为拨入客户端配置基本 AAA RADIUS

下载选项

  • PDF     (337.5 KB)
    在各种设备上使用 Adobe Reader 查看
  • ePub     (108.3 KB)
    在 iPhone、iPad、Android、Sony Reader 或 Windows Phone 上使用各种应用查看
  • Mobi (Kindle)     (187.3 KB)
    在 Kindle 设备上查看或在多个设备上使用 Kindle 应用查看
已更新: 2005 年 9 月 9 日
文档 ID:14966

非歧视性语言

此产品的文档集力求使用非歧视性语言。在本文档集中，非歧视性语言是指不隐含针对年龄、残障、性别、种族身份、族群身份、性取向、社会经济地位和交叉性的歧视的语言。由于产品软件的用户界面中使用的硬编码语言、基于 RFP 文档使用的语言或引用的第三方产品使用的语言，文档中可能无法确保完全使用非歧视性语言。 深入了解思科如何使用包容性语言。

关于此翻译

思科采用人工翻译与机器翻译相结合的方式将此文档翻译成不同语言，希望全球的用户都能通过各自的语言得到支持性的内容。 请注意：即使是最好的机器翻译，其准确度也不及专业翻译人员的水平。 Cisco Systems, Inc. 对于翻译的准确性不承担任何责任，并建议您总是参考英文原始文档（已提供链接）。

简介

本文档介绍使用接入服务器接受传入的模拟和ISDN连接，并使用身份验证、授权和记帐(AAA)远程身份验证拨入用户服务(RADIUS)服务器对其进行身份验证的示例配置。有关AAA和RADIUS的详细信息，请参阅以下文档：

先决条件

要求

此配置假设RADIUS服务器已正确设置。此配置也适用于市场上最多的RADIUS服务器。有关正确服务器配置的详细信息，请参阅RADIUS服务器文档。

使用的组件

本文档中的信息基于以下软件和硬件版本。

  • 带T1 PRI和48数字调制解调器的Cisco AS5300。它运行Cisco IOS®软件版本12.0(7)T。

  • CiscoSecure for Unix(CSU)服务器，版本2.3(3)。

此处描述的AAA特定配置也可用于任何简单拨号方案。确保接入服务器可以接受传入呼叫，然后添加相应的AAA命令，如下面的配置所示。

本文档中的信息都是基于特定实验室环境中的设备创建的。本文档中使用的所有设备最初均采用原始（默认）配置。如果您是在真实网络上操作，请确保您在使用任何命令前已经了解其潜在影响。

规则

有关文档规则的详细信息，请参阅 Cisco 技术提示规则。

配置

本部分提供有关如何配置本文档所述功能的信息。

注：要查找有关本文档中使用的命令的其他信息，请使用命令查找工具(仅注册客户)。

网络图

本文档使用下图所示的网络设置。

basic_radius1.gif

配置

CSU和CiscoSecure NT(CSNT)配置以及网络接入服务器(NAS)配置如下。由于此配置描述的是简单的拨入方案，因此ISDN和异步用户的CiscoSecure配置是相同的。ISDN客户端配置不包括，因为它与此RADIUS配置无关。

CSU 
# ./ViewProfile -p 9900 -u async_client
 User Profile Information
 user = async_client{
 profile_id = 110
 profile_cycle = 2
 radius=Cisco {
 check_items= {
 2=cisco

 !--- Password(2) is "cisco"

 }
 reply_attributes= {
 6=2

 !--- Service-Type(6) is Framed (2)

 7=1

 !--- Frame




 d-Protocol(7) is PPP (1)

 }
    }
 }

 # ./ViewProfile -p 9900 -u isdn_user
 User Profile Information
 user = isdn_user{
 profile_id = 24
 profile_cycle = 4
 radius=Cisco {
 check_items= {
 2=cisco

 ! --- Password(2) is "cisco"

 }
 reply_attributes= {
 6=2

 ! --- Service-Type(6) is Framed (2)

 7=1
 
! --- Framed-Protocol(7) is PPP (1)

 }
    }
 }

注意：对于此简单方案，异步和ISDN用户的配置相同。

CSNT RADIUS

要配置CiscoSecure NT(CSNT)RADIUS，请执行以下操作：

  1. 创建名为isdn_user和async_client的新用户。

  2. 在“用户设置”部分配置适当的密码

  3. 在Internet工程任务组(IETF)RADIUS属性的部分，从下拉菜单中选择以下项：

    Service-type（属性6）= Framed and Framed-Protocol（属性7）=PPP

    注：必须单击属性Service-Type和Framed-Protocol旁的复选框。

    注意：对于此简单方案，异步和ISDN用户的配置相同。

maui-nas-01 
maui-nas-01#show running-config 
 Building configuration...

 Current configuration:
 !
 version 12.0
 service timestamps debug datetime msec
 service timestamps log datetime msec
 service password-encryption
 !
 hostname maui-nas-01
 !
 aaa new-model

 !--- Initiates the AAA access control system. !--- This command immediately locks down login and PPP authentication.

 aaa authentication login default group radius local

 !--- Exec login (for the list default) is authenticated using methods !--- radius then local. The router uses RADIUS for authentication at the !--- login(exec) prompt. If RADIUS returns an error, the user is authenticated !--- using the local database.

 aaa authentication login NO_AUTHEN none

 !--- Exec login (for the list NO_AUTHEN) has authentication method none !--- (no authentication). Interfaces to which this list is applied will not have !--- authentication enabled. Refer to the console port (line con 0) configuration.

 aaa authentication ppp default if-needed group radius local

 !--- PPP authentication (for the list default) uses methods radius then local. !--- The if-needed keyword automatically permits ppp for users that have !--- successfully authenticated using exec mode. If the EXEC facility has !--- authenticated the user, RADIUS authentication for PPP is not performed. !----This is necessary for clients that use terminal window after dial.

 aaa authorization network default group radius local

 !--- Authorization of network services (PPP services) for the list default !--- uses methods radius then local. This is neccessary if you use RADIUS !--- for the client IP address, Access List assignment and so on.

 enable secret 5 <deleted>
 !
 username admin password 7 <deleted>

 !--- This username allows for access to the router in situations where !--- connectivity to the RADIUS server is lost. This is because the AAA !--- configuration for exec login has the alternate method local. 

 spe 2/0 2/7
  firmware location system:/ucode/mica_port_firmware
 !
 resource-pool disable
 !
 ip subnet-zero
 no ip finger
 !
 isdn switch-type primary-ni

 !--- Switch type is Primary NI-2.

 isdn voice-call-failure 0
 mta receive maximum-recipients 0
 !
 !
 controller T1 0

 !--- T1 0 controller configuration.

  framing esf
  clock source line primary
  linecode b8zs
  pri-group timeslots 1-24
 !
 controller T1 1

 !--- T1 1 is unused.

  clock source line secondary 1
 !
 controller T1 2

 !--- T1 1 is unused.

