- L2VPN Protocol-Based CLIs
- Any Transport over MPLS
- L2VPN Interworking
- L2VPN Pseudowire Preferential Forwarding
- L2VPN Multisegment Pseudowires
- MPLS Quality of Service
- QoS Policy Support for L2VPN ATM PVPs
- MPLS Pseudowire Status Signaling
- L2VPN VPLS Inter-AS Option B
- AToM Static Pseudowire Provisioning
- MPLS MTU Command Changes
- L2VPN Pseudowire Redundancy
- L2VPN Pseudowire Switching
- VPLS MAC Address Withdrawal
- Hot Standby Pseudowire Support for ATM and TDM Access Circuits
- Configuring Virtual Private LAN Services
- Routed Pseudo-Wire and Routed VPLS
- VPLS Autodiscovery BGP Based
- QoS Policies for VFI Pseudowires
- VPLS BGP Signaling L2VPN Inter-AS Option B
- Loop-Free Alternate Fast Reroute with L2VPN
Contents
- QoS Policies for VFI Pseudowires
- Finding Feature Information
- Restrictions for QoS Policies for VFI Pseudowires
- Information About QoS Policies for VFI Pseudowires
- QoS Policies for VFI Pseudowires
- How to Configure QoS Policies for VFI Pseudowires
- Configuring QoS Policies for Pseudowires
- Creating a Hierarchical Policy for VFI Pseudowires
- Attaching a Policy Map to a VFI Pseudowire
- Configuring VFI with Two Pseudowire Members with Different QoS Policies
- Configuring VFI with Two Pseudowire Members with the Same QoS Policy
- Configuring VFI with Auto Discovered Pseudowires
- Configuration Examples for QoS Policies for VFI Pseudowires
- Example: Configuring QoS Policies for Pseudowires
- Example: Configuring VFI with Two Pseudowire Members with Different QoS Policies
- Example: Configuring VFI with Two Pseudowire Members with the Same QoS Policy
- Example: Configuring VFI with Auto Discovered Pseudowires
- Example: Displaying Pseudowire Policy Map Information
- Additional References for QoS Policies for VFI Pseudowires
- Feature Information For QoS Policies for VFI Pseudowires
QoS Policies for VFI Pseudowires
- Finding Feature Information
- Restrictions for QoS Policies for VFI Pseudowires
- Information About QoS Policies for VFI Pseudowires
- How to Configure QoS Policies for VFI Pseudowires
- Configuration Examples for QoS Policies for VFI Pseudowires
- Additional References for QoS Policies for VFI Pseudowires
- Feature Information For QoS Policies for VFI Pseudowires
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest caveats and feature information, see Bug Search Tool and the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the feature information table at the end of this module.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Restrictions for QoS Policies for VFI Pseudowires
Information About QoS Policies for VFI Pseudowires
QoS Policies for VFI Pseudowires
QoS policies are specified on individual pseudowire interfaces and are applied only to the corresponding pseudowires. It is possible to specify different QoS policies on different pseudowire members of the same virtual forwarding interface (VFI) or on the subset of the pseudowires. There may be one or more pseudowires configured per VFI. Both manually configured and auto discovered pseudowire configurations are supported.
QoS policies are specified using a pseudowire template. The template can be applied on multiple pseudowires of the same, or different, VFIs. All those pseudowires get the same QoS policy applied as specified in the template. For auto-discovered pseudowires, QoS policies can only be specified using a pseudowire template.
The QoS Policies for VFI Pseudowires feature supports both ingress and egress policies and traffic classification can be done based on different match criteria.
How to Configure QoS Policies for VFI Pseudowires
Configuring QoS Policies for Pseudowires
Perform this task to configure QoS policies for pseudowires.
