T.37 OffRamp Faxing

Opções de download

  • PDF     (150.8 KB)
    Ver no Adobe Reader em vários dispositivos
  • ePub     (97.5 KB)
    Ver em vários aplicativos no iPhone, iPad, Android, Sony Reader ou Windows Phone
  • Mobi (Kindle)     (90.9 KB)
    Ver no dispositivo Kindle ou no aplicativo Kindle em vários dispositivos
Atualizado:2 de fevereiro de 2006
ID do documento:47764

Linguagem imparcial

O conjunto de documentação deste produto faz o possível para usar uma linguagem imparcial. Para os fins deste conjunto de documentação, a imparcialidade é definida como uma linguagem que não implica em discriminação baseada em idade, deficiência, gênero, identidade racial, identidade étnica, orientação sexual, status socioeconômico e interseccionalidade. Pode haver exceções na documentação devido à linguagem codificada nas interfaces de usuário do software do produto, linguagem usada com base na documentação de RFP ou linguagem usada por um produto de terceiros referenciado. Saiba mais sobre como a Cisco está usando a linguagem inclusiva.

Sobre esta tradução

A Cisco traduziu este documento com a ajuda de tecnologias de tradução automática e humana para oferecer conteúdo de suporte aos seus usuários no seu próprio idioma, independentemente da localização. Observe que mesmo a melhor tradução automática não será tão precisa quanto as realizadas por um tradutor profissional. A Cisco Systems, Inc. não se responsabiliza pela precisão destas traduções e recomenda que o documento original em inglês (link fornecido) seja sempre consultado.

Introduction

Esta seção do principal documento Fax sobre IP T.37 Store e Forward Fax concentra-se no envio de fax de armazenamento e encaminhamento OffRamp. OffRamp T.37 é o processo pelo qual um gateway aceita um e-mail, converte esse e-mail em um fax e o envia através de uma porta de voz.

Este documento contém a configuração necessária para tornar o recurso operacional. A seção Troubleshoot aborda os comandos debug úteis e como interpretar seu significado. A topologia usada é mostrada na seção Diagrama de Rede.

Prerequisites

Requirements

Os requisitos específicos para este documento estão especificados na seção principal, Fax sobre IP T.37 Store e Forward Fax.

Componentes Utilizados

Este documento não se restringe a versões de software e hardware específicas.

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Conventions

For more information on document conventions, refer to the Cisco Technical Tips Conventions.

Configuração

Nas seções abaixo, primeiro os parâmetros de configuração do Cisco IOS® Software relevantes para a configuração de fax OffRamp são explicados e, em seguida, a configuração 5300 é exibida com mais notas, esclarecendo as funções de comandos importantes.

Diagrama de Rede

Este documento utiliza a instalação de rede mostrada no diagrama abaixo.

offramp_faxing1.gif

Parâmetros de configuração

Abaixo estão os comandos comuns usados na configuração OffRamp do gateway:

Parâmetros obrigatórios:
fax interface-type fax-mail Ativa a funcionalidade T.37 para o gateway. Requer uma reinicialização no 5300, mas não no 5350 ou 5400.
mta receive aliases Define um nome de host a ser usado como um alias para o gateway OffRamp. Até dez podem ser definidos. O gateway aceita e-mails de entrada se o nome de host de destino do e-mail de entrada corresponder a um alias.
mta receive maximum-recipients Define o número máximo de destinatários simultâneos do protocolo SMTP tratados por este gateway.
número de voz de peer de discagem mmoip aplicativo offramp número chamado de entrada fax do tipo informação O comando application offramp se refere ao comando call application voice name. O nome corresponde a offramp. O comando incoming called-number é usado para corresponder a essa entrada de peer do Multimedia Mail over IP (MMoIP). O comando information-type fax identifica as chamadas associadas a esse peer como sendo transmissões de fax.
localização do nome de voz do aplicativo de chamada Define um nome global para o aplicativo (offramp, neste caso) e sua localização (em um servidor TFTP externo, neste caso).
Parâmetros opcionais:
fax send transmit-subscriber Define a identificação do assinante transmissor (ETI).
fax send center-header fax send left-header fax send right-header As opções são: {$a$ | $d$ | $p$ | $s$ | $ | string}
  • $a$ — Data
  • $d$ — Endereço de destino
  • $s$ — Endereço do remetente
  • $p$ — Contagem de páginas
  • $t$ — Tempo de transmissão
Use o argumento string neste comando para inserir uma string de texto personalizada.
fax send coverpage As opções são:
  • enable —Permite que o gateway OffRamp envie uma folha de rosto.
  • comentário — Adiciona comentários personalizados à folha de rosto.
  • show-detail — Imprime o cabeçalho inteiro do e-mail como parte da folha de rosto.
mta receive generate-mdn Permite que o gateway OffRamp responda a solicitações de notificação de disposição de mensagens (MDN).

Configuração OffRamp

Os emails foram enviados do Outlook Express para o gateway fora do alcance (vdtl-5350-8a) e foram enviados para vários destinos.

vdtl-5350-8a# show run
Building configuration...

