Hybrid Media Service の導入タスク フロー
始める前に
手順
コマンドまたはアクション | 目的 | |
---|---|---|
ステップ 1 |
VMware ESXi を実行しているホスト サーバにハイブリッド メディア ノードを導入するには、この手順を使用します。ノードを作成するオンプレミス ソフトウェアをインストールします。後でノードをクラウドに登録します。 |
|
ステップ 2 |
初めてコンソールにサインインします。ハイブリッド メディア ノード ソフトウェアには、デフォルトのパスワードが設定されています。ノードを設定する前に、この値を変更する必要があります。 |
|
ステップ 3 |
ハイブリッド メディア ノードのネットワークを設定するには、この手順を使用します。必要な場合は、静的 IP アドレスを設定し、ホスト名と NTP サーバを変更します。現時点では、DHCP はサポートされていません。 |
|
ステップ 4 |
ハイブリッド メディア ノードを Cisco Collaboration Cloud に登録するには、この手順を使用します。Cisco Spark Control Hub を使用してノードを登録する場合は、ノードの割り当て先となるクラスタを作成します。クラスタには、特定地域のユーザにサービスを提供する 1 つまたは複数のメディア ノードが含まれています。 |
|
ステップ 5 |
ハイブリッド メディア ノードでホストされるミーティングでは、参加者全員が企業ネットワーク内に存在し、高画質対応のデバイスを使用している場合、1080p、30 fps の高画質ビデオを利用できます。この設定は、ハイブリッド メディア ノードを含むすべてのクラスタに適用されます。 |
|
ステップ 6 |
必要に応じて、以下の設定を行います。 |
SIP デバイスは、直接的な到達可能性をサポートしていません。そのため、Unified CM または Expressway の設定を使用して、オンプレミスの SIP デバイスと Hybrid Media Service クラスタ間の関係を確立する必要があります。 |
ステップ 7 |
Cisco WebEx Meeting Center ビデオ ミーティングに対してメディアの最適化を有効にするには、この手順に従います。 |
|
ステップ 8 |