この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
このコマンドは、システム監査サービスを開始および停止します。また、システム監査サービスのステータスを表示します。
utils auditd { enable | disable | status }
パラメータ | 説明 |
---|---|
enable |
監査ログの収集をイネーブルにします。イネーブルにすると、システムはユーザのアクションを監視および記録します。また、ユーザの作成や削除などの Linux イベントや、ファイルの編集および削除も監視および記録します。 |
disable |
監査ログの収集をディセーブルにします。 |
status |
監査ログの収集のステータスを表示します。監査ログの取得には Real-Time Monitoring Tool の使用をお勧めします。ただし、CLI を使用して監査ログを取得することもできます。 |
管理者(admin:)
サービスがイネーブルになっていると、システム アクティビティをモニタし、ログに記録します。システム監査サービスは、多くの情報をログに記録することに注意してください。ディスクが一杯にならないように注意してください
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection。
utils Branding*
このノードでブランディングを有効にするには、このコマンドを実行します。
管理者(admin:)
コマンド特権レベル:4
適用対象:Cisco Unfiied Communications Manager、IM and Presence サービス
このノードでブランディングを無効にするには、このコマンドを実行します。
管理者(admin:)
コマンド特権レベル:4
適用対象:Cisco Unfiied Communications Manager、IM and Presence サービス
このコマンドを実行すると、このノードでブランディングが有効か無効かを確認できます。
管理者(admin:)
コマンド特権レベル:4
適用対象:Cisco Unfiied Communications Manager、IM and Presence サービス
utils contactsearchauthentication*
このコマンドは、安全な連絡先検索認証モードを無効にします。このモードを無効にしたら、変更を有効にする電話をリセットする必要があります。
utils contactsearchauthentication disable
管理者(admin:)
コマンド特権レベル:4
アップグレード時の使用:不可
Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このコマンドは、安全な連絡先検索認証モードを有効にします。このモードを有効にしたら、変更を有効にする電話をリセットします。
utils contactsearchauthentication enable
管理者(admin:)
コマンド特権レベル:4
アップグレード時の使用:不可
Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このコマンドは、システムが連絡先検索認証モードが有効または無効のいずれの状態で動作しているかを表示します。
utils contactsearchauthentication status
管理者(admin:)
コマンド特権レベル:0
アップグレード時の使用:可能
Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
utils core*
このコマンドは、コア ファイルのバックトレース、スレッド リスト、すべての CPU レジスタの現在の値を生成します。
utils core { active | inactive } analyze [core_filename]
パラメータ | 説明 |
---|---|
active |
アクティブなバージョンを指定します。 |
inactive |
非アクティブなバージョンを指定します。 |
core_filename |
スタック トレースが生成されるコア ファイルの名前を指定します。 |
管理者(admin:)
このコマンドにより、コア ファイルと同じ名前で、拡張子が .txt のファイルが、コア ファイルと同じディレクトリに作成されます。cimserver によって作成されたコア ファイルでこのコマンドを実行すると、予期しないメッセージが表示されます。このメッセージは既知の制限です。
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection。
このコマンドは、すべてのアクティブまたは非アクティブなコア ファイルを表示します。
utils core { active | inactive } list
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection。
utils capf*
utils capf cert import
システムにサインインした電話の証明書をアップロードするには、このコマンドを使用します。
FTP または TFTP を使用して署名付き証明書をインポートすることを選択することもできます。
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager
utils capf csr { dump | count | delete }
このコマンドは、システムでサードパーティの CA 署名付き証明書を管理するのに役立ちます。
パラメータ | 説明 |
---|---|
count | システムに使用可能な証明書と CSR の数を表示します。 |
delete | システムのすべての証明書と CSR を削除します。 |
dump | すべての CSR が CA によってサインインされると、このパラメータでローカル サーバにダウンロードします。 |
このコマンド セットを使用する方法については、http://www.cisco.com/c/en/us/support/unified-communications/unified-communications-manager-callmanager/products-maintenance-guides-list.html で『Cisco Unified Communications Manager Security Guide』の「"Generate and Import Third Party CA-Signed LSCs"」の手順を参照してください。
コマンド特権レベル:count パラメータの場合は 0、delete および dump パラメータの場合は 1。
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager
このコマンドは、サーバに関するレポートを platform/log ディレクトリ内に作成します。
utils create report { hardware | platform | security }
パラメータ | 説明 |
---|---|
hardware |
ディスク アレイ、リモート コンソール、診断、および環境のデータを含むシステム レポートを作成します。 |
platform |
プラットフォーム コンフィギュレーション ファイルが TAR ファイルに収集されます。 |
security |
診断レポートを収集し、TAR ファイルを作成します。TAR ファイルは、トラブルシューティングを行う場合にダウンロードできます。このファイルは、file get コマンドを使用して取得できます。 |
管理者(admin:)
コマンドを入力すると、続行を求めるプロンプトが表示されます。
レポートを作成した後、file get activelog platform/log/filename コマンドを使用してレポートを取得します。filename は、コマンドが完了した後で表示されるレポートのファイル名を指定します。
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection。
このコマンドは、データベースのトラブルシューティングに必要なすべてのログ ファイルを収集します。
utils create report { hardware | platform | security }
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
utils ctl { set-cluster mixed-mode | set-cluster non-secure-mode | update CTLFile }
このコマンドは、クラスタ セキュリティ モードを変更するか、各ノードで CTL ファイルを更新します。
パラメータ | 説明 | ||
---|---|---|---|
set-cluster mixed-mode |
CTL ファイルを更新し、クラスタを混合モードに設定します(DB セキュア モードが 1 に設定されます)。 クラスタですでに混合モードが有効になっている場合、このコマンドは、Unified Communications Manager が混合モードであり、自動登録がアクティブであることを示します。操作を確認する必要があります。
|
||
set-cluster non-secure-mode |
CTL ファイルを更新し、クラスタを非セキュア モードに設定します。 クラスタですでに混合モードが有効になっている場合、このコマンドは、Unified Communications Manager が非セキュア モードであることを示します。 |
||
update CTLFile |
クラスタの各ノードで、CTL ファイルを更新します。
|
管理者(admin:)
この CLI は、パブリッシャで実行する必要があります。他のすべてのノードでは、この CLI コマンドがディセーブルにされています。
(注) | CTL ファイルの再生成後、クラスタ全体で CallManager および TFTP サービスを再起動する必要があります。 |
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager
このコマンドは CTL ファイルの再生成に使用され、セカンダリ SAST ロール(ITLRecovery)でそれを署名します。元の CTL ファイルに署名するために使用された CallManager 証明書が変更され、エンドポイントがロック アウトされた場合にこのコマンドを使用します。
utils ctl reset { localkey }
localkey |
パブリッシャの CTL ファイルを更新して、新しい CTL ファイルを生成します。コマンドは ITLRecovery キーで CTLfile に署名します。 |
管理者(admin:)
コマンド特権レベル:4
アップグレード時の使用:不可
適用対象:Unified Communications Manager
utils cuc*
このコマンドは、スタンドアロン Cisco Unity Connection サーバを Cisco Unity Connection SRSV サーバに変換します。
utils cuc activate CUSRSV
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unity Connectionこのコマンドは、このサーバを Cisco Unity Connection クラスタ内でアクティブにします。
utils cuc cluster activate
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unity Connectionこのコマンドは、このサーバを Cisco Unity Connection クラスタ内で非アクティブにします。
utils cuc cluster deactivate
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unity Connectionutils cuc cluster makeprimary
パラメータ | 説明 |
---|---|
server | Cisco Unity Connection クラスタ内でプライマリ サーバ ステータスを取得するサーバの名前を指定します。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unity Connectionutils cuc cluster overwritedb
管理者(admin:)
このコマンドは、このコマンドを実行するサーバ上のデータベースを、Connection クラスタ内の他のサーバにあるデータベースで上書きします。データベースが上書きされると、複製が再起動されます。この方法は、バックアップからあるサーバを復元し、その復元したデータを他のサーバにコピーする必要があるときに使用されます。
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unity Connection
このコマンドは、Connection クラスタ内のパブリッシャ サーバを交換した後またはパブリッシャ サーバに Connection を再インストールした後、パブリッシャ サーバとの間にクラスタ関係を構築します。このコマンドにより、パブリッシャ サーバ上のすべてのデータがサブスクライバ サーバのデータで上書きされ、サーバ間の複製が初期化されます。
utils cuc cluster renegotiate
管理者(admin:)
このコマンドは、Connection クラスタ内のサブスクライバ サーバで実行して、交換したパブリッシャ サーバまたは Connection を再インストールしたパブリッシャ サーバとの間に信頼関係を設定します。
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unity Connection
このコマンドは、テクニカル サポートのスタッフがシステムをトラブルシューティングするのに役立つデータを収集します。収集されるデータには、バージョン情報、クラスタ ステータス、サービス情報、データベース情報、トレース ファイル、ログ ファイル、ディスク情報、メモリ情報、および再起動情報が含まれます。
utils cuc create report
管理者(admin:)
コマンドが完了すると、詳細情報が .zip ファイルに保存され、その .zip ファイルの場所が表示されます。file get コマンドを使用して、ファイルを圧縮解除して内容を表示できるコンピュータに移動します。
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unity Connection のみ
admin: utils cuc create report Getting unity connection version. Please wait...Done Getting cluster status. Please wait...Done Getting service information. Please wait...Done Getting installed locales. Please wait...Done Getting database schema version. Please wait...Done Getting database integrity. Please wait...Done Getting database diagnostic log. Please wait...Done Getting database message log. Please wait...Done Getting trace files. Please wait...Done Getting log files. Please wait...Done Getting platform status. Please wait...Done Compressing 75 files. Please wait...Done Output is in file: cuc/cli/systeminfo_080318-140843.zip To free disk space, delete the file after copying it to another computer
utils cuc dbreplication*
utils cuc dbreplication 01_tear_down
コマンド モード
管理者(admin:)
使用上のガイドライン
(注) | 次の処理が推奨されます。
|
要件
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unity Connection
このコマンドは、クラスタ内の Unity Connection サーバ間のネットワーク接続を確立します。
utils cuc dbreplication 02_define_servers
コマンド モード
管理者(admin:)
使用上のガイドライン
(注) | 次の処理が推奨されます。
|
(注) | このコマンドは、Unity Connection クラスタに古いデータがあるサーバで実行する必要があります。 |
要件
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unity Connection
このコマンドは、同期レプリケーションのため、Unity Connection データベースでテーブルの設定のレプリケーション レコードを作成します。また、このコマンドは、レプリケーション スキーマを確立する必要がある Unity Connection データベースのテーブル テンプレートをネゴシエートします。
utils cuc dbreplication 03_define_db_template
コマンド モード
管理者(admin:)
使用上のガイドライン
(注) | 次の処理が推奨されます。
|
要件
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unity Connection
このコマンドは、リモート サーバからコマンドが実行されるサーバにデータベースを同期させます。
utils cuc dbreplication 04_sync_database
コマンド モード
管理者(admin:)
使用上のガイドライン
(注) | 次の処理が推奨されます。
|
要件
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unity Connection
このコマンドは、Unity Connection クラスタの 2 台のサーバ間のデータベース レプリケーションをリセットするために必要な、サーバの破棄や定義などのすべてのタスクを実行します。
utils cuc dbreplication reset_all
コマンド モード
管理者(admin:)
使用上のガイドライン
このコマンドは、以下のコマンドを順番に実行し、Unity Connection クラスタの 2 台のサーバ間のデータベース レプリケーションを確実にリセットします。
(注) | 次の処理が推奨されます。
|
要件
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unity Connection
utils cuc encryption { enable | disable | status }
パラメータ | 説明 |
---|---|
enable | Unity Connection で暗号化を有効にします。有効にすると、Unity Connection でセキュリティ機能を使用できます。 |
disable | Unity Connection で暗号化を無効にします。無効にすると、Unity Connection でセキュリティ機能を使用できません。 |
status | Unity Connection の暗号化ステータスを表示します。 |
Unity Connection で暗号化を有効にするときは、次の点を確認してください。
Cisco Unity Connection のエクスポート制御機能を登録および有効にする方法の詳細については、https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/12x/install_upgrade/guide/b_12xcuciumg.html で入手可能な『Install, Upgrade and Maintenance Guide for Cisco Unity Connection Release 12.x』の「Managing Licenses」の章の「Configuring Cisco Smart Software Licensing in Unity Connection」の項を参照してください。
(注) | クラスタの場合、CLI はパブリッシャ サーバ上でのみ実行されます。 |
管理者(admin:)
コマンド特権レベル:4
アップグレード時の使用:不可
適用対象:Cisco Unity Connection
admin:utils cuc encryption enable After successful execution, restart the following services on all nodes in the cluster 1.Connection Conversation Manager 2.Connection IMAP Server Do you want to proceed (yes/no)? yes Encryption enabled successfully
utils cuc jetty ssl disable
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unity Connection
admin: utils cuc jetty ssl disable After successful execution of this command restart of Jetty server is required, which will result in loss of current event subscriptions. Are you sure? Enter (yes/no)? yes Command completed successfully. Please restart Connection Jetty Service. In case of cluster, run this command on the other node also.
utils cuc jetty ssl enable
Jetty サーバで SSL を有効にするときは、次の点を確認してください。
(注) | 評価モードでは、CLI コマンドを実行できない。 |
詳細については、https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/12x/security/b_12xcucsecx.html で入手可能な『Security Guide for Cisco Unity Connection Release 12.x』の「Cisco Unity Connection- Restricted and Unrestricted Version」の章を参照してください。
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unity Connection
admin: utils cuc jetty ssl enable After successful execution of this command restart of Jetty server is required, which will result in loss of current event subscriptions. Are you sure? Enter (yes/no)? yes Command completed successfully. Please restart Connection Jetty Service. In case of cluster, run this command on the other node also.
