本檔案將示範如何將存取清單套用到使用TACACS+伺服器的撥號介面。有兩種可能的方法:
定義路由器上的編號訪問清單並參考伺服器上的編號訪問清單。大多數Cisco IOS®軟體版本都支援此功能。
定義伺服器上的整個訪問清單。此每使用者方法需要Cisco IOS軟體版本11.3或更高版本。
注意:對於ISDN,必須使用每用戶方法,並且必須在路由器上配置虛擬配置檔案。
本文件沒有特定需求。
本文中的資訊係根據以下軟體和硬體版本:
Cisco IOS軟體版本11.1或更新版本(在路由器上定義存取清單)
Cisco IOS軟體版本11.3或更新版本(在伺服器上定義存取清單)
Unix版Cisco Secure ACS
適用於Windows 2.x及更高版本的Cisco Secure ACS
TACACS+免費軟體
注意:本文檔假設先前配置了撥號訪問。本文檔不討論撥號配置的詳細資訊。有關如何為撥號配置網路訪問伺服器(NAS)的資訊,請參閱為基本撥號訪問配置NAS。
本文中的資訊是根據特定實驗室環境內的裝置所建立。文中使用到的所有裝置皆從已清除(預設)的組態來啟動。如果您的網路正在作用,請確保您已瞭解任何指令可能造成的影響。
如需文件慣例的詳細資訊,請參閱思科技術提示慣例。
本節提供用於設定本文件中所述功能的資訊。
註:使用Command Lookup Tool(僅限註冊客戶)查詢有關本文檔中使用的命令的更多資訊。
本檔案會使用以下網路設定:
注意:這些配置允許從「mypool」接收地址1.1.1.x的使用者對網路9.9.9.x執行ping(ICMP流量),並允許Telnet(TCP流量)對網路15.15.15.x執行ping(ICMP流量)。它不允許使用者ping網路15.15.15.x或Telnet到網路9.9.9.x。
本檔案會使用這些設定。
執行Cisco IOS軟體版本12.0(5)T的Cisco 2500系列路由器 |
---|
Current configuration: ! version 12.0 service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname koala ! aaa new-model ! !--- These three lines of the configuration !--- are specific to Cisco IOS Software Release 12.0.5.T and later. !--- See the Commands for Other Cisco IOS Releases section for commands !--- for other Cisco IOS releases. ! aaa authentication login default local group tacacs+ aaa authentication ppp default if-needed group tacacs+ aaa authorization network default group tacacs+ enable secret 5 $1$mnZQ$g6XdsgVnnYjEa.l7v.Pij1 enable password ww ! username john password 0 doe ! ip subnet-zero ! cns event-service server ! interface Ethernet0 ip address 10.31.1.5 255.255.255.0 no ip directed-broadcast no mop enabled ! interface Serial0 ip address 11.11.11.11 255.255.255.0 no ip directed-broadcast no ip mroute-cache no fair-queue ! interface Serial1 ip address 12.12.12.12 255.255.255.0 no ip directed-broadcast ! interface Async1 ip unnumbered Ethernet0 no ip directed-broadcast encapsulation ppp no ip route-cache no ip mroute-cache async mode dedicated peer default ip address pool mypool fair-queue 64 16 0 no cdp enable ppp authentication chap ! ip local pool mypool 1.1.1.1 1.1.1.5 ip classless ip route 0.0.0.0 0.0.0.0 10.31.1.1 ip route 9.9.9.0 255.255.255.0 11.11.11.12 ip route 15.15.15.0 255.255.255.0 12.12.12.13 no ip http server ! !--- Access list 101 is defined on the NAS. access-list 101 permit icmp 1.1.1.0 0.0.0.255 9.9.9.0 0.0.0.255 access-list 101 permit tcp 1.1.1.0 0.0.0.255 15.15.15.0 0.0.0.255 dialer-list 1 protocol ip permit dialer-list 1 protocol ipx permit ! !--- Specify TACACS+ server host and key. tacacs-server host 172.18.124.111 tacacs-server key cisco ! line con 0 transport input none line 1 modem InOut transport input all stopbits 1 speed 115200 flowcontrol hardware line 2 16 line aux 0 line vty 0 4 password ww ! end |
注意:若要使用這些命令,請從Cisco 2500系列路由器配置中刪除粗體命令,然後根據Cisco IOS軟體版本的要求將這些命令貼上到中。
Cisco IOS軟體版本11.3.3.T至12.0.5.T
aaa authentication login default tacacs+ local aaa authentication ppp default if-needed tacacs+ local aaa authorization network default tacacs+
Cisco IOS軟體版本11.1到11.3.3.T
aaa authentication login default tacacs+ aaa authentication ppp default if-needed tacacs+ aaa authorization network tacacs+
user = chaprtr { chap = cleartext chaprtr service = ppp protocol = ip { inacl=101 } }
rtp-berry# ./ViewProfile -p 9900 -u chaprtr User Profile Information user = chaprtr{ profile_id = 182 set server current-failed-logins = 1 profile_cycle = 2 service=ppp { protocol=lcp { } protocol=ip { set inacl=101 } } password = chap "chaprtr" }
完成這些步驟,配置適用於Windows的Cisco Secure ACS,以指定NAS應應用哪些ACL。
按一下Group Setup,選擇使用者所屬的組,然後按一下Edit Settings。
在「TACACS+設定」部分按一下PPP IP、在訪問控制清單和PPP LCP覈取方塊。
在「In access control list」框中指定要應用的ACL編號(在本例中為101)。
勾選「Enabled」以啟用PPP IP和PPP LCP選項。
