T.37离线管道电传

下载选项

  • PDF     (260.6 KB)
    在各种设备上使用 Adobe Reader 查看
  • ePub     (96.3 KB)
    在 iPhone、iPad、Android、Sony Reader 或 Windows Phone 上使用各种应用查看
  • Mobi (Kindle)     (89.3 KB)
    在 Kindle 设备上查看或在多个设备上使用 Kindle 应用查看
已更新: 2006 年 2 月 2 日
文档 ID:47764

非歧视性语言

此产品的文档集力求使用非歧视性语言。在本文档集中，非歧视性语言是指不隐含针对年龄、残障、性别、种族身份、族群身份、性取向、社会经济地位和交叉性的歧视的语言。由于产品软件的用户界面中使用的硬编码语言、基于 RFP 文档使用的语言或引用的第三方产品使用的语言，文档中可能无法确保完全使用非歧视性语言。 深入了解思科如何使用包容性语言。

关于此翻译

思科采用人工翻译与机器翻译相结合的方式将此文档翻译成不同语言，希望全球的用户都能通过各自的语言得到支持性的内容。 请注意：即使是最好的机器翻译，其准确度也不及专业翻译人员的水平。 Cisco Systems, Inc. 对于翻译的准确性不承担任何责任，并建议您总是参考英文原始文档（已提供链接）。

简介

“IP T.37传真存储和转发传真”主文档的此部分重点介绍OffRamp存储和转发传真。OffRamp T.37是网关接受电子邮件、将该电子邮件转换为传真，然后通过语音端口将其发送出去的过程。

本文档包含使功能正常运行所需的必要配置。“故障排除”部分将介绍有用的debug命令以及如何解释其含义。网络图部分显示了所用的拓扑。

先决条件

要求

本文档的具体要求在主节“IP T.37传真存储和转发传真”中指定。

使用的组件

本文档不限于特定的软件和硬件版本。

本文档中的信息都是基于特定实验室环境中的设备编写的。本文档中使用的所有设备最初均采用原始（默认）配置。如果您使用的是真实网络，请确保您已经了解所有命令的潜在影响。

规则

有关文件规则的更多信息请参见“ Cisco技术提示规则”。

配置

在以下各节中，首先解释与OffRamp传真配置相关的Cisco IOS®软件配置参数，然后显示5300配置，并附上进一步说明，阐明重要命令的功能。

网络图

本文档使用下图所示的网络设置。

offramp_faxing1.gif

配置参数

以下是网关的OffRamp配置中使用的常见命令：

必需参数：
fax interface-type fax-mail 为网关启用T.37功能。需要在5300上重新启动，但不是在5350或5400上重新启动。
mta receive aliases 定义要用作OffRamp网关别名的主机名。最多可定义10个。如果入站邮件的目标主机名与别名匹配，则网关会接受传入邮件。
mta receive maximum-recipients 定义此网关处理的并发简单邮件传输协议(SMTP)收件人的最大数量。
拨号对等体语音号码mmoip 应用分流 传入被叫号码 信息类型传真 application offramp命令指呼叫应用语音名称命令。名称与offramp匹配。incoming called-number命令用于匹配此IP多媒体邮件(MMoIP)对等体入站。information-type fax命令将与此对等体关联的呼叫标识为传真传输。
呼叫应用语音名称位置 为应用（本例中为offramp）及其位置（在外部TFTP服务器上，本例中为offramp）定义全局名称。
可选参数：
fax send transmitting-subscriber 定义传输用户标识(TSI)。
fax send center-header fax send left-header fax send right-header 选项有：{$a$ | $d$ | $p$ | $s$ | $t$ |字符串}
  • $a$ — 日期
  • $d$ — 目标地址
  • $s$ — 发件人地址
  • $p$ — 页计数
  • $t$ -传输时间
使用此命令中的string参数可插入个性化的文本字符串。
传真发送封面 选项有：
  • enable — 启用OffRamp网关以发送封皮。
  • 注释 — 向封面添加个性化注释。
  • show-detail — 将整个邮件标题作为封面的一部分打印。
mta receive generate-mdn 使OffRamp网关能够响应消息处置通知(MDN)请求。

OffRamp配置

电子邮件从Outlook Express发送到OffRamp网关(vdtl-5350-8a)，并发送到多个目标。

vdtl-5350-8a# show run
Building configuration...