このコマンドは、サーバ上のすべての Digital Networking 複製アクティビティを停止します。
utils cuc networking clear_replication
管理者(admin:)
このコマンドは、Connection Digital Networking Replication Agent および Connection SMTP サービスを停止した後、drop、queue、および pickup replication フォルダを削除し、このサーバに対して進行中のディレクトリのプッシュまたはプルのステータスをクリアしてから、Connection Digital Networking Replication Agent および Connection SMTP サービスを再起動します。複製フォルダのサイズによって、この操作には数分かかることがあります。
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unity Connection
このコマンドでは、クラスタ内の Connection サーバ間で送信されるパケットの DSCP 値を 18 に設定する処理を開始または停止できます。このため、DSCP 値に基づいてパケットの優先順位を決定するルータでは、Connection データおよびボイス メッセージを優先させることができます。
utils cuc networking dscp { on | off }
パラメータ | 説明 |
---|---|
on | ネットワークで送信されるパケットの DSCP 値を 18 に設定する処理を開始します。 |
off | ネットワークで送信されるパケットの DSCP 値を 18 に設定する処理を停止します。18 はデフォルト値です。 |
管理者(admin:)
このコマンドは、クラスタ内の Connection サーバ間で渡されるパケットで DSCP 値を使用できるようにします。実際に DSCP 値を使用するには、ルータを設定する必要があります。このコマンドでは、発信パケットに DSCP 値を含めるかどうかは制御できますが、DSCP 値自体は変更できません。
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unity Connection のみ
このコマンドは、指定されたユーザ アカウントのパスワードをリセットします。サインインを試行して失敗した回数が多すぎるために Connection がアカウントをロックした場合は、このコマンドもアカウントのロックを解除します。
utils cuc reset password
管理者(admin:)
コマンド特権レベル:4
アップグレード時の使用:可能
適用対象:Cisco Unity Connection のみ
admin: utils cuc reset password jdoe Enter password: Re-enter password: jdoe 07/29/2008 12:41:14.704 : Update SUCCESSED
このコマンドは、Cisco Unity Connection 電話ユーザ インターフェイス(タッチトーン カンバセーション)PIN 機能をイネーブルにし、条件付き期限切れの警告プロンプトが再生されている間、時間間隔を更新できるようにします。
utilscuc set PinExpiry_PromptTime "Authentication Rule Name" CLI コマンドの詳細については、『Release Notes for Cisco Unity Connection 10.0(1)』の「Cisco Unity Connection telephone user interface (touchtone conversation) PIN」の項を参照してください。
utils dbreplication*
このコマンドを使用すると、クラスタ全体で複製がリセットされます。
utils dbreplication clusterreset
管理者(admin:)
(注) | このコマンドを実行する前に、utils dbreplication stop コマンドをすべてのサブスクライバ サーバで実行し、その後、パブリッシャ サーバでも実行します。 |
このコマンドを使用すると、データベースの複製をデバッグできます。ただし、これは utils dbreplication reset all を試し、クラスタで複製を再起動できなかった場合にのみ使用してください。このコマンドでは、クラスタ全体の複製が破棄され、再構築されます。このコマンドを使用した後は、各サブスクライバ サーバを再起動する必要があります。すべてのサブスクライバ サーバが再起動されたら、パブリッシャ サーバで CLI コマンド utils dbreplication reset all を実行します。
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このコマンドは、クラスタ内のすべてのサーバにある Informix の syscdr データベースをドロップします。
utils dbreplication dropadmindb
管理者(admin:)
このコマンドは、データベース レプリケーションのリセットまたはクラスタのリセットが失敗し、複製を再起動できない場合にのみ使用します。
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このコマンドを実行すると、サブスクライバ サーバのデータがパブリッシャ サーバ上のデータから復元されます。
utils dbreplication forcedatasyncsub nodename [offloadpub] [timeoutvalue]
パラメータ | 説明 | ||
---|---|---|---|
nodename |
特定のサブスクライバ サーバのデータをパブリッシャ サーバ上のデータから復元するように指定します。すべてのサブスクライバ サーバでデータを復元するには、all を入力します。 |
||
offloadpub |
forcedatasyncsub プロセス中のパブリッシャ サーバの使用量を最小限に抑えます。
|
||
timeoutvalue |
各ノードに対してリカバリ タイムアウトの値を分単位で指定します(デフォルトのタイムアウトより大きくする必要があります)。 デフォルトは 40 分です。 |
管理者(admin:)
このコマンドは、utils dbreplication repair コマンドを数回実行してから utils dbreplication status コマンドを実行しても、非動的テーブルが同期しない場合にのみ使用します。
(注) | 動的テーブルが同期しないだけの場合には使用しないでください。動的テーブルは、通常のシステム動作中でも同期しないことがあります。 |
このコマンドは、パブリッシャ サーバからのみ実行できます。クラスタ内のすべてのサブスクライバ サーバを同期させるには、all を入力します。1 つのサブスクライバ サーバだけが同期しない場合は、nodename パラメータを使用します。
(注) | このコマンドでは、サブスクライバ サーバ上にある既存のデータはすべて消去され、パブリッシャ サーバ上のデータに置き換えられます。そのため、サブスクライバ サーバのテーブルが同期しなくなった原因を調べることはできなくなります。 |
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このコマンドは、動的テーブル上の選択された内容に対して、短時間のデータベース チェックを実行します。
utils dbreplication quickaudit { nodename | all }
パラメータ | 説明 |
---|---|
nodename |
短時間の監査を実行するノードを指定します。 |
all |
すべてのノードで監査が実行されます。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
Unified Communications Manager パブリッシャまたはサブスクライバ ノードのホスト名を変更した後、クラスタ全体のデータベース レプリケーションを設定するには、このコマンドを実行する必要があります。このコマンドは、指定したノードで次のコマンドを実行します。
utils dbreplication rebuild { [nodename] | | all }
パラメータ | 説明 |
---|---|
nodename |
データベース レプリケーションを再構築するノードを指定します。 |
all |
クラスタ内のすべてのノードで再構築されるデータベース レプリケーションを指定します。 |
管理者(admin:)
注意 | このコマンドは、クラスタ内の他のノードのパフォーマンスに影響する場合があります。システム メンテナンス ウィンドウでこのコマンドを実行することを推奨します。 |
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このコマンドは、データベース複製を修復します。
utils dbreplication repair { nodename | all }
パラメータ | 説明 |
---|---|
nodename |
データ修復を行う特定のサブスクライバ サーバを指定します。 |
all |
すべてのサブスクライバ サーバでデータ修復が行われます。 |
管理者(admin:)
サーバが接続されていることが utils dbreplication status コマンドによって示されているにもかかわらず、1 つまたは複数のテーブルのデータが同期しない場合に、utils dbreplication repair コマンドはサブスクライバ サーバ上のデータがパブリッシャ サーバ上のデータと同期するように修復します。
クラスタ内のすべてのノードを修復するには、all パラメータを指定します。1 つのサブスクライバ サーバだけが同期していない場合は、nodename パラメータを指定します。
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このコマンドは、クラスタ ノード間で一致していないデータを修復し、パブリッシャ データと一致するようにノード データを変更します。
utils dbreplication repairreplicate replicatename [ nodename | all ]
パラメータ | 説明 |
---|---|
replicatename |
修復する複製を指定します。 |
nodename |
複製を修復するノードを指定します。 |
all |
すべてのノードで複製を修復することを指定します。 |
管理者(admin:)
パラメータ nodename は、パブリッシャを指定するとは限りません。サブスクライバのノード名も指定できます。
(注) | このコマンドは、パブリッシャ上で実行できます。 |
(注) | このコマンドは、複製の設定は修復しません。 |
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このコマンドは、クラスタ ノード間で一致していないデータを修復し、パブリッシャ データと一致するようにノードを変更します。
utils dbreplication repairtable tablename [ nodename | all ]
パラメータ | 説明 |
---|---|
tablename |
修復するテーブルを指定します。 |
nodename |
複製を修復するノードを指定します。 |
all |
すべてのノードで複製を修復することを指定します。 |
管理者(admin:)
(注) | このコマンドは、複製の設定は修復しません。 |
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このコマンドは、データベース複製をリセットして再起動します。システムで複製が適切に設定されていないときは、このコマンドを使用して複製を再構築できます。
utils dbreplication reset { nodename | all }
パラメータ | 説明 |
---|---|
nodename |
特定のサブスクライバ サーバの複製が再構築されるように指定します。 |
all |
クラスタ内のすべてのサブスクライバ サーバの複製が再構築されるように指定します。 |
管理者(admin:)
このコマンドは、サーバで RTMT 状態 4 が示されたときに使用するのに最適なオプションです。1 つのサブスクライバ サーバだけが RTMT 状態 4 を示している場合は、hostname パラメータを指定することにより、そのサーバをリセットできます。クラスタ全体をリセットするには、all パラメータを使用します。
ヒント | このコマンドを実行する前に、リセットするすべてのサブスクライバ サーバで utils dbreplication stop コマンドを実行し、その後、パブリッシャ サーバでも実行します。 |
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このコマンドは、データベース複製プロセスの進捗を監視し、クラスタ内の複製状態を出力します。
utils dbreplication runtimestate nodename
パラメータ | 説明 |
---|---|
nodename |
モニタするノードを指定します。 |
管理者(admin:)
ノード名を指定すると、選択されたノードのコンテキストから複製状態が出力されます。
コマンド特権レベル:0
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このコマンドは、WAN によって分離されて遅延を伴うノードを持つクラスタ(WAN でのクラスタ設定)の複製パフォーマンスを向上させます。
utils dbreplication setprocess [process]
パラメータ | 説明 |
---|---|
process |
新規のデータベース複製。この値は、1 から 40 までです。 デフォルト値:1 |
管理者(admin:)
注意 | process オプションを最大値に近い値に設定すると、システム リソースの消費量が増加します。 アップグレードの後、新しいバージョンに切り替える前に行った変更は、手動で再適用する必要があります。 |
コマンド特権レベル:1
アップグレード時の使用:不可
このコマンドは、大きなクラスタでデータベース複製のタイムアウトを設定します。
utils dbreplication setrepltimeout タイムアウト
パラメータ | 説明 |
---|---|
タイムアウト |
新しいデータベース複製のタイムアウト時間(秒)。この値は、300 から 3600 までです。 デフォルト値:300(5 分) |
管理者(admin:)
最初のサブスクライバ サーバがパブリッシャ サーバに複製を要求すると、このタイマーが設定されます。タイマーの期限が切れると、最初のサブスクライバ サーバ、およびその期間内に複製を要求した他のすべてのサブスクライバ サーバが、パブリッシャ サーバとの間でバッチによるデータ複製を開始します。複数のサブスクライバ サーバがある場合は、個別のサーバ複製よりもバッチ複製が効率的です。大きなクラスタでは、このコマンドを使用してデフォルトのタイムアウト値よりも大きくすることで、バッチに含めるサブスクライバ サーバの数を増やすことができます。
ヒント | クラスタ全体のアップグレードが完了し、サブスクライバ サーバの複製が適切に設定されたら、この値をデフォルトの 300(5 分)に戻すことをお勧めします。 |
(注) | パブリッシャ サーバをアップグレードし、アップグレード後のパーティションで再起動する場合は、最初のサブスクライバ サーバを新しいリリースに切り替える前に、このタイマー値を設定する必要があります。最初のサブスクライバ サーバが複製を要求すると、パブリッシャ サーバはこの新しい値に基づいて複製タイマーを設定します。 |
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このコマンドは、データベース複製のステータスを表示し、クラスタ内のサーバが接続されてデータが同期しているかどうかを示します。
utils dbreplication status { all | node | replicate }
パラメータ | 説明 |
---|---|
all | すべてのサーバのステータスを表示するように指定します。 |
node | ステータスを表示するノードを指定します。 |
replicate | ステータスを表示する複製を指定します。 |
管理者(admin:)
(注) | このコマンドは、クラスタの最初のノード(パブリッシャ サーバ)でのみ実行してください。 |
コマンド特権レベル:0
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このコマンドは、データベース複製の自動設定を停止します。このコマンドは、サブスクライバおよびパブリッシャ サーバで、CLI コマンド utils dbreplication reset または utils dbreblication clusterreset を実行する前に実行します。このコマンドは、パブリッシャ サーバで実行する前に複数のサブスクライバ サーバで同時に実行できます。
utils dbreplication stop { nodename | all }
パラメータ | 説明 |
---|---|
nodename |
データベース複製の自動設定を停止するノードの名前を指定します。 |
all |
すべてのノードでデータベース複製を停止します。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このコマンドは、導入における各サブクラスタのノード ペア間のイン メモリ データベース(IMDB)レプリケーションが正しく動作することを検証します。
このコマンドは、IM and Presence サービス ノードの発信からのユーティリティを使用して、それぞれの関連するデータストアの IMDB テーブルで読み取りおよび書き込みを実行します。
管理者(admin:)
ユーティリティを正常に実行するには、IM and Presence サービス クラスタのノード間で設定されたすべてのファイアウォールでポート 6603、6604、6605 が開いている必要があります。
これは IMDB の正常な動作には不要です。
コマンド特権レベル:0
アップグレード時の使用:可能
適用対象:IM and Presence サービス
このコマンドを使用すると、システムの問題を診断し、自動修復を試行できます。
utils diagnose { fix | list | module | test | version } [module_name]
パラメータ | 説明 |
---|---|
fix |
すべての診断コマンドを実行し、問題の修復を試行します。 |
hcs |
HCS サービスで使用可能なすべての診断コマンドをリスト表示します。 |
list |
使用可能なすべての診断コマンドをリスト表示します。 |
module |
単独の診断コマンドまたはコマンドのグループを実行し、問題の修復を試行します。 |
test |
すべての診断コマンドを実行しますが、問題の修復は試行しません。 |
version |
診断フレームワークのバージョンを表示します。 |
module_name |
診断モジュールの名前を指定します。 |
管理者(admin:)
コマンド特権レベル:version の場合は 0、その他すべてのパラメータの場合は 1
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
utils disaster_recovery*
リモート サーバに格納されるバックアップ ファイルに関する情報を表示します。
utils disaster_recovery backup network [featurelist] [path] [servername] [username]
パラメータ | 説明 |
---|---|
featurelist | バックアップする機能のリストを、カンマ区切りで指定します。 |
path | リモート サーバ上のバックアップ ファイルの場所を表します。 |
servername | バックアップ ファイルを格納するサーバの IP アドレスまたはホスト名を表します。 |
username | リモート サーバにログインするときに必要なユーザ名を表します。 |
管理者(admin:)
リモート サーバ上のアカウントのパスワードを入力するように要求するプロンプトが表示されます。
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
このコマンドは、進行中のバックアップ ジョブをキャンセルします。
utils disaster_recovery cancel_backup [confirm]
管理者(admin:)
コマンドの入力後、バックアップのキャンセルについて確認する必要があります。Y を押すとバックアップがキャンセルされ、それ以外のキーを押すとバックアップが続行します。
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
admin: utils disaster_recovery cancel_backup yes Cancelling backup... Backup cancelled successfully.