 !
 controller T1 3

 !--- T1 1 is unused.

 !
 interface Ethernet0
  ip address 172.22.53.141 255.255.255.0
  no ip directed-broadcast
 !
 interface Serial0:23

 !--- D-channel configuration for T1 0.

  no ip address
  no ip directed-broadcast
  encapsulation ppp
  dialer pool-member 23

 !--- Assign Serial0:23 as member of dialer pool 23. !--- Dialer pool 23 is specified in interface Dialer 1. !--- Interface Dialer 1 will terminate the ISDN calls.

  isdn switch-type primary-ni
  isdn incoming-voice modem

 !--- Switch incoming analog calls to the internal digital modems.

  no cdp enable
 !
 interface FastEthernet0
  no ip address
  no ip directed-broadcast
  shutdown
  duplex auto
  speed auto
 !
 interface Group-Async0

 !--- Async Group Interface for the modems.

  ip unnumbered Ethernet0

 !--- Unnumbered to the ethernet interface.

  no ip directed-broadcast
  encapsulation ppp
  async mode interactive

 !--- Configures interactive mode on the asynchronous interfaces. !--- This allows users to dial in and get to a shell or PPP session on !--- that line. If you want incoming users to only connect using PPP configure !--- async mode dedicated instead.

  peer default ip address pool ASYNC

 !--- Use the ip pool named "ASYNC" to assign ip address for !--- incoming connections.

  ppp authentication chap
  group-range 1 48

 !--- Lines(modems) 1 through 48 are in this group async interface.

 !
 interface Dialer1

 !--- Dialer1 will terminate ISDN calls.

  ip unnumbered Ethernet0
  no ip directed-broadcast
  encapsulation ppp
  dialer pool 23

 !--- Dialer 1 uses dialer pool 23. Interface Serial0:23 is !--- a member of this pool.

  peer default ip address pool ISDN

 !--- Use the ip pool named "ISDN" to assign ip address for !--- incoming connections.

  no cdp enable
  ppp authentication chap
 !
 ip local pool ISDN 172.22.53.142 172.22.53.145

 !--- IP address pool named "ISDN". !--- This pool will be assigned to connections on interface Dialer 1.

 ip local pool ASYNC 172.22.53.146 172.22.53.149

 !--- IP address pool named "ASYNC". !--- This pool will be assigned to incoming connections on Group-Async 0. !--- Note: This address pool only has 4 addresses and is not sufficient to !--- support all 48 modem lines. Configure your IP pool with the address range !--- to support all connections.

 ip classless
 no ip http server
 !
 no cdp run
 !
 radius-server host 172.22.53.201 auth-port 1645 acct-port 1646 key cisco

 !--- Radius-server host IP address and encryption key. !--- The encryption key must match the onbe configured on the RADIUS server.

 !
 line con 0
  exec-timeout 0 0
  login authentication NO_AUTHEN

 !--- Specifies that the AAA list name assigned to the console is !--- NO_AUTHEN. From the AAA configuration above, the list NO_AUTHEN !--- does not use authentication.

  transport input none
 line 1 48

  autoselect during-login

 !--- Displays the username:password prompt after modems connect. !--- Without this the user must press enter to receive a prompt.

  autoselect ppp

 !--- When the NAS detects incoming PPP packets, the PPP session !--- will be launched.

  modem InOut
  transport preferred none
  transport input all
  transport output none
 line aux 0
 line vty 0 4
 !
 end

验证

本节提供可用于验证配置的信息。

show 输出示例 

maui-nas-01#show caller user async_client detail

  User: async_client, line tty 5, service Async
        Active time 00:01:04, Idle time 00:00:22
  Timeouts:            Absolute  Idle      Idle
                                 Session   Exec
      Limits:          -         -         00:10:00  
      Disconnect in:   -         -         -         
  TTY: Line 5, running PPP on As5
  Location: PPP: 172.22.53.148

 !--- The IP address assigned from the the IP pool. 

  DS0: (slot/unit/channel)=0/0/7
  Line: Baud rate (TX/RX) is 115200/115200, no parity, 1 stopbits, 8 databits
  Status: Ready, Active, No Exit Banner, Async Interface Active
          HW PPP Support Active
  Capabilities: Hardware Flowcontrol In, Hardware Flowcontrol Out
                Modem Callout, Modem RI is CD, 
                Line usable as async interface, Integrated Modem
  Modem State: Ready

  User: async_client, line As5, service PPP
        Active time 00:00:54, Idle time 00:00:23
  Timeouts:            Absolute  Idle
      Limits:          -         -         
      Disconnect in:   -         -         
  PPP: LCP Open, CHAP (<- AAA), IPCP

 !--- CHAP authentication was performed by AAA.

  LCP: -> peer, ACCM, AuthProto, MagicNumber, PCompression, ACCompression
       <- peer, ACCM, MagicNumber, PCompression, ACCompression
  NCP: Open IPCP
  IPCP: <- peer, Address
        -> peer, Address
  IP: Local 172.22.53.141, remote 172.22.53.148
  Counts: 40 packets input, 2769 bytes, 0 no buffer
          1 input errors, 1 CRC, 0 frame, 0 overrun
          24 packets output, 941 bytes, 0 underruns
          0 output errors, 0 collisions, 0 interface resets


maui-nas-01#show caller user isdn_user detail

  User: isdn_user, line Se0:8, service PPP
        Active time 00:01:22, Idle time 00:01:24
  Timeouts:            Absolute  Idle
      Limits:          -         00:02:00  
      Disconnect in:   -         00:00:35  
  PPP: LCP Open, CHAP (<- AAA), IPCP

!--- CHAP authentication was performed by AAA.

  LCP: -> peer, AuthProto, MagicNumber
       <- peer, MagicNumber
  NCP: Open IPCP
  IPCP: <- peer, Address
        -> peer, Address
  Dialer: Connected to , inbound
          Idle timer 120 secs, idle 84 secs
          Type is ISDN, group Dialer1

 ! -- The ISDN Call uses int Dialer1.

  IP: Local 172.22.53.141, remote 172.22.53.142

 ! -- The IP address was obtained from the local pool.

