使用NAT和Cisco VPN客戶端配置PIX到PIX動態到靜態IPSec

下載選項

  • PDF     (273.6 KB)
    在多種裝置上使用 Adobe Reader 檢視
  • ePub     (93.8 KB)
    在 iPhone、iPad、Android、Sony Reader 或 Windows Phone 上的各種應用程式中檢視
  • Mobi (Kindle)     (113.1 KB)
    在 Kindle 裝置或多部裝置的 Kindle 應用程式上檢視
已更新: 2008 年 10 月 13 日
文件 ID:14090

無偏見用語

本產品的文件集力求使用無偏見用語。針對本文件集的目的，無偏見係定義為未根據年齡、身心障礙、性別、種族身分、民族身分、性別傾向、社會經濟地位及交織性表示歧視的用語。由於本產品軟體使用者介面中硬式編碼的語言、根據 RFP 文件使用的語言，或引用第三方產品的語言，因此本文件中可能會出現例外狀況。深入瞭解思科如何使用包容性用語。

關於此翻譯

思科已使用電腦和人工技術翻譯本文件，讓全世界的使用者能夠以自己的語言理解支援內容。請注意，即使是最佳機器翻譯，也不如專業譯者翻譯的內容準確。Cisco Systems, Inc. 對這些翻譯的準確度概不負責，並建議一律查看原始英文文件（提供連結）。

簡介

在此示例配置中，遠端PIX通過動態主機配置協定(DHCP)接收IP地址並連線到中央PIX。此配置使中央PIX能夠接受動態IPsec連線。遠端PIX使用網路地址轉換(NAT)將在其背後的私有定址裝置「加入」到中央PIX背後的私有定址網路。遠端PIX可以啟動與中央PIX的連線（它知道終點），但中央PIX無法啟動與遠端PIX的連線（它不知道終點）。

在此示例配置中，Tiger是遠端PIX，Lion是中央PIX。由於Tiger的IP地址未知，因此您必須將Lion配置為動態接受來自任何位置的連線，同時瞭解萬用字元預共用金鑰。Tiger知道要加密哪些流量（因為它由訪問清單指定）以及Lion終端的位置。Tiger必須啟動連線。兩端都執行NAT和nat 0以繞過IPsec流量的NAT。

此外，此配置中的遠端使用者使用Cisco VPN Client 3.x連線到中央PIX(Lion)。遠端使用者無法連線到遠端PIX(Tiger)，因為兩端都會動態分配IP地址，並且不知道將請求傳送到何處。

請參閱使用NAT和VPN客戶端的PIX/ASA 7.x PIX到PIX動態到靜態IPsec配置示例，以瞭解有關使用Cisco VPN客戶端4.x的PIX/ASA 7.x中相同方案的詳細資訊。

必要條件

需求

本文件沒有特定需求。

採用元件

本文中的資訊係根據以下軟體和硬體版本：

  • Cisco PIX防火牆軟體版本6.0(1)（適用於Cisco VPN客戶端3.x的更高版本）

  • Cisco PIX防火牆軟體版本5.3.1（遠端PIX）

  • Cisco VPN使用者端版本3.x

本文中的資訊是根據特定實驗室環境內的裝置所建立。文中使用到的所有裝置皆從已清除（預設）的組態來啟動。如果您的網路正在作用，請確保您已瞭解任何指令可能造成的影響。

慣例

如需文件慣例的詳細資訊，請參閱思科技術提示慣例。

設定

本節提供用於設定本文件中所述功能的資訊。

註：使用Command Lookup Tool(僅供已註冊客戶使用)可獲取本節中使用的命令的詳細資訊。

網路圖表

本檔案會使用以下網路設定：

dynamicpix.gif

組態

Lion配置 
Building configuration...
: Saved
:
PIX Version 6.0(1)
nameif gb-ethernet0 spare1 security10
nameif gb-ethernet1 spare2 security15
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname lion
domain-name cisco.com
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 1720
fixup protocol rsh 514
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol skinny 2000
names
!

