在Cisco IOS?/IOS-XE路由器上配置TCP攔截

簡介

本檔案介紹在Cisco IOS®/IOS-XE路由器上啟用思科傳輸控制通訊協定(TCP)攔截功能的需求。需要TCP攔截來保護TCP伺服器免受TCP同步(SYN)泛洪攻擊（一種拒絕服務攻擊）。

必要條件

需求

本文件沒有特定需求。

採用元件

本文件所述內容不限於特定軟體和硬體版本。

本文中的資訊是根據特定實驗室環境內的裝置所建立。文中使用到的所有裝置皆從已清除（預設）的組態來啟動。如果您的網路運作中，請確保您瞭解任何指令可能造成的影響。

問題

您無法在ISR G1/G2/G3和ASR1k路由器上配置「ip tcp intercept」。您可以在此處檢視日誌：

• 適用於ISR G1路由器

Router#show ver

Cisco IOS® Software, 2800 Software (C2800NM-IPBASEK9-M), Version 15.1(4)M12a, RELEASE SOFTWARE (fc1)
Router uptime is 14 minutes
System returned to ROM by reload at 07:45:56 UTC Tue Nov 1 2016
System image file is "flash:c2800nm-ipbasek9-mz.151-4.M12a(1).bin"


Last reload type: Normal Reload


<omitted>

Cisco 2811 (revision 1.0) with 512000K/12288K bytes of memory.
Processor board ID FHK1404F3U8
2 FastEthernet interfaces
1 Channelized E1/PRI port
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
250368K bytes of ATA CompactFlash (Read/Write)

 

License Info:


License UDI:

-------------------------------------------------
Device#   PID                 SN
-------------------------------------------------
*0       CISCO2811             FHK1404F3U8   

Configuration register is 0x2102

 

Router#    config t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#ip tcp ?
  RST-count           Configure RST throttle count
  async-mobility      Configure async-mobility
  chunk-size          TCP chunk size
  ecn                 Enable Explicit Congestion Notification
  mss                 TCP initial maximum segment size
  path-mtu-discovery  Enable path-MTU discovery on new TCP connections
  queuemax            Maximum queue of outgoing TCP packets
  selective-ack       Enable TCP selective-ACK
  synwait-time        Set time to wait on new TCP connections
  timestamp           Enable TCP timestamp option
  window-size         TCP window size

 

• 適用於ISR G2路由器

Router#show ver

Cisco IOS® Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.4(3)M4, RELEASE SOFTWARE (fc1)

<omitted>

Router uptime is 1 minute
System returned to ROM by reload at 10:28:40 UTC Mon Oct 31 2016
System image file is "flash:c1900-universalk9-mz.SPA.154-3.M4.bin"
Last reload type: Normal Reload
Last reload reason: Reload Command

<omitted>

Cisco CISCO1941/K9 (revision 1.0) with 2543552K/77824K bytes of memory.
Processor board ID FHK141571QW
4 FastEthernet interfaces

<omitted>

Technology Package License Information for Module:'c1900'

 
------------------------------------------------------------------------
Technology    Technology-package                  Technology-package
              Current              Type           Next reboot 
------------------------------------------------------------------------
ipbase        ipbasek9             Permanent      ipbasek9
security      securityk9           RightToUse     securityk9
data          None                 None           None          
NtwkEss       None                 None           None


Configuration register is 0x2102


Router#    config t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#ip tcp ?
  RST-count           Configure RST throttle count
  async-mobility      Configure async-mobility
  chunk-size          TCP chunk size
  ecn                 Enable Explicit Congestion Notification
  keepalive           Configure TCP Keepalive parameters
  mss                 TCP initial maximum segment size
  path-mtu-discovery  Enable path-MTU discovery on new TCP connections
  queuemax            Maximum queue of outgoing TCP packets
  selective-ack       Enable TCP selective-ACK
  synwait-time        Set time to wait on new TCP connections
  timestamp           Enable TCP timestamp option
  window-size         TCP window size

• 適用於ISR G3路由器

Router#sh ver

Cisco IOS® XE Software, Version 03.15.02.S - Standard Support Release
Cisco IOS® Software, ISR Software (X86_64_LINUX_IOS® D-UNIVERSALK9-M), Version 15.5(2)S2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2015 by Cisco Systems, Inc.
Compiled Fri 16-Oct-15 18:00 by mcpre

