IP Addresses and Services Configuration Guide for Cisco NCS 5500 Series Routers, IOS XR Release 7.8.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: November 30, 2022

Chapter: New and Changed IP Addresses and Services Features

New and Changed IP Addresses and Services Features
IP Addresses and Services Features Added or Modified in IOS XR Release 7.8.x

New and Changed IP Addresses and Services Features

This table summarizes the new and changed feature information for the IP Addresses and Services Configuration Guide for Cisco NCS 5500 Series Routers, and tells you where they are documented.

IP Addresses and Services Features Added or Modified in IOS XR Release 7.8.x

This section describes the new and changed IP addresses features for Cisco IOS XR.

IP Addresses Features Added or Modified in IOS XR Release 7.8.x

Table 1. New and Changed Features
Feature	Description	Changed in Release	Where Documented
Support for HSRP V2 Extended Group Range	This feature supports HSRPv2 group IDs up to 4095 with 255 number of IPv4 or IPv6 sessions. Earlier, you could configure up to 255 group IDs with IPv4 and IPv6 combined.	None	None

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)