブスケジューラ(Job Scheduler)] オプションを使用して、このジョブのスケジュールやアクティブ化を行います。
関連資料
関連情報
電話機を更新する場合のフィールドの説明
次の表で、電話機を更新する場合に表示されるフィールドすべてについて説明します。 一部のデバイス タイプには、すべての電話機設定値を必要としないものもあります。
一部のフィールドに示される値は、 Cisco Unified Communications Manager から表示されます。 これらの値は、 Cisco Unified Communications Manager の管理ページを使用して設定する必要があります。
(注)
一部のフィールドには 2 つのチェックボックスがあることに注意してください。 最初のチェックボックスによって、フィールドを更新する必要があるかどうかが決定されます。2 番目のチェックボックスによって、フィールドに使用される値(オンまたはオフ)が決定されます。
ヒント
フィールドを更新する必要がある場合は、最初のチェックボックスをオンにします。2 番目のチェックボックスをチェックしてオンまたはオフにすると、その値が選択した電話機に適用されます。 たとえば、[サイレント(Do Not Disturb)] の最初のチェックボックスをオンにして、2 番目のチェックボックスをオフのままにした場合、電話機は [サイレントDo Not Disturb] がオフの状態で更新されます。
表 1 電話機を更新する場合のフィールドの説明 フィールド
説明
[説明(Description)]
デバイスを識別しやすくする説明を入力します。 説明には、任意の言語で最大 50 文字を指定できますが、二重引用符(")、パーセント記号(%)、アンパサンド(&)、バックスラッシュ(\)、山カッコ(<>)は使用できません。
[デバイスプール(Device Pool)]
このグループの電話機またはポートが属するデバイス プールを選択します。
デバイス プールは、デバイスに共通した特性のセット(たとえば、地域、日付/時刻グループ、 Cisco Unified Communications Manager グループ、自動登録用のコーリング サーチ スペースなど)を定義します。
[共通デバイス設定(Common Device Configuration)]
この電話機を割り当てる共通デバイス設定を選択します。 共通デバイス設定には、特定のユーザに関連付けられた属性(サービスまたは機能)が含まれています。 共通デバイス設定は、[共通デバイス設定(Common Device Configuration)] ウィンドウで設定します。 共通デバイス設定の詳細については、『Cisco Unified Communications Manager アドミニストレーション ガイド』を参照してください。
共通デバイス設定の設定値を参照するには、[詳細の表示(View Details)] リンクをクリックします。
[電話ボタンテンプレート(Phone Button Template)]
適切な電話ボタン テンプレートを選択します。 電話ボタン テンプレートは、電話機上のボタンの設定を決定し、各ボタンに使用される機能(回線、スピード ダイヤルなど)を指定します。
Cisco Unified Communications Manager では、H.323 クライアントまたは CTI ポートに対してこのフィールドを利用できません。
[ソフトキーテンプレート(Softkey Template)]
このグループ内のすべての電話機に使用されるソフトキー テンプレートを選択します。
[共通の電話プロファイル(Common Phone Profile)]
ドロップダウン リスト ボックスで、使用可能な共通の電話プロファイルのリストから、共通の電話プロファイルを選択します。
[コーリングサーチスペース(Calling Search Space)]
このグループの電話機またはポートが属するコーリング サーチ スペースを選択します。
コーリング サーチ スペースは、ルート パーティションの集合を指定するものです。ルート パーティションの集合は、ダイヤルされた番号のルーティング方法を決定するために検索されます。
[AARコーリングサーチスペース(AAR Calling Search Space)]
自動代替ルーティング(AAR)の実行時にデバイスが使用するコーリング サーチ スペースを選択します。 AAR コーリング サーチ スペースは、帯域幅不足によってコールがブロックされないように、収集された(発信)番号のルーティング方法を決定するために検索されるルート パーティションの集合を指定します。
[メディアリソースグループリスト(Media Resource Group List)]
このグループの電話機またはポートが属するメディア リソース グループ リスト(MRGL)を選択します。
MRGL は、優先順位が付けられたメディア リソース グループのリストを指定します。 アプリケーションは、MRGL で指定された優先順位に従って、使用可能なメディア リソースの中から、必要なメディア リソースを選択できます。
[ユーザ保留MOH音源(User Hold MOH Audio Source)]
このグループの電話機またはポートのユーザ保留オーディオ ソースを選択します。
ユーザ保留オーディオ ソースは、ユーザがコールを保留にしたときに音楽を再生します。
[ネットワーク保留MOH音源(Network Hold MOH Audio Source)]
このグループの IP Phone または CTI ポートが利用するネットワーク保留オーディオ ソースを選択します。
