用浮动静态路由配置 ISDN 备份

下载选项

  • PDF     (265.4 KB)
    在各种设备上使用 Adobe Reader 查看
  • ePub     (90.5 KB)
    在 iPhone、iPad、Android、Sony Reader 或 Windows Phone 上使用各种应用查看
  • Mobi (Kindle)     (103.1 KB)
    在 Kindle 设备上查看或在多个设备上使用 Kindle 应用查看
已更新: 2010 年 2 月 4 日
文档 ID:12497

非歧视性语言

此产品的文档集力求使用非歧视性语言。在本文档集中，非歧视性语言是指不隐含针对年龄、残障、性别、种族身份、族群身份、性取向、社会经济地位和交叉性的歧视的语言。由于产品软件的用户界面中使用的硬编码语言、基于 RFP 文档使用的语言或引用的第三方产品使用的语言，文档中可能无法确保完全使用非歧视性语言。 深入了解思科如何使用包容性语言。

关于此翻译

思科采用人工翻译与机器翻译相结合的方式将此文档翻译成不同语言，希望全球的用户都能通过各自的语言得到支持性的内容。 请注意：即使是最好的机器翻译，其准确度也不及专业翻译人员的水平。 Cisco Systems, Inc. 对于翻译的准确性不承担任何责任，并建议您总是参考英文原始文档（已提供链接）。

简介

本文档为使用浮动静态路由实现 ISDN 备份提供了配置示例，并为这类配置提供基本的故障排除信息。

要获得关于最常见的ISDN备份的实施的信息，以及它们之间的比较，请参见以下文件：Backup Interface、浮动静态路由和拨号程序监视DDR备份。

先决条件

要求

本文档没有任何特定的要求。

使用的组件

本文档中的信息基于以下软件和硬件版本。

  • 运行 Cisco IOS® 软件版本 12.2(3) 和 12.2(5) 的两个 Cisco 2500 路由器

本文档中的信息都是基于特定实验室环境中的设备创建的。本文档中使用的所有设备最初均采用原始（默认）配置。如果您是在真实网络上操作，请确保您在使用任何命令前已经了解其潜在影响。

规则

有关文档规则的详细信息，请参阅 Cisco 技术提示规则。

配置

本部分提供有关如何配置本文档所述功能的信息。

注：要查找有关本文档中使用的命令的其他信息，请使用命令查找工具(仅注册客户)。

网络图

本文档使用下图所示的网络设置。

diagram.gif

配置

本文档使用如下所示的配置。

krimson (Cisco 2500 路由器) 
krimson#show running-config
 Building configuration...

 !
 version 12.2
 service timestamps debug datetime msec
 service timestamps log datetime msec
 !
 hostname krimson
 !
 username kevin password 0 <password>
 !
 isdn switch-type basic-net3
 !
 !
 interface Loopback0
 ip address 10.7.7.1 255.255.255.0
 !
 interface Serial0
 ip address 10.1.2.1 255.255.255.0
 !
 interface BRI0
 no ip address
 encapsulation ppp
 no ip route-cache
 no ip mroute-cache
 load-interval 30
 dialer pool-member 1
 isdn switch-type basic-net3
 no fair-queue
 no cdp enable
 ppp authentication chap
 !
 interface Dialer0
 ip address 10.9.9.1 255.255.255.0
 encapsulation ppp
 no ip route-cache
 no ip mroute-cache
 dialer pool 1
 dialer remote-name kevin


 dialer string 8114
 dialer-group 1
 no cdp enable
 ppp authentication chap
 !
 ip classless
 ip route 10.8.8.0 255.255.255.0 10.1.2.2
 ip route 10.8.8.0 255.255.255.0 10.9.9.2 180
 no ip http server
 !
 dialer-list 1 protocol ip permit
 !
 !
 line con 0
 exec-timeout 0 0
 line aux 0
 line vty 0 4
 exec-timeout 0 0
 password <password> login
 !
 end

kevin（Cisco 2500 路由器） 
kevin#show running-config
 Building configuration...