Current configuration : 6415 bytes
!
!
version 12.2
service timestamps debug datetime msec localtime
service timestamps log datetime msec localtime
no service password-encryption
!
hostname vdtl-5350-8a
!
boot system flash c5350-is-mz.122-7.6.T1
enable secret 5 $1$MmyY$IQ3OW1Yfd9xjOJj5lYaC7.
!
!
resource-pool disable
clock timezone EST -5
!
!
ip subnet-zero
ip cef
ip domain-name testlab-t37.com
ip name-server 172.18.106.36
!
isdn switch-type primary-5ess
!
!
fax send transmitting-subscriber $s$
fax send left-header $t$
fax send center-header $s$
fax send right-header $p$
fax send coverpage enable
fax send coverpage show-detail
fax send coverpage comment vdtl-5350-8a Offramp Cover Page
fax interface-type fax-mail
mta receive aliases vdtl-5350-8a.testlab-t37.com
mta receive aliases 15.80.8.107
mta receive maximum-recipients 100
call-history-mib retain-timer 500
call-history-mib max-size 500
!
controller T1 3/0
framing esf
linecode b8zs
pri-group timeslots 1-24
! 
!
interface FastEthernet0/0
ip address 15.80.8.107 255.255.255.0
! 
interface Serial3/0:23
no ip address
isdn switch-type primary-5ess
isdn incoming-voice modem
!
interface Async1/00
no ip address
!
interface Async1/107
no ip address
!
interface Group-Async0
no ip address
no group-range
!
ip classless
ip route 0.0.0.0 0.0.0.0 15.80.8.1
no ip http server
ip pim bidir-enable
!
!
call rsvp-sync
!
call application voice offramp tftp://172.18.106.10/fax/offramp/app_libretto_offramp.2.0.1.1.tcl
! 
voice-port 3/0:D
!
!
mgcp profile default
!
dial-peer voice 9813182 pots
incoming called-number 9813182
destination-pattern 9[2-9]......
direct-inward-dial
port 3/0:D
forward-digits all
!
dial-peer voice 1 mmoip
application offramp
incoming called-number 9.......
information-type fax
!
!
line con 0
exec-timeout 0 0
line aux 0
line vty 0 4
password ww
login
line 1/00 1/107
no flush-at-activation
modem InOut
!
scheduler allocate 10000 400
ntp clock-period 17179848
ntp server 172.18.106.15
end

vdtl-5350-8a#

Troubleshoot

Este documento é uma continuação do T.37 OnRamp Faxing. A maioria das referências de comandos listadas nesse documento também é usada para fax OffRamp. Consulte esse documento para obter mais informações.

Depurações com Falha

Estes são os registros de saída do comando debug de uma chamada de fax malsucedida. Este comando debug foi emitido em um gateway Cisco 5350, que está atuando como gateway de fax OffRamp para a rede neste exemplo.