1.
enable
2.
configure
terminal
3.
policy-map
policy-map-name
4.
class
class-map-name
5.
priority
bandwidth-kbps
6.
exit
7.
class
class-map-name
8.
bandwidth
percent
percentage
9.
exit
10.
class
class-map-name
11.
police
cir
bps
12.
exit
13.
class
class-map-name
14.
shape
average
bps
15.
queue-limit
queue-limit size
packets
16.
random-detect
17.
exit
18.
exit
19.
policy-map
policy-map-name
20.
class
class-map-name
21.
shape
average
bps
22.
service-policy
policy-map
23.
exit
24.
exit
25.
policy-map
policy-map-name
26.
class
class-map-name
27.
shape
average
bps
28.
exit
29.
exit
30.
policy-map
policy-map-name
31.
class
class-map-name
32.
shape
average
bps
33.
exit
34.
exit
35.
exit
policy-map
policy-map-name
36.
class
class-map-name
37.
shape
average
bps
38.
exit
39.
exit
40.
policy-map
policy-map-name
41.
class
class-map-name
42.
police
bps
43.
interface
pseudowire
number
44.
encap
mpls
45.
neighbor
peer-address
vcid-value
46.
service-policy
input
policy-map-name
47.
service-policy
output
policy-map-name
48.
interface
gigabit ethernet
number
49.
service-policy
output
policy-map-name
DETAILED STEPS
Creating a Hierarchical Policy for VFI Pseudowires
Perform this task to create a hierarchical policy for VFI Pseudowires.
1.
enable
2.
configure
terminal
3.
policy-map
policy-map-name
4.
class
class-map-name
5.
shape
average
bps
6.
service-policy
policy-map
7.
exit
8.
exit
9.
policy-map
policy-map-name
10.
class
class-map-name
11.
shape
average
bps
12.
exit
13.
exit
14.
policy-map
policy-map-name
15.
class
class-map-name
16.
shape
average
bps
17.
exit
18.
exit
19.
exit
policy-map
policy-map-name
20.
class
class-map-name
21.
shape
average
bps
22.
exit
23.
exit
DETAILED STEPS
| Command or Action | Purpose | |||
|---|---|---|---|---|
| Step 1 |
enable
Example: Device> enable |
Enables privileged EXEC mode.
| ||
| Step 2 |
configure
terminal
Example: Device# configure terminal |
Enters global configuration mode. | ||
| Step 3 |
policy-map
policy-map-name
Example: Device(config)# policy-map gold-policy-hqos |
Creates a policy map to specify a service policy. | ||
| Step 4 |
class
class-map-name
Example: Device(config-pmap)# class class-default |
Specifies the name of the class map. | ||
| Step 5 |
shape
average
bps
Example: Device(config-pmap-c)# shape average 10000 |
Shapes traffic to the indicated bit rate. | ||
| Step 6 |
service-policy
policy-map
Example: Device(config-pmap-c)# service-policy gold-policy-child |
Attaches a policy map to a class. | ||
| Step 7 |
exit
Example: Device(config-pmap-c)# exit |
Exits policy-map class configuration mode. | ||
| Step 8 |
exit
Example: Device(config-pmap)# exit |
Exits policy-map configuration mode. | ||
| Step 9 |
policy-map
policy-map-name
Example: Device(config)# policy-map pw-shaper |
Creates a policy map to specify a service policy. | ||
| Step 10 |
class
class-map-name
Example: Device(config-pmap)# class class-default |
Specifies the name of the class map. | ||
| Step 11 |
shape
average
bps
Example: Device(config-pmap-c)# shape average 20000 |
Shapes traffic to the indicated bit rate. | ||
| Step 12 |
exit
Example: Device(config-pmap-c)# exit |
Exits policy-map class configuration mode. | ||
| Step 13 |
exit
Example: Device(config-pmap)# exit |
Exits policy-map configuration mode. | ||
| Step 14 |
policy-map
policy-map-name
Example: Device(config)# policy-map sub-ifc-shaper |
Creates a policy map to specify a service policy. | ||
| Step 15 |
class
class-map-name
Example: Device(config-pmap)# class class-default |
Specifies the name of the class map. | ||
| Step 16 |
shape
average
bps
Example: Device(config-pmap-c)# shape average 40000 |
Shapes traffic to the indicated bit rate. | ||
| Step 17 | exit
Example: Device(config-pmap-c)# exit |
Exits policy-map class configuration mode. | ||
| Step 18 |
exit
Example: Device(config-pmap)# exit |
Exits policy-map configuration mode. | ||
| Step 19 | exit
policy-map
policy-map-name
Example: Device(config)# policy-map port-shaper |
Creates a policy map to specify a service policy. | ||
| Step 20 |
class
class-map-name
Example: Device(config-pmap)# class class-default |
Specifies the name of the class map. | ||
| Step 21 |
shape
average
bps
Example: Device(config-pmap-c)# shape average 60000 |
Shapes traffic to the indicated bit rate. | ||
| Step 22 |
exit
Example: Device(config-pmap-c)# exit |
Exits policy-map class configuration mode. | ||
| Step 23 |
exit
Example: Device(config-pmap)# exit |
Exits policy-map configuration mode. |
Attaching a Policy Map to a VFI Pseudowire
Perform this task to attach a policy map to a VFI Pseudowire.
