V.110 모드에서 Cisco 3640 라우터와 원격 사용자 간 콜백

다운로드 옵션

  • PDF     (245.1 KB)
    다양한 디바이스에서 Adobe Reader로 보기
  • ePub     (93.8 KB)
    iPhone, iPad, Android, Sony Reader 또는 Windows Phone의 다양한 앱에서 보기
  • Mobi (Kindle)     (112.4 KB)
    Kindle 디바이스에서 보기 또는 다양한 디바이스의 Kindle 앱에서 보기
업데이트:2005년 9월 14일
문서 ID:6153

편견 없는 언어

본 제품에 대한 문서 세트는 편견 없는 언어를 사용하기 위해 노력합니다. 본 설명서 세트의 목적상, 편견 없는 언어는 나이, 장애, 성별, 인종 정체성, 민족 정체성, 성적 지향성, 사회 경제적 지위 및 교차성에 기초한 차별을 의미하지 않는 언어로 정의됩니다. 제품 소프트웨어의 사용자 인터페이스에서 하드코딩된 언어, RFP 설명서에 기초한 언어 또는 참조된 서드파티 제품에서 사용하는 언어로 인해 설명서에 예외가 있을 수 있습니다. 시스코에서 어떤 방식으로 포용적인 언어를 사용하고 있는지 자세히 알아보세요.

이 번역에 관하여

Cisco는 전 세계 사용자에게 다양한 언어로 지원 콘텐츠를 제공하기 위해 기계 번역 기술과 수작업 번역을 병행하여 이 문서를 번역했습니다. 아무리 품질이 높은 기계 번역이라도 전문 번역가의 번역 결과물만큼 정확하지는 않습니다. Cisco Systems, Inc.는 이 같은 번역에 대해 어떠한 책임도 지지 않으며 항상 원본 영문 문서(링크 제공됨)를 참조할 것을 권장합니다.

소개

이 문서에서는 다음 방법 중 하나를 사용하여 전화를 거는 원격 사용자에 대한 샘플 컨피그레이션을 제공합니다. 각 경우 콜백은 V.110 통화를 사용하여 수행됩니다.

  • GSM을 통해 3640에 연결하고 콜백을 요청하는 사용자

  • 모뎀을 통해 3640을 연결하고 콜백을 요청하는 사용자

  • ISDN(데이터)을 통해 3640에 연결하고 콜백을 요청하는 사용자.

참고: AAA(Authentication, authorization, and accounting)는 기본적으로 라우터에 구성됩니다. 또한 로그인할 사용자를 만들어야 합니다.

이 예에서는 통화 및 콜아웃에 대해 PPP(Point-to-Point Protocol) 인증도 설정했습니다. V.110용 모뎀을 항상 구성하고 사용자가 방법(모뎀 또는 GSM)을 선택할 수 있도록 스크립트를 변경했습니다. 선택한 방법에 따라 사용자는 다음을 수행해야 합니다.

  • 콜백 번호(모뎀용)에서 ZDTxxx를 사용합니다.

  • 콜백 번호(GSM용)에 DIxxxx를 사용합니다.

사전 요구 사항

요구 사항

이 문서에 대한 특정 요건이 없습니다.

사용되는 구성 요소

이 문서의 정보는 다음 소프트웨어 및 하드웨어 버전을 기반으로 합니다.

  • V.110 콜백 기능은 Rosa IOS에서 사용할 수 있습니까? 소프트웨어 릴리스 12.2(5.2)T 이상

  • 모뎀 소프트웨어 버전 2.7.3.0.

이 문서의 정보는 특정 랩 환경의 디바이스를 토대로 작성되었습니다. 이 문서에 사용된 모든 디바이스는 초기화된(기본) 컨피그레이션으로 시작되었습니다. 현재 네트워크가 작동 중인 경우, 모든 명령어의 잠재적인 영향을 미리 숙지하시기 바랍니다.

표기 규칙

문서 표기 규칙에 대한 자세한 내용은 Cisco 기술 팁 표기 규칙을 참조하십시오.

구성

이 섹션에는 이 문서에서 설명하는 기능을 구성하기 위한 정보가 표시됩니다.

참고: 이 문서에 사용된 명령에 대한 추가 정보를 찾으려면 명령 조회 도구(등록된 고객만 해당)를 사용합니다.

네트워크 다이어그램

이 문서에서는 이 다이어그램에 표시된 네트워크 설정을 사용합니다.

callback_6153.gif

구성

이 문서에서는 다음 구성을 사용합니다.

  • 수잔

수잔 
suzanne#show running-config
! 
version 12.2 
service internal
!
hostname suzanne
!
aaa new-model
!
aaa authentication login default local
aaa authentication ppp default local
aaa authorization network default local 
aaa session-id common 
!
username ww password 0 
username alainisdn password 0 
username alaingsm callback-dialstring "" password 0
username alainmod callback-dialstring "" password 0 
!
modem country mica belgium 
! 
isdn switch-type primary-net5
isdn voice-call-failure 0
chat-script offhook "" "ATH1" OK
chat-script callback ABORT ERROR ABORT BUSY "" "AT&F" 
OK "ATX3DT \T" TIMEOUT 90 \c
chat-script callback1analog ABORT ERROR ABORT BUSY "" "AT&F" 
OK "ATDT \T" TIMEOUT 90 CONNECT \c
chat-script callback2gsm ABORT ERROR ABORT BUSY "" "AT&F" 
OK "ATS29=8" OK "AT \T" TIMEOUT 90 CONNECT \c
!
controller E1 1/0
pri-group timeslots 1-31
!
interface Ethernet0/0
ip address 172.17.243.105 255.255.255.0
!
interface Serial1/0:15
description E1 0451/39920
no ip address
encapsulation ppp
dialer rotary-group 1
isdn switch-type primary-net5
isdn incoming-voice modem
isdn outgoing-voice info-transfer-capability 3.1kHz-audio
no cdp enable
ppp authentication chap callin 
!
interface BRI3/1
description belgacom 027202094
no ip address
encapsulation ppp
isdn switch-type basic-net3
isdn incoming-voice modem
no cdp enable
! 
interface Group-Async1
ip unnumbered Dialer1
encapsulation ppp
dialer in-band
dialer callback-secure
dialer-group 1
async dynamic routing
async mode interactive
peer default ip address pool pool
ppp callback accept
ppp authentication pap
group-range 65 94
!
interface Dialer1
description Dial-In User
ip address 172.31.1.1 255.255.0.0
ip helper-address 90.100.48.38
ip helper-address 90.100.60.202
encapsulation ppp
dialer in-band
dialer callback-secure
dialer map ip 172.31.1.2 name alainisdn class callback 6136
peer default ip address pool pool
no cdp enable
ppp callback accept
ppp authentication chap callin 
!
map-class dialer callback
dialer callback-server username
dialer-list 1 protocol ip permit
!
line con 0
exec-timeout 0 0
password
line 65 94
script dialer callback2gsm
script callback callback2gsm
modem InOut
transport input telnet
transport output pad v120 lapb-ta telnet rlogin udptn
autoselect during-login
autoselect ppp
stopbits 1
flowcontrol hardware
line aux 0
password
line vty 0 4
exec-timeout 0 0
password 
!
end

다음을 확인합니다.