このコマンドは、バックアップ ネットワーク デバイスを追加します。
utils disaster_recovery device add network devicename path server_namei/ip_address username [Number_of_backups]
パラメータ | 説明 |
---|---|
devicename | 追加するバックアップ デバイスの名前を指定します(必須)。 |
path | バックアップ デバイスを取得するパスを指定します(必須)。 |
server_name/ip_address | バックアップ ファイルが格納されているサーバのホスト名または IP アドレスを指定します(必須)。 |
username | リモート マシンに接続するために必要なユーザ ID を指定します(必須)。 |
Number_of_backups | ネットワーク ディレクトリに格納するバックアップの数を指定します(デフォルトは 2)。このパラメータはオプションです。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
admin: utils disaster_recovery device add network networkDevice /root 10.77.31.116 root 3
このコマンドは、指定されたデバイスを削除します。
utils disaster_recovery device delete device_name | *
パラメータ | 説明 |
---|---|
device_name | 削除するデバイスの名前です。 |
* | スケジュールに関連付けられているデバイスを除き、既存のすべてのデバイスを削除します。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
すべてのバックアップ デバイスのデバイス名、デバイス タイプ、およびデバイス パスを表示します。
utils disaster_recovery device list
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
このコマンドは、SFTP またはローカル デバイスから最後に成功したバックアップの推定サイズを示します。
utils disaster_recovery estimate_tar_size utils disaster_recovery device list
パラメータ | 説明 |
---|---|
featurelist |
バックアップする機能のリストを、カンマ区切りで指定します。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
このコマンドは、以前のバックアップと復元の履歴を表示します。
utils disaster_recovery history [operation]
パラメータ | 説明 |
---|---|
operation | バックアップまたは復元を指定します。 |
管理者(admin:)
コマンド特権レベル:
アップグレード時の使用:
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
admin: utils disaster_recovery history backup Tar Filename: Backup Device: Completed On: Result: Backup Type: Features Backed Up: 2009-10-30-14-53-32.tar TAPE Fri Oct 30 14:55:31 CDT 2009 ERROR MANUAL 2009-12-10-10-30-17.tar TAPE Thu Dec 10 10:35:22 CST 2009 SUCCESS MANUAL CDR_CAR,CCM
このコマンドは、JSch の詳細ロギングを有効および無効にします。
utils disaster_recovery jschLogs operation [operation]
パラメータ | 説明 |
---|---|
operation |
操作の名前(enable または disable)を指定します。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
このコマンドは、サブスクライバ ノードからパブリッシャ ノードを復元する準備をするためのタスクを処理します。
(注) | このコマンドは、パブリッシャ ノードを再構築し、サブスクライバ ノード データベースから復元する場合にのみ使用できます。リモート バックアップ ソースからデータを復元する代わりに、特定の復元手順が使用されます。パブリッシャ ノードが再構築されたら、プロセス ノード情報の挿入前にこのコマンドを使用する必要があります。 |
utils disaster_recovery prepare restore pub_from_sub
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
このコマンドは、リモート サーバを復元します。同じクラスタのサブスクライバ ノードを復元する前に、Cisco Unified Communications Manager パブリッシャ ノードを復元する必要があります。IM and Presence Service ノードを復元すると、同じクラスタ内のサブスクライバ ノードを復元する前にデータベース パブリッシャ ノードを復元する必要があります。
utils disaster_recovery restore network restore_server tarfilename devicename
パラメータ | 説明 |
---|---|
restore_server | 復元するリモート サーバのホスト名を指定します。 |
tarfilename | 復元するファイルの名前を指定します。 |
devicename | ファイルを復元するデバイスの名前を指定します。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
このコマンドは、設定されているスケジュールを追加します。
utils disaster_recovery schedule add schedulename devicename featurelist datetime frequency
パラメータ | 説明 |
---|---|
schedulename | スケジューラの名前を表します(必須)。 |
devicename | スケジューリングが行われているデバイスの名前を表します(必須)。 |
featurelist | バックアップするカンマ区切り機能リストを表します(必須)。 |
datetime | スケジューラを設定する日付を表します(必須)。yyyy/mm/dd-hh:mm という形式で 24 時間制で指定します。 |
frequency | バックアップを作成するようにスケジュールを設定する頻度を表します。例:1 回、日次、週次、月次。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
このコマンドは、指定されたスケジュールをイネーブルまたはディセーブルにします。
utils disaster_recovery schedule { enable | disable } [schedulename]
パラメータ | 説明 |
---|---|
enable | 指定されたスケジュールをイネーブルにします。 |
disable | 指定されたスケジュールをディセーブルにします。 |
schedulename | スケジューラの名前を表します。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
admin: utils disaster_recovery schedule enable schedule1 Schedule enabled successfully.
このコマンドは、設定されているスケジュールを削除します。
utils disaster_recovery schedule delete schedulename
パラメータ | 説明 |
---|---|
schedulename |
削除するスケジュールの名前を表します。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
このコマンドは、設定されているスケジュールを無効にします。
utils disaster_recovery schedule disable schedulename
パラメータ | 説明 |
---|---|
schedulename |
無効にするスケジュールの名前を表します。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
設定されているスケジュールを表示します。
utils disaster_recovery schedule list
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
admin: utils disaster_recovery schedule list schedule name device name Schedule Status ----------------------------------------- schedule1 device 1 enabled schedule2 device 2 disabled
このコマンドは、ストレージの場所で入手できるバックアップ ファイルの情報を取得します。
utils disaster_recovery show_backupfiles devicename
パラメータ | 説明 |
---|---|
devicename |
ストレージの場所でバックアップ ファイルを表示するデバイスの名前を表します。 |
管理者(admin:)
コマンド特権レベル:0
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
このコマンドは、指定されたサーバに登録されているフィーチャおよびコンポーネントを表示します。
utils disaster_recovery show_registration hostname
パラメータ | 説明 |
---|---|
hostname | 登録情報を表示するサーバを指定します。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
このコマンドは、現在のバックアップまたは復元ジョブのステータスを表示します。
utils disaster_recovery status operation
パラメータ | 説明 |
---|---|
operation | 進行中の操作の名前(backup または restore)を指定します。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
utils EnhancedSecurityMode*
このコマンドは、システムで EnhancedSecurityMode モードを無効にします。このモードを無効にした後、システムのリブートが必要です。
utils EnhancedSecurityMode disable
管理者(admin:)
コマンド特権レベル:4
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
このコマンドは、システムで EnhancedSecurityMode モードを有効にします。このモードを有効にした後、システムのリブートが必要です。
utils EnhancedSecurityMode enable
管理者(admin:)
コマンド特権レベル:4
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
このコマンドは、システムが EnhancedSecurityMode モードまたは非 EnhancedSecurityMode モードのいずれで動作しているかを表示します。
utils EnhancedSecurityMode status
管理者(admin:)
コマンド特権レベル:0
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
utils filebeat*
このコマンドは、情報をダウンロードするための Logstash サーバの詳細を構成します。
utils filebeat config IP address port number log type
パラメータ | 説明 |
---|---|
IP address |
Logstash サーバの IP アドレスを入力します。 |
port number |
Logstash サーバのポート番号を入力します。 |
log type |
Logstash サーバにアップロードする必要があるログ タイプを入力します。 |
TLS を有効にして、Filebeat サービスをセキュリティで保護することもできます。パラメータを設定すると、次のプロンプトが表示されます。
Do you wish to secure the filebeat service by enabling TLS?
Enter (yes/no) ?