  Counts: 31 packets input, 872 bytes, 0 no buffer
          0 input errors, 0 CRC, 0 frame, 0 overrun
          34 packets output, 1018 bytes, 0 underruns
          0 output errors, 0 collisions, 5 interface resets

故障排除

本部分提供的信息可用于对配置进行故障排除。

故障排除命令

命令输出解释程序工具（仅限注册用户）支持某些 show 命令，使用此工具可以查看对 show 命令输出的分析。

注意：在发出debug命令之前，请参阅有关Debug命令的重要信息。

  • debug isdn q931 — 此示例显示路由器和ISDN交换机之间ISDN网络连接（第3层）的呼叫建立和断开。

  • debug modem — 显示接入服务器上的调制解调器线路活动。

  • debug ppp negotiation - 在协商链路控制协议（LCP）、认证以及网络控制协议（NCP）时，显示关于PPP流量与交换的信息。一个成功的PPP协商协议首先开启LCP状态，然后是鉴权，最后协商NCP。

  • debug ppp authentication - 显示PPP验证协议消息，其中包括质询 握手 验证 协议（CHAP）信息包交换以及密码 验证 协议（PAP）交换。

  • debug aaa authentication — 显示有关AAA/RADIUS身份验证的信息。

  • debug aaa authorization — 显示有关AAA/RADIUS授权的信息。

  • debug radius — 显示与RADIUS关联的详细调试信息。使用思科技术支持网站上的输出解释程序工具（仅限注册客户）解码debug radius消息。有关示例，请参阅下面所示的调试输出。使用debug radius中的信息确定要协商的属性。注意：自12.2(11)T起，调试半径的输出已经解码，因此不需要使用输出解释器来解码输出。有关详细信息，请参阅文档RADIUS调试增强功能

  • show caller user — 显示特定用户的参数，如所用的TTY线路、异步接口（机架、插槽或端口）、DS0通道号、调制解调器号、分配的IP地址、PPP和PPP捆绑参数等。如果您的Cisco IOS版本不支持本命令，请使用show user命令。

调试输出示例

basicradius_2.gif

如果从Cisco设备获得debug radius命令的输出，则可以使用 来显示潜在的故障和修复方法。若要使用这种功能，您必须是 注册 用户，能够登录入系统并且启用JavaScript功能。 来显示潜在的问题和修复方法，但使用 ，但你必须是注册用户，而且已经登录，并启用了JavaScript。

注意：自12.2(11)T起，调试半径的输出已经解码，因此不需要使用输出解释程序来解码输出。有关详细信息，请参阅文档RADIUS调试增强功能 

maui-nas-01#debug isdn q931
ISDN Q931 packets debugging is on
maui-nas-01#debug ppp negotiation 
PPP protocol negotiation debugging is on
maui-nas-01#debug ppp authentication
PPP authentication debugging is on
maui-nas-01#debug modem
Modem control/process activation debugging is on
maui-nas-01#debug aaa authentication 
AAA Authentication debugging is on
maui-nas-01#debug aaa authorization 
AAA Authorization debugging is on
maui-nas-01#debug radius
RADIUS protocol debugging is on

maui-nas-01#
*Apr  5 11:05:07.031: ISDN Se0:23: RX <-  SETUP pd = 8  callref = 0x20FC

!--- Setup message for incoming call.

*Apr  5 11:05:07.031:         Bearer Capability i = 0x8890218F
*Apr  5 11:05:07.031:         Channel ID i = 0xA18387
*Apr  5 11:05:07.031:         Called Party Number i = 0xA1, '81560'
*Apr  5 11:05:07.035: %DIALER-6-BIND: Interface Serial0:6 bound to profile Dialer1
*Apr  5 11:05:07.035: ISDN Se0:23: TX ->  CALL_PROC pd = 8  callref = 0xA0FC
*Apr  5 11:05:07.035:         Channel ID i = 0xA98387
*Apr  5 11:05:07.043: %LINK-3-UPDOWN: Interface Serial0:6, changed state to up
*Apr  5 11:05:07.043: Se0:6 PPP: Treating connection as a callin
*Apr  5 11:05:07.043: Se0:6 PPP: Phase is ESTABLISHING, Passive Open
*Apr  5 11:05:07.043: Se0:6 LCP: State is Listen
*Apr  5 11:05:07.047: ISDN Se0:23: TX ->  CONNECT pd = 8  callref = 0xA0FC
*Apr  5 11:05:07.047:         Channel ID i = 0xA98387
*Apr  5 11:05:07.079: ISDN Se0:23: RX <-  CONNECT_ACK pd = 8  callref = 0x20FC

*Apr  5 11:05:07.079: ISDN Se0:23: CALL_PROGRESS: CALL_CONNECTED call id 0x2D, 
bchan -1, dsl 0
*Apr  5 11:05:07.499: Se0:6 LCP: I CONFREQ [Listen] id 28 len 10
*Apr  5 11:05:07.499: Se0:6 LCP:    MagicNumber 0x5078A51F (0x05065078A51F)
*Apr  5 11:05:07.499: Se0:6 AAA/AUTHOR/FSM: (0): LCP succeeds trivially
*Apr  5 11:05:07.499: Se0:6 LCP: O CONFREQ [Listen] id 2 len 15
*Apr  5 11:05:07.499: Se0:6 LCP:    AuthProto CHAP (0x0305C22305)
*Apr  5 11:05:07.499: Se0:6 LCP:    MagicNumber 0xE05213AA (0x0506E05213AA)
*Apr  5 11:05:07.499: Se0:6 LCP: O CONFACK [Listen] id 28 len 10
*Apr  5 11:05:07.499: Se0:6 LCP:    MagicNumber 0x5078A51F (0x05065078A51F)
*Apr  5 11:05:07.555: Se0:6 LCP: I CONFACK [ACKsent] id 2 len 15
*Apr  5 11:05:07.555: Se0:6 LCP:    AuthProto CHAP (0x0305C22305)
*Apr  5 11:05:07.555: Se0:6 LCP:    MagicNumber 0xE05213AA (0x0506E05213AA)
*Apr  5 11:05:07.555: Se0:6 LCP: State is Open
*Apr  5 11:05:07.555: Se0:6 PPP: Phase is AUTHENTICATING, by this end
*Apr  5 11:05:07.555: Se0:6 CHAP: O CHALLENGE id 2 len 32 from "maui-nas-01"
*Apr  5 11:05:07.631: Se0:6 CHAP: I RESPONSE id 2 len 30 from "isdn_user"

!--- Incoming CHAP response from "isdn_user".

*Apr  5 11:05:07.631: AAA: parse name=Serial0:6 idb type=12 tty=-1
*Apr  5 11:05:07.631: AAA: name=Serial0:6 flags=0x51 type=1 shelf=0 slot=0 
adapter=0 port=0 channel=6
*Apr  5 11:05:07.631: AAA: parse name= idb type=-1 tty=-1
*Apr  5 11:05:07.631: AAA/MEMORY: create_user (0x619CEE28) user='isdn_user' 
ruser='' port='Serial0:6' rem_addr='isdn/81560' authen_type=CHAP service=PPP 
priv=1
*Apr  5 11:05:07.631: AAA/AUTHEN/START (2973699846): port='Serial0:6' list='' 
action=LOGIN service=PPP
*Apr  5 11:05:07.631: AAA/AUTHEN/START (2973699846): using "default" list
*Apr  5 11:05:07.631: AAA/AUTHEN (2973699846): status = UNKNOWN
*Apr  5 11:05:07.631: AAA/AUTHEN/START (2973699846): Method=radius (radius)

!--- AAA authentication method is RADIUS.