이 섹션에서는 컨피그레이션이 제대로 작동하는지 확인하는 데 사용할 수 있는 정보를 제공합니다.

일부 show 명령은 출력 인터프리터 툴 에서 지원되는데(등록된 고객만), 이 툴을 사용하면 show 명령 출력의 분석 결과를 볼 수 있습니다.

  • show ip route??는 IP 라우팅 테이블의 내용을 표시합니다.

문제 해결

이 섹션에서는 컨피그레이션 문제를 해결하는 데 사용할 수 있는 정보를 제공합니다.

참고: debug 명령을 실행하기 전에 디버그 명령에 대한 중요 정보를 참조하십시오.

  • 디버그 모뎀 - 액세스 서버에서 모뎀 회선 활동을 관찰합니다.

  • debug dialer events —다이얼러 인터페이스에서 수신된 패킷에 대한 디버깅 정보를 표시합니다.

  • debug ppp authentication —CHAP(Challenge Authentication Protocol) 패킷 교환 및 PAP(Password Authentication Protocol) 교환을 비롯한 인증 프로토콜 메시지를 표시합니다.

  • debug ppp cbcp —MSCB(Microsoft Callback Control Protocol)를 사용하여 PPP 연결 협상과 관련된 프로토콜 오류 및 통계를 표시합니다.

  • debug ISDN Q931 —로컬 라우터(사용자측)와 네트워크 간의 ISDN 네트워크 연결(레이어 3)의 통화 설정 및 해제 정보를 표시합니다.

  • debug chat - 채팅 스크립트가 제대로 작동하는지 확인합니다.

  • 디버그 콜백 - 라우터가 모뎀을 사용할 때 콜백 이벤트를 표시하고 채팅 스크립트를 사용하여 터미널 회선에서 다시 전화를 걸 경우 콜백 이벤트를 표시합니다.

디버그 출력 샘플

V.110을 사용한 GSM 콜백 

suzanne#
01:03:00: ISDN BR3/1: RX <- SETUP pd = 8 callref = 0x2F
01:03:00: Sending Complete
01:03:00: Bearer Capability i = 0x9090A3
01:03:00: Channel ID i = 0x89
01:03:00: Calling Party Number i = 0x21, 0x83, '478681006', Plan:ISDN, 
Type:National
01:03:00: Called Party Number i = 0xA1, '27202094', Plan:ISDN, Type:National
01:03:00: ISDN BR3/1: Event: Received a VOICE call from 478681006 on B1 at 64 Kb/s
01:03:00: ISDN BR3/1: Event: Accepting the call id 0x19
01:03:00: %ISDN-6-LAYER2UP: Layer 2 for Interface BR3/1, TEI 70 changed to up
01:03:00: ISDN BR3/1: TX -> CALL_PROC pd = 8 callref = 0xAF
01:03:00: Channel ID i = 0x89
01:03:00: ISDN BR3/1: TX -> ALERTING pd = 8 callref = 0xAF
01:03:00: ISDN BR3/1: TX -> CONNECT pd = 8 callref = 0xAF
01:03:01: ISDN BR3/1: RX <- CONNECT_ACK pd = 8 callref = 0x2F
01:03:01: Modem 2/12 Mica: configured for Answer mode, 
with Null signaling,0x0 tone detection.
01:03:01: Modem 2/12 Mica: in modem state CALL_SETUP
01:03:02: Modem 2/12 Mica: in modem state CONNECT
01:03:06: Modem 2/12 Mica: in modem state LINK
01:03:07: %ISDN-6-CONNECT: Interface BRI3/1:1 is now connected to 478681006    
01:03:15: Modem 2/12 Mica: in modem state TRAINUP
01:03:17: Modem 2/12 Mica: in modem state EC_NEGOTIATING
01:03:18: Modem 2/12 Mica: in modem state STEADY
01:03:18: Modem 2/12 Mica: CONNECT at 31200/31200 (Tx/Rx), V34+, LAPM, None
01:03:19: TTY77: DSR came up
01:03:19: tty77: Modem: IDLE->(unknown)
01:03:19: TTY77: EXEC creation
01:03:19: TTY77: set timer type 10, 30 seconds
01:03:19: TTY77: Autoselect(2) sample 7E
01:03:19: TTY77: Autoselect(2) sample 7EFF
01:03:19: TTY77: Autoselect(2) sample 7EFF7D
01:03:19: TTY77: Autoselect(2) sample 7EFF7D23
01:03:19: TTY77 Autoselect cmd: ppp negotiate
01:03:19: TTY77: EXEC creation
01:03:19: TTY77: create timer type 1, 600 seconds
01:03:19: TTY77: destroy timer type 1
01:03:19: TTY77: no timer type 0 to destroy
01:03:19: As77 DDR: Dialer received incoming call from <unknown>
01:03:21: %LINK-3-UPDOWN: Interface Async77, changed state to up
01:03:21: As77 DDR: Dialer statechange to up
01:03:21: As77 DDR: Dialer received incoming call from <unknown>
01:03:21: As77 PPP: Treating connection as a callin
01:03:21: As77 PPP: Authorization required
01:03:22: Modem 2/12 Mica: PPP escape_map: Tx map = FFFFFFFF, Rx map = 0
01:03:22: As77 PPP: Authorization required
01:03:27: Modem 2/12 Mica: PPP escape_map: Tx map = A0000, Rx map = 0
01:03:27: As77 MCB: Initialize
01:03:27: MCB: Flush
01:03:27: Modem 2/12 Mica: Bad RX Frame: control = 0xE007, length = 0xD, 
buffer = 0x3BC6E54
01:03:30: As77 PAP: I AUTH-REQ id 2 len 16 from "alaingsm"
01:03:30: As77 PAP: Authenticating peer alaingsm
01:03:30: As77 PPP: Sent PAP LOGIN Request to AAA
01:03:30: As77 PPP: Received LOGIN Response from AAA = PASS
01:03:30: As77 DDR: Remote name for alaingsm
01:03:30: As77 DDR: Authenticated host alaingsm with no matching dialer map
01:03:30: As77 PAP: O AUTH-ACK id 2 len 5
01:03:30: As77 MCB: Start
01:03:30: As77 MCB: User alaingsm Callback Number - Client ANY
01:03:30: As77 MCB: Newstate 0-INIT -> 2-WAIT_RESPONSE
01:03:30: As77 MCB: O Request Id 1 Callback Type Client-Num delay 0
01:03:32: As77 MCB: Timeout in state WAIT_RESPONSE sending new Request 2
01:03:32: As77 MCB: O Request Id 2 Callback Type Client-Num delay 0
01:03:34: As77 MCB: Timeout in state WAIT_RESPONSE sending new Request 3
01:03:34: As77 MCB: O Request Id 3 Callback Type Client-Num delay 0
01:03:35: Async77 PPP: I MCB Response(2) id 1 len 22
01:03:35: Async77 MCB: 
I 2 1 0 16 2 12 F 1 44 49 30 30 34 37 38 36 38 31 30 30 36 0 
01:03:35: As77 MCB: Received response
01:03:35: As77 MCB: Resp ignored. ID Expected 3, got id 1
01:03:36: As77 MCB: Timeout in state WAIT_RESPONSE sending new Request 4
01:03:36: As77 MCB: O Request Id 4 Callback Type Client-Num delay 0
01:03:36: Async77 PPP: I MCB Response(2) id 4 len 22
01:03:36: Async77 MCB: 
I 2 4 0 16 2 12 F 1 44 49 30 30 34 37 38 36 38 31 30 30 36 0 
01:03:36: As77 MCB: Received response   