!--- ACL to avoid Network Address Translation (NAT) on the IPsec packets.

access-list 100 permit ip 10.2.2.0 255.255.255.0 10.1.1.0 255.255.255.0 
access-list 100 permit ip 10.2.2.0 255.255.255.0 10.3.3.0 255.255.255.0
!
pager lines 24
logging buffered debugging
interface gb-ethernet0 1000auto shutdown
interface gb-ethernet1 1000auto shutdown
interface ethernet0 10baset
interface ethernet1 10baset
mtu spare1 1500
mtu spare2 1500
mtu outside 1500
mtu inside 1500
ip address spare1 127.0.0.1 255.255.255.255
ip address spare2 127.0.0.1 255.255.255.255
!

!--- IP addresses on the interfaces

ip address outside 203.1.1.1 255.255.255.0
ip address inside 10.2.2.1 255.255.255.0
!
ip audit info action alarm
ip audit attack action alarm
ip local pool clientpool 10.3.3.1-10.3.3.10
no failover
failover timeout 0:00:00
failover poll 15
failover ip address spare1 0.0.0.0
failover ip address spare2 0.0.0.0
failover ip address outside 0.0.0.0
failover ip address inside 0.0.0.0
pdm history enable
arp timeout 14400

!--- global (outside) 1 203.1.1.10-203.1.1.15 !--- Change from NAT to PAT on the DHCP interface.

 global (outside) 1 interface
!

!--- Binding ACL 100 to the NAT statement to avoid NAT on the IPsec packets.

nat (inside) 0 access-list 100
!
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
conduit permit icmp any any
!

!--- Default route to the Internet

route outside 0.0.0.0 0.0.0.0 203.1.1.2 1
!
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h323 0:05:00 sip 
  0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
!

!--- The sysopt command avoids conduit on the IPsec encrypted traffic.

sysopt connection permit-ipsec
!
no sysopt route dnat
!

!--- Phase 2 encryption type

crypto ipsec transform-set myset esp-des esp-md5-hmac
crypto dynamic-map cisco 1 set transform-set myset
crypto map dyn-map 20 ipsec-isakmp dynamic cisco
!

!--- Binds the IPsec engine on the outside interface.

crypto map dyn-map interface outside
!

!--- Enables ISAKMP key-exchange.

isakmp enable outside
!

!--- ISAKMP policy for accepting dynamic connections from the remote PIX.

isakmp key ******** address 0.0.0.0 netmask 0.0.0.0

!--- ISAKMP policy for Cisco VPN Client 2.x

isakmp policy 10 authentication pre-share
isakmp policy 10 encryption des
isakmp policy 10 hash md5
isakmp policy 10 group 1
isakmp policy 10 lifetime 1000
!

!--- ISAKMP policy for Cisco VPN Client 3.x

isakmp policy 20 authentication pre-share
isakmp policy 20 encryption des
isakmp policy 20 hash sha
isakmp policy 20 group 2
isakmp policy 20 lifetime 86400
!

!--- IPsec group configuration for either client

vpngroup unityclient address-pool clientpool
vpngroup unityclient dns-server 10.1.1.3
vpngroup unityclient wins-server 10.1.1.3
vpngroup unityclient default-domain cisco.com
vpngroup unityclient idle-time 1800
vpngroup unityclient password ********
!
telnet timeout 5
ssh timeout 5
terminal width 80
Cryptochecksum:d6fe92db883a052c5765be21a74e7c8d
: end
[OK]

Tiger配置 
Building configuration...
: Saved
:
PIX Version 5.3(1)
nameif gb-ethernet0 spare1 security10
nameif gb-ethernet1 spare2 security15
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
hostname tiger
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 1720
fixup protocol rsh 514
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
names
!

