PIX/ASA 7.x en hoger: Dynamische IPsec tussen een statische geadresseerde IOS-router en een dynamisch geadresseerde PIX met NAT-configuratievoorbeeld

Downloadopties

  • PDF     (329.1 KB)
    Met Adobe Reader op diverse apparaten bekijken
  • ePub     (121.3 KB)
    Bekijken in diverse apps op iPhone, iPad, Android, Sony Reader of Windows Phone
  • Mobi (Kindle)     (132.5 KB)
    Op Kindle-apparaat of via Kindle-app op meerdere apparaten bekijken
Bijgewerkt:10 oktober 2008
Document-id:82077

Inclusief taalgebruik

De documentatie van dit product is waar mogelijk geschreven met inclusief taalgebruik. Inclusief taalgebruik wordt in deze documentatie gedefinieerd als taal die geen discriminatie op basis van leeftijd, handicap, gender, etniciteit, seksuele oriëntatie, sociaaleconomische status of combinaties hiervan weerspiegelt. In deze documentatie kunnen uitzonderingen voorkomen vanwege bewoordingen die in de gebruikersinterfaces van de productsoftware zijn gecodeerd, die op het taalgebruik in de RFP-documentatie zijn gebaseerd of die worden gebruikt in een product van een externe partij waarnaar wordt verwezen. Lees meer over hoe Cisco gebruikmaakt van inclusief taalgebruik.

Over deze vertaling

Cisco heeft dit document vertaald via een combinatie van machine- en menselijke technologie om onze gebruikers wereldwijd ondersteuningscontent te bieden in hun eigen taal. Houd er rekening mee dat zelfs de beste machinevertaling niet net zo nauwkeurig is als die van een professionele vertaler. Cisco Systems, Inc. is niet aansprakelijk voor de nauwkeurigheid van deze vertalingen en raadt aan altijd het oorspronkelijke Engelstalige document (link) te raadplegen.

Inleiding

Dit document verstrekt een steekproefconfiguratie die u toont hoe te om de router toe te laten om dynamische IPsec verbindingen van een PIX te accepteren. De externe router voert netwerkadresomzetting (NAT) uit als een privaat netwerk 10.2.1.x toegang tot internet heeft. Het verkeer van 10.2.1.x naar een privaat netwerk 10.1.1.x achter de PIX security applicatie is uitgesloten van het NAT-proces. De IPsec-tunnel maakt alleen gebruik van als het verkeer (10.1.1.x) de verbinding vanaf de PIX security applicatie initieert met de router met een extern netwerk (10.2.1.x). De PIX kan verbindingen met de router initiëren, maar de router kan geen verbindingen met de PIX initiëren.

Deze configuratie gebruikt een Cisco IOS® router om dynamische IPsec LAN-to-LAN (L2L)-tunnels te maken met een security applicatie die dynamische IP-adressen ontvangt op hun openbare interface (buiteninterface). Dynamic Host Configuration Protocol (DHCP) biedt een mechanisme voor de dynamische toewijzing van IP-adressen van de serviceprovider. Hierdoor kunnen IP-adressen worden hergebruikt wanneer hosts deze niet langer nodig hebben.

Zie PIX-to-Router Dynamic-to-Static IPSec met NAT configureren voor meer informatie over een scenario waarin PIX 6.x dynamische IPsec-verbindingen van de router accepteert.

Raadpleeg Router-to-PIX Dynamic-to-Static IPsec met NAT Configuration Voorbeeld voor meer informatie over een scenario waarin de router dynamische IPsec-verbindingen accepteert van een PIX-firewall die 6.x uitvoert.

Raadpleeg IPsec tussen een statische IOS-router en een dynamisch PIX/ASA 7.x met NAT-configuratievoorbeeld om de PIX/ASA security applicatie in staat te stellen dynamische IPsec-verbindingen van de Cisco IOS-router te accepteren.

Raadpleeg het configuratievoorbeeld van PIX/ASA 7.x PIX-to-PIX Dynamic-to-Static IPsec met NAT en VPN voor meer informatie over het scenario waarin de PIX/ASA security applicatie 7.x dynamische IPsec-verbindingen van een andere PIX 6.x accepteert.

Voorwaarden

Vereisten

Zorg ervoor dat zowel de PIX als de router internetconnectiviteit hebben voor de installatie van de IPsec-tunnel voordat u deze configuratie probeert.

Dit document gaat ervan uit dat u de IP-adressen op zowel de openbare als de privé-interfaces al hebt toegewezen en dat u het IP-adres van het externe VPN-apparaat kunt pingen.

Gebruikte componenten

De informatie in dit document is gebaseerd op de volgende software- en hardware-versies:

  • Cisco 3600 Series met Cisco IOS-softwarerelease 12.4

  • Software voor PIX 515E Series security applicatie 7.x en hoger

De informatie in dit document is gebaseerd op de apparaten in een specifieke laboratoriumomgeving. Alle apparaten die in dit document worden beschreven, hadden een opgeschoonde (standaard)configuratie. Als uw netwerk live is, moet u de potentiële impact van elke opdracht begrijpen.

Verwante producten

Cisco ASA 5500 Series versie 7.x draait een vergelijkbare softwareversie van PIX versie 7.x. De configuraties in dit document zijn van toepassing op beide productlijnen.

Conventies

Raadpleeg Cisco Technical Tips Conventions (Conventies voor technische tips van Cisco) voor meer informatie over documentconventies.

Achtergrondinformatie

Op de PIX werken de toegangslijst en NAT 0-opdrachten samen. Wanneer een gebruiker op het 10.1.1.0-netwerk naar het 10.2.1.0-netwerk gaat, wordt de toegangslijst gebruikt om toe te staan dat het 10.1.1.0-netwerkverkeer wordt versleuteld zonder NAT. Op de router worden de opdrachten van de toegangslijst gebruikt om het 10.2.1.0-netwerkverkeer zonder NAT te kunnen versleutelen. Wanneer dezelfde gebruikers echter ergens anders naartoe gaan (zoals internet), worden ze vertaald naar het IP-adres van de buiteninterface via poortadresomzetting (PAT).

Dit zijn de configuratieopdrachten die op de PIX security applicatie vereist zijn, zodat verkeer niet door PAT over de tunnel kan lopen en verkeer naar het internet door PAT kan lopen. 

access-list nonat permit ip 10.1.1.0 255.255.255.0 10.2.2.0 255.255.255.0
nat (inside) 0 access-list nonat
nat (inside) 1 10.1.1.0 255.255.255.0 0 0

Configureren

Deze sectie bevat informatie over het configureren van de functies die in dit document worden beschreven.