TLS を有効にする場合は、Yes と入力します。
管理者(admin:)
コマンド特権レベル:4
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
このコマンドは、システムで Filebeat 構成を無効にします。
utils filebeat disable
管理者(admin:)
コマンド特権レベル:4
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
このコマンドは、システムで Filebeat 構成を有効にします。
utils filebeat disable
管理者(admin:)
コマンド特権レベル:4
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
このコマンドは、Filebeat が実行されているかどうか、およびその構成値を表示します。
utils filebeat status
管理者(admin:)
コマンド特権レベル:4
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
このコマンドは、Filebeat クライアントと Logstash サーバ間の通信用のプロトコルとして、Transport Layer Security(TLS)1.2 を設定します。これにより、Filebeat クライアントと Logstash サーバ間のセキュアな接続が可能になります。これは、コモン クライテリア ガイドラインに準拠するための要件です。
コモン クライテリア モードでは、厳密なホスト名検証が使用されます。そのため、サーバには、証明書と一致する完全修飾ドメイン名(FQDN)を設定する必要があります。
utils filebeat tls { enable | disable | status }
パラメータ | 説明 |
---|---|
enable |
Filebeat クライアントと Logstash サーバ間のセキュアな接続を有効にします。 |
disable |
Filebeat クライアントの TLS を無効にします。 |
status |
TLS のステータスを表示します。 |
管理者(admin:)
コマンド特権レベル:4
適用対象:Cisco Unified Communications Manager および Cisco Unified Communications Manager の IM and Presence サービス
セキュリティ証明書を、Logstash サーバから Cisco Unified Communications Manager および IM and Presence サービス上の tomcat 信頼ストアにアップロードする必要があります。
utils fior*
このコマンドを使用すると、サーバの I/O をモニタリングできます。ファイル I/O レポーティング サービスは、プロセスごとにファイル I/O を収集するカーネル ベースのデーモンを提供します。
utils fior
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
このコマンドは、I/O 統計モニタリングを無効にして、システムで収集されたすべてのモニタリング データを削除します。このコマンドは、モニタリングを無効にし、データのモニタリングにより使用されるディスク領域を解放するために使用します。
utils fior disable
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
このコマンドは、I/O 統計モニタリングを有効にします。
(注) | このコマンドは、モニタリングが開始される前に使用します。 |
utils fior enable
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
このコマンドは、すべてのプロセスの I/O イベントをリスト表示します。
utils fior list
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
このコマンドは、I/O 統計ユーティリティのモニタリングとデータ収集を開始します。モニタリングの開始後、I/O 統計データはプラットフォーム ログに収集されます。このデータは、1 日あたり最大 25 MB 格納できます。データは、データ収集から 7 日後に新しいデータにローテーションされます。このデータは、I/O 統計ユーティリティ モニタリングを無効にすると削除されます。
(注) | モニタリングを開始する前に I/O 統計ユーティリティ モニタリングを有効にしてください。 |
utils fior start
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
このコマンドは、I/O 統計モニタリング ユーティリティのステータスを示します。
utils fior status
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
このコマンドは、I/O 統計モニタリングとデータ収集を停止します。ただし、このコマンドでは収集されたデータは削除されません。
(注) | I/O 統計が不要になった場合は、プラットフォーム ログからのモニタリング データのクリーンアップを無効にします。 |
utils fior stop
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
このコマンドは、コマンド実行時の I/O バウンド型プロセスの I/O 統計情報のリストを表示します。
utils fior top
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
注意 | FIPS モードは、FIPS 準拠のリリースだけでサポートされます。Cisco Unified Communications Manager を FIPS 非準拠のバージョンにアップグレードする前に、必ず FIPS モードを無効にしてください。 リリースが FIPS コンプライアンスでその証明書を表示する方法については、http://www.cisco.com/web/strategy/government/security_certification/net_business_benefit_seccert_fips140.html の FIPS 140 のドキュメントを参照してください。 |
このコマンドは、FIPS 140-2 モードをイネーブルまたはディセーブルにします。また、FIPS 140-2 モードのステータスを表示します。FIPS 140-2 モードはデフォルトでディセーブルです。FIPS をイネーブルにできるのは管理者のみです。
utils fips { enable | disable | status }
パラメータ | 説明 |
---|---|
enable | FIPS 140-2 モードをアクティブにします。 |
disable | FIPS 140-2 モードを非アクティブにします。 |
status | FIPS 140-2 モードのステータスを表示します。 |
管理者(admin:)
FIPS モードをイネーブルにする前に、システム バックアップを実行することを推奨します。FIPS のチェックが起動時に失敗した場合は、システムが停止し、復元するにはリカバリ CD が必要になります。
FIPS 140-2 モードをイネーブルにする前に、次の点を考慮してください。
非 FIPS から FIPS モードに切り替えた場合は、MD5 および DES プロトコルは機能しません。
FIPS モードをサーバでイネーブルにした後は、サーバがリブートし、電話機が正常に再登録されるまで待機してから、次のサーバで FIPS をイネーブルにしてください。
FIPS モードでは、IM and Presence サービスは Racoon(FIPS 未検証)の代わりに Red Hat Openswan(FIPS 検証済み)を使用します。Raccoon のセキュリティ ポリシーに、FIPS で承認されていない機能が含まれている場合、CLI コマンドは、FIPS で承認された機能を使用してセキュリティ ポリシーを定義し直すよう表示して終了します。
(注) | 証明書および SSH キーは、FIPS 要件に応じて、自動的に再生成されます。 |
FIPS 140-2 モードをディセーブルにする前に、次の点を考慮します。複数サーバのクラスタでは、各サーバは個別にディセーブルにする必要があります。FIPS モードはクラスタ全体でディセーブルにできないため、サーバ単位でディセーブルにしてください。
FIPS 140-2 モードをイネーブルにした後、次の点を考慮します。シングル サーバ クラスタを使用していて、FIPS モードをイネーブルにする前に「Prepare Cluster for Rolback to pre 8.0」エンタープライズ パラメータの適用を選択した場合は、すべての電話機がサーバに正常に登録されたことを確認してから、このパラメータをディセーブルにしてください。
IM and Presence サービスに FIPS 140-2 モードをイネーブルまたはディセーブルにする前に、次のことを考慮してください。IM and Presence サービスの FIPS 140-2 モードをイネーブルまたはディセーブルにすると、Tomcat 証明書が再生成されて、ノードが再起動します。Intercluster Sync Agent は、新しい Tomcat 証明書をクラスタ全体で同期します。この同期が完了するまでには最大 30 分かかります。新しい Tomcat 証明書がクラスタ全体で同期されるまで、IM and Presence サービス サブスクライバ ノードは IM and Presence サービス データベース パブリッシャ ノードの情報にアクセスできません。たとえば、サブスクライバ ノードで Cisco Unified Serviceability GUI にログインしたユーザは、IM and Presence サービス データベース パブリッシャ ノードのサービスを表示できません。同期が完了するまで、ユーザには、証明書例外によるサーバへの接続を確立できないことを通知する、Connection to server cannot be established (certificate exception) というメッセージが表示されます。
コマンド特権レベル:0
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
このコマンドは、システムのコモン クライテリア モードを設定します。
utils fips_common_criteria { enable | disable | status }
パラメータ | 説明 |
---|---|
enable |
システムでコモン クライテリア モードを有効にします。 |
disable |
システムでコモン クライテリア モードを無効にします。 コモン クライテリア モードが無効化されると、最小 TLS バージョンを設定するよう求めるプロンプトが表示されます。 |
status |
システムのコモン クライテリア モードのステータスを表示します。 |
管理者(admin:)
コモン クライテリア モードを有効化した後では、TLS バージョン 1.0 を使用したセキュア接続は許可されません。コモン クライテリア モードを有効にしている間は、FIPS モードが有効になります。コモン クライテリア モードを有効化または無効化しても、証明書を再生成する必要はありません。ただし、FIPS を有効化または無効化すると、証明書を再生成する必要があります。IM and Presence Service サーバでコモン クライテリア モードが有効になっている場合、MS SQL 外部データベース サーバと IM and Presence サービス サーバ間での TLS 接続はサポートされません。
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager および IM and Presence サービス
(注) | この CLI コマンドは、Cisco Unity Connection には適用されません。 |
utils firewall*
このコマンドは、IPv4 ファイアウォールのデバッグをオンまたはオフにします。time パラメータを入力しない場合、デバッグは 5 分間オンになります。
utils firewall ipv4 debug { off | | [時刻] }
パラメータ | 説明 |
---|---|
off |
IPv4 ファイアウォールのデバッグをオフにします。time パラメータを入力しない場合、ファイアウォールは 5 分間ディセーブルになります。 |
時刻 |
|
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection。
このコマンドは、IPv4 ファイアウォールをイネーブル/ディセーブルにします。
utils firewall ipv4 { enable | disable | [time] }
パラメータ | 説明 |
---|---|
enable |
IPv4 ファイアウォールをオンにします。 |
disable |
IPv4 ファイアウォールをオフにします。time パラメータを入力しない場合、ファイアウォールは 5 分間ディセーブルになります。 |
時刻 |
|
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection。
このコマンドは、IPv4 ファイアウォールの現在の設定を表示します。
utils firewall ipv4 list
管理者(admin:)
コマンド特権レベル:0
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection。
このコマンドは、IPv4 ファイアウォールの現在のステータスを表示します。
utils firewall ipv4 status
管理者(admin:)
コマンド特権レベル:0
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection。
このコマンドは、設定された時間、IPv6 ファイアウォール デバッグをオンにします。時間のデフォルト値は 5 分です。
utils ipv6 firewall debug { off | | [時刻] }
パラメータ | 説明 |
---|---|
off |
(任意)IPv6 ファイアウォールのデバッグをオフにします。time パラメータを入力しない場合、このコマンドは、デフォルトの時間の値に従ってファイアウォールを無効にします。 |
時刻 |
|
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager および Cisco Unity Connection。
このコマンドは、IPv6 ファイアウォールをイネーブル/ディセーブルにします。
utils firewall ipv6 { enable | disable | [time] }
パラメータ | 説明 |
---|---|
enable |
IPv6 ファイアウォールをオンにします。 |
disable |
IPv6 ファイアウォールをオフにします。time パラメータを入力しない場合、ファイアウォールは 5 分間ディセーブルになります。 |
時刻 |
|
管理者(admin:)
このコマンドは、ファイアウォール テーブルをイネーブルまたはディセーブルにするために使用できます。USGv6 プロファイルとのコンプライアンスのために Unified Communications Manager をテストする場合は、テストを開始する前に 23 時間にわたり IPv6 ファイアウォール テーブルをディセーブルにする必要があります。
コマンド特権レベル:0
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager および Cisco Unity Connection。
このコマンドは、IPv6 ファイアウォールの現在の設定を表示します。
utils firewall ipv6 list
管理者(admin:)
コマンド特権レベル:0
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager および Cisco Unity Connection。
このコマンドは、IPv6 ファイアウォールの現在のステータスを表示します。
utils firewall ipv6 status
管理者(admin:)
コマンド特権レベル:0
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager および Cisco Unity Connection。
utils ha*
このコマンドは、特定のノードの手動フェールオーバーを開始します。このとき、Cisco Server Recovery Manager により、障害が発生したノードのクリティカル サービスが停止され、すべてのユーザがバックアップ ノードに移行されます。
IM and Presence ノードの場合、バックアップ ノードは別の IM and Presence サーバである必要があります。バックアップ サーバを指定する前に、2 つのサーバが同じ既存の冗長グループに割り当てられている必要があります。既存の冗長グループに割り当てられた他のサーバをバックアップ サーバに指定します。
utils ha failover { node name }
パラメータ | 説明 |
---|---|
node name | 手動フェールオーバーを実行するノードを指定します。 |
管理者(admin:)
適用対象:Cisco Unified Communications Manager および Cisco Unified Communications Manager の IM and Presence サービス
admin: ha failover shorty-cups Initiate Manual Failover for Node > shorty-cups Request SUCCESSFUL. Subcluster Name: DefaultCluster Node 1 Name : kal-cup1 State: Taking Over Reason: On Admin Request Node 2 Name : shorty-cups State: Failover Reason: On Admin Request
このコマンドは、特定のノードの手動フォールバックを開始します。このとき、Cisco Server Recovery Manager によりアクティブなノードでクリティカル サービスが再起動され、ユーザはアクティブなノードに戻されます。
utils ha fallback node name
パラメータ | 説明 |
---|---|
node name | 手動フォールバックを実行するノードを指定します。 |
管理者(admin:)
適用対象:Cisco Unified Communications Manager および Cisco Unified Communications Manager の IM and Presence サービス
admin: ha fallback shorty-cups Initiate Manual fallback for Node >shorty-cups< Request SUCCESSFUL. Subcluster Name: DefaultCluster Node 1 Name : kal-cup1 State: Falling Back Reason: On Admin Request Node 2 Name : shorty-cups State: Taking Back Reason: On Admin Request
このコマンドは、(ノードが障害状態の場合に)既存の冗長グループの手動リカバリを開始します。このとき、IM and Presence により、その既存の冗長グループで Cisco Server Recovery Manager サービスが再起動されます。
utils ha recover presence redundancy group name
パラメータ | 説明 |
---|---|
presence redundancy group name | HA ステータスをモニタする既存の冗長グループを指定します。既存の冗長グループ名を指定しないと、すべてのクラスタ情報が提供されます。 |
管理者(admin:)
適用対象:Cisco Unified Communications Manager および Cisco Unified Communications Manager の IM and Presence サービス
admin: ha recover Defaultcluster Stopping services... Stopped Starting services... Started admin:
このコマンドは、指定されたプレゼンス冗長グループの HA ステータスを表示します。
utils ha status presence redundancy group name
パラメータ | 説明 |
---|---|
presence redundancy group name | HA ステータスをモニタするプレゼンス冗長グループを指定します。プレゼンス冗長グループ名を指定しないと、すべてのクラスタ情報が表示されます。 |
管理者(admin:)
適用対象:Cisco Unified Communications Manager および Cisco Unified Communications Manager の IM and Presence サービス
admin: ha status Subcluster Name: DefaultCluster Node 1 Name : kal-cup1 State: Unknown Reason: High Availability Not Enabled Node 2 Name : shorty-cups State: Unknown Reason: High Availability Not Enabled
admin: ha status Subcluster Name: DefaultCluster Node 1 Name : kal-cup1 State: Normal Node 2 Name : shorty-cups State: Normal
admin: ha status Subcluster Name: DefaultCluster Node 1 Name : kal-cup1 State: Failed Over with Critical Services not Running Reason: Critical Service Down Node 2 Name : shorty-cups State: Running in Backup Mode Reason: Critical Service Down
admin: ha status Subcluster Name: DefaultCluster Node 1 Name : kal-cup1 State: Failed Reason: Critical Service Down Node 2 Name : shorty-cups State: Failed Reason: Critical Service Down
このコマンドは、ILS ネットワーク内のシングル クラスタ、または ILS ネットワーク内のすべてのクラスタのピア情報ベクトルを返します。
utils ils showpeerinfo clustername
パラメータ | 説明 |
---|---|
clustername | ILS ネットワーク内の Cisco Unified Communications Manager クラスタのパブリッシャ ノードの完全修飾ドメイン名を指定します。 |
管理者(admin:)
ピア情報ベクトルには、ILS ネットワーク内のクラスタに関する情報が含まれます。取得できる情報には、クラスタ ノードのクラスタ名、クラスタ ID、IP アドレスが含まれます。ILS ネットワークの特定のクラスタに関する情報が必要な場合は、clustername パラメータを入力します。ネットワーク内のすべてのクラスタ情報が必要な場合は、clustername パラメータをブランクにします。
コマンド特権レベル:0
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager
このコマンドは、仮想フロッピー ドライブ上の platformConfig.xml ファイルからデータを取得し、設定ファイルに一致するようにシステムを変更します。コマンドの完了後、システムがリブートします。
utils import config
管理者(admin:)
このコマンドは、すべての VMware 展開で実行できます。
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このコマンドは、指定された回数と間隔で iostat 出力を表示します。
utils iostat { interval | iterations | filename }
パラメータ | 説明 |
---|---|
interval |
iostat 読み取り間隔を秒数で設定します。iteration パラメータを使用する場合は、この値を設定する必要があります。 |
iterations |
iostat の繰り返し回数を設定します。interval パラメータを使用する場合は、この値を設定する必要があります。 |
filename |
出力をファイルにリダイレクトします。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
このコマンドを使用すると、サーバ上の I/O スロットリングを管理およびモニタリングできます。
utils iothrottle { enable | disable | status }
パラメータ | 説明 |
