sample (event trigger) through snmp mib event sample

show snmp chassis

To display the Simple Network Management Protocol (SNMP) server serial number, use the show snmp chassis command in privileged EXEC mode.

show snmp chassis

Syntax Description

This command has no arguments or keywords.

Command Default

The system serial number will be displayed.

Command Modes


Privileged EXEC (#)

Command History

Release

Modification

12.4(12)T

This command was introduced.

12.2(31)SB

This command was integrated into Cisco IOS Release 12.2(31)SB2.

12.2SX

This command was integrated into Cisco IOS Release 12.2SX.

Cisco IOS XE Release 3.2SE

This command was implemented in Cisco IOS XE Release 3.2SE.

Cisco IOS XE Release 3.3SE

This command was implemented in Cisco IOS XE Release 3.3SE.

Usage Guidelines

To configure a message line identifying the SNMP server chassis ID, use the snmp-server chassis-id command.

Examples

The following is sample output from the show snmp chassiscommand. The output is self-explanatory. 

Router# show snmp chassis
01506199

Related Commands

Command

Description

show snmp

Displays SNMP communication details.

snmp-server chassis-id

Configures a message line identifying the SNMP server serial number.

show snmp community

To display Simple Network Management Protocol (SNMP) community access strings, use the show snmp communitycommand in privileged EXEC mode.

show snmp community

Syntax Description

This command has no arguments or keywords.

Command Default

All community access strings configured to enable access to SNMP entities are displayed.

Command Modes


Privileged EXEC (#)

Command History

Release

Modification

12.4(12)T

This command was introduced.

12.2(31)SB

This command was integrated into Cisco IOS Release 12.2(31)SB2.

12.2SX

This command was integrated into Cisco IOS Release 12.2SX.

Cisco IOS XE Release 3.2SE

This command was implemented in Cisco IOS XE Release 3.2SE.

Cisco IOS XE Release 3.3SE

This command was implemented in Cisco IOS XE Release 3.3SE.

Usage Guidelines

Community string consists of 1 to 32 alphanumeric characters and functions like a password enabling access to the SNMP entities.

To set up the community access string to permit access to the SNMP, use the snmp-server communitycommand.

Examples

The following is sample output from the show snmp community command. The output displays the community access strings configured for enabling access to an SNMP entity. 

Router# show snmp community
Community name: ILMI
Community Index: ILMI
Community SecurityName: ILMI
storage-type: read-only  active
Community name: private
Community Index: private
Community SecurityName: private
storage-type: nonvolatile        active
Community name: private@1
Community Index: private@1
Community SecurityName: private
storage-type: read-only  active
Community name: public
Community Index: public
Community SecurityName: public
storage-type: nonvolatile        active

The table below describes the significant fields shown in the display.

Table 1 show snmp community Field Descriptions

Field

Description

Community name

Displays the community name.

Community Index

Displays the community index.

Community SecurityName

Displays the security name of the community string.

storage-type

Displays the access type stored for the community string.

Related Commands

Command

Description

snmp-server community

Sets up the community string to permit access to SNMP entities.

show snmp contact

To display Simple Network Management Protocol (SNMP) system contact information, use the show snmp contactcommand in privileged EXEC mode.

show snmp contact

Syntax Description

This command has no arguments or keywords.

Command Default

The SNMP system contact information is displayed.

Command Modes


Privileged EXEC (#)

Command History

Release

Modification

12.4(12)T

This command was introduced.

12.2(31)SB

This command was integrated into Cisco IOS Release 12.2(31)SB2.

12.2SX

This command was integrated into Cisco IOS Release 12.2SX.

Cisco IOS XE Release 3.2SE

This command was implemented in Cisco IOS XE Release 3.2SE.

Cisco IOS XE Release 3.3SE

This command was implemented in Cisco IOS XE Release 3.3SE.

Usage Guidelines

To set the system contact information, use the snmp-server contactcommand.

Examples

The following is sample output from the show snmp contact command. The output is self-explanatory. 