koala#show debug General OS: TACACS access control debugging is on AAA Authentication debugging is on AAA Authorization debugging is on koala#show ip access-lists Extended IP access list 101 permit icmp 1.1.1.0 0.0.0.255 9.9.9.0 0.0.0.255 log (2 matches) permit tcp 1.1.1.0 0.0.0.255 15.15.15.0 0.0.0.255 log (11 matches) koala# 4d05h: As1 AAA/AUTHOR/FSM: (0): LCP succeeds trivially 4d05h: %LINK-3-UPDOWN: Interface Async1, changed state to up 4d05h: AAA: parse name=Async1 idb type=10 tty=1 4d05h: AAA: name=Async1 flags=0x11 type=4 shelf=0 slot=0 adapter=0 port=1 channel=0 4d05h: AAA/MEMORY: create_user (0x54F934) user='chaprtr' ruser='' port='Async1' rem_addr='async' authen_type=CHAP service=PPP priv=1 4d05h: AAA/AUTHEN/START (1203050692): port='Async1' list='' action=LOGIN service=PPP 4d05h: AAA/AUTHEN/START (1203050692): using "default" list 4d05h: AAA/AUTHEN (1203050692): status = UNKNOWN 4d05h: AAA/AUTHEN/START (1203050692): Method=tacacs+ (tacacs+) 4d05h: TAC+: send AUTHEN/START packet ver=193 id=1203050692 4d05h: TAC+: Using default tacacs server-group "tacacs+" list. 4d05h: TAC+: Opening TCP/IP to 172.18.124.111/49 timeout=5 4d05h: TAC+: Opened TCP/IP handle 0x538778 to 172.18.124.111/49 4d05h: TAC+: 172.18.124.111 (1203050692) AUTHEN/START/LOGIN/CHAP queued 4d05h: TAC+: (1203050692) AUTHEN/START/LOGIN/CHAP processed 4d05h: TAC+: ver=192 id=1203050692 received AUTHEN status = GETPASS 4d05h: TAC+: Closing TCP/IP 0x538778 connection to 172.18.124.111/49 4d05h: TAC+: Opening TCP/IP to 172.18.124.111/49 timeout=5 4d05h: TAC+: Opened TCP/IP handle 0x538BBC to 172.18.124.111/49 4d05h: TAC+: Opened 172.18.124.111 index=1 4d05h: AAA: parse name=Async1 idb type=-1 tty=-1 4d05h: AAA: name=Async1 flags=0x11 type=4 shelf=0 slot=0 adapter=0 port=1 channel=0 4d05h: AAA/MEMORY: create_user (0x19FCF8) user='chaprtr' ruser='' port='Async1' rem_addr='async' authen_type=CHAP service=PPP priv=1 4d05h: TAC+: rev0 inbound chap for id=1203050692 using id=2966879003 4d05h: TAC+: 172.18.124.111 (2966879003) AUTHEN/START/SENDPASS/CHAP queued 4d05h: TAC+: (2966879003) AUTHEN/START/SENDPASS/CHAP processed 4d05h: TAC+: ver=192 id=2966879003 received AUTHEN status = PASS 4d05h: TAC+: rev0 inbound chap SENDPASS status=PASS for id=1203050692 4d05h: TAC+: rev0 inbound chap MD5 compare OK 4d05h: AAA/MEMORY: free_user (0x19FCF8) user='chaprtr' ruser='' port='Async1' rem_addr='async' authen_type=CHAP service=PPP priv=1 4d05h: TAC+: Closing TCP/IP 0x538BBC connection to 172.18.124.111/49 4d05h: AAA/AUTHEN (1203050692): status = PASS 4d05h: As1 AAA/AUTHOR/LCP: Authorize LCP 4d05h: As1 AAA/AUTHOR/LCP (3002156107): Port='Async1' list='' service=NET 4d05h: AAA/AUTHOR/LCP: As1 (3002156107) user='chaprtr' 4d05h: As1 AAA/AUTHOR/LCP (3002156107): send AV service=ppp 4d05h: As1 AAA/AUTHOR/LCP (3002156107): send AV protocol=lcp 4d05h: As1 AAA/AUTHOR/LCP (3002156107): found list "default" 4d05h: As1 AAA/AUTHOR/LCP (3002156107): Method=tacacs+ (tacacs+) 4d05h: AAA/AUTHOR/TAC+: (3002156107): user=chaprtr 4d05h: AAA/AUTHOR/TAC+: (3002156107): send AV service=ppp 4d05h: AAA/AUTHOR/TAC+: (3002156107): send AV protocol=lcp 4d05h: TAC+: using previously set server 172.18.124.111 from group tacacs+ 4d05h: TAC+: Opening TCP/IP to 172.18.124.111/49 timeout=5 4d05h: TAC+: Opened TCP/IP handle 0x539000 to 172.18.124.111/49 4d05h: TAC+: Opened 172.18.124.111 index=1 4d05h: TAC+: 172.18.124.111 (3002156107) AUTHOR/START queued 4d05h: TAC+: (3002156107) AUTHOR/START processed 4d05h: TAC+: (3002156107): received author response status = PASS_ADD 4d05h: TAC+: Closing TCP/IP 0x539000 connection to 172.18.124.111/49 4d05h: As1 AAA/AUTHOR (3002156107): Post authorization status = PASS_ADD 4d05h: As1 AAA/AUTHOR/FSM: (0): Can we start IPCP? 4d05h: As1 AAA/AUTHOR/FSM (1577158668): Port='Async1' list='' service=NET 4d05h: AAA/AUTHOR/FSM: As1 (1577158668) user='chaprtr' 4d05h: As1 AAA/AUTHOR/FSM (1577158668): send AV service=ppp 4d05h: As1 AAA/AUTHOR/FSM (1577158668): send AV protocol=ip 4d05h: As1 AAA/AUTHOR/FSM (1577158668): found list "default" 4d05h: As1 AAA/AUTHOR/FSM (1577158668): Method=tacacs+ (tacacs+) 4d05h: AAA/AUTHOR/TAC+: (1577158668): user=chaprtr 4d05h: AAA/AUTHOR/TAC+: (1577158668): send AV service=ppp 4d05h: AAA/AUTHOR/TAC+: (1577158668): send AV protocol=ip 4d05h: TAC+: using previously set server 172.18.124.111 from group tacacs+ 4d05h: TAC+: Opening TCP/IP to 172.18.124.111/49 timeout=5 4d05h: TAC+: Opened TCP/IP handle 0x539444 to 172.18.124.111/49 4d05h: TAC+: Opened 172.18.124.111 index=1 4d05h: TAC+: 172.18.124.111 (1577158668) AUTHOR/START queued 4d05h: TAC+: (1577158668) AUTHOR/START processed 4d05h: TAC+: (1577158668): received author response status = PASS_ADD 4d05h: TAC+: Closing TCP/IP 0x539444 connection to 172.18.124.111/49 