vdtl-5350-8a# debug mta receive all
All email receive debugging is on
vdtl-5350-8a#
Mar 26 12:15:02.372: esmtp_server_work: calling ehlo 
Mar 26 12:15:02.780: esmtp_server_work: calling mail 
Mar 26 12:15:03.280: esmtp_server_work: calling rcpt 
Mar 26 12:15:03.780: esmtp_server_work: calling data 
Mar 26 12:15:04.280: (S)R: 'Received: from andyw2k ([172.18.106.183]) by
 vnt-smtp.testlab-t37.com with Microsoft SMTPSVC(5.0.2195.4453);'
Mar 26 12:15:04.280: (S)R: ' Tue, 26 Mar 2002 12:13:50 -0500'
Mar 26 12:15:04.280: (S)R: 'Message-ID: <000301c1d4e9$c3a937c0$b76a12ac@amer.cisco.com>'
Mar 26 12:15:04.280: (S)R: 'From: "Andy" <andy@testlab-t37.com>'
Mar 26 12:15:04.280: (S)R: 'To: <FAX=98915510@vdtl-5350-8a.testlab-t37.com>'
Mar 26 12:15:04.280: (S)R: 'Subject: test email with WinFax Pro...'
Mar 26 12:15:04.284: (S)R: 'MIME-Version: 1.0'
Mar 26 12:15:04.284: (S)R: 'Content-Type: multipart/mixed;'
Mar 26 12:15:04.284: (S)R: ' boundary="/en/US/docs/net_mgmt/wan_service_administrator/1.1/administrator/guide/getstart.html=_NextPart_000_0000_01C1D4BF.DABAC5C0"'
Mar 26 12:15:04.284: (S)R: 'X-Mailer: Microsoft Outlook Express 6.00.2600.0000'
Mar 26 12:15:04.284: (S)R: 'X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000'
Mar 26 12:15:04.284: (S)R: 'Return-Path: andy@testlab-t37.com'
Mar 26 12:15:04.284: (S)R: 'X-OriginalArrivalTime: 26 Mar 2002 17:13:50.0153 (UTC)
 FILETIME=[98F1B390:01C1D4E9]'
Mar 26 12:15:04.284: (S)R: 'Date: 26 Mar 2002 12:13:50 -0500'
Mar 26 12:15:04.284: (S)R: ''
Mar 26 12:15:04.284: esmtp_server_engine_new_part: Field name : message-id:
 Field Value : <000301c1d4e9$c3a937c0$b76a12ac@amer.cisco.com> 
Field name : from: Field Value : "Andy" <andy@testlab-t37.com> 
Field name : to: Field Value : <FAX=98915510@vdtl-5350-8a.testlab-t37.com> 
Field name : subject: Field Value : test email with WinFax Pro... 
Field name : Content-Type: Field Value : multipart/mixed;
 boundary="/en/US/docs/net_mgmt/wan_service_administrator/1.1/administrator/guide/getstart.html=_NextPart_000_0000_01C1D4BF.DABAC5C0" 
Field name : date: Field Value : 26 Mar 2002 12:13:50 -0500
Mar 26 12:15:04.284: (S)R: 'Content-Type: text/plain;'
Mar 26 12:15:04.284: (S)R: ' charset="iso-8859-1"'
Mar 26 12:15:04.284: (S)R: 'Content-Transfer-Encoding: quoted-printable'
Mar 26 12:15:04.284: (S)R: ''
Mar 26 12:15:04.284: esmtp_server_engine_new_part: Field name : Content-Type:
 Field Value : text/plain; charset="iso-8859-1" 
Field name : Content-Transfer-Encoding: Field Value : quoted-printable
Mar 26 12:15:04.284: esmtp_server_work: freeing temp header
Mar 26 12:15:04.284: (S)R: 'Content-Type: application/x-msdownload;'
Mar 26 12:15:04.284: (S)R: ' name="FAX2B.exe"'
Mar 26 12:15:04.284: (S)R: 'Content-Transfer-Encoding: base64'
Mar 26 12:15:04.284: (S)R: 'Content-Disposition: attachment;'
Mar 26 12:15:04.284: (S)R: ' filename="FAX2B.exe"'
Mar 26 12:15:04.284: (S)R: ''
Mar 26 12:15:04.284: esmtp_server_engine_new_part: Field name : Content-Type:
 Field Value : application/x-msdownload; name="FAX2B.exe" 
Field name : Content-Transfer-Encoding: Field Value : base64
Mar 26 12:15:04.284: esmtp_server_work: freeing temp header
Mar 26 12:15:04.288: esmtp_server_work: Unrecognized/handled MIME content
 type rejected
Mar 26 12:15:04.600: (S)R: ''
Mar 26 12:15:04.600: esmtp_server_engine_new_part: 
Mar 26 12:15:04.600: esmtp_server_work: freeing temp header
Mar 26 12:15:04.600: esmtp_server_dot_check: Found the terminating Dot!
Mar 26 12:15:04.600: rejectMessage: 
Mar 26 12:15:22.052: esmtp_server_engine_update_recipient_status: status=7
Mar 26 12:16:09.156: esmtp_server_engine_get_statistics: ctx=0x6363AA38,
 smtpStatus=14
Mar 26 12:16:09.156: esmtp_server_engine_update_recipient_status: status=24
Mar 26 12:16:19.600: esmtp_server_engine_generate_notification: 
Mar 26 12:16:20.264: esmtp_server_work: calling quit 
Mar 26 12:16:20.264: esmtp_server_closesocket: esmtp_server: closing socket 1
Mar 26 12:16:20.264: esmtp_server_engine_clear_state: 
Mar 26 12:16:20.264: freeing RECIPIENT context
 (envelope=FAX=98915510@vdtl-5350-8a.testlab-t37.com)
Mar 26 12:16:20.264: esmtp_server_work: Freeing SMTP ctx at 0x6363AA38
Mar 26 12:16:20.264: esmtp_server: returned from work, context freed
vdtl-5350-8a#

Depurações de trabalho

Estes são os registros de saída do comando debug de uma chamada de fax bem-sucedida. Os comandos debug foram emitidos novamente em um gateway Cisco 5350, que é o gateway de fax OffRamp neste exemplo.

