Cisco Nexus 9000 Series NX-OS Layer 2 Switching Configuration Guide, Release 10.5(x)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: July 26, 2024

New and Changed Information

This table summarizes the new and changed features for the Cisco Nexus 9000 Series NX-OS Layer 2 Switching Configuration Guide, Release 10.5(x) and where they are documented.

Table 1. New and Changed Features
Feature	Description	Changed in Release	Where Documented
MAC learning disable at VLAN level	Added a new command no mac-learn vlan to disable MAC learning on the VLAN.	10.5(1)F	Disabling MAC Learning Per VLAN
system routing template-l2-heavy - Template support on FX3 platforms	Added support for system routing template-l2-heavy on FX/FX2/FX3 platforms.	10.5(1)F	Configuring L2 Heavy Mode

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)