ネットワーク保留オーディオ ソースは、システムがコールを保留にするとき(たとえば、ユーザがコールを転送したときや、コール パークにしたとき)に音楽を再生します。
[ロケーション(Location)]
このグループの電話機またはポートが属するロケーションを選択します。
ロケーションは、帯域幅制限付き接続を使用してアクセスされるリモート ロケーションを指します。
[AARグループ(AAR Group)]
このデバイスの自動代替ルーティング(AAR)グループを選択します。 AAR グループは、帯域幅不足のためにコールがブロックされないように、コールをルーティングするためのプレフィックス番号を提供します。 AAR グループが指定されていない場合、Cisco Unified Communications Manager では、デバイス プールまたは回線に関連付けられているグループが使用されます。
[ユーザロケール(User Locale)]
このユーザに関連付ける国/地域と言語を選択します。
この選択内容によって、言語やフォントを含むロケール属性のどれをこのユーザに適用するか、およびこのユーザの Cisco Unified Communications Manager のユーザ ウィンドウと電話機をどの言語で表示するかが決まります。
[ネットワークロケール(Network Locale)]
このユーザに関連付けるネットワーク ロケールを選択します。
ネットワーク ロケールは、シスコのゲートウェイと電話機が、特定地域の PSTN およびその他のネットワークと通信するときに使用するトーンと断続周期を提供します。
[ビルトインブリッジ(Built In Bridge)]
[ビルトインブリッジ(Built In Bridge)] ドロップダウン リスト ボックスを使用する([オン(On)]、[オフ(Off)]、または [デフォルト(Default)] を選択する)ことにより、割り込み機能のビルトイン会議ブリッジを使用可能または使用不可にします。
設定情報の詳細については、『 Cisco Unified Communications Manager 機能およびサービス ガイド』の「割り込みとプライバシー」を参照してください。
[プライバシ(Privacy)]
プライバシーを必要とする各電話機について、[プライバシ(Privacy)] ドロップダウン リスト ボックスで [オン(On)] を選択します。
設定情報の詳細については、『 Cisco Unified Communications Manager 機能およびサービス ガイド』の「割り込みとプライバシー」を参照してください。
[デバイスモビリティモード(Device Mobility Mode)]
ドロップダウン リスト ボックスから、このデバイスに対してデバイス モビリティ機能のオン/オフを切り替えるか、[デフォルト(Default)] を選択してデフォルトのデバイス モビリティ モードを使用します。
[現在のデバイスモビリティ設定の表示(View Current Device Mobility Settings)] をクリックすると、次のデバイス モビリティ パラメータの現在の値が表示されます。
- [Cisco Unified CMグループ(Cisco Unified Communications Manager Group)]
- [ローミング用デバイスプール(Roaming Device Pool)]
- [ロケーション(Location)]
- [リージョン(Region)]
- [ネットワークロケール(Network Locale)]
- [AARグループ(AAR Group)]
- [AARコーリングサーチスペース(AAR Calling Search Space)]
- [デバイスコーリングサーチスペース(Device Calling Search Space)]
- [メディアリソースグループリスト(Media Resource Group List)]
- [SRST]
ヒント 設定情報の詳細については、『Cisco Unified Communications Manager 機能およびサービス ガイド』の「デバイス モビリティ」の章を参照してください。 [モビリティユーザID(Mobility User ID)]
ドロップダウン リスト ボックスから、このデュアルモード フォンが割り当てられているユーザのユーザ ID を選択します。
(注) モビリティ ユーザ ID 設定は、デュアルモード フォンのモバイル コネクトおよびモバイル ボイス アクセスのために使用されます。
(注) オーナーのユーザ ID とモバイル ユーザ ID は異なることがあります。
[オーナーのユーザID(Owner User ID)]
プライマリ電話機ユーザのユーザ ID を入力します。
[電話機のパーソナライゼーション(Phone Personalization)]
ドロップダウン リスト ボックスで、このデバイスの Cisco Unified Phone Designer 機能を有効または無効にするか、[デフォルト(Default)] を選択して共通の電話プロファイルに設定されている電話機のパーソナライゼーションを使用します。
[サービスのプロビジョニング(Services Provisioning)]
ドロップダウン リスト ボックスにある次の値から、使用するサービスのプロビジョニングの設定値を選択します。
このパラメータでは、電話機が設定ファイル(内部)からプロビジョニングされたサービスまたはサービス URL(外部の URL)から受信したサービスを使用するか、あるいはその両方を使用するかを制御します。 [外部URL(External URLs)] では、サード パーティのプロビジョニング サーバとの下位互換性を確保します。 [両方(Both)] オプションを使用すると、設定ファイルで指定されたサービスを登録できます。また、外部のプロビジョニング サーバからサービスを追加することもできます。