 Current configuration : 1205 bytes
 !
 version 12.2
 service timestamps debug datetime msec
 service timestamps log datetime msec
 no service password-encryption
 !
 hostname kevin
 !
 username krimson password 0 <password>
 !
 isdn switch-type basic-net3
 !
 !
 !
 interface Loopback0
 ip address 10.8.8.1 255.255.255.0
 !
 interface Serial0
 ip address 10.1.2.2 255.255.255.0
 clockrate 2000000
 !
 interface Serial1
 no ip address
 shutdown
 !
 interface BRI0
 no ip address
 encapsulation ppp
 dialer pool-member 1
 isdn switch-type basic-net3
 no cdp enable
 ppp authentication chap
 !
 interface Dialer0
 ip address 10.9.9.2 255.255.255.0
 encapsulation ppp
 dialer pool 1
 dialer remote-name krimson
 dialer string 8113
 dialer-group 1
 no cdp enable
 ppp authentication chap
 !
 !
 dialer-list 1 protocol ip permit
 !
 !
 line con 0
 exec-timeout 0 0
 line aux 0
 line vty 0 4
 exec-timeout 0 0
 password <password> login
 !
 end

验证

本部分所提供的信息可用于确认您的配置是否正常工作。

命令输出解释程序工具（仅限注册用户）支持某些 show 命令，使用此工具可以查看对 show 命令输出的分析。

  • show ip route - 显示IP 路由表条目。

  • show interfaces - 显示在路由器或接入服务器上配置的所有接口的统计信息。

故障排除

本部分提供的信息可用于对配置进行故障排除。

故障排除命令

命令输出解释程序工具（仅限注册用户）支持某些 show 命令，使用此工具可以查看对 show 命令输出的分析。

注意：在发出debug命令之前，请参阅有关Debug命令的重要信息。

  • debug isdn q931 - 显示关于呼叫建立及拆线、本地路由器(用户端)和网络之间的ISDN网络连接(第三层)断开的信息。

  • debug isdn events - 显示发生在 ISDN 接口用户端（在路由器上）的 ISDN 事件。这些可以显示的 ISDN 事件是 Q.931 事件（ISDN 网络连接的呼叫建立和断开）。

  • debug dialer - 显示拨号程序接口上数据包或事件的相关调试信息。

  • debug ppp negotiation - 导致debug ppp命令显示PPP启动期间传输的PPP信息包，其中PPP选项需要协商。

  • debug ppp authentication - 致使debug ppp命令显示认证协议消息，包括质询验证协议 (CHAP)信息包交换和密码验证协议(PAP)交换。

故障排除输出示例

在此，我们可以通过在远端的串行接口上使用 shutdown 和 no shutdown 命令来测试备份功能。这会导致相关目标网络中主 IP 路由的消失。

首先让我们看看主接口和 IP 路由表的初始状态：

呼叫端： 

   krimson#show interface serial 0
   Serial0 is up, line protocol is up 
   Hardware is HD64570
   Internet address is 10.1.2.1/24
   MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, 
   reliability 255/255, txload 1/255, rxload 1/255
   Encapsulation HDLC, loopback not set
   Keepalive set (10 sec)
   Last input 00:00:07, output 00:00:07, output hang never
   Last clearing of "show interface" counters never
   Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
   Queueing strategy: weighted fair
   Output queue: 0/1000/64/0 (size/max total/threshold/drops) 
   Conversations 0/1/256 (active/max active/max total)
   Reserved Conversations 0/0 (allocated/max allocated)
   Available Bandwidth 1158 kilobits/sec
   5 minute input rate 1000 bits/sec, 0 packets/sec
   5 minute output rate 0 bits/sec, 0 packets/sec
   92 packets input, 7599 bytes, 0 no buffer
   Received 62 broadcasts, 0 runts, 0 giants, 0 throttles
   0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
   99 packets output, 8991 bytes, 0 underruns
   0 output errors, 0 collisions, 12 interface resets
   0 output buffer failures, 0 output buffers swapped out
   4 carrier transitions
   DCD=up DSR=up DTR=up RTS=up CTS=up
   
   krimson#show ip route
   Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
   D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
   N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
   E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
   i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter
   area
   * - candidate default, U - per-user static route, o - ODR
   P - periodic downloaded static route

   Gateway of last resort is 10.48.74.1 to network 0.0.0.0

   10.0.0.0/8 is variably subnetted, 5 subnets, 2 masks
   C 10.1.2.0/24 is directly connected, Serial0
   S 10.8.8.0/24 [1/0] via 10.1.2.2 
  
 !--- The IP route for the destination network points to the primary link.

