この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
目次
ここでは、IM and Presence Service クラスタ間でユーザを移行する方法について説明します。 次の手順を記述されている順に完了する必要があります。
現在のクラスタから移行ユーザの割り当てを解除します。
現在のホーム クラスタから移行ユーザの連絡先リストをエクスポートします。
Cisco Unified Communications Manager から現在のホーム クラスタの IM and Presence Service および Cisco Jabber の移行ユーザを無効にします。
LDAP 同期が Cisco Unified Communications Manager で有効になっている場合:
LDAP 同期が Cisco Unified Communications Manager で有効になっていない場合は、手動で Cisco Unified Communications Manager の移行ユーザをプロビジョニングします。
IM and Presence Service および Cisco Jabber のユーザを有効にします。
移行されたユーザの連絡先リストのデータを復元するために、新しいホーム クラスタに連絡先リストをインポートします。
以下のタスクを実行します。
現在のクラスタおよび新しいホーム クラスタの完全な DRS を実行します。 詳細については、『Disaster Recovery System Administration Guide』を参照してください。
次のサービスが実行されていることを確認します。
トラブルシュータを実行し、Intercluster Sync Agent の問題が報告されないことを確認します。 この手順を続行する前に、トラブルシュータで報告されたすべての Intercluster Sync Agent の問題を解決する必要があります。
[Allow users to view the availability of other users without being prompted for approval (確認プロンプトなしで、ユーザが他のユーザのプレゼンス ステータスを表示できるようにする)] 設定を有効にすることを推奨します。 この設定を有効にするには、 を選択します。 この設定の変更には、Cisco XCP Router を再起動する必要があります。
次の設定を [No Limit(無制限)] に設定することを推奨します。
移行されるユーザに現在の(移行前)ホーム クラスタ上の Cisco Unified Presence または Cisco Jabber のライセンスが供与されていることを確認します。 これらのユーザに他のクラスタでライセンスが供与されている場合、次の手順に進む前に完全ライセンスが供与されている必要はありません。
現在のクラスタから移行ユーザの割り当てを解除するには、次の手順を実行します。
ステップ 1 | を選択します。 |
ステップ 2 | リモート IM and Presence クラスタに移行するユーザを選択します。 |
ステップ 3 | [Assign Selected Users(選択されたユーザの割り当て)] を選択し、次のダイアログボックスで [Unassigned(未割り当て)] を選択します。 |
ステップ 4 | [Save(保存)] をクリックします。 |
ユーザ連絡先リストのエクスポートに進みます。
現在のクラスタから移行の連絡先リストをエクスポートするには、次の手順を実行します。
ステップ 1 | 現在のホーム クラスタから移行ユーザの連絡先リストをエクスポートします。 |
ステップ 2 | 連絡先リストのエクスポート ジョブのステータスをモニタします。 |
ステップ 3 | 後でユーザの移行が完了したときに使用できるように、連絡先リストのエクスポート ファイルをダウンロードし、保存します。 |
ユーザを非ライセンスに設定します。
次の手順では、現在のホーム クラスタの IM and Presence Service および Cisco Jabber の移行ユーザを無効にする方法について説明します。
ユーザを一括更新する方法については、『Cisco Unified Communications Manager Bulk Administration Guide(Cisco Unified Communications Manager 一括管理ガイド)』を参照してください。
新しいクラスタにユーザを移動する手順は、LDAP 同期が Cisco Unified Communications Manager で有効になっているかどうかによって異なります。
LDAP 同期が Cisco Unified Communications Manager で有効になっている場合は、新しい組織ユニットにユーザを移動し、新しいホーム クラスタにユーザを同期する必要があります。
LDAP 同期が Cisco Unified Communications Manager で有効になっている場合は、展開でクラスタごとに異なる LDAP 構造が使用されるときに(OU 分割)、新しいクラスタの同期元となる新しい組織ユニット(OU)にユーザを移動する必要があります。この場合、ユーザは LDAP からそのホーム クラスタにのみ同期されます。
(注) |
