使用备份接口的 BRI ISDN 备份

下载选项

  • PDF     (304.4 KB)
    在各种设备上使用 Adobe Reader 查看
  • ePub     (88.9 KB)
    在 iPhone、iPad、Android、Sony Reader 或 Windows Phone 上使用各种应用查看
  • Mobi (Kindle)     (105.7 KB)
    在 Kindle 设备上查看或在多个设备上使用 Kindle 应用查看
已更新: 2010 年 2 月 4 日
文档 ID:11047

非歧视性语言

此产品的文档集力求使用非歧视性语言。在本文档集中，非歧视性语言是指不隐含针对年龄、残障、性别、种族身份、族群身份、性取向、社会经济地位和交叉性的歧视的语言。由于产品软件的用户界面中使用的硬编码语言、基于 RFP 文档使用的语言或引用的第三方产品使用的语言，文档中可能无法确保完全使用非歧视性语言。 深入了解思科如何使用包容性语言。

关于此翻译

思科采用人工翻译与机器翻译相结合的方式将此文档翻译成不同语言，希望全球的用户都能通过各自的语言得到支持性的内容。 请注意：即使是最好的机器翻译，其准确度也不及专业翻译人员的水平。 Cisco Systems, Inc. 对于翻译的准确性不承担任何责任，并建议您总是参考英文原始文档（已提供链接）。

简介

本文为ISDN备份提供了配置示例，同时提供了关于这类配置基本的故障排除信息。

要获得关于最常见的ISDN备份的实施的信息，以及它们之间的比较，请参见以下文件：Backup Interface、浮动静态路由和拨号程序监视DDR备份。

先决条件

要求

本文档没有任何特定的前提条件。

使用的组件

本文档中的信息基于以下软件和硬件版本。

  • 运行Cisco IOS®软件版本12.2(3)和12.2(5)的两个Cisco 2500路由器(帧中继数据终端设备[DTEs])。

  • 作为帧中继交换机的Cisco 4500一个路由器。

本文档中的信息都是基于特定实验室环境中的设备创建的。本文档中使用的所有设备最初均采用原始（默认）配置。如果您是在真实网络上操作，请确保您在使用任何命令前已经了解其潜在影响。

规则

有关文档规则的详细信息，请参阅 Cisco 技术提示规则。

配置

本部分提供有关如何配置本文档所述功能的信息。

注：要查找有关本文档中使用的命令的其他信息，请使用命令查找工具(仅注册客户)。

网络图

本文档使用下图所示的网络设置。

bri_isdn_11047.gif

配置

本文档使用如下所示的配置。

krimson (Cisco 2500 路由器) 
krimson#show running-config
Building configuration...

!
version 12.2
service timestamps debug datetime msec
service timestamps log datetime msec
         
!
hostname krimson
!
!
username kevin password 0 <password> !
isdn switch-type basic-net3
!
!
interface Loopback0
ip address 10.7.7.1 255.255.255.0
ip ospf network point-to-point
!
interface Ethernet0
ip address 10.200.16.30 255.255.255.0
!
interface Serial1
bandwidth 64
no ip address
encapsulation frame-relay
no ip route-cache
no ip mroute-cache
!
interface Serial1.1 point-to-point
backup interface Dialer0
ip address 10.5.5.2 255.255.255.0
no ip route-cache
frame-relay interface-dlci 20 
!
interface BRI0
description Testanschluss ISDN(intern), Nr. 4420038
no ip address
encapsulation ppp
no ip route-cache
no ip mroute-cache
load-interval 30
no keepalive
dialer pool-member 1
isdn switch-type basic-net3
no fair-queue
no cdp enable
ppp authentication chap
!
interface Dialer0
ip address 10.9.9.1 255.255.255.0
encapsulation ppp
no ip route-cache
no ip mroute-cache
dialer pool 1
dialer remote-name kevin
dialer string 6120
dialer-group 1
no cdp enable
ppp authentication chap
!
router ospf 10
log-adjacency-changes
network 10.5.5.0 0.0.0.255 area 0
network 10.7.7.0 0.0.0.255 area 0
network 10.9.9.0 0.0.0.255 area 0
!
ip default-gateway 10.200.16.1
no ip classless
no ip http server
!
access-list 105 permit ip any host 10.7.7.1
access-list 105 permit ip any host 10.8.8.1
access-list 105 permit ip any any
dialer-list 1 protocol ip permit
!
line con 0
exec-timeout 0 0
privilege level 15
line aux 0
transport input all
line vty 0 4
exec-timeout 0 0
password <password> login
!
end