Opmerking: Gebruik de Command Lookup Tool (alleen voor geregistreerde klanten) voor meer informatie over de opdrachten die in deze sectie worden gebruikt.

Netwerkdiagram

Het netwerk in dit document is als volgt opgebouwd:

ipsec-pix-iosroutr-nat-config-1.gif

Configuraties

Dit document gebruikt de volgende configuraties:

PIX 7.x 
pixfirewall#show running-config 
 PIX Version 7.2(2)
!
hostname pixfirewall
enable password 8Ry2YjIyt7RRXU24 encrypted
names
!

!--- The interface dynamically learns its IP address !--- from the service provider.

interface Ethernet0
 nameif outside
 security-level 0
 ip address dhcp
!
interface Ethernet1
 nameif inside
 security-level 100
 ip address 10.1.1.2 255.255.255.0
!
!

 !-- Output is suppressed.

!
passwd 2KFQnbNIdI.2KYOU encrypted
ftp mode passive


 !--- This is the access list (IPsec-traffic) used for the VPN interesting traffic !--- to be encrypted.



access-list IPSec-traffic extended permit ip 10.1.1.0 255.255.255.0 10.2.1.0 255.255.255.0


!--- This access list (nonat) is used for a nat zero command that prevents !--- traffic which matches the access list from undergoing NAT.


access-list NO-NAT extended permit ip 10.1.1.0 255.255.255.0 10.2.1.0 255.255.255.0


pager lines 24
mtu inside 1500
mtu outside 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400


 !--- NAT 0 prevents NAT for networks specified in the ACL - nonat. !--- The nat 1 command specifies PAT using the !--- outside interface for all other traffic.


global (outside) 1 interface
nat (inside) 0 access-list NO-NAT
nat (inside) 1 0.0.0.0 0.0.0.0

route outside 0.0.0.0 0.0.0.0 172.16.1.2 1

timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart


!--- PHASE 2 CONFIGURATION ---! !--- The encryption types for Phase 2 are defined here. !--- A triple single DES encryption with !--- the md5 hash algorithm is used.


crypto ipsec transform-set DYN-TS esp-des esp-md5-hmac


!--- Define which traffic should be sent to the IPsec peer. 


crypto map IPSEC 10 match address IPSec-traffic


!--- Sets the IPsec peer.


crypto map IPSEC 10 set peer 192.168.1.2


!--- Sets the IPsec transform set "DYN-TS" !--- to be used with the crypto map entry "IPSEC".


crypto map IPSEC 10 set transform-set DYN-TS


!--- Specifies the interface to be used with !--- the settings defined in this configuration.


crypto map IPSEC interface outside


!--- Enables IPsec on the outside interface.

crypto isakmp enable outside


!--- PHASE 1 CONFIGURATION ---! !--- This configuration uses isakmp policy 10. !--- Policy 65535 is included in the configuration by default. !--- The configuration commands here define the Phase !--- 1 policy parameters that are used.

crypto isakmp policy 10
 authentication pre-share
 encryption des
 hash md5
 group 1
 lifetime 86400


crypto isakmp policy 65535
 authentication pre-share
 encryption 3des
 hash sha
 group 2
 lifetime 86400

!--- In order to create and manage the database of connection-specific records !--- for IPsec-L2L—IPsec tunnels, use the tunnel-group !--- command in global configuration mode. !--- For L2L connections the name of the tunnel group MUST be the IP !--- address of the IPsec peer. 

tunnel-group 192.168.1.2 type ipsec-l2l


!--- Enter the pre-shared-key in IPsec-attribute parameters !--- in order to configure the authentication method. 

tunnel-group 192.168.1.2 ipsec-attributes
 pre-shared-key *

telnet timeout 5
ssh timeout 5
console timeout 0
!
class-map inspection_default
 match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
 parameters
  message-length maximum 512
policy-map global_policy
 class inspection_default
  inspect dns preset_dns_map
  inspect ftp
  inspect h323 h225
  inspect h323 ras
  inspect netbios
  inspect rsh
  inspect rtsp
  inspect skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect tftp
  inspect sip
  inspect xdmcp
!
service-policy global_policy global
prompt hostname context
Cryptochecksum:d609c9eaf51c154f147b3b4ba3c834e0
: end
pixfirewall#

Router 
Router#show running-config
Current configuration : 1354 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
!
resource policy
!
!
!
ip cef
!


!--- Configuration for IKE policies. !--- Enables the IKE policy configuration (config-isakmp) !--- command mode, where you can specify the parameters that !--- are used during an IKE negotiation.


crypto isakmp policy 10
 hash md5
 authentication pre-share


!--- Specifies the preshared key "cisco123" which should !--- be identical at both peers. This is a global !--- configuration mode command. It accepts any peer which matches !--- the pre-shared key.

crypto isakmp key cisco123 address 0.0.0.0 0.0.0.0
!

!--- Configuration for IPsec policies. !--- Enables the crypto transform configuration mode, !--- where you can specify the transform sets that are used !--- during an IPsec negotiation. 


crypto ipsec transform-set DYN-TS esp-des esp-md5-hmac


!--- IPsec policy, Phase 2.


crypto dynamic-map DYN 10



!--- Configures IPsec to use the transform-set !--- "DYN-TS" defined earlier in this configuration.


 set transform-set DYN-TS



crypto map IPSEC 10 ipsec-isakmp dynamic DYN
!
interface Ethernet0/0
 ip address 192.168.1.2 255.255.255.0
 ip nat outside
 ip virtual-reassembly
 half-duplex

!--- Configures the interface to use the !--- crypto map "IPSEC" for IPsec.

 crypto map IPSEC
!
interface FastEthernet1/0
 ip address 10.2.1.1 255.255.255.0
 ip nat inside
 ip virtual-reassembly
 duplex auto
 speed auto
!
interface Serial2/0
 no ip address
 shutdown
 no fair-queue
!
interface Serial2/1
 no ip address
 shutdown
!
interface Serial2/2
 no ip address
 shutdown
!
interface Serial2/3
 no ip address
 shutdown
!
ip http server
no ip http secure-server
!
ip route 0.0.0.0 0.0.0.0 192.168.1.1
!
ip nat inside source list 100 interface Ethernet0/0 overload
!

!--- This ACL 100 identifies the traffic flows and be PATed !--- via the outside interface( Ethernet0/0).


access-list 100 deny ip 10.2.1.0 0.0.0.255 10.1.1.0 0.0.0.255
access-list 100 permit ip 10.2.1.0 0.0.0.255 any



control-plane
!