Router# show snmp contact
snmp-server contact '{"phone": "123-456-7899", "name": "Bob"}'

Related Commands

Command

Description

snmp-server contact

Sets the system contact information.

show snmp engineID

To display the identification of the local Simple Network Management Protocol (SNMP) engine and all remote engines that have been configured on the router, use the show snmp engineID command in EXEC mode.

show snmp engineID

Syntax Description

This command has no arguments or keywords.

Command Modes


EXEC

Command History

Release

Modification

12.0(3)T

This command was introduced.

12.2(33)SRA

This command was integrated into Cisco IOS Release 12.2(33)SRA.

12.2SX

This command is supported in the Cisco IOS Release 12.2SX train. Support in a specific 12.2SX release of this train depends on your feature set, platform, and platform hardware.

Cisco IOS XE Release 3.2SE

This command was implemented in Cisco IOS XE Release 3.2SE.

Cisco IOS XE Release 3.3SE

This command was implemented in Cisco IOS XE Release 3.3SE.

Usage Guidelines

An SNMP engine is a copy of SNMP that can reside on a local or remote device.

Examples

The following example specifies 00000009020000000C025808 as the local engineID and 123456789ABCDEF000000000 as the remote engine ID, 172.16.37.61 as the IP address of the remote engine (copy of SNMP) and 162 as the port from which the remote device is connected to the local device: 

Router# show snmp engineID
Local SNMP engineID: 00000009020000000C025808
Remote Engine ID           IP-addr          Port
123456789ABCDEF000000000   172.16.37.61     162

The table below describes the fields shown in the display.

Table 2 show snmp engineID Field Descriptions

Field

Definition

Local SNMP engine ID

A string that identifies the copy of SNMP on the local device.

Remote Engine ID

A string that identifies the copy of SNMP on the remote device.

IP-addr

The IP address of the remote device.

Port

The port number on the local device to which the remote device is connected.

Related Commands

Command

Description

snmp-server engineID local

Configures a name for either the local or remote SNMP engine on the router.

show snmp group

To display the names of configured SNMP groups, the security model being used, the status of the different views, and the storage type of each group, use the show snmp group command in privileged EXEC mode.

show snmp group

Syntax Description

This command has no arguments or keywords.

Command Modes


Privileged EXEC

Command History

Release

Modification

12.0(3)T

This command was introduced.

12.2(33)SRA

This command was integrated into Cisco IOS Release 12.2(33)SRA.

12.2SX

This command is supported in the Cisco IOS Release 12.2SX train. Support in a specific 12.2SX release of this train depends on your feature set, platform, and platform hardware.

Cisco IOS XE Release 3.2SE

This command was implemented in Cisco IOS XE Release 3.2SE.

Cisco IOS XE Release 3.3SE

This command was implemented in Cisco IOS XE Release 3.3SE.

Usage Guidelines

SNMP groups are configured using the snmp-server group command.

SNMP groups and users are used in the context of the View-based Access Control Model (VACM) for SNMP (for further information, see the “VACM for SNMP” IETF internet draft document).

Examples

The following example specifies the group name as public, the security model as v1, the read view name as v1default, the notify view name as *tv.FFFFFFFF, and the storage type as volatile: 

Router# show snmp group
groupname: V1                               security model:v1 
readview : v1default                        writeview: <no writeview specified> 
notifyview: <no notifyview specified>       
row status: active
groupname: ILMI                             security model:v1 
readview : *ilmi                            writeview: *ilmi                    
notifyview: <no notifyview specified>       
row status: active
groupname: ILMI                             security model:v2c 
readview : *ilmi                            writeview: *ilmi                    
notifyview: <no notifyview specified>       
row status: active
groupname: group1                           security model:v1 
readview : v1default                        writeview: <no writeview specified> 
notifyview: <no notifyview specified>       
row status: active

The table below describes the fields shown in the example.

Table 3 show snmp group Field Descriptions

Field

Definition

groupname

The name of the SNMP group, or collection of users that have a common access policy.

security model

The security model used by the group, either v1, v2c, or v3.

readview

A string identifying the read view of the group.