4d05h: As1 AAA/AUTHOR (1577158668): Post authorization status = PASS_ADD 4d05h: As1 AAA/AUTHOR/FSM: We can start IPCP 4d05h: %LINEPROTO-5-UPDOWN: Line protocol on Interface Async1, changed state to up 4d05h: As1 AAA/AUTHOR/IPCP: Start. Her address 0.0.0.0, we want 0.0.0.0 4d05h: As1 AAA/AUTHOR/IPCP: Processing AV service=ppp 4d05h: As1 AAA/AUTHOR/IPCP: Processing AV protocol=ip 4d05h: As1 AAA/AUTHOR/IPCP: Processing AV inacl=101 4d05h: As1 AAA/AUTHOR/IPCP: Authorization succeeded 4d05h: As1 AAA/AUTHOR/IPCP: Done. Her address 0.0.0.0, we want 0.0.0.0 4d05h: As1 AAA/AUTHOR/IPCP: Start. Her address 0.0.0.0, we want 1.1.1.2 4d05h: As1 AAA/AUTHOR/IPCP: Processing AV service=ppp 4d05h: As1 AAA/AUTHOR/IPCP: Processing AV protocol=ip !--- Apply ACL 101 in the inbound direction. 4d05h: As1 AAA/AUTHOR/IPCP: Processing AV inacl=101 4d05h: As1 AAA/AUTHOR/IPCP: Authorization succeeded 4d05h: As1 AAA/AUTHOR/IPCP: Done. Her address 0.0.0.0, we want 1.1.1.2 4d05h: As1 AAA/AUTHOR/IPCP: Start. Her address 1.1.1.2, we want 1.1.1.2 4d05h: As1 AAA/AUTHOR/IPCP (1659098608): Port='Async1' list='' service=NET 4d05h: AAA/AUTHOR/IPCP: As1 (1659098608) user='chaprtr' 4d05h: As1 AAA/AUTHOR/IPCP (1659098608): send AV service=ppp 4d05h: As1 AAA/AUTHOR/IPCP (1659098608): send AV protocol=ip 4d05h: As1 AAA/AUTHOR/IPCP (1659098608): send AV addr*1.1.1.2 4d05h: As1 AAA/AUTHOR/IPCP (1659098608): found list "default" 4d05h: As1 AAA/AUTHOR/IPCP (1659098608): Method=tacacs+ (tacacs+) 4d05h: AAA/AUTHOR/TAC+: (1659098608): user=chaprtr 4d05h: AAA/AUTHOR/TAC+: (1659098608): send AV service=ppp 4d05h: AAA/AUTHOR/TAC+: (1659098608): send AV protocol=ip 4d05h: AAA/AUTHOR/TAC+: (1659098608): send AV addr*1.1.1.2 4d05h: TAC+: using previously set server 172.18.124.111 from group tacacs+ 4d05h: TAC+: Opening TCP/IP to 172.18.124.111/49 timeout=5 4d05h: TAC+: Opened TCP/IP handle 0x538BBC to 172.18.124.111/49 4d05h: TAC+: Opened 172.18.124.111 index=1 4d05h: TAC+: 172.18.124.111 (1659098608) AUTHOR/START queued 4d05h: TAC+: (1659098608) AUTHOR/START processed 4d05h: TAC+: (1659098608): received author response status = PASS_REPL 4d05h: TAC+: Closing TCP/IP 0x538BBC connection to 172.18.124.111/49 4d05h: As1 AAA/AUTHOR (1659098608): Post authorization status = PASS_REPL 4d05h: As1 AAA/AUTHOR/IPCP: Reject 1.1.1.2, using 1.1.1.2 4d05h: As1 AAA/AUTHOR/IPCP: Processing AV service=ppp 4d05h: As1 AAA/AUTHOR/IPCP: Processing AV protocol=ip 4d05h: As1 AAA/AUTHOR/IPCP: Processing AV inacl=101 4d05h: As1 AAA/AUTHOR/IPCP: Processing AV addr*1.1.1.2 4d05h: As1 AAA/AUTHOR/IPCP: Authorization succeeded 4d05h: As1 AAA/AUTHOR/IPCP: Done. Her address 1.1.1.2, we want 1.1.1.2 4d05h: %SEC-6-IPACCESSLOGDP: list 101 permitted icmp 1.1.1.2 -> 9.9.9.9 (0/0), 3 packets koala#show ip access-lists Extended IP access list 101 permit icmp 1.1.1.0 0.0.0.255 9.9.9.0 0.0.0.255 log (5 matches) permit tcp 1.1.1.0 0.0.0.255 15.15.15.0 0.0.0.255 log (11 matches) koala#
注意:Route語句不必從伺服器向下傳遞到路由器。撥號使用者通常從路由器提取路由。路由器上存在route語句取決於路由是從伺服器向下傳遞還是從路由器獲取:
ip route 9.9.9.0 255.255.255.0 11.11.11.12 ip route 15.15.15.0 255.255.255.0 12.12.12.13
在此示例配置中,從伺服器向下傳遞路由僅用於說明目的。
路由器配置 |
---|
Current configuration: ! version 12.0 service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname koala ! aaa new-model ! !--- These three lines of the configuration !--- are specific to Cisco IOS Software Release 12.0.5.T and later. !--- See the Commands for Other IOS Releases section for !--- commands for other Cisco IOS Software releases. ! aaa authentication login default group tacacs+ none aaa authentication ppp default if-needed group tacacs+ aaa authorization network default group tacacs+ enable secret 5 $1$mnZQ$g6XdsgVnnYjEa.l7v.Pij1 enable password ww ! username john password 0 doe ! ip subnet-zero ! cns event-service server ! interface Ethernet0 ip address 10.31.1.5 255.255.255.0 no ip directed-broadcast no mop enabled ! interface Serial0 ip address 11.11.11.11 255.255.255.0 no ip directed-broadcast no ip mroute-cache no fair-queue ! interface Serial1 ip address 12.12.12.12 255.255.255.0 no ip directed-broadcast ! interface Async1 ip unnumbered Ethernet0 no ip directed-broadcast encapsulation ppp no ip route-cache no ip mroute-cache async