Balanceamento de carga L2TP e failover

Opções de download

PDF (173.3 KB)
Ver no Adobe Reader em vários dispositivos
ePub (113.2 KB)
Ver em vários aplicativos no iPhone, iPad, Android, Sony Reader ou Windows Phone
Mobi (Kindle) (254.4 KB)
Ver no dispositivo Kindle ou no aplicativo Kindle em vários dispositivos

Atualizado:9 de setembro de 2005

ID do documento:23981

Linguagem imparcial

O conjunto de documentação deste produto faz o possível para usar uma linguagem imparcial. Para os fins deste conjunto de documentação, a imparcialidade é definida como uma linguagem que não implica em discriminação baseada em idade, deficiência, gênero, identidade racial, identidade étnica, orientação sexual, status socioeconômico e interseccionalidade. Pode haver exceções na documentação devido à linguagem codificada nas interfaces de usuário do software do produto, linguagem usada com base na documentação de RFP ou linguagem usada por um produto de terceiros referenciado. Saiba mais sobre como a Cisco está usando a linguagem inclusiva.

Sobre esta tradução

A Cisco traduziu este documento com a ajuda de tecnologias de tradução automática e humana para oferecer conteúdo de suporte aos seus usuários no seu próprio idioma, independentemente da localização. Observe que mesmo a melhor tradução automática não será tão precisa quanto as realizadas por um tradutor profissional. A Cisco Systems, Inc. não se responsabiliza pela precisão destas traduções e recomenda que o documento original em inglês (link fornecido) seja sempre consultado.

Introduction

Prerequisites

Requirements

Componentes Utilizados

Conventions

Balanceamento de carga LNS

Failover de LNS

Balanceamento de carga e failover de LNS

Teste de laboratório

Balanceamento de carga de LNS usando pares de atributos/valores específicos do fornecedor da Cisco

LAC - Configuração

LNS - Configuração

Depurações retiradas do LAC

Failover de LNS usando atributos/pares de valor específicos do fornecedor da Cisco

Balanceamento de carga e failover de LNS usando pares de atributos/valores específicos do fornecedor da Cisco

Informações Relacionadas

Introduction

Este documento explica os recursos de um concentrador de acesso L2TP (LAC) que executa funções de balanceamento de carga e failover para vários servidores de rede L2TP (LNS).

Prerequisites

Requirements

Não existem requisitos específicos para este documento.

Componentes Utilizados

Este documento não se restringe a versões de software e hardware específicas.

Conventions

Consulte as Convenções de Dicas Técnicas da Cisco para obter mais informações sobre convenções de documentos.

Balanceamento de carga LNS

Ao usar o RADIUS para fornecer informações de túnel de rede de discagem privada virtual (VPDN) para um LAC, é possível encaminhar usuários do mesmo serviço de identificação de número discado (DNIS) ou domínio para vários LNS. Esse é um requisito quando os túneis e as sessões de entrada precisam ser compartilhados entre vários LNSs para auxiliar na distribuição de carga e oferecer níveis mais altos de redundância. Para habilitar o recurso de balanceamento de carga, os endereços IP para cada LNS que está disponível como um endpoint de túnel devem ser entregues no par atributo/valor do atributo específico do fornecedor (VSA) da Cisco.

Cisco:Avpair = "vpdn:ip-addresses=10.51.6.82,10.51.6.59"

O ',' é usado como delimitador para indicar que há vários pontos finais disponíveis para o LAC (você também pode usar um espaço como delimitador para indicar a mesma prioridade de pontos finais de túnel). O LAC seleciona qual endpoint usar com base na seleção aleatória do primeiro endereço IP não ativo entregue. Se estiver ocupado (o LAC não pode se conectar ao endereço IP), o próximo endereço IP será selecionado. Se não houver endereços IP não ativos disponíveis, a próxima seleção será baseada em um endereço IP que esteja em 'estado de túnel aberto' e, finalmente, um endereço IP que esteja 'estado de túnel pendente'.

Failover de LNS

O software Cisco IOS® permite um máximo de seis níveis de prioridade ao utilizar vários LNSs. Usando '/' como delimitador, você pode atribuir diferentes grupos de prioridade ao LNS que são baixados para o LAC. Isso permite que determinados LNSs operem como o LNS principal e outros como um backup. Como antes, os endpoints de túnel são entregues no par atributo/valor do Cisco VSA.

Cisco:Avpair = "vpdn:ip-addresses=10.51.6.82/10.51.6.59"

O delimitador '/' indica que 10.51.6.82 está no Grupo de Prioridade 1 e 10.51.6.59 está no Grupo de Prioridade 2.

Balanceamento de carga e failover de LNS

É possível usar balanceamento de carga e failover no mesmo perfil. Isso é obtido usando o par de atributos/valores do Cisco VSA "vpdn:ip-addresses", como mostrado aqui:

Cisco:Avpair = "vpdn:ip-addresses=
1.1.1.1,2.2.2.2/3.3.3.3,4.4.4.4/5.5.5.5,6.6.6.6"

Isto é interpretado como:

os pontos finais de túnel 1.1.1.1 e 2.2.2.2 estão no grupo de prioridade 1
os pontos finais de túnel 3.3.3.3 e 4.4.4.4 estão no grupo de prioridade 2
os pontos finais de túnel 5.5.5.5 e 6.6.6.6 estão no Grupo de prioridade 3

A função de balanceamento de carga é executada no Grupo de prioridade 1 - não ativo/não ocupado, aberto, pendente. Se não houver nenhum disponível nesse nível de prioridade, vá para o próximo nível de prioridade e continue a lógica de seleção.

Teste de laboratório

O teste nesta seção mostra três cenários diferentes para o uso dos recursos de balanceamento de carga e failover:

Balanceamento de carga de LNS usando pares de atributo/valor específicos do fornecedor da Cisco
Failover de LNS usando pares de atributo/valor específicos do fornecedor da Cisco
Balanceamento de carga e failover de LNS usando pares de atributo/valor específicos do fornecedor da Cisco

Balanceamento de carga de LNS usando pares de atributos/valores específicos do fornecedor da Cisco

Perfil RADIUS

Perfis de túnel e usuário RADIUS no Merit RADIUS Server 3.6B:

2500-1 Password = "cisco" 
Service-Type = Framed,
Framed-Protocol = PPP,
Framed-IP-Address = 255.255.255.255

dnis:614629 Password = "cisco"
Service-Type = Outbound,
Cisco:Avpair = "vpdn:tunnel-type=l2tp",
Cisco:Avpair = "vpdn:tunnel-id=hgw",
Cisco:Avpair = "vpdn:ip-addresses=10.51.6.82,10.51.6.59",
Cisco:Avpair = "vpdn:l2tp-tunnel-password=hello"

LAC - Configuração

aaa new-model

!--- Enables Authentication, Authorization and Accounting functionality.

aaa group server radius NSA_LAB
server 10.51.6.3 auth-port 1645 acct-port 0 non-standard
!
aaa authentication login default local
aaa authentication ppp default local group NSA_LAB
aaa authentication ppp DIAL group NSA_LAB local
aaa authorization network default group NSA_LAB local
aaa authorization network DIAL group NSA_LAB local

!--- Authentication and Authorization will be implemented !--- in sequence by the methods configured.

vpdn enable

!--- Enables the VPDN feature.

no vpdn logging
vpdn search-order dnis

!--- Once LCP state is open, the dialed number is checked !--- to see if the remote is a VPDN user.

interface Serial0:15
no ip address
encapsulation ppp
no logging event link-status
dialer rotary-group 1
dialer-group 1
autodetect encapsulation ppp v120
no snmp trap link-status
isdn switch-type primary-net5
isdn incoming-voice modem
compress stac
!
interface Dialer1
ip unnumbered Loopback0
encapsulation ppp
no ip mroute-cache
dialer-group 1
autodetect encapsulation ppp v120

!--- Allows the encapsulation type to be dynamically set if the call !--- type is not identified in the ISDN Q.931 Lower Layer Compatibility.

peer default ip address pool default
compress stac
ppp authentication chap pap DIAL
ppp authorization DIAL

!--- The list-name DIAL is configured, that PPP Authentication and !--- Authorization will use.

ppp chap hostname 5300-1

!--- The name 5300-1 is used for all CHAP challenge and response on !--- this interface.

ppp multilink
!
radius-server host 10.51.6.3 auth-port 1645 acct-port 1646 non-standard

!--- 'non-standard' indicates that the RADIUS Server will use !--- non standard RADIUS attributes.