これは必須フィールドです。
[電話ロード名(Phone Load Name)]
該当する場合は、カスタム電話機ロードを入力します。
(注) このフィールドに入力される値は、選択されたモデルのデフォルト値を上書きし、Cisco Unified IP Phone 用のカスタム ソフトウェアを指定します。
[ワンボタン割込み(Single Button Barge)]
ドロップダウン リスト ボックスで、このデバイスに対してワンボタン割り込み/C 割り込み機能を有効または無効にするか、[デフォルト(Default)] を選択してサービス パラメータ設定を使用します。
[回線をまたいで参加(Join Across Lines)]
ドロップダウン リスト ボックスで、このデバイスに対して回線をまたいで参加機能を有効または無効にするか、[デフォルト(Default)] を選択してサービス パラメータ設定を使用します。
[信頼されたリレーポイントを使用(Use Trusted Relay Point)]
ドロップダウン リスト ボックスで、 Cisco Unified Communications Manager が信頼されたリレーポイント(TRP)のデバイスをこのメディア エンドポイントで挿入するかどうかについて、有効化または無効化を指定します。 次のいずれかの値を選択します。
- [デフォルト(Default)]:この値を選択すると、デバイスでは、このデバイスに関連付けられた共通デバイス設定の [信頼されたリレーポイントを使用(Use Trusted Relay Point)] の設定値が使用されます。
- [オフ(Off)]:この値を選択すると、このデバイスに対して TRP が使用不可になります。 この設定値は、このデバイスに関連付けられた共通デバイス設定の [信頼されたリレーポイントを使用(Use Trusted Relay Point)] の設定値よりも優先されます。
- [オン(On)]:この値を選択すると、このデバイスに対して TRP が使用可能になります。 この設定値は、このデバイスに関連付けられた共通デバイス設定の [信頼されたリレーポイントを使用(Use Trusted Relay Point)] の設定値よりも優先されます。
信頼されたリレー ポイント(TRP)デバイスには、Trusted Relay Point というラベルの付いた MTP またはトランスコーダ デバイスが指定されます。
エンドポイントに複数のリソース(たとえば、トランスコーダや RSVP エージェント)が必要な場合は、 Cisco Unified Communications Manager により、TRP は関連付けられたエンドポイント デバイスに最も近い位置に配置されます。
エンドポイントに TRP と MTP の両方が必要な場合、TRP は必須の MTP として使用されます。
ヒント コールの動作の詳細については、『 Cisco Unified Communications Manager システム ガイド』で TRP の挿入に関する要件の説明を参照してください。 [発呼側トランスフォーメーションCSS(Calling Party Transformation CSS)]
この設定により、デバイスの発呼側の番号をローカライズできるようになります。 選択する発呼側トランスフォーメーション CSS に、このデバイスに割り当てる発呼側トランスフォーメーション パターンが含まれていることを確認してください。
発呼側トランスフォーメーション CSS が存在するパーティションにパターンを割り当てる場合、デバイスは発呼側トランスフォーメーション パターンの属性を使用します。
ヒント 設定情報の詳細については、『 Cisco Unified Communications Manager 機能およびサービス ガイド』を参照してください。 [位置情報(Geolocation)]
ドロップダウン リスト ボックスで、位置情報を選択します。
未指定の位置情報を選択できます。これは、このデバイスを位置情報に関連付けないことを示します。
メニュー オプションで設定された位置情報を選択することもできます。
[機能管理ポリシー(Feature Control Policy)]
このグループの電話機の機能管理ポリシーを選択します。
機能管理ポリシーは、機能のアピアランスや電話機に表示される関連ソフトキーを指定します。
[BLFオーディオアラート設定(電話がアイドルのとき)(BLF Audible Alert Setting (Phone Idle))]
この必須フィールドでは、ドロップダウン リスト ボックスにある次の値から、使用する BLF オーディオ アラートの設定値を選択します。
コールがビジー ランプ フィールド(BLF)ボタンでモニタされている回線のいずれかに着信した場合、このパラメータで現在アイドルの電話機にオーディオ アラートとビジュアル アラートを送信します。
[BLFオーディオアラート設定(電話がビジーのとき)(BLF Audible Alert Setting (Phone Busy))]
この必須フィールドでは、コールがビジー ランプ フィールド(BLF)ボタンでモニタされている回線のいずれかに着信した場合、このパラメータで現在使用中の電話機にオーディオ アラートとビジュアル アラートを送信します。
ドロップダウン リスト ボックスにある次の値から、使用する BLF オーディオ アラートの設定値を選択します。
[常にプライム回線を使用する(Always Use Prime Line)]