vdtl-5350-8a# debug mta receive all
All email receive debugging is on
vdtl-5350-8a#
Mar 26 11:20:17.231: esmtp_server_work: calling ehlo 
Mar 26 11:20:17.683: esmtp_server_work: calling mail 
Mar 26 11:20:18.183: esmtp_server_work: calling rcpt 
Mar 26 11:20:18.683: esmtp_server_work: calling data 
Mar 26 11:20:19.183: (S)R: 'Received: from andyw2k ([172.18.106.183]) by
 vnt-smtp.testlab-t37.com with Microsoft SMTPSVC(5.0.2195.4453);'
Mar 26 11:20:19.187: (S)R: ' Tue, 26 Mar 2002 11:19:05 -0500'
Mar 26 11:20:19.187: (S)R: 'Message-ID: <000901c1d4e2$1d55bc60$b76a12ac@amer.cisco.com>'
Mar 26 11:20:19.187: (S)R: 'Reply-To: "Andy" <andy@testlab-t37.com>'
Mar 26 11:20:19.187: (S)R: 'From: "Andy" <andy@testlab-t37.com>'
Mar 26 11:20:19.187: (S)R: 'To: <FAX=98915510@vdtl-5350-8a.testlab-t37.com>'
Mar 26 11:20:19.187: (S)R: 'Subject: Test fax '
Mar 26 11:20:19.187: (S)R: 'Date: Tue, 26 Mar 2002 11:20:16 -0500'
Mar 26 11:20:19.187: (S)R: 'MIME-Version: 1.0'
Mar 26 11:20:19.187: (S)R: 'Content-Type: multipart/mixed;'
Mar 26 11:20:19.187: (S)R: ' boundary="/en/US/docs/net_mgmt/wan_service_administrator/1.1/administrator/guide/getstart.html=_NextPart_000_0005_01C1D4B8.34737F60"'
Mar 26 11:20:19.187: (S)R: 'X-Priority: 3'
Mar 26 11:20:19.187: (S)R: 'X-MSMail-Priority: Normal'
Mar 26 11:20:19.187: (S)R: 'X-Mailer: Microsoft Outlook Express 6.00.2600.0000'
Mar 26 11:20:19.187: (S)R: 'X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000'
Mar 26 11:20:19.187: (S)R: 'Return-Path: andy@testlab-t37.com'
Mar 26 11:20:19.187: (S)R: 'X-OriginalArrivalTime: 26 Mar 2002 16:19:05.0120 (UTC)
 FILETIME=[F2E97200:01C1D4E1]'
Mar 26 11:20:19.187: (S)R: ''
Mar 26 11:20:19.187: esmtp_server_engine_new_part: Field name : message-id:
 Field Value : <000901c1d4e2$1d55bc60$b76a12ac@amer.cisco.com> 
Field name : from: Field Value : "Andy" <andy@testlab-t37.com> 
Field name : to: Field Value : <FAX=98915510@vdtl-5350-8a.testlab-t37.com> 
Field name : subject: Field Value : Test fax 
Field name : date: Field Value : Tue, 26 Mar 2002 11:20:16 -0500 
Field name : Content-Type: Field Value : multipart/mixed;
 boundary="/en/US/docs/net_mgmt/wan_service_administrator/1.1/administrator/guide/getstart.html=_NextPart_000_0005_01C1D4B8.34737F60"
Mar 26 11:20:19.187: (S)R: 'Content-Type: multipart/alternative;'
Mar 26 11:20:19.187: (S)R: ' boundary="/en/US/docs/net_mgmt/wan_service_administrator/1.1/administrator/guide/getstart.html=_NextPart_001_0006_01C1D4B8.34737F60"'
Mar 26 11:20:19.187: (S)R: ''
Mar 26 11:20:19.187: esmtp_server_engine_new_part: Field name : Content-Type:
 Field Value : multipart/alternative; boundary="/en/US/docs/net_mgmt/wan_service_administrator/1.1/administrator/guide/getstart.html=_NextPart_001_0006_01C1D4B8.34737F60"
Mar 26 11:20:19.191: esmtp_server_work: freeing temp header
Mar 26 11:20:19.191: (S)R: 'Content-Type: text/plain;'
Mar 26 11:20:19.191: (S)R: ' charset="iso-8859-1"'
Mar 26 11:20:19.191: (S)R: 'Content-Transfer-Encoding: quoted-printable'
Mar 26 11:20:19.191: (S)R: ''
Mar 26 11:20:19.191: esmtp_server_engine_new_part: Field name : Content-Type:
 Field Value : text/plain; charset="iso-8859-1" 
Field name : Content-Transfer-Encoding: Field Value : quoted-printable
Mar 26 11:20:19.191: esmtp_server_work: freeing temp header
Mar 26 11:20:19.191: (S)R: 'Content-Type: text/html;'
Mar 26 11:20:19.191: (S)R: ' charset="iso-8859-1"'
Mar 26 11:20:19.191: (S)R: 'Content-Transfer-Encoding: quoted-printable'
Mar 26 11:20:19.191: (S)R: ''
Mar 26 11:20:19.191: esmtp_server_engine_new_part: Field name : Content-Type:
 Field Value : text/html; charset="iso-8859-1" 
Field name : Content-Transfer-Encoding: Field Value : quoted-printable
Mar 26 11:20:19.191: esmtp_server_work: freeing temp header
Mar 26 11:20:19.191: (S)R: ''
