この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
目次
IM and Presence Service と統合するように Cisco Unified Communications Manager を設定する前に、次のユーザおよびデバイス設定が Cisco Unified Communications Manager で完了していることを確認します。
(注) |
メニュー オプションおよびパラメータは、 Cisco Unified Communications Manager リリースごとに異なる可能性があるため、リリースに適用される Cisco Unified Communications Manager のマニュアルを参照してください。 |
あるプレゼンス グループのユーザが別のプレゼンス グループのユーザのアベイラビリティ情報に登録することを許可するには、プレゼンス グループ間登録パラメータを有効にします。
プレゼンス グループ間登録パラメータを有効にできるのは、デフォルトの標準プレゼンス グループまたは新しいプレゼンス グループの登録権限が [Use System Default(システム デフォルトの使用)] に設定されている場合のみです。 プレゼンス グループを設定するには、 を選択します。
Cisco Unified Communications Manager の SIP トランクを設定します。
SIP トランクに設定するポート番号は、展開する IM and Presence Service のバージョンによって異なります。 IM and Presence Service Release 9.0(x) 以降では、SIP トランクにポート番号 5060 を設定します。
ステップ 1 | を選択します。 |
ステップ 2 | [Find(検索)] をクリックします。 |
ステップ 3 | [Non Secure SIP Trunk Profile(非セキュアな SIP トランク プロファイル)] をクリックします。 |
ステップ 4 | [Copy(コピー)] をクリックして、[Name(ファイル名)] フィールドにCUP トランクを入力してください。 |
ステップ 5 | [Device Security Mode(デバイス セキュリティ モード)] の設定が [Non Secure(非セキュア)] であることを確認します。 |
ステップ 6 | [Incoming Transport Type(着信転送タイプ)] の設定が [TCP+UDP] であることを確認します。 |
ステップ 7 | [Outgoing Transport Type(発信転送タイプ)] の設定が [TCP] であることを確認します。 |
ステップ 8 | 次の項目をオンにして有効にします。 |
ステップ 9 | [Save(保存)] をクリックします。 |
Cisco Unified Communications Manager クラスタと IM and Presence サービス クラスタの間には、1 個の SIP トランクのみを設定します。 SIP トランクを設定した後、 を選択することにより、 Cisco Unified Communications Manager でその SIP トランクを IM and Presence PUBLISH トランクとして割り当てる必要があります。
[Destination Address(宛先アドレス)] フィールドで、次の形式の 1 つを使用して値を入力してください。
ハイ アベイラビリティが IM and Presence クラスタに設定されている場合、クラスタ内の複数のノードを識別するために、複数のエントリをドット付き IP アドレスまたは FQDN で入力する必要があります。 ハイ アベイラビリティを設定する場合は、DNS SRVは IM and Presence のクラスタに使用できません。
ステップ 1 | を選択します。 |
ステップ 2 | [Add New(新規追加)] をクリックします。 |
ステップ 3 | [Trunk Type(トランク タイプ)] メニューから [SIP Trunk(SIP トランク)] を選択します。 |
ステップ 4 | [Device Protocol(デバイス プロトコル)] メニューから [SIP(SIP)] を選択します。 |
ステップ 5 | [Trunk Service Type(トランク サービス タイプ)] で [None(なし)] を選択します。 |
ステップ 6 | [Next(次へ)] をクリックします。 |
ステップ 7 | [Device Name(デバイス名)] に「CUPS-SIP-Trunk」と入力します。 |
ステップ 8 | [Device Pool(デバイス プール)] メニューからデバイス プールを選択します。 |
ステップ 9 |
ウィンドウの下部にある [SIP Information(SIP 情報)] セクションで、次の値を設定します。
|
ステップ 10 |
[Save(保存)] をクリックします。 ポート番号または IP アドレスを変更することで Publish SIP trunk SRV レコードの DNS エントリを修正する場合は、そのアドレスに以前にパブリッシュしたデバイスをすべて再起動し、どのデバイスも正しい IM and Presence サービスの連絡先を指していることを確認する必要があります。 |
IM and Presence Service クラスタ外にある Cisco Unified Communications Manager から電話利用状況を許可できます。 クラスタ外にある Cisco Unified Communications Manager からのデフォルトの要求は、IM and Presence Service では受け付けられません。 また、Cisco Unified Communications Manager の SIP トランクも設定できます。