kevin（Cisco 2500 路由器） 
kevin#show running-config
Building configuration...

version 12.2
service timestamps debug datetime msec
service timestamps log datetime msec
!
hostname kevin
!
!
username krimson password 0 <password> !
isdn switch-type basic-net3
!
!
interface Loopback0
ip address 10.8.8.1 255.255.255.0
ip ospf network point-to-point
!
interface Loopback1
ip address 172.19.0.1 255.255.255.255
!
interface Ethernet0
ip address 10.200.16.26 255.255.255.0
!
interface Serial0
no ip address
encapsulation frame-relay
!
interface Serial0.1 point-to-point
ip address 10.5.5.1 255.255.255.0
no cdp enable
frame-relay interface-dlci 20 
!
interface BRI0
no ip address
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-net3
no cdp enable
ppp authentication chap
!
interface Dialer0
ip address 10.9.9.2 255.255.255.0
encapsulation ppp
dialer pool 1
dialer remote-name krimson
dialer-group 1
no cdp enable
ppp authentication chap
!
router ospf 10
log-adjacency-changes
network 10.5.5.0 0.0.0.255 area 0
network 10.8.8.0 0.0.0.255 area 0
network 10.9.9.0 0.0.0.255 area 0
!
ip default-gateway 10.200.16.1
ip classless
!
dialer-list 1 protocol ip permit
no cdp run
!        
line con 0        
exec-timeout 0 0
line aux 0
modem InOut
line vty 0 4
exec-timeout 0 0
password <password> login
!
ntp clock-period 17180102
ntp server 10.200.20.134
end

验证

本部分所提供的信息可用于确认您的配置是否正常工作。

使用以下命令验证配置：

输出解释器工具支持某些 show 命令（只限于注册用户），通过它可以查看 show 命令输出的分析。

  • show interfaces serial -显示关于组播数据链路连接标识符(DLCI)、接口上使用的DLCI、用于本地管理接口(LMI)的DLCI的信息。

  • show interface dialer - 显示有关拨号程序接口的信息。

  • show ip route - 显示IP 路由表条目。 

   krimson#show interface serial 1.1 

 ! --- The initial state before the simulated Frame Relay network failure. ! --- The primary link is up and functional. 

   
   Serial1.1 is up, line protocol is up 
   Hardware is HD64570
   Internet address is 10.5.5.2/24
   Backup interface Dialer0, failure delay 0 sec, 
   secondary disable delay 0 sec
   MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec, 
   reliability 255/255, txload 1/255, rxload 1/255
   Encapsulation FRAME-RELAY
   
   krimson#show int dialer 0 

 ! --- Initial state. The backup interface is in standby mode and inactive.