  • For further information on the SNMP views, use the show snmp view command.

writeview

A string identifying the write view of the group.

notifyview

A string identifying the notify view of the group.

The notify view indicates the group for SNMP notifications, and corresponds to the setting of the snmp-server group group-name version notify notify-view command.

Related Commands

Command

Description

snmp-server group

Configures a new SNMP group or a table that maps SNMP users to SNMP views.

show snmp user

Displays the configured characteristics for SNMP users.

show snmp view

Displays a list of configured SNMP views.

show snmp host

To display the recipient details for Simple Network Management Protocol (SNMP) notification operations, use the show snmp hostcommand in privileged EXEC mode.

show snmp host

Syntax Description

This command has no arguments or keywords.

Command Default

The information configured for SNMP notification operation is displayed.

Command Modes


Privileged EXEC (#)

Command History

Release

Modification

12.4(12)T

This command was introduced.

12.2(31)SB

This command was integrated into Cisco IOS Release 12.2(31)SB2.

12.2SX

This command was integrated into Cisco IOS Release 12.2SX.

Cisco IOS XE Release 3.2SE

This command was implemented in Cisco IOS XE Release 3.2SE.

Cisco IOS XE Release 3.3SE

This command was implemented in Cisco IOS XE Release 3.3SE.

Usage Guidelines

The show snmp host command displays details such as IP address of the Network Management System (NMS), notification type, SNMP version, and the port number of the NMS.

To configure these details, use the snmp-server hostcommand.

Examples

The following is sample output from the show snmp hostcommand. 

Router# show snmp host
Notification host: 10.2.28.6 udp-port: 162   type: inform
user: public    security model: v2c
traps: 00001000.00000000.00000000

The table below describes the significant fields shown in the display.

Table 4 show snmp host Field Descriptions

Field

Description

Notification host

Displays the IP address of the host for which the notification is generated.

udp-port

Displays the port number.

type

Displays the type of notification.

user

Displays the access type of the user for which the notification is generated.

security model

Displays the SNMP version used to send notifications.

traps

Displays details of the notification generated.

Related Commands

Command

Description

snmp-server host

Configures the recipient details for SNMP notification operations.

show snmp location

To display the Simple Network Management Protocol (SNMP) system location string, use the show snmp locationcommand in privileged EXEC mode.

show snmp location

Syntax Description

This command has no arguments or keywords.

Command Default

The SNMP system location information is displayed.

Command Modes


Privileged EXEC (#)

Command History

Release

Modification

12.4(12)T

This command was introduced.

12.2(31)SB

This command was integrated into Cisco IOS Release 12.2(31)SB2.

12.2SX

This command was integrated into Cisco IOS Release 12.2SX.

Cisco IOS XE Release 3.2SE

This command was implemented in Cisco IOS XE Release 3.2SE.

Cisco IOS XE Release 3.3SE

This command was implemented in Cisco IOS XE Release 3.3SE.

Usage Guidelines

To configure system location details, use the snmp-server locationcommand.

Examples

The following is sample output from the show snmp locationcommand. The output is self-explanatory. 

Router# show snmp location
building 3/Room 214

Related Commands

Command

Description

snmp-server location

Configures SNMP system location details.

show snmp user

To display information about the configured characteristics of Simple Network Management Protocol (SNMP) users, use the show snmp user command in privileged EXEC mode.

show snmp user [username]

Syntax Description

username

(Optional) Name of a specific user or users about which to display SNMP information.

Command Modes


Privileged EXEC (#)

Command History

Release

Modification

12.0(3)T

This command was introduced.

12.3(2)T

The username argument was added. The output for this command was enhanced to show the authentication protocol (MD5 or SHA) and group name.

12.2(33)SRA

This command was integrated into Cisco IOS Release 12.2(33)SRA.

12.2(33)SRB

This command was integrated into Cisco IOS Release 12.2(33)SRB.

12.2SX

This command is supported in the Cisco IOS Release 12.2SX train. Support in a specific 12.2SX release of this train depends on your feature set, platform, and platform hardware.