!--- You can see here that "DI00478681006" was entered at the user PC.
  
01:03:36: As77 MCB: Response CBK-Client-Num 2 18 15, addr 1-DI00478681006
01:03:36: As77 MCB: O Ack Id 5 Callback Type Client-Num delay 15
01:03:36: As77 MCB: Negotiated MCB with peer
01:03:36: As77 MCB: Newstate 2-WAIT_RESPONSE -> 3-WAIT_TERMINATE
01:03:37: As77 MCB: Peer terminating the link
01:03:37: As77 MCB: Newstate 3-WAIT_TERMINATE -> 5-WAIT_LINKDOWN
01:03:37: As77 MCB: Link terminated by peer, Callback Needed
01:03:37: As77 MCB: Newstate 5-WAIT_LINKDOWN -> 6-CALLING
01:03:37: As77 MCB: Initiate Callback for ^->o`iB@ at DI00478681006 
using Async DDR
01:03:37: As77 DDR: PPP callback Callback server starting to alaingsm 
DI00478681006
01:03:37: As77 MCB: Dialer callback started

  
!--- Call is disconnected.


01:03:38: Modem 2/12 Mica: in modem state SS_RETRAINING
01:03:38: ISDN BR3/1: RX <- DISCONNECT pd = 8 callref = 0x2F
01:03:38: Cause i = 0x8090 - Normal call clearing
01:03:38: Progress Ind i = 0x8088 - In-band info or appropriate now available    
01:03:38: %ISDN-6-DISCONNECT: Interface BRI3/1:1 disconnected from 478681006, 
call lasted 37 seconds
01:03:38: ISDN BR3/1: TX -> RELEASE pd = 8 callref = 0xAF
01:03:38: Cause i = 0x8090 - Normal call clearing
01:03:38: Modem 2/12 Mica: in modem state TERMINATING
01:03:38: ISDN BR3/1: RX <- RELEASE_COMP pd = 8 callref = 0x2F
01:03:39: TTY77: Async Int reset: Dropping DTR
01:03:39: Modem 2/12 Mica: PPP escape_map: Tx map = FFFFFFFF, Rx map = 0
01:03:39: As77 PPP: Authorization required
01:03:40: Modem 2/12 Mica: in modem state IDLE
01:03:40: Modem 2/12 Mica: DISCONNECT after 00:00:38, due to reason (0xDF00) 
Host Disconnect.
01:03:40: TTY77: DSR was dropped
01:03:40: tty77: Modem: READY->(unknown)
01:03:41: TTY77: dropping DTR, hanging up
01:03:41: tty77: Modem: HANGUP->(unknown)
01:03:41: %LINK-5-CHANGED: Interface Async77, changed state to reset
01:03:42: TTY77: cleanup pending. Delaying DTR
01:03:43: TTY77: cleanup pending. Delaying DTR
01:03:44: TTY77: cleanup pending. Delaying DTR
01:03:44: TTY77: no timer type 0 to destroy
01:03:44: TTY77: no timer type 1 to destroy
01:03:44: TTY77: no timer type 3 to destroy
01:03:44: TTY77: no timer type 4 to destroy
01:03:44: TTY77: no timer type 2 to destroy
01:03:44: Async77: allowing modem_process to continue hangup
01:03:45: TTY77: restoring DTR
01:03:46: %LINK-3-UPDOWN: Interface Async77, changed state to down
01:03:53: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR3/1, TEI 70 
changed to down

!--- Callback is started.