ドロップダウン リスト ボックスにある次の値から、使用する [常にプライム回線を使用する(Always Use Prime Line)] の設定値を選択します。
[ボイスメッセージには常にプライム回線を使用する(Always Use Prime Line for Voice Message)]
ドロップダウン リスト ボックスにある次の値から、使用する [ボイスメッセージには常にプライム回線を使用する(Always Use Prime Line for Voice Message)] の設定値を選択します。
[デバイスプールの発呼側トランスフォーメーションCSSを使用(Use Device Pool Calling Party Transformation CSS)]
デバイスに割り当てられているデバイス プールで設定された発呼側トランスフォーメーション CSS を使用するには、このチェックボックスをオンにします。 このチェックボックスをオフにすると、デバイスは、デバイスの設定ウィンドウで設定された発呼側トランスフォーメーション CSS を使用します。
[プレゼンテーションインジケータを無視(Ignore Presentation Indicators)]
システムで表示インジケータを無視する必要がある場合に、このチェックボックスをオンにします。
[ビデオコールをオーディオとして再試行(Retry Video Call as Audio)]
ビデオ コールをオーディオ コールとしてリトライするには、このチェックボックスをオンにします。
[CTIからのデバイスの制御を許可(Allow Control of Device from CTI)]
CTI からこのデバイスを制御およびモニタできるようにするには、このチェックボックスをオンにします。
関連付けられた電話番号が共有回線を指定している場合、少なくとも 1 つの関連付けられたデバイスが、デバイス タイプおよび CTI がサポートするプロトコルの組み合わせを指定している限り、チェックボックスをオンにする必要があります。
[ハントグループにログイン(Logged Into Hunt Group)]
このチェックボックスは、デフォルトですべての電話機に対してオンになり、電話機が現在ハント リスト(グループ)にログインしていることを示します。 電話機がハント リストに追加されたときに、管理者はこのチェックボックスをオン(オフ)にすることにより、ユーザをログインまたはログアウトさせることができます。
ユーザは電話機のソフトキーを使用して、その電話機をハント リストにログインさせ、またはハント リストからログアウトさせます。
[リモートデバイス(Remote Device)]
SCCP を介した接続で、リモート サイトへの接続時間が遅延する場合、[電話の設定(Phone Configuration)] ウィンドウにある [リモートデバイス(Remote Device)] チェックボックスをオンにします。 このチェックボックスをオンにすると、Cisco Unified Communications Manager では、電話デバイスが登録されたときにバッファを割り当て、電話機に SCCP メッセージを組み込みます。
(注) この機能はリソースを消費するので、SCCP を実行する電話機でシグナリング遅延が発生する場合にのみ、このチェックボックスをオンにしてください。 このオプションは、ほとんどのユーザには必要ありません。
[保護されたデバイス(Protected Device)]
このチェックボックスをオンにして、電話機を"保護された"デバイスとして指定します。 これにより、コールが暗号化されていて、かつ、両方の電話機が保護されたデバイスとして設定されている場合、電話機では、2 秒間のトーンを再生し、ユーザに通知することができます。 このトーンは、コールが応答されたときに両方の電話機で再生されます。 このトーンが再生されるのは、両方の電話機が「保護」になっていて、暗号化メディアを介してコールが発信された場合だけです。
ヒント セキュアなトーン機能と設定要件の詳細については、『Cisco Unity Connection System Administration Guide』を参照してください。 [プロトコル固有情報(Protocol Specific Information)]
[パケットキャプチャモード(Packet Capture Mode)]
ドロップダウン リスト ボックスから、信号パケット キャプチャに設定するモードを選択します。
[なし(None)]:モードを指定しない場合は [なし(None)] を選択します。
[リアルタイムモード(Real-Time Mode)]:リアルタイム信号パケット キャプチャに使用します。
[バッチ処理モード(Batch Processing Mode)]:信号パケット キャプチャのバッチ処理に使用します。
[パケットキャプチャ時間(Packet Capture Duration)]
パケット キャプチャの時間を分単位で入力します。 最大 300 分の継続時間を入力できます。 デフォルトの継続時間は 60 分です。
[プレゼンスグループ(Presence Group)]
プレゼンス機能で使用すると、SIP または SCCP を実行する電話機は、BLF スピード ダイヤル ボタンとして電話機に設定されたプレゼンス エンティティに関するステータス(たとえば、電話番号)を要求するので、ウォッチャとして機能します。
電話機によってプレゼンス エンティティのステータスを受信するには、電話番号に適用されるプレゼンス グループのステータスを [プレゼンスグループの設定(Presence Group Configuration)] ウィンドウに示されるとおり表示するよう許可されているプレゼンス グループを選択します。