mode dedicated peer default ip address pool mypool fair-queue 64 16 0 no cdp enable ppp authentication chap ! ip local pool mypool 1.1.1.1 1.1.1.5 ip classless ip route 0.0.0.0 0.0.0.0 10.31.1.1 ip route 172.17.192.0 255.255.255.0 10.31.1.1 ip route 172.18.124.0 255.255.255.0 10.31.1.1 ip route 172.18.125.0 255.255.255.0 10.31.1.1 no ip http server ! dialer-list 1 protocol ip permit dialer-list 1 protocol ipx permit ! tacacs-server host 172.18.124.111 tacacs-server key cisco ! line con 0 transport input none line 1 autoselect during-login autoselect ppp modem InOut transport input all stopbits 1 speed 115200 flowcontrol hardware line 2 16 line aux 0 line vty 0 4 password ww ! end |
注意:若要使用這些命令,請根據Cisco IOS軟體版本的指示,從Router配置中刪除粗體命令並將這些命令貼上到。
Cisco IOS軟體版本11.3.3.T至12.0.5.T
aaa authentication login default tacacs+ local aaa authentication ppp default if-needed tacacs+ local aaa authorization network default tacacs+
Cisco IOS軟體版本11.3到11.3.3.T
aaa authentication login default tacacs+ aaa authentication ppp default if-needed tacacs+ aaa authorization network tacacs+
user = chaprtr { chap = cleartext chaprtr service = ppp protocol = ip { route#1 = "9.9.9.9 255.255.255.255 11.11.11.12" route#2 = "15.15.15.15 255.255.255.255 12.12.12.13" route#3 = "15.15.15.16 255.255.255.255 12.12.12.13" inacl#1 = "permit icmp 1.1.1.0 0.0.0.255 9.9.9.0 0.0.0.255" inacl#2 = "permit tcp 1.1.1.0 0.0.0.255 15.15.15.0 0.0.0.255" } }
rtp-berry# ./ViewProfile -p 9900 -u chaprtr User Profile Information user = chaprtr{ profile_id = 183 set server current-failed-logins = 1 profile_cycle = 4 service=ppp { protocol=lcp { } protocol=ip { set route#1="9.9.9.9 255.255.255.255 11.11.11.12" set route#2="15.15.15.15 255.255.255.255 12.12.12.13" set route#3="15.15.15.16 255.255.255.255 12.12.12.13" set inacl#1="permit icmp 1.1.1.0 0.0.0.255 9.9.9.0 0.0.0.255" set inacl#2="permit tcp 1.1.1.0 0.0.0.255 15.15.15.0 0.0.0.255" } } password = chap "chaprtr" }
完成這些步驟,以配置Cisco Secure for Windows以將ACL傳遞到NAS。
按一下「Interface Configuration」,然後選擇TACACS+ Cisco。
選中Display a window for each selected service,您可以在其中在「Advanced Configuration Options」(高級配置選項)部分輸入自定義TACACS+屬性,然後按一下Submit。
按一下Group Setup,選擇使用者所屬的組,然後按一下Edit Settings。
轉到PPP IP部分,然後在TACACS+設定中按一下PPP IP、Custom Attributes和Enable覈取方塊。
在「自定義屬性」框中輸入此處顯示的文本,然後按一下提交。
route#1=9.9.9.9 255.255.255.255 11.11.11.12 route#2=15.15.15.15 255.255.255.255 12.12.12.13 route#3=15.15.15.16 255.255.255.255 12.12.12.13 inacl#1=permit icmp 1.1.1.0 0.0.0.255 9.9.9.0 0.0.0.255 inacl#2=permit tcp 1.1.1.0 0.0.0.255 15.15.15.0 0.0.0.255
此使用者配置檔案用於建立此調試輸出。
chaprtr { login = cleartext cisco chap = cleartext chaprtr service = ppp protocol = ip { route#1 = "9.9.9.9 255.255.255.255 11.11.11.12" route#2 = "15.15.15.15 255.255.255.255 12.12.12.13" route#3 = "15.15.15.16 255.255.255.255 12.12.12.13" inacl#1 = "permit icmp 1.1.1.0 0.0.0.255 9.9.9.0 0.0.0.255" inacl#2 = "permit tcp 1.1.1.0 0.0.0.255 15.15.15.0 0.0.0.255" } } koala# *Mar 1 01:22:39.963: As1 LCP: I CONFREQ [Closed] id 0 len 23 *Mar 1 01:22:39.967: As1 LCP: ACCM 0x00000000 (0x020600000000) *Mar 1 01:22:39.971: As1 LCP: MagicNumber 0x000034BD (0x0506000034BD) *Mar 1 01:22:39.971: As1 LCP: PFC (0x0702) *Mar 1 01:22:39.975: As1 LCP: ACFC (0x0802) *Mar 1 01:22:39.975: As1 LCP: Callback 6 (0x0D0306) *Mar 1 01:22:39.979: As1 LCP: Lower layer not up, Fast Starting *Mar 1 01:22:39.983: As1 PPP: Treating connection as a dedicated line *Mar 1 01:22:39.983: As1 PPP: Phase is ESTABLISHING, Active Open [0 sess, 0 load] *Mar 1 01:22:39.987: As1 AAA/AUTHOR/FSM: (0): LCP succeeds trivially *Mar 1 01:22:39.991: As1 LCP: O CONFREQ [Closed] id 30 len 25 *Mar 1 01:22:39.995: As1 LCP: ACCM 0x000A0000 (0x0206000A0000) *Mar 1 01:22:39.999: As1 LCP: AuthProto CHAP (0x0305C22305) *Mar 1 01:22:40.003: As1 LCP: MagicNumber 0xE069F1B8 (0x0506E069F1B8) *Mar 1 01:22:40.003: As1 LCP: PFC (0x0702) *Mar 1 01:22:40.007: As1 LCP: ACFC (0x0802) *Mar 1 01:22:40.011: As1 LCP: O CONFREJ [REQsent] id 0 len 7 *Mar 1 01:22:40.011: As1 LCP: Callback 6 (0x0D0306) 01:22:40: %LINK-3-UPDOWN: Interface Async1, changed state to up *Mar 1 01:22:40.139: As1 LCP: I CONFACK [REQsent] id 30 len 25 *Mar 1 01:22:40.143: As1 LCP: ACCM 0x000A0000 (0x0206000A0000) *Mar 1 