!
line con 0
line aux 0
line vty 0 4
!
!
end

Clear Security Associations (SA’s)

Gebruik deze opdrachten in de priviledge-modus van de PIX:

  • wis [crypto] ipsec sa-verwijdert de actieve IPsec SA's. Het sleutelwoord crypto is optioneel.

  • clear [crypto] isakmp sa—Verwijdert de actieve IKE SA's. Het sleutelwoord crypto is optioneel.

Verifiëren

Gebruik deze sectie om te controleren of uw configuratie goed werkt.

De Output Interpreter Tool (OIT) (alleen voor geregistreerde klanten) ondersteunt bepaalde opdrachten met show. Gebruik de OIT om een analyse te bekijken van de output van de opdracht show.

PIX security applicatie - toon opdrachten

  • show crypto isakmp sa – toont alle huidige IKE security koppelingen bij een peer. 

    pixfirewall#show crypto isakmp sa

     Active SA: 1
    Rekey SA: 0 (A tunnel will report 1 Active and 1 Rekey SA during rekey)
				Total IKE SA: 1

1   IKE Peer: 192.168.1.2
    Type    : L2L             Role    : initiator
    Rekey   : no              State   : MM_ACTIVE

  • show crypto ipsec sa – toont alle huidige IPsec security koppelingen bij een peer. 

    pixfirewall#show crypto ipsec sa
			interface: outside
    Crypto map tag: IPSEC, seq num: 10, local addr: 172.16.1.1

      access-list IPSec-traffic permit ip 10.1.1.0 255.255.255.0 10.2.1.0 255.255.255.0
      local ident (addr/mask/prot/port): (10.1.1.0/255.255.255.0/0/0)
      remote ident (addr/mask/prot/port): (10.2.1.0/255.255.255.0/0/0)
      current_peer: 192.168.1.2

      #pkts encaps: 10, #pkts encrypt: 10, #pkts digest: 10
      #pkts decaps: 10, #pkts decrypt: 10, #pkts verify: 10
      #pkts compressed: 0, #pkts decompressed: 0
      #pkts not compressed: 10, #pkts comp failed: 0, #pkts decomp failed: 0
      #pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
      #PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
      #send errors: 0, #recv errors: 0

      local crypto endpt.: 172.16.1.1, remote crypto endpt.: 192.168.1.2

      path mtu 1500, ipsec overhead 58, media mtu 1500
      current outbound spi: 537BC76F

    inbound esp sas:
      spi: 0x64D800CB (1691877579)
         transform: esp-des esp-md5-hmac none
         in use settings ={L2L, Tunnel, }
         slot: 0, conn_id: 1, crypto-map: IPSEC
         sa timing: remaining key lifetime (kB/sec): (4274999/3506)
         IV size: 8 bytes
         replay detection support: Y
    outbound esp sas:
      spi: 0x537BC76F (1400620911)
         transform: esp-des esp-md5-hmac none
         in use settings ={L2L, Tunnel, }
         slot: 0, conn_id: 1, crypto-map: IPSEC
         sa timing: remaining key lifetime (kB/sec): (4274999/3506)
         IV size: 8 bytes
         replay detection support: Y

Remote IOS-router - toon opdrachten

  • toon crypto isakmp sa-Toont alle huidige IKE SAs bij een peer. 

    Router#show crypto isakmp sa
dst             src             state          conn-id slot status
192.168.1.2     172.16.1.1      QM_IDLE              2    0 ACTIVE

  • toon crypto ipsec sa—Hier worden alle huidige IPsec SA's in een peer weergegeven. 

    Router#show crypto ipsec sa
		interface: Ethernet0/0
    Crypto map tag: IPSEC, local addr 192.168.1.2

   protected vrf: (none)
   local  ident (addr/mask/prot/port): (10.2.1.0/255.255.255.0/0/0)
   remote ident (addr/mask/prot/port): (10.1.1.0/255.255.255.0/0/0)
   current_peer 172.16.1.1 port 500
     PERMIT, flags={}
    #pkts encaps: 10, #pkts encrypt: 10, #pkts digest: 10
    #pkts decaps: 10, #pkts decrypt: 10, #pkts verify: 10
    #pkts compressed: 0, #pkts decompressed: 0
    #pkts not compressed: 0, #pkts compr. failed: 0
    #pkts not decompressed: 0, #pkts decompress failed: 0
    #send errors 0, #recv errors 0

     local crypto endpt.: 192.168.1.2, remote crypto endpt.: 172.16.1.1
     path mtu 1500, ip mtu 1500, ip mtu idb Ethernet0/0
     current outbound spi: 0x64D800CB(1691877579)

     inbound esp sas:
      spi: 0x537BC76F(1400620911)
        transform: esp-des esp-md5-hmac ,
        in use settings ={Tunnel, }
        conn id: 2001, flow_id: SW:1, crypto map: IPSEC
        sa timing: remaining key lifetime (k/sec): (4390267/3494)
        IV size: 8 bytes
        replay detection support: Y
        Status: ACTIVE

     inbound ah sas:

     inbound pcp sas:

     outbound esp sas:
      spi: 0x64D800CB(1691877579)
        transform: esp-des esp-md5-hmac ,
        in use settings ={Tunnel, }
        conn id: 2002, flow_id: SW:2, crypto map: IPSEC
        sa timing: remaining key lifetime (k/sec): (4390267/3492)
        IV size: 8 bytes
        replay detection support: Y
        Status: ACTIVE

     outbound ah sas:

     outbound pcp sas:

Problemen oplossen

Deze sectie bevat informatie waarmee u problemen met de configuratie kunt oplossen. De uitvoer van het voorbeelddebug wordt ook getoond.

De Output Interpreter Tool (OIT) (alleen voor geregistreerde klanten) ondersteunt bepaalde opdrachten met show. Gebruik de OIT om een analyse te bekijken van de output van de opdracht show.

N.B.: Raadpleeg Belangrijke informatie over debug-opdrachten en probleemoplossing voor IP-beveiliging - Begrijpen en gebruiken van debug-opdrachten voordat u debug-opdrachten geeft.