*Apr  5 11:05:07.631: RADIUS: ustruct sharecount=1
*Apr  5 11:05:07.631: RADIUS: Initial Transmit Serial0:6 id 13 172.22.53.201:1645, 
Access-Request, len 87

!--- Access-Request from the NAS to the AAA server. !--- Note the IP address in the Access-Request matches the IP address !--- configured using the command: !--- radius-server host 172.22.53.201 key cisco 

*Apr  5 11:05:07.631:         Attribute 4 6 AC16358D
*Apr  5 11:05:07.631:         Attribute 5 6 00004E26
*Apr  5 11:05:07.631:         Attribute 61 6 00000002
*Apr  5 11:05:07.631:         Attribute 1 11 6973646E
*Apr  5 11:05:07.631:         Attribute 30 7 38313536
*Apr  5 11:05:07.631:         Attribute 3 19 0297959E
*Apr  5 11:05:07.631:         Attribute 6 6 00000002
*Apr  5 11:05:07.631:         Attribute 7 6 00000001
*Apr  5 11:05:07.635: RADIUS: Received from id 13 172.22.53.201:1645, 
Access-Accept, len 32
*Apr  5 11:05:07.635:         Attribute 6 6 00000002
*Apr  5 11:05:07.635:         Attribute 7 6 00000001

需要对debug radius命令中的属性值对(AVP)进行解码，以便更好地理解NAS和RADIUS服务器之间的事务。

注意：自12.2(11)T起，调试半径的输出已经解码，因此不需要使用输出解释程序来解码输出。有关详细信息，请参阅文档RADIUS调试增强功能。

通过输出解释程序工具，您可以接收对调试RADIUS输出的分析。

以下斜体输出是从输出解释程序工具获取的结果： 

Access-Request 172.22.53.201:1645 id 13
Attribute Type 4:  NAS-IP-Address is 172.22.53.141
Attribute Type 5:  NAS-Port is 20006
Attribute Type 61: NAS-Port-Type is ISDN-Synchronous
Attribute Type 1:  User-Name is isdn
Attribute Type 30: Called-Station-ID(DNIS) is 8156
Attribute Type 3:  CHAP-Password is (encoded)
Attribute Type 6:  Service-Type is Framed
Attribute Type 7:  Framed-Protocol is PPP
Access-Accept 172.22.53.201:1645 id 13
Attribute Type 6:  Service-Type is Framed
Attribute Type 7:  Framed-Protocol is PPP

从工具解码的调试输出中，验证属性类型6:服务类型为Framed，属性类型为7:Framed-Protocol是PPP。如果您发现属性6或7未如图所示，请更正RADIUS服务器上的用户配置文件(请参阅“配置”部分)。 另请注意debug radius显示Access-Accept，该命令表示RADIUS服务器已成功对用户进行身份验证。如果输出显示Access-Reject，则用户未通过身份验证，您应检查RADIUS服务器上的用户名和密码配置。另一个要验证的属性是属性类型4:NAS-IP-Address。验证输出解释程序工具显示的值是否与RADIUS服务器上配置的NAS IP地址匹配。

注意：由于Cisco IOS限制以及调试输出中不同版本的差异，某些属性可能会被截断(例如User-Name， Called-Station-ID(DNIS))。

*Apr  5 11:05:07.635: AAA/AUTHEN (2973699846): status = PASS

!--- Authentication is successful

*Apr  5 11:05:07.635: Se0:6 AAA/AUTHOR/LCP: Authorize LCP
*Apr  5 11:05:07.635: Se0:6 AAA/AUTHOR/LCP (2783657211): Port='Serial0:6' 
list='' service=NET
*Apr  5 11:05:07.635: AAA/AUTHOR/LCP: Se0:6 (2783657211) user='isdn_user'
*Apr  5 11:05:07.635: Se0:6 AAA/AUTHOR/LCP (2783657211): send AV service=ppp
*Apr  5 11:05:07.635: Se0:6 AAA/AUTHOR/LCP (2783657211): send AV protocol=lcp
*Apr  5 11:05:07.635: Se0:6 AAA/AUTHOR/LCP (2783657211): found list "default"
*Apr  5 11:05:07.635: Se0:6 AAA/AUTHOR/LCP (2783657211): Method=radius (radius)
*Apr  5 11:05:07.635: Se0:6 AAA/AUTHOR (2783657211): Post authorization status 
= PASS_REPL
*Apr  5 11:05:07.639: Se0:6 AAA/AUTHOR/LCP: Processing AV service=ppp
*Apr  5 11:05:07.639: Se0:6 CHAP: O SUCCESS id 2 len 4
*Apr  5 11:05:07.639: Se0:6 PPP: Phase is UP
*Apr  5 11:05:07.639: Se0:6 AAA/AUTHOR/FSM: (0): Can we start IPCP?
*Apr  5 11:05:07.639: Se0:6 AAA/AUTHOR/FSM (3184893369): Port='Serial0:6' list='' 
service=NET
*Apr  5 11:05:07.639: AAA/AUTHOR/FSM: Se0:6 (3184893369) user='isdn_user'
*Apr  5 11:05:07.639: Se0:6 AAA/AUTHOR/FSM (3184893369): send AV service=ppp
*Apr  5 11:05:07.639: Se0:6 AAA/AUTHOR/FSM (3184893369): send AV protocol=ip
*Apr  5 11:05:07.639: Se0:6 AAA/AUTHOR/FSM (3184893369): found list "default"
*Apr  5 11:05:07.639: Se0:6 AAA/AUTHOR/FSM (3184893369): Method=radius (radius)
*Apr  5 11:05:07.639: Se0:6 AAA/AUTHOR (3184893369): Post authorization status 
= PASS_REPL
*Apr  5 11:05:07.639: Se0:6 AAA/AUTHOR/FSM: We can start IPCP
*Apr  5 11:05:07.639: Se0:6 IPCP: O CONFREQ [Not negotiated] id 2 len 10
*Apr  5 11:05:07.639: Se0:6 IPCP:    Address 172.22.53.141 (0x0306AC16358D)
*Apr  5 11:05:07.675: Se0:6 IPCP: I CONFREQ [REQsent] id 13 len 10
*Apr  5 11:05:07.675: Se0:6 IPCP:    Address 0.0.0.0 (0x030600000000)
*Apr  5 11:05:07.675: Se0:6 AAA/AUTHOR/IPCP: Start.  Her address 0.0.0.0, 
we want 0.0.0.0
*Apr  5 11:05:07.675: Se0:6 AAA/AUTHOR/IPCP: Processing AV service=ppp
*Apr  5 11:05:07.675: Se0:6 AAA/AUTHOR/IPCP: Authorization succeeded
*Apr  5 11:05:07.675: Se0:6 AAA/AUTHOR/IPCP: Done.  Her address 0.0.0.0, 
we want 0.0.0.0
*Apr  5 11:05:07.675: Se0:6 IPCP: Pool returned 172.22.53.142