   Dialer0 is standby mode (spoofing), line protocol is down (spoofing)
   Hardware is Unknown
   Internet address is 10.9.9.1/24
   MTU 1500 bytes, BW 56 Kbit, DLY 20000 usec, 
   reliability 255/255, txload 1/255, rxload 1/255
   Encapsulation PPP, loopback not set
   DTR is pulsed for 1 seconds on reset
   Last input 1w6d, output never, output hang never
   Last clearing of "show interface" counters 6w4d
   Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
   Queueing strategy: weighted fair
   Output queue: 0/1000/64/0 (size/max total/threshold/drops) 
   Conversations 0/1/16 (active/max active/max total)
   Reserved Conversations 0/0 (allocated/max allocated)
   Available Bandwidth 42 kilobits/sec
   5 minute input rate 0 bits/sec, 0 packets/sec
   5 minute output rate 0 bits/sec, 0 packets/sec
   596 packets input, 48924 bytes
   600 packets output, 49280 bytes
   
   krimson#show ip route
   Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
   D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
   N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
   E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
   i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
   * - candidate default, U - per-user static route, o - ODR
   P - periodic downloaded static route
   
   Gateway of last resort is 10.200.16.1 to network 0.0.0.0
   
   192.168.64.0/30 is subnetted, 1 subnets
   C 192.168.64.0 is directly connected, Dialer4
   10.0.0.0/24 is subnetted, 6 subnets
   O 10.9.9.0 [110/3347] via 10.5.5.1, 00:03:34, Serial1.1
   O 10.8.8.0 [110/1563] via 10.5.5.1, 00:03:34, Serial1.1 

 ! --- The route to the tested destination network points to the ! --- still-active primary link.

   
   C 10.5.5.0 is directly connected, Serial1.1
   C 10.7.7.0 is directly connected, Loopback0
   C 10.9.8.0 is directly connected, Dialer1
   C 10.200.16.0 is directly connected, Ethernet0
   S* 0.0.0.0/0 [1/0] via 10.200.16.1

此处，我们可以看到帧中继接口关闭。

   krimson#
   *Apr 16 23:56:47.840: %LINK-3-UPDOWN: Interface Serial1, 
   changed state to down
   *Apr 16 23:56:47.848: OSPF: Interface Serial1.1 going Down 

 ! --- Here we have simulated a failure within the Frame Relay network. ! --- We can see what was conducted to the Frame Relay DTE router, ! --- and the subinterface going down.

   *Apr 16 23:56:47.852: %OSPF-5-ADJCHG: Process 10, 
   Nbr 172.19.0.1 on Serial1.1    
   from FULL to DOWN, Neighbor Down: Interface down or detached
   *Apr 16 23:56:48.736: BACKUP(Serial1.1): event = primary went down
   *Apr 16 23:56:48.740: BACKUP(Serial1.1): changed state to 
   "waiting to backup"
   *Apr 16 23:56:48.744: BACKUP(Serial1.1): event = timer expired
   *Apr 16 23:56:48.748: Di0 DDR is shutdown, could not clear interface.
   *Apr 16 23:56:48.752: BACKUP(Serial1.1): 
   secondary interface (Dialer0) made active 

 ! --- The configured backup interface is active.

   *Apr 16 23:56:48.752: BACKUP(Serial1.1): changed state to "backup mode"
   *Apr 16 23:56:48.756: OSPF: Interface Dialer0 going Up
   *Apr 16 23:56:48.760: BR0 DDR: rotor dialout [priority]
   *Apr 16 23:56:48.764: BR0 DDR: Dialing cause ip (s=10.9.9.1, d=224.0.0.5) 

 ! --- OSPF packets trigger the call.