01:22:40.143: As1 LCP: AuthProto CHAP (0x0305C22305) *Mar 1 01:22:40.147: As1 LCP: MagicNumber 0xE069F1B8 (0x0506E069F1B8) *Mar 1 01:22:40.151: As1 LCP: PFC (0x0702) *Mar 1 01:22:40.151: As1 LCP: ACFC (0x0802) *Mar 1 01:22:40.155: As1 LCP: I CONFREQ [ACKrcvd] id 1 len 20 *Mar 1 01:22:40.159: As1 LCP: ACCM 0x00000000 (0x020600000000) *Mar 1 01:22:40.163: As1 LCP: MagicNumber 0x000034BD (0x0506000034BD) *Mar 1 01:22:40.163: As1 LCP: PFC (0x0702) *Mar 1 01:22:40.167: As1 LCP: ACFC (0x0802) *Mar 1 01:22:40.171: As1 LCP: O CONFACK [ACKrcvd] id 1 len 20 *Mar 1 01:22:40.171: As1 LCP: ACCM 0x00000000 (0x020600000000) *Mar 1 01:22:40.175: As1 LCP: MagicNumber 0x000034BD (0x0506000034BD) *Mar 1 01:22:40.179: As1 LCP: PFC (0x0702) *Mar 1 01:22:40.179: As1 LCP: ACFC (0x0802) *Mar 1 01:22:40.183: As1 LCP: State is Open *Mar 1 01:22:40.183: As1 PPP: Phase is AUTHENTICATING, by this end [0 sess, 1 load] *Mar 1 01:22:40.187: As1 CHAP: O CHALLENGE id 10 len 26 from "koala" *Mar 1 01:22:40.295: As1 LCP: I IDENTIFY [Open] id 2 len 18 magic 0x000034BD MSRASV4.00 *Mar 1 01:22:40.307: As1 LCP: I IDENTIFY [Open] id 3 len 21 magic 0x000034BD MSRAS-1-ZEKIE *Mar 1 01:22:40.315: As1 CHAP: I RESPONSE id 10 len 28 from "chaprtr" *Mar 1 01:22:40.323: AAA: parse name=Async1 idb type=10 tty=1 *Mar 1 01:22:40.323: AAA: name=Async1 flags=0x11 type=4 shelf=0 slot=0 adapter=0 port=1 channel=0 *Mar 1 01:22:40.327: AAA/MEMORY: create_user (0x4ED58C) user='chaprtr' ruser='' port='Async1' rem_addr='async' authen_type=CHAP service=PPP priv=1 *Mar 1 01:22:40.331: AAA/AUTHEN/START (2439833946): port='Async1' list='' action=LOGIN service=PPP *Mar 1 01:22:40.335: AAA/AUTHEN/START (2439833946): using "default" list *Mar 1 01:22:40.339: AAA/AUTHEN (2439833946): status = UNKNOWN *Mar 1 01:22:40.339: AAA/AUTHEN/START (2439833946): Method=tacacs+ (tacacs+) *Mar 1 01:22:40.343: TAC+: send AUTHEN/START packet ver=193 id=2439833946 *Mar 1 01:22:40.347: TAC+: Using default tacacs server-group "tacacs+" list. *Mar 1 01:22:40.347: TAC+: Opening TCP/IP to 172.18.124.111/49 timeout=5 *Mar 1 01:22:40.359: TAC+: Opened TCP/IP handle 0x4EDDF8 to 172.18.124.111/49 *Mar 1 01:22:40.367: TAC+: 172.18.124.111 (2439833946) AUTHEN/START/LOGIN/CHAP queued *Mar 1 01:22:40.667: TAC+: (2439833946) AUTHEN/START/LOGIN/CHAP processed *Mar 1 01:22:40.671: TAC+: ver=192 id=2439833946 received AUTHEN status = GETPASS *Mar 1 01:22:40.675: TAC+: Closing TCP/IP 0x4EDDF8 connection to 172.18.124.111/49 *Mar 1 01:22:40.679: TAC+: Opening TCP/IP to 172.18.124.111/49 timeout=5 *Mar 1 01:22:40.695: TAC+: Opened TCP/IP handle 0x4EE23C to 172.18.124.111/49 *Mar 1 01:22:40.695: TAC+: Opened 172.18.124.111 index=1 *Mar 1 01:22:40.699: AAA: parse name=Async1 idb type=-1 tty=-1 *Mar 1 01:22:40.703: AAA: name=Async1 flags=0x11 type=4 shelf=0 slot=0 adapter=0 port=1 channel=0 *Mar 1 01:22:40.707: AAA/MEMORY: create_user (0x4EC300) user='chaprtr' ruser='' port='Async1' rem_addr='async' authen_type=CHAP service=PPP priv=1 *Mar 1 01:22:40.711: TAC+: rev0 inbound chap for id=2439833946 using id=1730351499 *Mar 1 01:22:40.715: TAC+: 172.18.124.111 (1730351499) AUTHEN/START/SENDPASS/CHAP queued *Mar 1 01:22:40.915: TAC+: (1730351499) AUTHEN/START/SENDPASS/CHAP processed *Mar 1 01:22:40.919: TAC+: ver=192 id=1730351499 received AUTHEN status = PASS *Mar 1 01:22:40.923: TAC+: rev0 inbound chap SENDPASS status=PASS for id=2439833946 *Mar 1 01:22:40.927: TAC+: rev0 inbound chap MD5 compare OK *Mar 1 01:22:40.927: AAA/MEMORY: free_user (0x4EC300) user='chaprtr' ruser='' port='Async1' rem_addr='async' authen_type=CHAP service=PPP priv=1 *Mar 1 01:22:40.935: TAC+: Closing TCP/IP 0x4EE23C connection to 172.18.124.111/49 *Mar 1 01:22:40.939: AAA/AUTHEN (2439833946): status = PASS *Mar 1 01:22:40.943: As1 AAA/AUTHOR/LCP: Authorize LCP *Mar 1 01:22:40.947: As1 AAA/AUTHOR/LCP (4250537500): Port='Async1' list='' service=NET *Mar 1 01:22:40.947: AAA/AUTHOR/LCP: As1 (4250537500) user='chaprtr' *Mar 1 01:22:40.951: As1 AAA/AUTHOR/LCP (4250537500): send AV service=ppp *Mar 1 01:22:40.955: As1 AAA/AUTHOR/LCP (4250537500): send AV protocol=lcp *Mar 1 01:22:40.955: As1 AAA/AUTHOR/LCP (4250537500): found list "default" *Mar 1 01:22:40.959: As1 AAA/AUTHOR/LCP (4250537500): Method=tacacs+ (tacacs+) *Mar 1 01:22:40.963: AAA/AUTHOR/TAC+: (4250537500): user=chaprtr *Mar 1 01:22:40.963: AAA/AUTHOR/TAC+: (4250537500): send AV service=ppp *Mar 1 01:22:40.967: AAA/AUTHOR/TAC+: (4250537500): send AV protocol=lcp *Mar 1 01:22:40.971: TAC+: using previously set server 172.18.124.111 from group tacacs+ *Mar 1 01:22:40.971: TAC+: Opening TCP/IP to 172.18.124.111/49 timeout=5 *Mar 1 01:22:40.987: TAC+: Opened TCP/IP handle 0x4EE680 to 172.18.124.111/49 *Mar 1 01:22:40.991: TAC+: Opened 172.18.124.111 index=1 *Mar 1 01:22:40.999: TAC+: 172.18.124.111 (4250537500) AUTHOR/START queued *Mar 1 01:22:41.195: TAC+: (4250537500) AUTHOR/START processed *Mar 1 01:22:41.199: TAC+: (4250537500): received author response status = PASS_ADD *Mar 1 01:22:41.203: TAC+: Closing TCP/IP 0x4EE680 connection to 172.18.124.111/49 *Mar 1 01:22:41.207: As1 AAA/AUTHOR (4250537500): Post authorization status = PASS_ADD *Mar 1 01:22:41.215: As1 CHAP: O SUCCESS id 10 len 4 *Mar 1 01:22:41.219: As1 PPP: Phase is UP [0 sess, 0 load] *Mar 1 01:22:41.223: As1 AAA/AUTHOR/FSM: (0): Can we start IPCP? *Mar 1 01:22:41.223: As1 AAA/AUTHOR/FSM (2403262371): Port='Async1' list='' service=NET *Mar 1 01:22:41.227: AAA/AUTHOR/FSM: As1 (2403262371) user='chaprtr' *Mar 1 01:22:41.231: As1 AAA/AUTHOR/FSM (2403262371): send AV service=ppp *Mar 1 01:22:41.231: As1 AAA/AUTHOR/FSM (2403262371): send AV protocol=ip *Mar 1 01:22:41.235: As1 AAA/AUTHOR/FSM (2403262371): found list "default" *Mar 1 01:22:41.239: As1 AAA/AUTHOR/FSM (2403262371): Method=tacacs+ (tacacs+) *Mar 1 01:22:41.239: AAA/AUTHOR/TAC+: (2403262371): user=chaprtr *Mar 1 01:22:41.243: AAA/AUTHOR/TAC+: (2403262371): send AV service=ppp *Mar 1 01:22:41.243: AAA/AUTHOR/TAC+: (2403262371): send AV protocol=ip *Mar 1 01:22:41.247: TAC+: using previously set server 172.18.124.111 from group tacacs+ *Mar 1 01:22:41.251: TAC+: Opening TCP/IP to 172.18.124.111/49 timeout=5 *Mar 1 01:22:41.263: TAC+: Opened TCP/IP handle 0x4EEAC4 to 172.18.124.111/49 *Mar 1 01:22:41.267: TAC+: Opened 172.18.124.111 index=1 *Mar 1 01:22:41.275: TAC+: 172.18.124.111 (2403262371) AUTHOR/START queued *Mar 1 01:22:41.323: As1 CCP: I CONFREQ [Not negotiated] id 4 len 12 *Mar 1 01:22:41.327: As1 CCP: OUI (0x0002) *Mar 1 01:22:41.327: As1 CCP: MS-PPC supported bits 0x00007080 (0x120600007080) *Mar 1 01:22:41.335: As1 LCP: O PROTREJ [Open] id 31 len 18 protocol CCP (0x80FD0104000C0002120600007080) *Mar 1 01:22:41.339: As1 IPCP: I CONFREQ [Closed] id 5 len 40 *Mar 1 01:22:41.343: As1 IPCP: CompressType VJ 15 slots CompressSlotID (0x0206002D0F01) *Mar 1 01:22:41.347: As1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 1 01:22:41.351: As1 IPCP: PrimaryDNS 0.0.0.0 (0x810600000000) *Mar 1 01:22:41.355: As1 IPCP: PrimaryWINS 0.0.0.0 (0x820600000000) *Mar 1 01:22:41.359: As1 IPCP: SecondaryDNS 0.0.0.0 (0x830600000000) *Mar 1 01:22:41.363: As1 IPCP: SecondaryWINS 0.0.0.0 (0x840600000000) *Mar 1 01:22:41.607: TAC+: (2403262371) AUTHOR/START processed *Mar 1 01:22:41.623: TAC+: (2403262371): received author response status = PASS_ADD *Mar 1 01:22:41.627: TAC+: Closing TCP/IP 0x4EEAC4 connection to 172.18.124.111/49 *Mar 1 01:22:41.635: As1 AAA/AUTHOR (2403262371): Post authorization status = PASS_ADD *Mar 1 01:22:41.647: As1 AAA/AUTHOR/FSM: We can start IPCP *Mar 1 01:22:41.651: As1 IPCP: O CONFREQ [Closed] id 7 len 10 *Mar 1 01:22:41.655: As1 IPCP: Address 10.31.1.5 (0x03060A1F0105) *Mar 1 01:22:41.659: As1 AAA/AUTHOR/FSM: (0): Can we start CDPCP? *Mar 1 01:22:41.663: As1 AAA/AUTHOR/FSM (840307497): Port='Async1' list='' service=NET *Mar 1 01:22:41.667: AAA/AUTHOR/FSM: As1 (840307497) user='chaprtr' *Mar 1 01:22:41.671: As1 AAA/AUTHOR/FSM (840307497): send AV service=ppp *Mar 1 01:22:41.671: As1 AAA/AUTHOR/FSM (840307497): send AV protocol=cdp *Mar 1 01:22:41.675: As1 AAA/AUTHOR/FSM (840307497): found list "default" *Mar 1 01:22:41.675: As1 AAA/AUTHOR/FSM (840307497): Method=tacacs+ (tacacs+) *Mar 1 01:22:41.679: AAA/AUTHOR/TAC+: (840307497): user=chaprtr *Mar 1 01:22:41.683: AAA/AUTHOR/TAC+: (840307497): send AV service=ppp *Mar 1 01:22:41.683: AAA/AUTHOR/TAC+: (840307497): send AV protocol=cdp *Mar 1 01:22:41.687: TAC+: using previously set