Cisco Small Computer Systems Interface over IP(iSCSI)驅動程式是iSCSI解決方案的關鍵元件。這些iSCSI驅動程式駐留在伺服器上,它們在:
攔截iSCSI命令。
將命令封裝到IP資料包中。
將命令重定向至Cisco SN 5420、Cisco SN 5428、Cisco SN 5428-2或Cisco MDS/IPS-8。
本文檔提供從Solaris iSCSI主機到Cisco MDS/IPS-8的配置示例。
嘗試此組態之前,請確保符合以下要求:
安裝與Solaris版本相容的iSCSI驅動程式,然後在Cisco MDS 9000上建立iSCSI配置。有關驅動程式的最新版本(solaris-iscsi-3.3.5.tar.Z),請參閱Cisco iSCSI驅動程式(僅供註冊客戶使用)。驅動程式ZIP(TAR)檔案中包含一個README.txt檔案。README.txt檔案包含:
許可協定資訊
驅動程式安裝和配置說明
驅動程式架構的技術概述
有關作業系統(OS)和修補程式要求,請參閱Cisco iSCSI Driver for Sun Solaris Release Notes中的「系統要求」部分。
用於Sun Solaris的Cisco iSCSI驅動程式僅在SPARC電腦上運行。該驅動程式不適用於任何其他處理器型別(例如x86)。
本文中的資訊係根據以下軟體和硬體版本:
SunOS 5.9,SPARC Ultra-4 E450
#uname -a SunOS baboon 5.9 Generic sun4u sparc SUNW,Ultra-4
適用於Solaris的Cisco iSCSI驅動程式3.3.3
#pkginfo -l CSCOiscsi PKGINST: CSCOiscsi NAME: Cisco iSCSI device driver CATEGORY: system ARCH: sparc VERSION: 3.3.3 BASEDIR: /opt/CSCOiscsi VENDOR: Cisco Systems, Inc. DESC: Cisco iSCSI device driver 3.3.3 PSTAMP: solaris-920030807170521 INSTDATE: Aug 25 2003 23:41 HOTLINE: For contracted support, 1-800-553-2447, Cisco Technical Assistance Center (TAC) EMAIL: For online help, go to http://www.cisco.com/ STATUS: completely installed FILES: 74 installed pathnames 16 shared pathnames 29 directories 32 executables 2182 blocks used (approx) #iscsi-ls -v iSCSI driver version: 3.3.3
Cisco MDS 9216與軟體版本1.1.2
canterbury#show module Mod Ports Module-Type Model Status --- ----- ------------------------------- ------------------ ------------ 1 16 1/2 Gbps FC/Supervisor DS-X9216-K9-SUP active * 2 8 IP Storage Module DS-X9308-SMIP ok Mod Sw Hw World-Wide-Name(s) (WWN) --- ----------- ------ -------------------------------------------------- 1 1.1(2) 1.0 20:01:00:0c:30:6c:24:40 to 20:10:00:0c:30:6c:24:40 2 1.1(2) 0.3 20:41:00:0c:30:6c:24:40 to 20:48:00:0c:30:6c:24:40 Mod MAC-Address(es) Serial-Num --- -------------------------------------- ---------- 1 00-0b-be-f8-7f-08 to 00-0b-be-f8-7f-0c JAB070804QK 2 00-05-30-00-ad-e2 to 00-05-30-00-ad-ee JAB070806SB * this terminal session canterbury#show version Cisco Storage Area Networking Operating System (SAN-OS) Software TAC support: http://www.cisco.com/tac Copyright (c) 2002-2003 by Cisco Systems, Inc. All rights reserved. The copyright for certain works contained herein are owned by Andiamo Systems, Inc. and/or other third parties and are used and distributed under license. Software BIOS: version 1.0.7 loader: version 1.0(3a) kickstart: version 1.1(2) system: version 1.1(2) BIOS compile time: 03/20/03 kickstart image file is: bootflash:/k112 kickstart compile time: 7/13/2003 20:00:00 system image file is: bootflash:/s112 system compile time: 7/13/2003 20:00:00 Hardware RAM 963112 kB bootflash: 500736 blocks (block size 512b) slot0: 0 blocks (block size 512b) canterbury uptime is 16 days 20 hours 51 minute(s) 36 second(s) Last reset at 684726 usecs after Mon Aug 11 13:53:17 2003 Reason: Reset Requested by CLI command reload System version: 1.1(2)
本文中的資訊是根據特定實驗室環境內的裝置所建立。文中使用到的所有裝置皆從已清除(預設)的組態來啟動。如果您的網路正在作用,請確保您已瞭解任何指令可能造成的影響。
如需文件慣例的詳細資訊,請參閱思科技術提示慣例。
IP儲存模組為IP主機提供對光纖通道(FC)儲存裝置的訪問。IP儲存模組是可提供透明iSCSI路由的DS-X9308-SMIP。使用iSCSI協定的IP主機可以透明地訪問FC網路上的iSCSI(FC協定[FCP])目標。IP主機通過TCP/IP連線將封裝在iSCSI協定資料單元(PDU)中的iSCSI命令傳送到Cisco MDS 9000 IP儲存埠。IP儲存模組上正確配置的千兆乙太網(GE)介面提供連線。IP儲存模組:
使您能夠建立虛擬iSCSI目標並將它們對映到FC SAN中可用的物理FC目標
將FC目標呈現給IP主機,就像物理目標在本地連線到IP網路一樣
需要通過IP儲存模組訪問儲存的iSCSI主機必須安裝相容的iSCSI驅動程式。iSCSI驅動程式允許iSCSI主機使用iSCSI協定通過IP網路傳輸iSCSI請求和響應。從主機作業系統的角度來看,iSCSI驅動程式似乎是iSCSI傳輸驅動程式,類似於主機中外圍通道的FC驅動程式。從儲存裝置的角度來看,每個IP主機都顯示為FC主機。
完成以下步驟,將iSCSI從IP主機路由到FC儲存裝置:
通過IP網路在主機和IP儲存模組之間傳輸iSCSI請求和響應。
使用IP儲存模組在IP網路上的主機和FC儲存裝置之間路由iSCSI請求和響應(將iSCSI轉換為FCP,反之亦然)。
在IP儲存模組和FC儲存裝置之間傳輸FCP請求或響應。
預設情況下,IP儲存模組不會將FC目標匯入iSCSI。必須配置動態或靜態對映,以便IP儲存模組使FC目標可用於iSCSI啟動器。靜態對映的FC目標在配置兩者時都有一個已配置的名稱。此配置提供了靜態對映的示例。
每次iSCSI主機使用動態對映連線到IP儲存模組時:
建立新的FC N埠。
為此N個埠分配的節點全球通用名稱(nWWN)和埠全球通用名稱(pWWN)可以不同。
如果每次連線到IP儲存模組時,必須為iSCSI主機獲取相同的nWWN和pWWN,請使用靜態對映方法。可以使用IP儲存模組上的靜態對映訪問具有以下特徵的智慧FC儲存陣列:
訪問控制
基於啟動器的pWWN或nWWN的邏輯單元號(LUN)對映和掩蔽配置
指定以下專案以控制對每個靜態對映的iSCSI目標的訪問:
通告它們的IP儲存埠的清單
允許訪問的iSCSI啟動器節點名稱清單
基於FC分割槽的訪問控制和基於iSCSI的訪問控制是為iSCSI提供訪問控制的兩種機制。可以同時使用這兩種方法。在此配置中,允許對特定虛擬儲存區域網路(VSAN)進行預設分割槽。IP儲存模組使用基於iSCSI節點名稱的訪問控制清單和基於FC分割槽的訪問控制清單,在iSCSI發現和iSCSI會話建立期間實施訪問控制。
可以通過IP地址或iSCSI限定名稱(IQN)靜態定義iSCSI啟動器。proxy-initiator選項允許在SAN-IOS 1.3中為Cisco MDS交換機動態建立iSCSI啟動器。
iSCSI發現發生在iSCSI主機為所有iSCSI目標建立iSCSI發現會話和查詢時。IP儲存模組僅返回訪問控制策略允許iSCSI主機訪問的iSCSI目標清單。
iSCSI會話建立在IP主機發起iSCSI會話時進行。IP儲存模組驗證:
如果指定的iSCSI目標(在會話登入請求中)是靜態對映目標
允許IP主機的iSCSI節點名稱訪問目標
如果IP主機沒有存取許可權,則會拒絕登入。
接著IP儲存模組:
為此IP主機建立一個FC虛擬N埠(N埠可能已經存在)
FC名稱伺服器查詢IP主機訪問的FC目標pWWN的光纖通道ID(FCID)
IP儲存模組使用IP主機虛擬N埠的pWWN作為名稱伺服器查詢的請求者。因此,名稱伺服器對pWWN執行區域強制查詢並響應查詢。如果名稱伺服器返回FCID,則接受iSCSI會話。否則,登入請求將被拒絕。
本節提供用於設定本文件中所述功能的資訊。
註:使用Command Lookup Tool(僅限註冊客戶)查詢有關本文檔中使用的命令的更多資訊。
本檔案會使用以下網路設定:
本檔案會使用以下設定:
狒狒模型(SunOS 5.9、SPARC E450) |
---|
在Solaris主機上修改以下檔案:
bash-2.05#cat /etc/iscsi.conf # iSCSI configuration file - see iscsi.conf(4) # DiscoveryAddress Settings # ------------------------- # Add "DiscoveryAddress=xxx" entries for each iSCSI router instance. # The driver will attempt to discover iSCSI targets at that address # and make as many targets as possible available for use. # 'xxx' can be an IP address or a hostname. A TCP port number can be # specified by appending a colon and the port number to the address. # All entries have to start in column one and must not contain any # whitespace. # # Example: # # DiscoveryAddress=scsirouter1 DiscoveryAddress=10.48.69.199 !--- Configure the IP address of the GE interface that accepts iSCSI !--- requests from your host. # The DiscoveryAddress Settings can take following entry. # # 1) Authentication Settings # 2) ConnectionTimeout Settings !--- Other required driver parameters can be changed in the iscsi.conf file. !--- Output is suppressed. bash-2.05#cat /etc/iscsi.bindings # iSCSI bindings, file format version 1.0. # NOTE: this file is automatically maintained by the iSCSI daemon. # You should not need to edit this file under most circumstances. # If iSCSI targets in this file have been permanently deleted, you # may wish to delete the bindings for the deleted targets. # # Format: # bus target iSCSI # id id TargetName # 0 0 san-fc-jbod-1 0 1 clariion 0 2 clariion-lun-3-4-5 !--- The iSCSI driver discovery daemon process looks up each discovered target !--- in the /etc/iscsi.bindings file. !--- The corresponding iSCSI target ID is assigned to the target if an entry exists in the file for the target. !--- The smallest available iSCSI target ID !--- is assigned if no entry exists for the target, and an entry is written to the /etc/iscsi.bindings file for !--- this target. !--- Note that the /etc/iscsi.bindings file permanently contains entries !--- for all iSCSI targets ever logged into from this host. !--- You can manually edit the file and remove !--- entries so that the obsolete target no longer consumes an iSCSI target ID if a target is no longer available to a host. !--- Add an entry manually if you know the iSCSI target name !--- in advance and want it to be assigned a particular iSCSI target ID. !--- Stop the iSCSI driver before you edit the /etc/iscsi.bindings !--- file. Issue the !--- /etc/init.d/iscsi start command to manually start the iSCSI driver. !--- Issue the /etc/init.d/iscsi stop command to manually stop the iSCSI driver. bash-2.05#cat /kernel/drv/sd.conf name="sd" class="scsi" class_prop="atapi" target=0 lun=0; name="sd" class="scsi" target=1 lun=0; name="sd" class="scsi" target=1 lun=1; name="sd" class="scsi" target=1 lun=2; # Start iSCSI auto-generated configuration -- do NOT alter or delete this line # You may need to add additional lines to probe for additional LUNs # or targets. You SHOULD delete any lines that represent iSCSI targets # or LUNs that are not used. name="sd" parent="iscsi" target=0 lun=0; name="sd" parent="iscsi" target=1 lun=0; name="sd" parent="iscsi" target=1 lun=1; name="sd" parent="iscsi" target=1 lun=2; name="sd" parent="iscsi" target=2 lun=3; name="sd" parent="iscsi" target=2 lun=4; name="sd" parent="iscsi" target=2 lun=5; name="sd" parent="iscsi" target=2 lun=0; # End iSCSI auto-generated configuration -- do NOT alter or delete this line !--- The corresponding entries for these devices must be made in the standard device configuration files !--- if the targets that get discovered by the iSCSI driver at any point in time !--- do not have a corresponding entry in the standard device configuration files (for example, /kernel/drv/sd.conf or /kernel/drv/st.conf). !--- Then reboot the system and issue the standard Solaris administrative commands !--- (devfsadm, drvconfig) once the system comes up. !--- You do not need to reboot the system if the entries in the device configuration files are already present. However, the standard device configuration !--- commands (devfsadm, drvconfig, and so on) must be issued to configure the !--- new iSCSI devices in the system. |
坎特伯里(Cisco MDS 9216) |
---|
!--- Output is suppressed. vsan database vsan 777 !--- VSAN 777 has been used for iSCSI targets. !--- Output is suppressed. vsan database vsan 777 interface fc1/4 vsan 777 interface fc1/7 !--- Output is suppressed. boot system bootflash:/s112 boot kickstart bootflash:/k112 ip domain-name cisco.com ip name-server 144.254.10.123 ip default-gateway 10.48.69.129 ip routing iscsi authentication none iscsi initiator ip-address 10.48.69.235 !--- Identifies the iSCSI initiator based on the IP address. A virtual N port is !--- created for each network interface card (NIC) or network interface. vsan 777 !--- VSAN 777 has been used for iSCSI targets. Configure the initiator IP address. !--- Targets via VSAN 777 are accessible by iSCSI initiators. iscsi virtual-target name san-fc-jbod-1 pWWN 21:00:00:20:37:67:f7:a2 advertise interface GigabitEthernet2/1 initiator ip address 10.48.69.235 permit !--- Create a static iSCSI virtual target for LUN 0, 1, and 2 of CLARiiON. iscsi virtual-target name clariion pWWN 50:06:01:60:88:02:a8:2b fc-lun 0000 iscsi-lun 0000 pWWN 50:06:01:60:88:02:a8:2b fc-lun 0001 iscsi-lun 0001 pWWN 50:06:01:60:88:02:a8:2b fc-lun 0002 iscsi-lun 0002 advertise interface GigabitEthernet2/1 initiator ip address 10.48.69.235 permit !--- Create a static iSCSI virtual target for LUN 3, 4, and 5 of CLARiiON. iscsi virtual-target name clariion-lun-3-4-5 pWWN 50:06:01:60:88:02:a8:2b fc-lun 0003 iscsi-lun 0003 pWWN 50:06:01:60:88:02:a8:2b fc-lun 0004 iscsi-lun 0004 pWWN 50:06:01:60:88:02:a8:2b fc-lun 0005 iscsi-lun 0005 advertise interface GigabitEthernet2/1 initiator ip address 10.48.69.235 permit !--- Output is suppressed. switchname canterbury !--- Output is suppressed. zone default-zone permit vsan 777 !--- Output is suppressed. interface GigabitEthernet2/1 ip address 10.48.69.199 255.255.255.192 iscsi authentication none switchport mtu 2156 no shutdown !--- Output is suppressed. interface fc1/4 no shutdown !--- Output is suppressed. interface fc1/7 no shutdown interface mgmt0 ip address 10.48.69.156 255.255.255.192 interface iscsi2/1 no shutdown |
