Este documento aborda os objetos MIB equivalentes que fornecem as informações contidas em vários comandos de verificação de Voz sobre IP (VoIP). Os aplicativos e/ou scripts NMS podem potencialmente usar essas informações.
Não existem requisitos específicos para este documento.
Este documento não está restrito a versões de software específicas. No entanto, ele foi criado especificamente para um Cisco 3600 Series Router com uma placa NM-2V.
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.
For more information on document conventions, refer to the Cisco Technical Tips Conventions.
Esta saída mostra uma parte relevante da configuração que este documento usa:
VoipRouter#show running-configuration Building configuration... Current configuration : 5412 bytes ! version 12.3 ... ! snmp-server community public RO ! ... ! voice-port 2/0/0 ! ... ! dial-peer voice 2000 pots destination-pattern 2000 port 2/0/0 ! dial-peer voice 1000 voip destination-pattern 1000 session target ipv4:172.16.99.22 ! ... end
Estas seções mostram os objetos MIB que correspondem à saída destes comandos de verificação de VoIP:
show voice port summary (somente para placa NM-2V)
show call ative voice brief (somente para a plataforma Cisco 3600)
show voice dsp (somente para placa NM-HDV)
As informações que esses comandos de verificação de VoIP contêm podem ser extraídas de IF-MIB, CISCO-VOICE-IF-MIB, CISCO-VOICE-ANALOG-IF-MIB, CISCO-VOICE-DIAL-CONTROL-MIB, DIAL-CONTROL-MIB e CISCO-DSP-MGMT MIB.
Observação: nesses exemplos, o trecho de Telefonia é indexado por 1102799 e o trecho H.323 é indexado por 1102966.
Observação: o texto em negrito no comando show voice port summary é descrito na seção Objetos MIB equivalentes.
VoipRouter#show voice port summary IN OUT PORT CH SIG-TYPE ADMIN OPER STATUS STATUS EC ========= == ============ ===== ==== ======== ======== == 2/0/0(A1) -- fxs-ls(A2) up(A3)up(A4) off-hook(A5) idle y(A6) 2/0/1 -- fxs-ls up dorm on-hook idle y
A1 — IF-MIB::ifDescr.37 = STRING: Foreign Exchange Station 2/0/0 A2 — CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSCfgSignalType.37 = INTEGER: fxsLoopStart(1) A3 — IF-MIB::ifAdminStatus.37 = INTEGER: up(1) A4 — IF-MIB::ifOperStatus.37 = INTEGER: up(1) A5 — CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSHookStatus.37 = INTEGER: offHook(2) A6 — CISCO-VOICE-IF-MIB::cvIfCfgEchoCancelEnable.37 = INTEGER: true(1)
Observação: Nenhum objeto MIB mantém o valor contido na parte CH do comando show voice port summary quando a placa NM-2V é usada.
Observação: o texto em negrito no comando show voice call summary é descrito na seção Objetos MIB equivalentes.
VoipRouter#show voice call summary PORT CODEC VAD VTSP STATE VPM STATE ============ ======== === ==================== ====================== 2/0/0(B1) g729r8(B2) y(B3) S_CONNECT FXSLS_CONNECT 2/0/1 - - - FXSLS_ONHOOK
B1 — IF-MIB::ifDescr.37 = STRING: Foreign Exchange Station 2/0/0 B2 — CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveCoderTypeRate. 1102966.1 = INTEGER: ietfg729r8000(25) B3 — CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveVADEnable. 1102966.1 = INTEGER: true(1)
Observação: nenhum objeto MIB mantém os estados do Voice Telephony Service Provider (VTSP) e do VPM individualmente. Use callAtiveCallState de DIAL-CONTROL-MIB em vez disso.
Observação: o texto em negrito no comando show dial-peer voice summary é descrito na seção Objetos MIB equivalentes.
VoipRouter#show dial-peer voice summary dial-peer hunt 0 AD PRE PASS TAG TYPE MIN OPER PREFIX DEST-PATTERN FER THRU SESS-TARGET PORT 2000(C1) pots(C2) up(C3) up(C4) 9(C5) 2000(C6) 0(C7) 2/0/0(C8) 1000 voip up up 1000 0 syst ipv4:172.16.99.22(C9)
C1 — CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgIfIndex.2000 = INTEGER: 90 — DIAL-CONTROL-MIB::dialCtlPeerCfgLowerIf.2000.90 = INTEGER: 37 C2 — CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgType.2000 = INTEGER: voice(1) C3 — IF-MIB::ifAdminStatus.37 = INTEGER: up(1) C4 — IF-MIB::ifOperStatus.37 = INTEGER: up(1) C5 — CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgDialDigitsPrefix.90 = STRING: 9 C6 — DIAL-CONTROL-MIB::dialCtlPeerCfgOriginateAddress.2000.90 = STRING: 2000 C7 — CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgPreference.90 = INTEGER: 0 C8 — IF-MIB::ifDescr.37 = STRING: Foreign Exchange Station 2/0/0 C9 — CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgSessionTarget.91 = STRING: ipv4:172.16.99.22
Observação: Nenhum objeto MIB mantém o valor contido na parte do método PASS THRU do modem do comando show dial-peer summary.
