Netwerkprotocollen
Cisco IP-telefoon 8800-serie ondersteunt diverse industriestandaard en Cisco-netwerkprotocollen die vereist zijn voor gesproken communicatie. In de volgende tabel ziet u een overzicht van de netwerkprotocollen die door de telefoons worden ondersteund.
Netwerkprotocol |
Doel |
Opmerkingen over gebruik |
||
---|---|---|---|---|
Bluetooth |
Bluetooth is een draadloos persoonlijk netwerk-protocol (WPAN) dat aangeeft hoe apparaten over korte afstand communiceren. |
Cisco IP-telefoons 8845, 8865 en 8851 ondersteunen Bluetooth 4.1. Cisco IP-telefoon 8861 ondersteunt Bluetooth 4.0. Cisco IP Phones 8811 en 8841 ondersteunen Bluetooth niet. |
||
Bootstrap Protocol (BootP) |
BootP schakelt een netwerkapparaat, zoals Cisco IP-telefoon, in om bepaalde opstartgegevens te detecteren, zoals het IP-adres. |
— |
||
Cisco Discovery Protocol (CDP) |
CDP is een apparaatdetectieprotocol dat werkt op alle door Cisco gefabriceerde apparatuur. Een apparaat kan CDP gebruiken om zijn bestaan aan te geven voor andere apparaten en informatie over andere apparaten te ontvangen in het netwerk. |
Cisco IP-telefoons gebruiken CDP om informatie te communiceren als de hulp-VLAN-id, voedingsbeheerdetails per poort en QoS-configuratiegegeven (Quality of Service) met de Cisco Catalyst-switch. |
||
Dynamic Host Configuration Protocol (DHCP) |
DHCP wijst een IP-adres dynamisch toe aan netwerkapparaten. Met DHCP kunt u een IP-telefoon aansluiten op het netwerk en de telefoon laten werken zonder dat u handmatig een IP-adres moet toewijzen of aanvullende netwerkparameters moet configureren. |
DHCP is standaard ingeschakeld. Indien uitgeschakeld, moet u het IP-adres, subnetmasker en gateway lokaal handmatig op elke telefoon configureren.
|
||
Hypertext Transfer Protocol (HTTP) |
HTTP is de standaardmanier voor informatie-overdracht en het verplaatsen van documenten over internet en het web. |
Cisco IP-telefoons gebruiken het HTTP-protocol voor XML-services, het inrichten van de telefoon, het upgraden van de telefoon en voor het oplossen van problemen. |
||
Hypertext Transfer Protocol Secure (HTTPS) |
Hypertext Transfer Protocol Secure (HTTPS) is een combinatie van Hypertext Transfer Protocol met het SSL/TLS-protocol voor het leveren van codering en veilige identificatie van servers. |
Sommige webtoepassingen ondersteunen zowel HTTP- als HTTPS-protocollen. Cisco IP Phones die HTTPS ondersteunen gebruiken de HTTPS-URL. |
||
IEEE 802,1X |
Met de IEEE 802.1X-standaard wordt een protocol voor client-/servergebaseerd toegangsbeheer en verificatie gedefinieerd dat ervoor zorgt dat niet-geautoriseerde clients geen verbinding kunnen maken met een LAN via openbaar toegankelijke poorten. Totdat de client wordt geverifieerd, staat 802.1X-toegangsbeheer alleen EAPOL-verkeer (Extensible Authentication Protocol over LAN) toe via de poort waarmee de client is verbonden. Als de verificatie is gelukt, kan normaal verkeer de poort passeren. |
Cisco IP-telefoon implementeert de IEEE 802.1X-standaard door ondersteuning te bieden voor de volgende verificatiemethoden: EAP-FAST en EAP-TLS. Wanneer 802.1X-verificatie wordt ingeschakeld op de telefoon, moet u de pc-poort en spraak-VLAN uitschakelen. |
||
IEEE 802.11n/802.11ac |
De IEEE 802.11-standaard geeft aan hoe apparaten communiceren via een draadloos LAN-netwerk (WLAN). 802.11n werkt met de 2,4-GHz en 5-GHz band en 802.11ac werkt met de 5-GHz band. |
De 802.11-interface is een implementatieoptie voor het geval de Ethernet-bekabeling niet beschikbaar of ongewenst is. Alleen Cisco IP-telefoons 8861 en 8865 ondersteunen WLAN. |
||
Internet Protocol (IP) |
IP is een berichtprotocol dat pakketten adresseert en verzendt via het netwerk. |