Current configuration : 6415 bytes
!
!
version 12.2
service timestamps debug datetime msec localtime
service timestamps log datetime msec localtime
no service password-encryption
!
hostname vdtl-5350-8a
!
boot system flash c5350-is-mz.122-7.6.T1
enable secret 5 $1$MmyY$IQ3OW1Yfd9xjOJj5lYaC7.
!
!
resource-pool disable
clock timezone EST -5
!
!
ip subnet-zero
ip cef
ip domain-name testlab-t37.com
ip name-server 172.18.106.36
!
isdn switch-type primary-5ess
!
!
fax send transmitting-subscriber $s$
fax send left-header $t$
fax send center-header $s$
fax send right-header $p$
fax send coverpage enable
fax send coverpage show-detail
fax send coverpage comment vdtl-5350-8a Offramp Cover Page
fax interface-type fax-mail
mta receive aliases vdtl-5350-8a.testlab-t37.com
mta receive aliases 15.80.8.107
mta receive maximum-recipients 100
call-history-mib retain-timer 500
call-history-mib max-size 500
!
controller T1 3/0
framing esf
linecode b8zs
pri-group timeslots 1-24
! 
!
interface FastEthernet0/0
ip address 15.80.8.107 255.255.255.0
! 
interface Serial3/0:23
no ip address
isdn switch-type primary-5ess
isdn incoming-voice modem
!
interface Async1/00
no ip address
!
interface Async1/107
no ip address
!
interface Group-Async0
no ip address
no group-range
!
ip classless
ip route 0.0.0.0 0.0.0.0 15.80.8.1
no ip http server
ip pim bidir-enable
!
!
call rsvp-sync
!
call application voice offramp tftp://172.18.106.10/fax/offramp/app_libretto_offramp.2.0.1.1.tcl
! 
voice-port 3/0:D
!
!
mgcp profile default
!
dial-peer voice 9813182 pots
incoming called-number 9813182
destination-pattern 9[2-9]......
direct-inward-dial
port 3/0:D
forward-digits all
!
dial-peer voice 1 mmoip
application offramp
incoming called-number 9.......
information-type fax
!
!
line con 0
exec-timeout 0 0
line aux 0
line vty 0 4
password ww
login
line 1/00 1/107
no flush-at-activation
modem InOut
!
scheduler allocate 10000 400
ntp clock-period 17179848
ntp server 172.18.106.15
end

vdtl-5350-8a#

故障排除

本文档是T.37 OnRamp传真的继续。本文档中列出的大多数命令参考也用于OffRamp传真。有关详细信息，请参阅该文档。

调试失败

以下是不成功传真呼叫的debug命令输出日志。此debug 命令在Cisco 5350网关上发出，该网关在本示例中充当网络的OffRamp传真网关。

vdtl-5350-8a# debug mta receive all
All email receive debugging is on
vdtl-5350-8a#
Mar 26 12:15:02.372: esmtp_server_work: calling ehlo 
Mar 26 12:15:02.780: esmtp_server_work: calling mail 
Mar 26 12:15:03.280: esmtp_server_work: calling rcpt 
Mar 26 12:15:03.780: esmtp_server_work: calling data 
Mar 26 12:15:04.280: (S)R: 'Received: from andyw2k ([172.18.106.183]) by
 vnt-smtp.testlab-t37.com with Microsoft SMTPSVC(5.0.2195.4453);'
Mar 26 12:15:04.280: (S)R: ' Tue, 26 Mar 2002 12:13:50 -0500'
Mar 26 12:15:04.280: (S)R: 'Message-ID: <000301c1d4e9$c3a937c0$b76a12ac@amer.cisco.com>'
Mar 26 12:15:04.280: (S)R: 'From: "Andy" <andy@testlab-t37.com>'
Mar 26 12:15:04.280: (S)R: 'To: <FAX=98915510@vdtl-5350-8a.testlab-t37.com>'
Mar 26 12:15:04.280: (S)R: 'Subject: test email with WinFax Pro...'
Mar 26 12:15:04.284: (S)R: 'MIME-Version: 1.0'
Mar 26 12:15:04.284: (S)R: 'Content-Type: multipart/mixed;'
Mar 26 12:15:04.284: (S)R: ' boundary="/en/US/docs/net_mgmt/wan_service_administrator/1.1/administrator/guide/getstart.html=_NextPart_000_0000_01C1D4BF.DABAC5C0"'
