この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
目次
ここでは、Cisco Unified Communications Manager License Count Utility でのインベントリの管理について説明します。 次の項で構成されています。
ライセンス レポートを要求する前に、Cisco Unified Communications Manager License Count Utility インベントリに Cisco Unified Communications Manager サーバを追加する必要があります。
はじめる前にUnified CM のプロパティを表示および変更するには、[編集(Edit)] ダイアログボックスを使用できます。 次の操作を実行できます。
ステップ 1 | [クラスタ(Clusters)] タブで、Unified CM サーバを選択します。 |
ステップ 2 |
テーブル内の Unified CM レコードをダブルクリックするか、[編集(Edit)] をクリックします。 [編集(Edit)] ダイアログボックスが表示されます。 |
ステップ 3 | 必要な情報を変更します。 |
ステップ 4 | [OK] をクリックして変更を保存します。 |
Cisco Unified Communications Manager License Count Utility から Unified CM サーバを削除するには、この手順を使用します。
ステップ 1 |
[クラスタ(Clusters)] タブで、削除する Unified CM サーバを選択します。 複数の Unified CM サーバを削除するには、Ctrl キーを押しながら、テーブル内の対応する行をクリックします。 |
ステップ 2 |
Unified CM サーバを削除するには、[削除(Delete)] をクリックします。 確認メッセージが表示されます。 |
ステップ 3 | [削除(Delete)] をクリックして、Unified CM サーバを削除します。 |
ライセンス レポートを生成し、表示して、インベントリのライセンス情報を監視およびトラッキングできます。
はじめる前にインベントリに大量のデバイスがある場合は、レポートの生成に時間がかかることがあります。
ステップ 1 | [クラスタ(Clusters)] タブで、ライセンス レポートに含める Cisco Unified Communications Manager サーバに対する [レポートに含める(Include in Report)] チェックボックスをオンにします。 |
ステップ 2 | 新しいレポートを生成する場合は [レポートの作成(Generate Report)] をクリックします。 |
次の表では、[クラスタ(Clusters)] タブの設定について説明します。
設定 |
説明 |
---|---|
追加(Add) |
新しいレコードを追加するには、[追加(Add)] をクリックします。 |
編集(Edit) |
レコードを変更するには、[編集(Edit)] をクリックします。 |
削除(Delete) |
データベースからレコードを削除するには、[削除(Delete)] をクリックします。 メッセージは、レコードを削除していることを警告します。 |
レポートの作成(Generate Report) |
ライセンス レポートを生成するには、[レポートの作成(Generate Report)] をクリックします。 |
ホスト名/IP アドレス(Hostname/IP Address) |
Unified CM サーバの IP アドレスまたはホスト名です。 |
説明(Description) |
Unified CM サーバを示す語です。 |
最新のバージョン(Version (Last Known)) |
Unified CM ソフトウェアのバージョンです。 |
前回の接続ステータス(Last Connection Status) |
Unified CM サーバ接続の状態です。 |
レポートに含める(Include in Report) |
ライセンス レポートに Unified CM サーバを含める場合は、このチェックボックスをオンにします。 |