Observação: o texto em negrito no comando show call ative voice brief é descrito na seção Objetos MIB equivalentes.
VoIPRouter#show call active voice brief <ID>:<start>hs.<index> +<connect> pid:<peer_id> <dir> <addr> <state> dur hh:mm:ss tx:<packets>/<bytes> rx:<packets>/<bytes> IP <ip>:<udp> rtt:<time>ms pl:<play>/<gap>ms lost:<lost>/<early>/<late> delay:<last>/<min>/<max>ms <codec> MODEMPASS <method> buf:<fills>/<drains> loss <overall%> <multipkt>/<corrected> last <buf event time>s dur:<Min>/<Max>s FR <protocol> [int dlci cid] vad:<y/n> dtmf:<y/n> seq:<y/n> sig:<on/off> <codec> (payload size) ATM <protocol> [int vpi/vci cid] vad:<y/n> dtmf:<y/n> seq:<y/n> sig:<on/off> <codec> (payload size) Tele <int>:tx:<tot>/<v>/<fax>ms <codec> noise:<l> acom:<l> i/o:<l>/<l> dBm MODEMRELAY info:<rcvd>/<sent>/<resent> xid:<rcvd>/<sent> total:<rcvd>/<sent>/<drops> Proxy <ip>:<audio udp>,<video udp>,<tcp0>,<tcp1>,<tcp2>,<tcp3> endpt: <type>/<manf> bw:<req>/<act> codec:<audio>/<video> tx:<audio pkts>/<audio bytes>,<video pkts>/<video bytes>,<t120 pkts>/<t120 bytes> rx:<audio pkts>/<audio bytes>,<video pkts>/<video bytes>,<t120 pkts>/<t120 bytes> Telephony call-legs: 1 SIP call-legs: 0 H323 call-legs: 1 MGCP call-legs: 0 Total call-legs: 2 11D9 : 1102799(D1)hs.1 +1324 pid:2000(D2) Answer(D3) 2000(D4) active(D5) dur 1d19h(D6) tx:7875641(D7)/157512782(D8) rx:7875955(D9)/157519081(D10) Tele 2/0/0(D11):1: tx:157515460(D12)/157514630(D13)/0ms g729r8(D14) noise:-56(D15) acom:5(D16) i/0:-40(D17)/-46(D18) dBm 11D9 : 1102966hs.1 +1157 pid:1000 Originate 1000 active dur 1d19h tx:7875388/157507741 rx:7875641/157512782 IP 172.16.99.22(D19):19066(D20) rtt:6ms(D21) pl:157496940(D22)/4770ms(D23) lost:52(D24)/1(D25)/325(D26) delay:67(D27)/55(D28)/132ms(D29) g729r8 Telephony call-legs: 1 SIP call-legs: 0 H323 call-legs: 1 MGCP call-legs: 0 Total call-legs: 2
D1 — CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveConnectionId.1102799.1 = Hex-STRING: 53 98 B1 3F EB B7 11 D7 80 02 AA AD C2 77 19 FC D2 — DIAL-CONTROL-MIB::callActivePeerId.1102799.1 = INTEGER: 2000 D3 — DIAL-CONTROL-MIB::callActiveCallOrigin.1102799.1 = INTEGER: answer(2) D4 — DIAL-CONTROL-MIB::callActivePeerAddress.1102799.1 = STRING: 2000 D5 — DIAL-CONTROL-MIB::callActiveCallState.1102799.1 = INTEGER: active(4) D6 — DIAL-CONTROL-MIB::callActiveConnectTime.1102799.1 = Timeticks: (1104123) 3:04:01.23 — DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (16590203) 1 days, 22:05:02.03 D7 — DIAL-CONTROL-MIB::callActiveTransmitPackets.1102799.1 = Gauge32: 7875641 D8 — DIAL-CONTROL-MIB::callActiveTransmitBytes.1102799.1 = Gauge32: 157512782 D9 — DIAL-CONTROL-MIB::callActiveReceivePackets.1102799.1 = Gauge32: 7875955 D10 — DIAL-CONTROL-MIB::callActiveReceiveBytes.1102799.1 = Gauge32: 157519081 D11 — IF-MIB::ifDescr.37 = STRING: Foreign Exchange Station 2/0/0 D12 — CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveTxDuration. 1102799.1 = Gauge32: 157515460 milliseconds D13 — CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveVoiceTxDuration. 1102799.1 = Gauge32: 157514630 milliseconds D14 — CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveCoderTypeRate. 1102799.1 = INTEGER: ietfg729r8000(25) D15 — CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveNoiseLevel. 1102799.1 = INTEGER: -56 dBm D16 — CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveACOMLevel. 1102799.1 = INTEGER: 5 dB D17 — CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveInSignalLevel. 1102799.1 = INTEGER: -40 dBm D18 — CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveOutSignalLevel. 1102799.1 = INTEGER: -46 dBm D19 — CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRemoteIPAddress. 1102966.1 = IpAddress: 172.16.99.22 D20 — CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRemoteUDPPort. 1102966.1 = INTEGER: 19066 D21 — CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRoundTripDelay. 