01:03:56: As77 DDR: re-enable timeout
01:03:56: DDR: callback triggered by dialer_timers
01:03:56: As77 DDR: beginning callback to alaingsm DI00478681006
01:03:56: As77 DDR: Attempting to dial DI00478681006
01:03:56: CHAT77: Attempting async line dialer script
01:03:56: CHAT77: Dialing using Modem script: callback2gsm & System script: 
none
01:03:56: CHAT77: process started
01:03:56: CHAT77: Asserting DTR
01:03:56: CHAT77: Chat script callback2gsm started
01:03:56: CHAT77: Sending string: AT&F
01:03:56: CHAT77: Expecting string: OK
01:03:56: CHAT77: Completed match for expect: OK
01:03:56: CHAT77: Sending string: ATS29=8
01:03:56: CHAT77: Expecting string: OK 
01:03:56: CHAT77: Completed match for expect: OK

!--- We send DI00478681006

01:03:56: CHAT77: Sending string: AT \T<DI00478681006>
01:03:56: CHAT77: Expecting string: CONNECT
01:03:56: Modem 2/12 Mica: configured for Originate mode, with Null signaling, 
0x1 tone detection.
01:03:56: Modem 2/12 Mica: received dialstring 00478681006
01:03:56: ISDN Se1/0:15: TX -> SETUP pd = 8 callref = 0x000E
01:03:56: Bearer Capability i = 0x8890214846BB
01:03:56: Channel ID i = 0xA9839F
01:03:56: Called Party Number i = 0x81, '00478681006', Plan:ISDN, Type:Unknown
01:03:56: Low Layer Compat i = 0x8890214846BB
01:03:56: ISDN Se1/0:15: RX <- CALL_PROC pd = 8 callref = 0x800E
01:03:56: Channel ID i = 0xA9839F
01:03:56: Modem 2/12 Mica: in modem state CALL_SETUP
01:04:02: ISDN Se1/0:15: RX <- ALERTING pd = 8 callref = 0x800E
01:04:03: ISDN Se1/0:15: RX <- CONNECT pd = 8 callref = 0x800E
01:04:03: ISDN Se1/0:15: TX -> CONNECT_ACK pd = 8 callref = 0x000E
01:04:03: Modem 2/12 Mica: in modem state CONNECT
01:04:03: Modem 2/12 Mica: in modem state LINK
01:04:03: Modem 2/12 Mica: in modem state TRAINUP
01:04:03: Modem 2/12 Mica: in modem state EC_NEGOTIATING
01:04:03: Modem 2/12 Mica: in modem state STEADY
01:04:03: CHAT77: Completed match for expect: CONNECT
01:04:03: CHAT77: Sending string: \c
01:04:03: CHAT77: Chat script callback2gsm finished, status = Success
01:04:03: TTY77: no timer type 1 to destroy
01:04:03: TTY77: no timer type 0 to destroy
01:04:03: Modem 2/12 Mica: CONNECT at 9600/9600 (Tx/Rx), V110, V.110, None
01:04:04: As77 PPP: Treating connection as a callout
01:04:04: Modem 2/12 Mica: PPP escape_map: Tx map = FFFFFFFF, Rx map = 0
01:04:04: As77 PPP: Authorization required
01:04:04: %LINK-3-UPDOWN: Interface Async77, changed state to up
01:04:04: As77 DDR: Dialer statechange to up
01:04:04: As77 DDR: Copying MS callback dialstring DI00478681006 to ddb
01:04:04: DDR: Freeing callback to alaingsm DI00478681006
01:04:04: As77 DDR: Dialer call has been placed
01:04:08: Modem 2/12 Mica: PPP escape_map: Tx map = A0000, Rx map = 0
01:04:08: As77 MCB: Initialize
01:04:08: Modem 2/12 Mica: Bad RX Frame: control = 0xE007, length = 0xD, 
buffer = 0x3BC6E54
01:04:09: %ISDN-6-CONNECT: Interface Serial1/0:30 is now connected to 00478681006    
01:04:11: As77 PAP: I AUTH-REQ id 2 len 16 from "alaingsm"
01:04:11: As77 PAP: Authenticating peer alaingsm
01:04:11: As77 PPP: Sent PAP LOGIN Request to AAA
01:04:11: As77 PPP: Received LOGIN Response from AAA = PASS
01:04:11: As77 DDR: Remote name for alaingsm
01:04:11: As77 DDR: Authenticated host alaingsm with no matching dialer map
01:04:11: As77 PAP: O AUTH-ACK id 2 len 5
01:04:13: As77 DDR: dialer protocol up
   
suzanne#show ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, 
E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
   
Gateway of last resort is 172.17.243.1 to network 0.0.0.0

172.17.0.0/24 is subnetted, 1 subnets
C 172.17.243.0 is directly connected, Ethernet0/0
172.31.0.0/16 is variably subnetted, 2 subnets, 2 masks
C 172.31.1.28/32 is directly connected, Async77
C 172.31.0.0/16 is directly connected, Dialer1
S* 0.0.0.0/0 [1/0] via 172.17.243.1

   
suzanne#ping 172.31.1.28
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.31.1.28, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 784/858/880 ms

   
suzanne#
01:04:49: ISDN Se1/0:15: RX <- DISCONNECT pd = 8 callref = 0x800E
01:04:49: Cause i = 0x8090 - Normal call clearing
01:04:49: %ISDN-6-DISCONNECT: Interface Serial1/0:30 disconnected from 
00478681006, call lasted 46 seconds
01:04:49: ISDN Se1/0:15: TX -> RELEASE pd = 8 callref = 0x000E
01:04:49: Modem 2/12 Mica: in modem state TERMINATING
01:04:49: ISDN Se1/0:15: RX <- RELEASE_COMP pd = 8 callref = 0x800E
01:04:49: Modem 2/12 Mica: in modem state IDLE
01:04:49: Modem 2/12 Mica: DISCONNECT after 00:00:46, 
due to reason (0xDF00) Host Disconnect.
01:04:50: TTY77: DSR was dropped
01:04:50: tty77: Modem: READY->(unknown)
01:04:51: TTY77: Async Int reset: Dropping DTR
01:04:51: Modem 2/12 Mica: PPP escape_map: Tx map = FFFFFFFF, Rx map = 0
01:04:51: As77 PPP: Authorization required
01:04:51: TTY77: dropping DTR, hanging up
01:04:51: tty77: Modem: HANGUP->(unknown)
01:04:52: TTY77: cleanup pending. Delaying DTR
01:04:53: %LINK-5-CHANGED: Interface Async77, changed state to reset
01:04:53: TTY77: cleanup pending. Delaying DTR
01:04:54: TTY77: cleanup pending. Delaying DTR
01:04:55: TTY77: cleanup pending. Delaying DTR
01:04:56: TTY77: no timer type 0 to destroy
01:04:56: TTY77: no timer type 1 to destroy
01:04:56: TTY77: no timer type 3 to destroy
01:04:56: TTY77: no timer type 4 to destroy
01:04:56: TTY77: no timer type 2 to destroy
01:04:56: Async77: allowing modem_process to continue hangup
01:04:56: TTY77: restoring DTR
01:04:58: %LINK-3-UPDOWN: Interface Async77, changed state to down
01:05:08: As77 DDR: re-enable timeout