ヒント プレゼンス機能の詳細については、『 Cisco Unified Communications Manager 機能およびサービス ガイド』を参照してください。 [デバイスセキュリティプロファイル(Device Security Profile)]
SCCP および SIP を実行する電話機の場合は、デバイスに適用するセキュリティ プロファイルを選択します。
すべての電話で、セキュリティ プロファイルを適用する必要があります。 電話機がセキュリティをサポートしていない場合は、非セキュア プロファイルを選択します。
ヒント プロファイルに含まれている Certificate Authority Proxy Function(CAPF)設定値は、[電話の設定(Phone Configuration)] ウィンドウに表示される CAPF 設定値に関連しています。 製造元でインストールされた証明書(MIC)またはローカルで有効な証明書(LSC)を管理するには、プロファイルと [電話の設定(Phone Configuration)] ウィンドウの両方で、CAPF 設定値を指定する必要があります。 [SUBSCRIBEコーリングサーチスペース(SUBSCRIBE Calling Search Space)]
プレゼンス機能で使用した場合、電話機からの登録要求を Cisco Unified Communications Manager がルーティングする方法は、SUBSCRIBE コーリング サーチ スペースによって決まります。 ドロップダウン リスト ボックスから、この目的に使用するコーリング サーチ スペースを選択します。
ヒント プレゼンス機能の詳細については、『 Cisco Unified Communications Manager 機能およびサービス ガイド』を参照してください。 [アウトバウンドコールロールオーバー(Outbound Call Rollover)]
ドロップダウン リスト ボックスから、発信コール用に使用するロールオーバー オプションを選択します。
[ロールオーバーなし(No Rollover)]:ロールオーバー機能をオフに切り替えるには、このオプションを選択します。 このモードでは会議と転送は機能しません。
[同一DN内のロールオーバー(Rollover Within Same DN)]:同一 DN 内でロールオーバーを使用するには、このオプションを使用します。 (異なる回線で)同じ電話番号を使用すると、会議とコール転送を実行することができます。
[任意の回線へのロールオーバー(Rollover to any line)]:任意の回線にロールオーバーするには、このオプションを使用します。 元のコールと異なる電話番号と回線を使用すると、会議とコール転送を実行することができます。
[不在ポート(Unattended Port)]
このデバイス上の不在ポートを示すには、このチェックボックスをオンにします。
[DTMF受信が必要(Require DTMF Reception)]
SIP および SCCP を実行する電話機の場合、このチェックボックスをオンにすると、この電話機で DTMF を受信する必要があります。
[外部データ位置情報(External Data Locations)]
[情報(Information)]
情報ボタンのヘルプ テキスト URL を入力します。
[ディレクトリ(Directory)]
ディレクトリ サーバの URL を入力します。
[メッセージ(Messages)]
ボイスメッセージのアクセス パイロット番号を入力します。
[サービス(Services)]
サービス メニューの URL を入力します。
[認証サーバ(Authentication Server)]
電話機の Web サーバに対する要求を認証するときに、電話機が使用する URL を入力します。 認証 URL を指定しない場合は、認証を必要とする Cisco Unified IP Phone の拡張機能は動作しません。 デフォルト値を受け入れるには、このフィールドをブランクのままにします。
デフォルトでは、この URL は、インストール時に設定された Cisco Unified IP Phone セルフケア ポータル ウィンドウにアクセスします。
[プロキシサーバ(Proxy Server)]
電話機の HTTP クライアントから非ローカル ホスト アドレスにアクセスするために、プロキシ HTTP 要求に使用されるホストおよびポート(たとえば、proxy.cisco.com:80)を入力します。
電話機が、サービスの中で URL(たとえば、www.cisco.com)を受信するときに cisco.com ドメインで設定されていない場合、その電話機はプロキシサーバを使用してその URL にアクセスします。 cisco.com ドメインで設定されている場合、電話機は、URL と同じドメインにいるので、プロキシを使用せずに URL にアクセスします。
デフォルト値を受け入れるには、このフィールドをブランクのままにします。
[アイドル(Idle)]
[アイドルタイマー(Idle Timer)] フィールドで指定された時間、電話機が使用されなかったときに、Cisco Unified IP Phone 画面に表示される URL を入力します。 たとえば、電話機が 5 分間使用されなかったときに、画面にロゴを表示できます。 デフォルト値を使用する場合には、このフィールドをブランクのままにします。
[アイドルタイマー(Idle Timer)]