PIX security applicatie - debug uitvoer 

PIX#debug crypto isakmp 7
 Feb 22 01:39:59 [IKEv1 DEBUG]: Pitcher: received a key acquire mess
age, spi 0x0
Feb 22 01:39:59 [IKEv1]: IP = 192.168.1.2, IKE Initiator: New Phase 1, Intf insi
de, IKE Peer 192.168.1.2  local Proxy Address 10.1.1.0, remote Proxy Address 10.
2.1.0,  Crypto map (IPSEC)
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, constructing ISAKMP SA payload
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, constructing Fragmentation VID
+ extended capabilities payload
Feb 22 01:39:59 [IKEv1]: IP = 192.168.1.2, IKE_DECODE SENDING Message (msgid=0)
with payloads : HDR + SA (1) + VENDOR (13) + NONE (0) total length : 144
Feb 22 01:39:59 [IKEv1]: IP = 192.168.1.2, IKE_DECODE RECEIVED Message (msgid=0)
 with payloads : HDR + SA (1) + NONE (0) total length : 84
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, processing SA payload
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, Oakley proposal is acceptable
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, constructing ke payload
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, constructing nonce payload
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, constructing Cisco Unity VID pa
yload
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, constructing xauth V6 VID paylo
ad
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, Send IOS VID
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, Constructing ASA spoofing IOS V
endor ID payload (version: 1.0.0, capabilities: 20000001)
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, constructing VID payload
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, Send Altiga/Cisco VPN3000/Cisco
 ASA GW VID
Feb 22 01:39:59 [IKEv1]: IP = 192.168.1.2, IKE_DECODE SENDING Message (msgid=0)
with payloads : HDR + KE (4) + NONCE (10) + VENDOR (13) + VENDOR (13) + VENDOR (
13) + VENDOR (13) + NONE (0) total length : 224
Feb 22 01:39:59 [IKEv1]: IP = 192.168.1.2, IKE_DECODE RECEIVED Message (msgid=0)
 with payloads : HDR + KE (4) + NONCE (10) + VENDOR (13) + VENDOR (13) + VENDOR
(13) + VENDOR (13) + NONE (0) total length : 224
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, processing ke payload
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, processing ISA_KE payload
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, processing nonce payload
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, processing VID payload
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, Received Cisco Unity client VID
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, processing VID payload
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, Received DPD VID
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, processing VID payload
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, Processing IOS/PIX Vendor ID pa
yload (version: 1.0.0, capabilities: 0000077f)
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, processing VID payload
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, Received xauth V6 VID
Feb 22 01:39:59 [IKEv1]: IP = 192.168.1.2, Connection landed on tunnel_group 192
.168.1.2
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, Generating
 keys for Initiator...
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, constructi
ng ID payload
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, constructi
ng hash payload
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, Computing
hash for ISAKMP
Feb 22 01:39:59 [IKEv1 DEBUG]: IP = 192.168.1.2, Constructing IOS keep alive pay
load: proposal=32767/32767 sec.
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, constructi
ng dpd vid payload
Feb 22 01:39:59 [IKEv1]: IP = 192.168.1.2, IKE_DECODE SENDING Message (msgid=0)
with payloads : HDR + ID (5) + HASH (8) + IOS KEEPALIVE (128) + VENDOR (13) + NO
NE (0) total length : 92
Feb 22 01:39:59 [IKEv1]: IP = 192.168.1.2, IKE_DECODE RECEIVED Message (msgid=0)
 with payloads : HDR + ID (5) + HASH (8) + NONE (0) total length : 60
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, processing
 ID payload
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, processing
 hash payload
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, Computing
hash for ISAKMP
Feb 22 01:39:59 [IKEv1]: IP = 192.168.1.2, Connection landed on tunnel_group 192
.168.1.2
Feb 22 01:39:59 [IKEv1]: Group = 192.168.1.2, IP = 192.168.1.2, Freeing previous
ly allocated memory for authorization-dn-attributes
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, Oakley beg
in quick mode
Feb 22 01:39:59 [IKEv1]: Group = 192.168.1.2, IP = 192.168.1.2, PHASE 1 COMPLETE
D
Feb 22 01:39:59 [IKEv1]: IP = 192.168.1.2, Keep-alive type for this connection:
DPD
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, Starting P
1 rekey timer: 82080 seconds.
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, IKE got SP
I from key engine: SPI = 0x81004014
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, oakley con
stucting quick mode
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, constructi
ng blank hash payload
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, constructi
ng IPSec SA payload
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, constructi
ng IPSec nonce payload
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, constructi
ng proxy ID
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, Transmitti
ng Proxy Id:
  Local subnet:  10.1.1.0  mask 255.255.255.0 Protocol 0  Port 0
  Remote subnet: 10.2.1.0  Mask 255.255.255.0 Protocol 0  Port 0
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, constructi
ng qm hash payload
Feb 22 01:39:59 [IKEv1]: IP = 192.168.1.2, IKE_DECODE SENDING Message (msgid=270
72fbd) with payloads : HDR + HASH (8) + SA (1) + NONCE (10) + ID (5) + ID (5) +
NOTIFY (11) + NONE (0) total length : 192
Feb 22 01:39:59 [IKEv1]: IP = 192.168.1.2, IKE_DECODE RECEIVED Message (msgid=27
072fbd) with payloads : HDR + HASH (8) + SA (1) + NONCE (10) + ID (5) + ID (5) +
 NOTIFY (11) + NONE (0) total length : 192
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, processing
 hash payload
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, processing
 SA payload
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, processing
 nonce payload
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, processing
 ID payload
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, processing
 ID payload
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, processing
 notify payload
Feb 22 01:39:59 [IKEv1]: Group = 192.168.1.2, IP = 192.168.1.2, Responder forcin
g change of IPSec rekeying duration from 28800 to 3600 seconds
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, loading al
l IPSEC SAs
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, Generating
 Quick Mode Key!
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, Generating
 Quick Mode Key!
Feb 22 01:39:59 [IKEv1]: Group = 192.168.1.2, IP = 192.168.1.2, Security negotia
tion complete for LAN-to-LAN Group (192.168.1.2)  Initiator, Inbound SPI = 0x810
04014, Outbound SPI = 0x07502a09
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, oakley con
structing final quick mode
Feb 22 01:39:59 [IKEv1]: IP = 192.168.1.2, IKE_DECODE SENDING Message (msgid=270
72fbd) with payloads : HDR + HASH (8) + NONE (0) total length : 72
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, IKE got a
KEY_ADD msg for SA: SPI = 0x07502a09
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, Pitcher: r
eceived KEY_UPDATE, spi 0x81004014
Feb 22 01:39:59 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, Starting P
2 rekey timer: 3060 seconds.
Feb 22 01:39:59 [IKEv1]: Group = 192.168.1.2, IP = 192.168.1.2, PHASE 2 COMPLETE
D (msgid=27072fbd)
Feb 22 01:40:14 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, Sending ke
ep-alive of type DPD R-U-THERE (seq number 0x280e6479)
Feb 22 01:40:14 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, constructi
ng blank hash payload
Feb 22 01:40:14 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, constructi
ng qm hash payload
Feb 22 01:40:14 [IKEv1]: IP = 192.168.1.2, IKE_DECODE SENDING Message (msgid=8fb
a0b26) with payloads : HDR + HASH (8) + NOTIFY (11) + NONE (0) total length : 80
Feb 22 01:40:14 [IKEv1]: IP = 192.168.1.2, IKE_DECODE RECEIVED Message (msgid=7a
18c21c) with payloads : HDR + HASH (8) + NOTIFY (11) + NONE (0) total length : 8
0
Feb 22 01:40:14 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, processing
 hash payload
Feb 22 01:40:14 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, processing
 notify payload
Feb 22 01:40:14 [IKEv1 DEBUG]: Group = 192.168.1.2, IP = 192.168.1.2, Received k
eep-alive of type DPD R-U-THERE-ACK (seq number 0x280e6479)