TLS ピア サブジェクトを設定する前に、TLS コンテキストを設定する必要があります。
IM and Presence Service がクラスタ外の Cisco Unified Communications Manager から SIP PUBLISH を受け入れるようにするには、Cisco Unified Communications Manager は、IM and Presence Service の TLS 信頼ピアとしてリストする必要があります。
ステップ 1 | を選択します。 |
ステップ 2 | [Add New(新規追加)] をクリックします。 |
ステップ 3 | [Peer Subject Name(ピア サブジェクト名)] フィールドに外部 Cisco Unified Communications Manager の IP アドレスを入力します。 |
ステップ 4 | [Description(説明)] フィールドにノードの名前を入力します。 |
ステップ 5 | [Save(保存)] をクリックします。 |
TLS コンテキストを設定します。
TLS コンテキストを設定するには、次の手順を使用します。
TLS ピア サブジェクトを設定します。
ステップ 1 | [Cisco Unified CM IM and Presence Administration(Cisco Unified CM IM and Presence の管理)] > [System(システム)] > [Security(セキュリティ)] > [TLS Context Configuration(TLS コンテキストの設定)] を選択します。 | ||
ステップ 2 | [Find(検索)] をクリックします。 | ||
ステップ 3 | [Default_Cisco_UP_SIP_Proxy_Peer_Auth_TLS_Context] をクリックします。 | ||
ステップ 4 | 使用可能な TLS ピア サブジェクトのリストから、設定した TLS ピア サブジェクトを選択します。 | ||
ステップ 5 | この TLS ピア サブジェクトを [Selected TLS Peer Subjects] に移動します。 | ||
ステップ 6 | [Save(保存)] をクリックします。 | ||
ステップ 7 | OAMAgent を再起動します。 | ||
ステップ 8 |
Cisco Presence Engine を再起動します。
|
Cisco Unified Communications Manager サービスは、Cisco Unified Communications Manager ノード、または IM and Presence Service ノードから表示、起動、停止できます。 次の手順には、Cisco Unified Communications Manager ノードで従う手順が示されています。 Cisco Unified Communications Manager サービスを IM and Presence Service ノードから表示するには、 を選択します。
ステップ 1 | Cisco Unified Communications Manager で、 を選択します。 |
ステップ 2 | [Server(サーバ)] メニューから [Cisco Unified Communications Manager] ノードを選択します。 |
ステップ 3 | 次のサービスが実行されていることを確認します。 |
目次
- IM and Presence Service と統合するための Cisco Unified Communications Manager の設定
- 統合前の Cisco Unified Communications Manager のユーザおよびデバイス設定のタスク リスト
- プレゼンス グループ間登録パラメータの設定
- Cisco Unified Communications Manager の SIP トランク設定
- IM and Presence サービスの SIP トランク セキュリティ プロファイルの設定
- IM and Presence サービスの SIP トランクの設定
- クラスタ外の Unified Communications Manager の電話利用状況の設定
- TLS ピア サブジェクトの設定
- TLS コンテキストの設定
- 必要なサービスが Cisco Unified Communications Manager で実行されていることの確認
- 統合前の Cisco Unified Communications Manager のユーザおよびデバイス設定のタスク リスト
- プレゼンス グループ間登録パラメータの設定
- Cisco Unified Communications Manager の SIP トランク設定
- 必要なサービスが Cisco Unified Communications Manager で実行されていることの確認
統合前の Cisco Unified Communications Manager のユーザおよびデバイス設定のタスク リスト
IM and Presence Service と統合するように Cisco Unified Communications Manager を設定する前に、次のユーザおよびデバイス設定が Cisco Unified Communications Manager で完了していることを確認します。
表 1 IM and Presence Service と統合する前に、Cisco Unified Communications Manager のユーザとデバイスを設定するためのタスク リスト この手順は、 Cisco Unified Communications Manager Release 6.0 以降と統合する場合にだけ適用されます。
