更换Nexus 9236C主干交换机 — CPS
简介
本文档介绍在托管思科策略套件(CPS)虚拟网络功能(VNF)的Ultra-M设置中更换故障主干交换机(Nexus 9236C)所需的步骤。
背景信息
Ultra-M是预打包和验证的虚拟化移动数据包核心解决方案，旨在简化VNF的部署。Ultra-M设置中的服务器连接到三种不同类型的交换机：
- Catalyst 交换机
- 枝叶交换机
- 主干交换机
Ultra-M设置的网络拓扑如下图所示：
UltraM网络拓扑
缩写
| VNF | 虚拟网络功能 |
| 主干 | Nexus 9236C交换机作为主干 |
| MOP | 程序方法 |
| LAN | 局域网 |
| FTP | 文件传输协议 |
| TFTP | 简单文件传输协议 (TFTP) |
| CIMC | 思科集成管理控制器 |
| 调试输出中显示“BGP | 边界网关协议 |
| BFD | 双向转发检测 |
MoP的工作流
更换过程的高级工作流
Ultra-M设置中的主干交换机
先决条件
使用ftp/tftp从主干交换机备份配置文件，然后继续进行交换机更换，如下所示。
Nexus-POD1-spine2# copy running-config sftp:
Enter destination filename: [Nexus-POD1-spine2-running-config] backup-spine-cfg-2
Enter vrf (If no input, current vrf 'default' is considered): management
Enter hostname for the sftp server: 10.1.1.1
Enter username: admin
The authenticity of host '10.1.1.1 (10.1.1.1)' can't be established.
RSA key fingerprint is SHA256:fnbUmd2mL5yE94zxrRoKAlvYfQbheXJfQox7m3XfpIU.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '10.1.1.1' (RSA) to the list of known hosts.
User Access Verification
Password:
Connected to 10.1.1.1.
sftp> put /var/tmp/vsh/backup-spine-cfg-2 backup-spine-cfg-2
Uploading /var/tmp/vsh/backup-spine-cfg-2 to /backup-spine-cfg-2
/var/tmp/vsh/backup-spine-cfg-2 100% 33KB 33.2KB/s 00:00
sftp> exit
Copy complete, now saving to disk (please wait)...
Copy complete.
Nexus-POD1-spine2#
运行状况检查
1.检查交换机中运行的当前软件版本，并记录下来，如下所示。
Nexus-POD1-spine2# show ver
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (C) 2002-2018, Cisco and/or its affiliates.
All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under their own
licenses, such as open source. This software is provided "as is," and unless
otherwise stated, there is no warranty, express or implied, including but not
limited to warranties of merchantability and fitness for a particular purpose.
Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or
GNU General Public License (GPL) version 3.0 or the GNU
Lesser General Public License (LGPL) Version 2.1 or
Lesser General Public License (LGPL) Version 2.0.
A copy of each such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://opensource.org/licenses/gpl-3.0.html and
http://www.opensource.org/licenses/lgpl-2.1.php and
http://www.gnu.org/licenses/old-licenses/library.txt.
Software
BIOS: version 07.59
NXOS: version 7.0(3)I7(3)
BIOS compile time: 08/26/2016
NXOS image file is: bootflash:///nxos.7.0.3.I7.3.bin
NXOS compile time: 2/12/2018 13:00:00 [02/12/2018 19:13:48]
Hardware
cisco Nexus9000 C9236C chassis
Intel(R) Xeon(R) CPU @ 1.80GHz with 16400560 kB of memory.