pixfirewall#debug crypto ipsec 7
IPSEC: New embryonic SA created @ 0x01B84200,
    SCB: 0x028BB1D8,
    Direction: inbound
    SPI      : 0xAD0608C2
    Session ID: 0x00000004
    VPIF num  : 0x00000002
    Tunnel type: l2l
    Protocol   : esp
    Lifetime   : 240 seconds
IPSEC: New embryonic SA created @ 0x029956A0,
    SCB: 0x0291BAD0,
    Direction: outbound
    SPI      : 0x9BEF30FB
    Session ID: 0x00000004
    VPIF num  : 0x00000002
    Tunnel type: l2l
    Protocol   : esp
    Lifetime   : 240 seconds
IPSEC: Completed host OBSA update, SPI 0x9BEF30FB
IPSEC: Creating outbound VPN context, SPI 0x9BEF30FB
    Flags: 0x00000005
    SA   : 0x029956A0
    SPI  : 0x9BEF30FB
    MTU  : 1500 bytes
    VCID : 0x00000000
    Peer : 0x00000000
    SCB  : 0x0291BAD0
    Channel: 0x01727178
IPSEC: Completed outbound VPN context, SPI 0x9BEF30FB
    VPN handle: 0x0001C9AC
IPSEC: New outbound encrypt rule, SPI 0x9BEF30FB
    Src addr: 10.1.1.0
    Src mask: 255.255.255.0
    Dst addr: 10.2.1.0
    Dst mask: 255.255.255.0
    Src ports
      Upper: 0
      Lower: 0
      Op   : ignore
    Dst ports
      Upper: 0
      Lower: 0
      Op   : ignore
    Protocol: 0
    Use protocol: false
    SPI: 0x00000000
    Use SPI: false
IPSEC: Completed outbound encrypt rule, SPI 0x9BEF30FB
    Rule ID: 0x029197A8
IPSEC: New outbound permit rule, SPI 0x9BEF30FB
    Src addr: 172.16.1.1
    Src mask: 255.255.255.255
    Dst addr: 192.168.1.2
    Dst mask: 255.255.255.255
    Src ports
      Upper: 0
      Lower: 0
      Op   : ignore
    Dst ports
      Upper: 0
      Lower: 0
      Op   : ignore
    Protocol: 50
    Use protocol: true
    SPI: 0x9BEF30FB
    Use SPI: true
IPSEC: Completed outbound permit rule, SPI 0x9BEF30FB
    Rule ID: 0x02996888
IPSEC: Completed host IBSA update, SPI 0xAD0608C2
IPSEC: Creating inbound VPN context, SPI 0xAD0608C2
    Flags: 0x00000006
    SA   : 0x01B84200
    SPI  : 0xAD0608C2
    MTU  : 0 bytes
    VCID : 0x00000000
    Peer : 0x0001C9AC
    SCB  : 0x028BB1D8
    Channel: 0x01727178
IPSEC: Completed inbound VPN context, SPI 0xAD0608C2
    VPN handle: 0x00020724
IPSEC: Updating outbound VPN context 0x0001C9AC, SPI 0x9BEF30FB
    Flags: 0x00000005
    SA   : 0x029956A0
    SPI  : 0x9BEF30FB
    MTU  : 1500 bytes
    VCID : 0x00000000
    Peer : 0x00020724
    SCB  : 0x0291BAD0
    Channel: 0x01727178
IPSEC: Completed outbound VPN context, SPI 0x9BEF30FB
    VPN handle: 0x0001C9AC
IPSEC: Completed outbound inner rule, SPI 0x9BEF30FB
    Rule ID: 0x029197A8
IPSEC: Completed outbound outer SPD rule, SPI 0x9BEF30FB
    Rule ID: 0x02996888
IPSEC: New inbound tunnel flow rule, SPI 0xAD0608C2
    Src addr: 10.2.1.0
    Src mask: 255.255.255.0
    Dst addr: 10.1.1.0
    Dst mask: 255.255.255.0
    Src ports
      Upper: 0
      Lower: 0
      Op   : ignore
    Dst ports
      Upper: 0
      Lower: 0
      Op   : ignore
    Protocol: 0
    Use protocol: false
    SPI: 0x00000000
    Use SPI: false
IPSEC: Completed inbound tunnel flow rule, SPI 0xAD0608C2
    Rule ID: 0x02918E30
IPSEC: New inbound decrypt rule, SPI 0xAD0608C2
    Src addr: 192.168.1.2
    Src mask: 255.255.255.255
    Dst addr: 172.16.1.1
    Dst mask: 255.255.255.255
    Src ports
      Upper: 0
      Lower: 0
      Op   : ignore
    Dst ports
      Upper: 0
      Lower: 0
      Op   : ignore
    Protocol: 50
    Use protocol: true
    SPI: 0xAD0608C2
    Use SPI: true
IPSEC: Completed inbound decrypt rule, SPI 0xAD0608C2
    Rule ID: 0x02997CD0
IPSEC: New inbound permit rule, SPI 0xAD0608C2
    Src addr: 192.168.1.2
    Src mask: 255.255.255.255
    Dst addr: 172.16.1.1
    Dst mask: 255.255.255.255
    Src ports
      Upper: 0
      Lower: 0
      Op   : ignore
    Dst ports
      Upper: 0
      Lower: 0
      Op   : ignore
    Protocol: 50
    Use protocol: true
    SPI: 0xAD0608C2
    Use SPI: true
IPSEC: Completed inbound permit rule, SPI 0xAD0608C2
    Rule ID: 0x029964F0