Als netwerkapparaten willen communiceren met IP, moeten ze een toegewezen IP-adres, subnet en gateway hebben. IP-adressen, subnetten en gateway-id's worden automatisch toegewezen als u de Cisco IP-telefoon gebruikt met Dynamic Host Configuration Protocol (DHCP). Als u DHCP niet gebruikt, moet u deze eigenschappen lokaal handmatig aan elke telefoon toewijzen. |
||
Link Layer Discovery Protocol (LLDP) |
LLDP is een gestandaardiseerd netwerkdetectieprotocol (vergelijkbaar met CDP) dat wordt ondersteund op een aantal apparaten van Cisco en derden. |
Cisco IP-telefoon ondersteunt LLDP op de pc-poort. |
||
Link Layer Discovery Protocol-Media Endpoint Devices (LLDP-MED) |
LLDP-MED is een uitbreiding van de LLDP-standaard voor spraakproducten. |
Cisco IP-telefoon ondersteunt LLDP-MED op de SW-poort voor het communiceren van informatie zoals:
Voor meer informatie over ondersteuning voor LLDP-MED raadpleegt u de whitepaper LLDP-MED and Cisco Discovery Protocol: http://www.cisco.com/en/US/tech/tk652/tk701/technologies_white_paper0900aecd804cd46d.shtml |
||
Real-Time Transport Protocol (RTP) |
RTP is een standaardprotocol voor het transporteren van real-time gegevens, zoals interactieve spraak via gegevensnetwerken. |
Cisco IP-telefoons gebruiken het RTP-protocol voor het verzenden en ontvangen van real-time spraakverkeer van andere telefoons en gateways. |
||
Real-Time Control Protocol (RTCP) |
RTCP werkt samen met RTP voor het leveren van QoS-gegevens (zoals jitter, latentie en retourvertraging) op RTP-stromen. |
RTCP is standaard uitgeschakeld. |
||
Session Description Protocol (SDP) |
SDP is het gedeelte van het SIP-protocol dat bepaalt welke parameters tijdens een verbinding beschikbaar zijn tussen twee eindpunten. Conferenties worden opgezet met behulp van de SDP-voorzieningen die worden ondersteund door alle eindpunten van de conferentie. |
SDP-voorzieningen, zoals codectypen, DTMF-detectie en comfortabel geluid, worden normaal gesproken wereldwijd geconfigureerd door een oproepbeheersysteem van derden of de gebruikte Media Gateway. Sommige SIP-eindpunten staan mogelijk configuratie toe van deze parameters op het eindpunt zelf. |
||
Session Initiation Protocol (SIP) |
SIP is de IETF-standaard (Internet Engineering Task Force) voor multimediaconferentie via IP. SIP is een op ASCII gebaseerd controleprotocol op de applicatielaag (gedefinieerd in RFC 3261), dat kan worden gebruikt om gesprekken tussen twee of meer eindpunten tot stand te brengen, te onderhouden en te beëindigen. |
Net als andere VoIP-protocollen levert SIP functies als signalering en sessiebeheer binnen een telefonienetwerk met pakketten. Met signalering kunnen gespreksgegevens over netwerkgrenzen heen worden verzonden. Sessiebeheer biedt de mogelijkheid om de kenmerken van een end-to-end gesprek te beheren. Cisco IP-telefoons ondersteunen het SIP-protocol wanneer de telefoons werken met alleen IPv6, alleen IPv4, of met zowel IPv4 als IPv6. |
||
Transmission Control Protocol (TCP) |
TCP is een verbindingsgericht transportprotocol. |
Cisco IP-telefoons gebruiken TCP om verbinding te maken met een oproepbeheersysteem van derden en voor toegang tot XML-services. |
||
Transport Layer Security (TLS) |
TLS is een standaardprotocol voor het beveiligen en verifiëren van communicatie. |
Nadat de beveiliging is geïmplementeerd, gebruiken Cisco IP-telefoons het TLS-protocol voor veilige registratie bij het oproepbeheersysteem van derden. |
||
Trivial File Transfer Protocol (TFTP) |
TFTP zorgt dat u bestanden over het netwerk kunt verzenden. Op de Cisco IP-telefoon kunt u met TFTP een configuratiebestand ophalen dat specifiek is voor het telefoontype. |
TFTP vereist een TFTP-server in uw netwerk, die automatisch kan worden aangegeven door de DHCP-server. |
||
User Datagram Protocol (UDP) |
UDP is een verbindingsloos berichtenprotocol voor het leveren van gegevenspakketten. |
UDP wordt alleen gebruikt voor RTP-stromen. SIP-signalering op de telefoons ondersteunt niet UDP. |