在 DLSw 上配置 SNA 交换服务

下载选项

PDF (234.6 KB)
在各种设备上使用 Adobe Reader 查看
ePub (95.9 KB)
在 iPhone、iPad、Android、Sony Reader 或 Windows Phone 上使用各种应用查看
Mobi (Kindle) (93.3 KB)
在 Kindle 设备上查看或在多个设备上使用 Kindle 应用查看

已更新: 2005 年 9 月 9 日

文档 ID:12253

非歧视性语言

此产品的文档集力求使用非歧视性语言。在本文档集中，非歧视性语言是指不隐含针对年龄、残障、性别、种族身份、族群身份、性取向、社会经济地位和交叉性的歧视的语言。由于产品软件的用户界面中使用的硬编码语言、基于 RFP 文档使用的语言或引用的第三方产品使用的语言，文档中可能无法确保完全使用非歧视性语言。深入了解思科如何使用包容性语言。

关于此翻译

思科采用人工翻译与机器翻译相结合的方式将此文档翻译成不同语言，希望全球的用户都能通过各自的语言得到支持性的内容。请注意：即使是最好的机器翻译，其准确度也不及专业翻译人员的水平。 Cisco Systems, Inc. 对于翻译的准确性不承担任何责任，并建议您总是参考英文原始文档（已提供链接）。

SNASw 4700与Cisco IOS?软件版本12.1(7)
带思科IOS软件版本12.1(7)的CIP 7507
下游物理单元(DSPU)4700，带思科IOS软件版本12.0(10)

本文档中的信息都是基于特定实验室环境中的设备编写的。本文档中使用的所有设备最初均采用原始（默认）配置。如果您使用的是真实网络，请确保您已经了解所有命令的潜在影响。

腕
FEP
帕拉
大型机

仅上游连接需要链路语句，上游和下游连接都只需要一个VDLC端口定义。

Braho??SNASwitch路由器配置
! version 12.1 service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname brachio ! no logging buffered ! ! ! ! ! ip subnet-zero no ip domain-lookup ! cns event-service server ! source-bridge ring-group 2 dlsw local-peer peer-id 10.64.3.195 dlsw remote-peer 0 tcp 10.64.3.194 dlsw remote-peer 0 tcp 192.168.25.18 ! ! interface TokenRing0 ip address 10.64.3.195 255.255.255.240 ip ospf authentication-key mypasswo ring-speed 16 ! interface TokenRing1 ip address 192.168.25.19 255.255.255.240 ring-speed 16 source-bridge 200 1 2 ! snasw cpname P390.BRACHIO snasw dlus P390.P390SSCP snasw port PVDLC vdlc 2 mac 4000.0000.1234 snasw link LVDLC port PVDLC rmac 4000.0000.0001 ! router ospf 1 log-adjacency-changes network 0.0.0.0 255.255.255.255 area 0 ! ip classless no ip http server ! ! ! line con 0 exec-timeout 0 0 transport input none line aux 0 line vty 0 4 login ! end

Braho??SNASwitch路由器配置

!
version 12.1
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname brachio
!
no logging buffered
!
!
!
!
!
ip subnet-zero
no ip domain-lookup
!
cns event-service server
!
source-bridge ring-group 2
dlsw local-peer peer-id 10.64.3.195
dlsw remote-peer 0 tcp 10.64.3.194
dlsw remote-peer 0 tcp 192.168.25.18
!
!
interface TokenRing0
ip address 10.64.3.195 255.255.255.240
ip ospf authentication-key mypasswo
ring-speed 16
!
interface TokenRing1
ip address 192.168.25.19 255.255.255.240
ring-speed 16
source-bridge 200 1 2
!
snasw cpname P390.BRACHIO
snasw dlus P390.P390SSCP
snasw port PVDLC vdlc 2 mac 4000.0000.1234
snasw link LVDLC port PVDLC rmac 4000.0000.0001
!
router ospf 1
log-adjacency-changes
network 0.0.0.0 255.255.255.255 area 0
!
ip classless
no ip http server
!
!
!
line con 0
exec-timeout 0 0
transport input none                                                  
line aux 0
line vty 0 4
login
!
end