Remote IOS-router - debug-uitvoer 

Router#debug crypto isakmp
*Feb 22 13:51:57.319: ISAKMP (0:0): received packet from 172.16.1.1 dport 500 sp
ort 500 Global (N) NEW SA
*Feb 22 13:51:57.319: ISAKMP: Created a peer struct for 172.16.1.1, peer port 50
0
*Feb 22 13:51:57.319: ISAKMP: New peer created peer = 0x64C2864C peer_handle = 0
x80000005
*Feb 22 13:51:57.319: ISAKMP: Locking peer struct 0x64C2864C, IKE refcount 1 for
 crypto_isakmp_process_block
*Feb 22 13:51:57.319: ISAKMP: local port 500, remote port 500
*Feb 22 13:51:57.323: insert sa successfully sa = 65166F40
*Feb 22 13:51:57.323: ISAKMP:(0:0:N/A:0):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
*Feb 22 13:51:57.323: ISAKMP:(0:0:N/A:0):Old State = IKE_READY  New State = IKE_
R_MM1

*Feb 22 13:51:57.323: ISAKMP:(0:0:N/A:0): processing SA payload. message ID = 0
*Feb 22 13:51:57.327: ISAKMP:(0:0:N/A:0): processing vendor id payload
*Feb 22 13:51:57.327: ISAKMP:(0:0:N/A:0): vendor ID seems Unity/DPD but major 19
4 mismatch
*Feb 22 13:51:57.327: ISAKMP:(0:0:N/A:0):found peer pre-shared key matching 172.
16.1.1
*Feb 22 13:51:57.327: ISAKMP:(0:0:N/A:0): local preshared key found
*Feb 22 13:51:57.327: ISAKMP : Scanning profiles for xauth ...
*Feb 22 13:51:57.327: ISAKMP:(0:0:N/A:0):Checking ISAKMP transform 1 against pri
ority 10 policy
*Feb 22 13:51:57.327: ISAKMP:      default group 1
*Feb 22 13:51:57.327: ISAKMP:      encryption DES-CBC
*Feb 22 13:51:57.327: ISAKMP:      hash MD5
*Feb 22 13:51:57.327: ISAKMP:      auth pre-share
*Feb 22 13:51:57.327: ISAKMP:      life type in seconds
*Feb 22 13:51:57.327: ISAKMP:      life duration (VPI) of  0x0 0x1 0x51 0x80
*Feb 22 13:51:57.331: ISAKMP:(0:0:N/A:0):atts are acceptable. Next payload is 3
*Feb 22 13:51:57.415: ISAKMP:(0:1:SW:1): processing vendor id payload
*Feb 22 13:51:57.415: ISAKMP:(0:1:SW:1): vendor ID seems Unity/DPD but major 194
 mismatch
*Feb 22 13:51:57.419: ISAKMP:(0:1:SW:1):Input = IKE_MESG_INTERNAL, IKE_PROCESS_M
AIN_MODE
*Feb 22 13:51:57.419: ISAKMP:(0:1:SW:1):Old State = IKE_R_MM1  New State = IKE_R
_MM1

*Feb 22 13:51:57.423: ISAKMP:(0:1:SW:1): sending packet to 172.16.1.1 my_port 50
0 peer_port 500 (R) MM_SA_SETUP
*Feb 22 13:51:57.423: ISAKMP:(0:1:SW:1):Input = IKE_MESG_INTERNAL, IKE_PROCESS_C
OMPLETE
*Feb 22 13:51:57.423: ISAKMP:(0:1:SW:1):Old State = IKE_R_MM1  New State = IKE_R
_MM2

*Feb 22 13:51:57.427: ISAKMP (0:134217729): received packet from 172.16.1.1 dpor
t 500 sport 500 Global (R) MM_SA_SETUP
*Feb 22 13:51:57.427: ISAKMP:(0:1:SW:1):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
*Feb 22 13:51:57.431: ISAKMP:(0:1:SW:1):Old State = IKE_R_MM2  New State = IKE_R
_MM3

*Feb 22 13:51:57.431: ISAKMP:(0:1:SW:1): processing KE payload. message ID = 0
*Feb 22 13:51:57.539: ISAKMP:(0:1:SW:1): processing NONCE payload. message ID =
0
*Feb 22 13:51:57.539: ISAKMP:(0:1:SW:1):found peer pre-shared key matching 172.1
6.1.1
*Feb 22 13:51:57.543: ISAKMP:(0:1:SW:1):SKEYID state generated
*Feb 22 13:51:57.543: ISAKMP:(0:1:SW:1): processing vendor id payload
*Feb 22 13:51:57.543: ISAKMP:(0:1:SW:1): vendor ID is Unity
*Feb 22 13:51:57.543: ISAKMP:(0:1:SW:1): processing vendor id payload
*Feb 22 13:51:57.543: ISAKMP:(0:1:SW:1): vendor ID seems Unity/DPD but major 46
mismatch
*Feb 22 13:51:57.543: ISAKMP:(0:1:SW:1): vendor ID is XAUTH
*Feb 22 13:51:57.543: ISAKMP:(0:1:SW:1): processing vendor id payload
*Feb 22 13:51:57.547: ISAKMP:(0:1:SW:1): speaking to another IOS box!
*Feb 22 13:51:57.547: ISAKMP:(0:1:SW:1): processing vendor id payload
*Feb 22 13:51:57.547: ISAKMP:(0:1:SW:1):vendor ID seems Unity/DPD but hash misma
tch
*Feb 22 13:51:57.547: ISAKMP:(0:1:SW:1):Input = IKE_MESG_INTERNAL, IKE_PROCESS_M
AIN_MODE
*Feb 22 13:51:57.547: ISAKMP:(0:1:SW:1):Old State = IKE_R_MM3  New State = IKE_R
_MM3

*Feb 22 13:51:57.551: ISAKMP:(0:1:SW:1): sending packet to 172.16.1.1 my_port 50
0 peer_port 500 (R) MM_KEY_EXCH
*Feb 22 13:51:57.551: ISAKMP:(0:1:SW:1):Input = IKE_MESG_INTERNAL, IKE_PROCESS_C
OMPLETE
*Feb 22 13:51:57.551: ISAKMP:(0:1:SW:1):Old State = IKE_R_MM3  New State = IKE_R
_MM4