!--- ACL to avoid NAT on the IPsec packets

access-list 101 permit ip 10.1.1.0 255.255.255.0 10.2.2.0 255.255.255.0
!
pager lines 24
logging on
no logging timestamp
no logging standby
no logging console
no logging monitor
logging buffered debugging
no logging trap
no logging history
logging facility 20
logging queue 512
interface gb-ethernet0 1000auto shutdown
interface gb-ethernet1 1000auto shutdown
interface ethernet0 10baset
interface ethernet1 10baset
mtu spare1 1500
mtu spare2 1500
mtu outside 1500
mtu inside 1500
ip address spare1 127.0.0.1 255.255.255.255
ip address spare2 127.0.0.1 255.255.255.255
!
ip address outside dhcp
ip address inside 10.1.1.1 255.255.255.0
!
ip audit info action alarm
ip audit attack action alarm
no failover
failover timeout 0:00:00
failover poll 15
failover ip address spare1 0.0.0.0
failover ip address spare2 0.0.0.0
failover ip address outside 0.0.0.0
failover ip address inside 0.0.0.0
arp timeout 14400
global (outside) 1 204.1.1.10-204.1.1.15
!

!--- Binds ACL 101 to the NAT statement to avoid NAT on the IPsec packets.

nat (inside) 0 access-list 101
!
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
conduit permit icmp any any
route outside 0.0.0.0 0.0.0.0 204.1.1.2 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h323 0:05:00 sip 
  0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
!

!--- The sysopt command avoids conduit on the IPsec encrypted traffic.

sysopt connection permit-ipsec
!
no sysopt route dnat
!

!--- Phase 2 encryption type

crypto ipsec transform-set myset esp-des esp-md5-hmac
crypto map newmap 10 ipsec-isakmp
crypto map newmap 10 match address 101
crypto map newmap 10 set peer 203.1.1.1
crypto map newmap 10 set transform-set myset
!

!--- Binds the IPsec engine on the outside interface.

crypto map newmap interface outside
!

!--- Enables ISAKMP key-exchange

isakmp enable outside
!

!--- ISAKMP policy for connecting to the central PIX.

isakmp key ******** address 203.1.1.1 netmask 255.255.255.255
isakmp identity hostname
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption des
isakmp policy 10 hash md5
isakmp policy 10 group 1
isakmp policy 10 lifetime 1000
!
telnet timeout 5
ssh timeout 5
terminal width 80
Cryptochecksum:6743b7bf9476590ecd1a1a8c6d75245b
: end
[OK]

驗證

本節提供的資訊可用於確認您的組態是否正常運作。

輸出直譯器工具(僅供已註冊客戶使用)(OIT)支援某些show命令。使用OIT檢視show命令輸出的分析。

注意：clear命令必須在配置模式下執行。

  • clear crypto ipsec sa — 在嘗試協商VPN隧道失敗後重置IPsec關聯。

  • clear crypto isakmp sa — 在嘗試協商VPN隧道失敗後重置Internet安全關聯和金鑰管理協定(ISAKMP)安全關聯。

  • show crypto engine ipsec — 顯示加密會話。

疑難排解

本節提供的資訊可用於對組態進行疑難排解。

疑難排解指令

輸出直譯器工具(僅供已註冊客戶使用)(OIT)支援某些show命令。使用OIT檢視show命令輸出的分析。

附註：使用 debug 指令之前，請先參閱有關 Debug 指令的重要資訊。

  • debug crypto ipsec — 用於檢視客戶端是否協商VPN連線的IPsec部分。

  • debug crypto isakmp connection — 用於檢視對等體是否正在協商VPN的ISAKMP部分。

「正常」調試輸出示例

Central Pix調試 

crypto_isakmp_process_block: src 204.1.1.1, dest 203.1.1.1
OAK_MM exchange
ISAKMP (0): processing SA payload. message ID = 0

ISAKMP (0): Checking ISAKMP transform 1 against priority 10 policy
ISAKMP:      encryption DES-CBC
ISAKMP:      hash MD5
ISAKMP:      default group 1
ISAKMP:      auth pre-share
ISAKMP:      life type in seconds
ISAKMP:      life duration (basic) of 1000
ISAKMP (0): atts are acceptable. Next payload is 0
ISAKMP (0): SA is doing pre-shared key authentication using id type ID_FQDN
return status is IKMP_NO_ERROR
crypto_isakmp_process_block: src 204.1.1.1, dest 203.1.1.1
OAK_MM exchange
ISAKMP (0): processing KE payload. message ID = 0