1.
enable
2.
configure
terminal
3.
policy-map
policy-map-name
4.
class
class-map-name
5.
police
bps
6.
interface
pseudowire
number
7.
encap
mpls
8.
neighbor
peer-address
vcid-value
9.
service-policy
input
policy-map-name
10.
service-policy
output
policy-map-name
11.
interface
gigabit ethernet
number
12.
service-policy
output
policy-map-name
13.
exit
DETAILED STEPS
| Command or Action | Purpose | |||
|---|---|---|---|---|
| Step 1 |
enable
Example: Device> enable |
Enables privileged EXEC mode.
| ||
| Step 2 |
configure
terminal
Example: Device# configure terminal |
Enters global configuration mode. | ||
| Step 3 |
policy-map
policy-map-name
Example: Device# policy-map ingress-police |
Creates a policy map to specify a service policy. | ||
| Step 4 |
class
class-map-name
Example: Device(config-pmap)# class class-default |
Specifies the name of the class map. | ||
| Step 5 |
police
bps
Example: Device(config-pmap-c)# police 10000 |
Creates a per-interface policer and configures the policy-map class to use it. | ||
| Step 6 |
interface
pseudowire
number
Example: Device(config-pmap-c-police)# interface pseudowire 1 |
Configures an interface type and enters interface configuration mode. | ||
| Step 7 |
encap
mpls
Example: Device(config-if)# encap mpls |
Configures MPLS encapsulation. | ||
| Step 8 |
neighbor
peer-address
vcid-value
Example: Device(config-if)# neighbor 10.0.0.1 100 |
Specifies the peer IP address and virtual circuit (VC) ID value of an L2VPN pseudowire. | ||
| Step 9 |
service-policy
input
policy-map-name
Example: Device(config-if)# service-policy input ingress-policy |
Attaches a policy map to an input interface. | ||
| Step 10 |
service-policy
output
policy-map-name
Example: Device(config-if)# service-policy output gold-policy-hqos |
Attaches a policy map to an output interface. | ||
| Step 11 |
interface
gigabit ethernet
number
Example: Device(config-if)# interface gigabit ethernet 1/1/0 |
Configures an interface type. | ||
| Step 12 |
service-policy
output
policy-map-name
Example: Device(config-if)# service-policy output port-shaper |
Attaches a policy map to an output interface. | ||
| Step 13 |
exit
Example: Device(config-if)# exit |
Exits interface configuration mode. |
Configuring VFI with Two Pseudowire Members with Different QoS Policies
Perform this task to configure VFI with two pseudowire members with different QoS policies.