FEP ???CIP路由器配置
! version 12.1 service timestamps debug datetime service timestamps log datetime no service password-encryption ! hostname FEP ! boot system flash slot0:rsp-a3jsv-mz.121-7.bin logging buffered 64000 debugging ! ! ! microcode CIP flash slot0:cip27-17 microcode reload ! source-bridge ring-group 60 dlsw local-peer peer-id 10.64.3.194 dlsw remote-peer 0 tcp 10.64.3.195 ! ! interface TokenRing0/0 ip address 10.64.3.194 255.255.255.240 ip nat inside ip ospf authentication-key pass no ip mroute-cache ethernet-transit-oui 90-compatible ring-speed 16 multiring all source-bridge 100 1 60 source-bridge spanning llc2 local-window 127 ! ! interface Channel5/0 no ip address no keepalive csna 0100 40 ! interface Channel5/1 no ip address no keepalive shutdown ! interface Channel5/2 no keepalive lan TokenRing 0 source-bridge 600 1 60 adapter 0 4000.0000.0001 ! ! router ospf 1 log-adjacency-changes redistribute static network 0.0.0.0 255.255.255.255 area 0 default-information originate ! ! line con 0 exec-timeout 0 0 transport input none line aux 0 line vty 0 4 exec-timeout 0 0 password cisco login !

FEP ???CIP路由器配置

!
version 12.1
service timestamps debug datetime
service timestamps log datetime
no service password-encryption
!
hostname FEP
!
boot system flash slot0:rsp-a3jsv-mz.121-7.bin
logging buffered 64000 debugging
!
!
!
microcode CIP flash slot0:cip27-17
microcode reload

!
source-bridge ring-group 60
dlsw local-peer peer-id 10.64.3.194
dlsw remote-peer 0 tcp 10.64.3.195
!
!
interface TokenRing0/0
ip address 10.64.3.194 255.255.255.240
ip nat inside
ip ospf authentication-key pass
no ip mroute-cache
ethernet-transit-oui 90-compatible
ring-speed 16
multiring all
source-bridge 100 1 60
source-bridge spanning
llc2 local-window 127
!
!
interface Channel5/0
no ip address
no keepalive
csna 0100 40
!
interface Channel5/1
no ip address
no keepalive
shutdown
!
interface Channel5/2
no keepalive
lan TokenRing 0
source-bridge 600 1 60
adapter 0 4000.0000.0001
!
!
router ospf 1
log-adjacency-changes
redistribute static
network 0.0.0.0 255.255.255.255 area 0                                
default-information originate
!
!
line con 0
exec-timeout 0 0
transport input none
line aux 0
line vty 0 4
exec-timeout 0 0
password cisco
login
!

帕拉$1？DSPU路由器配置
! version 12.0 service timestamps debug datetime msec service timestamps log uptime no service password-encryption ! hostname para ! enable secret 5 $1$py25$yYt4gnt.YlmsBH00wQW3G1 enable password parra ! ip subnet-zero ! source-bridge ring-group 300 dlsw local-peer peer-id 192.168.25.18 dlsw remote-peer 0 tcp 10.64.3.195 ! ! dspu vdlc 300 4000.0000.5678 dspu vdlc enable-host lsap 12 ! dspu host DPU4 xid-snd 01700004 rmac 4000.0000.1234 rsap 4 lsap 12 ! dspu vdlc start DPU4 ! ! interface TokenRing0 ip address 192.168.25.18 255.255.255.240 no ip directed-broadcast ring-speed 16 source-bridge 200 1 300 source-bridge spanning ! router ospf 1 network 0.0.0.0 255.255.255.255 area 0 ! ip classless ! line con 0 exec-timeout 0 0 transport input none line aux 0 line vty 0 4 password parra login ! end

帕拉$1？DSPU路由器配置

!
version 12.0
service timestamps debug datetime msec
service timestamps log uptime
no service password-encryption
!
hostname para
!
enable secret 5 $1$py25$yYt4gnt.YlmsBH00wQW3G1
enable password parra
!
ip subnet-zero
!
source-bridge ring-group 300
dlsw local-peer peer-id 192.168.25.18
dlsw remote-peer 0 tcp 10.64.3.195
!
!
dspu vdlc 300 4000.0000.5678
dspu vdlc enable-host lsap 12
!
dspu host DPU4 xid-snd 01700004 rmac 4000.0000.1234 rsap 4 lsap 12    
!
dspu vdlc start DPU4
!
!
interface TokenRing0
ip address 192.168.25.18 255.255.255.240
no ip directed-broadcast
ring-speed 16
source-bridge 200 1 300
source-bridge spanning
!
router ospf 1
network 0.0.0.0 255.255.255.255 area 0
!
ip classless
!
line con 0
exec-timeout 0 0
transport input none
line aux 0
line vty 0 4
password parra
login
!
end