使用本節內容,確認您的組態是否正常運作。
輸出直譯器工具(僅供已註冊客戶使用)(OIT)支援某些show命令。使用OIT檢視show命令輸出的分析。
netstat -n — 驗證Solaris主機上的TCP連線。
iscsi-ls -l — 顯示Solaris主機上當前可用的裝置。
show zone status — 顯示區域資訊。
show fcns database vsan 777 —顯示特定VSAN的名稱伺服器資訊。
show flogi database vsan 777 —顯示特定VSAN的交換矩陣登入(FLOGI)伺服器資訊。
show vsan membership — 顯示不同VSAN的介面資訊。
show iscsi initiator detail — 顯示iSCSI啟動器資訊。
show iscsi initiator iscsi-session detail —顯示iSCSI啟動器會話的詳細資訊。
show iscsi initiator fcp-session detail —顯示iSCSI啟動器FCP會話的詳細資訊。
show ips stats tcp interface gigabitethernet 2/1 detail — 顯示特定GE介面的TCP統計資訊。
show iscsi virtual-target configured — 顯示已在Cisco MDS 9000上配置的iSCSI虛擬目標。
show iscsi initiator configured — 顯示已在Cisco MDS 9000上配置的iSCSI啟動器。
show ips arp interface gigabitethernet 2/1 — 顯示特定GE介面的IP儲存位址解析通訊協定(ARP)資訊。
show scsi-target devices vsan 777 —顯示特定VSAN的iSCSI裝置(將FC LUN對映到iSCSI LUN)。
show int iscsi 2/1 — 顯示iSCSI介面。
show iscsi stats iscsi 2/1 — 顯示iSCSI統計資訊。
show int gigabitethernet 2/1 — 顯示GE介面。
show ip route — 顯示IP路由資訊。
使用本節內容,對組態進行疑難排解。
狒狒輸出 |
---|
bash-2.05# /etc/init.d/iscsi stop iSCSI is stopping. Aug 28 09:42:08 baboon iscsimod: iSCSIs: closing connection to target 2 at 10.48.69.199 Aug 28 09:42:08 baboon iscsimod: iSCSIs: closing connection to target 1 at 10.48.69.199 Aug 28 09:42:08 baboon iscsimod: iSCSIs: closing connection to target 0 at 10.48.69.199 bash-2.05# /etc/init.d/iscsi start iSCSI is starting. bash-2.05#bash-2.05# netstat -n TCP: IPv4 Local Address Remote Address Swind Send-Q Rwind Recv-Q State -------------------- -------------------- ----- ------ ----- ------ ------- 10.48.69.235.32797 10.48.69.199.3260 65535 0 49172 0 ESTABLISHED 10.48.69.235.32798 10.48.69.199.3260 9379072 0 263152 0 ESTABLISHED 10.48.69.235.32799 10.48.69.199.3260 9379072 0 263152 0 ESTABLISHED Active UNIX domain sockets Address Type Vnode Conn Local Addr Remote Addr 30002d95c88 dgram 30000205828 00000000 /tmp/portal /etc/iscsi.bindings # 0 0 san-fc-jbod-1 0 1 clariion bash-2.05# devfsadm Aug 28 09:45:04 baboon iscsimod: NOTICE: iSCSIs: bus 0 tgt 1 lun 0, Cmd 0x4d, Sense: Aug 28 09:45:04 baboon iscsimod: 70000500 0000000a 00000000 20000000 0000 Aug 28 09:45:04 baboon iscsimod: NOTICE: iSCSIs: bus 0 tgt 1 lun 0, Cmd 0x5e, Sense: Aug 28 09:45:04 baboon iscsimod: 70000500 0000000a 00000000 20000000 0000 Aug 28 09:45:04 baboon iscsimod: NOTICE: iSCSIs: bus 0 tgt 1 lun 1, Cmd 0x00, Sense: Aug 28 09:45:04 baboon iscsimod: 70000600 0000000a 00000000 29000000 0000 Aug 28 09:45:04 baboon iscsimod: NOTICE: iSCSIs: bus 0 tgt 1 lun 1, Cmd 0x4d, Sense: Aug 28 09:45:04 baboon iscsimod: 70000500 0000000a 00000000 20000000 0000 Aug 28 09:45:04 baboon iscsimod: NOTICE: iSCSIs: bus 0 tgt 1 lun 1, Cmd 0x5e, Sense: Aug 28 09:45:04 baboon iscsimod: 70000500 0000000a 00000000 20000000 0000 Aug 28 09:45:04 baboon iscsimod: NOTICE: iSCSIs: bus 0 tgt 1 lun 2, Cmd 0x00, Sense: Aug 28 09:45:04 baboon iscsimod: 70000600 0000000a 00000000 29000000 0000 Aug 28 09:45:04 baboon iscsimod: NOTICE: iSCSIs: bus 0 tgt 1 lun 2, Cmd 0x4d, Sense: Aug 28 09:45:04 baboon iscsimod: 70000500 0000000a 00000000 20000000 0000 Aug 28 09:45:04 baboon iscsimod: NOTICE: iSCSIs: bus 0 tgt 1 lun 2, Cmd 0x5e, Sense: Aug 28 09:45:04 baboon iscsimod: 70000500 0000000a 00000000 20000000 0000 Aug 28 09:45:05 baboon iscsimod: NOTICE: iSCSIs: bus 0 tgt 0 lun 0, Cmd 0x1c, Sense: Aug 28 09:45:05 baboon iscsimod: 70000500 0000000a 00000000 35010300 0000 bash-2.05# format output AVAILABLE DISK SELECTIONS: 0. c0t0d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248> /pci@1f,4000/scsi@3/sd@0,0 1. c0t1d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248> /pci@1f,4000/scsi@3/sd@1,0 2. c3t0d0 <SEAGATE-ST318203FC-0004 cyl 9770 alt 2 hd 12 sec 303> /iscsipseudo/iscsi@0/sd@0,0 3. c3t1d0 <DGC-RAID0-0632 cyl 5459 alt 2 hd 3 sec 128> /iscsipseudo/iscsi@0/sd@1,0 4. c3t1d1 <DGC-RAID0-0632 cyl 5459 alt 2 hd 3 sec 128> /iscsipseudo/iscsi@0/sd@1,1 5. c3t1d2 <DGC-RAID0-0632 cyl 5459 alt 2 hd 3 sec 128> /iscsipseudo/iscsi@0/sd@1,2 6. c3t2d0 <drive not available> /iscsipseudo/iscsi@0/sd@2,0 !