V.110을 사용하는 모뎀 콜백 


!--- Modem callback using default of MICA (modem dialing US robotics).


suzanne#
01:06:21: ISDN Se1/0:15: RX <- SETUP pd = 8 callref = 0x6D73
01:06:21: Sending Complete
01:06:21: Bearer Capability i = 0x9090A3
01:06:21: Channel ID i = 0xA18387
01:06:21: Progress Ind i = 0x8183 - Origination address is non-ISDN 
01:06:21: Calling Party Number i = 0xA1, '6020', Plan:ISDN, Type:National
01:06:21: Called Party Number i = 0x81, '214', Plan:ISDN, Type:Unknown
01:06:21: ISDN Se1/0:15: TX -> CALL_PROC pd = 8 callref = 0xED73
01:06:21: Channel ID i = 0xA98387
01:06:21: ISDN Se1/0:15: TX -> ALERTING pd = 8 callref = 0xED73
01:06:21: ISDN Se1/0:15: TX -> CONNECT pd = 8 callref = 0xED73
01:06:21: ISDN Se1/0:15: RX <- CONNECT_ACK pd = 8 callref = 0x6D73
01:06:21: ISDN Se1/0:15: CALL_PROGRESS: CALL_CONNECTED call id 0x1A, bchan 6, dsl 0
01:06:21: Modem 2/13 Mica: configured for Answer mode, with Null signaling, 
0x0 tone detection.
01:06:21: Modem 2/13 Mica: in modem state CALL_SETUP
01:06:22: Modem 2/13 Mica: in modem state CONNECT
01:06:26: Modem 2/13 Mica: in modem state LINK
01:06:27: %ISDN-6-CONNECT: Interface Serial1/0:6 is now connected to 6020 
01:06:34: Modem 2/13 Mica: in modem state TRAINUP
01:06:36: Modem 2/13 Mica: in modem state EC_NEGOTIATING
01:06:36: Modem 2/13 Mica: in modem state STEADY
01:06:36: Modem 2/13 Mica: CONNECT at 9600/9600 (Tx/Rx), V34+, LAPM, None
01:06:37: TTY78: DSR came up
01:06:37: tty78: Modem: IDLE->(unknown)
01:06:37: TTY78: EXEC creation
01:06:37: TTY78: set timer type 10, 30 seconds
01:06:40: TTY78: Autoselect(2) sample 7E
01:06:40: TTY78: Autoselect(2) sample 7EFF
01:06:40: TTY78: Autoselect(2) sample 7EFF7D
01:06:40: TTY78: Autoselect(2) sample 7EFF7D23
01:06:40: TTY78 Autoselect cmd: ppp negotiate
01:06:40: TTY78: EXEC creation
01:06:40: TTY78: create timer type 1, 600 seconds
01:06:40: TTY78: destroy timer type 1
01:06:40: TTY78: no timer type 0 to destroy
01:06:40: As78 DDR: Dialer received incoming call from <unknown>
01:06:42: %LINK-3-UPDOWN: Interface Async78, changed state to up
01:06:42: As78 DDR: Dialer statechange to up
01:06:42: As78 DDR: Dialer received incoming call from <unknown>
01:06:42: As78 PPP: Treating connection as a callin
01:06:42: As78 PPP: Authorization required
01:06:43: Modem 2/13 Mica: PPP escape_map: Tx map = FFFFFFFF, Rx map = 0
01:06:43: As78 PPP: Authorization required
01:06:47: Modem 2/13 Mica: PPP escape_map: Tx map = A0000, Rx map = 0
01:06:47: As78 MCB: Initialize   01:06:47: MCB: Flush
01:06:47: Modem 2/13 Mica: Bad RX Frame: control = 0xE007, length = 0xE, buffer = 0x3BC9014
01:06:50: As78 PAP: I AUTH-REQ id 2 len 16 from "alainmod"
01:06:50: As78 PAP: Authenticating peer alainmod
01:06:50: As78 PPP: Sent PAP LOGIN Request to AAA
01:06:50: As78 PPP: Received LOGIN Response from AAA = PASS
01:06:50: As78 DDR: Remote name for alainmod
01:06:50: As78 DDR: Authenticated host alainmod with no matching dialer map
01:06:50: As78 PAP: O AUTH-ACK id 2 len 5
01:06:50: As78 MCB: Start
01:06:50: As78 MCB: User alainmod Callback Number - Client ANY
01:06:50: As78 MCB: Newstate 0-INIT -> 2-WAIT_RESPONSE
01:06:50: As78 MCB: O Request Id 1 Callback Type Client-Num delay 0
01:06:52: As78 MCB: Timeout in state WAIT_RESPONSE sending new Request 2
01:06:52: As78 MCB: O Request Id 2 Callback Type Client-Num delay 0
01:06:54: As78 MCB: Timeout in state WAIT_RESPONSE sending new Request 3
01:06:54: As78 MCB: O Request Id 3 Callback Type Client-Num delay 0
01:06:54: Async78 PPP: I MCB Response(2) id 1 len 17
01:06:54: Async78 MCB: I 2 1 0 11 2 D F 1 5A 44 54 20 36 30 32 30 0 
01:06:54: As78 MCB: Received response
01:06:54: As78 MCB: Resp ignored. ID Expected 3, got id 1
01:06:56: As78 MCB: Timeout in state WAIT_RESPONSE sending new Request 4
01:06:56: As78 MCB: O Request Id 4 Callback Type Client-Num delay 0
01:06:56: Async78 PPP: I MCB Response(2) id 4 len 17
01:06:56: Async78 MCB: I 2 4 0 11 2 D F 1 5A 44 54 20 36 30 32 30 0 
01:06:56: As78 MCB: Received response
01:06:56: As78 MCB: Response CBK-Client-Num 2 13 15, addr 1-ZDT 6020
01:06:56: As78 MCB: O Ack Id 5 Callback Type Client-Num delay 15
01:06:56: As78 MCB: Negotiated MCB with peer
01:06:56: As78 MCB: Newstate 2-WAIT_RESPONSE -> 3-WAIT_TERMINATE
01:06:56: As78 MCB: Peer terminating the link
01:06:56: As78 MCB: Newstate 3-WAIT_TERMINATE -> 5-WAIT_LINKDOWN
01:06:56: As78 MCB: Link terminated by peer, Callback Needed
01:06:56: As78 MCB: Newstate 5-WAIT_LINKDOWN -> 6-CALLING
01:06:56: As78 MCB: Initiate Callback for ^->o`iB@ at ZDT 6020 using Async DDR
01:06:56: As78 DDR: PPP callback Callback server starting to alainmod ZDT 6020
01:06:56: As78 MCB: Dialer callback started
01:06:57: Modem 2/13 Mica: in modem state TERMINATING
01:06:57: Modem 2/13 Mica: in modem state IDLE
01:06:57: %ISDN-6-DISCONNECT: Interface Serial1/0:6 disconnected from 6020, 
call lasted 36 seconds
01:06:57: ISDN Se1/0:15: TX -> DISCONNECT pd = 8 callref = 0xED73
01:06:57: Cause i = 0x8090 - Normal call clearing
01:06:57: Modem 2/13 Mica: DISCONNECT after 00:00:35, due to reason (0x8220) 
EC rcvd DISC frame. 
01:06:57: TTY78: DSR was dropped
01:06:57: tty78: Modem: READY->(unknown)
01:06:57: ISDN Se1/0:15: RX <- RELEASE pd = 8 callref = 0x6D73
01:06:57: ISDN Se1/0:15: TX -> RELEASE_COMP pd = 8 callref = 0xED73
01:06:58: TTY78: dropping DTR, hanging up
01:06:58: TTY78: Async Int reset: Dropping DTR
01:06:58: tty78: Modem: HANGUP->(unknown)
01:06:59: TTY78: cleanup pending. Delaying DTR
01:06:59: Modem 2/13 Mica: PPP escape_map: Tx map = FFFFFFFF, Rx map = 0
01:06:59: As78 PPP: Authorization required
01:07:00: %LINK-5-CHANGED: Interface Async78, changed state to reset
01:07:00: TTY78: cleanup pending. Delaying DTR
01:07:01: TTY78: cleanup pending. Delaying DTR
01:07:02: TTY78: cleanup pending. Delaying DTR
01:07:03: TTY78: no timer type 0 to destroy
01:07:03: TTY78: no timer type 1 to destroy
01:07:03: TTY78: no timer type 3 to destroy
01:07:03: TTY78: no timer type 4 to destroy
01:07:03: TTY78: no timer type 2 to destroy
01:07:03: Async78: allowing modem_process to continue hangup
01:07:03: TTY78: restoring DTR
01:07:05: %LINK-3-UPDOWN: Interface Async78, changed state to down
01:07:15: As78 DDR: re-enable timeout