---|---|
Enable |
I/O スロットリング拡張をイネーブルにし、アクティブなシステムにアップグレードが与える影響を低減します。 |
Disable |
I/O スロットリング拡張をディセーブルにします。 |
Status |
I/O スロットリング拡張のステータスを表示します。 |
管理者(admin:)
I/O スロットリング拡張をディセーブルにすると、アップグレード時にシステムが影響を受ける可能性があります。
コマンド特権レベル:Enable および Disable の場合は 1、Status の場合は 0
このコマンドは、エンドポイントが自己の構成ファイルを検証できない場合に使用します。
utils itl reset { localkey | remotekey }
localkey |
パブリッシャの既存の ITL ファイルを取得して、新しい ITL ファイルを生成します。このコマンドは、その ITL ファイルの署名を置き換え、ITL 復元キーを使用して新しい ITL ファイルに署名します。 |
remotekey |
リモート ロケーションからの復元証明書キー ペアを格納する PKCS 12 バッグをインポートした後、新しい ITL ファイルを生成します。その新しく生成した ITL ファイルに、復元秘密鍵を使用して署名します。 remotekey 次のパラメータを持ちます。 |
管理者(admin:)
(注) | このコマンドは、Unified Communications Manager パブリッシャ ノードで実行する必要があります。 |
コマンド特権レベル:4
アップグレード時の使用:不可
適用対象:Unified Communications Manager
admin:utils itl reset Name is None Generating the reset ITL file..... The reset ITL file was generated successfully Locating active Tftp servers in the cluster..... Following is the list of Active tftp servers in the cluster ==================== se032c-94-42 ===================== Number of Active TFTP servers in the cluster : 1 Transferring new reset ITL file to the TFTP server nodes in the cluster......... Successfully transferred reset ITL to node se032c-94-42
このコマンドは、システムの LDAP 認証を設定します。
utils ldap config { fqdn | ipaddr }
パラメータ | 説明 |
---|---|
fqdn |
システムの LDAP 認証に FQDN を使用するように設定します。 |
ipaddr |
システムの LDAP 認証に IP アドレスを使用するように設定します |
管理者(admin:)
utils ldap config fqdn:LDAP 認証にはこのコマンドを使用することをお勧めしますが、このコマンドを使用できるのはシステムに DNS が設定されている場合だけです。システムが DNS を使用するように設定されていない場合は、utils ldap config ipaddr を使用してください。
utils ldap config ipaddr:このコマンドの使用はお勧めしません。システムで DNS を使用していないか、または DNS を使用するように設定できない場合にだけ、このコマンドを使用してください。システムが DNS を使用するように設定されている場合は utils ldap config fqdn を使用してください。
コマンド特権レベル:1
適用対象:Cisco Unified Communications Manager および Cisco Unity Connection
このコマンドは、utils ldap 設定ステータスを表示します。
utils ldap config status
管理者(admin:)
コマンド特権レベル:0
アップグレード時の使用:可能
utils managementAgent alarms*
プッシュ通知が有効になっている場合は、このコマンドを実行して、Cisco Unified Communications Manager がプッシュ通知アラームをシスコ クラウドに送信する最小アラーム重大度を設定します。
utils managementAgent alarms minpushLevelseverity
パラメータ | 説明 |
---|---|
severity | この値は、Cisco Unified Communications Manager がプッシュ通知アラームをシスコ クラウドに送信する最小アラーム重大度を表します。オプションは次のいずれかです。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager および IM and Presence サービス
プッシュ通知が有効になっている場合は、このコマンドを実行して、Cisco Unified Communications Manager がプッシュ通知アラームをシスコ クラウドに送信する間隔を設定します。
utils managementAgent alarms pushfrequency分
パラメータ | 説明 |
---|---|
分 | アップロード頻度(分単位)。この値は 5 ~ 90 の整数にする必要があります。デフォルトは 30 分です。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager および IM and Presence サービス
プッシュ通知が有効になっている場合は、このコマンドを実行して、次回のスケジュールされたアップロードを待たずに、プッシュ通知アラームをシスコ クラウドにただちに送信します。
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager および IM and Presence サービス
utils network*
このコマンドは、アドレス解決プロトコル テーブルのエントリを削除します。
utils network arp delete ホスト
パラメータ | 説明 |
---|---|
ホスト |
(任意)テーブルから削除するホストのホスト名または IP アドレスを表します。 |
管理者(admin:)
コマンド特権レベル:0
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection。
admin:utils network arp delete myhost
このコマンドは、アドレス解決プロトコル テーブルにエントリを設定します。
utils network arp set { ホスト } { addr }
パラメータ | 説明 |
---|---|
ホスト |
テーブルに追加するホストのホスト名または IP アドレスを表します。 |
addr |
追加するホストのハードウェア アドレス(MAC)を表します。形式は XX:XX:XX:XX:XX:XX です。 |
管理者(admin:)
コマンド特権レベル:0
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection。
admin:utils network arp set myhost 11:22:33:44:55:66
このコマンドは、アドレス解決プロトコル テーブルの内容を一覧表示します。
utils network arp list host hostname [options]
パラメータ | 説明 |
---|---|
host | |
hostname | |
オプション |
|
管理者(admin:)
Flags 列の C はキャッシュ、M は相手先固定、P はパブリッシュの意味です。
コマンド特権レベル:0
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection。
admin:admin: utils network arp listAddress HWtype HWaddress Flags Mask Iface sjc21-3f-hsrp.cisco.com ether 00:00:0C:07:AC:71 C eth0 philly.cisco.com ether 00:D0:B7:85:98:8E C eth0 Entries: 2 Skipped: 0 Found: 2
このコマンドは、指定されたイーサネット インターフェイス上の IP パケットを取得します。
utils network capture eth0 [page] [numeric] [ file | fname ] [ count | num ] [ size | bytes ] [ src | addr ] [ dest | addr ] [ port | num ]
パラメータ | 説明 |
---|---|
eth0 |
イーサネット インターフェイス 0 を指定します。 |
page |
(任意)出力を一度に 1 ページずつ表示します。 page オプションまたは file オプションを使用した場合、コマンドが完了する前に、要求されたすべてのパケットの完全なキャプチャが完了する必要があります。 |
numeric |
(任意)ホストをドット付き IP アドレスとして表示します。 |
file fname |
(任意)情報をファイルに出力します。 file オプションは、情報を platform/cli/fname.cap に保存します。ファイル名には「"."」文字を使用できません。 |
countnum |
(任意)キャプチャするパケット数を設定します。 画面出力の場合、上限は 1000 です。ファイル出力の場合、上限は 10,000 です。 |
sizebytes |
(任意)キャプチャするパケットのバイト数を設定します。 画面出力の場合の最大バイト数は 128 です。ファイル出力の場合の最大バイト数は任意の数または ALL です。 |
src addr |
(任意)パケットの送信元アドレスをホスト名または IPV4 アドレスで指定します。 |
destaddr |
(任意)パケットの宛先アドレスをホスト名または IPV4 アドレスで指定します。 |
portnum |
(任意)パケットの送信元または宛先のポート番号を指定します。 |
管理者(admin:)
コマンド特権レベル:0
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection。
このコマンドは、utils network capture の 100,000 のパケット制限を超えて IP パケットを収集します。
utils network capture-rotate { file | fname } [ size | bytes ] [ sizePerFile | megabytes ] { maxFiles | | num } [ src | addr ] [ dest | addr ] [ port | num ] [ host protocol | addr ]
パラメータ | 説明 | ||
---|---|---|---|
file fname |
情報をファイルに出力します。
|
||
sizebytes |
キャプチャするパケットのバイト数。有効な値は、最大 65535 の任意の数または ALL です。デフォルトは ALL です。 |
||
sizePerFile megabytes |
sizePerFile は、ログ ファイルのサイズの値を設定します(単位は 100 万バイトです)。sizePerFile のデフォルト値は 25 MB です。 |
||
maxFiles num |
maxFiles は、作成されるログ ファイルの最大数を指定します。maxFiles のデフォルト値は 10 です。 |
||
src addr |
(任意)パケットの発信元アドレスをホスト名または IPv4 アドレスとして指定します。 |
||
dest addr |
(任意)パケットの宛先アドレスをホスト名または IPV4 アドレスで指定します。 |
||
port num |
(任意)パケットの送信元または宛先のポート番号を指定します。 |
||
host protocol addr |
(任意)特定のホストと送受信されるトラフィックのみをキャプチャするように制限します。protocol のオプションは IP、arp、rarp、all で、addr は IPv4 またはホスト名形式である必要があります。host を使用する場合は、src または dest は指定しないでください。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection。
このコマンドは、クラスタ内の最初のノード(この接続は後続のノードでのみ有効)とリモート ノードとのノード ネットワーク接続を確認します。
utils network connectivity [ reset ] [hostname/ip address]
管理者(admin:)
コマンド特権レベル:0
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection。
このコマンドは、ホスト名をアドレスに、またはアドレスをホスト名に解決します。
utils network host name [ server | serv ] [page] [detail] [srv]
パラメータ | 説明 |
---|---|
name |
解決するホスト名または IP アドレスを表します。 |
serv |
(任意)代替のドメイン ネーム サーバを指定します。 |
[page] |
(任意)出力を一度に 1 画面ずつ表示します。 |
[detail] |
(任意)詳細なリストを表示します。 |
[srv] |
(任意)DNS SRV レコードを表示します。 |
管理者(admin:)
コマンド特権レベル:0
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection。
このコマンドは、指定されたホスト名または IPv6 アドレスに基づいて、IPv6 ホスト ルックアップ(または IPv6 アドレス ルックアップ)を実行します。
utils network ipv6 host { host_name | ipv6_address }
パラメータ | 説明 |
---|---|
host_name |
サーバの名前を指定します。 |
ipv6_address |
サーバの IPv6 アドレスを指定します。 |
管理者(admin:)
コマンド特権レベル:0
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager および Cisco Unity Connection。
このコマンドを使用すると、IPv6 アドレスまたはホスト名をトレースできます。
utils network ipv6 traceroute [ ipv6-address | hostname ]
パラメータ | 説明 |
---|---|
ipv6-address |
トレースする IPv6 アドレスを指定します。 |
hostname |
トレースするホスト名を指定します。 |
管理者(admin:)
コマンド特権レベル:0
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager および Cisco Unity Connection。
このコマンドを使用すると、IPv6 アドレスまたはホスト名に対して ping を実行できます。
utils network ipv6 ping destination [count]
パラメータ | 説明 |
---|---|
destination |
ping の実行対象として有効な IPv6 アドレスまたはホスト名を指定します。 |
count |
外部のサーバに対する ping の回数を指定します。デフォルトの回数は 4 です。 |
管理者(admin:)
コマンド特権レベル:0
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager および Cisco Unity Connection。
このコマンドは、別のサーバに ping を実行します。
utils network ping destination [count] [size]
パラメータ | 説明 |
---|---|
destination |
ping を行うサーバの IP アドレスまたはホスト名を表します。 |
count |
外部のサーバに対する ping の回数を指定します。デフォルト数は 4 です。 |
size | ping パケットのサイズをバイト単位で指定します。デフォルト値は 56 です。 |
管理者(admin:)
コマンド特権レベル:0
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection。
このコマンドは、リモートの宛先に送信される IP パケットをトレースします。
utils network traceroute [destination]
パラメータ | 説明 |
---|---|
destination |
トレースの送信先のサーバのホスト名または IP アドレスを表します。 |
管理者(admin:)
コマンド特権レベル:0
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection。
このコマンドは、ネーム サービスのキャッシュをクリアします。
utils network name-service {hosts \ services} [cache invalidate]
パラメータ | 説明 |
---|---|
Hosts |
ホストのサービス キャッシュ |
Services |
サービスのサービス キャッシュ |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:不可
admin:utils network name-service hosts cache invalidate admin: Successful
utils ntp*
utils ntp auth symmetric-key { enable | disable | status }
このコマンドを使用して、選択した NTP サーバの認証を有効または無効にできます。認証は対称キー ID およびキーに基づいています。対称キーは、Cisco Unified Communications Manager で暗号化された形式で保存されます。
(注) | このコマンドを実行する前に、NTP サーバのキー ID とそれに対応するキーを把握していることを確認してください。 |
パラメータ | 説明 |
---|---|
enable |
使用可能なサーバのリストから NTP サーバの 1 つを選択し、認証を有効にします。 |
disable |
使用可能なサーバのリストから NTP サーバの 1 つを選択し、認証を無効にします。 |
status |
リストされているすべての NTP サーバの認証ステータスを表示します。 |
NTP サーバの認証用のキー ID または対称キーを入力するように求められます。
(注) |
|
コマンド特権レベル:レベル 1 はすべてのコマンドを実行でき、レベル 0 はステータス コマンドのみを実行できます。
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager
admin:utils ntp auth symmetric-key status 10.77.32.92 : NTP Authentication is disabled. 10.77.46.203 : NTP Authentication is disabled. ind assid status conf reach auth condition last_event cnt ========================================================== 1 8468 963a yes yes none sys.peer sys_peer 3 2 8469 9024 yes yes none reject reachable 2
admin:utils ntp auth symmetric-key enable The List of NTP servers Configured: 1. 10.77.32.92 2. 10.77.46.203 q. press q to exit Enter the selection for which to configure NTP authentication: 1 Please enter the Key ID [1-65534]: 2 Please enter the Symmetric Key of the NTP Server (SHA1): Restarting NTP please run the utils ntp auth symmetric-key status to check the status of NTP Authentication
admin:utils ntp auth symmetric-key status 10.77.46.203 : NTP Authentication is disabled. 10.77.32.92 : NTP Authentication is enabled. ind assid status conf reach auth condition last_event cnt ========================================================= 1 57733 9044 yes yes none reject reachable 4 2 57734 f014 yes yes ok reject reachable 1
admin:utils ntp auth symmetric-key disable The List of NTP servers Configured: 0. All 1. 10.77.46.203 2. 10.77.32.92 q. press q to exit Enter the selection for which to disable NTP authentication: 2 NTP authentication has been disabled on the particular server. Restarting NTP
10.77.46.203 : NTP Authentication is disabled. 10.77.32.92 : NTP Authentication is disabled. ind assid status conf reach auth condition last_event cnt =========================================================== 1 42767 9144 yes yes none falsetick reachable 4 2 42768 912a yes yes none falsetick sys_peer 2
admin:utils ntp auth symmetric-key status 10.77.32.92 : NTP authentication is failed. Please check the NTP authentication Key ID and Symmetric Key entered is correct. To update, disable and reenable authentication for this NTP server. 10.77.32.78 : NTP Authentication is disabled. ind assid status conf reach auth condition last_event cnt =========================================================== 1 31609 c02c yes no bad reject 2 2 31610 803a yes no none reject sys_peer 3
utils ntp server add s1 [ s1 | s2 | s3 | s4 | s5 ] [norestart]
パラメータ | 説明 |
---|---|
s1... |
NTP サーバを指定します。 |
norestart |
サーバを追加した後に NTP サービスが再起動しないようにします。 |
管理者(admin:)
コマンド特権レベル:0
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager
admin: admin:utils ntp server add s1 s2 s3 s4 s5 s6 s7 s8 Incorrect number of parameters entered for add usage: utils ntp server add s1 [s2 s3 s4 s5] [norestart]
admin: utils ntp server add s1 s2 s3 s4 s5 s6 s7 s8 Incorrect number of parameters entered for add usage: utils ntp server add s1 [s2 s3 s4 s5] [norestart]
admin: utils ntp server add clock1.cisco.com clock2.cisco.com clock1.cisco.com : added successfully. clock2.cisco.com : added successfully. Restarting NTP on the server.
