简介
本文档介绍如何更改安全终端GUI的语言。
先决条件
要求
Cisco 建议您了解以下主题:
- Cisco Secure Endpoint
- Windows操作系统
使用的组件
- 安全终端8.0.1
- Windows 10 21H2
- Windows 11 21H2
本文档中的信息都是基于特定实验室环境中的设备编写的。本文档中使用的所有设备最初均采用原始(默认)配置。如果您的网络处于活动状态,请确保您了解所有命令的潜在影响。
配置
引入安全客户端(安全终端8)后,可以使用下列语言之一显示GUI(列表可能会有所更改,请验证受支持语言的版本说明):
· 捷克语
· 荷兰语
· 法语
· 德语
· 匈牙利语
· 意大利语
· 日语
· 韩语
· 波兰语
· 葡萄牙语
· 俄语
· 简体汉语
· 西班牙语
· 繁体中文
检查当前的系统区域设置
检查Windows中的系统区域设置。打开运行应用程序并执行msinfo32以打开系统信息:
![Run window with msinfo32 typed in the form. Below OK, Cancel and Browse... buttons.](/c/dam/en/us/support/docs/security/secure-endpoint/218041-configure-secure-client-ui-language-00.png)
在System Information(系统信息)窗口中,您可以看到System Summary > Locale下的System Locale:
![Window of System Information where on System Summary you can find the Locale set as United States](/c/dam/en/us/support/docs/security/secure-endpoint/218041-configure-secure-client-ui-language-01.png)
安全终端UI以英文显示:
![Cisco Secure Client GUI in English](/c/dam/en/us/support/docs/security/secure-endpoint/218041-configure-secure-client-ui-language-02.png)
配置系统区域设置
要更改安全终端语言,我们需要更改系统区域设置。同样的过程也适用于Windows 10和Windows 11。
可以在控制面板>区域>管理>更改系统区域设置中执行此操作
![Three windows, Control Panel and Region selected. Once opened, Admin tab to Change system locale button. Current set English.](/c/dam/en/us/support/docs/security/secure-endpoint/218041-configure-secure-client-ui-language-03.png)
注意:更改系统区域设置需要重新启动。
验证GUI语言
此示例说明将System Locale更改为German后会发生什么情况:
![Region settings window, German set](/c/dam/en/us/support/docs/security/secure-endpoint/218041-configure-secure-client-ui-language-04.png)
重新启动后,我们将验证System Information:
![Msinfo32 window with locale set to German](/c/dam/en/us/support/docs/security/secure-endpoint/218041-configure-secure-client-ui-language-05.png)
我们还会检查安全终端的GUI:
![Cisco Secure Client GUI in German](/c/dam/en/us/support/docs/security/secure-endpoint/218041-configure-secure-client-ui-language-06.png)
![Secure Client GUI about section in German](/c/dam/en/us/support/docs/security/secure-endpoint/218041-configure-secure-client-ui-language-07.png)
现在您可以看到,GUI以德语显示。
故障排除
必须了解安全终端UI语言是根据系统区域设置设置的。新Windows设置中的语言或区域设置不会更改安全终端UI的语言:
Windows 11:
![Three windows, Windows settings, msinfo32 and Cisco Secure Client in German](/c/dam/en/us/support/docs/security/secure-endpoint/218041-configure-secure-client-ui-language-08.png)
Windows 10:
![Regional settings in built-in metro app](/c/dam/en/us/support/docs/security/secure-endpoint/218041-configure-secure-client-ui-language-09.png)
![Three windows, Settings msinfo32 and Cisco Secure Client GUI](/c/dam/en/us/support/docs/security/secure-endpoint/218041-configure-secure-client-ui-language-10.png)