自動代替ルーティングの概要
場所の帯域幅不足のためシステムがコールをブロックする場合、PSTN またはその他のネットワークを通じてコールを自動的に再ルーティングするように自動代替ルーティング(AAR)を設定します。自動代替ルーティングにより、発信者が電話を切ってから着信側をリダイヤルする必要がなくなります。
この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
場所の帯域幅不足のためシステムがコールをブロックする場合、PSTN またはその他のネットワークを通じてコールを自動的に再ルーティングするように自動代替ルーティング(AAR)を設定します。自動代替ルーティングにより、発信者が電話を切ってから着信側をリダイヤルする必要がなくなります。
コマンドまたはアクション | 目的 | |
---|---|---|
ステップ 1 |
クラスタの自動代替ルーティングを有効にします。 |
|
ステップ 2 |
自動代替ルーティング(AAR)は、その場所の帯域幅が不十分であることが原因で Cisco Unified Communications Manager がコールをブロックした場合、代替番号を使用して PSTN またはその他のネットワークを通じてコールを再ルーティングするメカニズムを提供します。 |
クラスタに対して自動代替ルーティング(AAR)を有効化します。
ステップ 1 |
Cisco Unified CM Administration から、 を選択します。 |
ステップ 2 |
[サーバ(Server)] ドロップダウン リストでノードを選択します。 |
ステップ 3 |
[サービス(Service)] ドロップダウン リストから、[Cisco Call Manager] を選択します。 |
ステップ 4 |
[クラスタ全体のパラメータ(システム - CCM 自動代替ルーティング)(Clusterwide Parameters (System - CCM Automated Alternate Routing))] 領域で、[自動代替ルーティングの有効化(Automated Alternate Routing Enable)] パラメータを [True] に設定します。 |
自動代替ルーティング(AAR)を設定することで、ロケーションの帯域幅不足のためシステムがコールをブロックしたときに、PSTN またはその他のネットワークを通じてコールを自動的に再ルーティングすることができます。AAR を使用すると、発信者は電話を切って着信側をダイヤルし直す必要がなくなります。
ステップ 1 |
Cisco Unified CM Administration から、 を選択します。 |
||
ステップ 2 |
次のいずれかのオプションを選択します。
|
||
ステップ 3 |
[名前(Name)] フィールドに、新しい AAR グループに割り当てる名前を入力します。 この名前には、最長 20 文字の英数字を指定でき、スペース、ピリオド(.)、ハイフン(-)、および下線文字(_)を任意に組み合わせることが可能です。 |
||
ステップ 4 |
[AAR グループの設定(AAR Group Configuration)] ウィンドウの各フィールドを設定します。フィールドと設定オプションの詳細については、システムのオンライン ヘルプを参照してください。 |
||
ステップ 5 |
[保存((Save)] をクリックします。
|