Mar 26 11:20:19.191: esmtp_server_engine_new_part: 
Mar 26 11:20:19.191: esmtp_server_work: freeing temp header
Mar 26 11:20:19.191: (S)R: 'Content-Type: text/plain;'
Mar 26 11:20:19.191: (S)R: ' name="New Text Document.txt"'
Mar 26 11:20:19.191: (S)R: 'Content-Transfer-Encoding: quoted-printable'
Mar 26 11:20:19.191: (S)R: 'Content-Disposition: attachment;'
Mar 26 11:20:19.191: (S)R: ' filename="New Text Document.txt"'
Mar 26 11:20:19.191: (S)R: ''
Mar 26 11:20:19.191: esmtp_server_engine_new_part: Field name : Content-Type:
 Field Value : text/plain; name="New Text Document.txt" 
Field name : Content-Transfer-Encoding: Field Value : quoted-printable
Mar 26 11:20:19.191: esmtp_server_work: freeing temp header
Mar 26 11:20:19.195: esmtp_server_engine_update_recipient_status: status=6
Mar 26 11:20:36.295: esmtp_server_engine_update_recipient_status: status=7
Mar 26 11:20:36.347: esmtp_server_engine_update_recipient_status: status=6
Mar 26 11:21:19.975: esmtp_server_engine_update_recipient_status: status=7
Mar 26 11:21:34.195: (S)R: ''
Mar 26 11:21:34.195: esmtp_server_engine_new_part: 
Mar 26 11:21:34.195: esmtp_server_work: freeing temp header
Mar 26 11:21:34.195: esmtp_server_dot_check: Found the terminating Dot!
Mar 26 11:21:34.275: esmtp_server_engine_update_recipient_status: status=6
Mar 26 11:22:40.491: esmtp_server_engine_update_recipient_status: status=7
Mar 26 11:22:58.379: esmtp_server_engine_get_statistics: ctx=0x63624708, smtpStatus=14
Mar 26 11:22:58.379: esmtp_server_engine_update_recipient_status: status=24
Mar 26 11:23:04.195: esmtp_server_engine_generate_notification: 
Mar 26 11:23:04.699: esmtp_server_work: calling quit 
Mar 26 11:23:04.699: esmtp_server_closesocket: esmtp_server: closing socket 1
Mar 26 11:23:04.699: esmtp_server_engine_clear_state: 
Mar 26 11:23:04.699: freeing RECIPIENT context
 (envelope=FAX=98915510@vdtl-5350-8a.testlab-t37.com)
Mar 26 11:23:04.699: esmtp_server_work: Freeing SMTP ctx at 0x63624708
Mar 26 11:23:04.699: esmtp_server: returned from work, context freed
vdtl-5350-8a#
vdtl-5350-8a# debug foip off-ramp 
FOIP Off ramp faxmail debugging is on
vdtl-5350-8a#
vdtl-5350-8a#
vdtl-5350-8a#
Mar 26 11:27:57.667: lapp off: CC_EV_CALL_HANDOFF, cid(0xA7)
Mar 26 11:27:57.667: loffHandoff: called number=98915510, callid=0xA7
Mar 26 11:27:57.667: loffSetupPeer: cid1(0xA7)
Mar 26 11:27:57.667: destPat(98915510),matched(1),pref(),tag(9913182),encap(1)
Mar 26 11:27:57.759: lapp off: CC_EV_CALL_PROCEEDING, cid(0xA8)
Mar 26 11:27:57.875: lapp off: CC_EV_CALL_ALERT, cid(0xA8)
Mar 26 11:28:07.487: lapp off: CC_EV_CALL_CONNECTED, cid(0xA8)
Mar 26 11:28:07.487: st=CALL_SETTING cid(0xA7,0x0,0x0,0xA8),cfid(0x0,0x0,0x0)
Mar 26 11:28:07.487: loffConnected
Mar 26 11:28:07.487: loffFlushPeerTagQueue cid(167) peer list: (empty)
Mar 26 11:28:07.487: lapp off: CC_EV_CONF_CREATE_DONE, cid(0xA8), cid2(0xA9), cfid(0x5F)
Mar 26 11:28:07.487: st=CONFERENCING3 cid(0xA7,0x0,0xA9,0xA8),cfid(0x0,0x0,0x5F)
Mar 26 11:28:07.487: loffConfDone3
Mar 26 11:28:15.419: lapp off: CC_EV_FROM_FMSP_ON_CALL_DETAIL, cid(0xA9)
Mar 26 11:28:15.419: st=WAIT_SESS_INFO cid(0xA7,0x0,0xA9,0xA8),cfid(0x0,0x0,0x5F)
Mar 26 11:28:15.419: loffSessionInfo
Mar 26 11:28:15.419: encd=1, resl=2, spd=27, min_scan_len=0, csid= andy-pc fax
Mar 26 11:28:15.419: lapp off: CC_EV_CONF_CREATE_DONE, cid(0xA9), cid2(0xAA), cfid(0x60)
Mar 26 11:28:15.419: st=CONFERENCING2 cid(0xA7,0xAA,0xA9,0xA8),cfid(0x0,0x60,0x5F)
Mar 26 11:28:15.419: loffConfDone2
Mar 26 11:28:15.419: loff_edit_cover_page: from_personal_name: 0, []
Mar 26 11:28:15.419: loff_edit_cover_page: 0, []
Mar 26 11:28:15.419: loff_edit_cover_page: [andy@testlab-t37.com]
--------------------------------------------------------------------------------
Title: vdtl-5350-8a Offramp Cover Page