Mar 26 12:15:04.284: (S)R: 'X-Mailer: Microsoft Outlook Express 6.00.2600.0000'
Mar 26 12:15:04.284: (S)R: 'X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000'
Mar 26 12:15:04.284: (S)R: 'Return-Path: andy@testlab-t37.com'
Mar 26 12:15:04.284: (S)R: 'X-OriginalArrivalTime: 26 Mar 2002 17:13:50.0153 (UTC)
 FILETIME=[98F1B390:01C1D4E9]'
Mar 26 12:15:04.284: (S)R: 'Date: 26 Mar 2002 12:13:50 -0500'
Mar 26 12:15:04.284: (S)R: ''
Mar 26 12:15:04.284: esmtp_server_engine_new_part: Field name : message-id:
 Field Value : <000301c1d4e9$c3a937c0$b76a12ac@amer.cisco.com> 
Field name : from: Field Value : "Andy" <andy@testlab-t37.com> 
Field name : to: Field Value : <FAX=98915510@vdtl-5350-8a.testlab-t37.com> 
Field name : subject: Field Value : test email with WinFax Pro... 
Field name : Content-Type: Field Value : multipart/mixed;
 boundary="/en/US/docs/net_mgmt/wan_service_administrator/1.1/administrator/guide/getstart.html=_NextPart_000_0000_01C1D4BF.DABAC5C0" 
Field name : date: Field Value : 26 Mar 2002 12:13:50 -0500
Mar 26 12:15:04.284: (S)R: 'Content-Type: text/plain;'
Mar 26 12:15:04.284: (S)R: ' charset="iso-8859-1"'
Mar 26 12:15:04.284: (S)R: 'Content-Transfer-Encoding: quoted-printable'
Mar 26 12:15:04.284: (S)R: ''
Mar 26 12:15:04.284: esmtp_server_engine_new_part: Field name : Content-Type:
 Field Value : text/plain; charset="iso-8859-1" 
Field name : Content-Transfer-Encoding: Field Value : quoted-printable
Mar 26 12:15:04.284: esmtp_server_work: freeing temp header
Mar 26 12:15:04.284: (S)R: 'Content-Type: application/x-msdownload;'
Mar 26 12:15:04.284: (S)R: ' name="FAX2B.exe"'
Mar 26 12:15:04.284: (S)R: 'Content-Transfer-Encoding: base64'
Mar 26 12:15:04.284: (S)R: 'Content-Disposition: attachment;'
Mar 26 12:15:04.284: (S)R: ' filename="FAX2B.exe"'
Mar 26 12:15:04.284: (S)R: ''
Mar 26 12:15:04.284: esmtp_server_engine_new_part: Field name : Content-Type:
 Field Value : application/x-msdownload; name="FAX2B.exe" 
Field name : Content-Transfer-Encoding: Field Value : base64
Mar 26 12:15:04.284: esmtp_server_work: freeing temp header
Mar 26 12:15:04.288: esmtp_server_work: Unrecognized/handled MIME content
 type rejected
Mar 26 12:15:04.600: (S)R: ''
Mar 26 12:15:04.600: esmtp_server_engine_new_part: 
Mar 26 12:15:04.600: esmtp_server_work: freeing temp header
Mar 26 12:15:04.600: esmtp_server_dot_check: Found the terminating Dot!
Mar 26 12:15:04.600: rejectMessage: 
Mar 26 12:15:22.052: esmtp_server_engine_update_recipient_status: status=7
Mar 26 12:16:09.156: esmtp_server_engine_get_statistics: ctx=0x6363AA38,
 smtpStatus=14
Mar 26 12:16:09.156: esmtp_server_engine_update_recipient_status: status=24
Mar 26 12:16:19.600: esmtp_server_engine_generate_notification: 
Mar 26 12:16:20.264: esmtp_server_work: calling quit 
Mar 26 12:16:20.264: esmtp_server_closesocket: esmtp_server: closing socket 1
Mar 26 12:16:20.264: esmtp_server_engine_clear_state: 
Mar 26 12:16:20.264: freeing RECIPIENT context
 (envelope=FAX=98915510@vdtl-5350-8a.testlab-t37.com)
Mar 26 12:16:20.264: esmtp_server_work: Freeing SMTP ctx at 0x6363AA38
Mar 26 12:16:20.264: esmtp_server: returned from work, context freed
vdtl-5350-8a#