電話機に許容される非動作時間(秒数)を入力します。非動作のままこの時間が経過すると、電話機は [アイドル(Idle)] フィールドに指定された URL を表示します。 デフォルト値を使用する場合には、このフィールドをブランクのままにします。
[セキュア認証URL(Secure Authentication URL)]
電話機の Web サーバに対する要求を検証するために、この電話機が使用するセキュア URL を入力します。
(注) [セキュア認証URL(Secure Authentication URL)] の値を指定しないと、デバイスでは非セキュア URL が使用されます。 セキュア URL と非セキュア URL の両方を指定した場合、デバイスではデバイスの持つ機能に応じて適切な URL が選択されます。
デフォルトでは、この URL は、インストール時に設定された Cisco Unified IP Phone セルフケア ポータル ウィンドウにアクセスします。
デフォルト値を受け入れるには、このフィールドをブランクのままにします。
最大長は 255 文字です。
[セキュアディレクトリURL(Secure Directory URL)]
電話機がディレクトリ情報を取得する際の取得元となるサーバのセキュア URL を入力します。 このパラメータは、ディレクトリ ボタンを押したときに、セキュリティ保護された Cisco Unified IP Phone で使用する URL を指定します。
(注) [セキュアディレクトリURL(Secure Directory URL)] の値を指定しないと、デバイスでは非セキュア URL が使用されます。 セキュア URL と非セキュア URL の両方を指定した場合、デバイスではデバイスの持つ機能に応じて適切な URL が選択されます。
デフォルト値を受け入れるには、このフィールドをブランクのままにします。
最大長は 255 文字です。
[セキュアアイドルURL(Secure Idle URL)]
[アイドルタイマー(Idle Timer)] フィールドの指定に従って電話機がアイドル状態になったときに、 Cisco Unified IP Phone のディスプレイに表示する情報のセキュア URL を入力します。 たとえば、電話機が 5 分間使用されなかったときに、LCD 上にロゴを表示できます。
(注) [セキュアアイドルURL(Secure Idle URL)] の値を指定しないと、デバイスでは非セキュア URL が使用されます。 セキュア URL と非セキュア URL の両方を指定した場合、デバイスではデバイスの持つ機能に応じて適切な URL が選択されます。
デフォルト値を受け入れるには、このフィールドをブランクのままにします。
最大長は 255 文字です。
[セキュア情報URL(Secure Information URL)]
Cisco Unified IP Phone がヘルプ テキスト情報を検索できるサーバ ロケーションのセキュア URL を入力します。 この情報は、ユーザが情報([i])ボタンまたは疑問符([?])ボタンを押すと表示されます。
(注) [セキュア情報URL(Secure Information URL)] の値を指定しないと、デバイスでは非セキュア URL が使用されます。 セキュア URL と非セキュア URL の両方を指定した場合、デバイスではデバイスの持つ機能に応じて適切な URL が選択されます。
デフォルト値を受け入れるには、このフィールドをブランクのままにします。
最大長は 255 文字です。
[セキュアメッセージURL(Secure Messages URL)]
メッセージ サーバのセキュア URL を入力します。 ユーザがメッセージ ボタンを押すと、Cisco Unified IP Phone はこの URL に接続されます。
(注) [セキュアメッセージURL(Secure Messages URL)] の値を指定しないと、デバイスでは非セキュア URL が使用されます。 セキュア URL と非セキュア URL の両方を指定した場合、デバイスではデバイスの持つ機能に応じて適切な URL が選択されます。
デフォルト値を受け入れるには、このフィールドをブランクのままにします。
最大長は 255 文字です。
[セキュアサービスURL(Secure Services URL)]
Cisco Unified IP Phone サービスのセキュア URL を入力します。 この設定は、ユーザがサービス ボタンを押したときに、セキュアな Cisco Unified IP Phone が接続される場所を指定します。
(注) [セキュアサービスURL(Secure Services URL)] の値を指定しないと、デバイスでは非セキュア URL が使用されます。 セキュア URL と非セキュア URL の両方を指定した場合、デバイスではデバイスの持つ機能に応じて適切な URL が選択されます。
デフォルト値を受け入れるには、このフィールドをブランクのままにします。
最大長は 255 文字です。
[ホットラインデバイス(Hotline Device)]
「T」または「F」を入力します。 ホットライン デバイスは、他のホットライン デバイスにだけ接続できます。 この機能によって、オフフックになると自動的に 1 つの電話番号をダイヤルするように電話機を設定する PLAR 機能が拡張されます。 ホットラインでは、PLAR を使用するデバイスに適用できる制限事項が追加されます。
また、ホットラインを実装するには、補足サービス ソフトキーのないソフトキー テンプレートを作成して、ホットライン デバイスに適用する必要があります。
[内線情報(Extension Information)]
[エクステンションモビリティの有効化(Enable Extension Mobility)]