!--- Callback start.


01:07:15: DDR: callback triggered by dialer_timers
01:07:15: As78 DDR: beginning callback to alainmod ZDT 6020
01:07:15: As78 DDR: Attempting to dial ZDT 6020
01:07:15: CHAT78: Attempting async line dialer script
01:07:15: CHAT78: Dialing using Modem script: callback2gsm 
& System script: none
01:07:15: CHAT78: process started
01:07:15: CHAT78: Asserting DTR
01:07:15: CHAT78: Chat script callback2gsm started
01:07:15: CHAT78: Sending string: AT&F
01:07:15: CHAT78: Expecting string: OK
01:07:15: CHAT78: Completed match for expect: OK
01:07:15: CHAT78: Sending string: ATS29=8
01:07:15: CHAT78: Expecting string: OK
01:07:15: CHAT78: Completed match for expect: OK 


!--- The user entered "ZDT 6020". This is what we send:


01:07:15: CHAT78: Sending string: AT \T<ZDT 6020> 
01:07:15: CHAT78: Expecting string: CONNECT
01:07:15: Modem 2/13 Mica: configured for Originate mode, with Null signaling, 
0x1 tone detection.
01:07:15: Modem 2/13 Mica: received dialstring 6020
01:07:15: ISDN Se1/0:15: TX -> SETUP pd = 8 callref = 0x000F
01:07:15: Bearer Capability i = 0x9090A3
01:07:15: Channel ID i = 0xA9839F
01:07:15: Called Party Number i = 0x81, '6020', Plan:ISDN, Type:Unknown
01:07:15: ISDN Se1/0:15: RX <- CALL_PROC pd = 8 callref = 0x800F
01:07:15: Channel ID i = 0xA9839F
01:07:15: ISDN Se1/0:15: RX <- ALERTING pd = 8 callref = 0x800F
01:07:15: Modem 2/13 Mica: in modem state CALL_SETUP
01:07:16: Modem 2/13 Mica: Detected Dial tone
01:07:17: ISDN Se1/0:15: RX <- CONNECT pd = 8 callref = 0x800F
01:07:17: Progress Ind i = 0x8182 - Destination address is non-ISDN 
01:07:17: Connected Number i = 0xA136303230
01:07:17: ISDN Se1/0:15: TX -> CONNECT_ACK pd = 8 callref = 0x000F
01:07:17: Modem 2/13 Mica: in modem state CONNECT
01:07:19: Modem 2/13 Mica: in modem state LINK
01:07:23: %ISDN-6-CONNECT: Interface Serial1/0:30 is now connected to 6020 
01:07:26: Modem 2/13 Mica: in modem state TRAINUP
01:07:28: Modem 2/13 Mica: in modem state EC_NEGOTIATING
01:07:28: Modem 2/13 Mica: in modem state STEADY
01:07:28: CHAT78: Completed match for expect: CONNECT
01:07:28: CHAT78: Sending string: \c
01:07:28: CHAT78: Chat script callback2gsm finished, status = Success
01:07:28: TTY78: no timer type 1 to destroy
01:07:28: TTY78: no timer type 0 to destroy
01:07:28: Modem 2/13 Mica: CONNECT at 33600/31200 (Tx/Rx), V34+, LAPM, None
01:07:28: As78 PPP: Treating connection as a callout
01:07:28: Modem 2/13 Mica: PPP escape_map: Tx map = FFFFFFFF, Rx map = 0
01:07:28: As78 PPP: Authorization required
01:07:28: %LINK-3-UPDOWN: Interface Async78, changed state to up
01:07:28: As78 DDR: Dialer statechange to up
01:07:28: As78 DDR: Copying MS callback dialstring ZDT 6020 to ddb
01:07:28: DDR: Freeing callback to alainmod ZDT 6020
01:07:28: As78 DDR: Dialer call has been placed
01:07:29: Modem 2/13 Mica: PPP escape_map: Tx map = A0000, Rx map = 0
01:07:29: As78 MCB: Initialize
01:07:29: As78 PAP: I AUTH-REQ id 1 len 16 from "alainmod"
01:07:29: As78 PAP: Authenticating peer alainmod
01:07:29: As78 PPP: Sent PAP LOGIN Request to AAA
01:07:29: As78 PPP: Received LOGIN Response from AAA = PASS
01:07:29: As78 DDR: Remote name for alainmod
01:07:29: As78 DDR: Authenticated host alainmod with no matching dialer map
01:07:29: As78 PAP: O AUTH-ACK id 1 len 5
01:07:29: As78 DDR: dialer protocol up
01:07:29: %LINEPROTO-5-UPDOWN: Line protocol on Interface Async78, 
changed state to up
   
