Abordagem do código de falha ACI F0321, F0323, F0325: não íntegro - liderança divergente ou degradada do cluster

Introdução

Este documento descreve as próximas etapas para remediar a falha abaixo:

"Code" : "F0321",
"Description" : "Controller <id> is unhealthy because: Data Layer Partially Degraded Leadership",
"Dn" : "topology/pod-<POD-ID>/node-<NODE-ID>/av/node-<NODE-ID>/fault-F0321",

"Code" : "F0321",
"Description" : "Controller 3 is unhealthy because: Data Layer Partially Diverged"
"Dn" : "topology/pod-<POD-ID>/node-<NODE-ID>/av/node-<NODE-ID>/fault-F0321",

"Code" : "F0325",
"Description" : "Connectivity has been lost to the leader for some data subset(s) of a service on <node >, the service may have unexpectedly restarted or failed",
"Dn" : "topology/pod-<POD-ID>/node-<NODE-ID>/av/node-<NODE-ID>/fault-F0325",

"Code" : "F0323",
"Description" : "Lost connectivity to leader for some data subset(s) of Access <Service> on <controller >",
"Dn" : "topology/pod-<POD-ID>/node-<NODE-ID>/av/node-<NODE-ID>/fault-F0323",

Se você tiver uma malha da ACI conectada à Intersight, uma solicitação de serviço foi gerada em seu nome para indicar que instâncias dessa falha foram encontradas na malha da ACI conectada à Intersight.

Essa falha específica é gerada quando o cluster APIC não está íntegro. Camada de dados parcialmente divergida é vista quando um dos compartilhamentos/réplicas está inoperante, o que é indicado por "\" em "saída rvread de acidiag". Essa falha também pode ser observada quando a réplica ou o banco de dados está completamente ausente do APIC indicado por "X". precisamos corrigir qualquer problema subjacente e restaurar a integridade do cluster.  

Isso está sendo monitorado ativamente como parte dos contratos de ACI proativos.

Detalhes adicionais

NÃO tente nenhuma etapa intrusiva, como desligar, recarregar ou desativar para solucionar o problema de cluster, se a estrutura estiver em produção. Colete e carregue os arquivos TS no caso TAC para descobrir as etapas exatas para restaurar o cluster APIC. 

Início rápido para solucionar falha

1. Comando "cluster acidiag"

Ao executar esse comando, ele faria várias verificações, incluindo a conectividade com os APICs. Todos os resultados do teste devem retornar OK. Se notarmos algo diferente de OK, precisaremos investigar a causa disso. 

######## Sample output on a healthy cluster ########

apic1# acidiag cluster
Admin password:

Running...

Checking Wiring and UUID: OK
Checking AD Processes: Running
Checking All Apics in Commission State: OK
Checking All Apics in Active State: OK
Checking Fabric Nodes: OK
Checking Apic Fully-Fit: OK
Checking Shard Convergence: OK
Checking Leadership Degration: Optimal leader for all shards
Ping OOB IPs:
APIC-1: 10.197.204.149 - OK
APIC-2: 10.197.204.150 - OK
APIC-3: 10.197.204.151 - OK
Ping Infra IPs:
APIC-1: 10.0.0.1 - OK
APIC-2: 10.0.0.2 - OK
APIC-3: 10.0.0.3 - OK
Checking APIC Versions: Same (5.2(4d))
Checking SSL: OK
Full file system(s): None

Done!

######## Sample output on a unhealthy cluster ########

apic1# acidiag cluster
Admin password:

Running...

