Step 1 |
enable
Example:
|
Enables
privileged EXEC mode.
|
Step 2 |
configure
terminal
Example:
Device# configure terminal
|
Enters global
configuration mode.
|
Step 3 |
ip
sla
operation-number
Example:
Device(config)# ip sla 10
|
Begins
configuration for an IP SLAs operation and enters IP SLA configuration mode.
|
Step 4 |
dhcp
{destination-ip-address | destination-hostname} [source-ip {ip-address | hostname}]
Example:
Device(config-ip-sla)# dhcp 10.10.10.3
|
Defines a DHCP operation and enters IP SLA DHCP configuration mode.
|
Step 5 |
history
buckets-kept
size
Example:
Device(config-ip-sla-dhcp)# history buckets-kept 25
|
(Optional) Sets
the number of history buckets that are kept during the lifetime of an IP SLAs
operation.
|
Step 6 |
history
distributions-of-statistics-kept
size
Example:
Device(config-ip-sla-dhcp)# history distributions-of-statistics-kept 5
|
(Optional) Sets
the number of statistics distributions kept per hop during an IP SLAs
operation.
|
Step 7 |
history
enhanced
[interval
seconds]
[buckets
number-of-buckets]
Example:
Device(config-ip-sla-dhcp)# history enhanced interval 900 buckets 100
|
(Optional)
Enables enhanced history gathering for an IP SLAs operation.
|
Step 8 |
history
filter
{none |
all |
overThreshold
|
failures}
Example:
Device(config-ip-sla-dhcp)# history filter failures
|
(Optional)
Defines the type of information kept in the history table for an IP SLAs
operation.
|
Step 9 |
frequency
seconds
Example:
Device(config-ip-sla-dhcp)# frequency 30
|
(Optional)
Sets the rate at which a specified IP SLAs operation repeats.
|
Step 10 |
history
hours-of-statistics-kept
hours
Example:
Device(config-ip-sla-dhcp)# history hours-of-statistics-kept 4
|
(Optional)
Sets the number of hours for which statistics are maintained for an IP SLAs
operation.
|
Step 11 |
history
lives-kept
lives
Example:
Device(config-ip-sla-dhcp)# history lives-kept 5
|
(Optional)
Sets the number of lives maintained in the history table for an IP SLAs
operation.
|
Step 12 |
owner
owner-id
Example:
Device(config-ip-sla-dhcp)# owner admin
|
(Optional)
Configures the Simple Network Management Protocol (SNMP) owner of an IP SLAs
operation.
|
Step 13 |
history
statistics-distribution-interval
milliseconds
Example:
Device(config-ip-sla-dhcp)# history statistics-distribution-interval 10
|
(Optional)
Sets the time interval for each statistics distribution kept for an IP SLAs
operation.
|
Step 14 |
tag
text
Example:
Device(config-ip-sla-dhcp)# tag TelnetPollServer1
|
(Optional)
Creates a user-specified identifier for an IP SLAs operation.
|
Step 15 |
threshold
milliseconds
Example:
Device(config-ip-sla-dhcp)# threshold 10000
|
(Optional)
Sets the upper threshold value for calculating network monitoring statistics
created by an IP SLAs operation.
|
Step 16 |
timeout
milliseconds
Example:
Device(config-ip-sla-dhcp)# timeout 10000
|
(Optional)
Sets the amount of time an IP SLAs operation waits for a response from its
request packet.
|
Step 17 |
end
Example:
Device(config-ip-sla-dhcp)# end
|
Exits to
privileged EXEC mode.
|