工作调试

以下是成功传真呼叫的debug命令输出日志。在Cisco 5350网关（本例中为OffRamp传真网关）上再次发出debug命令。

vdtl-5350-8a# debug mta receive all
All email receive debugging is on
vdtl-5350-8a#
Mar 26 11:20:17.231: esmtp_server_work: calling ehlo 
Mar 26 11:20:17.683: esmtp_server_work: calling mail 
Mar 26 11:20:18.183: esmtp_server_work: calling rcpt 
Mar 26 11:20:18.683: esmtp_server_work: calling data 
Mar 26 11:20:19.183: (S)R: 'Received: from andyw2k ([172.18.106.183]) by
 vnt-smtp.testlab-t37.com with Microsoft SMTPSVC(5.0.2195.4453);'
Mar 26 11:20:19.187: (S)R: ' Tue, 26 Mar 2002 11:19:05 -0500'
Mar 26 11:20:19.187: (S)R: 'Message-ID: <000901c1d4e2$1d55bc60$b76a12ac@amer.cisco.com>'
Mar 26 11:20:19.187: (S)R: 'Reply-To: "Andy" <andy@testlab-t37.com>'
Mar 26 11:20:19.187: (S)R: 'From: "Andy" <andy@testlab-t37.com>'
Mar 26 11:20:19.187: (S)R: 'To: <FAX=98915510@vdtl-5350-8a.testlab-t37.com>'
Mar 26 11:20:19.187: (S)R: 'Subject: Test fax '
Mar 26 11:20:19.187: (S)R: 'Date: Tue, 26 Mar 2002 11:20:16 -0500'
Mar 26 11:20:19.187: (S)R: 'MIME-Version: 1.0'
Mar 26 11:20:19.187: (S)R: 'Content-Type: multipart/mixed;'
Mar 26 11:20:19.187: (S)R: ' boundary="/en/US/docs/net_mgmt/wan_service_administrator/1.1/administrator/guide/getstart.html=_NextPart_000_0005_01C1D4B8.34737F60"'
Mar 26 11:20:19.187: (S)R: 'X-Priority: 3'
Mar 26 11:20:19.187: (S)R: 'X-MSMail-Priority: Normal'
Mar 26 11:20:19.187: (S)R: 'X-Mailer: Microsoft Outlook Express 6.00.2600.0000'
Mar 26 11:20:19.187: (S)R: 'X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000'
Mar 26 11:20:19.187: (S)R: 'Return-Path: andy@testlab-t37.com'
Mar 26 11:20:19.187: (S)R: 'X-OriginalArrivalTime: 26 Mar 2002 16:19:05.0120 (UTC)
 FILETIME=[F2E97200:01C1D4E1]'
Mar 26 11:20:19.187: (S)R: ''
Mar 26 11:20:19.187: esmtp_server_engine_new_part: Field name : message-id:
 Field Value : <000901c1d4e2$1d55bc60$b76a12ac@amer.cisco.com> 
Field name : from: Field Value : "Andy" <andy@testlab-t37.com> 
Field name : to: Field Value : <FAX=98915510@vdtl-5350-8a.testlab-t37.com> 
Field name : subject: Field Value : Test fax 
Field name : date: Field Value : Tue, 26 Mar 2002 11:20:16 -0500 
Field name : Content-Type: Field Value : multipart/mixed;
 boundary="/en/US/docs/net_mgmt/wan_service_administrator/1.1/administrator/guide/getstart.html=_NextPart_000_0005_01C1D4B8.34737F60"
Mar 26 11:20:19.187: (S)R: 'Content-Type: multipart/alternative;'
Mar 26 11:20:19.187: (S)R: ' boundary="/en/US/docs/net_mgmt/wan_service_administrator/1.1/administrator/guide/getstart.html=_NextPart_001_0006_01C1D4B8.34737F60"'
Mar 26 11:20:19.187: (S)R: ''
Mar 26 11:20:19.187: esmtp_server_engine_new_part: Field name : Content-Type:
 Field Value : multipart/alternative; boundary="/en/US/docs/net_mgmt/wan_service_administrator/1.1/administrator/guide/getstart.html=_NextPart_001_0006_01C1D4B8.34737F60"
Mar 26 11:20:19.191: esmtp_server_work: freeing temp header
Mar 26 11:20:19.191: (S)R: 'Content-Type: text/plain;'
Mar 26 11:20:19.191: (S)R: ' charset="iso-8859-1"'
Mar 26 11:20:19.191: (S)R: 'Content-Transfer-Encoding: quoted-printable'
Mar 26 11:20:19.191: (S)R: ''
Mar 26 11:20:19.191: esmtp_server_engine_new_part: Field name : Content-Type:
 Field Value : text/plain; charset="iso-8859-1" 
Field name : Content-Transfer-Encoding: Field Value : quoted-printable
Mar 26 11:20:19.191: esmtp_server_work: freeing temp header
Mar 26 11:20:19.191: (S)R: 'Content-Type: text/html;'
Mar 26 11:20:19.191: (S)R: ' charset="iso-8859-1"'
Mar 26 11:20:19.191: (S)R: 'Content-Transfer-Encoding: quoted-printable'
Mar 26 11:20:19.191: (S)R: ''
Mar 26 11:20:19.191: esmtp_server_engine_new_part: Field name : Content-Type:
 Field Value : text/html; charset="iso-8859-1" 
Field name : Content-Transfer-Encoding: Field Value : quoted-printable
Mar 26 11:20:19.191: esmtp_server_work: freeing temp header