LNS - Configuração

aaa new-model

!--- Enables Authentication, Authorization and Accounting functionality.

aaa authentication login default local
aaa authentication enable default group radius enable
aaa authentication ppp default local
aaa authentication ppp vpdn group radius none
aaa authorization network default local none
aaa authorization network vpdn group radius local

!--- Authentication and Authorization will be implemented !--- in sequence by the methods configured.

vpdn enable

!--- Enables the VPDN feature.

vpdn-group 1
accept-dialin
protocol l2tp
virtual-template 1
local name l2tp-gw
l2tp tunnel password 7 1211001B1E04

!--- The LNS will accept connections from the LAC using L2TP !--- using All Virtual-Access Interfaces that are created will be cloned from !--- Virtual-Template 1. The name 'l2tp-gw' is used to identify the password, !--- that will authenticate the tunnel, is encrypted.

interface Ethernet5/0
ip address 10.51.6.59 255.255.252.0
!
interface Virtual-Template1
ip unnumbered Ethernet5/0
no ip route-cache cef
peer default ip address pool default
ppp authentication chap vpdn
ppp authorization vpdn
!
radius-server host 10.51.6.3 auth-port 1645 acct-port 1646 non-standard

!--- 'non-standard' identifies the RADIUS Server will be !--- using nonstandard RADIUS attributes.

Depurações retiradas do LAC

Jan 1 00:32:54.847: %LINK-3-UPDOWN: Interface Serial0:0, changed state to up
Jan 1 00:32:55.027: Se0:0 PPP: Treating connection as a callin
Jan 1 00:32:55.027: Se0:0 PPP: Phase is ESTABLISHING, Passive Open
Jan 1 00:32:55.027: Se0:0 CHAP: Using alternate hostname 5300-1
Jan 1 00:32:55.027: Se0:0 LCP: State is Listen
Jan 1 00:32:55.027: Se0:0 LCP: I CONFREQ [Listen] id 112 len 10
- snip -
Jan 1 00:32:55.063: Se0:0 LCP: State is Open
Jan 1 00:32:55.063: Se0:0 PPP: Phase is AUTHENTICATING, by this end
Jan 1 00:32:55.063: Se0:0 CHAP: Using alternate hostname 5300-1
Jan 1 00:32:55.063: Se0:0 CHAP: O CHALLENGE id 14 len 27 from "5300-1"
Jan 1 00:32:55.083: Se0:0 CHAP: I RESPONSE id 14 len 27 from "2500-1"
Jan 1 00:32:55.083: Se0:0 PPP: Phase is FORWARDING
Jan 1 00:32:55.083: Se0:0 VPDN: Got DNIS string 614629
Jan 1 00:32:55.083: Se0:0 VPDN: Looking for tunnel -- dnis:614629 --
Jan 1 00:32:55.083: Serial0:0 AAA/AUTHOR/VPDN (480033158): 
Port='Serial0:0' list='default' service=NET
Jan 1 00:32:55.083: AAA/AUTHOR/VPDN: Serial0:0 (480033158) user='dnis:614629'
Jan 1 00:32:55.087: Serial0:0 AAA/AUTHOR/VPDN (480033158): send AV service=ppp
Jan 1 00:32:55.087: Serial0:0 AAA/AUTHOR/VPDN (480033158): send AV protocol=vpdn
Jan 1 00:32:55.087: Serial0:0 AAA/AUTHOR/VPDN (480033158): found list "default"
Jan 1 00:32:55.087: Serial0:0 AAA/AUTHOR/VPDN (480033158): Method=NSA_LAB (radius)
Jan 1 00:32:55.087: RADIUS: Initial Transmit Serial0:0 id 50 10.51.6.3:1645, 
Access-Request, len 100
Jan 1 00:32:55.087: Attribute 4 6 0A330644
Jan 1 00:32:55.087: Attribute 5 6 00000000
Jan 1 00:32:55.087: Attribute 26 17 00000009020B5365
Jan 1 00:32:55.087: Attribute 61 6 00000002
Jan 1 00:32:55.087: Attribute 1 13 646E6973
Jan 1 00:32:55.087: Attribute 30 8 36313436
Jan 1 00:32:55.087: Attribute 2 18 F0AF3BC4
Jan 1 00:32:55.087: Attribute 6 6 00000005
Jan 1 00:32:55.091: RADIUS: Received from id 50 10.51.6.3:1645, 
Access-Accept, len 167
Jan 1 00:32:55.091: Attribute 6 6 00000005
Jan 1 00:32:55.091: Attribute 26 29 0000000901177670
Jan 1 00:32:55.091: Attribute 26 26 0000000901147670
Jan 1 00:32:55.091: Attribute 26 47 0000000901297670
Jan 1 00:32:55.091: Attribute 26 39 0000000901217670

!--- LAC receives a call, negotiates PPP, LCP is declared Open, !--- the dialed number is queried to ascertain if this is a VPDN customer. !--- VPDN attempts to find an existing tunnel for the user, queries RADIUS for !--- the tunnel information.

Jan 1 00:32:55.091: RADIUS: saved authorization data for user 61F40024 at 
61F9813C
Jan 1 00:32:55.091: RADIUS: cisco AVPair "vpdn:tunnel-type=l2tp"
Jan 1 00:32:55.091: RADIUS: cisco AVPair "vpdn:tunnel-id=hgw"
Jan 1 00:32:55.091: RADIUS: cisco AVPair "vpdn:ip-addresses=10.51.6.82,10.51.6.59"
Jan 1 00:32:55.095: RADIUS: cisco AVPair "vpdn:l2tp-tunnel-password=hello"
Jan 1 00:32:55.095: AAA/AUTHOR (480033158): Post authorization status = PASS_ADD
Jan 1 00:32:55.095: AAA/AUTHOR/VPDN: Processing AV service=ppp
Jan 1 00:32:55.095: AAA/AUTHOR/VPDN: Processing AV protocol=vpdn
Jan 1 00:32:55.095: AAA/AUTHOR/VPDN: Processing AV tunnel-type=l2tp
Jan 1 00:32:55.095: AAA/AUTHOR/VPDN: Processing AV tunnel-id=hgw
Jan 1 00:32:55.095: AAA/AUTHOR/VPDN: Processing AV ip-addresses=
10.51.6.82,10.51.6.59
Jan 1 00:32:55.095: AAA/AUTHOR/VPDN: Processing AV l2tp-tunnel-password=hello
Jan 1 00:32:55.095: Se0:0 VPDN/RPMS/: Got tunnel info for dnis:614629
Jan 1 00:32:55.095: Se0:0 VPDN/RPMS/: LAC hgw
Jan 1 00:32:55.095: Se0:0 VPDN/RPMS/: l2tp-busy-disconnect yes
Jan 1 00:32:55.095: Se0:0 VPDN/RPMS/: l2tp-tunnel-password xxxxxx
Jan 1 00:32:55.095: Se0:0 VPDN/RPMS/: 2 IP addresses
Jan 1 00:32:55.095: Se0:0 VPDN/RPMS/: IP 10.51.6.82 Priority 1
Jan 1 00:32:55.095: Se0:0 VPDN/RPMS/: IP 10.51.6.59 Priority 1
Jan 1 00:32:55.095: Se0:0 VPDN/: curlvl 1 Address 0: 10.51.6.82, priority 1 
Jan 1 00:32:55.095: Se0:0 VPDN/: Select non-active address 10.51.6.82, priority 1

!--- The tunnel information is downloaded, using Cisco VSA. Two LNS IP !--- Addresses are used with a ',' as the delimiter, indicating that both !--- have equal priority. In this case 10.51.6.82 is selected as the tunnel !--- endpoint.

