从Nexus交换机收集TAC请求的输出的快速参考指南

下载选项

  • PDF     (141.1 KB)
    在各种设备上使用 Adobe Reader 查看
  • ePub     (78.2 KB)
    在 iPhone、iPad、Android、Sony Reader 或 Windows Phone 上使用各种应用查看
  • Mobi (Kindle)     (68.7 KB)
    在 Kindle 设备上查看或在多个设备上使用 Kindle 应用查看
已更新: 2019 年 2 月 8 日
文档 ID:214107

非歧视性语言

此产品的文档集力求使用非歧视性语言。在本文档集中，非歧视性语言是指不隐含针对年龄、残障、性别、种族身份、族群身份、性取向、社会经济地位和交叉性的歧视的语言。由于产品软件的用户界面中使用的硬编码语言、基于 RFP 文档使用的语言或引用的第三方产品使用的语言，文档中可能无法确保完全使用非歧视性语言。 深入了解思科如何使用包容性语言。

关于此翻译

思科采用人工翻译与机器翻译相结合的方式将此文档翻译成不同语言，希望全球的用户都能通过各自的语言得到支持性的内容。 请注意：即使是最好的机器翻译，其准确度也不及专业翻译人员的水平。 Cisco Systems, Inc. 对于翻译的准确性不承担任何责任，并建议您总是参考英文原始文档（已提供链接）。

    简介

     本文档列出了在TAC案例问题期间/之后从Nexus交换机收集的一组通用命令。

    命令列表可以按照列出的方式粘贴到交换机CLI中，而无需进行任何更改。如果未实施相应功能，某些命令可能会出错。这是预期结果，不会引起任何问题。

    如果您已主动将show tech附加到TAC案例，则可以忽略以下列表。

    Nexus 3000

    命令列表可以按照列出的方式粘贴到交换机CLI中，而无需进行任何更改。$(SWITCHNAME)将自动替换为主机名。

    echo 'show clock' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show clock >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show inventory' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show inventory >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show version' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show version >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show module' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show module >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show run' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show run >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show logging log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show logging log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show log nvram' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show log nvram >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show accounting log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show accounting log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show cdp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show cdp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show lldp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show lldp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show copp status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show copp status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show policy-map interface control-plane' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show policy-map interface control-plane >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show hardware rate-limiter' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show hardware rate-limiter >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show system reset-reason' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show system reset-reason >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show span summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show span summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show vpc' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vpc >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show int status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show int status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show port-channel summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show port-channel summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip int bri vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip int bri vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show cores' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show cores >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show diagnostic result mod all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show diagnostic result mod all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip route vrf all summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip route vrf all summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show mac address-table count' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show mac address-table count >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show vlan summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vlan summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show module internal exceptionlog' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show module internal exceptionlog >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show processes cpu history' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes cpu history >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show processes memory sort' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes memory sort >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show interface counters errors' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show interface counters errors >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show fex' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show fex >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show license usage' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show license usage >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip eigrp neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip eigrp neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip ospf neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip ospf neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip bgp vpnv4 vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip bgp vpnv4 vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'dir logflash:' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; dir logflash: >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt

    !zip the file
    gzip $(SWITCHNAME)_cmds_for_tac_case.txt

    Nexus 5000/6000

    echo 'show clock' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show clock >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show inventory' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show inventory >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show version' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show version >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show module' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show module >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show run' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show run >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show logging log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show logging log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show log nvram' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show log nvram >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show accounting log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show accounting log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show cdp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show cdp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show lldp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show lldp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show copp status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show copp status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show policy-map interface control-plane' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show policy-map interface control-plane >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show hardware rate-limiter' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show hardware rate-limiter >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show system reset-reason' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show system reset-reason >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show span summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show span summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show vpc' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vpc >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show int status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show int status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show port-channel summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show port-channel summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip int bri vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip int bri vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show cores' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show cores >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show diagnostic result mod all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show diagnostic result mod all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip route vrf all summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip route vrf all summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show mac address-table count' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show mac address-table count >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show vlan summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vlan summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show module internal exceptionlog' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show module internal exceptionlog >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show processes cpu history' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes cpu history >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show processes memory sort' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes memory sort >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show interface counters errors' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show interface counters errors >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show fex' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show fex >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show license usage' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show license usage >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip eigrp neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip eigrp neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip ospf neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip ospf neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip bgp vpnv4 vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip bgp vpnv4 vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'dir logflash:' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; dir logflash: >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt

    !zip the file
    gzip $(SWITCHNAME)_cmds_for_tac_case.txt

    Nexus 7000

    ！从管理VDC和相关VDC收集这些输出。

    echo 'show clock' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show clock >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show inventory' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show inventory >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show version' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show version >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show module' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show module >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show run' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show run >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show logging log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show logging log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show log nvram' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show log nvram >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show accounting log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show accounting log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show cdp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show cdp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show lldp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show lldp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show copp status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show copp status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show policy-map interface control-plane' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show policy-map interface control-plane >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show hardware rate-limiter' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show hardware rate-limiter >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show system reset-reason' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show system reset-reason >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show span summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show span summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show vpc' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vpc >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show int status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show int status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show port-channel summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show port-channel summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip int bri vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip int bri vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show cores' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show cores >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show diagnostic result mod all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show diagnostic result mod all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip route vrf all summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip route vrf all summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show mac address-table count' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show mac address-table count >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show vlan summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vlan summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show module internal exceptionlog' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show module internal exceptionlog >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show processes cpu history' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes cpu history >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show processes memory sort' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes memory sort >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show interface counters errors' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show interface counters errors >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show fex' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show fex >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show license usage' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show license usage >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip eigrp neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip eigrp neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip ospf neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip ospf neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip bgp vpnv4 vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip bgp vpnv4 vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'dir logflash:' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; dir logflash: >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show vdc' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vdc >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt

    !zip the file

    gzip $(SWITCHNAME)_cmds_for_tac_case.txt

    Nexus 9000

    echo 'show clock' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show clock >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show inventory' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show inventory >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show version' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show version >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show module' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show module >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show run' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show run >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show logging log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show logging log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show log nvram' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show log nvram >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show accounting log' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show accounting log >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show cdp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show cdp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show lldp nei' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show lldp nei >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show copp status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show copp status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show policy-map interface control-plane' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show policy-map interface control-plane >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show hardware rate-limiter' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show hardware rate-limiter >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show system reset-reason' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show system reset-reason >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show span summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show span summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show vpc' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vpc >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show int status' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show int status >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show port-channel summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show port-channel summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip int bri vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip int bri vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show cores' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show cores >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show diagnostic result mod all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show diagnostic result mod all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip route vrf all summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip route vrf all summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show mac address-table count' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show mac address-table count >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show vlan summary' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show vlan summary >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show module internal exceptionlog' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show module internal exceptionlog >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show processes cpu history' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes cpu history >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show processes memory sort' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show processes memory sort >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show interface counters errors' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show interface counters errors >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show fex' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show fex >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show license usage' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; Show license usage >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip eigrp neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip eigrp neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip ospf neighbor vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip ospf neighbor vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'show ip bgp vpnv4 vrf all' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; show ip bgp vpnv4 vrf all >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt
    echo 'dir logflash:' >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt ; dir logflash: >> bootflash:$(SWITCHNAME)_cmds_for_tac_case.txt

    !zip the file

    gzip $(SWITCHNAME)_cmds_for_tac_case.txt

    此文档是否有帮助?

    Feedback反馈

    联系我们

    本文档适用于以下产品