Standardmäßiges Zurücksetzen
Das einfache Zurücksetzen eines Cisco IP-Telefon bietet eine Möglichkeit zur Wiederherstellung, wenn das Telefon einen Fehler aufweist. Das Zurücksetzen bietet eine Möglichkeit, verschiedene Konfigurations- und Sicherheitseinstellungen zurückzusetzen oder wiederherzustellen.
In der folgenden Tabelle sind die verschiedenen Methoden zum einfachen Zurücksetzen beschrieben. Sie können ein Telefon mit einem dieser Vorgänge zurücksetzen, nachdem das Telefon gestartet wurde. Wählen Sie den Vorgang aus, der für Ihre Situation zutreffend ist.
Vorgang |
Aktion |
Erklärung |
---|---|---|
Telefon neu starten |
Drücken Sie Services (Dienste), Anwendungen oder Verzeichnisse und dann **#**. Drücken Sie Einstellungen und wählen Sie aus. |
Daraufhin werden alle vorgenommenen Benutzer- und Netzwerk-Setup-Änderungen, die vom Telefon nicht in den Flash-Speicher geschrieben wurden, auf die zuletzt gespeicherten Einstellungen zurückgesetzt, und anschließend wird das Telefon neu gestartet. |
Einstellungen zurücksetzen |
Drücken Sie Einstellungen und wählen Sie aus. |
Setzt die Konfiguration bzw. Einstellungen für das Telefon auf die Werkseinstellungen zurück. |
Um Einstellungen zurückzusetzen, drücken Sie aus. |
Setzt die Konfiguration bzw. Einstellungen für das Telefon auf die Standardeinstellungen zurück. |
Zurücksetzen auf die Werkseinstellungen mit dem Tastenfeld des Telefons
Um das Telefon über das Tastenfeld des Telefons auf die Werkseinstellungen zurückzusetzen, führen Sie die folgenden Schritte aus:
Vorbereitungen
Sie müssen wissen, ob es sich bei Ihrem Telefon um eine Original-Hardwareversion handelt oder ob die Hardware aktualisiert und erneut freigegeben wurde.
Prozedur
Schritt 1 |
Stecken Sie das Telefon aus:
|
Schritt 2 |
Warten Sie 5 Sekunden lang. |
Schritt 3 |
Bei früheren Hardwareversionen leuchtet die Stummschaltungstaste. Warten Sie, bis die Stummschaltungstaste erlischt. |
Alle Einstellungen über das Telefonmenü zurücksetzen
Um das Telefon auf die Werkseinstellungen zurückzusetzen, führen Sie die folgenden Schritte aus.
Prozedur
Schritt 1 |
Drücken Sie Anwendungen. |
Schritt 2 |
Wählen Sie aus.Entsperren Sie gegebenenfalls die Telefonoptionen. |
Die Werkseinstellungen über das Telefonmenü wiederherstellen
Prozedur
Schritt 1 |
Drücken Sie Anwendungen. |
Schritt 2 |
Wählen Sie aus. |
Schritt 3 |
Navigieren Sie zu Alle aus. und wählen Sie |
Schritt 4 |
Um die Telefonkonfiguration oder die Standard-Werkseinstellungen wiederherzustellen, drücken Sie OK. |
Angepasstes Zurücksetzen über das Telefonmenü
Prozedur
Schritt 1 |
Drücken Sie Anwendungen. |
Schritt 2 |
Navigieren Sie zu Administratoreinstellungen und wählen Sie Angepasstes Zurücksetzen aus. |
Schritt 3 |
Um die Standard-Telefonkonfiguration oder die Standardeinstellungen wiederherzustellen, drücken Sie OK. |
Ihr Telefon über das Backup-Image neu starten
Ihr Cisco IP Phone besitzt ein zweites Backup-Image, mit dem Sie das Telefon wiederherstellen können, wenn das Standard-Image beschädigt wurde.
Gehen Sie wie folgt vor, um Ihr Telefon über das Backup neu zu starten.
Prozedur
Schritt 1 |
Trennen Sie die Stromversorgung. |
Schritt 2 |
Halten Sie die Rautetaste (#) gedrückt. |
Schritt 3 |
Schließen Sie die Stromversorgung wieder an. Halten Sie weiterhin die Rautetaste gedrückt, bis die Tasten Lautsprecher und Headset grün leuchten. |
Schritt 4 |
Lassen Sie die Rautetaste los. |