*Feb 22 13:51:57.559: ISAKMP (0:134217729): received packet from 172.16.1.1 dpor
t 500 sport 500 Global (R) MM_KEY_EXCH
*Feb 22 13:51:57.559: ISAKMP:(0:1:SW:1):Input = IKE_MESG_FROM_PEER, IKE_MM_EXCH
*Feb 22 13:51:57.559: ISAKMP:(0:1:SW:1):Old State = IKE_R_MM4  New State = IKE_R
_MM5

*Feb 22 13:51:57.563: ISAKMP:(0:1:SW:1): processing ID payload. message ID = 0
*Feb 22 13:51:57.563: ISAKMP (0:134217729): ID payload
        next-payload : 8
        type         : 1
        address      : 172.16.1.1
        protocol     : 17
        port         : 500
        length       : 12
*Feb 22 13:51:57.563: ISAKMP:(0:1:SW:1):: peer matches *none* of the profiles
*Feb 22 13:51:57.563: ISAKMP:(0:1:SW:1): processing HASH payload. message ID = 0
*Feb 22 13:51:57.567: ISAKMP:received payload type 17
*Feb 22 13:51:57.567: ISAKMP:(0:1:SW:1): processing vendor id payload
*Feb 22 13:51:57.567: ISAKMP:(0:1:SW:1): vendor ID is DPD
*Feb 22 13:51:57.567: ISAKMP:(0:1:SW:1):SA authentication status:
        authenticated
*Feb 22 13:51:57.567: ISAKMP:(0:1:SW:1):SA has been authenticated with 172.16.1.
1
*Feb 22 13:51:57.567: ISAKMP: Trying to insert a peer 192.168.1.2/172.16.1.1/500
/,  and inserted successfully 64C2864C.
*Feb 22 13:51:57.567: ISAKMP:(0:1:SW:1):Input = IKE_MESG_INTERNAL, IKE_PROCESS_M
AIN_MODE
*Feb 22 13:51:57.567: ISAKMP:(0:1:SW:1):Old State = IKE_R_MM5  New State = IKE_R
_MM5

*Feb 22 13:51:57.571: ISAKMP:(0:1:SW:1):SA is doing pre-shared key authenticatio
n using id type ID_IPV4_ADDR
*Feb 22 13:51:57.571: ISAKMP (0:134217729): ID payload
        next-payload : 8
        type         : 1
        address      : 192.168.1.2
        protocol     : 17
        port         : 500
        length       : 12
*Feb 22 13:51:57.571: ISAKMP:(0:1:SW:1):Total payload length: 12
*Feb 22 13:51:57.575: ISAKMP:(0:1:SW:1): sending packet to 172.16.1.1 my_port 50
0 peer_port 500 (R) MM_KEY_EXCH
*Feb 22 13:51:57.575: ISAKMP:(0:1:SW:1):Input = IKE_MESG_INTERNAL, IKE_PROCESS_C
OMPLETE
*Feb 22 13:51:57.575: ISAKMP:(0:1:SW:1):Old State = IKE_R_MM5  New State = IKE_P
1_COMPLETE

*Feb 22 13:51:57.579: ISAKMP:(0:1:SW:1):Input = IKE_MESG_INTERNAL, IKE_PHASE1_CO
MPLETE
*Feb 22 13:51:57.579: ISAKMP:(0:1:SW:1):Old State = IKE_P1_COMPLETE  New State =
 IKE_P1_COMPLETE