1102966.1 = Gauge32: 6 milliseconds D22 — CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveOnTimeRvPlayout. 1102966.1 = Gauge32: 157496940 milliseconds D23 — CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveGapFillWithSilence. 1102966.1 = Gauge32: 1090 milliseconds — CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveGapFillWithPrediction. 1102966.1 = Gauge32: 3680 milliseconds — CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveGapFillWithInterpolation. 1102966.1 = Gauge32: 0 milliseconds D24 — CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveLostPackets. 1102966.1 = Gauge32: 52 packets D25 — CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEarlyPackets. 1102966.1 = Gauge32: 1 packets D26 — CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveLatePackets. 1102966.1 = Gauge32: 325 packets D27 — CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveReceiveDelay. 1102966.1 = Gauge32: 67 D28 — CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveLoWaterPlayoutDelay. 1102966.1 = Gauge32: 55 milliseconds D29 — CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveHiWaterPlayoutDelay. 1102966.1 = Gauge32: 132 milliseconds
Observação: o valor de GapFill do comando show call ative voice brief é obtido quando você adiciona os Objetos SNMP cvVoIPCallAtiveGapFillWithSilence, cvVoIPCallAtiveGapFillWithPredication e cvVoIPCallAtiveGapFap InterpolaçãoInoperante.
VoIPRouter#show voice dsp DSP DSP DSPWARE CURR BOOT PAK TX/RX TYPE NUM CH CODEC VERSION STATE STATE RST AI VOICEPORT TS ABORT PACK COUNT ==== === == ======== ======= ===== ======= === == ========= == ===== ============ C549 009 01 {medium} 4.1.31 IDLE idle 0 0 1/0:0 05 0 0/36 02 {medium} 4.1.31 IDLE idle 0 1/0:0 06 0 0/0 03 {medium} 4.1.31 IDLE idle 0 1/0:0 07 0 0/0 04 {medium} 4.1.31 IDLE idle 0 1/0:0 08 0 0/0 C549 010 01 {medium} 4.1.31 IDLE idle 0 0 1/0:0 09 0 0/0 02 {medium} 4.1.31 IDLE idle 0 1/0:0 10 0 0/0 03 {medium} 4.1.31 IDLE idle 0 1/0:0 11 0 0/0 04 {medium} 4.1.31 IDLE idle 0 1/0:0 12 0 0/0 C549 011 01 {medium} 4.1.31 IDLE idle 0 0 1/0:0 13 0 0/0 02 {medium} 4.1.31 IDLE idle 0 1/0:0 14 0 0/0 03 {medium} 4.1.31 IDLE idle 0 1/0:0 15 0 0/0 04 {medium} 4.1.31 IDLE idle 0 1/0:0 16 0 0/0 C549 012 01 {medium} 4.1.31 IDLE idle 0 0 1/0:0 17 0 0/0 02 {medium} 4.1.31 IDLE idle 0 1/0:0 18 0 0/0 03 {medium} 4.1.31 IDLE idle 0 1/0:0 19 0 0/0 04 {medium} 4.1.31 IDLE idle 0 1/0:0 20 0 0/0 C549 013 01 {medium} 4.1.31 IDLE idle 0 0 1/0:0 21 0 0/0 02 {medium} 4.1.31 IDLE idle 0 1/0:0 22 0 0/0 03 {medium} 4.1.31 IDLE idle 0 1/0:0 23 0 0/12 04 g729r8 4.1.31 busy idle 0 1/0:0 24 0 176/56702 C549 014 01 {medium} 4.1.31 IDLE idle 0 0 1/0:0 01 0 0/27 02 {medium} 4.1.31 IDLE idle 0 1/0:0 02 0 0/12 03 {medium} 4.1.31 IDLE idle 0 1/0:0 03 0 0/12 04 {medium} 4.1.31 IDLE idle 0 1/0:0 04 0 0/12
Aqui estão alguns objetos MIB úteis que fornecem informações sobre a chamada ativa na saída do exemplo do comando show voice dsp:
CISCO-DSP-MGMT-MIB::cdspCardIndex.7 = INTEGER: 2 OLD-CISCO-CHASSIS-MIB::cardType.2 = INTEGER: hdv(516) OLD-CISCO-CHASSIS-MIB::cardDescr.2 = STRING: "High Density Voice" ENTITY-MIB::entPhysicalDescr.7 = STRING: High Density Voice ENTITY-MIB::entPhysicalDescr.22 = STRING: DSP (C549) CISCO-DSP-MGMT-MIB::cdspCardState.7 = INTEGER: normal(1) CISCO-DSP-MGMT-MIB::cdspCardMaxChanPerDSP.7 = Gauge32: 4 channels CISCO-DSP-MGMT-MIB::cdspTotalChannels.22 = Gauge32: 4 channels CISCO-DSP-MGMT-MIB::cdspActiveChannels.21 = Gauge32: 1 channels
Observação: o MIB que contém as informações para show voice dsp é CISCO-DSP-MGMT-MIB. No entanto, devido ao bug da Cisco ID CSCeb62542 para a placa NM-2V, os DSPs em NM-2V não são mostrados em ENTITY-MIB. Como cdspCardStatusTable depende de entPhysicalIndex de ENTITY-MIB, cdspCardStatusTable não é preenchido para a placa NM-2V.