Jan 1 00:32:55.095: Se0:0 VPDN: Find LNS process created
Jan 1 00:32:55.095: Tnl 49467 L2TP: SM State idle
Jan 1 00:32:55.095: Tnl 49467 L2TP: O SCCRQ 
Jan 1 00:32:55.099: Tnl 49467 L2TP: Tunnel state change from idle to 
wait-ctl-reply
Jan 1 00:32:55.099: Tnl 49467 L2TP: SM State wait-ctl-reply
Jan 1 00:32:55.099: Se0:0 VPDN: Forward to address 10.51.6.82
Jan 1 00:32:55.099: Se0:0 VPDN: Pending
Jan 1 00:32:55.099: Se0:0 VPDN: Process created
Jan 1 00:32:55.191: Tnl 49467 L2TP: I SCCRP from l2tp-gw
Jan 1 00:32:55.191: Tnl 49467 L2TP: Got a challenge from remote peer, l2tp-gw
Jan 1 00:32:55.191: Tnl 49467 L2TP: Got a response from remote peer, l2tp-gw
Jan 1 00:32:55.191: Tnl 49467 L2TP: Tunnel Authentication success
Jan 1 00:32:55.191: Tnl 49467 L2TP: Tunnel state change from 
wait-ctl-reply to established
Jan 1 00:32:55.191: Tnl 49467 L2TP: O SCCCN to l2tp-gw tnlid 62193
Jan 1 00:32:55.195: Tnl 49467 L2TP: SM State established
Jan 1 00:32:55.195: Tnl/Cl 49467/16 L2TP: Session FS enabled
Jan 1 00:32:55.195: Tnl/Cl 49467/16 L2TP: Session state change 
from idle to wait-for-tunnel
Jan 1 00:32:55.195: Se0:0 Tnl/Cl 49467/16 L2TP: Create session
Jan 1 00:32:55.195: Tnl 49467 L2TP: SM State established
Jan 1 00:32:55.195: Se0:0 Tnl/Cl 49467/16 L2TP: O ICRQ to l2tp-gw 62193/0
Jan 1 00:32:55.195: Se0:0 Tnl/Cl 49467/16 L2TP: Session state change 
from wait-for-tunnel to wait-reply
Jan 1 00:32:55.195: Se0:0 VPDN: 2500-1 is forwarded
Jan 1 00:32:55.327: Se0:0 Tnl/Cl 49467/16 L2TP: O ICCN to l2tp-gw 62193/17
Jan 1 00:32:55.327: Se0:0 Tnl/Cl 49467/16 L2TP: Session state change 
from wait-reply to established
Jan 1 00:32:56.195: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0:0, 
changed state to up
Jan 1 00:33:00.851: %ISDN-6-CONNECT:Interface Serial0:0 is now connected to 2500-1
Jan 1 00:33:06.111: %ISDN-6-CONNECT: 
Interface Serial0:1 is now connected to N/A N/A

!--- Second call is received by the LAC, !--- the dialed number is a VPDN customer.

Jan 1 00:33:35.027: As1 LCP: I CONFREQ [Closed] id 1 len 23
- snip -
Jan 1 00:33:39.275: As1 LCP: State is Open
Jan 1 00:33:39.275: As1 PPP: Phase is AUTHENTICATING, by this end
Jan 1 00:33:39.275: As1 CHAP: Using alternate hostname 5300-1
Jan 1 00:33:39.275: As1 CHAP: O CHALLENGE id 2 len 27 from "5300-1"
Jan 1 00:33:39.383: As1 CHAP: I RESPONSE id 2 len 25 from "paul"
Jan 1 00:33:39.383: As1 PPP: Phase is FORWARDING
Jan 1 00:33:39.383: As1 VPDN: Got DNIS string 614629
Jan 1 00:33:39.383: As1 VPDN: Looking for tunnel -- dnis:614629 --
Jan 1 00:33:39.387: Async1 AAA/AUTHOR/VPDN (3019717950): 
Port='Async1' list='default' service=NET
Jan 1 00:33:39.387: AAA/AUTHOR/VPDN: Async1 (3019717950) user='dnis:614629'
Jan 1 00:33:39.387: Async1 AAA/AUTHOR/VPDN (3019717950): send AV service=ppp
Jan 1 00:33:39.387: Async1 AAA/AUTHOR/VPDN (3019717950): send AV protocol=vpdn
Jan 1 00:33:39.387: Async1 AAA/AUTHOR/VPDN (3019717950): found list "default"
Jan 1 00:33:39.387: Async1 AAA/AUTHOR/VPDN (3019717950): Method=NSA_LAB (radius)
Jan 1 00:33:39.387: RADIUS: Initial Transmit Async1 id 52 10.51.6.3:1645, 
Access-Request, len 97
Jan 1 00:33:39.387: Attribute 4 6 0A330644
Jan 1 00:33:39.387: Attribute 5 6 00000001
Jan 1 00:33:39.387: Attribute 26 14 0000000902084173
Jan 1 00:33:39.387: Attribute 61 6 00000000
Jan 1 00:33:39.387: Attribute 1 13 646E6973
Jan 1 00:33:39.387: Attribute 30 8 36313436
Jan 1 00:33:39.387: Attribute 2 18 E9164E4C
Jan 1 00:33:39.387: Attribute 6 6 00000005
Jan 1 00:33:39.391: RADIUS: Received from id 52 10.51.6.3:1645, 
Access-Accept, len 167
Jan 1 00:33:39.391: Attribute 6 6 00000005
Jan 1 00:33:39.391: Attribute 26 29 0000000901177670
Jan 1 00:33:39.391: Attribute 26 26 0000000901147670
Jan 1 00:33:39.391: Attribute 26 47 0000000901297670
Jan 1 00:33:39.391: Attribute 26 39 0000000901217670
Jan 1 00:33:39.391: RADIUS: saved authorization data for user 
621904CC at 61FAB9EC
Jan 1 00:33:39.391: RADIUS: cisco AVPair "vpdn:tunnel-type=l2tp"
Jan 1 00:33:39.391: RADIUS: cisco AVPair "vpdn:tunnel-id=hgw"
Jan 1 00:33:39.391: RADIUS: cisco AVPair "vpdn:ip-addresses=10.51.6.82,10.51.6.59"
Jan 1 00:33:39.391: RADIUS: cisco AVPair "vpdn:l2tp-tunnel-password=hello"
Jan 1 00:33:39.395: AAA/AUTHOR (3019717950): Post authorization status = PASS_ADD
Jan 1 00:33:39.395: AAA/AUTHOR/VPDN: Processing AV service=ppp
Jan 1 00:33:39.395: AAA/AUTHOR/VPDN: Processing AV protocol=vpdn
Jan 1 00:33:39.395: AAA/AUTHOR/VPDN: Processing AV tunnel-type=l2tp
Jan 1 00:33:39.395: AAA/AUTHOR/VPDN: Processing AV tunnel-id=hgw
Jan 1 00:33:39.395: AAA/AUTHOR/VPDN: 
Processing AV ip-addresses=10.51.6.82,10.51.6.59
Jan 1 00:33:39.395: AAA/AUTHOR/VPDN: 
Processing AV l2tp-tunnel-password=hello
Jan 1 00:33:39.395: As1 VPDN/RPMS/: Got tunnel info for dnis:614629
Jan 1 00:33:39.395: As1 VPDN/RPMS/: LAC hgw
Jan 1 00:33:39.395: As1 VPDN/RPMS/: l2tp-busy-disconnect yes
Jan 1 00:33:39.395: As1 VPDN/RPMS/: l2tp-tunnel-password xxxxxx
Jan 1 00:33:39.395: As1 VPDN/RPMS/: 2 IP addresses
Jan 1 00:33:39.395: As1 VPDN/RPMS/: IP 10.51.6.82 Priority 1
Jan 1 00:33:39.395: As1 VPDN/RPMS/: IP 10.51.6.59 Priority 1
Jan 1 00:33:39.395: As1 VPDN/: curlvl 1 Address 1: 10.51.6.59, priority 1
Jan 1 00:33:39.395: As1 VPDN/: Select non-active address 10.51.6.59, priority 1