   C 10.9.9.0/24 is directly connected, Dialer0
   C 10.7.7.0/24 is directly connected, Loopback0
   C 10.48.74.0/23 is directly connected, Ethernet0
   S* 0.0.0.0/0 [254/0] via 10.48.74.1

被呼叫端： 

   kevin#show interface serial 0
   Serial0 is up, line protocol is up 
   Hardware is HD64570
   Internet address is 10.1.2.2/24
   MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, 
   reliability 255/255, txload 1/255, rxload 1/255
   Encapsulation HDLC, loopback not set
   Keepalive set (10 sec)
   Last input 00:00:00, output 00:00:08, output hang never
   Last clearing of "show interface" counters never
   Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
   Queueing strategy: weighted fair
   Output queue: 0/1000/64/0 (size/max total/threshold/drops) 
   Conversations 0/1/256 (active/max active/max total)
   Reserved Conversations 0/0 (allocated/max allocated)
   Available Bandwidth 1158 kilobits/sec
   5 minute input rate 0 bits/sec, 0 packets/sec
   5 minute output rate 0 bits/sec, 0 packets/sec
   106 packets input, 9432 bytes, 0 no buffer
   Received 71 broadcasts, 0 runts, 0 giants, 0 throttles
   0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
   98 packets output, 8016 bytes, 0 underruns
   0 output errors, 0 collisions, 4 interface resets
   0 output buffer failures, 0 output buffers swapped out
   1 carrier transitions
   DCD=up DSR=up DTR=up RTS=up CTS=up
  
   kevin#show ip route
   Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
   D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
   N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
   E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
   i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter
   area
   * - candidate default, U - per-user static route, o - ODR
   P - periodic downloaded static route

   Gateway of last resort is 10.48.74.1 to network 0.0.0.0

   10.0.0.0/8 is variably subnetted, 4 subnets, 2 masks
   C 10.1.2.0/24 is directly connected, Serial0
   C 10.9.9.0/24 is directly connected, Dialer0
   C 10.8.8.0/24 is directly connected, Loopback0
   C 10.48.74.0/23 is directly connected, Ethernet0
   S* 0.0.0.0/0 [254/0] via 10.48.74.1
   kevin#

现在，我们可以通过在远程串行接口上使用 shutdown 命令来模拟链路故障： 

   krimson#
   *Mar 4 15:25:18.302: %LINK-3-UPDOWN: Interface Serial0, changed state to
   down
   *Mar 4 15:25:19.302: %LINEPROTO-5-UPDOWN: Line protocol on Interface
   Serial0, changed state to down

在此，我们可以看到主链路已经断开。

   krimson#show interface serial 0
   Serial0 is down, line protocol is down 
   Hardware is HD64570
   Internet address is 10.1.2.1/24
   MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, 
   reliability 255/255, txload 1/255, rxload 1/255
   Encapsulation HDLC, loopback not set
   Keepalive set (10 sec)
   Last input 00:00:22, output 00:00:32, output hang never
   Last clearing of "show interface" counters never
   Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
   Queueing strategy: weighted fair
   Output queue: 0/1000/64/0 (size/max total/threshold/drops) 
   Conversations 0/1/256 (active/max active/max total)
   Reserved Conversations 0/0 (allocated/max allocated)
   Available Bandwidth 1158 kilobits/sec
   5 minute input rate 0 bits/sec, 0 packets/sec
   5 minute output rate 0 bits/sec, 0 packets/sec
   108 packets input, 8526 bytes, 0 no buffer
   Received 78 broadcasts, 0 runts, 0 giants, 0 throttles
   0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
   114 packets output, 9895 bytes, 0 underruns
   0 output errors, 0 collisions, 12 interface resets
   0 output buffer failures, 0 output buffers swapped out
   5 carrier transitions
   DCD=down DSR=down DTR=up RTS=up CTS=down
   krimson#

路由表详细信息此时显示路由表中已安装浮动静态路由： 

   krimson#show ip route
   Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
   D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
   N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
   E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
   i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter
   area
   * - candidate default, U - per-user static route, o - ODR
   P - periodic downloaded static route

   Gateway of last resort is 10.48.74.1 to network 0.0.0.0

   10.0.0.0/8 is variably subnetted, 4 subnets, 2 masks
   S 10.8.8.0/24 [180/0] via 10.9.9.2
   C 10.9.9.0/24 is directly connected, Dialer0
   C 10.7.7.0/24 is directly connected, Loopback0
   C 10.48.74.0/23 is directly connected, Ethernet0
   S* 0.0.0.0/0 [254/0] via 10.48.74.1
   krimson#

在被叫路由器上，我们可以通过在本地串行 0 接口上使用 shutdown 命令来模拟主链路故障： 

   kevin#configure terminal
   Enter configuration commands, one per line. End with CNTL/Z.
   kevin(config)#interface serial 0
   kevin(config-if)#shutdown