1.
enable
2.
configure
terminal
3.
interface
pseudowire
number
4.
encap
mpls
5.
neighbor
peer-address
vcid value
6.
service-policy
output
policy-map-name
7.
interface
pseudowire
number
8.
encap
mpls
9.
neighbor
peer-address
vcid value
10.
service-policy
output
policy-map-name
11.
l2vpn
vfi
context
name
12.
vpn
id
vpn-id
13.
member
pseudowire
pw-int-number
14.
member
pseudowire
pw-int-number
15.
bridge-domain
bridge-domain-id
16.
member
interface-type-number
17.
interface
BDI
number
18.
ip
vrf
forwarding
vrf-name
19.
ip
address
ip-address
mask
DETAILED STEPS
| Command or Action | Purpose | |||
|---|---|---|---|---|
| Step 1 |
enable
Example: Device> enable |
Enables privileged EXEC mode.
| ||
| Step 2 |
configure
terminal
Example: Device# configure terminal |
Enters global configuration mode. | ||
| Step 3 |
interface
pseudowire
number
Example: Device# interface pseudowire 1 |
Configures an interface type and enters interface configuration mode. | ||
| Step 4 |
encap
mpls
Example: Device(config-if)# encap mpls |
Configures MPLS encapsulation. | ||
| Step 5 |
neighbor
peer-address
vcid value
Example: Device(config-if)# neighbor 10.0.0.1 100 |
Specifies the peer IP address and virtual circuit (VC) ID value of an L2VPN pseudowire. | ||
| Step 6 |
service-policy
output
policy-map-name
Example: Device(config-if)# service-policy output gold-policy |
Attaches a policy map to an output interface. | ||
| Step 7 |
interface
pseudowire
number
Example: Device(config-if)# interface pseudowire 2 |
Configures an interface type. | ||
| Step 8 |
encap
mpls
Example: Device(config-if)# encap mpls |
Configures MPLS encapsulation. | ||
| Step 9 |
neighbor
peer-address
vcid value
Example: Device(config-if)# neighbor 20.0.0.1 100 |
Specifies the peer IP address and VCID of an L2VPN pseudowire. | ||
| Step 10 |
service-policy
output
policy-map-name
Example: Device(config-if)# service-policy output silver-policy |
Attaches a policy map to an output interface. | ||
| Step 11 |
l2vpn
vfi
context
name
Example: Device(config-if)# l2vpn vfi context my-vfi |
Establishes a Layer 2 VPN (L2VPN) virtual forwarding interface (VFI) between two or more separate networks. | ||
| Step 12 |
vpn
id
vpn-id
Example: Device(config-vfi)# vpn id 100 |
Sets a VPN ID on a Virtual Private LAN Services (VPLS) instance. | ||
| Step 13 |
member
pseudowire
pw-int-number
Example: Device(config-vfi)# member pseudowire 1 |
Specifies the devices that form a point-to-point Layer 2 VPN (L2VPN) virtual forwarding interface (VFI) connection. | ||
| Step 14 |
member
pseudowire
pw-int-number
Example: Device(config-vfi)# member pseudowire 2 |
Specifies the devices that form a point-to-point Layer 2 VPN (L2VPN) virtual forwarding interface (VFI) connection. | ||
| Step 15 |
bridge-domain
bridge-domain-id
Example: Device(config-vfi)# bridge-domain 100 |
Configures components on a bridge domain. | ||
| Step 16 |
member
interface-type-number
Example: Device(config-bdomain)# member vfi my-vfi |
Binds a service instance to a bridge domain instance. | ||
| Step 17 |
interface
BDI
number
Example: Device(config-bdomain)# interface BDI 100 |
Configures an interface type and enters interface configuration mode. | ||
| Step 18 |
ip
vrf
forwarding
vrf-name
Example: Device(config-if)# ip vrf forwarding MY-VRF |
Associates a Virtual Private Network (VPN) routing and forwarding (VRF) instance with an interface or subinterface. | ||
| Step 19 |
ip
address
ip-address
mask
Example: Device(config-if)# ip address 30.0.0.1 255.255.255.0 |
Sets a primary or secondary IP address for an interface. |
Configuring VFI with Two Pseudowire Members with the Same QoS Policy
Perform this task to configure VFI with two pseudowire members with the same QoS policy.