Esta saída mostra o snmpwalk completo de ciscoVoiceAnalogIfMIB de CISCO-VOICE-ANALOG-IF-MIB no momento dos comandos de verificação de VoIP mostrados neste documento:
snmpwalk -c public 172.16.100.20 CISCO-VOICE-ANALOG-IF-MIB:ciscoVoiceAnalogIfMIB CISCO-VOICE-ANALOG-IF-MIB::cvaIfCfgImpedance.37 = INTEGER: ohms600Real(2) CISCO-VOICE-ANALOG-IF-MIB::cvaIfCfgImpedance.38 = INTEGER: ohms600Real(2) CISCO-VOICE-ANALOG-IF-MIB::cvaIfCfgIntegratedDSP.37 = INTEGER: false(2) CISCO-VOICE-ANALOG-IF-MIB::cvaIfCfgIntegratedDSP.38 = INTEGER: false(2) CISCO-VOICE-ANALOG-IF-MIB::cvaIfStatusInfoType.37 = INTEGER: voice(2) CISCO-VOICE-ANALOG-IF-MIB::cvaIfStatusInfoType.38 = INTEGER: none(1) CISCO-VOICE-ANALOG-IF-MIB::cvaIfMaintenanceMode.37 = INTEGER: none(1) CISCO-VOICE-ANALOG-IF-MIB::cvaIfMaintenanceMode.38 = INTEGER: none(1) CISCO-VOICE-ANALOG-IF-MIB::cvaIfStatusSignalErrors.37 = Counter32: 0 CISCO-VOICE-ANALOG-IF-MIB::cvaIfStatusSignalErrors.38 = Counter32: 0 CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSCfgSignalType.37 = INTEGER: fxsLoopStart(1) CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSCfgSignalType.38 = INTEGER: fxsLoopStart(1) CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSRingFrequency.37 = INTEGER: ringFrequency25(1) CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSRingFrequency.38 = INTEGER: ringFrequency25(1) CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSHookStatus.37 = INTEGER: offHook(2) CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSHookStatus.38 = INTEGER: onHook(1) CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSRingActive.37 = INTEGER: false(2) CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSRingActive.38 = INTEGER: false(2) CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSRingGround.37 = INTEGER: false(2) CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSRingGround.38 = INTEGER: false(2) CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSTipGround.37 = INTEGER: false(2) CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSTipGround.38 = INTEGER: false(2) CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSTimingDigitDuration.37 = INTEGER: 100 milliseconds CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSTimingDigitDuration.38 = INTEGER: 100 milliseconds CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSTimingInterDigitDuration.37 = INTEGER: 100 milliseconds CISCO-VOICE-ANALOG-IF-MIB::cvaIfFXSTimingInterDigitDuration.38 = INTEGER: 100 milliseconds
Esta saída mostra o snmpwalk completo de ciscoVoiceInterfaceMIB de CISCO-VOICE-IF-MIB no momento dos comandos de verificação de VoIP mostrados neste documento:
snmpwalk -c public 172.16.100.20 CISCO-VOICE-IF-MIB:ciscoVoiceInterfaceMIB CISCO-VOICE-IF-MIB::cvIfCfgNoiseRegEnable.37 = INTEGER: true(1) CISCO-VOICE-IF-MIB::cvIfCfgNoiseRegEnable.38 = INTEGER: true(1) CISCO-VOICE-IF-MIB::cvIfCfgNonLinearProcEnable.37 = INTEGER: true(1) CISCO-VOICE-IF-MIB::cvIfCfgNonLinearProcEnable.38 = INTEGER: true(1) CISCO-VOICE-IF-MIB::cvIfCfgMusicOnHoldThreshold.37 = INTEGER: -38 dBm CISCO-VOICE-IF-MIB::cvIfCfgMusicOnHoldThreshold.38 = INTEGER: -38 dBm CISCO-VOICE-IF-MIB::cvIfCfgInGain.37 = INTEGER: 0 dB CISCO-VOICE-IF-MIB::cvIfCfgInGain.38 = INTEGER: 0 dB CISCO-VOICE-IF-MIB::cvIfCfgOutAttn.37 = INTEGER: 3 dB CISCO-VOICE-IF-MIB::cvIfCfgOutAttn.38 = INTEGER: 3 dB CISCO-VOICE-IF-MIB::cvIfCfgEchoCancelEnable.37 = INTEGER: true(1) CISCO-VOICE-IF-MIB::cvIfCfgEchoCancelEnable.38 = INTEGER: true(1) CISCO-VOICE-IF-MIB::cvIfCfgEchoCancelCoverage.37 = INTEGER: 4 CISCO-VOICE-IF-MIB::cvIfCfgEchoCancelCoverage.38 = INTEGER: 4 CISCO-VOICE-IF-MIB::cvIfCfgConnectionMode.37 = INTEGER: normal(1) CISCO-VOICE-IF-MIB::cvIfCfgConnectionMode.38 = INTEGER: normal(1) CISCO-VOICE-IF-MIB::cvIfCfgConnectionNumber.37 = STRING: CISCO-VOICE-IF-MIB::cvIfCfgConnectionNumber.38 = STRING: CISCO-VOICE-IF-MIB::cvIfCfgInitialDigitTimeOut.37 = INTEGER: 10 seconds CISCO-VOICE-IF-MIB::cvIfCfgInitialDigitTimeOut.38 = INTEGER: 10 seconds CISCO-VOICE-IF-MIB::cvIfCfgInterDigitTimeOut.37 = INTEGER: 10 seconds CISCO-VOICE-IF-MIB::cvIfCfgInterDigitTimeOut.38 = INTEGER: 10 seconds CISCO-VOICE-IF-MIB::cvIfCfgRegionalTone.37 = STRING: "US" CISCO-VOICE-IF-MIB::cvIfCfgRegionalTone.38 = STRING: "US" CISCO-VOICE-IF-MIB::cvIfCfgEntry.13.37 = INTEGER: 1 CISCO-VOICE-IF-MIB::cvIfCfgEntry.13.38 = INTEGER: 1 CISCO-VOICE-IF-MIB::cvIfCfgEntry.14.37 = INTEGER: 1 CISCO-VOICE-IF-MIB::cvIfCfgEntry.14.38 = INTEGER: 1