Checking Wiring and UUID: switch(302) reports apic(3) has wireIssue: unapproved-ctrlr
Checking AD Processes: Running
Checking All Apics in Commission State: OK
Checking All Apics in Active State: OK
Checking Fabric Nodes: OK
Checking Apic Fully-Fit: OK
Checking Shard Convergence: OK
Checking Leadership Degration: Non optimal leader for shards : 3:1,3:2,3:4,3:5,3:7,3:8,3:10,3:11,3:13,3:14,3:16,3:17,3:19,3:20,3:22,3:23,3:25,3:26,3:28,3:29,3:31,3:32,6:1,6:2,6:4,6:5,6:7,6:8,6:10,6:11,6:13,6:14,6:16,6:17,6:19,6:20,6:22,6:23,6:25,6:26,6:28,6:29,6:31,6:32,9:1,9:2,9:4,9:5,9:7,9:8,9:10,9:11,9:13,9:14,9:16,9:17,9:19,9:20,9:22,9:23,9:25,9:26,9:28,9:29,9:31,9:32,10:1,10:2,10:4,10:5,10:7,10:8,10:10,10:11,10:13,10:14,10:16,10:17,10:19,10:20,10:22,10:23,10:25,10:26,10:28,10:29,10:31,10:32,11:1,11:2,11:4,11:5,11:7,11:8,11:10,11:11,11:13,11:14,11:16,11:17,11:19,11:20,11:22,11:23,11:25,11:26,11:28,11:29,11:31,11:32,14:1,14:2,14:4,14:5,14:7,14:8,14:10,14:11,14:13,14:14,14:16,14:17,14:19,14:20,14:22,14:23,14:25,14:26,14:28,14:29,14:31,14:32,16:1,16:2,16:4,16:5,16:7,16:8,16:10,16:11,16:13,16:14,16:16,16:17,16:19,16:20,16:22,16:23,16:25,16:26,16:28,16:29,16:31,16:32,22:1,22:2,22:4,22:5,22:7,22:8,22:10,22:11,22:13,22:14,22:16,22:17,22:19,22:20,22:22,22:23,22:25,22:26,22:28,22:29,22:31,22:32,23:1,23:2,23:4,23:5,23:7,23:8,23:10,23:11,23:13,23:14,23:16,23:17,23:19,23:20,23:22,23:23,23:25,23:26,23:28,23:29,23:31,23:32,33:1,34:1,34:2,34:4,34:5,34:7,34:8,34:10,34:11,34:13,34:14,34:16,34:17,34:19,34:20,34:22,34:23,34:25,34:26,34:28,34:29,34:31,34:32,35:1,35:2,35:4,35:5,35:7,35:8,35:10,35:11,35:13,35:14,35:16,35:17,35:19,35:20,35:22,35:23,35:25,35:26,35:28,35:29,35:31,35:32,36:1,39:1,39:2,39:4,39:5,39:7,39:8,39:10,39:11,39:13,39:14,39:16,39:17,39:19,39:20,39:22,39:23,39:25,39:26,39:28,39:29,39:31,39:32
Ping OOB IPs:
APIC-1: 10.197.204.184 - OK
APIC-2: 10.197.204.185 - OK
APIC-3: 10.197.204.186 - OK
Ping Infra IPs:
APIC-1: 10.0.0.1 - OK
APIC-2: 10.0.0.2 - OK
APIC-3: 10.0.0.3 - OK
Checking APIC Versions: Same (5.2(3e))
Checking SSL: OK
Full file system(s): None

Done!

2. Integridade do SSD APIC

Verifique se a SSD do APIC está íntegra e se uma dessas falhas não foi detectada na estrutura da ACI - F2730, F2731 e F2732. A seguir estão os comandos a serem executados no APIC CLI para descobrir se alguma dessas falhas existe OU se a mesma pode ser verificada na GUI (Sistema > Falhas)

• show faults code F2730 controller
• show faults code F2731 controller
• show faults code F2732 controller