1.
enable
2.
configure
terminal
3.
template
type
pseudowire
name
4.
encap
mpls
5.
service-policy
output
policy-map-name
6.
interface
pseudowire
number
7.
encap
mpls
8.
neighbor
peer-address
vcid value
9.
source
template
type
pseudowire
template-name
10.
interface
pseudowire
number
11.
encap
mpls
12.
neighbor
peer-address
vcid value
13.
source
template
type
pseudowire
template-name
14.
l2vpn
vfi
context
name
15.
vpn
id
vpn-id
16.
member
pseudowire
pw-int-number
17.
member
pseudowire
pw-int-number
18.
bridge-domain
bridge-domain-id
19.
member
interface-type-number
20.
interface
BDI
number
21.
ip
vrf
forwarding
vrf-name
22.
ip
address
ip-address
mask
DETAILED STEPS
| Command or Action | Purpose | |||
|---|---|---|---|---|
| Step 1 |
enable
Example: Device> enable |
Enables privileged EXEC mode.
| ||
| Step 2 |
configure
terminal
Example: Device# configure terminal |
Enters global configuration mode. | ||
| Step 3 |
template
type
pseudowire
name
Example: Device(config)# template type pseudowire my_template |
Configures a template. | ||
| Step 4 |
encap
mpls
Example: Device(config-if)# encap mpls |
Configures MPLS encapsulation. | ||
| Step 5 |
service-policy
output
policy-map-name
Example: Device(config-template)# service-policy output common-policy |
Attaches a policy map to a output interface. | ||
| Step 6 |
interface
pseudowire
number
Example: Device(config-if)# interface pseudowire 1 |
Configures an interface type. | ||
| Step 7 |
encap
mpls
Example: Device(config-if)# encap mpls |
Configures MPLS encapsulation. | ||
| Step 8 |
neighbor
peer-address
vcid value
Example: Device(config-if)# neighbor 10.0.0.1 100 |
Specifies the peer IP address and VCID of an L2VPN pseudowire. | ||
| Step 9 |
source
template
type
pseudowire
template-name
Example: Device(config-if)# source template type pseudowire my_template |
Configures the name of a source template of type pseudowire. | ||
| Step 10 |
interface
pseudowire
number
Example: Device(config-if)# interface pseudowire 2 |
Configures an interface type. | ||
| Step 11 |
encap
mpls
Example: Device(config-if)# encap mpls |
Configures MPLS encapsulation. | ||
| Step 12 |
neighbor
peer-address
vcid value
Example: Device(config-if)# neighbor 20.0.0.1 100 |
Specifies the peer IP address and VCID of an L2VPN pseudowire. | ||
| Step 13 |
source
template
type
pseudowire
template-name
Example: Device(config-if)# source template type pseudowire my_template |
Configures the name of a source template of type pseudowire. | ||
| Step 14 |
l2vpn
vfi
context
name
Example: Device(config-if)# l2vpn vfi context my-vfi |
Establishes a Layer 2 VPN (L2VPN) virtual forwarding interface (VFI) between two or more separate networks. | ||
| Step 15 |
vpn
id
vpn-id
Example: Device(config-vfi)# vpn id 100 |
Sets a VPN ID on a Virtual Private LAN Services (VPLS) instance. | ||
| Step 16 |
member
pseudowire
pw-int-number
Example: Device(config-vfi)# member pseudowire 1 |
Specifies the devices that form a point-to-point Layer 2 VPN (L2VPN) virtual forwarding interface (VFI) connection. | ||
| Step 17 |
member
pseudowire
pw-int-number
Example: Device(config-vfi)# member pseudowire 2 |
Specifies the devices that form a point-to-point Layer 2 VPN (L2VPN) virtual forwarding interface (VFI) connection. | ||
| Step 18 |
bridge-domain
bridge-domain-id
Example: Device(config-vfi)# bridge-domain 100 |
Configures components on a bridge domain. | ||
| Step 19 |
member
interface-type-number
Example: Device(config-bdomain)# member vfi my-vfi |
Binds a service instance to a bridge domain instance. | ||
| Step 20 |
interface
BDI
number
Example: Device(config-bdomain)# interface BDI 100 |
Configures an interface type and enters interface configuration mode. | ||
| Step 21 |
ip
vrf
forwarding
vrf-name
Example: Device(config-if)# ip vrf forwarding MY-VRF |
Associates a Virtual Private Network (VPN) routing and forwarding (VRF) instance with an interface or subinterface. | ||
| Step 22 |
ip
address
ip-address
mask
Example: Device(config-if)# ip address 30.0.0.1 255.255.255.0 |
Sets a primary or secondary IP address for an interface. |
Configuring VFI with Auto Discovered Pseudowires
Perform this task to configure VFI with auto discovered pseudowires.