ISAKMP (0): processing NONCE payload. message ID = 0

ISAKMP (0): processing vendor id payload

ISAKMP (0): processing vendor id payload

ISAKMP (0): processing vendor id payload

ISAKMP (0): speaking to another IOS box!

return status is IKMP_NO_ERROR
crypto_isakmp_process_block: src 204.1.1.1, dest 203.1.1.1
OAK_MM exchange
ISAKMP (0): processing ID payload. message ID = 0
ISAKMP (0): processing HASH payload. message ID = 0
ISAKMP (0): SA has been authenticated

ISAKMP (0): ID payload
        next-payload : 8
        type         : 2
        protocol     : 17
        port         : 500
        length       : 10
ISAKMP (0): Total payload length: 14
return status is IKMP_NO_ERROR
crypto_isakmp_process_block: src 204.1.1.1, dest 203.1.1.1
OAK_QM exchange
oakley_process_quick_mode:
OAK_QM_IDLE
ISAKMP (0): processing SA payload. message ID = 1223411072

ISAKMP : Checking IPSec proposal 1

ISAKMP: transform 1, ESP_DES
ISAKMP:   attributes in transform:
ISAKMP:      encaps is 1
ISAKMP:      SA life type in seconds
ISAKMP:      SA life duration (basic) of 28800
ISAKMP:      SA life type in kilobytes
ISAKMP:      SA life duration (VPI) of  0x0 0x46 0x50 0x0 
ISAKMP:      authenticator is HMAC-MD5
ISAKMP (0): atts are acceptable.IPSEC(validate_proposal_request): proposal part #1,
  (key eng. msg.) dest= 203.1.1.1, src= 204.1.1.1, 
    dest_proxy= 10.1.1.0/255.255.255.0/0/0 (type=4), 
    src_proxy= 10.2.2.0/255.255.255.0/0/0 (type=4),
    protocol= ESP, transform= esp-des esp-md5-hmac , 
    lifedur= 0s and 0kb, 
    spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x4

ISAKMP (0): processing NONCE payload. message ID = 1223411072

ISAKMP (0): processing ID payload. message ID = 1223411072
ISAKMP (0): ID_IPV4_ADDR_SUBNET src 10.2.2.0/255.255.255.0 prot 0 port 0
ISAKMP (0): processing ID payload. message ID = 1223411072
ISAKMP (0): ID_IPV4_ADDR_SUBNET dst 10.1.1.0/255.255.255.0 prot 0 port
   0IPSEC(key_engine): got a queue event...
IPSEC(spi_response): getting spi 0xd0e27cb6(3504503990) for SA from 204.1.1.1
   to 203.1.1.1 for prot 3

return status is IKMP_NO_ERROR
crypto_isakmp_process_block: src 204.1.1.1, dest 203.1.1.1
OAK_QM exchange
oakley_process_quick_mode:
OAK_QM_AUTH_AWAIT
ISAKMP (0): Creating IPSec SAs
        inbound SA from 204.1.1.1 to 203.1.1.1 proxy 10.2.2.0 to 10.1.1.0)
        has spi 3504503990 and conn_id 4 and flags 4
        lifetime of 28800 seconds
        lifetime of 4608000 kilobytes
        outbound SA from 203.1.1.1 to 204.1.1.1(proxy 10.1.1.0 to 10.2.2.0)
        has spi 2729504033 and conn_id 3 and flags 4
        lifetime of 28800 seconds
        lifetime of 4608000 kilobytesIPSEC(key_engine): got a queue event...
IPSEC(initialize_sas): ,
  (key eng. msg.) dest= 203.1.1.1, src= 204.1.1.1, 
    dest_proxy= 10.1.1.0/255.255.255.0/0/0 (type=4), 
    src_proxy= 10.2.2.0/255.255.255.0/0/0 (type=4),
    protocol= ESP, transform= esp-des esp-md5-hmac , 
    lifedur= 28800s and 4608000kb, 
    spi= 0xd0e27cb6(3504503990), conn_id= 4, keysize= 0, flags= 0x4
IPSEC(initialize_sas): ,
  (key eng. msg.) src= 203.1.1.1, dest= 204.1.1.1, 
    src_proxy= 10.1.1.0/255.255.255.0/0/0 (type=4), 
    dest_proxy= 10.2.2.0/255.255.255.0/0/0 (type=4),
    protocol= ESP, transform= esp-des esp-md5-hmac , 
    lifedur= 28800s and 4608000kb, 
    spi= 0xa2b0ed21(2729504033), conn_id= 3, keysize= 0, flags= 0x4