*Feb 22 13:51:57.583: ISAKMP (0:134217729): received packet from 172.16.1.1 dpor
t 500 sport 500 Global (R) QM_IDLE
*Feb 22 13:51:57.583: ISAKMP: set new node 328663488 to QM_IDLE
*Feb 22 13:51:57.587: ISAKMP:(0:1:SW:1): processing HASH payload. message ID = 3
28663488
*Feb 22 13:51:57.587: ISAKMP:(0:1:SW:1): processing SA payload. message ID = 328
663488
*Feb 22 13:51:57.587: ISAKMP:(0:1:SW:1):Checking IPSec proposal 1
*Feb 22 13:51:57.587: ISAKMP: transform 1, ESP_DES
*Feb 22 13:51:57.591: ISAKMP:   attributes in transform:
*Feb 22 13:51:57.591: ISAKMP:      SA life type in seconds
*Feb 22 13:51:57.591: ISAKMP:      SA life duration (basic) of 28800
*Feb 22 13:51:57.591: ISAKMP:      SA life type in kilobytes
*Feb 22 13:51:57.591: ISAKMP:      SA life duration (VPI) of  0x0 0x46 0x50 0x0
*Feb 22 13:51:57.595: ISAKMP:      encaps is 1 (Tunnel)
*Feb 22 13:51:57.595: ISAKMP:      authenticator is HMAC-MD5
*Feb 22 13:51:57.595: ISAKMP:(0:1:SW:1):atts are acceptable.
*Feb 22 13:51:57.595: ISAKMP:(0:1:SW:1): processing NONCE payload. message ID =
328663488
*Feb 22 13:51:57.595: ISAKMP:(0:1:SW:1): processing ID payload. message ID = 328
663488
*Feb 22 13:51:57.599: ISAKMP:(0:1:SW:1): processing ID payload. message ID = 328
663488
*Feb 22 13:51:57.599: ISAKMP:(0:1:SW:1): processing NOTIFY INITIAL_CONTACT proto
col 1
        spi 0, message ID = 328663488, sa = 65166F40
*Feb 22 13:51:57.599: ISAKMP:(0:1:SW:1):SA authentication status:
        authenticated
*Feb 22 13:51:57.599: ISAKMP:(0:1:SW:1): Process initial contact,
bring down existing phase 1 and 2 SA's with local 192.168.1.2 remote 172.16.1.1
remote port 500
*Feb 22 13:51:57.599: ISAKMP:(0:1:SW:1): asking for 1 spis from ipsec
*Feb 22 13:51:57.603: ISAKMP:(0:1:SW:1):Node 328663488, Input = IKE_MESG_FROM_PE
ER, IKE_QM_EXCH
*Feb 22 13:51:57.603: ISAKMP:(0:1:SW:1):Old State = IKE_QM_READY  New State = IK
E_QM_SPI_STARVE
*Feb 22 13:51:57.603: ISAKMP: received ke message (2/1)
*Feb 22 13:51:57.611: ISAKMP: Locking peer struct 0x64C2864C, IPSEC refcount 1 f
or for stuff_ke
*Feb 22 13:51:57.611: ISAKMP:(0:1:SW:1): Creating IPSec SAs
*Feb 22 13:51:57.611:         inbound SA from 172.16.1.1 to 192.168.1.2 (f/i)  0
/ 0
        (proxy 10.1.1.0 to 10.2.1.0)
*Feb 22 13:51:57.611:         has spi 0x1BB01835 and conn_id 0 and flags 2
*Feb 22 13:51:57.611:         lifetime of 28800 seconds
*Feb 22 13:51:57.611:         lifetime of 4608000 kilobytes
*Feb 22 13:51:57.611:         has client flags 0x0
*Feb 22 13:51:57.611:         outbound SA from 192.168.1.2 to 172.16.1.1 (f/i) 0
/0
        (proxy 10.2.1.0 to 10.1.1.0)
*Feb 22 13:51:57.611:         has spi 1995623635 and conn_id 0 and flags A
*Feb 22 13:51:57.611:         lifetime of 28800 seconds
*Feb 22 13:51:57.611:         lifetime of 4608000 kilobytes
*Feb 22 13:51:57.611:         has client flags 0x0
*Feb 22 13:51:57.615: ISAKMP:(0:1:SW:1): sending packet to 172.16.1.1 my_port 50
0 peer_port 500 (R) QM_IDLE
*Feb 22 13:51:57.615: ISAKMP:(0:1:SW:1):Node 328663488, Input = IKE_MESG_FROM_IP
SEC, IKE_SPI_REPLY
*Feb 22 13:51:57.615: ISAKMP:(0:1:SW:1):Old State = IKE_QM_SPI_STARVE  New State
 = IKE_QM_R_QM2
*Feb 22 13:51:57.619: ISAKMP: Locking peer struct 0x64C2864C, IPSEC refcount 2 f
or from create_transforms
*Feb 22 13:51:57.619: ISAKMP: Unlocking IPSEC struct 0x64C2864C from create_tran
sforms, count 1
*Feb 22 13:51:57.631: ISAKMP (0:134217729): received packet from 172.16.1.1 dpor
t 500 sport 500 Global (R) QM_IDLE
*Feb 22 13:51:57.635: ISAKMP:(0:1:SW:1):deleting node 328663488 error FALSE reas
on "QM done (await)"
*Feb 22 13:51:57.635: ISAKMP:(0:1:SW:1):Node 328663488, Input = IKE_MESG_FROM_PE
ER, IKE_QM_EXCH
*Feb 22 13:51:57.635: ISAKMP:(0:1:SW:1):Old State = IKE_QM_R_QM2  New State = IK
E_QM_PHASE2_COMPLETE
Router#debug crypto ipsec
*Feb 22 13:57:41.187: IPSEC(validate_proposal_request): proposal part #1,
  (key eng. msg.) INBOUND local= 192.168.1.2, remote= 172.16.1.1,
    local_proxy= 10.2.1.0/255.255.255.0/0/0 (type=4),
    remote_proxy= 10.1.1.0/255.255.255.0/0/0 (type=4),
    protocol= ESP, transform= esp-des esp-md5-hmac  (Tunnel),
    lifedur= 0s and 0kb,
    spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x2
*Feb 22 13:57:41.187: Crypto mapdb : proxy_match
        src addr     : 10.2.1.0
        dst addr     : 10.1.1.0
        protocol     : 0
        src port     : 0
        dst port     : 0
*Feb 22 13:57:41.191: IPSEC(key_engine): got a queue event with 1 kei messages
*Feb 22 13:57:41.191: IPSEC(key_engine): got a queue event with 1 kei messages
*Feb 22 13:57:41.191: IPSEC(spi_response): getting spi 2616144123 for SA
        from 192.168.1.2 to 172.16.1.1 for prot 3
*Feb 22 13:57:41.199: IPSEC(key_engine): got a queue event with 2 kei messages
*Feb 22 13:57:41.199: IPSEC(initialize_sas): ,
  (key eng. msg.) INBOUND local= 192.168.1.2, remote= 172.16.1.1,
    local_proxy= 10.2.1.0/255.255.255.0/0/0 (type=4),
    remote_proxy= 10.1.1.0/255.255.255.0/0/0 (type=4),
    protocol= ESP, transform= esp-des esp-md5-hmac  (Tunnel),
    lifedur= 28800s and 4608000kb,
    spi= 0x9BEF30FB(2616144123), conn_id= 0, keysize= 0, flags= 0x2
*Feb 22 13:57:41.203: IPSEC(initialize_sas): ,
  (key eng. msg.) OUTBOUND local= 192.168.1.2, remote= 172.16.1.1,
    local_proxy= 10.2.1.0/255.255.255.0/0/0 (type=4),
    remote_proxy= 10.1.1.0/255.255.255.0/0/0 (type=4),
    protocol= ESP, transform= esp-des esp-md5-hmac  (Tunnel),
    lifedur= 28800s and 4608000kb,
    spi= 0xAD0608C2(2902853826), conn_id= 0, keysize= 0, flags= 0xA
*Feb 22 13:57:41.203: Crypto mapdb : proxy_match
        src addr     : 10.2.1.0
        dst addr     : 10.1.1.0
        protocol     : 0
        src port     : 0
        dst port     : 0
*Feb 22 13:57:41.203: IPSec: Flow_switching Allocated flow for sibling 80000005
*Feb 22 13:57:41.207: IPSEC(policy_db_add_ident): src 10.2.1.0, dest 10.1.1.0, d
est_port 0

*Feb 22 13:57:41.207: IPSEC(create_sa): sa created,
  (sa) sa_dest= 192.168.1.2, sa_proto= 50,
    sa_spi= 0x9BEF30FB(2616144123),
    sa_trans= esp-des esp-md5-hmac , sa_conn_id= 2002
*Feb 22 13:57:41.207: IPSEC(create_sa): sa created,
  (sa) sa_dest= 172.16.1.1, sa_proto= 50,
    sa_spi= 0xAD0608C2(2902853826),
    sa_trans= esp-des esp-md5-hmac , sa_conn_id= 2001
*Feb 22 13:57:41.475: IPSEC(key_engine): got a queue event with 1 kei messages
*Feb 22 13:57:41.475: IPSEC(key_engine_enable_outbound): rec'd enable notify fro
m ISAKMP
*Feb 22 13:57:41.475: IPSEC(key_engine_enable_outbound): enable SA with spi 2902
853826/50

Gerelateerde informatie

Revisiegeschiedenis

Revisie Publicatiedatum Opmerkingen
1.0
16-Feb-2007
Eerste vrijgave

Was dit document nuttig?

FeedbackFeedback

Contact Cisco

Dit document is van toepassing op deze producten