--- After you add the clariion-lun-3-4-5 virtual target on the Cisco MDS 9216. /etc/iscsi.bindings 0 0 san-fc-jbod-1 0 1 clariion 0 2 clariion-lun-3-4-5 bash-2.05#bash-2.05# netstat -n TCP: IPv4 Local Address Remote Address Swind Send-Q Rwind Recv-Q State -------------------- -------------------- ----- ------ ----- ------ ------- 10.48.69.235.32797 10.48.69.199.3260 65535 0 49172 0 TIME_WAIT 10.48.69.235.32798 10.48.69.199.3260 9379072 0 263152 0 ESTABLISHED 10.48.69.235.32799 10.48.69.199.3260 9379072 0 263152 0 ESTABLISHED 10.48.69.235.32800 10.48.69.199.3260 65535 0 49108 0 ESTABLISHED 10.48.69.235.32801 10.48.69.199.3260 9379072 0 263152 0 ESTABLISHED Active UNIX domain sockets Address Type Vnode Conn Local Addr Remote Addr 30002d95c88 dgram 30000205828 00000000 /tmp/portal bash-2.05# devfsadm Aug 28 09:47:58 baboon iscsimod: NOTICE: iSCSIs: bus 0 tgt 2 lun 3, Cmd 0x00, Sense: Aug 28 09:47:58 baboon iscsimod: 70000600 0000000a 00000000 29000000 0000 Aug 28 09:47:58 baboon iscsimod: NOTICE: iSCSIs: bus 0 tgt 2 lun 3, Cmd 0x4d, Sense: Aug 28 09:47:58 baboon iscsimod: 70000500 0000000a 00000000 20000000 0000 Aug 28 09:47:58 baboon iscsimod: NOTICE: iSCSIs: bus 0 tgt 2 lun 3, Cmd 0x5e, Sense: Aug 28 09:47:58 baboon iscsimod: 70000500 0000000a 00000000 20000000 0000 Aug 28 09:47:58 baboon iscsimod: NOTICE: iSCSIs: bus 0 tgt 2 lun 4, Cmd 0x00, Sense: Aug 28 09:47:58 baboon iscsimod: 70000600 0000000a 00000000 29000000 0000 Aug 28 09:47:58 baboon iscsimod: NOTICE: iSCSIs: bus 0 tgt 2 lun 4, Cmd 0x5e, Sense: Aug 28 09:47:58 baboon iscsimod: 70000500 0000000a 00000000 20000000 0000 Aug 28 09:47:58 baboon iscsimod: NOTICE: iSCSIs: bus 0 tgt 2 lun 5, Cmd 0x00, Sense: Aug 28 09:47:58 baboon iscsimod: 70000600 0000000a 00000000 29000000 0000 Aug 28 09:47:58 baboon iscsimod: NOTICE: iSCSIs: bus 0 tgt 2 lun 5, Cmd 0x4d, Sense: Aug 28 09:47:58 baboon iscsimod: 70000500 0000000a 00000000 20000000 0000 Aug 28 09:47:58 baboon iscsimod: NOTICE: iSCSIs: bus 0 tgt 2 lun 5, Cmd 0x5e, Sense: Aug 28 09:47:58 baboon iscsimod: 70000500 0000000a 00000000 20000000 0000 And the format output: 0. c0t0d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248> /pci@1f,4000/scsi@3/sd@0,0 1. c0t1d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248> /pci@1f,4000/scsi@3/sd@1,0 2. c3t0d0 <SEAGATE-ST318203FC-0004 cyl 9770 alt 2 hd 12 sec 303> /iscsipseudo/iscsi@0/sd@0,0 3. c3t1d0 <DGC-RAID0-0632 cyl 5459 alt 2 hd 3 sec 128> /iscsipseudo/iscsi@0/sd@1,0 4. c3t1d1 <DGC-RAID0-0632 cyl 5459 alt 2 hd 3 sec 128> /iscsipseudo/iscsi@0/sd@1,1 5. c3t1d2 <DGC-RAID0-0632 cyl 5459 alt 2 hd 3 sec 128> /iscsipseudo/iscsi@0/sd@1,2 6. c3t2d0 <drive not available> /iscsipseudo/iscsi@0/sd@2,0 7. c3t2d3 <DGC-RAID0-0632 cyl 10920 alt 2 hd 3 sec 128> /iscsipseudo/iscsi@0/sd@2,3 8. c3t2d4 <DGC-RAID0-0632 cyl 5459 alt 2 hd 3 sec 128> /iscsipseudo/iscsi@0/sd@2,4 9. c3t2d5 <DGC-RAID0-0632 cyl 5459 alt 2 hd 3 sec 128> /iscsipseudo/iscsi@0/sd@2,5 !--- Issue the iscsi-ls -v command to see iSCSI driver version. bash-2.05# iscsi-ls -v iSCSI driver version: 3.3.3 !--- Issue the iscsi-ls -l or iscsi-ls commands to see the devices that are currently available. bash-2.05# iscsi-ls -l ******************************************************************************** TARGET NAME san-fc-jbod-1 TARGET ID 0: ADDRESS = 10.48.69.199:3260, 128 STATUS = Connected 10.48.69.235:32798<->10.48.69.199:3260 8/28/2003 09:43:59 SESSION = ISID 00023d000001 TSID 128 PID 463 LUN 0 = DISK c3t0d0 (sd296) 'SEAGATE-ST318203FC-0004' SERIAL# LRE80915 BLOCKS: 35566479 BLOCK SIZE: 512 ******************************************************************************** TARGET NAME clariion TARGET ID 1: ADDRESS = 10.48.69.199:3260, 128 STATUS = Connected 10.48.69.235:32799<->10.48.69.199:3260 8/28/2003 09:43:59 SESSION = ISID 00023d000001 TSID 128 PID 464 LUN 0 = DISK c3t1d0 (sd297) 'DGC-RAID 0-0632' SERIAL# 008E080000CL BLOCKS: 2097023 BLOCK SIZE: 512 LUN 1 = DISK c3t1d1 (sd298) 'DGC-RAID 0-0632' SERIAL# 0127AB0000CL BLOCKS: 2097023 BLOCK SIZE: 512 LUN 2 = DISK c3t1d2 (sd299) 'DGC-RAID 0-0632' SERIAL# 02E4180000CL BLOCKS: 2097023 BLOCK SIZE: 512 ******************************************************************************** TARGET NAME clariion-lun-3-4-5 TARGET ID 2: ADDRESS = 10.48.69.199:3260, 128 STATUS = Connected 10.48.69.235:32801<->10.48.69.199:3260 8/28/2003 09:46:42 SESSION = ISID 00023d000001 TSID 128 PID 482 LUN 0 : SCSI Inquiry failed - Bad file number LUN 3 = DISK c3t2d3 (sd371) 'DGC-RAID 0-0632' SERIAL# 03E0A1E330CL BLOCKS: 4194047 BLOCK SIZE: 512 LUN 4 = DISK c3t2d4 (sd372) 'DGC-RAID 0-0632' SERIAL# 04E9A1E330CL BLOCKS: 2097023 BLOCK SIZE: 512 LUN 5 = DISK c3t2d5 (sd373) 'DGC-RAID 0-0632' SERIAL# 0594B1E330CL BLOCKS: 2097023 BLOCK SIZE: 512 ******************************************************************************** !-- Issue the iscsi-ls -c command to see detailed statistics for currently established iSCSI sessions. bash-2.05# iscsi-ls -c ******************************************************************************** TARGET NAME san-fc-jbod-1 TARGET ID 0: ADDRESS = 10.48.69.199:3260, 128 STATUS = Connected 10.48.69.235:32798<->10.48.69.199:3260 8/28/2003 09:43:59 SESSION = ISID 00023d000001 TSID 128 PID 463 InitialR2T = Yes MaxRecvDataSegmentLength = 131072 Bytes MaxXmitDataSegmentLength = 2048 Bytes FirstBurstLength = 262144 Bytes MaxBurstLength = 16776192 Bytes LoginTimeout = 15 Seconds AuthTimeout = 45 Seconds ActiveTimeout = 5 Seconds IdleTimeout = 60 Seconds PingTimeout = 5 Seconds HeaderDigest = None DataDigest = None ConnFailTimeout = Default MultiPath = None ******************************************************************************** TARGET NAME clariion TARGET ID 1: ADDRESS = 10.48.69.199:3260, 128 STATUS = Connected 10.48.69.235:32799<->10.48.69.199:3260 8/28/2003 09:43:59 SESSION = ISID 00023d000001 TSID 128 PID 464 InitialR2T = Yes MaxRecvDataSegmentLength = 131072 Bytes MaxXmitDataSegmentLength = 2048 Bytes FirstBurstLength = 262144 