   *Apr 16 23:56:48.768: BR0 DDR: Attempting to dial 6120
   *Apr 16 23:56:48.784: ISDN BR0: TX -> SETUP pd = 8 callref = 0x3E
   *Apr 16 23:56:48.792: Bearer Capability i = 0x8890
   *Apr 16 23:56:48.796: Channel ID i = 0x83
   *Apr 16 23:56:48.804: Called Party Number i = 0x80, '6120', 
   Plan:Unknown, Type:Unknown
   *Apr 16 23:56:48.844: %LINEPROTO-5-UPDOWN: Line protocol on  
   Interface Serial1, changed state to down
   *Apr 16 23:56:48.884: ISDN BR0: RX <- CALL_PROC pd = 8 callref = 0xBE
   *Apr 16 23:56:48.892: Channel ID i = 0x89
   *Apr 16 23:56:49.144: ISDN BR0: RX <- CONNECT pd = 8 callref = 0xBE
   *Apr 16 23:56:49.160: %LINK-3-UPDOWN: Interface BRI0:1, 
   changed state to up
   *Apr 16 23:56:49.168: %DIALER-6-BIND: 
   Interface BR0:1 bound to profile Di0
   *Apr 16 23:56:49.176: BR0:1 PPP: Treating connection as a callout
   *Apr 16 23:56:49.180: BR0:1 PPP: Phase is ESTABLISHING, Active Open 
   [0 sess, 0 load]
   *Apr 16 23:56:49.184: BR0:1 LCP: O CONFREQ [Closed] id 49 len 15
   *Apr 16 23:56:49.188: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
   *Apr 16 23:56:49.188: BR0:1 LCP: MagicNumber 0xF2143EDB (0x0506F2143EDB)
   *Apr 16 23:56:49.196: ISDN BR0: TX -> CONNECT_ACK pd = 8 callref = 0x3E
   *Apr 16 23:56:49.224: BR0:1 LCP: I CONFREQ [REQsent] id 83 len 15
   *Apr 16 23:56:49.228: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
   *Apr 16 23:56:49.232: BR0:1 LCP: MagicNumber 0x9ADACD69 (0x05069ADACD69)
   *Apr 16 23:56:49.236: BR0:1 LCP: O CONFACK [REQsent] id 83 len 15
   *Apr 16 23:56:49.236: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
   *Apr 16 23:56:49.240: BR0:1 LCP: MagicNumber 0x9ADACD69 (0x05069ADACD69)
   *Apr 16 23:56:49.244: BR0:1 LCP: I CONFACK [ACKsent] id 49 len 15
   *Apr 16 23:56:49.248: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
   *Apr 16 23:56:49.252: BR0:1 LCP: MagicNumber 0xF2143EDB (0x0506F2143EDB)
   *Apr 16 23:56:49.252: BR0:1 LCP: State is Open
   *Apr 16 23:56:49.256: BR0:1 PPP: Phase is AUTHENTICATING, by both 
   [0 sess, 0 load]
   *Apr 16 23:56:49.260: BR0:1 CHAP: O CHALLENGE id 49 len 28 from "krimson"
   *Apr 16 23:56:49.276: BR0:1 CHAP: I CHALLENGE id 51 len 26 from "kevin"
   *Apr 16 23:56:49.284: BR0:1 CHAP: O RESPONSE id 51 len 28 from "krimson"
   *Apr 16 23:56:49.332: BR0:1 CHAP: I SUCCESS id 51 len 4
   *Apr 16 23:56:49.344: BR0:1 CHAP: I RESPONSE id 49 len 26 from "kevin"
   *Apr 16 23:56:49.352: BR0:1 CHAP: O SUCCESS id 49 len 4
   *Apr 16 23:56:49.356: BR0:1 PPP: Phase is UP [0 sess, 0 load]
   *Apr 16 23:56:49.360: BR0:1 IPCP: O CONFREQ [Not negotiated] id 41 len 10
   *Apr 16 23:56:49.364: BR0:1 IPCP: Address 10.9.9.1 (0x03060A090901)
   *Apr 16 23:56:49.376: BR0:1 IPCP: I CONFREQ [REQsent] id 29 len 10
   *Apr 16 23:56:49.380: BR0:1 IPCP: Address 10.9.9.2 (0x03060A090902)
   *Apr 16 23:56:49.384: BR0:1 IPCP: O CONFACK [REQsent] id 29 len 10
   *Apr 16 23:56:49.388: BR0:1 IPCP: Address 10.9.9.2 (0x03060A090902)
   *Apr 16 23:56:49.396: BR0:1 IPCP: I CONFACK [ACKsent] id 41 len 10
   *Apr 16 23:56:49.400: BR0:1 IPCP: Address 10.9.9.1 (0x03060A090901)
   *Apr 16 23:56:49.400: BR0:1 IPCP: State is Open
   *Apr 16 23:56:49.408: BR0:1 DDR: dialer protocol up
   *Apr 16 23:56:49.416: Di0 IPCP: Install route to 10.9.9.2
   *Apr 16 23:56:49.960: OSPF: Rcv hello from 172.19.0.1 area 0 from 
   Dialer0 10.9.9.2
   *Apr 16 23:56:49.964: OSPF: End of hello processing
   *Apr 16 23:56:50.356: %LINEPROTO-5-UPDOWN: 
   Line protocol on Interface BRI0:1, changed state to up
   *Apr 16 23:56:50.748: %LINK-3-UPDOWN: Interface Dialer0, 
   changed state to up
   *Apr 16 23:56:50.752: Di0 LCP: Not allowed on a Dialer Profile
   *Apr 16 23:56:50.752: BACKUP(Dialer0): event = primary came up
   *Apr 16 23:56:55.176: %ISDN-6-CONNECT: 
   Interface BRI0:1 is now connected to 6120 kevin
   *Apr 16 23:56:58.804: OSPF: Rcv DBD from 172.19.0.1 on Dialer0 
   seq 0x988 opt 0x42 flag 0x7 len 32 mtu 1500 state INIT
   *Apr 16 23:56:58.808: OSPF: 2 Way Communication to 172.19.0.1 
   on Dialer0, state 2WAY
   