Mar 26 11:20:19.191: (S)R: ''
Mar 26 11:20:19.191: esmtp_server_engine_new_part: 
Mar 26 11:20:19.191: esmtp_server_work: freeing temp header
Mar 26 11:20:19.191: (S)R: 'Content-Type: text/plain;'
Mar 26 11:20:19.191: (S)R: ' name="New Text Document.txt"'
Mar 26 11:20:19.191: (S)R: 'Content-Transfer-Encoding: quoted-printable'
Mar 26 11:20:19.191: (S)R: 'Content-Disposition: attachment;'
Mar 26 11:20:19.191: (S)R: ' filename="New Text Document.txt"'
Mar 26 11:20:19.191: (S)R: ''
Mar 26 11:20:19.191: esmtp_server_engine_new_part: Field name : Content-Type:
 Field Value : text/plain; name="New Text Document.txt" 
Field name : Content-Transfer-Encoding: Field Value : quoted-printable
Mar 26 11:20:19.191: esmtp_server_work: freeing temp header
Mar 26 11:20:19.195: esmtp_server_engine_update_recipient_status: status=6
Mar 26 11:20:36.295: esmtp_server_engine_update_recipient_status: status=7
Mar 26 11:20:36.347: esmtp_server_engine_update_recipient_status: status=6
Mar 26 11:21:19.975: esmtp_server_engine_update_recipient_status: status=7
Mar 26 11:21:34.195: (S)R: ''
Mar 26 11:21:34.195: esmtp_server_engine_new_part: 
Mar 26 11:21:34.195: esmtp_server_work: freeing temp header
Mar 26 11:21:34.195: esmtp_server_dot_check: Found the terminating Dot!
Mar 26 11:21:34.275: esmtp_server_engine_update_recipient_status: status=6
Mar 26 11:22:40.491: esmtp_server_engine_update_recipient_status: status=7
Mar 26 11:22:58.379: esmtp_server_engine_get_statistics: ctx=0x63624708, smtpStatus=14
Mar 26 11:22:58.379: esmtp_server_engine_update_recipient_status: status=24
Mar 26 11:23:04.195: esmtp_server_engine_generate_notification: 
Mar 26 11:23:04.699: esmtp_server_work: calling quit 
Mar 26 11:23:04.699: esmtp_server_closesocket: esmtp_server: closing socket 1
Mar 26 11:23:04.699: esmtp_server_engine_clear_state: 
Mar 26 11:23:04.699: freeing RECIPIENT context
 (envelope=FAX=98915510@vdtl-5350-8a.testlab-t37.com)
Mar 26 11:23:04.699: esmtp_server_work: Freeing SMTP ctx at 0x63624708
Mar 26 11:23:04.699: esmtp_server: returned from work, context freed
vdtl-5350-8a#
vdtl-5350-8a# debug foip off-ramp 
FOIP Off ramp faxmail debugging is on
vdtl-5350-8a#
vdtl-5350-8a#
vdtl-5350-8a#
Mar 26 11:27:57.667: lapp off: CC_EV_CALL_HANDOFF, cid(0xA7)
Mar 26 11:27:57.667: loffHandoff: called number=98915510, callid=0xA7
Mar 26 11:27:57.667: loffSetupPeer: cid1(0xA7)
Mar 26 11:27:57.667: destPat(98915510),matched(1),pref(),tag(9913182),encap(1)
Mar 26 11:27:57.759: lapp off: CC_EV_CALL_PROCEEDING, cid(0xA8)
Mar 26 11:27:57.875: lapp off: CC_EV_CALL_ALERT, cid(0xA8)
Mar 26 11:28:07.487: lapp off: CC_EV_CALL_CONNECTED, cid(0xA8)
Mar 26 11:28:07.487: st=CALL_SETTING cid(0xA7,0x0,0x0,0xA8),cfid(0x0,0x0,0x0)
Mar 26 11:28:07.487: loffConnected
Mar 26 11:28:07.487: loffFlushPeerTagQueue cid(167) peer list: (empty)
Mar 26 11:28:07.487: lapp off: CC_EV_CONF_CREATE_DONE, cid(0xA8), cid2(0xA9), cfid(0x5F)
Mar 26 11:28:07.487: st=CONFERENCING3 cid(0xA7,0x0,0xA9,0xA8),cfid(0x0,0x0,0x5F)
Mar 26 11:28:07.487: loffConfDone3
Mar 26 11:28:15.419: lapp off: CC_EV_FROM_FMSP_ON_CALL_DETAIL, cid(0xA9)
Mar 26 11:28:15.419: st=WAIT_SESS_INFO cid(0xA7,0x0,0xA9,0xA8),cfid(0x0,0x0,0x5F)
Mar 26 11:28:15.419: loffSessionInfo
Mar 26 11:28:15.419: encd=1, resl=2, spd=27, min_scan_len=0, csid= andy-pc fax
Mar 26 11:28:15.419: lapp off: CC_EV_CONF_CREATE_DONE, cid(0xA9), cid2(0xAA), cfid(0x60)
Mar 26 11:28:15.419: st=CONFERENCING2 cid(0xA7,0xAA,0xA9,0xA8),cfid(0x0,0x60,0x5F)
Mar 26 11:28:15.419: loffConfDone2
Mar 26 11:28:15.419: loff_edit_cover_page: from_personal_name: 0, []
Mar 26 11:28:15.419: loff_edit_cover_page: 0, []
Mar 26 11:28:15.419: loff_edit_cover_page: [andy@testlab-t37.com]
--------------------------------------------------------------------------------
Title: vdtl-5350-8a Offramp Cover Page