Bytes MaxBurstLength = 16776192 Bytes LoginTimeout = 15 Seconds AuthTimeout = 45 Seconds ActiveTimeout = 5 Seconds IdleTimeout = 60 Seconds PingTimeout = 5 Seconds HeaderDigest = None DataDigest = None ConnFailTimeout = Default MultiPath = None ******************************************************************************** TARGET NAME clariion-lun-3-4-5 TARGET ID 2: ADDRESS = 10.48.69.199:3260, 128 STATUS = Connected 10.48.69.235:32801<->10.48.69.199:3260 8/28/2003 09:46:42 SESSION = ISID 00023d000001 TSID 128 PID 482 InitialR2T = Yes MaxRecvDataSegmentLength = 131072 Bytes MaxXmitDataSegmentLength = 2048 Bytes FirstBurstLength = 262144 Bytes MaxBurstLength = 16776192 Bytes LoginTimeout = 15 Seconds AuthTimeout = 45 Seconds ActiveTimeout = 5 Seconds IdleTimeout = 60 Seconds PingTimeout = 5 Seconds HeaderDigest = None DataDigest = None ConnFailTimeout = Default MultiPath = None ******************************************************************************** !--- You can see these iSCSI connections in the /var/adm/messages or dmesg: Aug 28 09:43:59 baboon iscsid[454]: [ID 702911 daemon.notice] version 3.3.3 ( 7-Aug-2003) Aug 28 09:43:59 baboon iscsid[463]: [ID 702911 daemon.notice] iSCSI normal session to san-fc-jbod-1 estabished Aug 28 09:43:59 baboon iscsid[463]: [ID 702911 daemon.notice] logged into target san-fc-jbod-1 -- id 0, Initiator sid 00023d000001, target sid 128 Aug 28 09:43:59 baboon iscsid[464]: [ID 702911 daemon.notice] iSCSI normal session to clariion estabished Aug 28 09:43:59 baboon iscsid[464]: [ID 702911 daemon.notice] logged into target clariion -- id 1, Initiator sid 00023d000001, target sid 128 Aug 28 09:45:23 baboon iscsi: [ID 318680 kern.notice] NOTICE: tran_start disabled to bus 0, target 2, lun 0 Aug 28 09:46:42 baboon iscsid[482]: [ID 702911 daemon.notice] iSCSI normal session to clariion-lun-3-4-5 established Aug 28 09:46:42 baboon iscsid[482]: [ID 702911 daemon.notice] logged into target clariion-lun-3-4-5 -- id 2, Initiator sid 00023d000001, target sid 128 |
Canterbury Cisco MDS 9216輸出 |
---|
canterbury#show zone status VSAN: 1 default-zone: permit distribute: active only Interop: Off Full Zoning Database : Zonesets:0 Zones:0 Aliases: 0 Active Zoning Database : Database Not Available Status: Deactivation completed at Fri Aug 22 11:47:53 2003 VSAN: 777 default-zone: permit distribute: active only Interop: Off. Full Zoning Database : Zonesets:0 Zones:0 Aliases: 0 Active Zoning Database : Database Not Available Status: Default zoning policy changed to permit at Mon Aug 25 20:19:31 2003 !--- VSAN 777 has been used for this configuration, and default-zone behavior has been !--- set to permit. canterbury#show flogi da vsan 777 --------------------------------------------------------------------------- INTERFACE VSAN FCID PORT NAME NODE NAME --------------------------------------------------------------------------- fc1/4 777 0x7000e8 21:00:00:20:37:67:f7:a2 20:00:00:20:37:67:f7:a2 fc1/7 777 0x700103 50:06:01:60:88:02:a8:2b 50:06:01:60:11:02:a8:2b iscsi2/1 777 0x700100 21:02:00:0c:30:6c:24:42 21:01:00:0c:30:6c:24:42 Total number of flogi = 3. canterbury#show fcns database vsan 777 VSAN 777: -------------------------------------------------------------------------- FCID TYPE PWWN (VENDOR) FC4-TYPE:FEATURE -------------------------------------------------------------------------- 0x7000e8 NL 21:00:00:20:37:67:f7:a2 (Seagate) scsi-fcp:target 0x700100 N 21:02:00:0c:30:6c:24:42 (Cisco) scsi-fcp:init isc..w 0x700103 N 50:06:01:60:88:02:a8:2b (Clariion) scsi-fcp:target Total number of entries = 3 !--- FCID 0X700100 is the virtual N port (HBA) for the iSCSI host. canterbury#show fcns database detail vsan 777 ------------------------ VSAN:777 FCID:0x7000e8 ------------------------ port-wwn (vendor) :21:00:00:20:37:67:f7:a2 (Seagate) node-wwn :20:00:00:20:37:67:f7:a2 class :3 node-ip-addr :0.0.0.0 ipa :ff ff ff ff ff ff ff ff fc4-types:fc4_features:scsi-fcp:target symbolic-port-name : symbolic-node-name : port-type :NL port-ip-addr :0.0.0.0 fabric-port-wwn :20:04:00:0c:30:6c:24:40 hard-addr :0x000000 ------------------------ VSAN:777 FCID:0x700100 ------------------------ port-wwn (vendor) :21:02:00:0c:30:6c:24:42 (Cisco) node-wwn :21:01:00:0c:30:6c:24:42 class :2,3 node-ip-addr :10.48.69.235 ipa :ff ff ff ff ff ff ff ff fc4-types:fc4_features:scsi-fcp:init iscsi-gw !--- Virtual N port for host. symbolic-port-name : symbolic-node-name :10.48.69.235 port-type :N port-ip-addr :0.0.0.0 fabric-port-wwn :20:41:00:0c:30:6c:24:40 hard-addr :0x000000 ------------------------ VSAN:777 FCID:0x700103 ------------------------ port-wwn (vendor) :50:06:01:60:88:02:a8:2b (Clariion) node-wwn :50:06:01:60:11:02:a8:2b class :3 node-ip-addr :0.0.0.0 ipa :ff ff ff ff ff ff ff ff fc4-types:fc4_features:scsi-fcp:target symbolic-port-name : symbolic-node-name : port-type :N port-ip-addr :0.0.0.0 fabric-port-wwn :20:07:00:0c:30:6c:24:40 hard-addr :0x000000 Total number of entries = 3 canterbury#show vsan membership vsan 777 interfaces: fc1/4 fc1/7 canterbury#show iscsi initiator iSCSI Node name is 10.48.69.235 iSCSI Initiator name: iqn.1987-05.com.cisco:01.894b196796e7 iSCSI alias name: baboon Node WWN is 21:01:00:0c:30:6c:24:42 (dynamic) Member of vsans: 777 Number of