   krimson#show interface serial 1.1
   Serial1.1 is down, line protocol is down 
   
! --- The primary link is down.

   Hardware is HD64570
   Internet address is 10.5.5.2/24
   Backup interface Dialer0, failure delay 0 sec, 
   secondary disable delay 0 sec
   MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec, 
   reliability 255/255, txload 1/255, rxload 1/255
   Encapsulation FRAME-RELAY
   
   krimson#show interface dialer 0
   Dialer0 is up, line protocol is up (spoofing) 

 ! --- The backup interface is active and bearing traffic.

   Hardware is Unknown
   Internet address is 10.9.9.1/24
   MTU 1500 bytes, BW 56 Kbit, DLY 20000 usec, 
   reliability 255/255, txload 1/255, rxload 1/255
   Encapsulation PPP, loopback not set
   DTR is pulsed for 1 seconds on reset
   Interface is bound to BR0:1
   Last input 1w6d, output never, output hang never
   Last clearing of "show interface" counters 6w4d
   Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
   Queueing strategy: weighted fair
   Output queue: 0/1000/64/0 (size/max total/threshold/drops) 
   Conversations 0/1/16 (active/max active/max total)
   Reserved Conversations 0/0 (allocated/max allocated)
   Available Bandwidth 42 kilobits/sec
   5 minute input rate 0 bits/sec, 0 packets/sec
   5 minute output rate 0 bits/sec, 0 packets/sec
   614 packets input, 50240 bytes
   618 packets output, 50584 bytes
   Bound to:
   BRI0:1 is up, line protocol is up 
   Hardware is BRI
   MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec, 
   reliability 255/255, txload 1/255, rxload 1/255
   Encapsulation PPP, loopback not set
   Keepalive not set
   DTR is pulsed for 1 seconds on reset
   Time to interface disconnect: idle 00:01:57
   Interface is bound to Di0 (Encapsulation PPP)
   LCP Open
   Open: IPCP
   Last input 00:00:01, output 00:00:02, output hang never
   Last clearing of "show interface" counters never
   Queueing strategy: fifo
   Output queue 0/40, 0 drops; input queue 0/75, 0 drops
   30 second input rate 0 bits/sec, 0 packets/sec
   30 second output rate 0 bits/sec, 0 packets/sec
   3910 packets input, 394443 bytes, 0 no buffer
   Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
   29 input errors, 18 CRC, 0 frame, 0 overrun, 0 ignored, 11 abort
   3613 packets output, 222417 bytes, 0 underruns
   0 output errors, 0 collisions, 27 interface resets
   0 output buffer failures, 0 output buffers swapped out
   607 carrier transitions
   
   krimson#show ip route
   Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
   D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
   N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
   E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
   i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
   * - candidate default, U - per-user static route, o - ODR
   P - periodic downloaded static route