!--- The second non-active endpoint is selected 10.51.6.59 !--- and the control connection is established.

Jan 1 00:33:39.395: As1 VPDN: Find LNS process created
Jan 1 00:33:39.395: Tnl 20770 L2TP: SM State idle
Jan 1 00:33:39.395: Tnl 20770 L2TP: O SCCRQ 
Jan 1 00:33:39.399: Tnl 20770 L2TP: Tunnel state change from idle to 
wait-ctl-reply
Jan 1 00:33:39.399: Tnl 20770 L2TP: SM State wait-ctl-reply
Jan 1 00:33:39.399: As1 VPDN: Forward to address 10.51.6.59
Jan 1 00:33:39.399: As1 VPDN: Pending
Jan 1 00:33:39.399: As1 VPDN: Process created
Jan 1 00:33:39.399: Tnl 20770 L2TP: I SCCRP from l2tp-gw
Jan 1 00:33:39.399: Tnl 20770 L2TP: Got a challenge from remote peer, l2tp-gw
Jan 1 00:33:39.399: Tnl 20770 L2TP: Got a response from remote peer, l2tp-gw
Jan 1 00:33:39.399: Tnl 20770 L2TP: Tunnel Authentication success
Jan 1 00:33:39.399: Tnl 20770 L2TP: Tunnel state change from 
wait-ctl-reply to established
Jan 1 00:33:39.403: Tnl 20770 L2TP: O SCCCN to l2tp-gw tnlid 42921
Jan 1 00:33:39.403: Tnl 20770 L2TP: SM State established
Jan 1 00:33:39.403: As1 VPDN: Forwarding...
Jan 1 00:33:39.403: Tnl/Cl 20770/17 L2TP: Session FS enabled
Jan 1 00:33:39.403: Tnl/Cl 20770/17 L2TP: Session state change from 
idle to wait-for-tunnel
Jan 1 00:33:39.403: As1 Tnl/Cl 20770/17 L2TP: Create session
Jan 1 00:33:39.403: Tnl 20770 L2TP: SM State established
Jan 1 00:33:39.403: As1 Tnl/Cl 20770/17 L2TP: O ICRQ to l2tp-gw 42921/0
Jan 1 00:33:39.403: As1 Tnl/Cl 20770/17 L2TP: Session state change from 
wait-for-tunnel to wait-reply
Jan 1 00:33:39.403: As1 VPDN: paul is forwarded
Jan 1 00:33:39.407: As1 Tnl/Cl 20770/17 L2TP: O ICCN to l2tp-gw 42921/16
Jan 1 00:33:39.407: As1 Tnl/Cl 20770/17 L2TP: Session state change from 
wait-reply to established

Failover de LNS usando atributos/pares de valor específicos do fornecedor da Cisco

Perfil RADIUS

Perfis de túnel e usuário RADIUS no Merit RADIUS Server 3.6B:

2500-1 Password = "cisco" 
Service-Type = Framed,
Framed-Protocol = PPP,
Framed-IP-Address = 255.255.255.255

dnis:614629 Password = "cisco"
Service-Type = Outbound,
Cisco:Avpair = "vpdn:tunnel-type=l2tp",
Cisco:Avpair = "vpdn:tunnel-id=hgw",
Cisco:Avpair = "vpdn:ip-addresses=10.51.6.82/10.51.6.59",
Cisco:Avpair = "vpdn:l2tp-tunnel-password=hello"

Configuração de LAC e LNS

Igual ao anterior.

Depurações retiradas do LAC

Jan 1 02:00:35.767: As2 LCP: State is Open
Jan 1 02:00:35.767: As2 PPP: Phase is AUTHENTICATING, by this end 
[0 sess, 0 load]
Jan 1 02:00:35.767: As2 CHAP: Using alternate hostname 5300-1
Jan 1 02:00:35.767: As2 CHAP: O CHALLENGE id 1 len 27 from "5300-1"
Jan 1 02:00:35.959: As2 CHAP: I RESPONSE id 1 len 25 from "paul"
Jan 1 02:00:35.959: As2 PPP: Phase is FORWARDING [0 sess, 0 load]
Jan 1 02:00:35.959: As2 VPDN: Got DNIS string 614629
Jan 1 02:00:35.959: As2 VPDN: Looking for tunnel -- dnis:614629 --
Jan 1 02:00:35.959: AAA/AUTHOR/VPDN: Async2 (3581154520) user='dnis:614629'
Jan 1 02:00:35.963: Async2 AAA/AUTHOR/VPDN (3581154520): send AV service=ppp
Jan 1 02:00:35.963: Async2 AAA/AUTHOR/VPDN (3581154520): send AV protocol=vpdn
Jan 1 02:00:35.963: Async2 AAA/AUTHOR/VPDN (3581154520): found list "default"
Jan 1 02:00:35.963: Async2 AAA/AUTHOR/VPDN (3581154520): Method=NSA_LAB (radius)
Jan 1 02:00:35.963: RADIUS: Initial Transmit Async2 id 56 10.51.6.3:1645, 
Access-Request, len 109
Jan 1 02:00:35.963: Attribute 4 6 0A330644
Jan 1 02:00:35.963: Attribute 5 6 00000000
Jan 1 02:00:35.963: Attribute 26 14 0000000902084173
Jan 1 02:00:35.963: Attribute 61 6 00000000
Jan 1 02:00:35.963: Attribute 1 13 646E6973
Jan 1 02:00:35.963: Attribute 30 8 36313436
Jan 1 02:00:35.963: Attribute 31 12 31363139
Jan 1 02:00:35.963: Attribute 2 18 2A5AF04C
Jan 1 02:00:35.963: Attribute 6 6 00000005
Jan 1 02:00:35.967: RADIUS: Received from id 56 10.51.6.3:1645, 
Access-Accept, len 167
Jan 1 02:00:35.967: Attribute 6 6 00000005
Jan 1 02:00:35.967: Attribute 26 29 0000000901177670
Jan 1 02:00:35.967: Attribute 26 26 0000000901147670
Jan 1 02:00:35.967: Attribute 26 47 0000000901297670
Jan 1 02:00:35.967: Attribute 26 39 0000000901217670
Jan 1 02:00:35.967: RADIUS: cisco AVPair "vpdn:tunnel-type=l2tp"
Jan 1 02:00:35.967: RADIUS: cisco AVPair "vpdn:tunnel-id=hgw"
Jan 1 02:00:35.967: RADIUS: cisco AVPair "vpdn:ip-addresses=10.51.6.82/10.51.6.59"
Jan 1 02:00:35.967: RADIUS: cisco AVPair "vpdn:l2tp-tunnel-password=hello"
Jan 1 02:00:35.967: AAA/AUTHOR (3581154520): Post authorization status = PASS_ADD
Jan 1 02:00:35.967: AAA/AUTHOR/VPDN: Processing AV service=ppp
Jan 1 02:00:35.967: AAA/AUTHOR/VPDN: Processing AV protocol=vpdn
Jan 1 02:00:35.967: AAA/AUTHOR/VPDN: Processing AV tunnel-type=l2tp
Jan 1 02:00:35.967: AAA/AUTHOR/VPDN: Processing AV tunnel-id=hgw
Jan 1 02:00:35.967: AAA/AUTHOR/VPDN: Processing AV ip-addresses=
10.51.6.82/10.51.6.59
Jan 1 02:00:35.967: AAA/AUTHOR/VPDN: Processing AV l2tp-tunnel-password=hello