To: 98915510

From: andy@testlab-t37.com

Date: Tue, 26 Mar 2002 11:27:55 -0500 

Subject: test with a word doc attachment... 

Details: 
Received: from andyw2k ([172.18.106.183]) by vnt-smtp.testlab-t37.com with Microsoft
 SMTPSVC(5.0.2195.44 Message-ID: <001301c1d4e3$2f020210$b76a12ac@amer.cisco.com> 
Reply-To: "Andy" <andy@testlab-t37.com> 
From: 
Andy" <andy@testlab-t37.com> 
To: <FAX=98915510@vdtl-5350-8a.testlab-t37.com> 
Subject: test with a word doc attachment... 
Date: Tue, 26 Mar 2002 11:27:55 -0500 
MIME-Version: 1.0 
Content-Type: multipart/mixed; boundary
"----=_NextPart_000_000F_01C1D4B9.46214BB0" 
X-Priority: 3 
X-MSMail-Priority: Normal 
X-Mailer: Microsoft Outlook Express 6.00.2600.0000 
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 
Return-Path: andy@testlab-t37.com 
X-OriginalArrivalTime: 26 Mar 2002 16:26:43.0619 (UTC) FILETIME=[0432D730:01C1D4E3]
--------------------------------------------------------------------------------


Mar 26 11:28:15.419: lapp off: CC_EV_CONF_CREATE_DONE, cid(0xAA), cid2(0xA7),
 cfid(0x61)
Mar 26 11:28:15.419: st=CONFERENCING1 cid(0xA7,0xAA,0xA9,0xA8),cfid(0x61,0x60,0x5F)
Mar 26 11:28:15.419: loffConfDone1
Mar 26 11:28:15.451: lapp off: CC_EV_FROM_DMSP_ON_PAGE_PROCESSED, cid(0xAA):
 page number (0x1)
Mar 26 11:28:15.451: lapp off: CC_EV_GENERATE_PAGE_RSP, cid(0xAA)
Mar 26 11:28:15.451: lapp off: CC_EV_FROM_DMSP_ON_PAGE_PROCESSED, cid(0xAA):
 page number (0x2)
Mar 26 11:28:51.875: lapp off: CC_EV_CALL_DISCONNECTED, cid(0xA9)
Mar 26 11:28:51.875: cause 0x10(normal call clearing (16))
Mar 26 11:28:51.875: st=CONFERENCED cid(0xA7,0xAA,0xA9,0xA8),cfid(0x61,0x60,0x5F)
Mar 26 11:28:51.875: loffDisconnected
Mar 26 11:28:51.875: loffSetDiscCause: cause=normal call clearing (16)
Mar 26 11:28:51.875: loffRemoveConf
Mar 26 11:28:51.875: lapp off: CC_EV_CONF_DESTROY_DONE, cid(0xAA), cid2(0xA7),
 cfid(0x61)
Mar 26 11:28:51.875: st=CONF_REMOVING cid(0xA7,0xAA,0xA9,0xA8),cfid(0x61,0x60,0x5F)
Mar 26 11:28:51.875: loffConfRemoving: cfid=0x61, cnt=3
Mar 26 11:28:51.875: lapp off: CC_EV_CONF_DESTROY_DONE, cid(0xA9), cid2(0xAA),
 cfid(0x60)
Mar 26 11:28:51.879: st=CONF_REMOVING cid(0xA7,0xAA,0xA9,0xA8),cfid(0x0,0x60,0x5F)
Mar 26 11:28:51.879: loffConfRemoving: cfid=0x60, cnt=2
Mar 26 11:28:51.879: lapp off: CC_EV_CONF_DESTROY_DONE, cid(0xA8), cid2(0xA9),
 cfid(0x5F)
Mar 26 11:28:51.879: st=CONF_REMOVING cid(0xA7,0xAA,0xA9,0xA8),cfid(0x0,0x0,0x5F)
Mar 26 11:28:51.879: loffConfRemoving: cfid=0x5F, cnt=1
Mar 26 11:28:51.879: loffDisconnect4 cid=0xA8
Mar 26 11:28:54.363: loff_call_history: cid=0xA8,(0xA7,0xAA,0xA9,0xA8)
Mar 26 11:28:54.363: lapp off: CC_EV_CALL_DISCONNECT_DONE, cid(0xA8)
Mar 26 11:28:54.363: st=WAIT_DISC_DONE4 cid(0xA7,0xAA,0xA9,0xA8),cfid(0x0,0x0,0x0)
Mar 26 11:28:54.363: loffWaitDiscDone4
Mar 26 11:28:54.363: loff_call_history: cid=0xA9,(0xA7,0xAA,0xA9,0x0)
Mar 26 11:28:54.363: lapp off: CC_EV_CALL_DISCONNECT_DONE, cid(0xA9)
Mar 26 11:28:54.363: st=DISCONNECTING cid(0xA7,0xAA,0xA9,0x0),cfid(0x0,0x0,0x0)
Mar 26 11:28:54.363: loffDisconnecting
Mar 26 11:28:54.363: loff_call_history: cid=0xAA,(0xA7,0xAA,0x0,0x0)
Mar 26 11:28:54.363: lapp off: CC_EV_CALL_DISCONNECT_DONE, cid(0xAA)
Mar 26 11:28:54.363: st=DISCONNECTING cid(0xA7,0xAA,0x0,0x0),cfid(0x0,0x0,0x0)
Mar 26 11:28:54.363: loffDisconnecting
Mar 26 11:28:54.363: loff_call_history: cid=0xA7,(0xA7,0x0,0x0,0x0)
Mar 26 11:28:54.363: lapp off: CC_EV_CALL_DISCONNECT_DONE, cid(0xA7)
Mar 26 11:28:54.363: st=DISCONNECTING cid(0xA7,0x0,0x0,0x0),cfid(0x0,0x0,0x0)
Mar 26 11:28:54.363: loffDisconnecting
Mar 26 11:28:54.363: loffFinished
vdtl-5350-8a# debug fmsp send t30 
FMSP send t30 debugging is on
vdtl-5350-8a# debug fmsp receive t30 
FMSP receive t30 debugging is on
vdtl-5350-8a#
Mar 26 11:43:29.570: t30 call4Leg=173, state=4, substate=7
Mar 26 11:43:29.570: fax2_command_receive: NO_COMMAND, T1
timer is not expired
Mar 26 11:43:33.622: t30 call4Leg=173, state=4, substate=7
Mar 26 11:43:33.622: received flag of modulation:
0 
Mar 26 11:43:33.622: t30 call4Leg=173, state=4, substate=7
Mar 26 11:43:33.622: fax2_command_receive: NO_COMMAND, T1