1.
enable
2.
configure
terminal
3.
template
type
pseudowire
name
4.
encap
mpls
5.
service-policy
output
policy-map-name
6.
l2vpn
vfi
context
name
7.
vpn
id
vpn-id
8.
autodiscovery
bgp
signaling
ldp
template
template-name
9.
bridge-domain
bridge-domain-id
10.
member
interface-type-number
11.
interface
BDI
number
12.
ip
vrf
forwarding
vrf-name
13.
ip
address
ip-address
mask
DETAILED STEPS
| Command or Action | Purpose | |||
|---|---|---|---|---|
| Step 1 |
enable
Example: Device> enable |
Enables privileged EXEC mode.
| ||
| Step 2 |
configure
terminal
Example: Device# configure terminal |
Enters global configuration mode. | ||
| Step 3 |
template
type
pseudowire
name
Example: Device(config)# template type pseudowire my_template |
Configures a template. | ||
| Step 4 |
encap
mpls
Example: Device(config-if)# encap mpls |
Configures MPLS encapsulation. | ||
| Step 5 |
service-policy
output
policy-map-name
Example: Device(config-template)# service-policy output common-policy |
Attaches a policy map to a output interface. | ||
| Step 6 |
l2vpn
vfi
context
name
Example: Device(config-if)# l2vpn vfi context my-vfi |
Establishes a Layer 2 VPN (L2VPN) virtual forwarding interface (VFI) between two or more separate networks. | ||
| Step 7 |
vpn
id
vpn-id
Example: Device(config-vfi)# vpn id 100 |
Sets a VPN ID on a Virtual Private LAN Services (VPLS) instance. | ||
| Step 8 |
autodiscovery
bgp
signaling
ldp
template
template-name
Example: Device(config-vfi)# autodiscovery bgp signaling ldp template my_template |
Designates a Layer 2 virtual forwarding interface (VFI) as having Label Distribution Protocol (LDP) autodiscovered pseudowire members. | ||
| Step 9 |
bridge-domain
bridge-domain-id
Example: Device(config-vfi)# bridge-domain 100 |
Configures components on a bridge domain. | ||
| Step 10 |
member
interface-type-number
Example: Device(config-bdomain)# member vfi my-vfi |
Binds a service instance to a bridge domain instance. | ||
| Step 11 |
interface
BDI
number
Example: Device(config-bdomain)# interface BDI 100 |
Configures an interface type and enters interface configuration mode. | ||
| Step 12 |
ip
vrf
forwarding
vrf-name
Example: Device(config-if)# ip vrf forwarding MY-VRF |
Associates a Virtual Private Network (VPN) routing and forwarding (VRF) instance with an interface or subinterface. | ||
| Step 13 |
ip
address
ip-address
mask
Example: Device(config-if)# ip address 30.0.0.1 255.255.255.0 |
Sets a primary or secondary IP address for an interface. |
Configuration Examples for QoS Policies for VFI Pseudowires
Example: Configuring QoS Policies for Pseudowires
The following example shows how to QoS policies for pseudowires:
Device(config)# policy-map GOLD-POLICY-CHILD Device(config-pmap)# class PRIORITY-CLASS Device(config-pmap-c)# priority 100 Device(config-pmap-c)# exit Device(config-pmap)# class GUARANTEE-CLASS Device(config-pmap-c)# bandwidth 1000 Device(config-pmap-c)# exit Device(config-pmap)# class LIMITED-CLASS Device(config-pmap-c)# police cir 8000 Device(config-pmap-c-police)# class class-default Device(config-pmap-c)# shape average 8000 Device(config-pmap-c)# queue-limit 150 Device(config-pmap-c)# random-detect Device(config-pmap-c)# exit Device(config-pmap)# exit Device(config)# policy-map GOLD-POLICY-HQOS Device(config-pmap)# class class-default Device(config-pmap-c)# shape average 8000 Device(config-pmap-c)# service-policy