suzanne#show ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is 172.17.243.1 to network 0.0.0.0
172.17.0.0/24 is subnetted, 1 subnets
C 172.17.243.0 is directly connected, Ethernet0/0
172.31.0.0/16 is variably subnetted, 2 subnets, 2 masks
C 172.31.1.19/32 is directly connected, Async78
C 172.31.0.0/16 is directly connected, Dialer1
S* 0.0.0.0/0 [1/0] via 172.17.243.1
 
suzanne#ping 172.31.1.19

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.31.1.19, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 356/372/396 ms
   
suzanne#
01:08:08: Modem 2/13 Mica: in modem state TERMINATING
01:08:08: Modem 2/13 Mica: in modem state IDLE
01:08:08: Modem 2/13 Mica: DISCONNECT after 00:00:51, due to reason (0x8220) 
EC rcvd DISC frame.
01:08:08: %ISDN-6-DISCONNECT: Interface Serial1/0:30 disconnected from 6020, 
call lasted 51 seconds
01:08:08: ISDN Se1/0:15: TX -> DISCONNECT pd = 8 callref = 0x000F
01:08:08: Cause i = 0x8090 - Normal call clearing
01:08:08: ISDN Se1/0:15: RX <- RELEASE pd = 8 callref = 0x800F
01:08:08: ISDN Se1/0:15: TX -> RELEASE_COMP pd = 8 callref = 0x000F
01:08:09: TTY78: DSR was dropped
01:08:09: tty78: Modem: READY->(unknown)
01:08:09: %LINEPROTO-5-UPDOWN: Line protocol on Interface Async78, 
changed state to down
01:08:10: TTY78: dropping DTR, hanging up
01:08:10: TTY78: Async Int reset: Dropping DTR
01:08:10: tty78: Modem: HANGUP->(unknown)
01:08:10: Modem 2/13 Mica: PPP escape_map: Tx map = FFFFFFFF, Rx map = 0
01:08:10: As78 PPP: Authorization required
01:08:11: TTY78: cleanup pending. Delaying DTR
01:08:12: %LINK-5-CHANGED: Interface Async78, changed state to reset
01:08:12: TTY78: cleanup pending. Delaying DTR
01:08:13: TTY78: cleanup pending. Delaying DTR
01:08:14: TTY78: cleanup pending. Delaying DTR
01:08:15: TTY78: no timer type 0 to destroy
01:08:15: TTY78: no timer type 1 to destroy
01:08:15: TTY78: no timer type 3 to destroy
01:08:15: TTY78: no timer type 4 to destroy
01:08:15: TTY78: no timer type 2 to destroy
01:08:15: Async78: allowing modem_process to continue hangup
01:08:15: TTY78: restoring DTR
01:08:17: %LINK-3-UPDOWN: Interface Async78, changed state to down
01:08:27: As78 DDR: re-enable timeout

V.110을 사용한 ISDN 콜백 


!--- Receive call.

suzanne#
01:09:00: ISDN Se1/0:15: RX <- SETUP pd = 8 callref = 0x6F28
01:09:00: Sending Complete
01:09:00: Bearer Capability i = 0x8890
01:09:00: Channel ID i = 0xA18388
01:09:00: Calling Party Number i = 0xA1, '6136', Plan:ISDN, Type:National
01:09:00: Called Party Number i = 0x81, '214', Plan:ISDN, Type:Unknown
01:09:00: %LINK-3-UPDOWN: Interface Serial1/0:7, changed state to up
01:09:00: ISDN Se1/0:15: TX -> CALL_PROC pd = 8 callref = 0xEF28
01:09:00: Channel ID i = 0xA98388
01:09:00: ISDN Se1/0:15: TX -> CONNECT pd = 8 callref = 0xEF28
01:09:00: Channel ID i = 0xA98388
01:09:00: Se1/0:7 PPP: Treating connection as a callin
01:09:00: Se1/0:7 PPP: Authorization required
01:09:00: ISDN Se1/0:15: RX <- CONNECT_ACK pd = 8 callref = 0x6F28
01:09:00: ISDN Se1/0:15: CALL_PROGRESS: CALL_CONNECTED call id 0x1B, 
bchan 7, dsl 0
01:09:01: Se1/0:7 PPP: Authorization required
01:09:01: Se1/0:7 MCB: Initialize
01:09:01: Se1/0:7 CHAP: O CHALLENGE id 1 len 28 from "suzanne"
01:09:01: Se1/0:7 CHAP: I RESPONSE id 1 len 30 from "alainisdn"
01:09:01: Se1/0:7 PPP: Sent CHAP LOGIN Request to AAA
01:09:01: Se1/0:7 PPP: Received LOGIN Response from AAA = PASS
01:09:01: Se1/0:7 DDR: Remote name for alainisdn
01:09:01: Se1/0:7 CHAP: O SUCCESS id 1 len 4
01:09:01: Se1/0:7 DDR: PPP callback Callback server starting to 
alainisdn 6136
01:09:01: Se1/0:7 DDR: disconnecting call
01:09:01: %ISDN-6-CONNECT: Interface Serial1/0:7 is now connected to 
6136 alainisdn
01:09:01: ISDN Se1/0:15: TX -> DISCONNECT pd = 8 callref = 0xEF28
01:09:01: Cause i = 0x8090 - Normal call clearing
01:09:01: ISDN Se1/0:15: RX <- RELEASE pd = 8 callref = 0x6F28
01:09:01: %LINK-3-UPDOWN: Interface Serial1/0:7, changed state to down
01:09:01: ISDN Se1/0:15: TX -> RELEASE_COMP pd = 8 callref = 0xEF28
01:09:01: Se1/0:7 DDR: disconnecting call
01:09:02: ISDN Se1/0:15: RX <- SETUP pd = 8 callref = 0x70DF
01:09:02: Sending Complete
01:09:02: Bearer Capability i = 0x8890
01:09:02: Channel ID i = 0xA18389
01:09:02: Calling Party Number i = 0xA1, '6136', Plan:ISDN, Type:National
01:09:02: Called Party Number i = 0x81, '214', Plan:ISDN, Type:Unknown
01:09:02: %LINK-3-UPDOWN: Interface Serial1/0:8, changed state to up
01:09:02: ISDN Se1/0:15: TX -> CALL_PROC pd = 8 callref = 0xF0DF
01:09:02: Channel ID i = 0xA98389
01:09:02: ISDN Se1/0:15: TX -> CONNECT pd = 8 callref = 0xF0DF
01:09:02: Channel ID i = 0xA98389
01:09:02: Se1/0:8 PPP: Treating connection as a callin
01:09:02: Se1/0:8 PPP: Authorization required
01:09:02: ISDN Se1/0:15: RX <- CONNECT_ACK pd = 8 callref = 0x70DF
01:09:02: ISDN Se1/0:15: CALL_PROGRESS: CALL_CONNECTED call id 0x1C, 
bchan 8, dsl 0
01:09:02: Se1/0:8 PPP: Authorization required
01:09:03: Se1/0:8 MCB: Initialize
01:09:03: Se1/0:8 CHAP: O CHALLENGE id 1 len 28 from "suzanne"
01:09:03: Se1/0:8 CHAP: I RESPONSE id 1 len 30 from "alainisdn"
01:09:03: Se1/0:8 PPP: Sent CHAP LOGIN Request to AAA
01:09:03: Se1/0:8 PPP: Received LOGIN Response from AAA = PASS
01:09:03: Se1/0:8 DDR: Remote name for alainisdn
01:09:03: Se1/0:8 CHAP: O SUCCESS id 1 len 4
01:09:03: Se1/0:8 DDR: callback to alainisdn already started
01:09:03: Se1/0:8 DDR: disconnecting call
01:09:03: %ISDN-6-CONNECT: Interface Serial1/0:8 is now connected 
to 6136 alainisdn
01:09:03: ISDN Se1/0:15: TX -> DISCONNECT pd = 8 callref = 0xF0DF
01:09:03: Cause i = 0x8090 - Normal call clearing
01:09:03: ISDN Se1/0:15: RX <- RELEASE pd = 8 callref = 0x70DF
01:09:03: %LINK-3-UPDOWN: Interface Serial1/0:8, changed state to down
01:09:03: ISDN Se1/0:15: TX -> RELEASE_COMP pd = 8 callref = 0xF0DF
01:09:03: Se1/0:8 DDR: disconnecting call