Gateway of last resort is 10.200.16.1 to network 0.0.0.0
 
192.168.64.0/30 is subnetted, 1 subnets
   C 192.168.64.0 is directly connected, Dialer4
   10.0.0.0/8 is variably subnetted, 6 subnets, 2 masks
   C 10.9.9.2/32 is directly connected, Dialer0
   O 10.8.8.0/24 [110/1786] via 10.9.9.2, 00:00:53, Dialer0 
   
! --- The route entry to the destination network is now pointing to ! --- the backup interface as a next hop.

   C 10.9.9.0/24 is directly connected, Dialer0
   C 10.7.7.0/24 is directly connected, Loopback0
   C 10.9.8.0/24 is directly connected, Dialer1
   C 10.200.16.0/24 is directly connected, Ethernet0
   S* 0.0.0.0/0 [1/0] via 10.200.16.1
   
   krimson#ping 10.8.8.1
   Type escape sequence to abort.
   Sending 5, 100-byte ICMP Echos to 10.8.8.1, timeout is 2 seconds:
   !!!!!
   Success rate is 100 percent (5/5), round-trip min/avg/max = 36/36/40 ms

一旦帧中继网络的故障被排除，我们在这里可以看到系统重新回到初始状态。

krimson#show interface serial 1.1
   Serial1.1 is up, line protocol is up 
   Hardware is HD64570
   Internet address is 10.5.5.2/24
   Backup interface Dialer0, failure delay 0 sec, 
   secondary disable delay 0 sec
   MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec, 
   reliability 255/255, txload 1/255, rxload 1/255
   Encapsulation FRAME-RELAY
   
   krimson#show interface dialer 0
   Dialer0 is standby mode (spoofing), line protocol is down (spoofing)
   Hardware is Unknown
   Internet address is 10.9.9.1/24
   MTU 1500 bytes, BW 56 Kbit, DLY 20000 usec, 
   reliability 255/255, txload 1/255, rxload 1/255
   Encapsulation PPP, loopback not set
   DTR is pulsed for 1 seconds on reset
   Last input 1w6d, output never, output hang never
   Last clearing of "show interface" counters 6w5d
   Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
   Queueing strategy: weighted fair
   Output queue: 0/1000/64/0 (size/max total/threshold/drops) 
   Conversations 0/1/16 (active/max active/max total)
   Reserved Conversations 0/0 (allocated/max allocated)
   Available Bandwidth 42 kilobits/sec
   5 minute input rate 0 bits/sec, 0 packets/sec
   5 minute output rate 0 bits/sec, 0 packets/sec
   665 packets input, 54008 bytes
   671 packets output, 54548 bytes
   
   krimson#show ip route
   Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
   D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
   N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
   E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
   i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
   * - candidate default, U - per-user static route, o - ODR
   P - periodic downloaded static route
   Gateway of last resort is 10.200.16.1 to network 0.0.0.0
   192.168.64.0/30 is subnetted, 1 subnets
   C 192.168.64.0 is directly connected, Dialer4
   10.0.0.0/24 is subnetted, 6 subnets
   O 10.9.9.0 [110/3347] via 10.5.5.1, 00:08:39, Serial1.1
   O 10.8.8.0 [110/1563] via 10.5.5.1, 00:08:39, Serial1.1
   C 10.5.5.0 is directly connected, Serial1.1
   C 10.7.7.0 is directly connected, Loopback0
   C 10.9.8.0 is directly connected, Dialer1
   C 10.200.16.0 is directly connected, Ethernet0
   S* 0.0.0.0/0 [1/0] via 10.200.16.1
   krimson#

注意：被叫端无需特定配置。

正常操作期间记录的相同show输出包含以下信息：

kevin#show interface serial 0.1
   Serial0.1 is up, line protocol is up 

 ! --- The primary interface is up and running.