ユーザのクレデンシャル ポリシーの有効期限を設定することを推奨します。 クレデンシャル ポリシーの有効期限を必要としない唯一のユーザ タイプは、アプリケーション ユーザです。
Cisco Unified Communications Manager は、 Cisco Unified Communications Manager のユーザを認証するために LDAP サーバを使用している場合はクレデンシャル ポリシーを使用しません。
[Allow Control of Device from CTI(CTI からデバイスを制御可能)] チェックボックスをオンにして、電話が クライアントと相互運用できるようにします。
ユーザ ID 値が各ユーザで一意になっていることを確認します。
この手順は、 Cisco Unified Communications Manager Release 6.0 以降だけに適用されます。
デスクフォン制御を有効にするには、CTI 対応ユーザ グループにユーザを追加する必要があります。
(任意)ユーザの directoryURI 値を設定する
IM and Presence Service ノードが Directories URI IM アドレス スキームを使用している場合は、ユーザの directoryURI 値を設定する必要があります。 ユーザのディレクトリ URI 値は、Cisco Unified Communications Manager LDAP ディレクトリに同期化するか、または手動で更新できます。
LDAP が有効になっていない場合に LDAP を有効にする、またはユーザのディレクトリ URI 値を手動で編集する手順については、『Cisco Unified Communications Manager Administration Guide(Cisco Unified Communications Manager 管理ガイド)』を参照してください。
(注)
メニュー オプションおよびパラメータは、 Cisco Unified Communications Manager リリースごとに異なる可能性があるため、リリースに適用される Cisco Unified Communications Manager のマニュアルを参照してください。
関連情報
プレゼンス グループ間登録パラメータの設定
手順あるプレゼンス グループのユーザが別のプレゼンス グループのユーザのアベイラビリティ情報に登録することを許可するには、プレゼンス グループ間登録パラメータを有効にします。
プレゼンス グループ間登録パラメータを有効にできるのは、デフォルトの標準プレゼンス グループまたは新しいプレゼンス グループの登録権限が [Use System Default(システム デフォルトの使用)] に設定されている場合のみです。 プレゼンス グループを設定するには、 を選択します。
ステップ 1 を選択します。 ステップ 2 [Server(サーバ)] メニューから [Cisco Unified Communications Manager] ノードを選択します。 ステップ 3 [Service(サービス)] メニューから [Cisco CallManager] を選択します。 ステップ 4 [Clusterwide Parameters (System - Presence)(クラスタ全体のパラメータ(システム - プレゼンス))] セクションでデフォルトのプレゼンス グループ間登録に対して [Allow Subscription(登録の許可)] を選択します。 ステップ 5 [Save(保存)] をクリックします。
ヒント
次の作業Cisco Unified Communications Manager の SIP トランクを設定します。
Cisco Unified Communications Manager の SIP トランク設定
SIP トランクに設定するポート番号は、展開する IM and Presence Service のバージョンによって異なります。 IM and Presence Service Release 9.0(x) 以降では、SIP トランクにポート番号 5060 を設定します。
- IM and Presence サービスの SIP トランク セキュリティ プロファイルの設定
- IM and Presence サービスの SIP トランクの設定
- クラスタ外の Unified Communications Manager の電話利用状況の設定
IM and Presence サービスの SIP トランク セキュリティ プロファイルの設定
手順
ステップ 1 を選択します。 ステップ 2 [Find(検索)] をクリックします。 ステップ 3 [Non Secure SIP Trunk Profile(非セキュアな SIP トランク プロファイル)] をクリックします。 ステップ 4 [Copy(コピー)] をクリックして、[Name(ファイル名)] フィールドにCUP トランクを入力してください。 ステップ 5 [Device Security Mode(デバイス セキュリティ モード)] の設定が [Non Secure(非セキュア)] であることを確認します。 ステップ 6 [Incoming Transport Type(着信転送タイプ)] の設定が [TCP+UDP] であることを確認します。 ステップ 7 [Outgoing Transport Type(発信転送タイプ)] の設定が [TCP] であることを確認します。 ステップ 8 次の項目をオンにして有効にします。 ステップ 9 [Save(保存)] をクリックします。
次の作業
IM and Presence サービスの SIP トランクの設定