   *Mar 4 15:32:00.250: %LINK-5-CHANGED: Interface Serial0, changed state to
   administratively down
   *Mar 4 15:32:01.250: %LINEPROTO-5-UPDOWN: Line protocol on Interface
   Serial0, changed state to down
   *Mar 4 15:32:03.742: %SYS-5-CONFIG_I: Configured from console by console

现在，我们可以看到主链路已经断开： 

   kevin#show interface serial 0
   Serial0 is administratively down, line protocol is down 
   Hardware is HD64570
   Internet address is 10.1.2.2/24
   MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, 
   reliability 255/255, txload 1/255, rxload 1/255
   Encapsulation HDLC, loopback not set
   Keepalive set (10 sec)
   Last input 00:01:28, output 00:01:18, output hang never
   Last clearing of "show interface" counters never
   Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
   Queueing strategy: weighted fair
   Output queue: 0/1000/64/0 (size/max total/threshold/drops) 
   Conversations 0/1/256 (active/max active/max total)
   Reserved Conversations 0/0 (allocated/max allocated)
   Available Bandwidth 1158 kilobits/sec
   5 minute input rate 0 bits/sec, 0 packets/sec
   5 minute output rate 0 bits/sec, 0 packets/sec
   114 packets input, 9895 bytes, 0 no buffer
   Received 79 broadcasts, 0 runts, 0 giants, 0 throttles
   0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
   108 packets output, 8526 bytes, 0 underruns
   0 output errors, 0 collisions, 4 interface resets
   0 output buffer failures, 0 output buffers swapped out
   1 carrier transitions
   DCD=down DSR=down DTR=up RTS=up CTS=down

被定义为相关流量的 ping 流量会通过备份拨号程序 0 接口启动呼出呼叫。 

   krimson#ping 10.8.8.1

   Type escape sequence to abort.
   Sending 5, 100-byte ICMP Echos to 10.8.8.1, timeout is 2 seconds:

   *Mar 4 15:27:39.618: BR0 DDR: rotor dialout [priority]
   *Mar 4 15:27:39.622: BR0 DDR: Dialing cause ip (s=10.9.9.1, d=10.8.8.1)
   *Mar 4 15:27:39.626: BR0 DDR: Attempting to dial 8114
   *Mar 4 15:27:39.642: ISDN BR0: TX -> SETUP pd = 8 callref = 0x09
   *Mar 4 15:27:39.646: Bearer Capability i = 0x8890
   *Mar 4 15:27:39.654: Channel ID i = 0x83
   *Mar 4 15:27:39.658: Called Party Number i = 0x80, '8114',
   Plan:Unknown, Type:Unknown
   *Mar 4 15:27:39.718: ISDN BR0: RX <- CALL_PROC pd = 8 callref = 0x89
   *Mar 4 15:27:39.722: Channel ID i = 0x89
   *Mar 4 15:27:39.974: ISDN BR0: RX <- CONNECT pd = 8 callref = 0x89
   *Mar 4 15:27:39.990: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
   *Mar 4 15:27:39.998: %DIALER-6-BIND: Interface BR0:1 bound to profile Di0
   *Mar 4 15:27:40.010: BR0:1 PPP: Treating connection as a callout
   *Mar 4 15:27:40.010: BR0:1 PPP: Phase is ESTABLISHING, Active Open [0 sess, 0 load]
   *Mar 4 15:27:40.014: BR0:1 LCP: O .!!!CONFREQ [Closed] id 19 len 15
   *Mar 4 15:27:40.018: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
   *Mar 4 15:27:40.022: BR0:1 LCP: MagicNumber 0x12D0A490 (0x050612D0A490)
   *Mar 4 15:27:40.030: ISDN BR0: TX -> CONNECT_ACK pd = 8 callref = 0x09
   *Mar 4 15:27:40.054: BR0:1 LCP: I CONFREQ [REQsent] id 9 len 15
   *Mar 4 15:27:40.058: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
   *Mar 4 15:27:40.062: BR0:1 LCP: MagicNumber 0x12D6B638 (0x050612D6B638)
   *Mar 4 15:27:40.066: BR0:1 LCP: O CONFACK [REQsent] id 9 len 15
   *Mar 4 15:27:40.066: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
   *Mar 4 15:27:40.070: BR0:1 LCP: MagicNumber 0x12D6B638 (0x050612D6B638)
   *Mar 4 15:27:40.074: BR0:1 LCP: I CONFACK [ACKsent] id 19 len 15
   *Mar 4 15:27:40.078: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
   *Mar 4 15:27:40.082: BR0:1 LCP: MagicNumber 0x12D0A490 (0x050612D0A490)
   *Mar 4 15:27:40.082: BR0:1 LCP: State is Open
   *Mar 4 15:27:40.086: BR0:1 PPP: Phase is AUTHENTICATING, by both [0 sess, 0 load]
   *Mar 4 !
   Suc15:27:40.090: BR0:1 CHAP: O CHALLENGE id 7 len 28 from "krimson"
   *Mar 4 15:27:40.106: BR0:1 CHAP: I CHALLENGE id 7 len 26 from "kevin"
   *Mar 4 15:27:40.110: BR0:1 CHAP: O RESPONSE id 7 len 28 from "krimson"
   *Mar 4 15:27:40.138: BR0:1 CHAP: I SUCCESS id 7 len 4
   *Mar 4 15:27:40.150: BR0:1 CHAP: I RESPONSE id 7 len 26 from "kevin"
   *Mar 4 15:27:40.158: BR0:1 CHAP: O SUCCESS id 7 len 4
   *Mar 4 15:27:40.162: BR0:1 PPP: Phase is UP [0 sess, 0 load]
   *Mar 4 15:27:40.166: BR0:1 IPCP: O CONFREQ [Not negotiated] id 2 len 10
   *Mar 4 15:27:40.170: BR0:1 IPCP: Address 10.9.9.1 (0x03060A090901)
   *Mar 4 15:27:40.186: BR0:1 IPCP: I CONFREQ [REQsent] id 2 len 10
   *Mar 4 15:27:40.190: BR0:1 IPCP: Address 10.9.9.2 (0x03060A090902)
   *Mar 4 15:27:40.190: BR0:1 IPCP: O CONFACK [REQsent] id 2 len 10
   *Mar 4 15:27:40.194: BR0:1 IPCP: Address 10.9.9.2 (0x03060A090902)
   *Mar 4 15:27:40.202: BR0:1 IPCP: I CONFACK [ACKsent] id 2 len 10
   *Mar 4 15:27:40.206: BR0:1 IPCP: Address 10.9.9.1 (0x03060A090901)
   *Mar 4 15:27:40.206: BR0:1 IPCP: State is Open
   *Mar 4 15:27:40.214: BR0:1 DDR: dialer protocol up
   *Mar 4 15:27:40.218: Di0 IPCP: Install route to 10.9.9.2
   *Mar 4 15:27:41.162: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:1,
   changed state to upcess rate is 80 percent (4/5), round-trip min/avg/max =
   36/47/76 ms
   krimson#