return status is IKMP_NO_ERROR

遠端PIX調試 

ISAKMP (0): beginning Main Mode exchange

crypto_isakmp_process_block: src 203.1.1.1, dest 204.1.1.1
OAK_MM exchange
ISAKMP (0): processing SA payload. message ID = 0

ISAKMP (0): Checking ISAKMP transform 1 against priority 10 policy
ISAKMP:      encryption DES-CBC
ISAKMP:      hash MD5
ISAKMP:      default group 1
ISAKMP:      auth pre-share
ISAKMP:      life type in seconds
ISAKMP:      life duration (basic) of 1000
ISAKMP (0): atts are acceptable. Next payload is 0
ISAKMP (0): SA is doing pre-shared key authentication using id type ID_FQDN
return status is IKMP_NO_ERROR
crypto_isakmp_process_block: src 203.1.1.1, dest 204.1.1.1
OAK_MM exchange
ISAKMP (0): processing KE payload. message ID = 0

ISAKMP (0): processing NONCE payload. message ID = 0

ISAKMP (0): processing vendor id payload

ISAKMP (0): speaking to another IOS box!

ISAKMP (0): ID payload
        next-payload : 8
        type         : 2
        protocol     : 17
        port         : 500
        length       : 18
ISAKMP (0): Total payload length: 22
return status is IKMP_NO_ERROR
crypto_isakmp_process_block: src 203.1.1.1, dest 204.1.1.1
OAK_MM exchange
ISAKMP (0): processing ID payload. message ID = 0
ISAKMP (0): processing HASH payload. message ID = 0
ISAKMP (0): SA has been authenticated

ISAKMP (0): beginning Quick Mode exchange, M-ID of
   1223411072:48ebc580IPSEC(key_engine):got a queue event...
IPSEC(spi_response): getting spi 0xa2b0ed21(2729504033) for SA 
        from       203.1.1.1 to       204.1.1.1 for prot 3

return status is IKMP_NO_ERROR
crypto_isakmp_process_block: src 203.1.1.1, dest 204.1.1.1
OAK_QM exchange
oakley_process_quick_mode:
OAK_QM_IDLE
ISAKMP (0): processing SA payload. message ID = 1223411072

ISAKMP : Checking IPSec proposal 1

ISAKMP: transform 1, ESP_DES
ISAKMP:   attributes in transform:
ISAKMP:      encaps is 1
ISAKMP:      SA life type in seconds
ISAKMP:      SA life duration (basic) of 28800
ISAKMP:      SA life type in kilobytes
ISAKMP:      SA life duration (VPI) of  0x0 0x46 0x50 0x0 
ISAKMP:      authenticator is HMAC-MD5
ISAKMP (0): atts are acceptable.IPSEC(validate_proposal_request): proposal part #1,
  (key eng. msg.) dest= 203.1.1.1, src= 204.1.1.1, 
    dest_proxy= 10.1.1.0/255.255.255.0/0/0 (type=4), 
    src_proxy= 10.2.2.0/255.255.255.0/0/0 (type=4),
    protocol= ESP, transform= esp-des esp-md5-hmac , 
    lifedur= 0s and 0kb, 
    spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x4