展開でフラットな LDAP 構造を使用する場合、つまり、すべてのユーザがすべての Cisco Unified Communications Manager および IM and Presence サービス クラスタに同期され、ユーザが 1 つのクラスタにのみライセンスされている場合は、ユーザを移動する必要はありません。 |
新しいホーム クラスタの関連する OU に移行ユーザを移動する方法の詳細については、LDAP 管理マニュアルを参照してください。
ユーザの移動後、古い LDAP のクラスタから LDAP エントリを削除する必要があります。
新しいホーム クラスタへのユーザの同期に進みます。
LDAP が Cisco Unified Communications Manager になっている場合、新しいホーム Cisco Unified Communications Manager クラスタにユーザを同期する必要があります。 Cisco Unified Communications Manager でこれを手動で同期するか、Cisco Unified Communications Manager でスケジュールされた同期化が行われるまで待機できます。
Cisco Unified Communications Manager で、同期を手動で強制するには、次の手順を実行します。
ステップ 1 | Cisco Unified CM の管理で、 を選択します。 |
ステップ 2 | [Perform Full Sync Now(完全同期を今すぐ実施)] をクリックします。 |
IM and Presence サービスのユーザを有効にし、新しいクラスタのユーザにライセンスを供与する手順に進みます。
LDAP 同期が Cisco Unified Communications Manager で有効になっていない場合、新しい Cisco Unified Communications Manager クラスタでユーザを手動でプロビジョニングする必要があります。 詳細については、『Cisco Unified Communications Manager Administration Guide』を参照してください。
新しいホーム クラスタでユーザが同期されている場合、または手動でプロビジョニングされている場合は、手動で IM and Presence サービスおよび Cisco Jabber のユーザを有効にする必要があります。
ユーザを一括更新する方法については、『Cisco Unified Communications Manager Bulk Administration Guide』を参照してください。
次の作業
新しいホーム クラスタの連絡先リストのインポートに進みます。
移行されたユーザの連絡先データを復元するには、連絡先リストをインポートする必要があります。
目次
- ユーザの移行
- IM and Presence Service クラスタ間のユーザの移行
- 現在のクラスタからのユーザ割り当ての解除
- ユーザ連絡先リストのエクスポート
- IM and Presence Service のユーザの無効化
- 新しいクラスタへのユーザの移動
- Cisco Unified Communications Manager で有効な LDAP 同期
- 新しい組織ユニットへのユーザの移動
- 新しいホーム クラスタへのユーザの同期
- Cisco Unified Communications Manager で有効ではない LDAP 同期
- 新しいクラスタの IM and Presence サービスのユーザの有効化
- ホーム クラスタでの連絡先リストのインポート
IM and Presence Service クラスタ間のユーザの移行
ここでは、IM and Presence Service クラスタ間でユーザを移行する方法について説明します。 次の手順を記述されている順に完了する必要があります。
現在のクラスタから移行ユーザの割り当てを解除します。
現在のホーム クラスタから移行ユーザの連絡先リストをエクスポートします。
Cisco Unified Communications Manager から現在のホーム クラスタの IM and Presence Service および Cisco Jabber の移行ユーザを無効にします。
LDAP 同期が Cisco Unified Communications Manager で有効になっている場合:
LDAP 同期が Cisco Unified Communications Manager で有効になっていない場合は、手動で Cisco Unified Communications Manager の移行ユーザをプロビジョニングします。
IM and Presence Service および Cisco Jabber のユーザを有効にします。
移行されたユーザの連絡先リストのデータを復元するために、新しいホーム クラスタに連絡先リストをインポートします。
はじめる前に
以下のタスクを実行します。
現在のクラスタおよび新しいホーム クラスタの完全な DRS を実行します。 詳細については、『Disaster Recovery System Administration Guide』を参照してください。
次のサービスが実行されていることを確認します。