!--- LAC receives a call, negotiates PPP, LCP is declared Open, !--- the dialed number is queried to ascertain if this is a VPDN customer. !--- VPDN attempts to find an existing tunnel for the user, queries RADIUS for !--- the tunnel information.

Jan 1 02:00:35.967: As2 VPDN/RPMS/: Got tunnel info for dnis:614629
Jan 1 02:00:35.971: As2 VPDN/RPMS/: LAC hgw
Jan 1 02:00:35.971: As2 VPDN/RPMS/: l2tp-busy-disconnect yes
Jan 1 02:00:35.971: As2 VPDN/RPMS/: l2tp-tunnel-password xxxxxx
Jan 1 02:00:35.971: As2 VPDN/RPMS/: 2 IP addresses
Jan 1 02:00:35.971: As2 VPDN/RPMS/: IP 10.51.6.82 Priority 1
Jan 1 02:00:35.971: As2 VPDN/RPMS/: IP 10.51.6.59 Priority 2
Jan 1 02:00:35.971: As2 VPDN/: curlvl 1 Address 0: 10.51.6.82, priority 1
Jan 1 02:00:35.971: As2 VPDN/: Select non-active address 10.51.6.82, priority 1

!--- The tunnel information is downloaded, using Cisco VSA. !--- Two RADIUS server IP Address's are used with a '/' as the delimiter, !--- indicating that there are two priority groups. In this case 10.51.6.82, !--- as Priority level 1, is selected as the tunnel endpoint.

Jan 1 02:00:35.971: Tnl 17044 L2TP: SM State idle
Jan 1 02:00:35.971: Tnl 17044 L2TP: O SCCRQ 
Jan 1 02:00:35.971: Tnl 17044 L2TP: Tunnel state change from idle to 
wait-ctl-reply
Jan 1 02:00:35.971: Tnl 17044 L2TP: SM State wait-ctl-reply
Jan 1 02:00:35.971: As2 VPDN: Find LNS process created
Jan 1 02:00:35.971: As2 VPDN: Forward to address 10.51.6.82
Jan 1 02:00:35.971: As2 VPDN: Pending
Jan 1 02:00:35.971: As2 VPDN: Process created
Jan 1 02:00:35.983: Tnl 17044 L2TP: I SCCRP from l2tp-gw
Jan 1 02:00:35.983: Tnl 17044 L2TP: Got a challenge from remote peer, l2tp-gw
Jan 1 02:00:35.983: Tnl 17044 L2TP: Got a response from remote peer, l2tp-gw
Jan 1 02:00:35.983: Tnl 17044 L2TP: Tunnel Authentication success
Jan 1 02:00:35.983: Tnl 17044 L2TP: 
Tunnel state change from wait-ctl-reply to established
Jan 1 02:00:35.983: Tnl 17044 L2TP: O SCCCN to l2tp-gw tnlid 9017
Jan 1 02:00:35.983: Tnl 17044 L2TP: SM State established
Jan 1 02:00:35.983: As2 VPDN: Forwarding...
Jan 1 02:00:35.987: Tnl/Cl 17044/2 L2TP: Session FS enabled
Jan 1 02:00:35.987: Tnl/Cl 17044/2 L2TP: 
Session state change from idle to wait-for-tunnel
Jan 1 02:00:35.987: As2 Tnl/Cl 17044/2 L2TP: Create session
Jan 1 02:00:35.987: Tnl 17044 L2TP: SM State established
Jan 1 02:00:35.987: As2 Tnl/Cl 17044/2 L2TP: O ICRQ to l2tp-gw 9017/0
Jan 1 02:00:35.987: As2 Tnl/Cl 17044/2 L2TP: 
Session state change from wait-for-tunnel to wait-reply
Jan 1 02:00:35.987: As2 VPDN: paul is forwarded
Jan 1 02:00:35.995: As2 Tnl/Cl 17044/2 L2TP: O ICCN to l2tp-gw 9017/2
Jan 1 02:00:35.995: As2 Tnl/Cl 17044/2 L2TP: Session state change 
from wait-reply to established

!--- The Tunnel and Session are now established. !--- A second call is received by the LAC.