同时，在被呼叫端运行的 debug 会显示此同一呼叫的以下输出： 

   kevin#   
   *Mar 4 15:34:21.698: ISDN BR0: RX <- SETUP pd = 8 callref = 0x07
   *Mar 4 15:34:21.706: Bearer Capability i = 0x8890
   *Mar 4 15:34:21.714: Channel ID i = 0x89
   *Mar 4 15:34:21.718: Calling Party Number i = 0xA1, '8113',
   Plan:ISDN, Type:National
   *Mar 4 15:34:21.734: Called Party Number i = 0xC1, '8114',
   Plan:ISDN, Type:Subscriber(local)
   *Mar 4 15:34:21.762: ISDN BR0: Event: Received a DATA call from 8113 on B1
   at 64 Kb/s
   *Mar 4 15:34:21.762: ISDN BR0: Event: Accepting the call id 0xC
   *Mar 4 15:34:21.766: BR0:1: interface must be fifo queue, force fifo
   *Mar 4 15:34:21.774: %DIALER-6-BIND: Interface BR0:1 bound to profile Di0
   *Mar 4 15:34:21.786: %LINK-3-UPDOWN: Interface BRI0:1, changed state to up
   *Mar 4 15:34:21.798: BR0:1 PPP: Treating connection as a callin
   *Mar 4 15:34:21.802: BR0:1 PPP: Phase is ESTABLISHING, Passive Open [0 sess,
   0 load]
   *Mar 4 15:34:21.806: BR0:1 LCP: State is Listen
   *Mar 4 15:34:21.818: ISDN BR0: TX -> CALL_PROC pd = 8 callref = 0x87
   *Mar 4 15:34:21.826: Channel ID i = 0x89
   *Mar 4 15:34:21.854: ISDN BR0: TX -> CONNECT pd = 8 callref = 0x87
   *Mar 4 15:34:21.918: ISDN BR0: RX <- CONNECT_ACK pd = 8 callref = 0x07
   *Mar 4 15:34:21.926: Channel ID i = 0x89
   *Mar 4 15:34:21.978: BR0:1 LCP: I CONFREQ [Listen] id 19 len 15
   *Mar 4 15:34:21.982: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
   *Mar 4 15:34:21.986: BR0:1 LCP: MagicNumber 0x12D0A490 (0x050612D0A490)
   *Mar 4 15:34:21.990: BR0:1 LCP: O CONFREQ [Listen] id 9 len 15
   *Mar 4 15:34:21.994: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
   *Mar 4 15:34:21.994: BR0:1 LCP: MagicNumber 0x12D6B638 (0x050612D6B638)
   *Mar 4 15:34:21.998: BR0:1 LCP: O CONFACK [Listen] id 19 len 15
   *Mar 4 15:34:22.002: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
   *Mar 4 15:34:22.006: BR0:1 LCP: MagicNumber 0x12D0A490 (0x050612D0A490)
   *Mar 4 15:34:22.030: BR0:1 LCP: I CONFACK [ACKsent] id 9 len 15
   *Mar 4 15:34:22.034: BR0:1 LCP: AuthProto CHAP (0x0305C22305)
   *Mar 4 15:34:22.034: BR0:1 LCP: MagicNumber 0x12D6B638 (0x050612D6B638)
   *Mar 4 15:34:22.038: BR0:1 LCP: State is Open
   *Mar 4 15:34:22.042: BR0:1 PPP: Phase is AUTHENTICATING, by both [0 sess, 0
   load]
   *Mar 4 15:34:22.046: BR0:1 CHAP: O CHALLENGE id 7 len 26 from "kevin"
   *Mar 4 15:34:22.050: BR0:1 CHAP: I CHALLENGE id 7 len 28 from "krimson"
   *Mar 4 15:34:22.054: BR0:1 CHAP: Waiting for peer to authenticate first
   *Mar 4 15:34:22.070: BR0:1 CHAP: I RESPONSE id 7 len 28 from "krimson"
   *Mar 4 15:34:22.078: BR0:1 CHAP: O SUCCESS id 7 len 4
   *Mar 4 15:34:22.082: BR0:1 CHAP: Processing saved Challenge, id 7
   *Mar 4 15:34:22.090: BR0:1 CHAP: O RESPONSE id 7 len 26 from "kevin"
   *Mar 4 15:34:22.114: BR0:1 CHAP: I SUCCESS id 7 len 4
   *Mar 4 15:34:22.118: BR0:1 PPP: Phase is UP [0 sess, 0 load]
   *Mar 4 15:34:22.122: BR0:1 IPCP: O CONFREQ [Not negotiated] id 2 len 10
   *Mar 4 15:34:22.126: BR0:1 IPCP: Address 10.9.9.2 (0x03060A090902)
   *Mar 4 15:34:22.130: BR0:1 IPCP: I CONFREQ [REQsent] id 2 len 10
   *Mar 4 15:34:22.134: BR0:1 IPCP: Address 10.9.9.1 (0x03060A090901)
   *Mar 4 15:34:22.138: BR0:1 IPCP: O CONFACK [REQsent] id 2 len 10
   *Mar 4 15:34:22.142: BR0:1 IPCP: Address 10.9.9.1 (0x03060A090901)
   *Mar 4 15:34:22.226: BR0:1 IPCP: I CONFACK [ACKsent] id 2 len 10
   *Mar 4 15:34:22.230: BR0:1 IPCP: Address 10.9.9.2 (0x03060A090902)
   *Mar 4 15:34:22.230: BR0:1 IPCP: State is Open
   *Mar 4 15:34:22.242: BR0:1 DDR: dialer protocol up
   *Mar 4 15:34:22.250: Di0 IPCP: Install route to 10.9.9.1
   *Mar 4 15:34:23.114: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:1,
   changed state to up
   *Mar 4 15:34:27.794: %ISDN-6-CONNECT: Interface BRI0:1 is now connected to
   8113 krimson