server 172.18.124.111 from group tacacs+ *Mar 1 01:22:41.691: TAC+: Opening TCP/IP to 172.18.124.111/49 timeout=5 *Mar 1 01:22:41.703: TAC+: Opened TCP/IP handle 0x4EE23C to 172.18.124.111/49 *Mar 1 01:22:41.707: TAC+: Opened 172.18.124.111 index=1 *Mar 1 01:22:41.715: TAC+: 172.18.124.111 (840307497) AUTHOR/START queued *Mar 1 01:22:41.759: As1 IPCP: I CONFACK [REQsent] id 7 len 10 *Mar 1 01:22:41.763: As1 IPCP: Address 10.31.1.5 (0x03060A1F0105) *Mar 1 01:22:41.915: TAC+: (840307497) AUTHOR/START processed *Mar 1 01:22:41.923: TAC+: (840307497): received author response status = FAIL *Mar 1 01:22:41.927: TAC+: Closing TCP/IP 0x4EE23C connection to 172.18.124.111/49 *Mar 1 01:22:41.931: As1 AAA/AUTHOR (840307497): Post authorization status = FAIL *Mar 1 01:22:41.935: As1 AAA/AUTHOR/FSM: We cannot start CDPCP *Mar 1 01:22:41.935: As1 CDPCP: State is Closed 01:22:42: %LINEPROTO-5-UPDOWN: Line protocol on Interface Async1, changed state to up *Mar 1 01:22:42.359: As1 PPP: Outbound cdp packet dropped, CDPCP is Closed [starting negotiations] *Mar 1 01:22:42.359: As1 CDPCP: State is Closed *Mar 1 01:22:42.499: As1 PPP: Outbound cdp packet dropped, CDPCP is Closed [starting negotiations] *Mar 1 01:22:42.503: As1 CDPCP: State is Closed *Mar 1 01:22:42.639: As1 PPP: Outbound cdp packet dropped, CDPCP is Closed [starting negotiations] *Mar 1 01:22:42.643: As1 CDPCP: State is Closed *Mar 1 01:22:42.795: As1 PPP: Outbound cdp packet dropped, CDPCP is Closed [starting negotiations] *Mar 1 01:22:42.799: As1 CDPCP: State is Closed *Mar 1 01:22:43.147: As1 CDPCP: TIMEout: State Closed *Mar 1 01:22:43.151: As1 CDPCP: State is Listen *Mar 1 01:22:43.155: As1 IPCP: I CONFREQ [ACKrcvd] id 5 len 40 *Mar 1 01:22:43.159: As1 IPCP: CompressType VJ 15 slots CompressSlotID (0x0206002D0F01) *Mar 1 01:22:43.163: As1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 1 01:22:43.167: As1 IPCP: PrimaryDNS 0.0.0.0 (0x810600000000) *Mar 1 01:22:43.171: As1 IPCP: PrimaryWINS 0.0.0.0 (0x820600000000) *Mar 1 01:22:43.171: As1 IPCP: SecondaryDNS 0.0.0.0 (0x830600000000) *Mar 1 01:22:43.175: As1 IPCP: SecondaryWINS 0.0.0.0 (0x840600000000) *Mar 1 01:22:43.179: As1 AAA/AUTHOR/IPCP: Start. Her address 0.0.0.0, we want 0.0.0.0 *Mar 1 01:22:43.183: As1 AAA/AUTHOR/IPCP: Processing AV service=ppp *Mar 1 01:22:43.187: As1 AAA/AUTHOR/IPCP: Processing AV protocol=ip !--- The NAS received the route statements and ACLs !--- from the ACS device. *Mar 1 01:22:43.187: As1 AAA/AUTHOR/IPCP: Processing AV route#1= 9.9.9.9 255.255.255.255 11.11.11.12 *Mar 1 01:22:43.191: As1 AAA/AUTHOR/IPCP: Processing AV route#2= 15.15.15.15 255.255.255.255 12.12.12.13 *Mar 1 01:22:43.195: As1 AAA/AUTHOR/IPCP: Processing AV route#3= 15.15.15.16 255.255.255.255 12.12.12.13 *Mar 1 01:22:43.199: As1 AAA/AUTHOR/IPCP: Processing AV inacl#1= permit icmp 1.1.1.0 0.0.0.255 9.9.9.0 0.0.0.255 *Mar 1 01:22:43.199: As1 AAA/AUTHOR/IPCP: Processing AV inacl#2= permit tcp 1.1.1.0 0.0.0.255 15.15.15.0 0.0.0.255 *Mar 1 01:22:43.203: As1 AAA/AUTHOR/IPCP: Authorization succeeded *Mar 1 01:22:43.207: As1 AAA/AUTHOR/IPCP: Done. Her address 0.0.0.0, we want 0.0.0.0 *Mar 1 01:22:43.211: As1 IPCP: Pool returned 1.1.1.1 *Mar 1 01:22:43.215: As1 IPCP: O CONFREJ [ACKrcvd] id 5 len 28 *Mar 1 01:22:43.219: As1 IPCP: CompressType VJ 15 slots CompressSlotID (0x0206002D0F01) *Mar 1 01:22:43.223: As1 IPCP: PrimaryWINS 0.0.0.0 (0x820600000000) *Mar 1 01:22:43.227: As1 IPCP: SecondaryDNS 0.0.0.0 (0x830600000000) *Mar 1 01:22:43.231: As1 IPCP: SecondaryWINS 0.0.0.0 (0x840600000000) *Mar 1 01:22:43.339: As1 IPCP: I CONFREQ [ACKrcvd] id 6 len 16 *Mar 1 01:22:43.343: As1 IPCP: Address 0.0.0.0 (0x030600000000) *Mar 1 01:22:43.347: As1 IPCP: PrimaryDNS 0.0.0.0 (0x810600000000) *Mar 1 01:22:43.351: As1 AAA/AUTHOR/IPCP: Start. Her address 0.0.0.0, we want 1.1.1.1 *Mar 1 01:22:43.355: As1 AAA/AUTHOR/IPCP: Processing AV service=ppp *Mar 1 01:22:43.355: As1 AAA/AUTHOR/IPCP: Processing AV protocol=ip !