Jan 1 02:03:21.775: Se0:1 LCP: State is Open
Jan 1 02:03:21.775: Se0:1 PPP: Phase is AUTHENTICATING, by this end 
[0 sess, 0 load]
Jan 1 02:03:21.775: Se0:1 CHAP: Using alternate hostname 5300-1
Jan 1 02:03:21.775: Se0:1 CHAP: O CHALLENGE id 1 len 27 from "5300-1"
Jan 1 02:03:21.799: Se0:1 CHAP: I RESPONSE id 1 len 27 from "2500-1"
Jan 1 02:03:21.799: Se0:1 PPP: Phase is FORWARDING [0 sess, 0 load]
Jan 1 02:03:21.799: Se0:1 VPDN: Got DNIS string 614629
Jan 1 02:03:21.799: Se0:1 VPDN: Looking for tunnel -- dnis:614629 --
Jan 1 02:03:21.799: Serial0:1 AAA/AUTHOR/VPDN (2106866192): Port='Serial0:1' 
list='default' service=NET
Jan 1 02:03:21.799: AAA/AUTHOR/VPDN: Serial0:1 (2106866192) user='dnis:614629'
Jan 1 02:03:21.799: Serial0:1 AAA/AUTHOR/VPDN (2106866192): send AV service=ppp
Jan 1 02:03:21.799: Serial0:1 AAA/AUTHOR/VPDN (2106866192): send AV protocol=vpdn
Jan 1 02:03:21.799: Serial0:1 AAA/AUTHOR/VPDN (2106866192): found list "default"
Jan 1 02:03:21.799: Serial0:1 AAA/AUTHOR/VPDN (2106866192): Method=NSA_LAB (radius)
Jan 1 02:03:21.803: RADIUS: Initial Transmit Serial0:1 id 60 10.51.6.3:1645, 
Access-Request, len 112
Jan 1 02:03:21.803: Attribute 4 6 0A330644
Jan 1 02:03:21.803: Attribute 5 6 00000001
Jan 1 02:03:21.803: Attribute 26 17 00000009020B5365
Jan 1 02:03:21.803: Attribute 61 6 00000002
Jan 1 02:03:21.803: Attribute 1 13 646E6973
Jan 1 02:03:21.803: Attribute 30 8 36313436
Jan 1 02:03:21.803: Attribute 31 12 32303835
Jan 1 02:03:21.803: Attribute 2 18 1A511187
Jan 1 02:03:21.803: Attribute 6 6 00000005
Jan 1 02:03:21.803: RADIUS: Received from id 60 10.51.6.3:1645, 
Access-Accept, len 167
Jan 1 02:03:21.803: Attribute 6 6 00000005
Jan 1 02:03:21.803: Attribute 26 29 0000000901177670
Jan 1 02:03:21.803: Attribute 26 26 0000000901147670
Jan 1 02:03:21.803: Attribute 26 47 0000000901297670
Jan 1 02:03:21.803: Attribute 26 39 0000000901217670
Jan 1 02:03:21.807: RADIUS: cisco AVPair "vpdn:tunnel-type=l2tp"
Jan 1 02:03:21.807: RADIUS: cisco AVPair "vpdn:tunnel-id=hgw"
Jan 1 02:03:21.807: RADIUS: cisco AVPair "vpdn:ip-addresses=10.51.6.82/10.51.6.59"
Jan 1 02:03:21.807: RADIUS: cisco AVPair "vpdn:l2tp-tunnel-password=hello"
Jan 1 02:03:21.807: AAA/AUTHOR (2106866192): Post authorization status = PASS_ADD
Jan 1 02:03:21.807: AAA/AUTHOR/VPDN: Processing AV service=ppp
Jan 1 02:03:21.807: AAA/AUTHOR/VPDN: Processing AV protocol=vpdn
Jan 1 02:03:21.807: AAA/AUTHOR/VPDN: Processing AV tunnel-type=l2tp
Jan 1 02:03:21.807: AAA/AUTHOR/VPDN: Processing AV tunnel-id=hgw
Jan 1 02:03:21.807: AAA/AUTHOR/VPDN: Processing AV ip-addresses=
10.51.6.82/10.51.6.59
Jan 1 02:03:21.807: AAA/AUTHOR/VPDN: Processing AV l2tp-tunnel-password=hello
Jan 1 02:03:21.807: Se0:1 VPDN/RPMS/: Got tunnel info for dnis:614629
Jan 1 02:03:21.807: Se0:1 VPDN/RPMS/: LAC hgw
Jan 1 02:03:21.807: Se0:1 VPDN/RPMS/: l2tp-busy-disconnect yes
Jan 1 02:03:21.807: Se0:1 VPDN/RPMS/: l2tp-tunnel-password xxxxxx
Jan 1 02:03:21.807: Se0:1 VPDN/RPMS/: 2 IP addresses
Jan 1 02:03:21.807: Se0:1 VPDN/RPMS/: IP 10.51.6.82 Priority 1
Jan 1 02:03:21.807: Se0:1 VPDN/RPMS/: IP 10.51.6.59 Priority 2
Jan 1 02:03:21.807: Se0:1 VPDN/: curlvl 1 Address 0: 10.51.6.82, priority 1
Jan 1 02:03:21.811: Se0:1 VPDN/: Select open address 10.51.6.82, priority 1
Jan 1 02:03:21.811: Se0:1 VPDN: Forward to address 10.51.6.82

!--- The tunnel information is downloaded, LNS - 10.51.6.82 is !--- selected again as the tunnel endpoint as this is in Priority level 1.

Jan 1 02:03:21.811: Se0:1 VPDN: Forwarding...
Jan 1 02:03:21.811: Tnl/Cl 17044/3 L2TP: Session state change from 
idle to wait-for-tunnel
Jan 1 02:03:21.811: Se0:1 Tnl/Cl 17044/3 L2TP: Create session
Jan 1 02:03:21.811: Tnl 17044 L2TP: SM State established
Jan 1 02:03:21.811: Se0:1 Tnl/Cl 17044/3 L2TP: O ICRQ to l2tp-gw 9017/0
Jan 1 02:03:21.811: Se0:1 Tnl/Cl 17044/3 L2TP: Session state change 
from wait-for-tunnel to wait-reply
Jan 1 02:03:21.811: Se0:1 VPDN: 2500-1 is forwarded
Jan 1 02:03:21.819: Se0:1 Tnl/Cl 17044/3 L2TP: O ICCN to l2tp-gw 9017/3
Jan 1 02:03:21.819: Se0:1 Tnl/Cl 17044/3 L2TP: Session state change 
from wait-reply to established

Balanceamento de carga e failover de LNS usando pares de atributos/valores específicos do fornecedor da Cisco

Perfil RADIUS

Perfil de túnel e usuário RADIUS no Merit RADIUS Server 3.6B:

2500-1 Password = "cisco" 
Service-Type = Framed,
Framed-Protocol = PPP,
Framed-IP-Address = 255.255.255.255
dnis:614629 Password = "cisco"
Service-Type = Outbound,
Cisco:Avpair = "vpdn:tunnel-type=l2tp",
Cisco:Avpair = "vpdn:tunnel-id=hgw",
Cisco:Avpair = "vpdn:ip-addresses=
10.51.6.80,10.51.6.59/10.51.6.2,10.51.6.3/10.51.6.82,10.51.6.5",
Cisco:Avpair = "vpdn:l2tp-tunnel-password=hello"

Configuração de LAC e LNS

Igual ao anterior.