!--- IP address for the peer obtained from the pool

*Apr  5 11:05:07.675: Se0:6 IPCP: O CONFNAK [REQsent] id 13 len 10
*Apr  5 11:05:07.675: Se0:6 IPCP:    Address 172.22.53.142 (0x0306AC16358E)
*Apr  5 11:05:07.699: Se0:6 IPCP: I CONFACK [REQsent] id 2 len 10
*Apr  5 11:05:07.699: Se0:6 IPCP:    Address 172.22.53.141 (0x0306AC16358D)
*Apr  5 11:05:07.707: Se0:6 IPCP: I CONFREQ [ACKrcvd] id 14 len 10
*Apr  5 11:05:07.707: Se0:6 IPCP:    Address 172.22.53.142 (0x0306AC16358E)
*Apr  5 11:05:07.707: Se0:6 AAA/AUTHOR/IPCP: Start.  Her address 172.22.53.142, 
we want 172.22.53.142
*Apr  5 11:05:07.707: Se0:6 AAA/AUTHOR/IPCP (3828612481): Port='Serial0:6' 
list='' service=NET
*Apr  5 11:05:07.707: AAA/AUTHOR/IPCP: Se0:6 (3828612481) user='isdn_user'
*Apr  5 11:05:07.707: Se0:6 AAA/AUTHOR/IPCP (3828612481): send AV service=ppp
*Apr  5 11:05:07.707: Se0:6 AAA/AUTHOR/IPCP (3828612481): send AV protocol=ip
*Apr  5 11:05:07.707: Se0:6 AAA/AUTHOR/IPCP (3828612481): send AV 
addr*172.22.53.142
*Apr  5 11:05:07.707: Se0:6 AAA/AUTHOR/IPCP (3828612481): found list "default"
*Apr  5 11:05:07.707: Se0:6 AAA/AUTHOR/IPCP (3828612481): Method=radius (radius)
*Apr  5 11:05:07.707: Se0:6 AAA/AUTHOR (3828612481): Post authorization status 
= PASS_REPL
*Apr  5 11:05:07.707: Se0:6 AAA/AUTHOR/IPCP: Reject 172.22.53.142, 
using 172.22.53.142
*Apr  5 11:05:07.707: Se0:6 AAA/AUTHOR/IPCP: Processing AV service=ppp
*Apr  5 11:05:07.707: Se0:6 AAA/AUTHOR/IPCP: Processing AV addr*172.22.53.142
*Apr  5 11:05:07.707: Se0:6 AAA/AUTHOR/IPCP: Authorization succeeded
*Apr  5 11:05:07.707: Se0:6 AAA/AUTHOR/IPCP: Done.  Her address 172.22.53.142, 
we want 172.22.53.142
*Apr  5 11:05:07.707: Se0:6 IPCP: O CONFACK [ACKrcvd] id 14 len 10
*Apr  5 11:05:07.707: Se0:6 IPCP:    Address 172.22.53.142 (0x0306AC16358E)
*Apr  5 11:05:07.707: Se0:6 IPCP: State is Open
*Apr  5 11:05:07.711: Di1 IPCP: Install route to 172.22.53.142

!--- IPCP state is open. A route to the remote peer is installed

*Apr  5 11:05:08.639: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0:6, 
changed state to up
*Apr  5 11:05:13.043: %ISDN-6-CONNECT: Interface Serial0:6 is now connected 
to isdn_user
maui-nas-01#

ISDN客户端的协商完成。以下输出显示异步呼叫（例如Windows客户端）的协商 

maui-nas-01#
*Apr  5 11:05:53.527: ISDN Se0:23: RX <-  SETUP pd = 8  callref = 0x21C5

!--- Incoming Setup message for Async Call.

*Apr  5 11:05:53.527:         Bearer Capability i = 0x9090A2
*Apr  5 11:05:53.527:         Channel ID i = 0xA18388
*Apr  5 11:05:53.527:         Progress Ind i = 0x8183 - Origination address 
is non-ISDN 
*Apr  5 11:05:53.527:         Called Party Number i = 0xA1, '81560'
*Apr  5 11:05:53.531: ISDN Se0:23: TX ->  CALL_PROC pd = 8  callref = 0xA1C5
*Apr  5 11:05:53.531:         Channel ID i = 0xA98388
*Apr  5 11:05:53.531: ISDN Se0:23: TX ->  ALERTING pd = 8  callref = 0xA1C5
*Apr  5 11:05:53.667: ISDN Se0:23: TX ->  CONNECT pd = 8  callref = 0xA1C5
*Apr  5 11:05:53.683: ISDN Se0:23: RX <-  CONNECT_ACK pd = 8  callref = 0x21C5

*Apr  5 11:05:53.687: ISDN Se0:23: CALL_PROGRESS: CALL_CONNECTED call id 0x2E, 
bchan -1, dsl 0
*Apr  5 11:06:10.815: TTY5: DSR came up
*Apr  5 11:06:10.815: tty5: Modem: IDLE->(unknown)
*Apr  5 11:06:10.815: TTY5: EXEC creation
*Apr  5 11:06:10.815: AAA: parse name=tty5 idb type=10 tty=5
*Apr  5 11:06:10.815: AAA: name=tty5 flags=0x11 type=4 shelf=0 slot=0 adapter=0 
port=5 channel=0
*Apr  5 11:06:10.815: AAA: parse name=Serial0:7 idb type=12 tty=-1
*Apr  5 11:06:10.815: AAA: name=Serial0:7 flags=0x51 type=1 shelf=0 slot=0 
adapter=0 port=0 channel=7
*Apr  5 11:06:10.815: AAA/MEMORY: create_user (0x614D4DBC) user='' ruser='' 
port='tty5' rem_addr='async/81560' authen_type=ASCII service=LOGIN priv=1
*Apr  5 11:06:10.815: AAA/AUTHEN/START (2673527044): port='tty5' list='' 
action=LOGIN service=LOGIN
*Apr  5 11:06:10.815: AAA/AUTHEN/START (2673527044): using "default" list
*Apr  5 11:06:10.815: AAA/AUTHEN/START (2673527044): Method=radius (radius)
*Apr  5 11:06:10.815: AAA/AUTHEN (2673527044): status = GETUSER
*Apr  5 11:06:10.815: TTY5: set timer type 10, 30 seconds
*Apr  5 11:06:13.475: TTY5: Autoselect(2) sample 7E
*Apr  5 11:06:13.475: TTY5: Autoselect(2) sample 7EFF
*Apr  5 11:06:13.475: TTY5: Autoselect(2) sample 7EFF7D
*Apr  5 11:06:13.475: TTY5: Autoselect(2) sample 7EFF7D23
*Apr  5 11:06:13.475: TTY5 Autoselect cmd:  ppp negotiate

!--- the router recongnizes the ppp packets and launches ppp.