大型机$1？?VTAM配置
XCA 主节点 XCAE40R VBUILD TYPE=XCA / XPE40R PORT CUADDR=E40,ADAPNO=0,SAPADDR=4,MEDIUM=RING, - DELAY=0,TIMER=30 / / --------------------------------------- XCAE40R PERIPHERAL NODES / ---------------------------------------------------------------- / XGE40R GROUP DIAL=YES,CALL=IN,ANSWER=ON,ISTATUS=ACTIVE XGRL00 LINE XGRP00 PU / XGRL01 LINE XGRP01 PU / XGRL02 LINE XGRP02 PU / XGRL03 LINE XGRP03 PU / XGRL04 LINE XGRP04 PU / XGRL05 LINE XGRP05 PU / XGRL06 LINE XGRP06 PU SNASwitch控制点的交换主节点 VBUILD TYPE=SWNET * * BRACHPU PU ADDR=01, NOT USED X DISCNT=NO, WHEN TO DISCONNECT X ANS=CONTINUE, X ISTATUS=ACTIVE, X NETID=P390, X CPCP=YES, X CONNTYPE=APPN, X CPNAME=BRACHIO, X HPR=YES, X PUTYPE=2 * PU2.0设备的交换主节点通过DLUR管道连接 VBUILD TYPE=SWNET, INCREASE # IF MORE PU X MAXGRP=19, MAX NO OF PATH GROUPS X MAXNO=19 MAX NO OF 'TEL' NOS * * DPU4 PU ADDR=01, NOT USED X DISCNT=NO, WHEN TO DISCONNECT X IDBLK=017, ** MUST MATCH 'PU' CUST X IDNUM=00004, MUST MATCH 'PU' CUST (LAST 5 OF TR ADDR!) X IRETRY=YES, REPOLL ON IDLE DETECT T/O ? X LOGAPPL=A06TSO, INITIAL LOGON X MAXDATA=265, PIU SIZE (FIXED FOR DCA CS) X MAXOUT=7, NO OF PIUS BEFORE RESPONSE ? X MAXPATH=1, MAX NO OF 'DIALOUT' PATHS X PASSLIM=7, MAX NO OF CONTIG PIUS SENT ? X USSTAB=USSS, X MODETAB=ISTINCLM, X DLOGMOD=M2782, X SSCPFM=USSSCS, X PUTYPE=2 * * DLU42 LU LOCADDR=2 DLU43 LU LOCADDR=3 DLU44 LU LOCADDR=4 DLU45 LU LOCADDR=5 DLU46 LU LOCADDR=6 DLU47 LU LOCADDR=7 *

大型机$1？?VTAM配置

XCA 主节点

XCAE40R VBUILD TYPE=XCA
*/*
XPE40R    PORT CUADDR=E40,ADAPNO=0,SAPADDR=4,MEDIUM=RING,   -
DELAY=0,TIMER=30
*/*
*/* --------------------------------------- XCAE40R PERIPHERAL NODES
*/* ----------------------------------------------------------------
*/*
XGE40R   GROUP DIAL=YES,CALL=IN,ANSWER=ON,ISTATUS=ACTIVE
XGRL00    LINE
XGRP00      PU
*/*
XGRL01    LINE
XGRP01      PU
*/*
XGRL02    LINE
XGRP02      PU
*/*
XGRL03    LINE
XGRP03      PU
*/*
XGRL04    LINE
XGRP04      PU
*/*
XGRL05    LINE
XGRP05      PU
*/*
XGRL06    LINE
XGRP06      PU

SNASwitch控制点的交换主节点

VBUILD TYPE=SWNET
*
*
BRACHPU  PU    ADDR=01,      NOT USED                   X
DISCNT=NO,                 WHEN TO DISCONNECT           X
ANS=CONTINUE,                                           X
ISTATUS=ACTIVE,                                         X
NETID=P390,                                             X
CPCP=YES,                                               X
CONNTYPE=APPN,                                          X
CPNAME=BRACHIO,                                         X
HPR=YES,                                                X
PUTYPE=2
*

PU2.0设备的交换主节点通过DLUR管道连接

VBUILD TYPE=SWNET,         INCREASE # IF MORE PU        X
MAXGRP=19,                 MAX NO OF PATH GROUPS        X
MAXNO=19                   MAX NO OF 'TEL' NOS
*
*
DPU4     PU    ADDR=01,      NOT USED                   X
DISCNT=NO,                 WHEN TO DISCONNECT           X
IDBLK=017,                 **  MUST MATCH 'PU' CUST     X
IDNUM=00004,  MUST MATCH 'PU' CUST (LAST 5 OF TR ADDR!) X
IRETRY=YES,                REPOLL ON IDLE DETECT T/O  ? X
LOGAPPL=A06TSO,            INITIAL LOGON                X
MAXDATA=265,               PIU SIZE (FIXED FOR DCA CS)  X
MAXOUT=7,                  NO OF PIUS BEFORE RESPONSE ? X
MAXPATH=1,                 MAX NO OF 'DIALOUT' PATHS    X
PASSLIM=7,                 MAX NO OF CONTIG PIUS SENT ? X
USSTAB=USSS,                                            X
MODETAB=ISTINCLM,                                       X
DLOGMOD=M2782,                                          X
SSCPFM=USSSCS,                                          X
PUTYPE=2
*
*
DLU42    LU    LOCADDR=2
DLU43    LU    LOCADDR=3
DLU44    LU    LOCADDR=4
DLU45    LU    LOCADDR=5
DLU46    LU    LOCADDR=6
DLU47    LU    LOCADDR=7
*