Processor Board ID FDO21120SSN
Device name: Nexus-POD1-spine2
bootflash: 53298520 kB
Kernel uptime is 108 day(s), 13 hour(s), 15 minute(s), 12 second(s)
Last reset
Reason: Unknown
System version: 7.0(3)I7(3)
Service:
plugin
Core Plugin, Ethernet Plugin
Active Package(s):
2.检查当前许可证的使用情况。
Nexus-POD1-spine2# show license usage
Feature Ins Lic Status Expiry Date Comments
Count
--------------------------------------------------------------------------------
N9K_LIC_1G No - Unused -
VPN_FABRIC No - Unused -
FCOE_NPV_PKG No - Unused -
SECURITY_PKG No 0 Unused -
N9K_UPG_EX_10G No - Unused -
TP_SERVICES_PKG No - Unused -
NXOS_ADVANTAGE_GF No - Unused -
NXOS_ADVANTAGE_M4 No - Unused -
NXOS_ADVANTAGE_XF No - Unused -
NXOS_ESSENTIALS_GF No - Unused -
NXOS_ESSENTIALS_M4 No - Unused -
NXOS_ESSENTIALS_XF No - Unused -
SAN_ENTERPRISE_PKG No - Unused -
PORT_ACTIVATION_PKG No 0 Unused -
NETWORK_SERVICES_PKG No - Unused -
NXOS_ADVANTAGE_M8-16 No - Unused -
NXOS_ESSENTIALS_M8-16 No - Unused -
FC_PORT_ACTIVATION_PKG No 0 Unused -
LAN_ENTERPRISE_SERVICES_PKG Yes - In use Never -
--------------------------------------------------------------------------------
3.确保连接到交换机端口通道、VLAN和端口状态的物理电缆正常。
Nexus-POD1-spine2# show interface status | grep connected
mgmt0 -- connected routed full 100 --
Eth1/1 -- connected trunk full 100G QSFP-100G-AOC5M
Eth1/2 -- connected trunk full 100G QSFP-100G-AOC5M
Eth1/5 -- connected trunk full 100G QSFP-100G-AOC5M
Eth1/6 -- connected trunk full 100G QSFP-100G-AOC5M
Eth1/11/1 Connected to NMNET connected 101 full 10G QSFP-40G-SR4
Eth1/21/1 -- connected routed full 10G QSFP-40G-SR4
Eth1/21/2 -- connected routed full 10G QSFP-40G-SR4
Eth1/21/3 -- connected routed full 10G QSFP-40G-SR4
Eth1/21/4 -- connected routed full 10G QSFP-40G-SR4
Eth1/22/1 -- connected routed full 10G QSFP-40G-SR4
Eth1/22/2 -- connected routed full 10G QSFP-40G-SR4
Eth1/22/3 -- connected routed full 10G QSFP-40G-SR4
Eth1/22/4 -- connected routed full 10G QSFP-40G-SR4
Eth1/23/1 -- connected routed full 10G QSFP-40G-SR4
Eth1/23/2 -- connected routed full 10G QSFP-40G-SR4
Eth1/23/3 -- connected routed full 10G QSFP-40G-SR4
Eth1/23/4 -- connected routed full 10G QSFP-40G-SR4
Eth1/29 "spine-spine link" connected trunk full 100G QSFP-100G-AOC5M
Eth1/30 "spine-spine link" connected trunk full 100G QSFP-100G-AOC5M
Eth1/31 "spine-spine link" connected trunk full 100G QSFP-100G-AOC5M
Po22 portchannel to Lea connected trunk full 100G --
Po24 portchannel to Lea connected trunk full 100G --
Po30 -- connected routed full 10G --
Po30.3201 -- connected routed full 10G --
Po30.3202 -- connected routed full 10G --
Po30.3203 -- connected routed full 10G --
Po30.3204 -- connected routed full 10G --
Po30.3205 -- connected routed full 10G --
Po30.3206 -- connected routed full 10G --
Po99 spine1-spine2 connected trunk full 100G --
Lo1 -- connected routed auto auto --
Lo2 -- connected routed auto auto --
Lo3 -- connected routed auto auto --
Lo4 -- connected routed auto auto --
Lo5 -- connected routed auto auto --
Vlan2601 Global VRF spine-2 connected routed auto auto --
Vlan2602 GI VRF spine-2 <-> connected routed auto auto --
Vlan2603 IPV6SUB VRF spine- connected routed auto auto --
Vlan2604 METROE-E VRF spine connected routed auto auto --
Vlan2605 NMNET VRF spine-2 connected routed auto auto --
Vlan2721 Global VRF spine-2 connected routed auto auto --
Vlan2722 GI VRF spine-2 <-> connected routed auto auto --
Vlan2723 IPV6SUB VRF spine- connected routed auto auto --
Vlan2724 METROE-E VRF spine connected routed auto auto --
Vlan2741 Global VRF spine-2 connected routed auto auto --
Vlan2742 GI VRF spine-2 <-> connected routed auto auto --
Vlan2743 IPV6SUB VRF spine- connected routed auto auto --