*Apr  5 11:06:13.475: AAA/AUTHEN/ABORT: (2673527044) because Autoselected.
*Apr  5 11:06:13.475: AAA/MEMORY: free_user (0x614D4DBC) user='' ruser='' 
port='tty5' rem_addr='async/81560' authen_type=ASCII service=LOGIN priv=1
*Apr  5 11:06:13.479: TTY5: EXEC creation
*Apr  5 11:06:13.479: TTY5: create timer type 1, 600 seconds
*Apr  5 11:06:13.607: TTY5: destroy timer type 1 (OK)
*Apr  5 11:06:13.607: TTY5: destroy timer type 0
*Apr  5 11:06:15.607: %LINK-3-UPDOWN: Interface Async5, changed state to up
*Apr  5 11:06:15.607: As5 PPP: Treating connection as a dedicated line
*Apr  5 11:06:15.607: As5 PPP: Phase is ESTABLISHING, Active Open

!--- PPP negotiation begins.

*Apr  5 11:06:15.607: As5 AAA/AUTHOR/FSM: (0): LCP succeeds trivially
*Apr  5 11:06:15.607: As5 LCP: O CONFREQ [Closed] id 1 len 25
*Apr  5 11:06:15.607: As5 LCP:    ACCM 0x000A0000 (0x0206000A0000)
*Apr  5 11:06:15.607: As5 LCP:    AuthProto CHAP (0x0305C22305)
*Apr  5 11:06:15.607: As5 LCP:    MagicNumber 0xE0531DB8 (0x0506E0531DB8)
*Apr  5 11:06:15.607: As5 LCP:    PFC (0x0702)
*Apr  5 11:06:15.607: As5 LCP:    ACFC (0x0802)
*Apr  5 11:06:16.487: As5 LCP: I CONFREQ [REQsent] id 3 len 23
*Apr  5 11:06:16.487: As5 LCP:    ACCM 0x000A0000 (0x0206000A0000)
*Apr  5 11:06:16.487: As5 LCP:    MagicNumber 0x65FFA5C7 (0x050665FFA5C7)
*Apr  5 11:06:16.487: As5 LCP:    PFC (0x0702)
*Apr  5 11:06:16.487: As5 LCP:    ACFC (0x0802)
*Apr  5 11:06:16.487: As5 LCP:    Callback 6  (0x0D0306)
*Apr  5 11:06:16.487: Unthrottle 5
*Apr  5 11:06:16.487: As5 LCP: O CONFREJ [REQsent] id 3 len 7
*Apr  5 11:06:16.487: As5 LCP:    Callback 6  (0x0D0306)
*Apr  5 11:06:17.607: As5 LCP: TIMEout: State REQsent
*Apr  5 11:06:17.607: As5 LCP: O CONFREQ [REQsent] id 2 len 25
*Apr  5 11:06:17.607: As5 LCP:    ACCM 0x000A0000 (0x0206000A0000)
*Apr  5 11:06:17.607: As5 LCP:    AuthProto CHAP (0x0305C22305)
*Apr  5 11:06:17.607: As5 LCP:    MagicNumber 0xE0531DB8 (0x0506E0531DB8)
*Apr  5 11:06:17.607: As5 LCP:    PFC (0x0702)
*Apr  5 11:06:17.607: As5 LCP:    ACFC (0x0802)
*Apr  5 11:06:17.735: As5 LCP: I CONFACK [REQsent] id 2 len 25
*Apr  5 11:06:17.735: As5 LCP:    ACCM 0x000A0000 (0x0206000A0000)
*Apr  5 11:06:17.735: As5 LCP:    AuthProto CHAP (0x0305C22305)
*Apr  5 11:06:17.735: As5 LCP:    MagicNumber 0xE0531DB8 (0x0506E0531DB8)
*Apr  5 11:06:17.735: As5 LCP:    PFC (0x0702)
*Apr  5 11:06:17.735: As5 LCP:    ACFC (0x0802)
*Apr  5 11:06:19.479: As5 LCP: I CONFREQ [ACKrcvd] id 4 len 23
*Apr  5 11:06:19.479: As5 LCP:    ACCM 0x000A0000 (0x0206000A0000)
*Apr  5 11:06:19.479: As5 LCP:    MagicNumber 0x65FFA5C7 (0x050665FFA5C7)
*Apr  5 11:06:19.479: As5 LCP:    PFC (0x0702)
*Apr  5 11:06:19.479: As5 LCP:    ACFC (0x0802)
*Apr  5 11:06:19.479: As5 LCP:    Callback 6  (0x0D0306)
*Apr  5 11:06:19.479: As5 LCP: O CONFREJ [ACKrcvd] id 4 len 7
*Apr  5 11:06:19.479: As5 LCP:    Callback 6  (0x0D0306)
*Apr  5 11:06:19.607: As5 LCP: TIMEout: State ACKrcvd
*Apr  5 11:06:19.607: As5 LCP: O CONFREQ [ACKrcvd] id 3 len 25
*Apr  5 11:06:19.607: As5 LCP:    ACCM 0x000A0000 (0x0206000A0000)
*Apr  5 11:06:19.607: As5 LCP:    AuthProto CHAP (0x0305C22305)
*Apr  5 11:06:19.607: As5 LCP:    MagicNumber 0xE0531DB8 (0x0506E0531DB8)
*Apr  5 11:06:19.607: As5 LCP:    PFC (0x0702)
*Apr  5 11:06:19.607: As5 LCP:    ACFC (0x0802)
*Apr  5 11:06:19.607: As5 LCP: I CONFREQ [REQsent] id 5 len 20
*Apr  5 11:06:19.607: As5 LCP:    ACCM 0x000A0000 (0x0206000A0000)
*Apr  5 11:06:19.607: As5 LCP:    MagicNumber 0x65FFA5C7 (0x050665FFA5C7)
*Apr  5 11:06:19.607: As5 LCP:    PFC (0x0702)
*Apr  5 11:06:19.607: As5 LCP:    ACFC (0x0802)
*Apr  5 11:06:19.607: As5 LCP: O CONFACK [REQsent] id 5 len 20
*Apr  5 11:06:19.607: As5 LCP:    ACCM 0x000A0000 (0x0206000A0000)
*Apr  5 11:06:19.607: As5 LCP:    MagicNumber 0x65FFA5C7 (0x050665FFA5C7)
*Apr  5 11:06:19.607: As5 LCP:    PFC (0x0702)
*Apr  5 11:06:19.607: As5 LCP:    ACFC (0x0802)
*Apr  5 11:06:19.719: As5 LCP: I CONFACK [ACKsent] id 3 len 25
*Apr  5 11:06:19.719: As5 LCP:    ACCM 0x000A0000 (0x0206000A0000)
*Apr  5 11:06:19.719: As5 LCP:    AuthProto CHAP (0x0305C22305)
*Apr  5 11:06:19.719: As5 LCP:    MagicNumber 0xE0531DB8 (0x0506E0531DB8)
*Apr  5 11:06:19.719: As5 LCP:    PFC (0x0702)
*Apr  5 11:06:19.719: As5 LCP:    ACFC (0x0802)
*Apr  5 11:06:19.719: As5 LCP: State is Open
*Apr  5 11:06:19.719: As5 PPP: Phase is AUTHENTICATING, by this end
*Apr  5 11:06:19.719: As5 CHAP: O CHALLENGE id 1 len 32 from "maui-nas-01"
*Apr  5 11:06:19.863: As5 CHAP: I RESPONSE id 1 len 33 from "async_client"

!--- Incoming CHAP response from "async_client".