To: 98915510

From: andy@testlab-t37.com

Date: Tue, 26 Mar 2002 11:27:55 -0500 

Subject: test with a word doc attachment... 

Details: 
Received: from andyw2k ([172.18.106.183]) by vnt-smtp.testlab-t37.com with Microsoft
 SMTPSVC(5.0.2195.44 Message-ID: <001301c1d4e3$2f020210$b76a12ac@amer.cisco.com> 
Reply-To: "Andy" <andy@testlab-t37.com> 
From: 
Andy" <andy@testlab-t37.com> 
To: <FAX=98915510@vdtl-5350-8a.testlab-t37.com> 
Subject: test with a word doc attachment... 
Date: Tue, 26 Mar 2002 11:27:55 -0500 
MIME-Version: 1.0 
Content-Type: multipart/mixed; boundary
"----=_NextPart_000_000F_01C1D4B9.46214BB0" 
X-Priority: 3 
X-MSMail-Priority: Normal 
X-Mailer: Microsoft Outlook Express 6.00.2600.0000 
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 
Return-Path: andy@testlab-t37.com 
X-OriginalArrivalTime: 26 Mar 2002 16:26:43.0619 (UTC) FILETIME=[0432D730:01C1D4E3]
--------------------------------------------------------------------------------


Mar 26 11:28:15.419: lapp off: CC_EV_CONF_CREATE_DONE, cid(0xAA), cid2(0xA7),
 cfid(0x61)
Mar 26 11:28:15.419: st=CONFERENCING1 cid(0xA7,0xAA,0xA9,0xA8),cfid(0x61,0x60,0x5F)
Mar 26 11:28:15.419: loffConfDone1
Mar 26 11:28:15.451: lapp off: CC_EV_FROM_DMSP_ON_PAGE_PROCESSED, cid(0xAA):
 page number (0x1)
Mar 26 11:28:15.451: lapp off: CC_EV_GENERATE_PAGE_RSP, cid(0xAA)
Mar 26 11:28:15.451: lapp off: CC_EV_FROM_DMSP_ON_PAGE_PROCESSED, cid(0xAA):
 page number (0x2)
Mar 26 11:28:51.875: lapp off: CC_EV_CALL_DISCONNECTED, cid(0xA9)
Mar 26 11:28:51.875: cause 0x10(normal call clearing (16))
Mar 26 11:28:51.875: st=CONFERENCED cid(0xA7,0xAA,0xA9,0xA8),cfid(0x61,0x60,0x5F)
Mar 26 11:28:51.875: loffDisconnected
Mar 26 11:28:51.875: loffSetDiscCause: cause=normal call clearing (16)
Mar 26 11:28:51.875: loffRemoveConf
Mar 26 11:28:51.875: lapp off: CC_EV_CONF_DESTROY_DONE, cid(0xAA), cid2(0xA7),
 cfid(0x61)
Mar 26 11:28:51.875: st=CONF_REMOVING cid(0xA7,0xAA,0xA9,0xA8),cfid(0x61,0x60,0x5F)
Mar 26 11:28:51.875: loffConfRemoving: cfid=0x61, cnt=3
Mar 26 11:28:51.875: lapp off: CC_EV_CONF_DESTROY_DONE, cid(0xA9), cid2(0xAA),
 cfid(0x60)
Mar 26 11:28:51.879: st=CONF_REMOVING cid(0xA7,0xAA,0xA9,0xA8),cfid(0x0,0x60,0x5F)
Mar 26 11:28:51.879: loffConfRemoving: cfid=0x60, cnt=2
Mar 26 11:28:51.879: lapp off: CC_EV_CONF_DESTROY_DONE, cid(0xA8), cid2(0xA9),
 cfid(0x5F)
Mar 26 11:28:51.879: st=CONF_REMOVING cid(0xA7,0xAA,0xA9,0xA8),cfid(0x0,0x0,0x5F)
Mar 26 11:28:51.879: loffConfRemoving: cfid=0x5F, cnt=1
Mar 26 11:28:51.879: loffDisconnect4 cid=0xA8
Mar 26 11:28:54.363: loff_call_history: cid=0xA8,(0xA7,0xAA,0xA9,0xA8)
Mar 26 11:28:54.363: lapp off: CC_EV_CALL_DISCONNECT_DONE, cid(0xA8)
Mar 26 11:28:54.363: st=WAIT_DISC_DONE4 cid(0xA7,0xAA,0xA9,0xA8),cfid(0x0,0x0,0x0)
Mar 26 11:28:54.363: loffWaitDiscDone4
Mar 26 11:28:54.363: loff_call_history: cid=0xA9,(0xA7,0xAA,0xA9,0x0)
Mar 26 11:28:54.363: lapp off: CC_EV_CALL_DISCONNECT_DONE, cid(0xA9)
Mar 26 11:28:54.363: st=DISCONNECTING cid(0xA7,0xAA,0xA9,0x0),cfid(0x0,0x0,0x0)
Mar 26 11:28:54.363: loffDisconnecting
Mar 26 11:28:54.363: loff_call_history: cid=0xAA,(0xA7,0xAA,0x0,0x0)
Mar 26 11:28:54.363: lapp off: CC_EV_CALL_DISCONNECT_DONE, cid(0xAA)
Mar 26 11:28:54.363: st=DISCONNECTING cid(0xA7,0xAA,0x0,0x0),cfid(0x0,0x0,0x0)
Mar 26 11:28:54.363: loffDisconnecting
Mar 26 11:28:54.363: loff_call_history: cid=0xA7,(0xA7,0x0,0x0,0x0)
Mar 26 11:28:54.363: lapp off: CC_EV_CALL_DISCONNECT_DONE, cid(0xA7)
Mar 26 11:28:54.363: st=DISCONNECTING cid(0xA7,0x0,0x0,0x0),cfid(0x0,0x0,0x0)
Mar 26 11:28:54.363: loffDisconnecting
Mar 26 11:28:54.363: loffFinished
vdtl-5350-8a# debug fmsp send t30 
FMSP send t30 debugging is on
vdtl-5350-8a# debug fmsp receive t30 
FMSP receive t30 debugging is on
vdtl-5350-8a#
Mar 26 11:43:29.570: t30 call4Leg=173, state=4, substate=7
Mar 26 11:43:29.570: fax2_command_receive: NO_COMMAND, T1
timer is not expired
Mar 26 11:43:33.622: t30 call4Leg=173, state=4, substate=7
Mar 26 11:43:33.622: received flag of modulation:
0 
Mar 26 11:43:33.622: t30 call4Leg=173, state=4, substate=7
Mar 26 11:43:33.622: fax2_command_receive: NO_COMMAND, T1
timer is not expired