Esta saída mostra o snmpwalk completo de ciscoVoiceDialControlMIB de CISCO-VOICE-DIAL-CONTROL-MIB no momento dos comandos de verificação de VoIP mostrados neste documento:
snmpwalk -c public 172.16.100.20 CISCO-VOICE-DIAL-CONTROL-MIB:ciscoVoiceDialControlMIB CISCO-VOICE-DIAL-CONTROL-MIB::cvGeneralPoorQoVNotificationEnable.0 = INTEGER: true(1) CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgIfIndex.1000 = INTEGER: 91 CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgIfIndex.2000 = INTEGER: 90 CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgType.1000 = INTEGER: voip(2) CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgType.2000 = INTEGER: voice(1) CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgRowStatus.1000 = INTEGER: active(1) CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgRowStatus.2000 = INTEGER: active(1) CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgEntry.5.1000 = INTEGER: 1 CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCfgEntry.5.2000 = INTEGER: 1 CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgSessionTarget.90 = STRING: CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgDialDigitsPrefix.90 = STRING: 9 CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgDIDCallEnable.90 = INTEGER: false(2) CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgCasGroup.90 = INTEGER: -1 CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgRegisterE164.90 = INTEGER: true(1) CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgForwardDigits.90 = INTEGER: -1 CISCO-VOICE-DIAL-CONTROL-MIB::cvVoicePeerCfgEntry.7.90 = INTEGER: 1 CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgSessionProtocol.91 = INTEGER: cisco(2) CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgDesiredQoS.91 = INTEGER: 1 CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgMinAcceptableQoS.91 = INTEGER: 1 CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgSessionTarget.91 = STRING: ipv4:172.16.99.22 CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgCoderRate.91 = INTEGER: g729IETFr8000(16) CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgFaxRate.91 = INTEGER: voiceRate(2) CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgVADEnable.91 = INTEGER: true(1) CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgExpectFactor.91 = INTEGER: 0 equipment impairment factor (eif) CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgIcpif.91 = INTEGER: 20 equipment impairment factor (eif) CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgPoorQoVNotificationEnable.91 = INTEGER: false(2) CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgUDPChecksumEnable.91 = INTEGER: false(2) CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgIPPrecedence.91 = INTEGER: 0 CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgTechPrefix.91 = STRING: CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgDigitRelay.91 = Hex-STRING: 00 CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgCoderBytes.91 = INTEGER: 20 bytes CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgFaxBytes.91 = INTEGER: 20 bytes CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgInBandSignaling.91 = INTEGER: cas(1) CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPPeerCfgEntry.23.91 = INTEGER: 1 CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgIncomingDnisDigits.90 = STRING: CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgIncomingDnisDigits.91 = STRING: CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgMaxConnections.90 = INTEGER: -1 connections CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgMaxConnections.91 = INTEGER: -1 connections CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgApplicationName.90 = STRING: CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgApplicationName.91 = STRING: CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgPreference.90 = INTEGER: 0 CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgPreference.91 = INTEGER: 0 CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgHuntStop.90 = INTEGER: false(2) CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgHuntStop.91 = INTEGER: false(2) CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.6.90 = "" CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.6.91 = "" CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.7.90 = "" CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.7.91 = "" CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.8.90 = "" CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.8.91 = "" CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.9.90 = "" CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.9.91 = "" CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.10.90 = "" CISCO-VOICE-DIAL-CONTROL-MIB::cvPeerCommonCfgEntry.10.91 = "" CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveConnectionId.1102799.1 = Hex-STRING: 53 98 B1 3F EB B7 11 D7 80 02 AA AD C2 77 19 FC CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveTxDuration.1102799.1 = Gauge32: 157515460 milliseconds CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveVoiceTxDuration.1102799.1 = Gauge32: 157514630 milliseconds CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveFaxTxDuration.1102799.1 = Gauge32: 0 milliseconds CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveCoderTypeRate.1102799.1 = INTEGER: ietfg729r8000(25) CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveNoiseLevel.1102799.1 = INTEGER: -56 dBm CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveACOMLevel.1102799.1 = INTEGER: 5 dB CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveOutSignalLevel.1102799.1 = INTEGER: -46 dBm CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveInSignalLevel.1102799.1 = INTEGER: -40 dBm CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveERLLevel.1102799.1 = INTEGER: 5 dB CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveSessionTarget.1102799.1 = STRING: CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveImgPageCount.1102799.1 = Gauge32: 0 pages CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveEntry.13.1102799.1 = "" CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveEntry.14.1102799.1 = INTEGER: 2 CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveEntry.15.1102799.1 = INTEGER: 19971 CISCO-VOICE-DIAL-CONTROL-MIB::cvCallActiveEntry.17.1102799.1 = INTEGER: 5 CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveConnectionId.1102966.1 = Hex-STRING: 53 98 B1 3F EB B7 11 D7 80 02 AA AD C2 77 19 FC CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRemoteIPAddress.1102966.1 = IpAddress: 172.16.99.22 CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRemoteUDPPort.1102966.1 = INTEGER: 19066 CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveRoundTripDelay.1102966.1 = Gauge32: 6 milliseconds CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveSelectedQoS.1102966.1 = INTEGER: 1 CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveSessionProtocol.1102966.1 = INTEGER: cisco(2) CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveSessionTarget.1102966.1 = STRING: ipv4:172.16.99.22 CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveOnTimeRvPlayout.1102966.1 = Gauge32: 157496940 milliseconds CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveGapFillWithSilence.1102966.1 = Gauge32: 1090 milliseconds CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveGapFillWithPrediction.1102966.1 = Gauge32: 3680 milliseconds CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveGapFillWithInterpolation.1102966.1 = Gauge32: 0 milliseconds CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveGapFillWithRedundancy.1102966.1 = Gauge32: 0 milliseconds CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveHiWaterPlayoutDelay.1102966.1 = Gauge32: 132 milliseconds CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveLoWaterPlayoutDelay.1102966.1 = Gauge32: 55 