ISAKMP (0): processing NONCE payload. message ID = 1223411072

ISAKMP (0): processing ID payload. message ID = 1223411072
ISAKMP (0): processing ID payload. message ID = 1223411072
ISAKMP (0): Creating IPSec SAs
        inbound SA from 203.1.1.1 to 204.1.1.1 (proxy 10.1.1.0 to 10.2.2.0)
        has spi 2729504033 and conn_id 4 and flags 4
        lifetime of 28800 seconds
        lifetime of 4608000 kilobytes
        outbound SA from 204.1.1.1 to 203.1.1.1 (proxy 10.2.2.0 to 10.1.1.0)
        has spi 3504503990 and conn_id 3 and flags 4
        lifetime of 28800 seconds
        lifetime of 4608000 kilobytesIPSEC(key_engine): got a queue event...
IPSEC(initialize_sas): ,
  (key eng. msg.) dest= 204.1.1.1, src= 203.1.1.1, 
    dest_proxy= 10.2.2.0/255.255.255.0/0/0 (type=4), 
    src_proxy= 10.1.1.0/255.255.255.0/0/0 (type=4),
    protocol= ESP, transform= esp-des esp-md5-hmac , 
    lifedur= 28800s and 4608000kb, 
    spi= 0xa2b0ed21(2729504033), conn_id= 4, keysize= 0, flags= 0x4
IPSEC(initialize_sas): ,
  (key eng. msg.) src= 204.1.1.1, dest= 203.1.1.1, 
    src_proxy= 10.2.2.0/255.255.255.0/0/0 (type=4), 
    dest_proxy= 10.1.1.0/255.255.255.0/0/0 (type=4),
    protocol= ESP, transform= esp-des esp-md5-hmac , 
    lifedur= 28800s and 4608000kb, 
    spi= 0xd0e27cb6(3504503990), conn_id= 3, keysize= 0, flags= 0x4

return status is IKMP_NO_ERROR

客戶端調試 

19     16:43:20.402  06/28/01  Sev=Info/4       CM/0x63100004
Establish secure connection using Ethernet

20     16:43:20.402  06/28/01  Sev=Info/4       CM/0x63100025
Attempt connection with server "203.1.1.1"

21     16:43:20.402  06/28/01  Sev=Info/6       IKE/0x6300003B
Attempting to establish a connection with 203.1.1.1.

22     16:43:20.442  06/28/01  Sev=Info/4       IKE/0x63000013
SENDING >>> ISAKMP OAK AG (SA, KE, NON, ID, VID, VID, VID) to 203.1.1.1

23     16:43:20.452  06/28/01  Sev=Info/4       IPSEC/0x63700014
Deleted all keys

24     16:43:20.492  06/28/01  Sev=Info/5       IKE/0x6300002F
Received ISAKMP packet: peer = 203.1.1.1

25     16:43:20.492  06/28/01  Sev=Info/4       IKE/0x63000014
RECEIVING <<< ISAKMP OAK AG (SA, VID, VID, VID, KE, ID, NON, HASH) from 203.1.1.1

26     16:43:20.492  06/28/01  Sev=Info/5       IKE/0x63000059
Vendor ID payload = 12F5F28C457168A9702D9FE274CC0100


27     16:43:20.492  06/28/01  Sev=Info/5       IKE/0x63000001
Peer is a Cisco-Unity compliant peer

28     16:43:20.492  06/28/01  Sev=Info/5       IKE/0x63000059
Vendor ID payload = AFCAD71368A1F1C96B8696FC77570100


29     16:43:20.492  06/28/01  Sev=Info/5       IKE/0x63000001
Peer supports DPD

30     16:43:20.492  06/28/01  Sev=Info/5       IKE/0x63000059
Vendor ID payload = A0EB477E6627B406AA10F958254B3517