验证

此部分提供您能使用的，用以确认您的配置正常工作的信息。

命令输出解释程序工具（仅限注册用户）支持某些 show 命令，使用此工具可以查看对 show 命令输出的分析。

以下show命令输出示例显示示例配置中路由器的状态信息：

para# show dspu

dspu host DPU4 Vdlc  PU STATUS Active
FRAMES RECEIVED 7 FRAMES SENT 7
LUs USED BY DSPU 0 LUs ACTIVE 0
LUs USED BY API 0 LUs ACTIVE 0
LUs ACTIVATED BY HOST BUT NOT USED 6

brachio# show snasw link

Number of links 2
SNA Links                                                            HPR
Link Name     State    Port Name   Adjacent CP Name  Node Type     Sess  Sup
---------    --------  ---------   ----------------  ------------  ----  ---
1> @I000003   Active    PVDLC      P390.DPU4         LEN Node         7  No
2> LVDLC      Active    PVDLC      P390.P390SSCP     Network Node     2  Yes

brachio# show snasw dlus

Number of Dependent LU Servers 1
SNA Dependent LU Servers
DLUS Name          Default?  Backup?  Pipe State         PUs
-----------------  --------  -------  ----------------  -------
1> P390.P390SSCP      Yes       No       Active            1

brachio# show snasw pu

Number of DLUR PUs 1
SNA DLUR PUs
PU Name    PU ID     State       DLUS Name
--------  --------  --------  -----------------
1> DPU4    01700004  Active    P390.P390SSCP

以下显示命令输出示例显示虚拟电信访问方法(VTAM)的状态：

D NET,ID=SNASW1,E

IST097I DISPLAY ACCEPTED
IST075I NAME = SNASW1, TYPE = SW SNA MAJ NODE 231
IST486I STATUS= ACTIV, DESIRED STATE= ACTIV
IST1656I VTAMTOPO = REPORT, NODE REPORTED - YES
IST084I NETWORK RESOURCES:
IST089I BRACHPU  TYPE = PU_T2.1          , ACTIV--L--
IST1500I STATE TRACE = OFF
IST314I END

D NET,ID=XCAE40R,E

IST097I DISPLAY ACCEPTED
IST075I NAME = XCAE40R, TYPE = XCA MAJOR NODE 234
IST486I STATUS= ACTIV, DESIRED STATE= ACTIV
IST1021I MEDIUM=RING,ADAPNO= 0,CUA=0E40,SNA SAP= 4
IST654I I/O TRACE = OFF, BUFFER TRACE = OFF
IST1656I VTAMTOPO = REPORT, NODE REPORTED - YES
IST170I LINES:
IST232I XGRL00   ACTIV
IST232I XGRL01   ACTIV
IST232I XGRL02   ACTIV
IST232I XGRL03   ACTIV
IST232I XGRL04   ACTIV
IST232I XGRL05   ACTIV
IST232I XGRL06   ACTIV
IST314I END

D NET,ID=CISCOPU4,E

IST097I DISPLAY ACCEPTED
IST075I NAME = CISCOPU4, TYPE = SW SNA MAJ NODE 237
IST486I STATUS= ACTIV, DESIRED STATE= ACTIV
IST1656I VTAMTOPO = REPORT, NODE REPORTED - YES
IST084I NETWORK RESOURCES:
IST089I DPU4     TYPE = PU_T2.1          , ACTIV
IST089I DLU42    TYPE = LOGICAL UNIT     , ACTIV
IST089I DLU43    TYPE = LOGICAL UNIT     , ACTIV
IST089I DLU44    TYPE = LOGICAL UNIT     , ACTIV
IST089I DLU45    TYPE = LOGICAL UNIT     , ACTIV
IST089I DLU46    TYPE = LOGICAL UNIT     , ACTIV
IST089I DLU47    TYPE = LOGICAL UNIT     , ACTIV
IST314I END

故障排除

目前没有针对此配置的故障排除信息。

在 DLSw 上配置 SNA 交换服务

下载选项

非歧视性语言

关于此翻译

目录

简介

先决条件

要求

使用的组件

规则

配置

网络图

配置

验证

故障排除

相关信息

此文档是否有帮助?

联系我们