<omitted>

Router uptime is 7 minutes
Uptime for this control processor is 8 minutes
System returned to ROM by reload
System image file is "bootflash:isr4300-universalk9.03.15.02.S.155-2.S2-std.SPA.bin"
Last reload reason: Reload Command

<omitted>

Technology Package License Information: 

-----------------------------------------------------------------
Technology    Technology-package           Technology-package
              Current       Type           Next reboot 
------------------------------------------------------------------
appx             None             None             None            
uc               uck9             Permanent        uck9
security         securityk9       EvalRightToUse   securityk9
ipbase           ipbasek9         Permanent        ipbasek9

 

cisco ISR4331/K9 (1RU) processor with 1665776K/6147K bytes of memory.
Processor board ID FDO2012A0AT
3 Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
3223551K bytes of flash memory at bootflash:.


Configuration register is 0x2102

 

Router#    config t

Enter configuration commands, one per line.  End with CNTL/Z.


Router(config)#ip tcp ?
  RST-count           Configure RST throttle count
  async-mobility      Configure async-mobility
  chunk-size          TCP chunk size
  ecn                 Enable Explicit Congestion Notification
  keepalive           Configure TCP Keepalive parameters
  mss                 TCP initial maximum segment size
  path-mtu-discovery  Enable path-MTU discovery on new TCP connections
  queuemax            Maximum queue of outgoing TCP packets
  selective-ack       Enable TCP selective-ACK
  synwait-time        Set time to wait on new TCP connections
  timestamp           Enable TCP timestamp option
  window-size         TCP window size 

• 適用於ASR1k路由器

Router#show version

Cisco IOS® XE Software, Version 03.16.01a.S - Extended Support Release
Cisco IOS® Software, ASR1000 Software (X86_64_LINUX_IOSD-UNIVERSAL-M), Version 15.5(3)S1a, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2015 by Cisco Systems, Inc.
Compiled Wed 04-Nov-15 13:57 by mcpre

<omitted>

Router uptime is 1 minute
Uptime for this control processor is 2 minutes
System returned to ROM by reload
System image file is "bootflash:asr1001x-universal.03.16.01a.S.155-3.S1a-ext.SPA.bin"
Last reload reason: PowerOn

License Level: ipbase
License Type: Permanent
Next reload license Level: ipbase

cisco ASR1001-X (1NG) processor (revision 1NG) with 3753592K/6147K bytes of memory.
Processor board ID FXS1925Q33T
6 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
8388608K bytes of physical memory.
6684671K bytes of eUSB flash at bootflash:
 

Configuration register is 0x2102
Router#config t
Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#ip tcp ?
  RST-count           Configure RST throttle count
  async-mobility      Configure async-mobility
  chunk-size          TCP chunk size
  ecn                 Enable Explicit Congestion Notification
  keepalive           Configure TCP Keepalive parameters
  mss                 TCP initial maximum segment size
  path-mtu-discovery  Enable path-MTU discovery on new TCP connections
  queuemax            Maximum queue of outgoing TCP packets
  selective-ack       Enable TCP selective-ACK
  synwait-time        Set time to wait on new TCP connections
  timestamp           Enable TCP timestamp option
  window-size         TCP window size

解決方案

若要啟用TCP攔截功能，您需要：

• ISR G1路由器上最小的entbase功能集
• ISRG2和G3系列路由器上的Appxk9/Datak9
• ASR1000系列路由器上的最低Advipservices許可證

在平台上啟用所需的許可證後，您就可以進行相同的配置：

Router(config)#ip tcp ?
  RST-count           Configure RST throttle count
  async-mobility      Configure async-mobility
  chunk-size          TCP chunk size
  ecn                 Enable Explicit Congestion Notification
  intercept           Enable TCP intercepting
  keepalive           Configure TCP Keepalive parameters
  mss                 TCP initial maximum segment size
  path-mtu-discovery  Enable path-MTU discovery on new TCP connections
  queuemax            Maximum queue of outgoing TCP packets
  selective-ack       Enable TCP selective-ACK
  synwait-time        Set time to wait on new TCP connections
  timestamp           Enable TCP timestamp option
  window-size         TCP window size

驗證

目前沒有適用於此組態的驗證程序。

疑難排解

目前尚無適用於此組態的具體疑難排解資訊。

相關資訊

• http://www.cisco.com/c/en/us/td/docs/ios/12_2/security/configuration/guide/fsecur_c/scfdenl.html
• 技術支援與文件 - Cisco Systems