备份之后的状态为“up”：

   krimson#show interface dialer 0
   Dialer0 is up, line protocol is up (spoofing)
   Hardware is Unknown
   Internet address is 10.9.9.1/24
   MTU 1500 bytes, BW 56 Kbit, DLY 20000 usec, 
   reliability 255/255, txload 1/255, rxload 1/255
   Encapsulation PPP, loopback not set
   DTR is pulsed for 1 seconds on reset
   Interface is bound to BR0:1
   Last input never, output never, output hang never
   Last clearing of "show interface" counters 00:13:26
   Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
   Queueing strategy: weighted fair
   Output queue: 0/1000/64/0 (size/max total/threshold/drops) 
   Conversations 0/1/16 (active/max active/max total)
   Reserved Conversations 0/0 (allocated/max allocated)
   Available Bandwidth 42 kilobits/sec
   5 minute input rate 0 bits/sec, 0 packets/sec
   5 minute output rate 0 bits/sec, 0 packets/sec
   36 packets input, 2160 bytes
   36 packets output, 2160 bytes
   Bound to:
   BRI0:1 is up, line protocol is up 
   Hardware is BRI
   MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec, 
   reliability 255/255, txload 1/255, rxload 1/255
   Encapsulation PPP, loopback not set
   Keepalive set (10 sec)
   Time to interface disconnect: idle 00:01:33
   Interface is bound to Di0 (Encapsulation PPP)
   LCP Open
   Open: IPCP
   Last input 00:00:26, output 00:00:01, output hang never
   Last clearing of "show interface" counters never
   Queueing strategy: fifo
   Output queue 0/40, 0 drops; input queue 0/75, 0 drops
   30 second input rate 0 bits/sec, 0 packets/sec
   30 second output rate 0 bits/sec, 0 packets/sec
   126 packets input, 3664 bytes, 0 no buffer
   Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
   0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
   131 packets output, 3777 bytes, 0 underruns
   0 output errors, 0 collisions, 15 interface resets
   0 output buffer failures, 0 output buffers swapped out
   28 carrier transitions

   krimson#show ip route
   Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
   D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
   N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
   E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
   i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter
   area
   * - candidate default, U - per-user static route, o - ODR
   P - periodic downloaded static route

   Gateway of last resort is 10.48.74.1 to network 0.0.0.0

   10.0.0.0/8 is variably subnetted, 5 subnets, 3 masks
   C 10.9.9.2/32 is directly connected, Dialer0
   S 10.8.8.0/24 [180/0] via 10.9.9.2
   C 10.9.9.0/24 is directly connected, Dialer0
   C 10.7.7.0/24 is directly connected, Loopback0
   C 10.48.74.0/23 is directly connected, Ethernet0
   S* 0.0.0.0/0 [254/0] via 10.48.74.1

在被呼叫端：

备份之后的状态为“up”。 

   kevin#show interface dialer 0
   Dialer0 is up, line protocol is up (spoofing)
   Hardware is Unknown
   Internet address is 10.9.9.2/24
   MTU 1500 bytes, BW 56 Kbit, DLY 20000 usec, 
   reliability 255/255, txload 1/255, rxload 1/255
   Encapsulation PPP, loopback not set
   DTR is pulsed for 1 seconds on reset
   Interface is bound to BR0:1
   Last input never, output never, output hang never
   Last clearing of "show interface" counters 00:16:18
   Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
   Queueing strategy: weighted fair
   Output queue: 0/1000/64/0 (size/max total/threshold/drops) 
   Conversations 0/1/16 (active/max active/max total)
   Reserved Conversations 0/0 (allocated/max allocated)
   Available Bandwidth 42 kilobits/sec
   5 minute input rate 0 bits/sec, 0 packets/sec
   5 minute output rate 0 bits/sec, 0 packets/sec
   40 packets input, 2224 bytes
   40 packets output, 2224 bytes
   Bound to:
   BRI0:1 is up, line protocol is up 
   Hardware is BRI
   MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec, 
   reliability 255/255, txload 1/255, rxload 1/255
   Encapsulation PPP, loopback not set
   Keepalive set (10 sec)
   Time to interface disconnect: idle 00:01:11
   Interface is bound to Di0 (Encapsulation PPP)
   LCP Open
   Open: IPCP
   Last input 00:00:48, output 00:00:00, output hang never
   Last clearing of "show interface" counters never
   Queueing strategy: fifo
   Output queue 0/40, 0 drops; input queue 0/75, 0 drops
   5 minute input rate 0 bits/sec, 0 packets/sec
   5 minute output rate 0 bits/sec, 0 packets/sec
   136 packets input, 3857 bytes, 0 no buffer
   Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
   0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
   131 packets output, 3744 bytes, 0 underruns
   0 output errors, 0 collisions, 12 interface resets
   0 output buffer failures, 0 output buffers swapped out
   35 carrier transitions

   kevin#show ip route
   Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
   D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
   N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
   E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
   i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter
   area
   * - candidate default, U - per-user static route, o - ODR
   P - periodic downloaded static route