#####  Example: 

# faultRecord
ack             : no
cause           : equipment-wearout
changeSet       : available:unspecified, blocks:unspecified, capUtilized:0, device:Solid State Device, fileSystem:/dev/sdb, firmwareVersion:Dxxxxxxx, mediaWearout:1, model:INTEL SSDSC2BB120G4, mount:/dev/sdb, name:/dev/sdb, operSt:ok, serial:ABCDxxxxxxxxxxxXYZ, used:unspecified
childAction     : 
code            : F2730
created         : 2022-01-10T03:13:08.026+00:00
delegated       : no
descr           : Storage unit /dev/sdb on Node 3 with hostname apic1.cisco.com mounted at /dev/sdb has 1% life remaining
dn              : topology/pod-2/node-3/sys/ch/p-[/dev/sdb]-f-[/dev/sdb]/fault-F2730
domain          : infra
highestSeverity : warning
lastTransition  : 2022-01-10T03:13:08.026+00:00
lc              : raised
occur           : 1
origSeverity    : warning
prevSeverity    : warning
rule            : eqpt-storage-wearout-warning
severity        : warning
status          : 
subject         : equipment-wearout
type            : operational


# faultRecord
ack             : no
cause           : equipment-wearout
changeSet       : available:unspecified, blocks:unspecified, capUtilized:0, device:Solid State Device, fileSystem:/dev/sdb, firmwareVersion:Dxxxxxxx, mediaWearout:1, model:INTEL SSDSC2BB120G4, mount:/dev/sdb, name:/dev/sdb, operSt:ok, serial:ABCDxxxxxxxxxxxXYZ, used:unspecified
childAction     : 
code            : F2731
created         : 2022-01-10T03:13:08.026+00:00
delegated       : no
descr           : Storage unit /dev/sdb on Node 3 mounted at /dev/sdb has 1% life remaining
dn              : topology/pod-2/node-3/sys/ch/p-[/dev/sdb]-f-[/dev/sdb]/fault-F2731
domain          : infra
highestSeverity : major
lastTransition  : 2022-01-10T03:13:08.026+00:00
lc              : raised
occur           : 1
origSeverity    : major
prevSeverity    : major
rule            : eqpt-storage-wearout-major
severity        : major
status          : 
subject         : equipment-wearout
type            : operational

3. Status de Processos DME

Verifique se todos os processos DME estão em execução

        Execute ps -aux | egrep "svc|nginx.bin|dhcp"

        Saída esperada abaixo:

apic1# ps -ef | egrep "svc|nginx.bin|dhcp"
root      3063     1  5 22:08 ?        00:04:40 /mgmt//bin/nginx.bin -p /data//nginx/
root      8889     1  7 21:53 ?        00:06:43 /mgmt//bin/svc_ifc_appliancedirector.bin --x
ifc       8891     1  1 21:53 ?        00:01:29 /mgmt//bin/svc_ifc_policydist.bin --x
root      8893     1  2 21:53 ?        00:02:28 /mgmt//bin/svc_ifc_bootmgr.bin --x
ifc       8894     1  1 21:53 ?        00:01:41 /mgmt//bin/svc_ifc_vmmmgr.bin --x
ifc       8895     1  2 21:53 ?        00:02:14 /mgmt//bin/svc_ifc_topomgr.bin --x
ifc       8901     1  2 21:53 ?        00:02:22 /mgmt//bin/svc_ifc_observer.bin --x
root      8903     1  1 21:53 ?        00:01:40 /mgmt//bin/svc_ifc_plgnhandler.bin --x
ifc       8914     1  1 21:53 ?        00:01:34 /mgmt//bin/svc_ifc_domainmgr.bin --x
ifc       8915     1  2 21:53 ?        00:02:04 /mgmt//bin/svc_ifc_dbgr.bin --x
ifc       8917     1  1 21:53 ?        00:01:34 /mgmt//bin/svc_ifc_edmgr.bin --x
ifc       8918     1  1 21:53 ?        00:01:22 /mgmt//bin/svc_ifc_vtap.bin --x
ifc       8922     1  2 21:53 ?        00:02:09 /mgmt//bin/svc_ifc_eventmgr.bin --x
ifc       8925     1  3 21:53 ?        00:03:15 /mgmt//bin/svc_ifc_reader.bin --x
ifc       8929     1  1 21:53 ?        00:01:34 /mgmt//bin/svc_ifc_idmgr.bin --x
ifc       8930     1  1 21:53 ?        00:01:26 /mgmt//bin/svc_ifc_licensemgr.bin --x
ifc       8937     1  3 21:53 ?        00:03:18 /mgmt//bin/svc_ifc_policymgr.bin --x
ifc       8941     1  1 21:53 ?        00:01:34 /mgmt//bin/svc_ifc_scripthandler.bin --x
root     11157     1  1 21:54 ?        00:01:29 /mgmt//bin/dhcpd.bin -f -4 -cf /data//dhcp/dhcpd.conf -lf /data//dhcp/dhcpd.lease -pf /var/run//dhcpd.pid --no-pid bond0.3902
root     11170     1  4 21:54 ?        00:04:15 /mgmt//bin/svc_ifc_ae.bin --x
admin    17094 16553  0 23:27 pts/0    00:00:00 grep -E svc|nginx.bin|dhcp

