Phone-UI-User-Mode (Benutzermodus der Telefonbenutzeroberfläche)
|
Dieser Parameter funktioniert nur mit dem Benutzer, der auf das Attribut (UA) zugreift, das einer Element-Marke in der Konfigurationsdatei (cfg. Xml) angehängt ist. Sie können die Parameter einschränken,
die den Telefonbenutzern auf dem Telefondisplay angezeigt werden.
Wenn er auf Ja festgelegt ist, können Sie das Attribut UA verwenden, um den Zugriff des Benutzers auf bestimmte Parameter im Menü des Telefonbildschirms zu steuern. Wenn auf Nein festgelegt funktioniert das Attribut UA nicht.
Die Optionen für das Attribut UA sind „na“, „ro“ und „rw“. Parameter, die als „na“ festgelegt wurden, werden nicht auf dem Telefonbildschirm angezeigt. Parameter,
die als „ro“ gekennzeichnet sind, können nicht vom Benutzer bearbeitet werden. Parameter, die als „rw“ gekennzeichnet sind,
können vom Benutzer bearbeitet werden.
Führen Sie eine der folgenden Aktionen aus:
-
Geben Sie in der Konfigurationsdatei des Telefons eine Zeichenfolge mit XML (cfg.xml) in folgendem Format ein: <Phone-UI-User-Mode ua="na">Nein</Phone-UI-User-Mode>
-
Legen Sie auf der Weboberfläche des Telefons auf Ja fest, und legen Sie dann das Attribut UA des gewünschten Parameters in der Telefonkonfigurationsdatei fest.
Beispiel: <Phone-UI-User-Mode ua="na">Yes</Phone-UI-User-Mode>
<Enable_VLAN ua="ro">Yes</Enable_VLAN>
<Preferred_Audio_Device ua="rw">Headset</Preferred_Audio_Device>
<Block_ANC_Setting ua="na">Yes</Block_ANC_Setting>
Mit den Einstellungen im Beispiel kann der Benutzer Folgendes tun:
-
Kann die Einstellung von VLAN (Enable_VLAN ) im Menü des Telefonbildschirms anzeigen, aber nicht ändern.
-
Kann die Einstellung Bevorzugtes Audiogerät (Preferred_Audio_Device ) ändern
-
Das Menüelement Anonymen Anruf blockieren (Block_ANC_Setting ) kann nicht auf dem Telefonbildschirm angezeigt werden.
Zulässige Werte: Ja|Nein
Standard: Nein
|