timer is not expired
Mar 26 11:43:35.050: t30 call4Leg=173, state=4, substate=7
Mar 26 11:43:35.050: fax2_command_receive: PROCESSING
Mar 26 11:43:35.662: msg dump:FF C0 2 1E 86 66 4 C6 E B4 9E A6 36 2E 96 16 EE B6 4 4 4 4 4 
Mar 26 11:43:35.662: 
Mar 26 11:43:35.662: t30 call4Leg=173, state=4, substate=7
Mar 26 11:43:35.662: received: CSI remote id
string: andy-pc fax
Mar 26 11:43:35.662: t30 call4Leg=173, state=4, substate=7
Mar 26 11:43:35.662: fax2_command_receive: PROCESSING
Mar 26 11:43:35.930: t30 call4Leg=173, state=4, substate=7
Mar 26 11:43:35.930: fax2_command_receive: PROCESSING
Mar 26 11:43:36.198: msg dump:FF C8 1 0 76 1F 1 1 9 0 
Mar 26 11:43:36.198: 
Mar 26 11:43:36.198: t30 call4Leg=173, state=4, substate=7
Mar 26 11:43:36.198: fax2_command_receive: PROCESSING
Mar 26 11:43:36.326: t30 call4Leg=173, state=4, substate=19
Mar 26 11:43:36.326: received DIS_PACKET: BR: 9, resolution: 1,
encoding : 0, min scan line length : 0, remote_id_string: andy-pc fax 
Mar 26 11:43:36.326: t30 call4Leg=173, state=4, substate=21
Mar 26 11:43:36.330: send DCS_PACKET: BR: 9, resolution: 1,
encoding : 0, local_id_string: 
Mar 26 11:43:36.330: msg dump:FF C8 C1 0 46 1E 
Mar 26 11:43:36.330: 
Mar 26 11:43:36.330: t30 call4Leg=173, state=4, substate=24
Mar 26 11:43:36.330: fax2_response_receive: PROCESSING
Mar 26 11:43:41.834: t30 call4Leg=173, state=4, substate=24
Mar 26 11:43:41.834: received flag of modulation:
0 
Mar 26 11:43:41.834: t30 call4Leg=173, state=4, substate=24
Mar 26 11:43:41.834: fax2_response_receive: PROCESSING
Mar 26 11:43:42.670: t30 call4Leg=173, state=4, substate=24
Mar 26 11:43:42.670: fax2_response_receive: PROCESSING
Mar 26 11:43:42.750: msg dump:FF C8 21 
Mar 26 11:43:42.750: 
Mar 26 11:43:42.750: t30 call4Leg=173, state=4, substate=24
Mar 26 11:43:42.750: fax2_response_receive: PROCESSING
Mar 26 11:43:42.890: t30 call4Leg=173, state=4, substate=24
Mar 26 11:43:42.890: in response receive WAIT FOR CD
Mar 26 11:43:42.890: t30 call4Leg=173, state=4, substate=25
Mar 26 11:43:42.894: received CFR
Mar 26 11:43:49.290: t30 call4Leg=173, state=5, substate=44
Mar 26 11:43:49.290: throttling tx data, buffered data is
61
Mar 26 11:44:00.794: t30 call4Leg=173, state=6, substate=31
Mar 26 11:44:00.794: send MPS 
Mar 26 11:44:00.794: t30 call4Leg=173, state=6, substate=32
Mar 26 11:44:00.794: fax2_response_receive: PROCESSING
Mar 26 11:44:03.222: t30 call4Leg=173, state=6, substate=32
Mar 26 11:44:03.222: received flag of modulation:
0 
Mar 26 11:44:03.222: t30 call4Leg=173, state=6, substate=32
Mar 26 11:44:03.226: fax2_response_receive: PROCESSING
Mar 26 11:44:04.066: t30 call4Leg=173, state=6, substate=32
Mar 26 11:44:04.066: fax2_response_receive: PROCESSING
Mar 26 11:44:04.146: msg dump:FF C8 31 
Mar 26 11:44:04.146: 
Mar 26 11:44:04.146: t30 call4Leg=173, state=6, substate=32
Mar 26 11:44:04.146: fax2_response_receive: PROCESSING
Mar 26 11:44:04.294: t30 call4Leg=173, state=6, substate=32
Mar 26 11:44:04.294: in response receive WAIT FOR CD
Mar 26 11:44:04.294: t30 call4Leg=173, state=6, substate=33
Mar 26 11:44:04.294: received MCF 
Mar 26 11:44:32.494: t30 call4Leg=173, state=6, substate=31
Mar 26 11:44:32.494: send MPS 
Mar 26 11:44:32.494: t30 call4Leg=173, state=6, substate=32
Mar 26 11:44:32.494: fax2_response_receive: PROCESSING
Mar 26 11:44:34.950: t30 call4Leg=173, state=6, substate=32
Mar 26 11:44:34.950: received flag of modulation:
0 
Mar 26 11:44:34.950: t30 call4Leg=173, state=6, substate=32
Mar 26 11:44:34.950: fax2_response_receive: PROCESSING
Mar 26 11:44:35.786: t30 call4Leg=173, state=6, substate=32
Mar 26 11:44:35.786: fax2_response_receive: PROCESSING
Mar 26 11:44:35.870: msg dump:FF C8 31 
Mar 26 11:44:35.870: 
Mar 26 11:44:35.870: t30 call4Leg=173, state=6, substate=32
Mar 26 11:44:35.870: fax2_response_receive: PROCESSING
Mar 26 11:44:36.018: t30 call4Leg=173, state=6, substate=32
Mar 26 11:44:36.018: in response receive WAIT FOR CD
Mar 26 11:44:36.018: t30 call4Leg=173, state=6, substate=33
Mar 26 11:44:36.018: received MCF 
Mar 26 11:45:08.118: t30 call4Leg=173, state=6, substate=31