Você pode verificar o código de falha F1419 para DMEs com falha.

apic1# show faults code F1419 history
ID                     : 4294971876
Description            : Service policymgr failed on apic bgl-aci02-apic1 of fabric
                        POD02 with a hostname bgl-aci02-apic1
Severity               : major
DN                     : subj-[topology/pod-1/node-1/sys/proc/proc-
                        policymgr]/fr-4294971876
Created                : 2022-03-21T18:29:20.570+12:00
Code                   : F1419
Type                   : operational
Cause                  : service-failed
Change Set             : id (Old: 5152, New: 0), maxMemAlloc (Old: 1150246912, New:
                        0), operState (Old: up, New: down)
Action                 : creation
Domain                 : infra
Life Cycle             : soaking
Count Fault Occurred   : 1
Acknowledgement Status : no

Próximas etapas:

1. Problemas de conectividade do APIC

Se houver perda de conectividade entre apics, um dos possíveis motivos pode ser problemas de cabeamento. O comando Acidiag Cluster também mostrará que tipo de problemas de fiação estão presentes no link. Aqui estão todos os possíveis problemas de cabeamento:

ctrlr-uuid-mismatch - Incompatibilidade de APIC UUID (ID de APIC duplicada)

fabric-domain-mismatch - O nó adjacente pertence a uma malha diferente

incompatibilidade de fiação - conexão inválida (Leaf to Leaf, Spine to non-leaf, Leaf fabric port to non-spine etc.)

adjetive-not-detected - Nenhuma adjacência LLDP na porta de estrutura

incompatibilidade de infra-vlan - incompatibilidade de infra VLAN entre leaf e APIC.

pod-id-mismatch - Incompatibilidade de ID de pod entre APIC e Leaf

unapproved-ctrlr - o handshake SSL entre o APIC e a folha conectada não foi concluído.

unapproved-serialnumber - detectado um nó que não está presente no DB da Apic.

2. Processo DME Inativo

se a saída da seção de status do processo DME não corresponder à saída esperada. Tente iniciar o DME usando 'acidiag start <DME>'. Por exemplo, se svc_ifc_eventmgr estiver ausente, tente 'acidiag start eventmgr'