31     16:43:20.542  06/28/01  Sev=Info/4       IKE/0x63000013
SENDING >>> ISAKMP OAK AG *(HASH, NOTIFY:STATUS_INITIAL_CONTACT) to 203.1.1.1

32     16:43:20.542  06/28/01  Sev=Info/4       CM/0x6310000E
Established Phase 1 SA.  1 Phase 1 SA in the system

33     16:43:21.143  06/28/01  Sev=Info/4       IKE/0x63000013
SENDING >>> ISAKMP OAK TRANS *(HASH, ATTR) to 203.1.1.1

34     16:43:24.067  06/28/01  Sev=Info/5       IKE/0x6300002F
Received ISAKMP packet: peer = 203.1.1.1

35     16:43:24.067  06/28/01  Sev=Info/4       IKE/0x63000014
RECEIVING <<< ISAKMP OAK TRANS *(HASH, ATTR) from 203.1.1.1

36     16:43:24.067  06/28/01  Sev=Info/5       IKE/0x63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_ADDRESS: , value = 10.3.3.1


37     16:43:24.067  06/28/01  Sev=Info/5       IKE/0x63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS(1): , value = 10.1.1.3


38     16:43:24.067  06/28/01  Sev=Info/5       IKE/0x63000010
MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_NBNS(1) (a.k.a. WINS) : , value = 10.1.1.3


39     16:43:24.067  06/28/01  Sev=Info/5       IKE/0x6300000E
MODE_CFG_REPLY: Attribute = MODECFG_UNITY_DEFDOMAIN: , value = cisco.com


40     16:43:24.067  06/28/01  Sev=Info/4       CM/0x63100018
Mode Config data received

41     16:43:24.668  06/28/01  Sev=Info/5       IKE/0x63000055
Received a key request from Driver for IP address 203.1.1.1, GW IP = 203.1.1.1


42     16:43:24.668  06/28/01  Sev=Info/4       IKE/0x63000013
SENDING >>> ISAKMP OAK QM *(HASH, SA, NON, ID, ID) to 203.1.1.1

43     16:43:24.668  06/28/01  Sev=Info/5       IKE/0x63000055
Received a key request from Driver for IP address 10.10.10.255, GW IP = 203.1.1.1

44     16:43:24.668  06/28/01  Sev=Info/4       IKE/0x63000013
SENDING >>> ISAKMP OAK QM *(HASH, SA, NON, ID, ID) to 203.1.1.1

45     16:43:24.668  06/28/01  Sev=Info/4       IPSEC/0x63700014
Deleted all keys

46     16:43:25.619  06/28/01  Sev=Info/5       IKE/0x6300002F
Received ISAKMP packet: peer = 203.1.1.1

47     16:43:25.619  06/28/01  Sev=Info/4       IKE/0x63000014
RECEIVING <<< ISAKMP OAK QM *(HASH, SA, NON, ID, ID, NOTIFY:STATUS_RESP_LIFETIME) from 203.1.1.1

48     16:43:25.619  06/28/01  Sev=Info/5       IKE/0x63000044
RESPONDER-LIFETIME notify has value of 28800 seconds

49     16:43:25.619  06/28/01  Sev=Info/5       IKE/0x63000045
RESPONDER-LIFETIME notify has value of 4608000 kb

50     16:43:25.619  06/28/01  Sev=Info/4       IKE/0x63000013
SENDING >>> ISAKMP OAK QM *(HASH) to 203.1.1.1

51     16:43:25.619  06/28/01  Sev=Info/5       IKE/0x63000058
Loading IPsec SA (Message ID = 0x59515364 OUTBOUND SPI = 0xB24CDB55 INBOUND SPI = 0x83AA0042)

52     16:43:25.619  06/28/01  Sev=Info/5       IKE/0x63000025
Loaded OUTBOUND ESP SPI: 0xB24CDB55

53     16:43:25.619  06/28/01  Sev=Info/5       IKE/0x63000026
Loaded INBOUND ESP SPI: 0x83AA0042

54     16:43:25.619  06/28/01  Sev=Info/4       CM/0x63100019
One secure connection established

55     16:43:25.629  06/28/01  Sev=Info/6       DIALER/0x63300003
Connection established.

