Memory Pool—SNMP Notification Support

This feature adds Cisco command line interface commands to enable Simple Network Management Protocol (SNMP) notifications for the Cisco Enhanced Memory Pool MIB (CISCO-ENHANCED-MEMPOOL-MIB).

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest caveats and feature information, see Bug Search Tool and the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the feature information table.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to https://cfnng.cisco.com/. An account on Cisco.com is not required.

Prerequisites for Memory Pool—SNMP Notification Support

Before you can compile CISCO-ENHANCED-MEMPOOL-MIB, you need to compile the following MIBs in the order listed:

  1. SNMPv2-SM (SNMP configuration MIB)

  2. SNMPv2-TC (SNMP configuration MIB)

  3. SNMPv2-CONF (SNMP configuration MIB)

  4. SNMP-FRAMEWORK-MIB (SNMP configuration MIB)

  5. CISCO-SMI (SNMP configuration MIB)

  6. ENTITY-MIB (core MIB)

  7. CISCO-ENHANCED-MEMPOOL-MIB (infrastructure MIB)

All MIBs used on Cisco devices are available at http://www.cisco.com/go/mibs.

Restrictions for Memory Pool—SNMP Notification Support

Access to the MIB is restricted to a read-only level.

Information About Memory Pool—SNMP Notification Support

The CISCO-ENHANCED-MEMPOOL-MIB module describes SNMP objects that enable users to remotely monitor the memory pool statistics of all physical entities, such as line cards and route processors, in a managed device. This is particularly useful for high-end devices that may have a large number of line cards. Lately, the MIB has been enhanced to provide buffer pool and buffer cache statistics.

In addition to the statistics provided by the MIB, SNMP notifications (traps or informs) can be configured to be sent when the maximum number of memory buffers changes (in other words, when a new buffer peak is reached).

How to Enable Memory Pool—SNMP Notification Support

SUMMARY STEPS

  1. enable
  2. configure terminal
  3. snmp-server enable traps memory [bufferpeak ]
  4. snmp-server host {hostname | ip-address } [traps | informs ] [version {1 | 2c | 3 [auth | noauth | priv ]}] community-string [udp-port port ] [notification-type ] [vrf vrf-name ]
  5. exit

DETAILED STEPS

  Command or Action Purpose
Step 1

enable

Example:


Device> enable

Enables privileged EXEC mode.

  • Enter your password if prompted.

Step 2

configure terminal

Example:


Device# configure terminal

Enters global configuration mode.

Step 3

snmp-server enable traps memory [bufferpeak ]

Example:


Device(config)# snmp-server enable traps memory bufferpeak

Enables only buffer peak notifications (traps or informs) in the CISCO-ENHANCED-MEMPOOL-MIB.

Step 4

snmp-server host {hostname | ip-address } [traps | informs ] [version {1 | 2c | 3 [auth | noauth | priv ]}] community-string [udp-port port ] [notification-type ] [vrf vrf-name ]

Example:


Device(config)# snmp-server host NMS-host1.example.com community1 memory

Enables buffer peak notifications to be sent to the specified host.

Step 5

exit

Example:

Device(config)# exit

Exits global configuration mode and returns to privileged EXEC mode.

Configuration Examples for Memory Pool—SNMP Notification Support

Enabling Memory Pool—SNMP Notification Support Example

In the following example, all available memory-related SNMP notifications are enabled and configured to be sent as informs to the host myhost.cisco.com using the community string public: 


Device(config)# snmp-server enable traps memory bufferpeak
 
Device(config)# snmp-server host myhost.cisco.com informs version 3 public memory

Note that as of this release, only the buffer peak memory notification type is available. Additional memory notification type keywords may be added in future releases.

Additional References

Related Documents

Related Topic

Document Title

Cisco IOS commands

Cisco IOS Master Commands List, All Releases

Cisco IOS SNMP Support Command Reference

Cisco IOS SNMP Support Command Reference

Standards and RFCs

Standard/RFC Title

CBC-DES (DES-56) standard

Symmetric Encryption Protocol

Standard 58

Structure of Management Information Version 2 (SMIv2) >

RFC 1067

A Simple Network Management Protocol

RFC 1091

Telnet terminal-type option

RFC 1098

Simple Network Management Protocol (SNMP)

RFC 1157

Simple Network Management Protocol (SNMP)

RFC 1213

Management Information Base for Network Management of TCP/IP-based internets:MIB-II

RFC 1215

Convention for defining traps for use with the SNMP

RFC 1901

Introduction to Community-based SNMPv2

RFC 1905

Common Management Information Services and Protocol over TCP/IP (CMOT)

RFC 1906

Telnet X Display Location Option

RFC 1908

Simple Network Management Protocol (SNMP)

RFC 2104

HMAC: Keyed-Hashing for Message Authentication

RFC 2206

RSVP Management Information Base using SMIv2

RFC 2213

Integrated Services Management Information Base using SMIv2

RFC 2214

Integrated Services Management Information Base Guaranteed Service Extensions using SMIv2

RFC 2233

The Interface Group MIB using SMIv2

RFC 2271

An Architecture for Describing SNMP Management Frameworks

RFC 2570

Introduction to Version 3 of the Internet-standard Network Management Framework

RFC 2578

Structure of Management Information Version 2 (SMIv2)

RFC 2579

Textual Conventions for SMIv2

RFC 2580

Conformance Statements for SMIv2

RFC 2981

Event MIB

RFC 3413

SNMPv3 Applications

RFC 3415

View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP)

MIBs

MIB

MIBs Link

  • Cisco SNMPv2
  • Ethernet-like Interfaces MIB
  • Event MIB
  • Expression MIB Support for Delta, Wildcarding, and Aggregation
  • Interfaces Group MIB (IF-MIB)
  • Interfaces Group MIB Enhancements
  • MIB Enhancements for Universal Gateways and Access Servers

To locate and download MIBs for selected platforms, Cisco IOS XE software releases, and feature sets, use Cisco MIB Locator found at the following URL:

http://www.cisco.com/go/mibs

Technical Assistance

Description

Link

The Cisco Support website provides extensive online resources, including documentation and tools for troubleshooting and resolving technical issues with Cisco products and technologies.

To receive security and technical information about your products, you can subscribe to various services, such as the Product Alert Tool (accessed from Field Notices), the Cisco Technical Services Newsletter, and Really Simple Syndication (RSS) Feeds.

Access to most tools on the Cisco Support website requires a Cisco.com user ID and password.

http://www.cisco.com/cisco/web/support/index.html

Feature Information for Memory Pool—SNMP Notification Support

The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Table 1. Feature Information for Memory Pool—SNMP Notification Support

Feature Name

Releases

Feature Information

Memory Pool—SNMP Notification Support

12.3(4)T 12.2(22)S 12.2(33)SRA 12.2(33)SXH

This feature adds CLI commands to enable SNMP notifications for the Cisco Enhanced Memory Pool MIB (CISCO-ENHANCED-MEMPOOL-MIB).