admin: utils ntp server add clock1.cisco.com clock2.cisco.com clock1.cisco.com : [The host has already been added as an NTP server.] clock2.cisco.com : [The host has already been added as an NTP server.]
admin: utils ntp server add bglr-ccm26 bglr-ccm26 : [This server cannot be added as an NTP server.]
admin: utils ntp server add clock3.cisco.com clock3.cisco.com : [ Inaccessible NTP server. Not added. ]
admin: utils ntp server add ntp01-syd.cisco.com ntp02-syd.cisco.com clock.cisco.com norestart ntp01-syd.cisco.com : added successfully. ntp02-syd.cisco.com : added successfully. clock.cisco.com : added successfully. The NTP service will need to be restarted for the changes to take effect.
admin:utils ntp server add clock3.cisco.com The maximum permissible limit of 5 NTP servers is already configured.
このコマンドは、設定されている NTP サーバを削除します。
utils ntp server delete
管理者(admin:)
このコマンドは、設定されている NTP サーバのいずれか、またはすべてを削除することができます。削除するサーバを選択すると、NTP サービスを再開するかどうか指定するように求めるプロンプトが表示されます。no を選択した場合、サーバが削除された後に NTP サービスは再起動しません。
コマンド特権レベル:0
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager
admin: utils ntp server delete clock1.cisco.com clock2.cisco.com Incorrect number of optional parameters entered for delete usage: utils ntp server delete
admin: utils ntp server delete 1: clock1.cisco.com 2: clock2.cisco.com 3: ntp01-syd.cisco.com 4: ntp02-syd.cisco.com 5: clock.cisco.com a: all q: quit Choice: 1 Restart NTP (y/n): y clock1.cisco.com will be deleted from the list of configured NTP servers. Continue (y/n)?y clock1.cisco.com : deleted successfully. Restarting NTP on the server.
admin: utils ntp server delete 1: clock1.cisco.com 2: clock2.cisco.com 3: ntp01-syd.cisco.com 4: ntp02-syd.cisco.com 5: clock.cisco.com a: all q: quit Choice: a Restart NTP (y/n): n This will result in all the configured NTP servers being deleted. Continue (y/n)?y clock1.cisco.com : deleted successfully. clock2.cisco.com : deleted successfully. ntp01-syd.cisco.com : deleted successfully. ntp02-syd.cisco.com : deleted successfully. clock.cisco.com : deleted successfully. The NTP service will need to be restarted for the changes to take effect.
admin: utils ntp server delete There are no NTP servers configured to delete.
このコマンドは、NTP クライアントおよびサーバの現在の設定を表示します。
(注) | 発生する可能性のある互換性の問題、精度の問題、およびネットワーク ジッターの問題を回避するには、プライマリ ノードに指定する外部 NTP サーバが NTP v4(バージョン 4)である必要があります。 |
utils ntp config
管理者(admin:)
コマンド特権レベル:0
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サーバ、Cisco Unity Connection
NTP サービスを再起動します。
utils ntp restart
管理者(admin:)
コマンド特権レベル:0
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
このコマンドは、すべての NTP サーバをリスト表示します。
utils ntp server list
管理者(admin:)
コマンド特権レベル:0
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager の IM and Presence サーバ
このコマンドは、NTP サービスが実行中でない場合に、NTP サービスを開始します。
(注) | コマンドライン インターフェイスからは NTP サービスを停止できません。このコマンドは、utils ntp status コマンドで stopped が返される場合に使用します。 |
utils ntp start
管理者(admin:)
コマンド特権レベル:0
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サーバ、および Cisco Unity Connection
このコマンドは、NTP の現在のステータスを表示します。
utils ntp status
管理者(admin:)
コマンド特権レベル:
アップグレード時の使用:
適用対象:Cisco Unified Communications Manager の IM and Presence サービス。
utils os*
このコマンドは、カーネル クラッシュ ダンピング メカニズムを提供するカーネルダンプを設定します。カーネルは、カーネル クラッシュが発生すると、ローカル ディスクにダンプをキャプチャします。
(注) | netdump コマンドはリリース 8.6(1) から削除され、kerneldump コマンドに置き換えられました。 |
utils os kerneldump { enable | disable }
管理者(admin:)
カーネル クラッシュが発生すると、キャプチャ カーネルはサーバのローカル ディスクにコアをダンプします。プライマリ カーネルは、物理メモリに 128MB を予約します。これは、キャプチャ カーネルがブートに使用します。カーネル クラッシュが発生するごとに、カーネルダンプは kexec コマンドを使用してキャプチャ カーネルを起動します。
コマンド特権レベル:0
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager および Cisco Unity Connection
admin: utils os kerneldump enable ***************WARNING******************* Enabling kerneldump requires system reboot Would you like to boot the machine (y/n):y kerneldump enable operation succeeded System going for a reboot
このコマンドは、外部 SSH サーバをイネーブルまたはディセーブルにします。また、外部 SSH サーバのステータスを表示します。
utils os kerneldump ssh { enable | disable | status }
パラメータ | 説明 |
---|---|
enable |
外部 SSH サーバを、カーネルダンプ用のカーネルダンプ サーバに設定します。 |
disable |
カーネルダンプを収集するように設定された外部 SSH サーバのサポートを削除します。 |
status |
カーネルダンプを収集するために外部 SSH サーバが設定されているかどうかを示します。 |
管理者(admin:)
外部 SSH サーバでカーネルダンプ サービスがイネーブルになっていて、カーネル クラッシュが発生した場合は、キャプチャ カーネルが、ダンプを収集するように設定された外部サーバにコアをダンプします。
カーネルダンプをイネーブルまたはディセーブルにした場合は、変更を有効にするためにシステムをリブートする必要があります。
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager および Cisco Unity Connection
admin: utils os kerneldump ssh disable 10.77.31.60 Disabling kerneldump requires system reboot Would you like to continue (y/n): y kerneldump disable operation succeeded System going for a reboot
このコマンドは、kdump サービスのステータスを示します。
utils os kerneldump status
管理者(admin:)
コマンド特権レベル:0
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このコマンドは、SELinux が提供するセキュリティ レベルを指定するために使用します。
utils os secure { enforce | permissive | status }
パラメータ | 説明 |
---|---|
enforce | |
permissive | |
status |
管理者(admin:)
SELinux がレート制限を処理しないことに注意してください。レート制限は ipprefs および IP テーブルによって処理されます。
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager の IM and Presence サービス
utils os secure dynamic-policies*
このコマンドは、ダイナミック ポリシー下で記録された拒否を解決する、SELinux ポリシー モジュールとタイプ強制を生成します。
utils os secure dynamic-policies compile policy name
パラメータ | 説明 |
---|---|
policy name |
SELinux ポリシー モジュールおよびタイプ強制のコンパイルが行われるダイナミック ポリシー名を入力します。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager および Cisco Unified Communications Manager の IM and Presence サービス
このコマンドは、すべてのオペレーティング システムのダイナミック ポリシーとそのステータスのリストを表示します。
utils os secure dynamic-policies list
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager および Cisco Unified Communications Manager の IM and Presence サービス
このコマンドは、ダイナミック ポリシーの SELinux ポリシー モジュールを SELinux にロードします。このコマンドは、新規ルールを SELinux に適用して、ダイナミック ポリシー下で記録された拒否が再発しないようにします。
utils os secure dynamic-policies load policy name
パラメータ | 説明 |
---|---|
policy name |
SELinux ポリシー モジュールを生成したダイナミック ポリシー名を入力します。これは、SELinux にロードされません。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager および Cisco Unified Communications Manager の IM and Presence サービス
このコマンドは、オペレーティング システムからダイナミック ポリシーのすべてのデータを削除します。これには、SELinux からのポリシー モジュールのアンロード、および生成されたポリシー モジュール、タイプ強制、記録された拒否、およびデルタ ログの削除が含まれます。
utils os secure dynamic-policies remove policy name
パラメータ | 説明 |
---|---|
policy name |
必要でない、または不要になったダイナミック ポリシー名を入力します。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager および Cisco Unified Communications Manager の IM and Presence サービス
このコマンドは、生成されたダイナミック ポリシーの SELinux ポリシー モジュールをロードすることで導入するルールを表示します。このコマンドは、ロードされるルールが安全であることを確認するため、コンパイルが成功した後で実行します。
utils os secure dynamic-policies show policy name
パラメータ | 説明 |
---|---|
policy name |
ルールを表示するダイナミック ポリシー名を入力します。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager および Cisco Unified Communications Manager の IM and Presence サービス
このコマンドは、SELinux の拒否の記録を開始し、これらを新しいダイナミック ポリシー下に分類します。
(注) |
|
utils os secure dynamic-policies start-recording policy name
パラメータ | 説明 |
---|---|
policy name |
SELinux の拒否と将来のポリシー データが分類されるダイナミック ポリシー名を入力します。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager および Cisco Unified Communications Manager の IM and Presence サービス
このコマンドは、ダイナミック ポリシーの SELinux の拒否の記録を停止します。このコマンドは、システムを元の強制モード(permissive モードまたは enforcing モード)に戻します。このログは、記録の開始から終了までの間に発生したすべての SELinux の拒否のデルタ ログを生成します。
(注) | デルタ ログに新しい拒否がない場合、このコマンドは失敗します。その後、ダイナミック ポリシーが消去され、このコマンドを再度使用する必要があります。 |
utils os secure dynamic-policies stop-recording policy name
パラメータ | 説明 |
---|---|
policy name |
記録を停止するダイナミック ポリシー名を入力します。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager および Cisco Unified Communications Manager の IM and Presence サービス
utils PlatformWebAccess*
このコマンドは、SSO が有効なときに、Cisco OS 管理アプリケーションおよびディザスタ リカバリ システム アプリケーションへのユーザのサインインを制限するために使用します。
utils PlatformWebAccess disable
管理者(admin:)
コマンド特権レベル:4
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
このコマンドは、Cisco OS 管理アプリケーションおよびディザスタ リカバリ システム アプリケーションへのユーザのサインインを有効にするために使用します。
utils PlatformWebAccess enable
管理者(admin:)
コマンド特権レベル:4
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
このコマンドは、システムの Web アクセスのステータス(Cisco OS 管理アプリケーションおよびディザスタ リカバリ システム アプリケーションでプラットフォーム Web アクセスが有効または無効のいずれになっているか)を表示するために使用します。
utils PlatformWebAccess status
管理者(admin:)
コマンド特権レベル:4
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
utils processCoreDumps*
このコマンドは、プロセス コア ダンプを無効にします。
utils processCoreDumps disable
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このコマンドは、プロセス コア ダンプを有効にします。
utils processCoreDumps enable
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このコマンドは、kdump サービスのステータスを示します。
utils processCoreDumps status
管理者(admin:)
コマンド特権レベル:0
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
utils remote_account*
このコマンドは、リモート アカウントを作成します。
utils remote_account create
管理者(admin:)
リモート アカウントは、パス フレーズを生成します。シスコのサポート担当者はこれを使用することにより、アカウントの指定有効期間の間、システムにアクセスできます。
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このコマンドは、リモート アカウントをディセーブルにすることができます。
utils remote_account disable
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
このコマンドは、リモート アカウントをイネーブルにすることができます。
utils remote_account enable
管理者(admin:)
同時に有効にできるリモート アカウントは 1 つだけです。
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
このコマンドは、リモート アカウントのステータスを確認することができます。
utils remote_account status
管理者(admin:)
コマンド特権レベル:0
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
utils remotesyslog set protocol*
このコマンドは、システムで、リモート syslog サーバとの通信用のプロトコルを TCP に設定します。ノードを再起動して、変更を有効にします。
utils remotesyslog set protocol tcp
管理者(admin:)
コマンド特権レベル:4
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このコマンドは、システムで、リモート syslog サーバとの通信用のプロトコルを UDP に設定します。ノードを再起動して、変更を有効にします。
utils remotesyslog set protocol udp
管理者(admin:)
コマンド特権レベル:4
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このコマンドは、システムで、リモート syslog サーバとの通信用のプロトコルを Transport Layer Security(TLS)1.2 に設定します。TLS 1.2 を使用すると、Cisco Unified Communications Manager および IM and Presence サービスが、syslog サーバとのセキュアな接続を確立できるようになります。これにより、Cisco Unified Communications Manager と IM and Presence サービスがコモン クライテリアのガイドラインに準拠できます。
(注) |
|
ノードを再起動して、変更を有効にします。
utils remotesyslog set protocol tls
管理者(admin:)
コマンド特権レベル:4
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager および Cisco Unified Communications Manager の IM and Presence サービス