GOLD-POLICY-CHILD Device(config-pmap-c)# exit Device(config-pmap)# exit Device(config)# policy-map PW-SHAPER Device(config-pmap)# class class-default Device(config-pmap-c)# shape average 8000 Device(config-pmap-c)# exit Device(config-pmap)# exit Device(config)# policy-map SUB-IFC-SHAPER Device(config-pmap)# class class-default Device(config-pmap-c)# shape average 10000 Device(config-pmap-c)# exit Device(config-pmap)# exit Device(config)# policy-map PORT-SHAPER Device(config-pmap)# class class-default Device(config-pmap-c)# shape average 20000 Device(config-pmap-c)# exit Device(config-pmap)# exit Device(config)# policy-map INGRESS-POLICE Device(config-pmap)# class class-default Device(config-pmap-c)# police 10000 Device(config-pmap-c-police)# interface pseudowire 1 Line protocol on Interface pseudowire0, changed state to up Device(config-if)# encap mpls Device(config-if)# neighbor 10.0.0.1 100 Device(config-if)# service-policy input INGRESS-POLICY Device(config-if)# service-policy output GOLD-POLICY-HQOS Device(config-if)# interface GigabitEthernet 1/1/0 --- Pseudowire is going out through this interface Device(config-if)# service-policy output PORT-SHAPER
Example: Configuring VFI with Two Pseudowire Members with Different QoS Policies
The following example shows how to configure VFI with two pseudowire members with different QoS policies:
Device(config)# interface pseudowire1 Line protocol on Interface pseudowire0, changed state to up Device(config-if)# encap mpls Device(config-if)# neighbor 10.0.0.1 100 Device(config-if)# service-policy output GOLD-POLICY Device(config-if)# interface pseudowire2 Device(config-if)# encap mpls Device(config-if)# neighbor 20.0.0.1 100 Device(config-if)# service-policy output SILVER-POLICY Device(config-if)# l2vpn vfi context MY-VFI Device(config-vfi)# vpn id 100 Device(config-vfi)# member pseudowire1 Device(config-vfi)# member pseudowire2 Device(config-vfi)# bridge-domain 100 Device(config-bdomain)# member vfi MY-VFI STATUS_CHANGED: Status of VFI my-vfi changed from DOWN to UP Device(config-bdomain)# interface BDI 100 Device(config-if)# ip vrf forwarding MY-VRF Device(config-if)# ip address 30.0.0.1 255.255.255.0
Example: Configuring VFI with Two Pseudowire Members with the Same QoS Policy
The following example shows how to configure VFI with two pseudowire members with the same QoS policy:
Device(config)# template type pseudowire MY_TEMPLATE Device(config-template)# encapsulation mpls Device(config-template)# service-policy output COMMON-POLICY Device(config-template)# interface pseudowire1 Line protocol on Interface pseudowire0, changed state to up Device(config-if)# encap mpls Device(config-if)# neighbor 10.0.0.1 100 Device(config-if)# source template type pseudowire MY_TEMPLATE Device(config-if)# interface pseudowire2 Device(config-if)# encap mpls Device(config-if)# neighbor 20.0.0.1 100 Device(config-if)# source template type pseudowire MY_TEMPLATE Device(config-if)# l2vpn vfi context MY-VFI Device(config-vfi)# vpn id 100 Device(config-vfi)# member pseudowire1 Device(config-vfi)# member pseudowire2 Device(config-vfi)# bridge-domain 100 Device(config-bdomain)# member vfi MY-VFI Status of VFI my-vfi changed from DOWN to UP Device(config-bdomain)# interface BDI 100 Device(config-if)# ip vrf forwarding MY-VRF Device(config-if)# ip address 30.0.0.1 255.255.255.0