56     16:43:25.669  06/28/01  Sev=Info/6       DIALER/0x63300008
MAPI32 Information - Outlook not default mail client

57     16:43:25.960  06/28/01  Sev=Info/5       IKE/0x6300002F
Received ISAKMP packet: peer = 203.1.1.1

58     16:43:25.960  06/28/01  Sev=Info/4       IKE/0x63000014
RECEIVING <<< ISAKMP OAK QM *(HASH, SA, NON, ID, ID, NOTIFY:STATUS_RESP_LIFETIME) from 203.1.1.1

59     16:43:25.960  06/28/01  Sev=Info/5       IKE/0x63000044
RESPONDER-LIFETIME notify has value of 28800 seconds

60     16:43:25.960  06/28/01  Sev=Info/5       IKE/0x63000045
RESPONDER-LIFETIME notify has value of 4608000 kb

61     16:43:25.960  06/28/01  Sev=Info/4       IKE/0x63000013
SENDING >>> ISAKMP OAK QM *(HASH) to 203.1.1.1

62     16:43:25.960  06/28/01  Sev=Info/5       IKE/0x63000058
Loading IPsec SA (Message ID = 0x23A23005 OUTBOUND SPI = 0xAD0599DB INBOUND SPI = 0x2B74D4A4)

63     16:43:25.960  06/28/01  Sev=Info/5       IKE/0x63000025
Loaded OUTBOUND ESP SPI: 0xAD0599DB

64     16:43:25.960  06/28/01  Sev=Info/5       IKE/0x63000026
Loaded INBOUND ESP SPI: 0x2B74D4A4

65     16:43:25.960  06/28/01  Sev=Info/4       CM/0x63100021
Additional Phase 2 SA established.

66     16:43:25.960  06/28/01  Sev=Info/4       IPSEC/0x63700010
Created a new key structure

67     16:43:25.960  06/28/01  Sev=Info/4       IPSEC/0x6370000F
Added key with SPI=0x55db4cb2 into key list

68     16:43:25.960  06/28/01  Sev=Info/4       IPSEC/0x63700010
Created a new key structure

69     16:43:25.960  06/28/01  Sev=Info/4       IPSEC/0x6370000F
Added key with SPI=0x4200aa83 into key list

70     16:43:25.960  06/28/01  Sev=Info/4       IPSEC/0x63700010
Created a new key structure

71     16:43:25.960  06/28/01  Sev=Info/4       IPSEC/0x6370000F
Added key with SPI=0xdb9905ad into key list

72     16:43:25.960  06/28/01  Sev=Info/4       IPSEC/0x63700010
Created a new key structure

73     16:43:25.960  06/28/01  Sev=Info/4       IPSEC/0x6370000F
Added key with SPI=0xa4d4742b into key list

74     16:43:35.173  06/28/01  Sev=Info/6       IKE/0x6300003D
Sending DPD request to 203.1.1.1, seq# = 1856135987

75     16:43:35.173  06/28/01  Sev=Info/4       IKE/0x63000013
SENDING >>> ISAKMP OAK INFO *(HASH, NOTIFY:DPD_REQUEST) to 203.1.1.1

76     16:43:35.173  06/28/01  Sev=Info/5       IKE/0x6300002F
Received ISAKMP packet: peer = 203.1.1.1

77     16:43:35.173  06/28/01  Sev=Info/4       IKE/0x63000014
RECEIVING <<< ISAKMP OAK INFO *(HASH, NOTIFY:DPD_ACK) from 203.1.1.1

78     16:43:35.173  06/28/01  Sev=Info/5       IKE/0x6300003F
Received DPD ACK from 203.1.1.1, seq# received = 1856135987, seq# expected = 1856135987

相關資訊

修訂記錄

修訂 發佈日期 意見
1.0
13-Oct-2008
初始版本

這份文件是否有所幫助？

Feedback意見

讓思科協助您