手順Cisco Unified Communications Manager クラスタと IM and Presence サービス クラスタの間には、1 個の SIP トランクのみを設定します。 SIP トランクを設定した後、 を選択することにより、 Cisco Unified Communications Manager でその SIP トランクを IM and Presence PUBLISH トランクとして割り当てる必要があります。
[Destination Address(宛先アドレス)] フィールドで、次の形式の 1 つを使用して値を入力してください。
ハイ アベイラビリティが IM and Presence クラスタに設定されている場合、クラスタ内の複数のノードを識別するために、複数のエントリをドット付き IP アドレスまたは FQDN で入力する必要があります。 ハイ アベイラビリティを設定する場合は、DNS SRVは IM and Presence のクラスタに使用できません。
ステップ 1 を選択します。 ステップ 2 [Add New(新規追加)] をクリックします。 ステップ 3 [Trunk Type(トランク タイプ)] メニューから [SIP Trunk(SIP トランク)] を選択します。 ステップ 4 [Device Protocol(デバイス プロトコル)] メニューから [SIP(SIP)] を選択します。 ステップ 5 [Trunk Service Type(トランク サービス タイプ)] で [None(なし)] を選択します。 ステップ 6 [Next(次へ)] をクリックします。 ステップ 7 [Device Name(デバイス名)] に「CUPS-SIP-Trunk」と入力します。 ステップ 8 [Device Pool(デバイス プール)] メニューからデバイス プールを選択します。 ステップ 9 ウィンドウの下部にある [SIP Information(SIP 情報)] セクションで、次の値を設定します。
ステップ 10 [Save(保存)] をクリックします。 ポート番号または IP アドレスを変更することで Publish SIP trunk SRV レコードの DNS エントリを修正する場合は、そのアドレスに以前にパブリッシュしたデバイスをすべて再起動し、どのデバイスも正しい IM and Presence サービスの連絡先を指していることを確認する必要があります。
関連タスク
関連資料
クラスタ外の Unified Communications Manager の電話利用状況の設定
TLS ピア サブジェクトの設定
手順IM and Presence Service がクラスタ外の Cisco Unified Communications Manager から SIP PUBLISH を受け入れるようにするには、Cisco Unified Communications Manager は、IM and Presence Service の TLS 信頼ピアとしてリストする必要があります。
ステップ 1 を選択します。 ステップ 2 [Add New(新規追加)] をクリックします。 ステップ 3 [Peer Subject Name(ピア サブジェクト名)] フィールドに外部 Cisco Unified Communications Manager の IP アドレスを入力します。 ステップ 4 [Description(説明)] フィールドにノードの名前を入力します。 ステップ 5 [Save(保存)] をクリックします。
次の作業
TLS コンテキストを設定します。
TLS コンテキストの設定
手順
ステップ 1 [Cisco Unified CM IM and Presence Administration(Cisco Unified CM IM and Presence の管理)] > [System(システム)] > [Security(セキュリティ)] > [TLS Context Configuration(TLS コンテキストの設定)] を選択します。 ステップ 2 [Find(検索)] をクリックします。 ステップ 3 [Default_Cisco_UP_SIP_Proxy_Peer_Auth_TLS_Context] をクリックします。 ステップ 4 使用可能な TLS ピア サブジェクトのリストから、設定した TLS ピア サブジェクトを選択します。 ステップ 5 この TLS ピア サブジェクトを [Selected TLS Peer Subjects] に移動します。 ステップ 6 [Save(保存)] をクリックします。 ステップ 7 OAMAgent を再起動します。 ステップ 8 Cisco Presence Engine を再起動します。
ヒント 次の順序で再起動し、変更を有効にします。
必要なサービスが Cisco Unified Communications Manager で実行されていることの確認
手順Cisco Unified Communications Manager サービスは、Cisco Unified Communications Manager ノード、または IM and Presence Service ノードから表示、起動、停止できます。 次の手順には、Cisco Unified Communications Manager ノードで従う手順が示されています。 Cisco Unified Communications Manager サービスを IM and Presence Service ノードから表示するには、 を選択します。
ステップ 1 Cisco Unified Communications Manager で、 を選択します。 ステップ 2 [Server(サーバ)] メニューから [Cisco Unified Communications Manager] ノードを選択します。 ステップ 3 次のサービスが実行されていることを確認します。