*Apr  5 11:06:19.863: AAA: parse name=Async5 idb type=10 tty=5
*Apr  5 11:06:19.863: AAA: name=Async5 flags=0x11 type=4 shelf=0 slot=0 
adapter=0 port=5 channel=0
*Apr  5 11:06:19.863: AAA: parse name=Serial0:7 idb type=12 tty=-1
*Apr  5 11:06:19.863: AAA: name=Serial0:7 flags=0x51 type=1 shelf=0 slot=0 
adapter=0 port=0 channel=7
*Apr  5 11:06:19.863: AAA/MEMORY: create_user (0x6195AE40) user='async_client' 
ruser='' port='Async5' rem_addr='async/81560' authen_type=CHAP service=PPP 
priv=1
*Apr  5 11:06:19.863: AAA/AUTHEN/START (2673347869): port='Async5' list='' 
action=LOGIN service=PPP
*Apr  5 11:06:19.863: AAA/AUTHEN/START (2673347869): using "default" list
*Apr  5 11:06:19.863: AAA/AUTHEN (2673347869): status = UNKNOWN
*Apr  5 11:06:19.863: AAA/AUTHEN/START (2673347869): Method=radius (radius)
*Apr  5 11:06:19.863: RADIUS: ustruct sharecount=1
*Apr  5 11:06:19.867: RADIUS: Initial Transmit Async5 id 14 172.22.53.201:1645, 
Access-Request, len 90
*Apr  5 11:06:19.867:         Attribute 4 6 AC16358D
*Apr  5 11:06:19.867:         Attribute 5 6 00000005
*Apr  5 11:06:19.867:         Attribute 61 6 00000000
*Apr  5 11:06:19.867:         Attribute 1 14 6173796E
*Apr  5 11:06:19.867:         Attribute 30 7 38313536
*Apr  5 11:06:19.867:         Attribute 3 19 01B8292F
*Apr  5 11:06:19.867:         Attribute 6 6 00000002
*Apr  5 11:06:19.867:         Attribute 7 6 00000001
*Apr  5 11:06:19.867: RADIUS: Received from id 14 172.22.53.201:1645, 
Access-Accept, len 32
*Apr  5 11:06:19.867:         Attribute 6 6 00000002
*Apr  5 11:06:19.871:         Attribute 7 6 00000001

需要对debug radius命令中的AVP进行解码，以便更好地了解NAS和RADIUS服务器之间的事务。

注意：自12.2(11)T起，调试半径的输出已经解码，因此不需要使用输出解释程序来解码输出。有关详细信息，请参阅文档RADIUS调试增强功能

通过输出解释程序工具，您可以接收对调试RADIUS输出的分析。

以下斜体输出是从输出解释程序工具获取的结果： 

Access-Request 172.22.53.201:1645 id 14
Attribute Type 4:  NAS-IP-Address is 172.22.53.141
Attribute Type 5:  NAS-Port is 5
Attribute Type 61: NAS-Port-Type is Asynchronous
Attribute Type 1:  User-Name is asyn
Attribute Type 30: Called-Station-ID(DNIS) is 8156
Attribute Type 3:  CHAP-Password is (encoded)
Attribute Type 6:  Service-Type is Framed
Attribute Type 7:  Framed-Protocol is PPP
         Access-Accept 172.22.53.201:1645 id 14
Attribute Type 6:  Service-Type is Framed
Attribute Type 7:  Framed-Protocol is PPP

从工具解码的调试输出中，验证属性类型6:服务类型为Framed，属性类型为7:Framed-Protocol是PPP。如果您发现属性6或7未如图所示，请更正RADIUS服务器上的用户配置文件(请参阅“配置”部分)。 另请注意debug radius显示Access-Accept，该命令表示RADIUS服务器已成功对用户进行身份验证。如果输出显示Access-Reject，则用户未通过身份验证，您应检查RADIUS服务器上的用户名和密码配置。另一个要验证的属性是属性类型4:NAS-IP-Address。验证输出解释程序工具显示的值是否与RADIUS服务器上配置的NAS IP地址匹配。

注意：由于Cisco IOS限制以及调试输出中不同版本的差异，某些属性可能会被截断(例如User-Name， Called-Station-ID(DNIS))。

*Apr  5 11:06:19.871: AAA/AUTHEN (2673347869): status = PASS
*Apr  5 11:06:19.871: As5 AAA/AUTHOR/LCP: Authorize LCP
*Apr  5 11:06:19.871: As5 AAA/AUTHOR/LCP (3232903941): Port='Async5' list='' 
service=NET
*Apr  5 11:06:19.871: AAA/AUTHOR/LCP: As5 (3232903941) user='async_client'
*Apr  5 11:06:19.871: As5 AAA/AUTHOR/LCP (3232903941): send AV service=ppp
*Apr  5 11:06:19.871: As5 AAA/AUTHOR/LCP (3232903941): send AV protocol=lcp
*Apr  5 11:06:19.871: As5 AAA/AUTHOR/LCP (3232903941): found list "default"
*Apr  5 11:06:19.871: As5 AAA/AUTHOR/LCP (3232903941): Method=radius (radius)
*Apr  5 11:06:19.871: As5 AAA/AUTHOR (3232903941): Post authorization status 
= PASS_REPL
*Apr  5 11:06:19.871: As5 AAA/AUTHOR/LCP: Processing AV service=ppp
*Apr  5 11:06:19.871: As5 CHAP: O SUCCESS id 1 len 4
*Apr  5 11:06:19.871: As5 PPP: Phase is UP
*Apr  5 11:06:19.871: As5 AAA/AUTHOR/FSM: (0): Can we start IPCP?
*Apr  5 11:06:19.871: As5 AAA/AUTHOR/FSM (1882093345): Port='Async5' list='' 
service=NET
*Apr  5 11:06:19.871: AAA/AUTHOR/FSM: As5 (1882093345) user='async_client'
*Apr  5 11:06:19.871: As5 AAA/AUTHOR/FSM (1882093345): send AV service=ppp
*Apr  5 11:06:19.871: As5 AAA/AUTHOR/FSM (1882093345): send AV protocol=ip
*Apr  5 11:06:19.871: As5 AAA/AUTHOR/FSM (1882093345): found list "default"
*Apr  5 11:06:19.871: As5 AAA/AUTHOR/FSM (1882093345): Method=radius (radius)
*Apr  5 11:06:19.871: As5 AAA/AUTHOR (1882093345): Post authorization status 
= PASS_REPL
*Apr  5 11:06:19.871: As5 AAA/AUTHOR/FSM: We can start IPCP
*Apr  5 11:06:19.875: As5 IPCP: O CONFREQ [Closed] id 1 len 10
*Apr  5 11:06:19.875: As5 IPCP:    Address 172.22.53.141 (0x0306AC16358D)
*Apr  5 11:06:19.991: As5 IPCP: I CONFREQ [REQsent] id 1 len 34
*Apr  5 11:06:19.991: As5 IPCP:    Address 0.0.0.0 (0x030600000000)
*Apr  5 11:06:19.991: As5 IPCP:    PrimaryDNS 0.0.0.0 (0x810600000000)
*Apr  5 11:06:19.991: As5 IPCP:    PrimaryWINS 0.0.0.0 (0x820600000000)
*Apr  5 11:06:19.991: As5 IPCP:    SecondaryDNS 0.0.0.0 (0x830600000000)
*Apr  5 11:06:19.991: As5 IPCP:    SecondaryWINS 0.0.0.0 (0x840600000000)
*Apr  5 11:06:19.991: As5 AAA/AUTHOR/IPCP: Start.  Her address 0.0.0.0, 
we want 172.22.53.148