トラブルシュータを実行し、Intercluster Sync Agent の問題が報告されないことを確認します。 この手順を続行する前に、トラブルシュータで報告されたすべての Intercluster Sync Agent の問題を解決する必要があります。
[Allow users to view the availability of other users without being prompted for approval (確認プロンプトなしで、ユーザが他のユーザのプレゼンス ステータスを表示できるようにする)] 設定を有効にすることを推奨します。 この設定を有効にするには、 を選択します。 この設定の変更には、Cisco XCP Router を再起動する必要があります。
次の設定を [No Limit(無制限)] に設定することを推奨します。
移行されるユーザに現在の(移行前)ホーム クラスタ上の Cisco Unified Presence または Cisco Jabber のライセンスが供与されていることを確認します。 これらのユーザに他のクラスタでライセンスが供与されている場合、次の手順に進む前に完全ライセンスが供与されている必要はありません。
- 現在のクラスタからのユーザ割り当ての解除
- ユーザ連絡先リストのエクスポート
- IM and Presence Service のユーザの無効化
- 新しいクラスタへのユーザの移動
- 新しいクラスタの IM and Presence サービスのユーザの有効化
- ホーム クラスタでの連絡先リストのインポート
ユーザ連絡先リストのエクスポート
IM and Presence Service のユーザの無効化
手順次の手順では、現在のホーム クラスタの IM and Presence Service および Cisco Jabber の移行ユーザを無効にする方法について説明します。
ユーザを一括更新する方法については、『Cisco Unified Communications Manager Bulk Administration Guide(Cisco Unified Communications Manager 一括管理ガイド)』を参照してください。
新しいクラスタへのユーザの移動
- Cisco Unified Communications Manager で有効な LDAP 同期
- Cisco Unified Communications Manager で有効ではない LDAP 同期
Cisco Unified Communications Manager で有効な LDAP 同期
新しい組織ユニットへのユーザの移動
次の作業LDAP 同期が Cisco Unified Communications Manager で有効になっている場合は、展開でクラスタごとに異なる LDAP 構造が使用されるときに(OU 分割)、新しいクラスタの同期元となる新しい組織ユニット(OU)にユーザを移動する必要があります。この場合、ユーザは LDAP からそのホーム クラスタにのみ同期されます。
(注)
展開でフラットな LDAP 構造を使用する場合、つまり、すべてのユーザがすべての Cisco Unified Communications Manager および IM and Presence サービス クラスタに同期され、ユーザが 1 つのクラスタにのみライセンスされている場合は、ユーザを移動する必要はありません。
新しいホーム クラスタの関連する OU に移行ユーザを移動する方法の詳細については、LDAP 管理マニュアルを参照してください。
ユーザの移動後、古い LDAP のクラスタから LDAP エントリを削除する必要があります。
新しいホーム クラスタへのユーザの同期に進みます。
新しいホーム クラスタへのユーザの同期
手順LDAP が Cisco Unified Communications Manager になっている場合、新しいホーム Cisco Unified Communications Manager クラスタにユーザを同期する必要があります。 Cisco Unified Communications Manager でこれを手動で同期するか、Cisco Unified Communications Manager でスケジュールされた同期化が行われるまで待機できます。
Cisco Unified Communications Manager で、同期を手動で強制するには、次の手順を実行します。
ステップ 1 Cisco Unified CM の管理で、 を選択します。 ステップ 2 [Perform Full Sync Now(完全同期を今すぐ実施)] をクリックします。
次の作業
IM and Presence サービスのユーザを有効にし、新しいクラスタのユーザにライセンスを供与する手順に進みます。
新しいクラスタの IM and Presence サービスのユーザの有効化
手順新しいホーム クラスタでユーザが同期されている場合、または手動でプロビジョニングされている場合は、手動で IM and Presence サービスおよび Cisco Jabber のユーザを有効にする必要があります。
ユーザを一括更新する方法については、『Cisco Unified Communications Manager Bulk Administration Guide』を参照してください。
次の作業
新しいホーム クラスタの連絡先リストのインポートに進みます。
ホーム クラスタでの連絡先リストのインポート
手順