milliseconds CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveReceiveDelay.1102966.1 = Gauge32: 67 CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveVADEnable.1102966.1 = INTEGER: true(1) CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveCoderTypeRate.1102966.1 = INTEGER: ietfg729r8000(25) CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveLostPackets.1102966.1 = Gauge32: 52 packets CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEarlyPackets.1102966.1 = Gauge32: 1 packets CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveLatePackets.1102966.1 = Gauge32: 325 packets CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.21.1102966.1 = "" CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.22.1102966.1 = "" CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.23.1102966.1 = INTEGER: 1 CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.24.1102966.1 = STRING: "172.16.99.22" CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.25.1102966.1 = INTEGER: 1720 CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.26.1102966.1 = INTEGER: 1 CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.27.1102966.1 = STRING: "172.16.99.22" CISCO-VOICE-DIAL-CONTROL-MIB::cvVoIPCallActiveEntry.28.1102966.1 = INTEGER: 19066
Esta saída mostra o snmpwalk completo de ciscoVoiceCommonDialControlMIB de CISCO-VOICE-DIAL-CONTROL-MIB no momento dos comandos de verificação de VoIP mostrados neste documento:
snmpwalk -c public 172.16.100.20 CISCO-VOICE-COMMON-DIAL-CONTROL-MIB: ciscoVoiceCommonDialControlMIB CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveConnectionId. 1102966.1 = Hex-STRING: 53 98 B1 3F EB B7 11 D7 80 02 AA AD C2 77 19 FC CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveVADEnable. 1102966.1 = INTEGER: true(1) CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveCoderTypeRate. 1102966.1 = INTEGER: ietfg729r8000(25) CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveCodecBytes. 1102966.1 = INTEGER: 20 CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveInBandSignaling. 1102966.1 = INTEGER: cas(1) CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveEntry.6. 1102966.1 = "" CISCO-VOICE-COMMON-DIAL-CONTROL-MIB::cvCommonDcCallActiveEntry.7. 1102966.1 = INTEGER: 2
Esta saída mostra o snmpwalk completo de dialControlMib de DIAL-CONTROL-MIB no momento dos comandos de verificação de VoIP mostrados neste documento:
snmpwalk -c public 172.16.100.20 DIAL-CONTROL-MIB:dialControlMib DIAL-CONTROL-MIB::dialCtlAcceptMode.0 = INTEGER: acceptAll(2) DIAL-CONTROL-MIB::dialCtlTrapEnable.0 = INTEGER: enabled(1) DIAL-CONTROL-MIB::dialCtlPeerCfgIfType.1000.91 = INTEGER: voiceOverIp(104) DIAL-CONTROL-MIB::dialCtlPeerCfgIfType.2000.90 = INTEGER: voiceFXS(102) DIAL-CONTROL-MIB::dialCtlPeerCfgLowerIf.1000.91 = INTEGER: 0 DIAL-CONTROL-MIB::dialCtlPeerCfgLowerIf.2000.90 = INTEGER: 37 DIAL-CONTROL-MIB::dialCtlPeerCfgOriginateAddress.1000.91 = STRING: 1000 DIAL-CONTROL-MIB::dialCtlPeerCfgOriginateAddress.2000.90 = STRING: 2000 DIAL-CONTROL-MIB::dialCtlPeerCfgAnswerAddress.1000.91 = STRING: DIAL-CONTROL-MIB::dialCtlPeerCfgAnswerAddress.2000.90 = STRING: DIAL-CONTROL-MIB::dialCtlPeerCfgSubAddress.1000.91 = STRING: DIAL-CONTROL-MIB::dialCtlPeerCfgSubAddress.2000.90 = STRING: DIAL-CONTROL-MIB::dialCtlPeerCfgSpeed.1000.91 = INTEGER: 0 DIAL-CONTROL-MIB::dialCtlPeerCfgSpeed.2000.90 = INTEGER: 0 DIAL-CONTROL-MIB::dialCtlPeerCfgInfoType.1000.91 = INTEGER: speech(2) DIAL-CONTROL-MIB::dialCtlPeerCfgInfoType.2000.90 = INTEGER: speech(2) DIAL-CONTROL-MIB::dialCtlPeerCfgPermission.1000.91 = INTEGER: both(3) DIAL-CONTROL-MIB::dialCtlPeerCfgPermission.2000.90 = INTEGER: both(3) DIAL-CONTROL-MIB::dialCtlPeerCfgInactivityTimer.1000.91 = INTEGER: 0 seconds DIAL-CONTROL-MIB::dialCtlPeerCfgInactivityTimer.2000.90 = INTEGER: 0 seconds DIAL-CONTROL-MIB::dialCtlPeerCfgMinDuration.1000.91 = INTEGER: 0 DIAL-CONTROL-MIB::dialCtlPeerCfgMinDuration.2000.90 = INTEGER: 0 DIAL-CONTROL-MIB::dialCtlPeerCfgMaxDuration.1000.91 = INTEGER: 0 DIAL-CONTROL-MIB::dialCtlPeerCfgMaxDuration.2000.90 = INTEGER: 0 DIAL-CONTROL-MIB::dialCtlPeerCfgCarrierDelay.1000.91 = INTEGER: 0 seconds DIAL-CONTROL-MIB::dialCtlPeerCfgCarrierDelay.2000.90 = INTEGER: 0 seconds DIAL-CONTROL-MIB::dialCtlPeerCfgCallRetries.1000.91 = INTEGER: 0 DIAL-CONTROL-MIB::dialCtlPeerCfgCallRetries.2000.90 = INTEGER: 0 DIAL-CONTROL-MIB::dialCtlPeerCfgRetryDelay.1000.91 = INTEGER: 0 seconds DIAL-CONTROL-MIB::dialCtlPeerCfgRetryDelay.2000.90 = INTEGER: 0 seconds DIAL-CONTROL-MIB::dialCtlPeerCfgFailureDelay.1000.91 = INTEGER: 0 seconds DIAL-CONTROL-MIB::dialCtlPeerCfgFailureDelay.2000.90 = INTEGER: 0 seconds DIAL-CONTROL-MIB::dialCtlPeerCfgTrapEnable.1000.91 = INTEGER: disabled(2) DIAL-CONTROL-MIB::dialCtlPeerCfgTrapEnable.2000.90 = INTEGER: disabled(2) DIAL-CONTROL-MIB::dialCtlPeerCfgStatus.1000.91 = INTEGER: active(1) DIAL-CONTROL-MIB::dialCtlPeerCfgStatus.2000.90 = INTEGER: active(1) DIAL-CONTROL-MIB::dialCtlPeerStatsConnectTime.1000.91 = Gauge32: 0 seconds DIAL-CONTROL-MIB::dialCtlPeerStatsConnectTime.2000.90 = Gauge32: 0 seconds DIAL-CONTROL-MIB::dialCtlPeerStatsChargedUnits.1000.91 = Gauge32: 0 DIAL-CONTROL-MIB::dialCtlPeerStatsChargedUnits.2000.90 = Gauge32: 0 DIAL-CONTROL-MIB::dialCtlPeerStatsSuccessCalls.1000.91 = Gauge32: 0 DIAL-CONTROL-MIB::dialCtlPeerStatsSuccessCalls.2000.90 = Gauge32: 0 DIAL-CONTROL-MIB::dialCtlPeerStatsFailCalls.1000.91 = Gauge32: 0 DIAL-CONTROL-MIB::dialCtlPeerStatsFailCalls.2000.90 = Gauge32: 0 DIAL-CONTROL-MIB::dialCtlPeerStatsAcceptCalls.1000.91 = Gauge32: 0 DIAL-CONTROL-MIB::dialCtlPeerStatsAcceptCalls.2000.90 = Gauge32: 0 DIAL-CONTROL-MIB::dialCtlPeerStatsRefuseCalls.1000.91 = Gauge32: 0 DIAL-CONTROL-MIB::dialCtlPeerStatsRefuseCalls.2000.90 = Gauge32: 0 DIAL-CONTROL-MIB::dialCtlPeerStatsLastDisconnectCause.1000.91 = "" DIAL-CONTROL-MIB::dialCtlPeerStatsLastDisconnectCause.2000.90 = "" DIAL-CONTROL-MIB::dialCtlPeerStatsLastDisconnectText.1000.91 = STRING: DIAL-CONTROL-MIB::dialCtlPeerStatsLastDisconnectText.2000.90 = STRING: DIAL-CONTROL-MIB::dialCtlPeerStatsLastSetupTime.1000.91 = Timeticks: (1102966) 3:03:49.66 DIAL-CONTROL-MIB::dialCtlPeerStatsLastSetupTime.2000.90 = Timeticks: (1102799) 3:03:47.99 DIAL-CONTROL-MIB::callActivePeerAddress.1102799.1 = STRING: 2000 DIAL-CONTROL-MIB::callActivePeerAddress.1102966.1 = STRING: 1000 DIAL-CONTROL-MIB::callActivePeerSubAddress.1102799.1 = STRING: DIAL-CONTROL-MIB::callActivePeerSubAddress.1102966.1 = STRING: DIAL-CONTROL-MIB::callActivePeerId.1102799.1 = INTEGER: 2000 DIAL-CONTROL-MIB::callActivePeerId.1102966.1 = INTEGER: 1000 DIAL-CONTROL-MIB::callActivePeerIfIndex.1102799.1 = INTEGER: 90 DIAL-CONTROL-MIB::callActivePeerIfIndex.1102966.1 = INTEGER: 91 DIAL-CONTROL-MIB::callActiveLogicalIfIndex.1102799.1 = INTEGER: 37 DIAL-CONTROL-MIB::callActiveLogicalIfIndex.1102966.1 = INTEGER: 0 DIAL-CONTROL-MIB::callActiveConnectTime.1102799.1 = Timeticks: (1104123) 3:04:01.23 DIAL-CONTROL-MIB::callActiveConnectTime.1102966.1 = Timeticks: (1104123) 3:04:01.23 DIAL-CONTROL-MIB::callActiveCallState.1102799.1 = INTEGER: active(4) DIAL-CONTROL-MIB::callActiveCallState.1102966.1 = INTEGER: active(4) DIAL-CONTROL-MIB::callActiveCallOrigin.1102799.1 = INTEGER: answer(2) DIAL-CONTROL-MIB::callActiveCallOrigin.1102966.1 = INTEGER: originate(1) DIAL-CONTROL-MIB::callActiveChargedUnits.1102799.1 = Gauge32: 0 DIAL-CONTROL-MIB::callActiveChargedUnits.1102966.1 = Gauge32: 0 DIAL-CONTROL-MIB::callActiveInfoType.1102799.1 = INTEGER: speech(2) DIAL-CONTROL-MIB::callActiveInfoType.1102966.1 = INTEGER: speech(2) DIAL-CONTROL-MIB::callActiveTransmitPackets.1102799.1 = Gauge32: 7875641 DIAL-CONTROL-MIB::callActiveTransmitPackets.1102966.1 = Gauge32: 7875388 DIAL-CONTROL-MIB::callActiveTransmitBytes.1102799.1 = Gauge32: 157512782 DIAL-CONTROL-MIB::callActiveTransmitBytes.1102966.1 = Gauge32: 157507741 DIAL-CONTROL-MIB::callActiveReceivePackets.1102799.1 = Gauge32: 7875955 DIAL-CONTROL-MIB::callActiveReceivePackets.1102966.1 = Gauge32: 7875641 DIAL-CONTROL-MIB::callActiveReceiveBytes.1102799.1 = Gauge32: 157519081 DIAL-CONTROL-MIB::callActiveReceiveBytes.1102966.1 = Gauge32: 157512782 DIAL-CONTROL-MIB::callHistoryTableMaxLength.0 = INTEGER: 50 DIAL-CONTROL-MIB::callHistoryRetainTimer.0 = INTEGER: 15 minutes