Virtual n_ports: 1 Virtual Port WWN is 21:02:00:0c:30:6c:24:42 (dynamic) Interface iSCSI 2/1, Portal group tag: 0x80 VSAN ID 777, FCID 0x700100 canterbury#show iscsi initiator detail iSCSI Node name is 10.48.69.235 iSCSI Initiator name: iqn.1987-05.com.cisco:01.894b196796e7 iSCSI alias name: baboon Node WWN is 21:01:00:0c:30:6c:24:42 (dynamic) Member of vsans: 777 Number of Virtual n_ports: 1 Virtual Port WWN is 21:02:00:0c:30:6c:24:42 (dynamic) Interface iSCSI 2/1, Portal group tag is 0x80 VSAN ID 777, FCID 0x700100 2 FC sessions, 3 iSCSI sessions iSCSI session details Target: san-fc-jbod-1 Statistics: PDU: Command: 24, Response: 24 Bytes: TX: 3504, RX: 0 Number of connection: 1 TCP parameters Local 10.48.69.199:3260, Remote 10.48.69.235:32798 Path MTU: 1500 bytes Retransmission timeout: 300 ms Round trip time: Smoothed 4 ms, Variance: 6 Advertized window: Current: 256 KB, Maximum: 257 KB, Scale: 3 Peer receive window: Current: 9159 KB, Maximum: 9159 KB, Scale: 8 Congestion window: Current: 11 KB Target: clariion-lun-3-4-5 Statistics: PDU: Command: 73, Response: 73 Bytes: TX: 9740, RX: 0 Number of connection: 1 TCP parameters Local 10.48.69.199:3260, Remote 10.48.69.235:32801 Path MTU: 1500 bytes Retransmission timeout: 300 ms Round trip time: Smoothed 7 ms, Variance: 13 Advertized window: Current: 256 KB, Maximum: 257 KB, Scale: 3 Peer receive window: Current: 9159 KB, Maximum: 9159 KB, Scale: 8 Congestion window: Current: 11 KB Target: clariion Statistics: PDU: Command: 101, Response: 101 Bytes: TX: 14828, RX: 0 Number of connection: 1 TCP parameters Local 10.48.69.199:3260, Remote 10.48.69.235:32799 Path MTU: 1500 bytes Retransmission timeout: 300 ms Round trip time: Smoothed 2 ms, Variance: 1 Advertised window: Current: 256 KB, Maximum: 257 KB, Scale: 3 Peer receive window: Current: 9159 KB, Maximum: 9159 KB, Scale: 8 Congestion window: Current: 11 KB FCP Session details Target FCID: 0x7000e8 (S_ID of this session: 0x700100) pWWN: 21:00:00:20:37:67:f7:a2, nWWN: 20:00:00:20:37:67:f7:a2 Session state: LOGGED_IN 1 iSCSI sessions share this FC session Target: san-fc-jbod-1 Negotiated parameters RcvDataFieldSize 2048 our_RcvDataFieldSize 2048 MaxBurstSize 0, EMPD: FALSE Random Relative Offset: FALSE, Sequence-in-order: Yes Statistics: PDU: Command: 0, Response: 24 Target FCID: 0x700103 (S_ID of this session: 0x700100) pWWN: 50:06:01:60:88:02:a8:2b, nWWN: 50:06:01:60:11:02:a8:2b Session state: LOGGED_IN 2 iSCSI sessions share this FC session Target: clariion-lun-3-4-5 Target: clariion Negotiated parameters RcvDataFieldSize 1024 our_RcvDataFieldSize 2048 MaxBurstSize 0, EMPD: FALSE Random Relative Offset: FALSE, Sequence-in-order: Yes Statistics: PDU: Command: 0, Response: 174 canterbury#show iscsi initiator iscsi-session detail iSCSI Node name is 10.48.69.235 iSCSI Initiator name: iqn.1987-05.com.cisco:01.894b196796e7 iSCSI alias name: baboon Node WWN is 21:01:00:0c:30:6c:24:42 (dynamic) Member of vsans: 777 Number of Virtual n_ports: 1 Virtual Port WWN is 21:02:00:0c:30:6c:24:42 (dynamic) Interface iSCSI 2/1, Portal group tag is 0x80 VSAN ID 777, FCID 0x700100 2 FC sessions, 3 iSCSI sessions iSCSI session details Target: san-fc-jbod-1 Statistics: PDU: Command: 24, Response: 24 Bytes: TX: 3504, RX: 0 Number of connection: 1 TCP parameters Local 10.48.69.199:3260, Remote 10.48.69.235:32798 Path MTU: 1500 bytes Retransmission timeout: 300 ms Round trip time: Smoothed 4 ms, Variance: 6 Advertized window: Current: 256 KB, Maximum: 257 KB, Scale: 3 Peer receive window: Current: 9159 KB, Maximum: 9159 KB, Scale: 8 Congestion window: Current: 11 KB Target: clariion-lun-3-4-5 Statistics: PDU: Command: 73, Response: 73 Bytes: TX: 9740, RX: 0 Number of connection: 1 TCP parameters Local 10.48.69.199:3260, Remote 10.48.69.235:32801 Path MTU: 1500 bytes Retransmission timeout: 300 ms Round trip time: Smoothed 7 ms, Variance: 13 Advertized window: Current: 256 KB, Maximum: 257 KB, Scale: 3 Peer receive window: Current: 9159 KB, Maximum: 9159 KB, Scale: 8 Congestion window: Current: 11 KB Target: clariion Statistics: PDU: Command: 101, Response: 101 Bytes: TX: 14828, RX: 0 Number of connection: 1 TCP parameters Local 10.48.69.199:3260, Remote 10.48.69.235:32799 Path MTU: 1500 bytes Retransmission timeout: 300 ms Round trip time: Smoothed 2 ms, Variance: 1 Advertized window: Current: 256 KB, Maximum: 257 KB, Scale: 3 Peer receive window: Current: 9159 KB, Maximum: 9159 KB, Scale: 8 Congestion window: Current: 11 KB canterbury#show iscsi initiator fcp-session detail iSCSI Node name is 10.48.69.235 iSCSI Initiator name: iqn.1987-05.com.cisco:01.894b196796e7 iSCSI alias name: baboon Node WWN is 21:01:00:0c:30:6c:24:42 (dynamic) Member of vsans: 777 Number of Virtual n_ports: 1 Virtual Port WWN is 21:02:00:0c:30:6c:24:42 (dynamic) Interface iSCSI 2/1, Portal group tag is 0x80 VSAN ID 777, FCID 0x700100 2 FC sessions, 3 iSCSI sessions FCP Session details Target FCID: 0x7000e8 (S_ID of this session: 0x700100) pWWN: 21:00:00:20:37:67:f7:a2, nWWN: 20:00:00:20:37:67:f7:a2 Session state: LOGGED_IN 1 iSCSI sessions share this FC session Target: san-fc-jbod-1 Negotiated parameters RcvDataFieldSize 2048 our_RcvDataFieldSize 2048 MaxBurstSize 0, EMPD: FALSE Random Relative Offset: FALSE, Sequence-in-order: Yes Statistics: PDU: Command: 0, Response: 24 Target FCID: 0x700103 (S_ID of this session: 0x700100) pWWN: 50:06:01:60:88:02:a8:2b, nWWN: 50:06:01:60:11:02:a8:2b Session state: LOGGED_IN 2 iSCSI sessions share this FC session Target: clariion-lun-3-4-5 Target: clariion Negotiated parameters RcvDataFieldSize 1024 our_RcvDataFieldSize 2048 MaxBurstSize 0, EMPD: FALSE Random Relative Offset: FALSE, Sequence-in-order: Yes Statistics: PDU: Command: 0, Response: 174 canterbury#show ips stats tcp interface gigabitethernet 2/1 detail TCP Statistics for port GigabitEthernet2/1 TCP send stats 28621 segments, 4231096 bytes 15842 data, 12335 ack only packets 168 control (SYN/FIN/RST), 0 probes, 210 window updates 66 segments retransmitted, 63724 bytes 66 retransmitted while on ethernet send queue, 1127 packets split 480 delayed acks sent TCP receive stats 36728 segments, 12911 data packets in sequence, 2668162 bytes in sequence 0 predicted ack, 12050 predicted data 0 bad checksum, 0 multi/broadcast, 0 bad offset 0 no memory drops, 0 short segments 48 duplicate bytes, 1 duplicate packets 0 partial duplicate bytes, 0 partial duplicate packets 0 out-of-order bytes, 164 out-of-order packets 0 packet after window, 0 bytes after window 0 packets after close 12621 acks, 3486850 ack bytes, 0 ack toomuch, 11652 duplicate acks 0 ack packets left of snd_una, 6 non-4 byte aligned packets 8333 window updates, 0 window probe 624 pcb hash miss, 79 no port, 0 bad SYN, 0 paws drops TCP Connection Stats 0 attempts, 231 accepts, 231 established 227 closed, 14 drops, 0 conn drops 0 drop in retransmit timeout, 2 drop in keepalive timeout 0 drop in persist drops, 0 connections drained TCP Miscellaneous Stats 11761 segments timed, 12027 rtt updated 51 retransmit timeout, 304 persist timeout 10452 keepalive timeout, 10450 keepalive probes TCP SACK Stats 0 recovery episodes, 0 data packets, 0 data bytes 0 data packets retransmitted, 0 data bytes retransmitted 0 connections closed, 0 retransmit timeouts TCP SYN Cache Stats 233 entries, 231 connections completed, 1 entries timed out 0 dropped due to overflow, 1 dropped due to RST 0 dropped due to ICMP unreach, 0 dropped due to bucket overflow 0 abort due to no memory, 4 duplicate SYN, 76 no-route SYN drop 0 hash collisions, 0 retransmitted TCP Active Connections Local Address Remote Address State Send-Q Recv-Q 10.48.69.199:3260 10.48.69.235:32798 ESTABLISH 0 0 10.48.69.199:3260 10.48.69.235:32799 ESTABLISH 0 0 10.48.69.199:3260 10.48.69.235:32800 ESTABLISH 0 0 10.48.69.199:3260 10.48.69.235:32801 ESTABLISH 0 0 0.0.0.0:3260 0.0.0.0:0 LISTEN 0 0 canterbury#show iscsi virtual-target configured target: san-fc-jbod-1 * Port WWN 21:00:00:20:37:67:f7:a2 !--- The * means that you have both discovery and target sessions. !--- You only have a discovery session if there is no * in front of the pWWN. Configured node No. of advertised interface: 1 GigabitEthernet 2/1 No. of initiators permitted: 3 initiator iqn.1987-05.com.cisco.02.89451e183581.mcandege-w2k1 is permitted initiator 10.48.69.235/32 is permitted initiator 10.48.69.232/32 is permitted all initiator permit is disabled target: clariion * Port WWN 50:06:01:60:88:02:a8:2b Configured node No. of LU mapping: 3 iSCSI LUN: 0000, FC LUN: 0000 iSCSI LUN: 0001, FC LUN: 0001 iSCSI LUN: 0002, FC LUN: 0002 No. of advertised interface: 1 GigabitEthernet 2/1 No. of initiators permitted: 1 initiator 10.48.69.235/32 is permitted all initiator permit is disabled target: clariion-lun-3-4-5 * Port WWN 50:06:01:60:88:02:a8:2b Configured node No. of LU mapping: 3 iSCSI LUN: 0003, FC LUN: 0003 iSCSI LUN: 0004, FC LUN: 0004 iSCSI LUN: 0005, FC LUN: 0005 No. of advertised interface: 1 GigabitEthernet 2/1 No. of initiators permitted: 1 initiator 10.48.69.235/32 is permitted all initiator permit is disabled canterbury#show iscsi initiator configured iSCSI Node name is 10.48.69.235 Member of vsans: 777 canterbury#show ips arp interface gigabitethernet 2/1 Protocol Address Age (min) Hardware Addr Type Interface Internet 10.48.69.200 0 0008.e21e.c7bc ARPA GigabitEthernet2/1 Internet 10.48.69.206 7 0005.9ba6.95ff ARPA GigabitEthernet2/1 Internet 10.48.69.209 4 0009.7c60.561f ARPA GigabitEthernet2/1 Internet 10.48.69.226 0 0060.08f6.bc1a ARPA GigabitEthernet2/1 Internet 10.48.69.229 15 0800.209e.edab ARPA GigabitEthernet2/1 Internet 10.48.69.233 0 0010.4200.7d5b ARPA GigabitEthernet2/1 Internet 10.48.69.235 9 0800.20b6.6559 ARPA GigabitEthernet2/1 Internet 10.48.69.238 5 0030.6e1b.6f51 ARPA GigabitEthernet2/1 Internet 10.48.69.239 12 0030.6e1c.a00b ARPA GigabitEthernet2/1 Internet 10.48.69.248 5 0202.3d30.45f8 ARPA GigabitEthernet2/1 Internet 10.48.69.252 1 0202.3d30.45fc ARPA GigabitEthernet2/1 Internet 10.10.2.28 9 0202.3d0a.021c ARPA GigabitEthernet2/1 canterbury#show scsi-target devices vsan 777 -------------------------------------------------------------------------------- VSAN FCID PWWN VENDOR MODEL REV -------------------------------------------------------------------------------- 777 0x7000e8 21:00:00:20:37:67:f7:a2 SEAGATE ST318203FC 0004 777 0x700103 50:06:01:60:88:02:a8:2b DGC RAID 0 0632 canterbury#show scsi-target lun vsan 777 - ST318203FC from SEAGATE (Rev 0004) FCID is 0x7000e8 in VSAN 