--- The NAS applies the route statements and ACLs. *Mar 1 01:22:43.359: As1 AAA/AUTHOR/IPCP: Processing AV route#1= 9.9.9.9 255.255.255.255 11.11.11.12 *Mar 1 01:22:43.363: As1 AAA/AUTHOR/IPCP: Processing AV route#2= 15.15.15.15 255.255.255.255 12.12.12.13 *Mar 1 01:22:43.363: As1 AAA/AUTHOR/IPCP: Processing AV route#3= 15.15.15.16 255.255.255.255 12.12.12.13 *Mar 1 01:22:43.367: As1 AAA/AUTHOR/IPCP: Processing AV inacl#1= permit icmp 1.1.1.0 0.0.0.255 9.9.9.0 0.0.0.255 *Mar 1 01:22:43.371: As1 AAA/AUTHOR/IPCP: Processing AV inacl#2= permit tcp 1.1.1.0 0.0.0.255 15.15.15.0 0.0.0.255 *Mar 1 01:22:43.375: As1 AAA/AUTHOR/IPCP: Authorization succeeded *Mar 1 01:22:43.375: As1 AAA/AUTHOR/IPCP: Done. Her address 0.0.0.0, we want 1.1.1.1 *Mar 1 01:22:43.383: As1 IPCP: O CONFNAK [ACKrcvd] id 6 len 16 *Mar 1 01:22:43.387: As1 IPCP: Address 1.1.1.1 (0x030601010101) *Mar 1 01:22:43.391: As1 IPCP: PrimaryDNS 172.18.125.3 (0x8106AC127D03) *Mar 1 01:22:43.499: As1 IPCP: I CONFREQ [ACKrcvd] id 7 len 16 *Mar 1 01:22:43.503: As1 IPCP: Address 1.1.1.1 (0x030601010101) *Mar 1 01:22:43.507: As1 IPCP: PrimaryDNS 172.18.125.3 (0x8106AC127D03) *Mar 1 01:22:43.511: As1 AAA/AUTHOR/IPCP: Start. Her address 1.1.1.1, we want 1.1.1.1 *Mar 1 01:22:43.519: As1 AAA/AUTHOR/IPCP (2646570182): Port='Async1' list='' service=NET *Mar 1 01:22:43.519: AAA/AUTHOR/IPCP: As1 (2646570182) user='chaprtr' *Mar 1 01:22:43.523: As1 AAA/AUTHOR/IPCP (2646570182): send AV service=ppp *Mar 1 01:22:43.523: As1 AAA/AUTHOR/IPCP (2646570182): send AV protocol=ip *Mar 1 01:22:43.527: As1 AAA/AUTHOR/IPCP (2646570182): send AV addr*1.1.1.1 *Mar 1 01:22:43.531: As1 AAA/AUTHOR/IPCP (2646570182): found list "default" *Mar 1 01:22:43.535: As1 AAA/AUTHOR/IPCP (2646570182): Method=tacacs+ (tacacs+) *Mar 1 01:22:43.539: AAA/AUTHOR/TAC+: (2646570182): user=chaprtr *Mar 1 01:22:43.539: AAA/AUTHOR/TAC+: (2646570182): send AV service=ppp *Mar 1 01:22:43.543: AAA/AUTHOR/TAC+: (2646570182): send AV protocol=ip *Mar 1 01:22:43.543: AAA/AUTHOR/TAC+: (2646570182): send AV addr*1.1.1.1 *Mar 1 01:22:43.547: TAC+: using previously set server 172.18.124.111 from group tacacs+ *Mar 1 01:22:43.551: TAC+: Opening TCP/IP to 172.18.124.111/49 timeout=5 *Mar 1 01:22:43.563: TAC+: Opened TCP/IP handle 0x4EE23C to 172.18.124.111/49 *Mar 1 01:22:43.567: TAC+: Opened 172.18.124.111 index=1 *Mar 1 01:22:43.575: TAC+: 172.18.124.111 (2646570182) AUTHOR/START queued *Mar 1 01:22:43.875: TAC+: (2646570182) AUTHOR/START processed *Mar 1 01:22:43.887: TAC+: (2646570182): received author response status = PASS_REPL *Mar 1 01:22:43.891: TAC+: Closing TCP/IP 0x4EE23C connection to 172.18.124.111/49 *Mar 1 01:22:43.899: As1 AAA/AUTHOR (2646570182): Post authorization status = PASS_REPL *Mar 1 01:22:43.911: As1 AAA/AUTHOR/IPCP: Reject 1.1.1.1, using 1.1.1.1 *Mar 1 01:22:43.915: As1 AAA/AUTHOR/IPCP: Processing AV service=ppp *Mar 1 01:22:43.919: As1 AAA/AUTHOR/IPCP: Processing AV protocol=ip *Mar 1 01:22:43.923: As1 AAA/AUTHOR/IPCP: Processing AV route#1= 9.9.9.9 255.255.255.255 11.11.11.12 *Mar 1 01:22:43.923: As1 AAA/AUTHOR/IPCP: Processing AV route#2= 15.15.15.15 255.255.255.255 12.12.12.13 *Mar 1 01:22:43.927: As1 AAA/AUTHOR/IPCP: Processing AV route#3= 15.15.15.16 255.255.255.255 12.12.12.13 *Mar 1 01:22:43.931: As1 AAA/AUTHOR/IPCP: Processing AV inacl#1= permit icmp 1.1.1.0 0.0.0.255 9.9.9.0 0.0.0.255 *Mar 1 01:22:43.935: As1 AAA/AUTHOR/IPCP: Processing AV inacl#2= permit tcp 1.1.1.0 0.0.0.255 15.15.15.0 0.0.0.255 *Mar 1 01:22:43.939: As1 AAA/AUTHOR/IPCP: Processing AV addr*1.1.1.1 *Mar 1 01:22:43.939: As1 AAA/AUTHOR/IPCP: Authorization succeeded *Mar 1 01:22:43.943: As1 AAA/AUTHOR/IPCP: Done. Her address 1.1.1.1, we want 1.1.1.1 *Mar 1 01:22:43.947: As1 IPCP: O CONFACK [ACKrcvd] id 7 len 16 *Mar 1 01:22:43.951: As1 IPCP: Address 1.1.1.1 (0x030601010101) *Mar 1 01:22:43.955: As1 IPCP: PrimaryDNS 172.18.125.3 (0x8106AC127D03) *Mar 1 01:22:43.959: As1 IPCP: State is Open *Mar 1 01:22:44.483: As1 IPCP: Install route to 1.1.1.1 koala# koala#
目前沒有適用於此組態的驗證程序。
本節提供的資訊可用於對組態進行疑難排解。
輸出直譯器工具(僅供已註冊客戶使用)(OIT)支援某些show命令。使用OIT檢視show命令輸出的分析。
附註:使用 debug 指令之前,請先參閱有關 Debug 指令的重要資訊。
debug aaa authentication — 顯示有關AAA/TACACS+身份驗證的資訊。
debug aaa authorization — 顯示有關AAA/TACACS+授權的資訊。
debug aaa per-user — 顯示有關從AAA伺服器傳送的路由器或訪問伺服器上的每使用者配置設定的資訊。
debug tacacs+ — 顯示與TACACS+關聯的詳細調試資訊。
debug ppp negotiation — 顯示在PPP啟動期間傳輸的PPP資料包,其中協商了PPP選項。
如需疑難排解資訊,請參閱撥號介面上的存取清單疑難排解。
修訂 | 發佈日期 | 意見 |
---|---|---|
1.0 |
24-Sep-2018 |
初始版本 |