Mar 26 11:43:35.050: t30 call4Leg=173, state=4, substate=7
Mar 26 11:43:35.050: fax2_command_receive: PROCESSING
Mar 26 11:43:35.662: msg dump:FF C0 2 1E 86 66 4 C6 E B4 9E A6 36 2E 96 16 EE B6 4 4 4 4 4 
Mar 26 11:43:35.662: 
Mar 26 11:43:35.662: t30 call4Leg=173, state=4, substate=7
Mar 26 11:43:35.662: received: CSI remote id
string: andy-pc fax
Mar 26 11:43:35.662: t30 call4Leg=173, state=4, substate=7
Mar 26 11:43:35.662: fax2_command_receive: PROCESSING
Mar 26 11:43:35.930: t30 call4Leg=173, state=4, substate=7
Mar 26 11:43:35.930: fax2_command_receive: PROCESSING
Mar 26 11:43:36.198: msg dump:FF C8 1 0 76 1F 1 1 9 0 
Mar 26 11:43:36.198: 
Mar 26 11:43:36.198: t30 call4Leg=173, state=4, substate=7
Mar 26 11:43:36.198: fax2_command_receive: PROCESSING
Mar 26 11:43:36.326: t30 call4Leg=173, state=4, substate=19
Mar 26 11:43:36.326: received DIS_PACKET: BR: 9, resolution: 1,
encoding : 0, min scan line length : 0, remote_id_string: andy-pc fax 
Mar 26 11:43:36.326: t30 call4Leg=173, state=4, substate=21
Mar 26 11:43:36.330: send DCS_PACKET: BR: 9, resolution: 1,
encoding : 0, local_id_string: 
Mar 26 11:43:36.330: msg dump:FF C8 C1 0 46 1E 
Mar 26 11:43:36.330: 
Mar 26 11:43:36.330: t30 call4Leg=173, state=4, substate=24
Mar 26 11:43:36.330: fax2_response_receive: PROCESSING
Mar 26 11:43:41.834: t30 call4Leg=173, state=4, substate=24
Mar 26 11:43:41.834: received flag of modulation:
0 
Mar 26 11:43:41.834: t30 call4Leg=173, state=4, substate=24
Mar 26 11:43:41.834: fax2_response_receive: PROCESSING
Mar 26 11:43:42.670: t30 call4Leg=173, state=4, substate=24
Mar 26 11:43:42.670: fax2_response_receive: PROCESSING
Mar 26 11:43:42.750: msg dump:FF C8 21 
Mar 26 11:43:42.750: 
Mar 26 11:43:42.750: t30 call4Leg=173, state=4, substate=24
Mar 26 11:43:42.750: fax2_response_receive: PROCESSING
Mar 26 11:43:42.890: t30 call4Leg=173, state=4, substate=24
Mar 26 11:43:42.890: in response receive WAIT FOR CD
Mar 26 11:43:42.890: t30 call4Leg=173, state=4, substate=25
Mar 26 11:43:42.894: received CFR
Mar 26 11:43:49.290: t30 call4Leg=173, state=5, substate=44
Mar 26 11:43:49.290: throttling tx data, buffered data is
61
Mar 26 11:44:00.794: t30 call4Leg=173, state=6, substate=31
Mar 26 11:44:00.794: send MPS 
Mar 26 11:44:00.794: t30 call4Leg=173, state=6, substate=32
Mar 26 11:44:00.794: fax2_response_receive: PROCESSING
Mar 26 11:44:03.222: t30 call4Leg=173, state=6, substate=32
Mar 26 11:44:03.222: received flag of modulation:
0 
Mar 26 11:44:03.222: t30 call4Leg=173, state=6, substate=32
Mar 26 11:44:03.226: fax2_response_receive: PROCESSING
Mar 26 11:44:04.066: t30 call4Leg=173, state=6, substate=32
Mar 26 11:44:04.066: fax2_response_receive: PROCESSING
Mar 26 11:44:04.146: msg dump:FF C8 31 
Mar 26 11:44:04.146: 
Mar 26 11:44:04.146: t30 call4Leg=173, state=6, substate=32
Mar 26 11:44:04.146: fax2_response_receive: PROCESSING
Mar 26 11:44:04.294: t30 call4Leg=173, state=6, substate=32
Mar 26 11:44:04.294: in response receive WAIT FOR CD
Mar 26 11:44:04.294: t30 call4Leg=173, state=6, substate=33
Mar 26 11:44:04.294: received MCF 
Mar 26 11:44:32.494: t30 call4Leg=173, state=6, substate=31
Mar 26 11:44:32.494: send MPS 
Mar 26 11:44:32.494: t30 call4Leg=173, state=6, substate=32
Mar 26 11:44:32.494: fax2_response_receive: PROCESSING
Mar 26 11:44:34.950: t30 call4Leg=173, state=6, substate=32
Mar 26 11:44:34.950: received flag of modulation:
0 
Mar 26 11:44:34.950: t30 call4Leg=173, state=6, substate=32
Mar 26 11:44:34.950: fax2_response_receive: PROCESSING
Mar 26 11:44:35.786: t30 call4Leg=173, state=6, substate=32
Mar 26 11:44:35.786: fax2_response_receive: PROCESSING
Mar 26 11:44:35.870: msg dump:FF C8 31 
Mar 26 11:44:35.870: 
Mar 26 11:44:35.870: t30 call4Leg=173, state=6, substate=32
Mar 26 11:44:35.870: fax2_response_receive: PROCESSING
Mar 26 11:44:36.018: t30 call4Leg=173, state=6, substate=32
Mar 26 11:44:36.018: in response receive WAIT FOR CD
Mar 26 11:44:36.018: t30 call4Leg=173, state=6, substate=33
Mar 26 11:44:36.018: received MCF 
Mar 26 11:45:08.118: t30 call4Leg=173, state=6, substate=31
Mar 26 11:45:08.118: send MPS 
