Cisco Unified Communications Manager 节点的更改后任务
执行所有更改后任务,以确保更改在部署中正确实施。
小心 |
如果执行这些任务时没有收到预期的结果,请先妥善解决问题,然后再继续。 |
过程
步骤 1 |
如果在 Cisco Unified Communications Manager 服务器上的任何位置配置了 DNS,请确保已配置正向和反向查找区域,并且 DNS 可访问且在正常工作。 |
||
步骤 2 |
检查活动的服务器关机警告,确保群集中的所有服务器都在运行并可用。使用 Cisco Unified 实时监控工具 (RTMT) 或在第一个节点上使用命令行界面 (CLI) 进行检查。 |
||
步骤 3 |
检查群集中所有节点的数据库复制状态,确保所有服务器均已成功复制数据库更改。 对于 IM and Presence Service,如果您的部署中有多个节点,请使用 CLI 检查数据库发布方节点上的数据库复制状态。 请使用 Unified RTMT 或 CLI。所有节点的状态应显示为 2。 |
||
步骤 4 |
如以下示例中所示输入 CLI 命令 示例:admin: utils diagnose module validate_network Log file: /var/log/active/platform/log/diag1.log Starting diagnostic test(s) =========================== test - validate_network : Passed Diagnostics Completed admin: 如果执行的是更改前系统运行状况检查,则任务已完成;否则,继续执行更改后验证步骤。 |
||
步骤 5 |
验证新的主机名或 IP 地址是出现在 Cisco Unified Communications Manager 服务器列表中。在 Cisco Unified Communications Manager 管理中,选择 。
|
||
步骤 6 |
验证是否在网络中完全实施了对 IP 地址、主机名或两者的更改。在群集中的每个节点上输入 CLI 命令
输出应包含节点的新 IP 地址或主机名。 示例:admin:show network cluster 10.63.70.125 hippo2.burren.pst hippo2 Subscriber cups DBPub authenticated 10.63.70.48 aligator.burren.pst aligator Publisher callmanager DBPub authenticated using TCP since Wed May 29 17:44:48 2013 |
||
步骤 7 |
验证主机名的更改是否已在网络中完全实施。在群集中的每个节点上输入 CLI 命令
输出应确认新的主机名在本地和外部解析为 IP 地址。 示例:admin:utils network host hippo2 Local Resolution: hippo2.burren.pst resolves locally to 10.63.70.125 External Resolution: hippo2.burren.pst has address 10.63.70.125 tasks. |
||
步骤 8 |
对于启用安全性的群集(群集安全模式 1 - 混合),更新 CTL 文件,然后重新启动群集中的所有节点,再执行系统运行状况检查和其他更改后任务。 有关详细信息,请参阅多服务器群集电话的证书和 ITL 重新生成部分。 |
||
步骤 9 |
如果您使用证书信任列表 (CTL) 文件和 USB 电子令牌启用了群集安全性,必须在更改 8.0 或更高版本节点的 IP 地址或主机名后,重新生成初始信任列表 (ITL) 文件和 ITL 中的证书。如果没有使用证书信任列表 (CTL) 文件和 USB 电子令牌启用群集安全性,则跳过此步骤。 |
||
步骤 10 |
运行手动 DRS 备份并确保成功备份所有节点和活动服务。 有关详细信息,请参阅《Cisco Unified Communications Manager 管理指南》。
|
||
步骤 11 |
更新所有相关的 IP 电话 URL 参数。 |
||
步骤 12 |
使用 Cisco Unified Communications Manager 管理更新所有相关的 IP 电话服务。选择 。 |
||
步骤 13 |
更新 Unified RTMT 自定义警告和保存的配置文件。
|
||
步骤 14 |
如果使用的是 Cisco Unified Communications Manager 上运行的集成式 DHCP 服务器,请更新该 DHCP 服务器。 |
||
步骤 15 |
检查并对其他关联的 Cisco Unified Communications 组件进行所需的配置更改。
|