Vlan2744 METROE-E VRF spine connected routed auto auto --
4.确保边界网关协议(BGP)邻居已启用。
Nexus-POD1-spine2# show ip bgp summary vrf all
BGP summary information for VRF GI, address family IPv4 Unicast
BGP router identifier 10.0.202.2, local AS number 65145
BGP table version is 28, IPv4 Unicast config peers 4, capable peers 4
1 network entries and 1 paths using 236 bytes of memory
BGP attribute entries [1/160], BGP AS path entries [1/6]
BGP community entries [0/0], BGP clusterlist entries [0/0]
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
10.0.92.1 4 65145 312621 312617 28 0 0 15w3d 1
10.0.122.2 4 65251 312624 312616 28 0 0 15w3d 0
10.0.142.2 4 65252 312623 312617 28 0 0 15w3d 0
10.178.240.185 4 65137 312618 312616 28 0 0 12w0d 0
BGP summary information for VRF IPV6SUB, address family IPv4 Unicast
BGP summary information for VRF METROE-E, address family IPv4 Unicast
BGP router identifier 10.0.202.4, local AS number 65145
BGP table version is 10, IPv4 Unicast config peers 4, capable peers 4
1 network entries and 1 paths using 236 bytes of memory
BGP attribute entries [1/160], BGP AS path entries [1/6]
BGP community entries [0/0], BGP clusterlist entries [0/0]
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
10.0.94.1 4 65145 312619 312617 10 0 0 15w3d 1
10.0.124.2 4 65251 312623 312616 10 0 0 15w3d 0
10.0.144.2 4 65252 312618 312617 10 0 0 15w3d 0
10.178.240.181 4 65137 312618 312616 10 0 0 12w0d 0
BGP summary information for VRF NMNET, address family IPv4 Unicast
BGP router identifier 10.0.202.5, local AS number 65145
BGP table version is 3, IPv4 Unicast config peers 1, capable peers 1
1 network entries and 1 paths using 236 bytes of memory
BGP attribute entries [1/160], BGP AS path entries [0/0]
BGP community entries [0/0], BGP clusterlist entries [0/0]
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
10.0.95.1 4 65145 312616 312616 3 0 0 15w3d 1
BGP summary information for VRF default, address family IPv4 Unicast
BGP router identifier 10.0.202.1, local AS number 65145
BGP table version is 261, IPv4 Unicast config peers 4, capable peers 3
35 network entries and 49 paths using 10108 bytes of memory
BGP attribute entries [5/800], BGP AS path entries [3/22]
BGP community entries [0/0], BGP clusterlist entries [0/0]
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
10.0.91.1 4 65145 312681 312635 261 0 0 15w3d 35
10.0.121.2 4 65251 312629 312630 261 0 0 15w3d 0
10.0.141.2 4 65252 312683 312620 261 0 0 15w3d 14
10.178.240.177 4 65137 0 124577 0 0 0 15w3d 12
Nexus-POD1-spine2# show ipv6 bgp summary vrf all
BGP summary information for VRF GI, address family IPv6 Unicast
BGP router identifier 10.0.202.2, local AS number 65145
BGP table version is 64, IPv6 Unicast config peers 4, capable peers 4
1 network entries and 1 paths using 248 bytes of memory
BGP attribute entries [1/160], BGP AS path entries [1/6]
BGP community entries [0/0], BGP clusterlist entries [0/0]
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
fc00:420:81:122::2
4 65251 312637 312629 64 0 0 15w3d 0
fc00:420:81:142::2
4 65252 312637 312630 64 0 0 15w3d 0
fc00:420:81:992::1
4 65145 312635 312630 64 0 0 15w3d 1
fd01:976a:c002:1:4d13:36f3:0:22
4 65137 312631 312627 64 0 0 12w0d 0
BGP summary information for VRF IPV6SUB, address family IPv6 Unicast
BGP router identifier 10.0.202.3, local AS number 65145
BGP table version is 44, IPv6 Unicast config peers 4, capable peers 4
0 network entries and 0 paths using 0 bytes of memory
BGP attribute entries [0/0], BGP AS path entries [0/0]
BGP community entries [0/0], BGP clusterlist entries [0/0]
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
fc00:420:81:123::2
4 65251 312632 312629 44 0 0 15w3d 0