   Gateway of last resort is 10.48.74.1 to network 0.0.0.0

   10.0.0.0/8 is variably subnetted, 4 subnets, 3 masks
   C 10.9.9.0/24 is directly connected, Dialer0
   C 10.8.8.0/24 is directly connected, Loopback0
   C 10.9.9.1/32 is directly connected, Dialer0
   C 10.48.74.0/23 is directly connected, Ethernet0
   S* 0.0.0.0/0 [254/0] via 10.48.74.1

在此，我们可以通过在远程串行接口上使用 no shutdown 命令来模拟主链路的恢复： 

   krimson# 
   *Mar 4 15:28:58.726: %LINK-3-UPDOWN: Interface Serial0, changed state to up
   *Mar 4 15:28:59.730: %LINEPROTO-5-UPDOWN: Line protocol on Interface
   Serial0, changed state to up

备份会在空闲超时之后断开。 

   krimson#show isdn active

   --------------------------------------------------------------------------------
   ISDN ACTIVE CALLS

   --------------------------------------------------------------------------------
   Call Calling Called Remote Seconds Seconds Seconds Charges
   Type Number Number Name Used Left Idle
   Units/Currency

   --------------------------------------------------------------------------------
   Out 8114 kevin 120 1 118 0
   --------------------------------------------------------------------------------

   krimson#
   *Mar 4 15:29:41.738: BR0:1 DDR: idle timeout
   *Mar 4 15:29:41.742: BR0 DDR: has total 0 call(s), dial_out 0, dial_in 0
   *Mar 4 15:29:41.746: BR0:1 PPP: Treating connection as a callout
   *Mar 4 15:29:41.750: %DIALER-6-UNBIND: Interface BR0:1 unbound from profile
   Di0
   *Mar 4 15:29:41.754: BR0:1 DDR: disconnecting call
   *Mar 4 15:29:41.758: %ISDN-6-DISCONNECT: Interface BRI0:1 disconnected from
   8114 kevin, call lasted 121 seconds
   *Mar 4 15:29:41.774: ISDN BR0: TX -> DISCONNECT pd = 8 callref = 0x09
   *Mar 4 15:29:41.782: Cause i = 0x8090 - Normal call clearing
   *Mar 4 15:29:41.790: Di0 IPCP: Remove route to 10.9.9.2
   *Mar 4 15:29:41.862: ISDN BR0: RX <- RELEASE pd = 8 callref = 0x89
   *Mar 4 15:29:41.886: %LINK-3-UPDOWN: Interface BRI0:1, changed state to down
   *Mar 4 15:29:41.894: BR0:1 IPCP: State is Closed
   *Mar 4 15:29:41.894: BR0:1 PPP: Phase is TERMINATING [0 sess, 0 load]
   *Mar 4 15:29:41.898: BR0:1 LCP: State is Closed
   *Mar 4 15:29:41.898: BR0:1 PPP: Phase is DOWN [0 sess, 0 load]
   *Mar 4 15:29:41.902: BR0:1 DDR: disconnecting call
   *Mar 4 15:29:41.910: ISDN BR0: TX -> RELEASE_COMP pd = 8 callref = 0x09
   *Mar 4 15:29:42.886: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:1,
   changed state to down

现在，初始状态已经恢复。 

   krimson#show ip route
   Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
   D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
   N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
   E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
   i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter
   area
   * - candidate default, U - per-user static route, o - ODR
   P - periodic downloaded static route

   Gateway of last resort is 10.48.74.1 to network 0.0.0.0

   10.0.0.0/8 is variably subnetted, 5 subnets, 2 masks
   C 10.1.2.0/24 is directly connected, Serial0
   S 10.8.8.0/24 [1/0] via 10.1.2.2
   C 10.9.9.0/24 is directly connected, Dialer0
   C 10.7.7.0/24 is directly connected, Loopback0
   C 10.48.74.0/23 is directly connected, Ethernet0
   S* 0.0.0.0/0 [254/0] via 10.48.74.1

相关信息

修订历史记录

版本 发布日期 备注
1.0
04-Feb-2010
初始版本

此文档是否有帮助?

Feedback反馈

联系我们

本文档适用于以下产品