Mar 26 11:45:08.118: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:08.118: fax2_response_receive: PROCESSING
Mar 26 11:45:10.778: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:10.778: received flag of modulation:
0 
Mar 26 11:45:10.778: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:10.778: fax2_response_receive: PROCESSING
Mar 26 11:45:11.618: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:11.618: fax2_response_receive: PROCESSING
Mar 26 11:45:11.694: msg dump:FF C8 31 
Mar 26 11:45:11.694: 
Mar 26 11:45:11.694: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:11.694: fax2_response_receive: PROCESSING
Mar 26 11:45:11.846: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:11.846: in response receive WAIT FOR CD
Mar 26 11:45:11.846: t30 call4Leg=173, state=6, substate=33
Mar 26 11:45:11.846: received MCF 
Mar 26 11:45:30.550: t30 call4Leg=173, state=6, substate=31
Mar 26 11:45:30.550: send MPS 
Mar 26 11:45:30.550: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:30.550: fax2_response_receive: PROCESSING
Mar 26 11:45:33.034: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:33.034: received flag of modulation:
0 
Mar 26 11:45:33.034: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:33.034: fax2_response_receive: PROCESSING
Mar 26 11:45:33.874: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:33.874: fax2_response_receive: PROCESSING
Mar 26 11:45:33.950: msg dump:FF C8 31 
Mar 26 11:45:33.950: 
Mar 26 11:45:33.950: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:33.950: fax2_response_receive: PROCESSING
Mar 26 11:45:34.102: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:34.102: in response receive WAIT FOR CD
Mar 26 11:45:34.102: t30 call4Leg=173, state=6, substate=33
Mar 26 11:45:34.102: received MCF 
Mar 26 11:45:39.006: t30 call4Leg=173, state=5, substate=27
Mar 26 11:45:39.006: un-throttling tx data, buffered data is
6
Mar 26 11:45:39.206: t30 call4Leg=173, state=6, substate=31
Mar 26 11:45:39.206: send MPS 
Mar 26 11:45:39.206: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:39.206: fax2_response_receive: PROCESSING
Mar 26 11:45:41.634: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:41.634: received flag of modulation:
0 
Mar 26 11:45:41.634: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:41.634: fax2_response_receive: PROCESSING
Mar 26 11:45:42.470: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:42.470: fax2_response_receive: PROCESSING
Mar 26 11:45:42.554: msg dump:FF C8 31 
Mar 26 11:45:42.554: 
Mar 26 11:45:42.554: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:42.554: fax2_response_receive: PROCESSING
Mar 26 11:45:42.702: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:42.702: in response receive WAIT FOR CD
Mar 26 11:45:42.702: t30 call4Leg=173, state=6, substate=33
Mar 26 11:45:42.702: received MCF 
Mar 26 11:45:47.602: t30 call4Leg=173, state=6, substate=31
Mar 26 11:45:47.602: send EOP 
Mar 26 11:45:47.602: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:47.602: fax2_response_receive: PROCESSING
Mar 26 11:45:50.022: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:50.022: received flag of modulation:
0 
Mar 26 11:45:50.022: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:50.022: fax2_response_receive: PROCESSING
Mar 26 11:45:50.866: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:50.866: fax2_response_receive: PROCESSING
Mar 26 11:45:50.942: msg dump:FF C8 31 
Mar 26 11:45:50.942: 
Mar 26 11:45:50.946: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:50.946: fax2_response_receive: PROCESSING
Mar 26 11:45:51.094: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:51.098: in response receive WAIT FOR CD
Mar 26 11:45:51.098: t30 call4Leg=173, state=6, substate=33
Mar 26 11:45:51.098: received MCF 
Mar 26 11:45:51.098: t30 call4Leg=173, state=7, substate=37
Mar 26 11:45:51.098: send DCN_PACKET
Mar 26 11:45:51.098: t30 call4Leg=173, state=0, substate=0
Mar 26 11:45:51.098: terminating with hang-up status: 0 
vdtl-5350-8a#

Informações Relacionadas

Este documento lhe foi útil?

FeedbackFeedback

Contate a Cisco

Este documento se refere a estes produtos