!--- The address for the peer obtained from the pool.

*Apr  5 11:06:19.991: As5 AAA/AUTHOR/IPCP: Processing AV service=ppp
*Apr  5 11:06:19.991: As5 AAA/AUTHOR/IPCP: Authorization succeeded
*Apr  5 11:06:19.991: As5 AAA/AUTHOR/IPCP: Done.  Her address 0.0.0.0, 
we want 172.22.53.148
*Apr  5 11:06:19.991: As5 IPCP: O CONFREJ [REQsent] id 1 len 22
*Apr  5 11:06:19.991: As5 IPCP:    PrimaryWINS 0.0.0.0 (0x820600000000)
*Apr  5 11:06:19.995: As5 IPCP:    SecondaryDNS 0.0.0.0 (0x830600000000)
*Apr  5 11:06:19.995: As5 IPCP:    SecondaryWINS 0.0.0.0 (0x840600000000)
*Apr  5 11:06:20.007: As5 IPCP: I CONFACK [REQsent] id 1 len 10
*Apr  5 11:06:20.007: As5 IPCP:    Address 172.22.53.141 (0x0306AC16358D)
*Apr  5 11:06:20.119: As5 IPCP: I CONFREQ [ACKrcvd] id 2 len 16
*Apr  5 11:06:20.119: As5 IPCP:    Address 0.0.0.0 (0x030600000000)
*Apr  5 11:06:20.119: As5 IPCP:    PrimaryDNS 0.0.0.0 (0x810600000000)
*Apr  5 11:06:20.119: As5 AAA/AUTHOR/IPCP: Start.  Her address 0.0.0.0, 
we want 172.22.53.148
*Apr  5 11:06:20.119: As5 AAA/AUTHOR/IPCP: Processing AV service=ppp
*Apr  5 11:06:20.119: As5 AAA/AUTHOR/IPCP: Authorization succeeded
*Apr  5 11:06:20.119: As5 AAA/AUTHOR/IPCP: Done.  Her address 0.0.0.0, 
we want 172.22.53.148
*Apr  5 11:06:20.119: As5 IPCP: O CONFNAK [ACKrcvd] id 2 len 16
*Apr  5 11:06:20.119: As5 IPCP:    Address 172.22.53.148 (0x0306AC163594)
*Apr  5 11:06:20.119: As5 IPCP:    PrimaryDNS 172.22.53.210 (0x8106AC1635D2)
*Apr  5 11:06:20.231: As5 IPCP: I CONFREQ [ACKrcvd] id 3 len 16
*Apr  5 11:06:20.231: As5 IPCP:    Address 172.22.53.148 (0x0306AC163594)
*Apr  5 11:06:20.231: As5 IPCP:    PrimaryDNS 172.22.53.210 (0x8106AC1635D2)
*Apr  5 11:06:20.231: As5 AAA/AUTHOR/IPCP: Start.  Her address 172.22.53.148, 
we want 172.22.53.148
*Apr  5 11:06:20.231: As5 AAA/AUTHOR/IPCP (3727543204): Port='Async5' list='' 
service=NET
*Apr  5 11:06:20.231: AAA/AUTHOR/IPCP: As5 (3727543204) user='async_client'
*Apr  5 11:06:20.231: As5 AAA/AUTHOR/IPCP (3727543204): send AV service=ppp
*Apr  5 11:06:20.231: As5 AAA/AUTHOR/IPCP (3727543204): send AV protocol=ip
*Apr  5 11:06:20.231: As5 AAA/AUTHOR/IPCP (3727543204): send AV addr*172.22.53.148
*Apr  5 11:06:20.231: As5 AAA/AUTHOR/IPCP (3727543204): found list "default"
*Apr  5 11:06:20.231: As5 AAA/AUTHOR/IPCP (3727543204): Method=radius (radius)
*Apr  5 11:06:20.235: As5 AAA/AUTHOR (3727543204): Post authorization status 
= PASS_REPL
*Apr  5 11:06:20.235: As5 AAA/AUTHOR/IPCP: Reject 172.22.53.148, 
using 172.22.53.148
*Apr  5 11:06:20.235: As5 AAA/AUTHOR/IPCP: Processing AV service=ppp
*Apr  5 11:06:20.235: As5 AAA/AUTHOR/IPCP: Processing AV addr*172.22.53.148
*Apr  5 11:06:20.235: As5 AAA/AUTHOR/IPCP: Authorization succeeded
*Apr  5 11:06:20.235: As5 AAA/AUTHOR/IPCP: Done.  Her address 172.22.53.148, 
we want 172.22.53.148
*Apr  5 11:06:20.235: As5 IPCP: O CONFACK [ACKrcvd] id 3 len 16
*Apr  5 11:06:20.235: As5 IPCP:    Address 172.22.53.148 (0x0306AC163594)
*Apr  5 11:06:20.235: As5 IPCP:    PrimaryDNS 172.22.53.210 (0x8106AC1635D2)
*Apr  5 11:06:20.235: As5 IPCP: State is Open
*Apr  5 11:06:20.235: As5 IPCP: Install route to 172.22.53.148

!--- Route to remote peer is installed.

*Apr  5 11:06:20.871: %LINEPROTO-5-UPDOWN: Line protocol on Interface Async5, 
changed state to up

相关信息

修订历史记录

版本 发布日期 备注
1.0
09-Sep-2005
初始版本

此文档是否有帮助?

Feedback反馈

联系我们