エクステンション モビリティを使用可能にする場合に、このチェックボックスをオンにします。
この機能を無効にする場合は 0(オフ)を、有効にする場合は 1(オン)を選択します。
エクステンション モビリティを使用すると、ユーザは、 Cisco Unified IP Phone にログインおよびログアウトすることができます。 エクステンション モビリティの詳細については、 『Cisco Unified Communications Manager 機能およびサービス ガイド』を参照してください。
[IPサービス1(IP Services1)]
Cisco Unified Communications Manager の管理ページを使用して、設定済みのサービスを選択します。
[IPサービス2(IP Services2)]
Cisco Unified Communications Manager の管理ページを使用して、設定済みのサービスを選択します。
Cisco Unified Communications Manager 一括管理(BAT)を使用して、1 つのトランザクションで更新できる IP サービスは最大 2 つです。
[CAPFの情報(Certification Authority Proxy Function (CAPF) Information)]
(これらのパラメータは、認証または暗号化のサポート機能のあるデバイスにのみ表示されます)
[証明書の操作(Certificate Operation)]
ドロップダウン リスト ボックスで、次のオプションの中から実行する証明書のオペレーションを選択します。
[一意の認証文字列を各デバイスに生成(Generate Unique Authentication String for Each Device)]
各デバイスに一意の認証文字列を生成する場合は、このチェックボックスをオンにします。
[認証文字列(Authentication String)]
[認証モード(Authentication Mode)] が [認証ストリング(By Authentication String)] の場合は、認証文字列を入力します。 または、システム生成の文字列を入手するために [文字列を生成(Generate String)] をクリックします。
[操作の完了期限(Operation Completes By)]
証明書のオペレーションを完了する期限の日付を入力します。 日付形式は、YYYY: MM: DD: HH です。 デフォルトの完了日付は現在のシステム日付の 10 日後です。
[MLPP情報(Multilevel Precedence and Preemption (MLPP) Information)]
[MLPP通知(MLPP Indication)]
(使用可能な場合)優先トーンを再生する機能のあるデバイスが、MLPP 優先コールを行うときにその機能を使用するかどうかを指定します。
ドロップダウン リスト ボックスにある次のオプションの中から、デバイスに割り当てる設定を選択します。
- [デフォルト(Default)]:このデバイスは、デバイス プールから [MLPP通知(MLPP Indication)] の設定値を引き継ぎます。
- [オフ(Off)]:デバイスは MLPP 優先コールの通知を送信しません。
- [オン(On)]:デバイスは MLPP 優先コールの通知を送信します。
(注) [MLPPプリエンプション(MLPP Preemption)] が [強制(Forceful)] で [MLPP通知(MLPP Indication)] が [オフ(Off)] という組み合わせではデバイスを設定しないでください。
[MLPPプリエンプション(MLPP Preemption)]
進行中のコールを優先できるデバイスが MLPP 優先コールの発信時にその優先機能を使用するかどうかを指定します(使用可能な場合)。
ドロップダウン リスト ボックスにある次のオプションの中から、デバイスに割り当てる設定を選択します。
- [デフォルト(Default)]:このデバイスは、デバイス プールから [MLPPプリエンプション(MLPP Preemption)] の設定値を引き継ぎます。
- [無効(Disabled)]:デバイスは MLPP 優先コールを行うときに進行中のコールをプリエンプション処理しません。
- [強制(Forceful)]:デバイスは MLPP 優先コールを行うときに進行中のコールをプリエンプション処理します。
(注) [MLPPプリエンプション(MLPP Preemption)] が [強制(Forceful)] で [MLPP通知(MLPP Indication)] が [オフ(Off)] という組み合わせではデバイスを設定しないでください。
[MLPPドメイン(MLPP Domain)]("0000FF" など)
このデバイスに関連付けられている MLPP ドメインの 16 進数値を入力します。 ブランクまたは 0 ~ FFFFFF の値である必要があります。
[サイレント(Do Not Disturb)](DND)
[サイレント(Do Not Disturb)]
DND 機能を有効にする場合、このチェックボックスをオンにします。
[DNDオプション(DND Option)]
ドロップダウン リスト ボックスで、次のいずれかの DND オプションを選択します。
[DND着信呼警告(DND Incoming Call Alert)]
ドロップダウン リスト ボックスから、次のオプションのいずれかを選択します。
[セキュアシェル情報(Secure Shell Information)]
[セキュアシェルユーザ(Secure Shell User)]