   Hardware is HD64570
   Internet address is 10.5.5.1/24
   MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, 
   reliability 255/255, txload 1/255, rxload 1/255
   Encapsulation FRAME-RELAY
   
   kevin#show interface dialer 0
   Dialer0 is up (spoofing), line protocol is up (spoofing) 

 ! --- Note: On the called side, the dialer interface is active ! --- and not in standby mode.

   Hardware is Unknown
   Internet address is 10.9.9.2/24
   MTU 1500 bytes, BW 56 Kbit, DLY 20000 usec, 
   reliability 255/255, txload 1/255, rxload 1/255
   Encapsulation PPP, loopback not set
   DTR is pulsed for 1 seconds on reset
   Last input 1w6d, output never, output hang never
   Last clearing of "show interface" counters 4w2d
   Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
   Queueing strategy: weighted fair
   Output queue: 0/1000/64/0 (size/max total/threshold/drops) 
   Conversations 0/1/16 (active/max active/max total)
   Reserved Conversations 0/0 (allocated/max allocated)
   Available Bandwidth 42 kilobits/sec
   5 minute input rate 0 bits/sec, 0 packets/sec
   5 minute output rate 0 bits/sec, 0 packets/sec
   598 packets input, 49252 bytes
   596 packets output, 48924 bytes

   kevin#show ip route
   Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
   D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
   N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
   E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
   i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
   * - candidate default, U - per-user static route, o - ODR
   P - periodic downloaded static route
   
   Gateway of last resort is 10.200.16.1 to network 0.0.0.0
   
   172.17.0.0/32 is subnetted, 1 subnets
   S 172.17.247.195 [1/0] via 10.200.16.1
   172.19.0.0/32 is subnetted, 1 subnets
   C 172.19.0.1 is directly connected, Loopback1
   10.0.0.0/24 is subnetted, 5 subnets
   C 10.5.5.0 is directly connected, Serial0.1
   O 10.7.7.0 [110/65] via 10.5.5.2, 00:04:27, Serial0.1
   C 10.9.9.0 is directly connected, Dialer0
   C 10.8.8.0 is directly connected, Loopback0
   C 10.200.16.0 is directly connected, Ethernet0
   S* 0.0.0.0/0 [1/0] via 10.200.16.1

以下是故障期间记录的相同信息： 

kevin#show interface serial 0.1
   Serial0.1 is down, line protocol is down 
   Hardware is HD64570
   Internet address is 10.5.5.1/24
   MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, 
   reliability 255/255, txload 1/255, rxload 1/255
   Encapsulation FRAME-RELAY
   