Example: Configuring VFI with Auto Discovered Pseudowires
The following example shows how to configure VFI with auto discovered pseudowires:
Device(config)# template type pseudowire MY_TEMPLATE Device(config-template)# encapsulation mpls Device(config-template)# service-policy output COMMON-POLICY Device(config-template)# l2vpn vfi context MY-VFI Device(config-vfi)# vpn id 100 Line protocol on Interface pseudowire0, changed state to up Device(config-vfi)# autodiscovery bgp signaling ldp template MY_TEMPLATE Device(config-vfi-autodiscovery)# bridge-domain 100 Device(config-bdomain)# member vfi MY-VFI Status of VFI my-vfi changed from DOWN to UP Device(config-bdomain)# interface BDI 100 Device(config-if)# ip vrf forwarding MY-VRF Device(config-if)# ip address 30.0.0.1 255.255.255.0
Example: Displaying Pseudowire Policy Map Information
The following is sample output from the show policy-map interface command which shows class maps and policy maps configured for the pseudowire 2 interface:
Device#show policy-map interface pseudowire2
pseudowire2
Service-policy output: pw_brr
Class-map: prec1 (match-all)
0 packets, 0 bytes
30 second offered rate 0000 bps, drop rate 0000 bps
Match: ip precedence 1
Queueing
queue limit 4166 packets
(queue depth/total drops/no-buffer drops) 0/0/0
(pkts output/bytes output) 0/0
bandwidth remaining ratio 1
Class-map: prec2 (match-all)
0 packets, 0 bytes
30 second offered rate 0000 bps, drop rate 0000 bps
Match: ip precedence 2
Queueing
queue limit 4166 packets
(queue depth/total drops/no-buffer drops) 0/0/0
(pkts output/bytes output) 0/0
bandwidth remaining ratio 2
Class-map: prec3 (match-all)
0 packets, 0 bytes
30 second offered rate 0000 bps, drop rate 0000 bps
Match: ip precedence 3
Queueing
queue limit 4166 packets
(queue depth/total drops/no-buffer drops) 0/0/0
(pkts output/bytes output) 0/0
bandwidth remaining ratio 3
Class-map: class-default (match-any)
0 packets, 0 bytes
30 second offered rate 0000 bps, drop rate 0000 bps
Match: any
Queueing
queue limit 4166 packets
(queue depth/total drops/no-buffer drops) 0/0/0
(pkts output/bytes output) 0/0
bandwidth remaining ratio 4
Device#
Additional References for QoS Policies for VFI Pseudowires
Related Documents
Related Topic |
Document Title |
|---|---|
|
Cisco IOS commands |
|
|
MPLS commands |
Cisco IOS Multiprotocol Label Switching Command Reference |
|
QoS commands |
Cisco IOS Quality of Service Solutions Command Reference |
|
Configuring the pseudowire class |
“Any Transport over MPLS” |
|
Layer 2 VPN |
|
|
L2VPN pseudowires |
Technical Assistance
Description |
Link |
|---|---|
|
The Cisco Support and Documentation website provides online resources to download documentation, software, and tools. Use these resources to install and configure the software and to troubleshoot and resolve technical issues with Cisco products and technologies. Access to most tools on the Cisco Support and Documentation website requires a Cisco.com user ID and password. |
Feature Information For QoS Policies for VFI Pseudowires
The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Feature Name |
Releases |
Feature Information |
|---|---|---|
|
QoS Policies for VFI Pseudowires |
Cisco IOS XE 3.8S |
This features allows you to configure QoS classes and policies for use on VFI pseudowire members. The following commands were introduced or modified: show policy-map interface. |