セキュリティ証明書を、syslog サーバから Cisco Unified Communications Manager および IM and Presence サービス上の tomcat 信頼ストアにアップロードする必要があります。
このコマンドは、システムでのリモート syslog サーバとの通信用のプロトコルが TCP または UDP のいずれであるかを表示します。
utils remotesyslog show protocol
管理者(admin:)
コマンド特権レベル:0
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このコマンドは、アプリケーション ユーザ インターフェイスの管理者名をリセットします。
utils reset_application_ui_administrator_name
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
このコマンドは、アプリケーション ユーザ インターフェイスの管理者パスワードをリセットします。
utils reset_application_ui_administrator_password
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
このコマンドは、アプリケーション ユーザ インターフェイスの管理者アカウントを復元します。
utils restore_application_ui_administrator_account
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
utils rosters*
データベース パブリッシャ ノードでこのコマンドを実行すると、無効なウォッチャと無効な連絡先の数を取得できます。合計数は CLI に表示されます。
管理者(admin:)
このコマンドはメンテナンス期間中にのみ実行することを推奨します。このコマンドでは数だけが表示され、無効なレコードの詳細は表示されません。無効なレコードの詳細については、utils rosters list [ watchers | contacts | full を試行してください。
コマンド特権レベル:4
アップグレード時の使用:不可
適用対象:IM and Presence サービス
データベース パブリッシャ ノードでこのコマンドを実行すると、すべての無効なウォッチャおよび無効な連絡先の詳細をファイルに書き込むことができます。また、CLI に合計数が表示されます。
管理者(admin:)
このコマンドはメンテナンス期間中にのみ実行することを推奨します。
コマンド特権レベル:4
アップグレード時の使用:不可
適用対象:IM and Presence サービス
データベース パブリッシャ ノードでこのコマンドを実行すると、クラスタ内のすべての無効なウォッチャの詳細をファイルに書き込むことができます。無効な連絡先の合計数も CLI に表示されます。
管理者(admin:)
このコマンドはメンテナンス期間中にのみ実行することを推奨します。実行中は、進行状況が CLI およびログ ファイルに表示されます。
コマンド特権レベル:4
アップグレード時の使用:不可
適用対象:IM and Presence サービス
データベース パブリッシャ ノードでこのコマンドを実行すると、クラスタ内のすべての無効な連絡先の詳細をファイルに書き込むことができます。無効な連絡先の合計数も CLI に表示されます。
管理者(admin:)
このコマンドはメンテナンス期間中にのみ実行することを推奨します。
コマンド特権レベル:4
アップグレード時の使用:不可
適用対象:IM and Presence サービス
このコマンドをデータベース パブリッシャ ノードで実行すると、IM and Presence クラスタ内の無効なウォッチャおよび無効な連絡先をすべて削除できます。
管理者(admin:)
このコマンドはメンテナンス期間中にのみ実行することを推奨します。実行中は、進行状況が CLI およびログ ファイルに表示されます。
コマンド特権レベル:4
アップグレード時の使用:不可
適用対象:IM and Presence サービス
utils scheduled-task*
このコマンドは、スケジュールされたタスクを無効にします。
utils scheduled-task disable scheduled-task
パラメータ | 説明 |
---|---|
scheduled-task |
無効にする必要があるタスクの名前を入力します。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このコマンドは、スケジュールされたタスクを有効にします。
utils scheduled-task enable scheduled-task
パラメータ | 説明 |
---|---|
scheduled-task |
有効にする必要があるタスクの名前を入力します。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このコマンドは、スケジュールされたすべてのタスクを一覧表示します。
utils scheduled-task list
管理者(admin:)
コマンド特権レベル:0
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
utils set urlpattern*
このコマンドは、URL パターンを無効にして、zzz20_product_profile.sh ファイルを変更します。URL パターンを無効化した後、このコマンドは次の行を追加します。
export TOMCAT_EXCLUDE_URLPATTERNS="/ucmuser"
utils set urlpattern disable
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このコマンドは、URL パターンを有効にして、zzz20_product_profile.sh ファイルを変更します。URL パターンを有効化した後、このコマンドは次の行を追加します。
export TOMCAT_EXCLUDE_URLPATTERNS=""
utils set urlpattern enable
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
utils service*
このコマンドは、サービスをアクティブ化、非アクティブ化、開始、停止、または再起動します。
utils service { activate | deactivate | start | stop | restart } service_name
パラメータ | 説明 | ||
---|---|---|---|
service_name |
この一覧はすべてを網羅しているわけではありません。ノードのすべてのサービスをリストするには、utils service list コマンドを入力します。
|
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
このコマンドは、すべてのサービスのリストを取得します。
utils service list [page]
パラメータ | 説明 |
---|---|
[page] |
出力を一度に 1 ページずつ表示します。 |
管理者(admin:)
コマンド特権レベル:0
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager の IM and Presence サービス
このコマンドは、指定したサービスを開始または停止します。
utils service auto-restart { enable | disable | show } service-name
パラメータ | 説明 |
---|---|
enable | 自動再起動を開始します。 |
disable | 自動再起動を停止します。 |
show | サービスのステータスを表示します。 |
service-name | 開始、停止、または表示するサービスの名前を表します。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
このコマンドは、サービスを起動します。
utils service start
パラメータ | 説明 |
---|---|
service |
サービスの名前を入力します。これは、複数の単語を組み合わせることができます。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
このコマンドは、サービスを停止します。
utils service stop
パラメータ | 説明 |
---|---|
service |
サービスの名前を入力します。これは、複数の単語を組み合わせることができます。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
utils snmp*
このインタラクティブ コマンドは、コミュニティ ストリングを追加、削除、リスト表示または更新します。
utils snmp config 1/2c community-string { add | | delete | | list | | update }
パラメータ | 説明 |
---|---|
add |
新しいコミュニティ ストリングを追加します。 |
delete |
コミュニティ ストリングを削除します。 |
list |
すべてのコミュニティ ストリングをリスト表示します。 |
update |
コミュニティ ストリングを更新します。 |
管理者(admin:)
システムによりパラメータの入力が求められます。
設定の変更を有効にするために、SNMP Master Agent サービスが再起動されます。コマンドの実行後は、再起動が完了するまで中止しないでください。サービスの再起動中にコマンドを中止した場合は、utils service list を使用して「SNMP Master Agent」のサービス ステータスを確認します。サービスがダウンしている場合は、utils service start SNMP Master Agent を使用してサービスを開始します。
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このインタラクティブ コマンドは、インフォーム通知の宛先を追加、削除、リスト表示または更新します。
utils snmp config 1/2c inform { add | | delete | | list | | update }
パラメータ | 説明 |
---|---|
add |
通知の宛先を追加します。 |
delete |
通知の宛先を削除します。 |
list |
通知の宛先をすべてリスト表示します。 |
update |
通知の宛先を更新します。 |
管理者(admin:)
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このインタラクティブ コマンドは、トラップ通知に影響を与えます。
utils snmp config 1/2c trap { add | delete | list | update }
パラメータ | 説明 |
---|---|
add |
設定された v1/2c のコミュニティ ストリングに関連付けられた新しい v1/2c トラップ通知の宛先を追加します。 |
delete |
既存の v1/2c トラップ通知の宛先の設定情報を削除します。 |
list |
現在設定されている v1/2c トラップ通知をリスト表示します。 |
update |
既存の v1/2c トラップ通知の宛先の設定情報を更新します。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager および Cisco Unity Connection
このインタラクティブ コマンドは、v3 インフォーム通知に影響を与えます。
utils snmp config 3 inform { add | | delete | | list | | update }
パラメータ | 説明 |
---|---|
add |
設定された v3 ユーザ名に関連付けられた新しい v3 インフォーム通知の宛先を追加します。 |
delete |
既存の v3 インフォーム通知の宛先の設定情報を削除します。 |
list |
現在設定されている v3 インフォーム通知をリスト表示します。 |
update |
既存の v3 インフォーム通知の宛先の設定情報を更新します。 |
管理者(admin:)
システムによりパラメータの入力が求められます。
設定の変更を有効にするために、SNMP Master Agent サービスが再起動されます。コマンドの実行後は、再起動が完了するまで中止しないでください。サービスの再起動中にコマンドを中止した場合は、utils service list を使用して「SNMP Master Agent」のサービス ステータスを確認します。サービスがダウンしている場合は、utils service start SNMP Master Agent を使用してサービスを開始します。
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このインタラクティブ コマンドは、Mib2 設定情報に影響を与えます。
utils snmp config mib2 { add | | delete | | list | | update }
パラメータ | 説明 |
---|---|
add |
Mib2 設定情報を追加します。 |
delete |
Mib2 設定情報を削除します。 |
list |
Mib2 設定情報をリスト表示します。 |
update |
Mib2 設定情報を更新します。 |
管理者(admin:)
システムによりパラメータの入力が求められます。
コマンド特権レベル:0
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このインタラクティブ コマンドは、トラップ通知に影響を与えます。
utils snmp config 3 trap { add | | delete | | list | | update }
パラメータ | 説明 |
---|---|
add |
設定された v3 ユーザ名に関連付けられた新しい v3 トラップ通知の宛先を追加します。 |
delete |
既存の v 3 トラップ通知の宛先の設定情報を削除します。 |
list |
現在設定されている v3 トラップ通知をリスト表示します。 |
update |
既存の v3 トラップ通知の宛先の設定情報を更新します。 |
管理者(admin:)
システムによりパラメータの入力が求められます。
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このインタラクティブ コマンドは、v3 ユーザ設定に影響を与えます。
utils snmp config 3 user { add | | delete | | list | | update }
パラメータ | 説明 |
---|---|
add |
v3 認証とプライバシー パスワードを使用して新しい v3 ユーザを追加します。 |
delete |
既存の v3 ユーザの設定情報を削除します。 |
list |
現在設定されている v3 ユーザをリスト表示します。 |
update |
既存の v3 ユーザの設定情報を更新します。 |
管理者(admin:)
システムによりパラメータの入力が求められます。
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このインタラクティブ コマンドは、指定した MIB OID の指定したバージョンを使用して SNMP データを取得します。
utils snmp get version
パラメータ | 説明 |
---|---|
version |
SNMP バージョンを指定します。指定できる値は、1、2c または 3 です。 |
community |
SNMP コミュニティ ストリングを指定します。 |
ip-address |
サーバの IPv4 または IPv6 アドレスを指定します。ローカル ホストを指定する場合は、127.0.0.0 を入力します。クラスタ内の別のノードの IPv4/IPv6 アドレスを入力し、そのノード上でコマンドを実行できます。 |
オブジェクト |
取得する SNMP オブジェクト ID(OID)を指定します。 |
ファイル |
コマンド出力を保存するファイルを指定します。 |
管理者(admin:)
MIB 内の特定の OID(リーフ)に対してこのコマンドを実行した場合、その MIB の値が得られます。たとえば、システム稼働時間を取得する場合は、iso.3.6.1.2.1.25.1.1.0 = Timeticks: (19836825) 2 days, 7:06:08.25 となります。
リモート ホストの IPv4/IPv6 アドレスを指定すると、コマンドはリモート ホストで実行されます。
IPv4/IPv6 アドレスは必須です。ドメイン名は使用できません。
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このコマンドは、指定した MIB OID のバージョン 1 を使用して、SNMP データを取得します。
utils snmp get 1 version
パラメータ | 説明 |
---|---|
version |
SNMP バージョンを指定します。指定できる値は、1、2c または 3 です。 |
community |
SNMP コミュニティ ストリングを指定します。 |
ip-address |
サーバの IPv4 または IPv6 アドレスを指定します。ローカル ホストを指定する場合は、127.0.0.0 を入力します。クラスタ内の別のノードの IPv4/IPv6 アドレスを入力し、そのノード上でコマンドを実行できます。 |
オブジェクト |
取得する SNMP オブジェクト ID(OID)を指定します。 |
ファイル |
コマンド出力を保存するファイルを指定します。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このコマンドは、指定した MIB OID のバージョン 2c を使用して、SNMP データを取得します。
utils snmp get 2c version
パラメータ | 説明 |
---|---|
version |
SNMP バージョンを指定します。指定できる値は、1、2c または 3 です。 |
community |
SNMP コミュニティ ストリングを指定します。 |
ip-address |
サーバの IPv4 または IPv6 アドレスを指定します。ローカル ホストを指定する場合は、127.0.0.0 を入力します。クラスタ内の別のノードの IPv4/IPv6 アドレスを入力し、そのノード上でコマンドを実行できます。 |
オブジェクト |
取得する SNMP オブジェクト ID(OID)を指定します。 |
ファイル |
コマンド出力を保存するファイルを指定します。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このコマンドは、指定した MIB OID の SNMP データを取得します。
utils snmp get 3 version
パラメータ | 説明 |
---|---|
version |
SNMP バージョンを指定します。指定できる値は、1、2c または 3 です。 |
community |
SNMP コミュニティ ストリングを指定します。 |
ip-address |
サーバの IPv4 または IPv6 アドレスを指定します。ローカル ホストを指定する場合は、127.0.0.0 を入力します。クラスタ内の別のノードの IPv4/IPv6 アドレスを入力し、そのノード上でコマンドを実行できます。 |
オブジェクト |
取得する SNMP オブジェクト ID(OID)を指定します。 |
ファイル |
コマンド出力を保存するファイルを指定します。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このコマンドは、サーバ上の SNMP エージェントに影響を与えます。
utils snmp hardware-agents { status | | start | | stop | | restart }
パラメータ | 説明 | ||
---|---|---|---|
status |
ハードウェア ベンダーによって提供されている SNMP エージェントのステータスを表示します。
|
||
stop |
ハードウェア ベンダーによって提供されているすべての SNMP エージェントを停止します。 |
||
restart |
ハードウェア ベンダーによって提供されているすべての SNMP エージェントを再起動します。 |
||
start |
ハードウェア ベンダーによって提供されているすべての SNMP エージェントを開始します。 |
管理者(admin:)
コマンド特権レベル:0
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このコマンドは、ローカル syslog、リモート syslog にサンプル アラームを送信します。
utils snmp test
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
admin: admin:utils snmp test
Service Manager is running
Test SNMP Trap starts with Local Host Name, Specify a Remote Sever Name to test Remote Syslog
TestAlarmInformational sent [Returncode=0]
TestAlarmEmergency sent [Returncode=0]
TestAlarmAlert sent [returncode=0]
TestAlarmCritical sent [Returncode=0]
TestAlarmDebug sent [Returncode=0]
TestAlarmNotice sent [Returncode=0]
TestAlarmWarning sent [Returncode=0]
TestAlarmError sent [Returncode=0]
TestAlarmWindows sent [Returncode=0]
Message from syslogd@ipcbu-plat44 at Sat Jul 17 03:56:11 2010 ...