12.2(33)SB

This command was integrated into Cisco IOS Release 12.2(33)SB.

Cisco IOS XE Release 3.2SE

This command was implemented in Cisco IOS XE Release 3.2SE.

Cisco IOS XE Release 3.3SE

This command was implemented in Cisco IOS XE Release 3.3SE.

Usage Guidelines

An SNMP user must be part of an SNMP group, as configured using the snmp-server user username group-name command.

When the usernameargument is not entered, the show snmp usercommand displays information about all configured users. If you specify the usernameargument, if one or more users of that name exists, the information pertaining to those users is displayed. Because this command displays users configured with the SNMP engine ID of the local agent and other engine IDs, there can be multiple users with the same username.

When configuring SNMP, you may see the logging message “Configuring snmpv3 USM user.” USM stands for the User-based Security Model for version 3 of the Simple Network Management Protocol (SNMPv3). For further information on the USM, see RFC 2574.

Examples

The following is sample output from the show snmp user command. The output indicates the username as authuser, the engine ID string as 00000009020000000C025808, and the storage type as nonvolatile: 

Router# show snmp user
 authuser
User name: authuser 
Engine ID: 00000009020000000C025808 
storage-type: nonvolatile       active access-list: 10
Rowstatus: active 
Authentication Protocol: MD5
Privacy protocol: DES 
Group name: VacmGroupName

The table below describes the significant fields shown in the display.

Table 5 show snmp user Field Descriptions

Field

Description

User name

A string identifying the name of the SNMP user.

Engine ID

A string identifying the name of the copy of SNMP on the device.

storage-type

Indicates whether the settings have been set in volatile or temporary memory on the device, or in nonvolatile or persistent memory where settings will remain after the device has been turned off and on again.

active access-list

Standard IP access list associated with the SNMP user.

Rowstatus

Indicates whether Rowstatus is active or inactive.

Authentication Protocol

Identifies which authentication protocol is used. Options are message digest algorithm 5 (MD5), Secure Hash Algorithm (SHA) packet authentication, or None.

  • If authentication is not supported in your software image, this field will not be displayed.

Privacy protocol

Indicates whether Data Encryption Standard (DES) packet encryption is enabled.

  • If DES is not supported in your software image, this field will not be displayed.

Group name

Indicates the SNMP group the user is a part of.

  • SNMP groups are defined in the context of a View-based Access Control Model (VACM).

show snmp view

To display the family name, storage type, and status of a Simple Network Management Protocol (SNMP) configuration and associated MIB, use the show snmp viewcommand in privileged EXEC mode.

show snmp view

Syntax Description

This command has no arguments or keywords.

Command Modes


Privileged EXEC

Command History

Release

Modification

12.4(2)T

This command was introduced.

12.0(31)S

This command was integrated into Cisco IOS Release 12.0(31)S.

Cisco IOS XE Release 3.2SE

This command was implemented in Cisco IOS XE Release 3.2SE.

Cisco IOS XE Release 3.3SE

This command was implemented in Cisco IOS XE Release 3.3SE.

Usage Guidelines

Use this command to display the SNMP view configuration.

Examples

The following is sample output from the show snmp viewcommand. 

Router# show snmp view
View Family Name/View Family Subtree/View Family Mask/View Family Type/storage/status
myview               mib-2                 -          included         nonvolatile active
myview               cisco                 -          included         nonvolatile active
myview               atEntry               -          excluded         nonvolatile active
v1default            iso                   -          included         permanent   active
v1default            internet              -          included         volatile    active
v1default            internet.6.3.15       -          excluded         volatile    active
v1default            internet.6.3.16       -          excluded         volatile    active
v1default            internet.6.3.18       -          excluded         volatile    active

The table below describes the significant fields shown in the display.

Table 6 show snmp view Field Descriptions

Field

Description

View Family Name

Family name.

View Family Subtree

MIB name.

View Family Mask

Family mask. A hyphen (-) appears in this column when no mask is associated.

View Family Type

Type of family, either included or excluded.

storage

Type of memory storage, for example, volatile.

status

Status of the configuration, either active or nonactive.