Mar 26 11:45:08.118: send MPS 
Mar 26 11:45:08.118: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:08.118: fax2_response_receive: PROCESSING
Mar 26 11:45:10.778: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:10.778: received flag of modulation:
0 
Mar 26 11:45:10.778: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:10.778: fax2_response_receive: PROCESSING
Mar 26 11:45:11.618: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:11.618: fax2_response_receive: PROCESSING
Mar 26 11:45:11.694: msg dump:FF C8 31 
Mar 26 11:45:11.694: 
Mar 26 11:45:11.694: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:11.694: fax2_response_receive: PROCESSING
Mar 26 11:45:11.846: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:11.846: in response receive WAIT FOR CD
Mar 26 11:45:11.846: t30 call4Leg=173, state=6, substate=33
Mar 26 11:45:11.846: received MCF 
Mar 26 11:45:30.550: t30 call4Leg=173, state=6, substate=31
Mar 26 11:45:30.550: send MPS 
Mar 26 11:45:30.550: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:30.550: fax2_response_receive: PROCESSING
Mar 26 11:45:33.034: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:33.034: received flag of modulation:
0 
Mar 26 11:45:33.034: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:33.034: fax2_response_receive: PROCESSING
Mar 26 11:45:33.874: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:33.874: fax2_response_receive: PROCESSING
Mar 26 11:45:33.950: msg dump:FF C8 31 
Mar 26 11:45:33.950: 
Mar 26 11:45:33.950: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:33.950: fax2_response_receive: PROCESSING
Mar 26 11:45:34.102: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:34.102: in response receive WAIT FOR CD
Mar 26 11:45:34.102: t30 call4Leg=173, state=6, substate=33
Mar 26 11:45:34.102: received MCF 
Mar 26 11:45:39.006: t30 call4Leg=173, state=5, substate=27
Mar 26 11:45:39.006: un-throttling tx data, buffered data is
6
Mar 26 11:45:39.206: t30 call4Leg=173, state=6, substate=31
Mar 26 11:45:39.206: send MPS 
Mar 26 11:45:39.206: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:39.206: fax2_response_receive: PROCESSING
Mar 26 11:45:41.634: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:41.634: received flag of modulation:
0 
Mar 26 11:45:41.634: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:41.634: fax2_response_receive: PROCESSING
Mar 26 11:45:42.470: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:42.470: fax2_response_receive: PROCESSING
Mar 26 11:45:42.554: msg dump:FF C8 31 
Mar 26 11:45:42.554: 
Mar 26 11:45:42.554: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:42.554: fax2_response_receive: PROCESSING
Mar 26 11:45:42.702: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:42.702: in response receive WAIT FOR CD
Mar 26 11:45:42.702: t30 call4Leg=173, state=6, substate=33
Mar 26 11:45:42.702: received MCF 
Mar 26 11:45:47.602: t30 call4Leg=173, state=6, substate=31
Mar 26 11:45:47.602: send EOP 
Mar 26 11:45:47.602: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:47.602: fax2_response_receive: PROCESSING
Mar 26 11:45:50.022: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:50.022: received flag of modulation:
0 
Mar 26 11:45:50.022: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:50.022: fax2_response_receive: PROCESSING
Mar 26 11:45:50.866: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:50.866: fax2_response_receive: PROCESSING
Mar 26 11:45:50.942: msg dump:FF C8 31 
Mar 26 11:45:50.942: 
Mar 26 11:45:50.946: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:50.946: fax2_response_receive: PROCESSING
Mar 26 11:45:51.094: t30 call4Leg=173, state=6, substate=32
Mar 26 11:45:51.098: in response receive WAIT FOR CD
Mar 26 11:45:51.098: t30 call4Leg=173, state=6, substate=33
Mar 26 11:45:51.098: received MCF 
Mar 26 11:45:51.098: t30 call4Leg=173, state=7, substate=37
Mar 26 11:45:51.098: send DCN_PACKET
Mar 26 11:45:51.098: t30 call4Leg=173, state=0, substate=0
Mar 26 11:45:51.098: terminating with hang-up status: 0 
vdtl-5350-8a#

相关信息

此文档是否有帮助?

Feedback反馈

联系我们

本文档适用于以下产品