ipcbu-plat44 local7 0 : 1: ipcbu-plat44.blr.eng: Jul 16 2010 22:26:11.53 UTC :
%UC_-0-TestAlarmEmergency: %[AppID=Cisco CallManager][ClusterID=][NodeID=ipcbu-plat44]:
Testing EMERGENCY_ALARM
このインタラクティブ コマンドは、指定したバージョンを使用して SNMP MIB をウォークし、指定した OID で開始します。
utils snmp walk version
パラメータ | 説明 |
---|---|
version |
SNMP バージョンを指定します。指定できる値は、1、2c または 3 です。 |
community |
SNMP コミュニティ ストリングを指定します。 |
ip-address |
サーバの IPv4 または IPv6 アドレスを指定します。ローカル ホストを指定する場合は、127.0.0.0 を入力します。クラスタ内の別のノードの IPv4/IPv6 アドレスを入力し、そのノード上でコマンドを実行できます。 |
オブジェクト |
ウォークする SNMP オブジェクト ID(OID)を指定します |
ファイル |
コマンド出力を保存するファイルを指定します。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
iso.3.6.1.2.1.1.1.0 = STRING: "Hardware:7825H, 1 Intel(R) Pentium(R) 4 CPU 3.40GHz, 2048 MB Memory: Software:UCOS 2.0.1.0-62"
iso.3.6.1.2.1.1.2.0 = OID: iso.3.6.1.4.1.9.1.583
iso.3.6.1.2.1.1.3.0 = Timeticks: (15878339) 1 day, 20:06:23.39
iso.3.6.1.2.1.1.4.0 = ""
iso.3.6.1.2.1.1.5.0 = STRING: "bldr-ccm34.cisco.com"
iso.3.6.1.2.1.1.6.0 = ""
iso.3.6.1.2.1.1.7.0 = INTEGER: 72
iso.3.6.1.2.1.2.1.0 = INTEGER: 3
iso.3.6.1.2.1.2.2.1.1.1 = INTEGER: 1
iso.3.6.1.2.1.2.2.1.1.2 = INTEGER: 2
iso.3.6.1.2.1.2.2.1.1.3 = INTEGER: 3
iso.3.6.1.2.1.2.2.1.2.1 = STRING: "lo"
Press <enter> for 1 line, <space> for one page, or <q> to quit
このインタラクティブ コマンドは、指定した OID から、SNMP バージョン 1 を使用して SNMP MIB をウォークします。
utils snmp walk 1 version
パラメータ | 説明 |
---|---|
version |
SNMP バージョンを指定します。指定できる値は、1、2c または 3 です。 |
community |
SNMP コミュニティ ストリングを指定します。 |
ip-address |
サーバの IPv4 または IPv6 アドレスを指定します。ローカル ホストを指定する場合は、127.0.0.0 を入力します。クラスタ内の別のノードの IPv4/IPv6 アドレスを入力し、そのノード上でコマンドを実行できます。 |
オブジェクト |
ウォークする SNMP オブジェクト ID(OID)を指定します |
ファイル |
コマンド出力を保存するファイルを指定します。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このインタラクティブ コマンドは、指定した OID から、SNMP バージョン 2c を使用して SNMP MIB をウォークします。
utils snmp walk 2c version
パラメータ | 説明 |
---|---|
version |
SNMP バージョンを指定します。指定できる値は、1、2c または 3 です。 |
community |
SNMP コミュニティ ストリングを指定します。 |
ip-address |
サーバの IPv4 または IPv6 アドレスを指定します。ローカル ホストを指定する場合は、127.0.0.0 を入力します。クラスタ内の別のノードの IPv4/IPv6 アドレスを入力し、そのノード上でコマンドを実行できます。 |
オブジェクト |
ウォークする SNMP オブジェクト ID(OID)を指定します |
ファイル |
コマンド出力を保存するファイルを指定します。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このインタラクティブ コマンドは、指定した OID から、SNMP MIB をウォークします。
utils snmp walk 3 version
パラメータ | 説明 |
---|---|
version |
SNMP バージョンを指定します。指定できる値は、1、2c または 3 です。 |
community |
SNMP コミュニティ ストリングを指定します。 |
オブジェクト |
ウォークする SNMP オブジェクト ID(OID)を指定します |
ip-address |
サーバの IPv4 または IPv6 アドレスを指定します。ローカル ホストを指定する場合は、127.0.0.0 を入力します。クラスタ内の別のノードの IPv4/IPv6 アドレスを入力し、そのノード上でコマンドを実行できます。 |
ファイル |
コマンド出力を保存するファイルを指定します。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このコマンドは、リモート サーバ上でいくつかのテスト ケースを実行します。
utils soap realtimeservice test [remote-ip] remote-httpsremote https-password
パラメータ | 説明 |
---|---|
remote-ip | テスト対象となるサーバの IP アドレスを指定します。 |
remote-https-user | SOAP API にアクセス権のあるユーザ名を指定します。 |
remote-https-password | SOAP API にアクセス権のあるアカウントのパスワードを指定します。 |
管理者(admin:)
コマンド特権レベル:0
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、IM and Presence の IM and Presence サービス、Cisco Unity Connection
utils sso*
このコマンドは、SAML SSO 認証に関する情報を提供します。
utils sso { enable | disable | status }
パラメータ | 説明 |
---|---|
enable |
SAML SSO をイネーブルにできる Cisco Unified CM 管理の場所を提供します。 |
disable |
SAML SSO ベースの認証をディセーブルにします。 |
status |
SAML SSO のステータスを表示します。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
Admin: utils sso enable *** W A R N I N G *** SSO cannot be enabled using CLI command ======================================================= To enable Cluster wide SAML SSO please access Cisco Unified CM Administration Page->System->SAML Single Sign On =======================================================
このコマンドは、SAML SSO ベースの認証のリカバリ URL をイネーブルまたはディセーブルにします。
utils sso recovery-url { enable | disable }
パラメータ | 説明 |
---|---|
enable |
SAML SSO ベースの認証のリカバリ URL をイネーブルにします。 |
disable |
SAML SSO ベースの認証のリカバリ URL をディセーブルにします。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:可能
適用対象:Unified Communications Manager、Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection。
utils system*
このコマンドは、同じパーティションでシステムを再起動することができます。
utils system restart
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このコマンドは、システムをシャットダウンすることができます。
utils system shutdown
管理者(admin:)
このコマンドは、5 分でタイムアウトします。システムが 5 分以内にシャットダウンしない場合は、強制シャットダウンを実行するオプションが提示されます。
注意 | 仮想マシンからサーバのシャットダウンおよび再起動が強制されると、ファイル システムが破損する可能性があります。 |
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
このコマンドは、非アクティブなパーティションでシステムを再起動することができます。
utils system switch-version
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
このコマンドは、システム ブート出力の送信先をリダイレクトします。
utils system boot { console | serial }
パラメータ | 説明 |
---|---|
console |
システム ブート出力がコンソールにリダイレクトされます。 |
serial |
システム ブート出力が COM1(シリアル ポート 1)にリダイレクトされます。 |
管理者(admin:)
コマンド特権レベル:0
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager および Cisco Unity Connection
このコマンドを使用すると、アップグレードおよび Cisco Option Package(COP)ファイルを、ローカルとリモートの両方のディレクトリからインストールできます。
utils system upgrade { initiate | cancel | status }
パラメータ | 説明 |
---|---|
cancel |
アクティブなアップグレードをキャンセルします。 |
initiate |
新しいアップグレード ウィザードを開始するか、既存のアップグレード ウィザードを制御します。ウィザードによりアップグレード ファイルの場所を入力するよう求められます。 |
status |
アップグレードのステータスを表示します。 |
管理者(admin:)
コマンド特権レベル:0
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection
アップグレード中には設定の変更が許可されませんが、このコマンドを使用すると、アップグレード中に緊急プロビジョニングを有効化にできます。
utils system enableAdministration
管理者(admin:)
コマンド特権レベル:1 および 4
このコマンドは、今年の夏時間(DST)ルールを更新します。
utils update dst
管理者(admin:)
このコマンドは、既存の DST ルール ファイルのバックアップを取り、今年を対象とした新しい DST ルール ファイルを作成します。
注意 | このコマンドを実行した後は、電話機を再起動します。電話機を再起動しないと、誤った DST の開始日および終了日になります。 |
コマンド特権レベル:0
アップグレード時の使用:不可
適用対象:Unified Communications Manager および IM and Presence サービス。
このコマンドは、展開環境のすべてのノードとクラスタでユーザ レコードをチェックし、重複しているか、無効なユーザ ID やディレクトリ URI の値を識別します。
utils users validate { all | userid | uri }
パラメータ | 説明 |
---|---|
all |
ノードおよびクラスタ内のすべてのユーザのユーザ ID およびディレクトリ URI の値を検証します。 |
userid |
ノードおよびクラスタ内のすべてのユーザのユーザ ID の値を検証します。 |
uri |
ノードおよびクラスタ内のすべてのユーザのディレクトリ URI の値を検証します。 |
管理者(admin:)
コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Cisco Unified Communications Manager の IM and Presence サービス
utils vmtools*
このコマンドは、現在インストールされている VMware ツールを、その VM 用の ESXi ホストによって指示されている最新バージョンに更新します。
(注) | 最初のリブート後、VMware ツールは稼働状態になっています。VMware ツールの新しいバージョンにアップグレードした場合、SELinux によりインストールがブロックされることがあります。この場合、システムでは VMware ツールにインストールを許可していますが、それ以上の SELinux によるブロックを抑制する新しいダイナミック ポリシーが生成されます。新しいダイナミック ポリシーは、utils os secure dynamic-policies list コマンドを使用して表示できます。詳細については、utils os secure dynamic-policies CLI コマンドを参照してください。 |
utils vmtools refresh
管理者(admin:)
VMware ツールの現在のバージョンを更新するには、
を選択します。コマンド特権レベル:1
アップグレード時の使用:不可
適用対象:Unified Communications Manager、Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection。
admin:utils vmtools refresh VMware Tools match host. Upgrade allowed, though not required. *** W A R N I N G *** Running this command will update your current version of VMware Tools to the latest version prescribed by the ESXi host on which this VM is running. The tools install will cause your system to reboot twice.
現在インストールされている VMware Tools を、その VM 用の ESXi ホストによって指示されている最新版に更新します。
utils vmtools upgrade
管理者(admin:)
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、および Cisco Unity Connection
このコマンドは、システム ブート メッセージの送信先の場所を表示します。この場所は、コンソールまたはシリアル ポート 1 のいずれかです。
utils system boot status
管理者(admin:)
コマンド特権レベル:0
アップグレード時の使用:可能
適用対象:Cisco Unified Communications Manager、Cisco Unified Communications Manager の IM and Presence サービス、Cisco Unity Connection