fc00:420:81:143::2
4 65252 312636 312629 44 0 0 15w3d 0
fc00:420:81:993::1
4 65145 312631 312629 44 0 0 15w3d 0
fd01:976a:c002:1:4d13:36f3:0:24
4 65137 312629 312628 44 0 0 12w0d 0
BGP summary information for VRF METROE-E, address family IPv6 Unicast
BGP summary information for VRF NMNET, address family IPv6 Unicast
BGP summary information for VRF default, address family IPv6 Unicast
5.确保双向转发检测(BFD)邻居状态为Up。
Nexus-POD1-spine2# show bfd neighbors vrf al
OurAddr NeighAddr LD/RD RH/RS Holdown(mult) State Int Vrf
10.0.124.1 10.0.124.2 1090519045/1090519205 Up 672(3) Up Vlan2724 METROE-E
10.0.122.1 10.0.122.2 1090519046/1090519206 Up 639(3) Up Vlan2722 GI
10.0.92.2 10.0.92.1 1090519050/1090519094 Up 585(3) Up Vlan2602 GI
10.0.95.2 10.0.95.1 1090519051/1090519095 Up 585(3) Up Vlan2605 NMNET
10.0.121.1 10.0.121.2 1090519052/1090519208 Up 639(3) Up Vlan2721 default
10.0.94.2 10.0.94.1 1090519054/1090519097 Up 585(3) Up Vlan2604 METROE-E
10.0.91.2 10.0.91.1 1090519055/0 Up N/A(3) Up Vlan2601 default
10.0.141.1 10.0.141.2 1090519056/1090519212 Up 610(3) Up Vlan2741 default
10.0.144.1 10.0.144.2 1090519057/1090519213 Up 610(3) Up Vlan2744 METROE-E
10.0.142.1 10.0.142.2 1090519059/1090519214 Up 610(3) Up Vlan2742 GI
10.178.240.182 10.178.240.181 1090519061/0 UP N/A(3) Up Po30.3202 METROE-E
10.178.240.186 10.178.240.185 1090519062/0 Up N/A(3) Up Po30.3203 GI
Nexus-POD1-spine2#
Nexus-POD1-spine2# show bfd ipv6 neighbor vrf all
OurAddr NeighAddr
LD/RD RH/RS Holdown(mult) State Int Vrf
fc00:420:81:123::1 fc00:420:81:123::2
1090519044/1090519204 Up 615(3) Up Vlan2723 IPV6SUB
fc00:420:81:122::1 fc00:420:81:122::2
1090519047/1090519207 Up 731(3) Up Vlan2722 GI
fc00:420:81:142::1 fc00:420:81:142::2
1090519048/1090519210 Up 696(3) Up Vlan2742 GI
fc00:420:81:143::1 fc00:420:81:143::2
1090519049/1090519211 Up 696(3) Up Vlan2743 IPV6SUB
fc00:420:81:993::2 fc00:420:81:993::1
1090519053/1090519096 Up 544(3) Up Vlan2603 IPV6SUB
fc00:420:81:992::2 fc00:420:81:992::1
1090519058/1090519099 Up 544(3) Up Vlan2602 GI
交换机更换步骤
1.将新交换机安装到机架中，并按照说明将电缆连接到交换机。交换机安装步骤可在以下位置找到：主干Nexus 236C NX-OS模式交换机硬件安装指南
2.根据以下链接检查Nexus主干交换机的软件版本并升级/降级到软件版本： Cisco Nexus 9000系列NX-OS软件升级和降级指南，版本7.x
3.将配置备份传输到新交换机，并将该配置复制到启动配置。
server-backup$ sftp admin@10.1.1.1
The authenticity of host '10.1.1.1 (10.1.1.1)' can't be established.
RSA key fingerprint is SHA256:fnbUmd2mL5yE94zxrRoKAlvYfQbheXJfQox7m3XfpIU.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '10.1.1.1' (RSA) to the list of known hosts.
User Access Verification
Password:
Password:
Connected to 10.1.1.1.
sftp> ls
20170607_193430_poap_15489_1.log 20170607_193430_poap_15489_2.log 20170607_193430_poap_15489_init.log backup-spine-cfg-2 backup-spine.cfg
backup_run_02152018 bios_daemon.dbg cfg-july25th cfg-july25th-spine1 flash:
flash:cfg-aug8th-ybattina-afterNSO flash:cfg-jul28th home l3-cfg-aug10th license_FDO211406K1_16.lic
lost+found nxos.7.0.3.I4.4.bin nxos.7.0.3.I5.2.bin nxos.7.0.3.I7.3.bin platform-sdk.cmd
scripts spine-config-bkp starat virtual-instance vlan.dat 100% 33KB 21.7KB/s 00:01
sftp> put backup-spine-cfg-2
Uploading backup-spine-cfg-2 to /backup-spine-cfg-2
backup-spine-cfg-2 100% 33KB 23.5KB/s 00:01
sftp> bye
Nexus-spine1# copy bootflash:///backup-spine-cfg-2 startup-config
Copy progress 100% 33KB
Copy complete, now saving to disk (please wait)...
Copy complete.
4.加载备份配置后重新加载交换机。
Nexus-POD1-spine2#reload
验证更换的主干交换机
在交换机可供访问后，在主干交换机上使用这些命令执行运行状况检查，以验证更换的交换机是否处于预期状态。
Nexus-POD1-spine2# show port-channel summary
Nexus-POD1-spine2# show ip bgp summary vrf all
Nexus-POD1-spine2# show ipv6 bgp summary vrf all
Nexus-POD1-spine2# show bfd neighbor vrf all
Nexus-POD1-spine2# show bfd ipv6 neighbor vrf all
反馈