H.323 トランクの概要
H.323 を導入している場合は、H.323 トランクがリモート クラスタと、ゲートウェイなどのその他の H.323 デバイスに接続を提供します。H.323 トランクは、Unified Communications Manager がクラスタ内通信でサポートするオーディオ コーデックおよびビデオ コーデックのほとんどをサポートします。ただし、広帯域オーディオおよび広帯域ビデオについてはサポートしません。H.323 トランクは、コール制御シグナリング用に H.225 プロトコルを使用し、メディア シグナリング用に H.245 プロトコルを使用します。
Cisco Unified CM Administration で、クラスタ間トランク(ゲートキーパー非制御)トランク タイプとプロトコル オプションを使用して H.323 トランクを設定できます。
非ゲートキーパー H.323 導入環境の場合は、Unified Communications Manager が IP WAN 経由でコールできるように、リモート クラスタ内の各デバイス プールに個別のクラスタ間トランクを設定する必要があります。クラスタ間トランクは、リモート デバイスの IPv4 アドレスまたはホスト名を静的に指定します。
単一のトランクには最大 16 件の宛先アドレスを設定できます。
クラスタ間トランク
2 つのリモート クラスタ間にクラスタ間トランク接続を設定する場合は、一方のトランクが使用する宛先アドレスがリモート クラスタのトランクが使用するコール処理ノードと一致するように、クラスタごとにクラスタ間トランクを設定し、トランク設定を一致させる必要があります。次に例を示します。
-
リモート クラスタ トランクが [すべてのアクティブ ノードで実行(Run on all Active Nodes)] を使用する:リモート クラスタ トランクは、コール処理とロード バランシングにすべてのノードを使用します。ローカル クラスタ内から始まるローカル クラスタ間トランクでは、リモート クラスタ内の各サーバの IP アドレスまたはホスト名を追加します。
-
リモート クラスタで [すべてのアクティブノードで実行(Run on all Active Nodes)] を使用しない:リモート クラスタ トランクは、コール処理およびロード バランシング用にトランクのデバイス プールに割り当てられた Unified Communications Manager グループのサーバを使用します。ローカルのクラスタ間トランク設定では、リモート クラスタ トランクのデバイス プールで使用される Unified Communications Manager グループから各ノードの IP アドレスまたはホスト名を追加する必要があります。
セキュアなトランク
H.323 トランクのセキュアなシグナリングを設定するには、トランクに IPSec を設定する必要があります。詳細については、『Cisco Unified Communications Manager セキュリティ ガイド』を参照してください。メディア暗号化を許可するようにトランクを設定するには、[トランクの設定(Trunk Configuration)] ウィンドウで [SRTP を許可する(SRTP allowed)] チェックボックスをオンにします。
(注) |
ゲートキーパーは今では広く使用されていませんが、ゲートキーパー制御のトランクを使用するように H.323 導入を設定することもできます。ゲートキーパーが制御するトランクを設定する方法の詳細については、『Cisco Unified Communications Manager アドミニストレーション ガイド リリース 10.0(1)』を参照してください。 |