Depurações retiradas do LAC

Jan 1 00:43:11.539: %LINK-3-UPDOWN: Interface Serial0:0, changed state to up

Jan 1 00:43:11.755: Se0:0 LCP: State is Open
Jan 1 00:43:11.755: Se0:0 PPP: Phase is AUTHENTICATING, by this end
Jan 1 00:43:11.755: Se0:0 CHAP: Using alternate hostname 5300-1
Jan 1 00:43:11.755: Se0:0 CHAP: O CHALLENGE id 18 len 27 from "5300-1"
Jan 1 00:43:11.775: Se0:0 CHAP: I RESPONSE id 18 len 27 from "2500-1"
Jan 1 00:43:11.775: Se0:0 PPP: Phase is FORWARDING
Jan 1 00:43:11.775: Se0:0 VPDN: Got DNIS string 614629
Jan 1 00:43:11.775: Se0:0 VPDN: Looking for tunnel -- dnis:614629 --
Jan 1 00:43:11.775: Serial0:0 AAA/AUTHOR/VPDN (2215378044): Port='Serial0:0' 
list='default' service=NET
Jan 1 00:43:11.775: AAA/AUTHOR/VPDN: Serial0:0 (2215378044) user='dnis:614629'
Jan 1 00:43:11.775: Serial0:0 AAA/AUTHOR/VPDN (2215378044): send AV service=ppp
Jan 1 00:43:11.775: Serial0:0 AAA/AUTHOR/VPDN (2215378044): send AV protocol=vpdn
Jan 1 00:43:11.775: Serial0:0 AAA/AUTHOR/VPDN (2215378044): found list "default"
Jan 1 00:43:11.775: Serial0:0 AAA/AUTHOR/VPDN (2215378044): Method=NSA_LAB (radius)
Jan 1 00:43:11.779: RADIUS: Initial Transmit Serial0:0 id 57 10.51.6.3:1645, 
Access-Request, len 112
Jan 1 00:43:11.779: Attribute 4 6 0A330644
Jan 1 00:43:11.779: Attribute 5 6 00000000
Jan 1 00:43:11.779: Attribute 26 17 00000009020B5365
Jan 1 00:43:11.779: Attribute 61 6 00000002
Jan 1 00:43:11.779: Attribute 1 13 646E6973
Jan 1 00:43:11.779: Attribute 30 8 36313436
Jan 1 00:43:11.779: Attribute 31 12 32303835
Jan 1 00:43:11.779: Attribute 2 18 BA50FCD1
Jan 1 00:43:11.779: Attribute 6 6 00000005
Jan 1 00:43:11.783: RADIUS: Received from id 57 10.51.6.3:1645, 
Access-Accept, len 208
Jan 1 00:43:11.783: Attribute 6 6 00000005
Jan 1 00:43:11.783: Attribute 26 29 0000000901177670
Jan 1 00:43:11.783: Attribute 26 26 0000000901147670
Jan 1 00:43:11.783: Attribute 26 88 0000000901527670
Jan 1 00:43:11.783: Attribute 26 39 0000000901217670
Jan 1 00:43:11.783: RADIUS: cisco AVPair "vpdn:tunnel-type=l2tp"
Jan 1 00:43:11.783: RADIUS: cisco AVPair "vpdn:tunnel-id=hgw"
Jan 1 00:43:11.783: RADIUS: cisco AVPair "vpdn:ip-addresses=
10.51.6.80,10.51.6.59/10.51.6.2,10.51.6.3/10.51.6.82,10.51.6.5"
Jan 1 00:43:11.783: RADIUS: cisco AVPair "vpdn:l2tp-tunnel-password=hello"
Jan 1 00:43:11.783: AAA/AUTHOR (2215378044): Post authorization status = PASS_ADD
Jan 1 00:43:11.783: AAA/AUTHOR/VPDN: Processing AV service=ppp
Jan 1 00:43:11.783: AAA/AUTHOR/VPDN: Processing AV protocol=vpdn
Jan 1 00:43:11.783: AAA/AUTHOR/VPDN: Processing AV tunnel-type=l2tp
Jan 1 00:43:11.783: AAA/AUTHOR/VPDN: Processing AV tunnel-id=hgw
Jan 1 00:43:11.783: AAA/AUTHOR/VPDN: Processing AV ip-addresses=
10.51.6.80,10.51.6.59/10.51.6.2,10.51.6.3/10.51.6.82,10.51.6.5
Jan 1 00:43:11.783: AAA/AUTHOR/VPDN: 
Processing AV l2tp-tunnel-password=hello
Jan 1 00:43:11.783: Se0:0 VPDN/RPMS/: Got tunnel info for dnis:614629
Jan 1 00:43:11.783: Se0:0 VPDN/RPMS/: LAC hgw
Jan 1 00:43:11.787: Se0:0 VPDN/RPMS/: l2tp-busy-disconnect yes
Jan 1 00:43:11.787: Se0:0 VPDN/RPMS/: l2tp-tunnel-password xxxxxx
Jan 1 00:43:11.787: Se0:0 VPDN/RPMS/: 6 IP addresses
Jan 1 00:43:11.787: Se0:0 VPDN/RPMS/: IP 10.51.6.80 Priority 1
Jan 1 00:43:11.787: Se0:0 VPDN/RPMS/: IP 10.51.6.59 Priority 1
Jan 1 00:43:11.787: Se0:0 VPDN/RPMS/: IP 10.51.6.2 Priority 2
Jan 1 00:43:11.787: Se0:0 VPDN/RPMS/: IP 10.51.6.3 Priority 2
Jan 1 00:43:11.787: Se0:0 VPDN/RPMS/: IP 10.51.6.82 Priority 3
Jan 1 00:43:11.787: Se0:0 VPDN/RPMS/: IP 10.51.6.5 Priority 3

!--- The tunnel information is downloaded, using Cisco VSA. Two RADIUS !--- server IP Addresses are used with a '/' as the delimiter for each !--- of the three priority groups. In this case, 10.51.6.82 in Priority !--- Group 3, is the tunnel endpoint that is valid.

Jan 1 00:43:11.787: Se0:0 VPDN/: curlvl 1 Address 1: 10.51.6.59, priority 1 
Jan 1 00:43:11.787: VPDN: Free busy address 10.51.6.59
Jan 1 00:43:11.787: Se0:0 VPDN/: Select non-active address 10.51.6.59, priority 1
Jan 1 00:43:11.787: Se0:0 VPDN: Find LNS process created
Jan 1 00:43:11.787: Tnl 8262 L2TP: SM State idle
Jan 1 00:43:11.787: Tnl 8262 L2TP: O SCCRQ 
Jan 1 00:43:11.787: Tnl 8262 L2TP: Tunnel state change from idle to wait-ctl-reply
Jan 1 00:43:11.787: Tnl 8262 L2TP: SM State wait-ctl-reply
Jan 1 00:43:11.787: Se0:0 VPDN: Forward to address 10.51.6.59
Jan 1 00:43:11.791: Se0:0 VPDN: Pending
Jan 1 00:43:11.791: Se0:0 VPDN: Process created
Jan 1 00:43:12.787: Tnl 8262 L2TP: O Resend SCCRQ, flg TLS, ver 2, len 128, 
tnl 0, cl 0, ns 0, nr 0
Jan 1 00:43:12.787: Tnl 8262 L2TP: Control channel retransmit delay set to 
1 seconds
Jan 1 00:43:13.787: Tnl 8262 L2TP: O Resend SCCRQ, flg TLS, ver 2, len 128, 
tnl 0, cl 0, ns 0, nr 0
Jan 1 00:43:13.787: Tnl 8262 L2TP: Control channel retransmit delay set to 
2 seconds
Jan 1 00:43:15.787: Tnl 8262 L2TP: Timeout opening tunnel to 10.51.6.59
Jan 1 00:43:15.787: Tnl 63291 L2TP: Control channel retransmit delay set to 
4 seconds
Jan 1 00:43:15.787: Se0:0 VPDN/: curlvl 1 Address 1: 10.51.6.59, priority 1 busy

!--- 10.51.6.59 is selected as the first non-active IP Address in Priority !--- Group 1. As we cannot establish the Control Connection after the !--- 4 second SCCRQ timeout, we select the next non-active IP !--- Address in the same Priority Group.