777, PWWN is 21:00:00:20:37:67:f7:a2 ------------------------------------------------------------------------------ LUN Capacity Status Serial Number Device-Id (MB) ------------------------------------------------------------------------------ 0x0 18210 Online LRE8091500007039 C:1 A:0 T:3 20:00:00:20:37:67:f7:a2 - RAID from DGC (Rev 0632) FCID is 0x700103 in VSAN 777, PWWN is 50:06:01:60:88:02:a8:2b ------------------------------------------------------------------------------ LUN Capacity Status Serial Number Device-Id (MB) ------------------------------------------------------------------------------ 0x0 1074 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b da:05:b6:a9:b6:9d:7b:00 C:1 A:0 T:0 00:00:00:00 0x1 1074 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b 6a:66:0d:74:cb:33:88:6c C:1 A:0 T:0 00:01:00:00 0x2 1074 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b ec:81:5b:a2:c4:43:0d:8a C:1 A:0 T:0 00:02:00:00 0x3 2147 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b e0:47:b3:be:3b:00:e0:d5 C:1 A:0 T:0 00:03:00:00 0x4 1074 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b 00:51:5b:7f:3d:9a:7b:ce C:1 A:0 T:0 00:04:00:00 0x5 1074 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b ab:b1:ae:80:59:c0:fc:f0 C:1 A:0 T:0 00:05:00:00 0x6 1074 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b ad:91:58:af:d2:fd:c7:47 C:1 A:0 T:0 00:06:00:00 0x7 1074 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b b1:ef:e7:6c:44:5c:16:97 C:1 A:0 T:0 00:07:00:00 0x8 1074 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b 84:4f:09:60:30:1e:fc:50 C:1 A:0 T:0 00:08:00:00 0x9 1074 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b aa:6d:e2:0e:ce:7a:cc:21 C:1 A:0 T:0 00:09:00:00 0xa 1074 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b 5b:66:67:89:6c:f2:d1:56 C:1 A:0 T:0 00:0a:00:00 0xb 1074 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b a9:32:bd:04:4a:bb:3d:9b C:1 A:0 T:0 00:0b:00:00 0xc 1074 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b cd:d9:96:f7:57:3f:07:0c C:1 A:0 T:0 00:0c:00:00 0xd 1074 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b 0c:e5:ba:39:68:ca:d6:f0 C:1 A:0 T:0 00:0d:00:00 0xe 1074 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b 60:6e:ee:76:98:fc:ab:97 C:1 A:0 T:0 00:0e:00:00 0xf 1074 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b 8b:58:80:7b:12:fb:6b:12 C:1 A:0 T:0 00:0f:00:00 0x10 1074 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b a1:2f:6d:b0:c3:d6:c2:46 C:1 A:0 T:0 00:10:00:00 0x11 1074 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b 2c:48:c4:74:25:4b:26:dd C:1 A:0 T:0 00:11:00:00 0x20 5369 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b ba:18:6a:40:22:40:94:75 C:1 A:0 T:0 00:20:00:00 0x21 3221 Online f60004202091 C:1 A:0 T:3 60:06:01:60:88:02:a8:2b 74:d2:42:9e:31:8d:ff:86 C:1 A:0 T:0 00:21:00:00 canterbury#show interface iscsi 2/1 iscsi2/1 is up Hardware is GigabitEthernet Port WWN is 20:41:00:0c:30:6c:24:40 Admin port mode is ISCSI Port mode is ISCSI Speed is 1 Gbps iSCSI initiator is identified by name Number of iSCSI session: 4, Number of TCP connection: 4 Configured TCP parameters Local Port is 3260 PMTU discover is enabled, reset timeout is 3600 sec Keepalive-timeout is 60 sec Minimum-retransmit-time is 300 ms Max-retransmissions 4 Sack is disabled Maximum allowed bandwidth is 800000 kbps Minimum available bandwidth is 800000 kbps Estimated round trip time is 100000 usec 5 minutes input rate 168 bits/sec, 21 bytes/sec, 0 frames/sec 5 minutes output rate 728 bits/sec, 91 bytes/sec, 0 frames/sec iSCSI statistics Input 12209 packets, 2668348 bytes Command 3282 pdus, Data-out 1038 pdus, 1989664 bytes Output 14762 packets, 3486596 bytes Response 3059 pdus (with sense 77), R2T 153 pdus Data-in 3215 pdus, 2744116 bytes canterbury#show iscsi stats iscsi 2/1 iscsi2/1 5 minutes input rate 168 bits/sec, 21 bytes/sec, 0 frames/sec 5 minutes output rate 728 bits/sec, 91 bytes/sec, 0 frames/sec iSCSI statistics 12209 packets input, 2668348 bytes Command 3282 pdus, Data-out 1038 pdus, 1989664 bytes, 0 fragments output 14762 packets, 3486596 bytes Response 3059 pdus (with sense 77), R2T 153 pdus Data-in 3215 pdus, 2744116 bytes canterbury#show interface gigabitethernet 2/1 GigabitEthernet2/1 is up Hardware is GigabitEthernet, address is 0005.3000.ade6 Internet address is 10.48.69.199/26 MTU 2156 bytes Port mode is IPS Speed is 1 Gbps Beacon is turned off Auto-Negotiation is turned on iSCSI authentication: NONE 5 minutes input rate 392 bits/sec, 49 bytes/sec, 0 frames/sec 5 minutes output rate 64 bits/sec, 8 bytes/sec, 0 frames/sec 126128 packets input, 12476013 bytes 2 multicast frames, 0 compressed 0 input errors, 0 frame, 0 overrun 0 fifo 43443 packets output, 6256174 bytes, 0 underruns 0 output errors, 0 collisions, 0 fifo 0 carrier errors canterbury#show ip route Codes: C - connected, S - static Gateway of last resort is 10.48.69.129 C 10.48.69.192/26 is directly connected, gigabitethernet2-1 C 10.48.69.128/26 is directly connected, mgmt0 |
本節提供MDS交換矩陣管理器1.1(2)和裝置管理器1.1.(2)的輸出示例。
Fabric Manager中的拓撲圖
這是Canterbury上裝置管理器1.1(2)檢視的示例螢幕快照。
在「裝置管理器」視窗中選擇FC > LUN,以顯示LUN的pWWN、LUN ID和容量。
選擇IP > iSCSI以顯示iSCSI會話。
修訂 | 發佈日期 | 意見 |
---|---|---|
1.0 |
08-Oct-2018 |
初始版本 |