セキュア シェル ユーザのユーザ ID を入力します。 設定している電話機がセキュリティ保護されたシェルへのアクセスをサポートしていない場合、このフィールドは表示されません。 Cisco Technical Assistance Center(TAC)は、トラブルシューティングのためにセキュリティ保護されたシェルを使用します。 詳細については、TAC に問い合わせてください。
[セキュアシェルパスワード(Secure Shell Password)]
セキュア シェル ユーザのパスワードを入力します。 設定している電話機がセキュリティ保護されたシェルへのアクセスをサポートしていない場合、このフィールドは表示されません。 詳細については、TAC に問い合わせてください。
[IP Phoneサービスの割り当て(Assign IP Phone Services)]
[このテンプレートからすべてのサービスを追加(Add All Services From This Template)]
ドロップダウン リスト ボックスから、電話の更新に使用するサービスのリストが入ったテンプレートを選択します。
[IP Phoneサービスの編集(Edit IP Phone Services)] リンクをクリックすると、テンプレート上の登録済み Cisco IP Phone サービスを更新できます。
[重複の削除(Remove Duplicate)]
重複した IP Phone サービスを削除するには、このチェックボックスをオンにします。 このチェックボックスをオンにすると、重複したサービス登録が電話機とユーザ デバイス プロファイルから削除されます。 IP システムが、IP サービス名に基づいてサービスを削除します。
[プロダクト固有の情報(Product Specific Information)]
[デバイスセキュリティモード(Device Security Mode)]
ドロップダウン リスト ボックスから、デバイスに設定するモードを選択します。
[システムデフォルトの使用(Use System Default)]:電話機はエンタープライズ パラメータのデバイス セキュリティ モードに指定された値を使用します。
[非セキュア(Non-secure)]:電話機にセキュリティ機能はありません。 TCP 接続が Cisco Unified Communications Manager に対して開きます。
[認証のみ(Authenticated)]: Cisco Unified Communications Manager は電話機の整合性と認証を提供します。 NULL/SHA を使用する TLS 接続を開始します。
[暗号化(Encrypted)]: Cisco Unified Communications Manager は、電話の整合性、認証、および暗号化を提供します。 AES128/SHA を使用する TLS 接続を開始します。
このフィールドが適用されるのは、電話機モデルが認証または暗号化をサポートしている場合だけです。
[すべての電話およびデバイスプロファイルからの重複IPサービスの削除(Remove Duplicate IP Services from all Phones and Device Profiles)]
重複した IP Phone サービスを削除するには、このチェックボックスをオンにします。 このチェックボックスをオンにすると、重複したサービス登録が電話機とユーザ デバイス プロファイルから削除されます。 IP システムが、IP サービス名に基づいてサービスを削除します。
[スピーカフォンの無効化(Disable SpeakerPhone)]
スピーカフォンを無効にするには、このチェックボックスをオンにします。
[スピーカフォンとヘッドセットの無効化(Disable Speakerphone and Headset)]
スピーカフォンとヘッドセットを無効にするには、このチェックボックスをオンにします。
[自動転送遅延(Forwarding Delay)]
このフィールドを使用して自動転送遅延を有効または無効にします。 コールの自動転送前にポートを数秒間遅延させる場合、有効にします。
[PCポート(PC Port)]
このフィールドを使用して内部スイッチを持つ電話機の PC ポートを有効または無効にします。 ユーザは、電話機背面の "10/100 PC" というラベルの付いたポートを使用して、PC またはワークステーションを電話機に接続できます。
[設定アクセス(Setting Access)]
このフィールドを使用してユーザが電話機設定値にアクセスするかどうかを選択します。 [有効(Enabled)] および [無効(Disable)] を選択できます。
[Gratuitous ARP]
Gratuitous ARP を制御するには、[有効(Enabled)] または [無効(Disabled)] を選択します。
[PCボイスVLANアクセス(PC Voice VLAN Access)]
PC ボイス VLAN へのアクセスを制御するには、[有効(Enabled)] または [無効(Disabled)] を選択します。
[ビデオ機能(Video Capabilities)]
ビデオ機能アクセスを制御するには、[有効(Enabled)] または [無効(Disabled)] を選択します。
[自動回線選択(Auto Line Select)]
電話機での自動回線選択を制御するには、[有効(Enabled)] または [無効(Disabled)] を選択します。
[Webアクセス(Web Access)]
電話機での Web アクセスを制御するには、[有効(Enabled)] または [無効(Disabled)] を選択します。