この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
CAR を使用してレポートの生成を開始する前に、システムを設定する必要があります。
次の表に、自動生成をイネーブルまたはディセーブルにするレポートのリスト、レポート生成間隔、およびレポートの受信者を示します。
(注) | ゲートウェイ、ルート グループ、ルート リスト、およびルート パターンが多数ある大規模な構成では、すべての使用状況レポート(ゲートウェイ使用状況、回線グループ使用状況、ルート グループ使用状況、ルート リスト使用状況、およびルート パターン使用状況)をイネーブルにすると、システムの CPU 使用率が上昇し、レポートの生成時間が長くなります。また、システムのパフォーマンスにも影響します。自動生成は、ゲートウェイ使用状況についてのみイネーブルにすることを推奨します。これは、通常、大規模なシステムでもゲートウェイの数は少ないためです。どの使用状況レポートも、5 個以下のゲートウェイ、ルート グループ、ルート リスト、またはルート グループを選択して、すべてオンデマンドで生成できます。 |
レポートを自動生成するプロセスは、次の 2 つの手順で構成されます。
CAR は、さまざまなイベントについて電子メール アラートを提供します。システムで電子メール アラートをイネーブルにするプロセスは、2 つの手順で構成されます。
この項では、1 つまたはすべてのレポートの自動生成をイネーブルまたはディセーブルにする方法について説明します。また、レポート パラメータをカスタマイズしてメーリング オプションをイネーブルにすることで、レポートが作成されたときにそれらを電子メールで送信することもできます。レポートをメール送信する場合、CAR は、CAR 管理者のメール ID と [メールパラメータ(Mail Parameters)] ウィンドウで設定されたメール ドメインを使用して電子メール アドレスを生成します。つまり、メール アドレスは <CAR 管理者のメール ID> @ <[メールパラメータ(Mail Parameters)] ウィンドウで設定されたドメイン> になります。
Cisco Unified Communications Manager のすべての新しいインストールに対して、最初に、自動生成についての電子メール アラートとレポートを有効にしておく必要があります。すべてのレポートおよびアラートのデフォルトのステータスは「無効(Disabled)」です。
すべての Cisco Unified Communications Manager は Release 5.x から新しい Cisco Unified Communications Manager リリースにアップグレードするため、tbl_pregenmail_option テーブルのデータは、CAR Scheduler サービスがアクティブな場合に限り移行されます。
それ以外のバージョンの Cisco Unified Communications Manager にアップグレードする場合は、システム リソースを節約するために、アップグレードの処理中はすべてのレポートおよびアラートをディセーブルにしてください。アップグレード完了後には、レポートおよびアラートをイネーブルにすることを忘れないでください。
デフォルトでイネーブルになるレポートについては、レポート生成スケジュールで説明しています。
ステップ 1 |
を選択します。 [レポートの自動作成/警告オプション(Automatic Report Generation/Alert Option)] ウィンドウが表示されます。 | ||
ステップ 2 | [レポート[レポートの作成間隔](Reports [Report Generation Interval])] ボックスで、システム スケジューラで定義したスケジュールに基づいて自動生成するレポートを選択します。CAR システム スケジューラを参照してください。 | ||
ステップ 3 | [ステータス(Status)] フィールドで、[有効(Enabled)] または [無効(Disabled)] を選択します。 | ||
ステップ 4 | レポートをカスタマイズする、または生成されたレポートを電子メールで送信するには、[パラメータのカスタマイズ(Customize Parameters)] ボタンをクリックします。
[パラメータのカスタマイズ(Customize Parameters)] ウィンドウが表示されます。
| ||
ステップ 5 | メールで送信するレポートのタイプに応じて、[CSV] オプション ボタンまたは [PDF] オプション ボタンを選択します。 | ||
ステップ 6 | レポートがすべての CAR 管理者に電子メールで送信されるようにするには、[メール送信オプション(Mailing Option)] チェックボックスをオンにします。 | ||
ステップ 7 | 指定した値を保存するには、[更新(Update)] ボタンをクリックします。
[パラメータのカスタマイズ(Customize Parameters)] ウィンドウが閉じます。 | ||
ステップ 8 | 他のレポートをイネーブルにする、またはカスタマイズするには、前の手順を繰り返して行ってください。 | ||
ステップ 9 | [更新(Update)] ボタンをクリックします。
変更内容は、午前 0 時に有効になります。CAR Scheduler サービスを一旦停止し再起動すると、変更内容をすぐに有効にできます。 |
2 種類の電子メールによるアラートを使用できます。これらのアラートは、次のとおりです。
これらのアラートを設定する方法については、通知限度の設定を参照してください。