Jan 1 00:43:15.787: Se0:0 VPDN/: curlvl 1 Address 0: 10.51.6.80, priority 1 
Jan 1 00:43:15.787: VPDN: Free busy address 10.51.6.80
Jan 1 00:43:15.787: Se0:0 VPDN/: Select non-active address 10.51.6.80, priority 1
Jan 1 00:43:15.787: Tnl 63291 L2TP: Tunnel state change from wait-ctl-reply 
to idle
Jan 1 00:43:15.787: Tnl 63291 L2TP: SM State idle
Jan 1 00:43:15.787: Tnl 63291 L2TP: O SCCRQ 
Jan 1 00:43:15.787: Tnl 63291 L2TP: Tunnel state change from idle to 
wait-ctl-reply
Jan 1 00:43:15.787: Tnl 63291 L2TP: SM State wait-ctl-reply
Jan 1 00:43:16.787: Tnl 63291 L2TP: O Resend SCCRQ, flg TLS, ver 2, 
len 128, tnl 0, cl 0, ns 0, nr 0
Jan 1 00:43:16.787: Tnl 63291 L2TP: Control channel retransmit delay 
set to 1 seconds
Jan 1 00:43:17.543: %ISDN-6-CONNECT: Interface Serial0:0 is now connected 
to 2085730592 
Jan 1 00:43:17.787: Tnl 63291 L2TP: O Resend SCCRQ, flg TLS, ver 2, len 128, 
tnl 0, cl 0, ns 0, nr 0
Jan 1 00:43:17.787: Tnl 63291 L2TP: Control channel retransmit delay set 
to 2 seconds
Jan 1 00:43:19.787: Tnl 63291 L2TP: Timeout opening tunnel to 10.51.6.80
Jan 1 00:43:19.787: Tnl 52784 L2TP: Control channel retransmit delay set 
to 4 seconds
Jan 1 00:43:19.787: Se0:0 VPDN/: curlvl 1 Address 0: 10.51.6.80, priority 1 busy
Jan 1 00:43:19.787: Se0:0 VPDN/: curlvl 1 Address 1: 10.51.6.59, priority 1 busy
Jan 1 00:43:19.787: Se0:0 VPDN/: curlvl 2 Address 2: 10.51.6.2, priority 2
Jan 1 00:43:19.787: VPDN: Free busy address 10.51.6.2
Jan 1 00:43:19.787: Se0:0 VPDN/: Select non-active address 10.51.6.2, priority 2
Jan 1 00:43:19.787: Tnl 52784 L2TP: Tunnel state change from 
wait-ctl-reply to idle
Jan 1 00:43:19.787: Tnl 52784 L2TP: SM State idle
Jan 1 00:43:19.787: Tnl 52784 L2TP: O SCCRQ 
Jan 1 00:43:19.787: Tnl 52784 L2TP: Tunnel state change from idle to 
wait-ctl-reply
Jan 1 00:43:19.787: Tnl 52784 L2TP: SM State wait-ctl-reply
Jan 1 00:43:20.787: Tnl 52784 L2TP: O Resend SCCRQ, flg TLS, ver 2, 
len 128, tnl 0, cl 0, ns 0, nr 0
Jan 1 00:43:20.787: Tnl 52784 L2TP: Control channel retransmit 
delay set to 1 seconds
Jan 1 00:43:21.671: Se0:0 CHAP: I RESPONSE id 18 len 27 from "2500-1"
Jan 1 00:43:21.671: Se0:0 VPDN: LCP state already FORWARDING/FORWARDED, 
silent discard
Jan 1 00:43:21.787: Tnl 52784 L2TP: O Resend SCCRQ, flg TLS, ver 2, len 128, 
tnl 0, cl 0, ns 0, nr 0
Jan 1 00:43:21.787: Tnl 52784 L2TP: Control channel retransmit 
delay set to 2 seconds
Jan 1 00:43:23.787: Tnl 52784 L2TP: Timeout opening tunnel to 10.51.6.2
Jan 1 00:43:23.787: Tnl 42277 L2TP: Control channel retransmit 
delay set to 4 seconds
Jan 1 00:43:23.787: Se0:0 VPDN/: curlvl 2 Address 2: 10.51.6.2, priority 2 busy
Jan 1 00:43:23.787: Se0:0 VPDN/: curlvl 2 Address 3: 10.51.6.3, priority 2
Jan 1 00:43:23.787: VPDN: Free busy address 10.51.6.3
Jan 1 00:43:23.787: Se0:0 VPDN/: Select non-active address 10.51.6.3, priority 2
Jan 1 00:43:23.787: Tnl 42277 L2TP: Tunnel state change from 
wait-ctl-reply to idle
Jan 1 00:43:23.787: Tnl 42277 L2TP: SM State idle
Jan 1 00:43:23.787: Tnl 42277 L2TP: O SCCRQ 
Jan 1 00:43:23.787: Tnl 42277 L2TP: Tunnel state change from 
idle to wait-ctl-reply
Jan 1 00:43:23.787: Tnl 42277 L2TP: SM State wait-ctl-reply
Jan 1 00:43:24.787: Tnl 42277 L2TP: O Resend SCCRQ, flg TLS, ver 2, 
len 128, tnl 0, cl 0, ns 0, nr 0
Jan 1 00:43:24.787: Tnl 42277 L2TP: Control channel retransmit delay 
set to 1 seconds
Jan 1 00:43:25.787: Tnl 42277 L2TP: O Resend SCCRQ, flg TLS, ver 2, 
len 128, tnl 0, cl 0, ns 0, nr 0
Jan 1 00:43:25.787: Tnl 42277 L2TP: Control channel retransmit 
delay set to 2 seconds
Jan 1 00:43:27.787: Tnl 42277 L2TP: Timeout opening tunnel to 10.51.6.3
Jan 1 00:43:27.787: Tnl 31770 L2TP: Control channel retransmit 
delay set to 4 seconds
Jan 1 00:43:27.787: Se0:0 VPDN/: curlvl 2 Address 3: 10.51.6.3, priority 2 busy
Jan 1 00:43:27.787: Se0:0 VPDN/: curlvl 2 Address 2: 10.51.6.2, priority 2 busy
Jan 1 00:43:27.787: Se0:0 VPDN/: curlvl 3 Address 4: 10.51.6.82, priority 3 
Jan 1 00:43:27.787: Se0:0 VPDN/: Select non-active address 10.51.6.82, priority 3

!--- Eventually arrive at the IP Address 10.51.6.82 in Priority Group 3. !--- As this is valid, the Control Connection and session are established.

Jan 1 00:43:27.787: Tnl 31770 L2TP: Tunnel state change from 
wait-ctl-reply to idle
Jan 1 00:43:27.787: Tnl 31770 L2TP: SM State idle
Jan 1 00:43:27.787: Tnl 31770 L2TP: O SCCRQ 
Jan 1 00:43:27.787: Tnl 31770 L2TP: Tunnel state change from 
idle to wait-ctl-reply
Jan 1 00:43:27.787: Tnl 31770 L2TP: SM State wait-ctl-reply
Jan 1 00:43:27.799: Tnl 31770 L2TP: I SCCRP from l2tp-gw
Jan 1 00:43:27.799: Tnl 31770 L2TP: Got a challenge from remote peer, l2tp-gw
Jan 1 00:43:27.799: Tnl 31770 L2TP: Got a response from remote peer, l2tp-gw
Jan 1 00:43:27.799: Tnl 31770 L2TP: Tunnel Authentication success
Jan 1 00:43:27.799: Tnl 31770 L2TP: Tunnel state change from 
wait-ctl-reply to established
Jan 1 00:43:27.799: Tnl 31770 L2TP: O SCCCN to l2tp-gw tnlid 3843
Jan 1 00:43:27.799: Tnl 31770 L2TP: SM State established
Jan 1 00:43:27.799: Se0:0 VPDN: Forwarding...
Jan 1 00:43:27.799: Tnl/Cl 31770/7 L2TP: Session FS enabled
Jan 1 00:43:27.799: Tnl/Cl 31770/7 L2TP: Session state change from 
idle to wait-for-tunnel
Jan 1 00:43:27.803: Se0:0 Tnl/Cl 31770/7 L2TP: Create session
Jan 1 00:43:27.803: Tnl 31770 L2TP: SM State established
Jan 1 00:43:27.803: Se0:0 Tnl/Cl 31770/7 L2TP: O ICRQ to l2tp-gw 3843/0
Jan 1 00:43:27.803: Se0:0 Tnl/Cl 31770/7 L2TP: Session state change from 
wait-for-tunnel to wait-reply
Jan 1 00:43:27.803: Se0:0 VPDN: 2500-1 is forwarded
Jan 1 00:43:27.811: Se0:0 Tnl/Cl 31770/7 L2TP: O ICCN to l2tp-gw 3843/9
Jan 1 00:43:27.811: Se0:0 Tnl/Cl 31770/7 L2TP: Session state change from 
wait-reply to established
Jan 1 00:43:28.803: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0:0, 
changed state to up

Informações Relacionadas

Balanceamento de carga L2TP e failover

Opções de download

Linguagem imparcial

Sobre esta tradução

Contents

Este documento lhe foi útil?

Contate a Cisco

Este documento se refere a estes produtos