!--- Callback Start 


01:09:16: DDR: Callback timer expired
01:09:16: Di1 DDR: beginning callback to alainisdn 6136
01:09:16: Se1/0:15 DDR: rotor dialout [priority]
01:09:16: Se1/0:15 DDR: Attempting to dial 6136
01:09:16: ISDN Se1/0:15: TX -> SETUP pd = 8 callref = 0x0010
01:09:16: Bearer Capability i = 0x8890
01:09:16: Channel ID i = 0xA9839F
01:09:16: Called Party Number i = 0x81, '6136', Plan:ISDN, Type:Unknown
01:09:16: ISDN Se1/0:15: RX <- CALL_PROC pd = 8 callref = 0x8010
01:09:16: Channel ID i = 0xA9839F
01:09:16: ISDN Se1/0:15: RX <- ALERTING pd = 8 callref = 0x8010
01:09:16: ISDN Se1/0:15: RX <- CONNECT pd = 8 callref = 0x8010
01:09:16: Connected Number i = 0xA136313336
01:09:16: %LINK-3-UPDOWN: Interface Serial1/0:30, changed state to up
01:09:16: DDR: Freeing callback to alainisdn 6136
01:09:16: ISDN Se1/0:15: TX -> CONNECT_ACK pd = 8 callref = 0x0010
01:09:16: Se1/0:30 PPP: Treating connection as a callout
01:09:16: Se1/0:30 PPP: Authorization required
01:09:16: Se1/0:30 MCB: Initialize
01:09:16: Se1/0:30 CHAP: I CHALLENGE id 7 len 30 from "alainisdn"
01:09:16: Se1/0:30 PPP: Sent CHAP SENDAUTH Request to AAA
01:09:16: Se1/0:30 PPP: Received SENDAUTH Response from AAA = PASS
01:09:16: Se1/0:30 CHAP: O RESPONSE id 7 len 28 from "suzanne"
01:09:16: Se1/0:30 CHAP: I SUCCESS id 7 len 4
01:09:16: Se1/0:30 PPP: Sent LCP AUTHOR Request to AAA
01:09:16: Se1/0:30 PPP: Sent IPCP AUTHOR Request to AAA
01:09:16: Se1/0:30 LCP: Received AAA AUTHOR Response = PASS
01:09:16: Se1/0:30 IPCP: Received AAA AUTHOR Response = PASS
01:09:16: Se1/0:30 DDR: dialer protocol up
01:09:17: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0:30, 
changed state to up
01:09:22: %ISDN-6-CONNECT: Interface Serial1/0:30 is now connected to 
6136 alainisdn
suzanne#
   
suzanne#show ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route

Gateway of last resort is 172.17.243.1 to network 0.0.0.0

  172.17.0.0/24 is subnetted, 1 subnets
C 172.17.243.0 is directly connected, Ethernet0/0
  172.31.0.0/16 is variably subnetted, 2 subnets, 2 masks
C 172.31.1.2/32 is directly connected, Dialer1
C 172.31.0.0/16 is directly connected, Dialer1
S* 0.0.0.0/0 [1/0] via 172.17.243.1
   
suzanne#ping 172.31.1.2

  Type escape sequence to abort. 
  Sending 5, 100-byte ICMP Echos to 172.31.1.2, timeout is 2 seconds:
  !!!!!
  Success rate is 100 percent (5/5), round-trip min/avg/max = 32/34/36 ms  
  suzanne#

관련 정보

개정 이력

개정 게시 날짜 의견
1.0
14-Sep-2005
최초 릴리스

기고자

  • alanssie
    pdetroye

이 문서가 도움이 되셨습니까?

Feedback피드백

지원 문의

이 문서가 적용되는 제품