apic1# ps -aux | egrep "svc|nginx.bin|dhcp"
root      5112  7.3  0.4 1033952 323180 ?      Ssl  Mar10 3073:27 /mgmt//bin/svc_ifc_appliancedirector.bin --x
ifc       5117  1.7  0.6 1062664 439876 ?      Ssl  Mar10 720:52 /mgmt//bin/svc_ifc_topomgr.bin --x
ifc       5118  2.1  2.2 2164512 1468200 ?     Ssl  Mar10 884:11 /mgmt//bin/svc_ifc_policymgr.bin --x
ifc       5119  1.5  0.3 1115984 256904 ?      Ssl  Mar10 664:51 /mgmt//bin/svc_ifc_licensemgr.bin --x
ifc       5120  1.5  0.5 1088252 356760 ?      Ssl  Mar10 666:26 /mgmt//bin/svc_ifc_edmgr.bin --x
root      5121  1.6  0.6 1125948 423392 ?      Ssl  Mar10 698:11 /mgmt//bin/svc_ifc_bootmgr.bin --x
ifc       5123  2.3  1.2 1474388 800564 ?      Ssl  Mar10 994:15 /mgmt//bin/svc_ifc_eventmgr.bin --x
ifc       5126  1.5  8.2 6032524 5363184 ?     Ssl  Mar10 635:58 /mgmt//bin/svc_ifc_reader.bin --x
root      5130  4.6  0.6 1092480 439580 ?      Ssl  Mar10 1927:08 /mgmt//bin/svc_ifc_ae.bin --x
ifc       5132  1.6  0.8 1312136 567420 ?      Ssl  Mar10 689:43 /mgmt//bin/svc_ifc_vmmmgr.bin --x
ifc       5133  1.5  0.5 1064176 346760 ?      Ssl  Mar10 659:03 /mgmt//bin/svc_ifc_domainmgr.bin --x
ifc       5135  1.8  1.6 1736876 1099924 ?     Ssl  Mar10 770:39 /mgmt//bin/svc_ifc_observer.bin --x
root      5141  1.5  0.7 1092948 458156 ?      Ssl  Mar10 663:41 /mgmt//bin/svc_ifc_plgnhandler.bin --x
ifc       5146  2.0  0.6 1037676 397236 ?      Ssl  Mar10 857:43 /mgmt//bin/svc_ifc_idmgr.bin --x
ifc       5148  1.3  0.3 650596 222336 ?       Ssl  Mar10 580:25 /mgmt//bin/svc_ifc_vtap.bin --x
ifc       5160  1.6  0.6 1098280 453492 ?      Ssl  Mar10 669:17 /mgmt//bin/svc_ifc_scripthandler.bin --x
root      7089  1.4  0.4 856360 315016 ?       Ssl  Mar10 592:04 /mgmt//bin/dhcpd.bin -f -4 -cf /data//dhcp/dhcpd.conf -lf /data//dhcp/dhcpd.lease -pf /var/run//dhcpd.pid --no-pid bond0.3903
admin    29834  0.0  0.0 112800  1780 pts/1    S+   17:22   0:00 grep -E svc|nginx.bin|dhcp
ifc      30432  1.4  0.6 894088 405968 ?       Ssl  Mar17 473:45 /mgmt//bin/svc_ifc_policydist.bin --x
root     31215  2.8  5.2 4503880 3397276 ?     Ssl  Apr05 124:08 /mgmt//bin/nginx.bin -p /data//nginx/

Na saída acima, svc_ifc_dbgr.bin está ausente quando comparado à saída esperada mencionada na seção de status do processo DME. Podemos iniciar o processo usando "acidiag restart dbgr"