   kevin#show interface dialer 0
   Dialer0 is up, line protocol is up (spoofing)
   Hardware is Unknown
   Internet address is 10.9.9.2/24
   MTU 1500 bytes, BW 56 Kbit, DLY 20000 usec, 
   reliability 255/255, txload 1/255, rxload 1/255
   Encapsulation PPP, loopback not set
   DTR is pulsed for 1 seconds on reset
   Interface is bound to BR0:1
   Last input 1w6d, output never, output hang never
   Last clearing of "show interface" counters 4w2d
   Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
   Queueing strategy: weighted fair
   Output queue: 0/1000/64/0 (size/max total/threshold/drops) 
   Conversations 0/1/16 (active/max active/max total)
   Reserved Conversations 0/0 (allocated/max allocated)
   Available Bandwidth 42 kilobits/sec
   5 minute input rate 0 bits/sec, 0 packets/sec
   5 minute output rate 0 bits/sec, 0 packets/sec
   618 packets input, 50700 bytes
   616 packets output, 50384 bytes
   Bound to:
   BRI0:1 is up, line protocol is up 
   Hardware is BRI
   MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec, 
   reliability 255/255, txload 1/255, rxload 1/255
   Encapsulation PPP, loopback not set
   Keepalive set (10 sec)
   DTR is pulsed for 1 seconds on reset
   Time to interface disconnect: idle 00:01:57
   Interface is bound to Di0 (Encapsulation PPP)
   LCP Open
   Open: IPCP
   Last input 00:00:03, output 00:00:02, output hang never
   Last clearing of "show interface" counters never
   Queueing strategy: fifo
   Output queue 0/40, 0 drops; input queue 0/75, 0 drops
   5 minute input rate 0 bits/sec, 0 packets/sec
   5 minute output rate 0 bits/sec, 0 packets/sec
   1280 packets input, 138077 bytes, 0 no buffer
   Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
   9789 input errors, 9789 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
   1309 packets output, 138487 bytes, 0 underruns
   0 output errors, 0 collisions, 15 interface resets
   0 output buffer failures, 0 output buffers swapped out
   351 carrier transitions
   
   kevin#show ip route
   Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
   D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
   N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
   E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
   i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
   * - candidate default, U - per-user static route, o - ODR
   P - periodic downloaded static route
   Gateway of last resort is 10.200.16.1 to network 0.0.0.0
   172.17.0.0/32 is subnetted, 1 subnets
   S 172.17.247.195 [1/0] via 10.200.16.1
   172.19.0.0/32 is subnetted, 1 subnets
   C 172.19.0.1 is directly connected, Loopback1
   10.0.0.0/8 is variably subnetted, 5 subnets, 2 masks
   O 10.7.7.0/24 [110/1786] via 10.9.9.1, 00:01:21, Dialer0
   C 10.9.9.0/24 is directly connected, Dialer0
   C 10.8.8.0/24 is directly connected, Loopback0
   C 10.9.9.1/32 is directly connected, Dialer0
   C 10.200.16.0/24 is directly connected, Ethernet0
   S* 0.0.0.0/0 [1/0] via 10.200.16.1

故障排除

本部分提供的信息可用于对配置进行故障排除。

带点到点子接口和此处将开放式最短路径优先（OSPF）用作路由协议的帧中继配置是为该设置特别规定的。然而，显示的故障检修步骤更加通用，并且适用于不同配置，例如帧中继单点对多点、带有高级数据链路控制（HDLC）的主链路、或点对点协议(PPP)封装，无论它们使用哪种路由协议。

要验证备份功能，作为帧中继交换机的Cisco 4500路由器上的一个接口处于关闭状态，以模拟帧中继网络中的问题。因此，这会导致PVC非活动状态通过帧中继网络传导到DTE路由器上，帧中继子接口中断事件。这将激活备份接口。

故障排除命令

注意：在发出debug命令之前，请参阅有关Debug命令的重要信息。

  • debug isdn q931

  • debug backup — 调试备份事件。

  • debug dialer - 显示拨号程序接口上数据包或事件的相关调试信息。

  • debug ppp negotiation - 导致debug ppp命令显示PPP启动期间传输的PPP信息包，其中PPP选项需要协商。

  • debug ppp authentication - 致使debug ppp命令显示认证协议消息，包括质询验证协议 (CHAP)信息包交换和密码验证协议(PAP)交换。

  • debug ip ospf events - 显示有关 OSPF 相关事件的信息，例如邻接、泛洪信息、指定的路由器选择和 Shortest Path First (SPF) 计算

  • debug frame-relay events -在支持组播信道和使用动态寻址的网络上显示有关帧中继ARP应答的调试信息。

相关信息

修订历史记录

版本 发布日期 备注
1.0
04-Feb-2010
初始版本

此文档是否有帮助?

Feedback反馈

联系我们

本文档适用于以下产品