apic1# acidiag start dbgr
apic1# ps -aux | egrep "svc|nginx.bin|dhcp"
root      5112  7.3  0.4 1033952 323240 ?      Ssl  Mar10 3073:43 /mgmt//bin/svc_ifc_appliancedirector.bin --x
ifc       5117  1.7  0.6 1062664 439876 ?      Ssl  Mar10 720:56 /mgmt//bin/svc_ifc_topomgr.bin --x
ifc       5118  2.1  2.2 2164512 1468200 ?     Ssl  Mar10 884:16 /mgmt//bin/svc_ifc_policymgr.bin --x
ifc       5119  1.5  0.3 1115984 256904 ?      Ssl  Mar10 664:55 /mgmt//bin/svc_ifc_licensemgr.bin --x
ifc       5120  1.5  0.5 1088252 356760 ?      Ssl  Mar10 666:30 /mgmt//bin/svc_ifc_edmgr.bin --x
root      5121  1.6  0.6 1125948 423392 ?      Ssl  Mar10 698:15 /mgmt//bin/svc_ifc_bootmgr.bin --x
ifc       5123  2.3  1.2 1474388 800784 ?      Ssl  Mar10 994:21 /mgmt//bin/svc_ifc_eventmgr.bin --x
ifc       5126  1.5  8.2 6032524 5363184 ?     Ssl  Mar10 636:01 /mgmt//bin/svc_ifc_reader.bin --x
root      5130  4.6  0.6 1092480 439580 ?      Ssl  Mar10 1927:18 /mgmt//bin/svc_ifc_ae.bin --x
ifc       5132  1.6  0.8 1312136 567420 ?      Ssl  Mar10 689:46 /mgmt//bin/svc_ifc_vmmmgr.bin --x
ifc       5133  1.5  0.5 1064176 346760 ?      Ssl  Mar10 659:07 /mgmt//bin/svc_ifc_domainmgr.bin --x
ifc       5135  1.8  1.6 1736876 1099924 ?     Ssl  Mar10 770:43 /mgmt//bin/svc_ifc_observer.bin --x
root      5141  1.5  0.7 1092948 458156 ?      Ssl  Mar10 663:45 /mgmt//bin/svc_ifc_plgnhandler.bin --x
ifc       5146  2.0  0.6 1037676 397236 ?      Ssl  Mar10 857:48 /mgmt//bin/svc_ifc_idmgr.bin --x
ifc       5148  1.3  0.3 650596 222336 ?       Ssl  Mar10 580:28 /mgmt//bin/svc_ifc_vtap.bin --x
ifc       5160  1.6  0.6 1098280 453492 ?      Ssl  Mar10 669:21 /mgmt//bin/svc_ifc_scripthandler.bin --x
root      7089  1.4  0.4 856360 315016 ?       Ssl  Mar10 592:07 /mgmt//bin/dhcpd.bin -f -4 -cf /data//dhcp/dhcpd.conf -lf /data//dhcp/dhcpd.lease -pf /var/run//dhcpd.pid --no-pid bond0.3903
ifc       7609  126  0.5 987404 362824 ?       Ssl  17:25   0:02 /mgmt//bin/svc_ifc_dbgr.bin --x  <=====
admin     7762  0.0  0.0 112800  1668 pts/1    S+   17:26   0:00 grep -E svc|nginx.bin|dhcp
ifc      30432  1.4  0.6 894088 405968 ?       Ssl  Mar17 473:48 /mgmt//bin/svc_ifc_policydist.bin --x
root     31215  2.8  5.2 4503880 3397252 ?     Ssl  Apr05 124:13 /mgmt//bin/nginx.bin -p /data//nginx/

Depois de executar "Acidiag start dbgr", o processo começou novamente. Se você não vir um processo de introdução, entre em contato com o TAC para obter mais soluções de problemas.

4. Verificar Arquivos Principais

Execute show core, se houver arquivos principais, carregue-os no SR.

apic1# show core                   
 Node  Module  Creation-Time  File-Size  Service       Process  Original-Location   Exit-Code  Death-Reason  Last-Heartbeat 
 ----  ------  -------------  ---------  ------------  -------  ------------------  ---------  ------------  -------------- 
 
Ctrlr-Id  Creation-Time          File-Size  Service       Process  Original-Location                         Exit-Code 
 --------  ---------------------  ---------  ------------  -------  ----------------------------------------  --------- 
 1         2021-10-05T21:19:55.0  204534444  eventmgr      22453    /dmecores/svc_ifc_eventmgr.bin_log.22453  134       
           00-07:00                                                 .tar.gz                                             

Consulte o link para a Core Collection https://www.cisco.com/c/en/us/support/docs/cloud-systems-management/application-policy-infrastructure-controller-apic/214520-guide-to-collect-tech-support-and-tac-re.html

3. Coletar Suporte Técnico e Fazer Upload para SR

Capture os logs do APIC TS e carregue-os no SR para obter mais soluções de problemas. https://www.cisco.com/c/en/us/support/docs/cloud-systems-management/application-policy-infrastructure-controller-apic/214520-guide-to-collect-tech-support-and-tac-re.html