March 2007

Added the Revision History table.

April 2007

Added description for service state transitions in ED-<OCN_TYPE>, ED-EC1, ED-T1, and ED-T3 commands in the "ED Commands" chapter.

May 2007

Added a note regarding Telecordia GR831 non-compliant data and TL1 response in the "RTRV Commands" chapter.

August 2007

Updated the Preface chapter.

September 2007

Updated the ED-FTPSERVER input format, input example, and input parameter in the "ED Commands" chapter with the TIMER parameter.

December 2007

Updated a note in the Section 18.2 RLS-LPBK-<MOD2> in Chapter 18, RLS Commands, and added <SUPPORT> parameter for ED-GIGE, ED-ETH, and ED-POS commands.

March 2008

Updated the description for the "<PPMTYPE>, <PPMNUM>, and <PORTNUM>" parameters in the Input Parameter table of the "CHG-EQPT" command in Chapter 5.

April 2008

•Changed the minute range for REPTINVL from 1-1440 min to 5-1440 min for SCHED-PMREPT command in the SCHED Commands chapter.

•Replaced PACKAGE_PATH with CONFIG_FILE_PATH in the COPY-IOSCFG section.

•Added description in the FTPSERVER sections of the ED, ENT, DLT, and RTRV commands.

•Added a note to the Usage Guidelines for the ED-FAC command.

•Updated aidtype, cardmode, and equipment type in ED-EQPT, ENT-EQPT, and RTRV-EQPT commands in Chapter 11, ED Commands, Chapter 12, ENT Commands, and Chapter 21, RTRV Commands.

•Updated parameters in ED-GFP and ED-NE-GEN commands in Chapter 11, ED Commands.

•Updated parameters in RTRV-NE-GEN in Chapter 21, RTRV Commands

May 2008

•Added LINEWL AIDs for 40-WX-C cards.

•Updated shelf ID range to 1-12 from 1-8 for multi-shelf AIDs.

•Updated the <SRC1> input parameter for the COPY-RFILE command.

June 2008

•Deleted the <PH> parameter and updated the Input Format, Example, and Parameter for the INIT-SYS command in section 15.2 of Chapter 15, INIT Commands.

•Added a note to the RTRV-FAC command.

July 2008

Updated the CHANNEL and LINEWL AIDs in the Access Identifiers chapter.

September 2008

Added the table "CTC Port Numbers and TL1 Aids" in the chapter, Access Identifiers.

November 2008

Updated Fan Tray AID description in EQPT AIDs table in Chapter 26, Access Identifiers.

Updated the Usage Guidelines section for RTRV-CRS command.

Added a note for <CRSTYPE> parameter in the Output Parameters table.

Added a note for SRC1 parameter.

Updated the Usage Guidelines section for ENT-FTPSERVER command.

January 2009

•Updated input parameter description for ED-<OCN_TYPE> command in Chapter 11, ED Commands.

•Added Facility AID format for CE-100T-8 and MS-ISC-100T cards in Chapter 25, Access Identifiers.

February 2009

•Updated the input example, for the ENT-LNK command in the chapter, ENT commands.

•Added prerequisites to COPY-RFILE command.

March 2009

Updated the input parameters for the ENT-OCHNC command in the chapter, ENT Commands.

April 2009

•Updated the following:

–The input format, input example and input parameters for the OPR-APC command in the chapter, OPR Commands.

–The WDMANS AID in the chapter, Access Identifiers.

May 2009

Updated the supported platform for SW-DX-EQPT in Chapter 24, SW Commands.

June 2009

•Updated the input parameters for the APPLY command in Chapter 3, APPLY Commands.

•Updated the output parameter for the RTRV-FAC command in Chapter 21, RTRV Commands.

•Updated the following:

–The output example and output parameters for the RTRV-CMD-SECU command in Chapter 21, RTRV Commands.

–The input example and input parameters for the ED-CMD-SECU command in Chapter 11, ED Commands.

Ju;y 2009

•Added a note in the section "RTRV-FAC" in Chapter 21, RTRV Commands.

August 2009

Updated the input parameter description for APPLY command in Chapter 3, APPLY Commands.

September 2009

Updated the PH parameter description in Chapter 15, INIT Commands.

November 2009

•Updated "OPR-PROTNSW-OCH" command description in the chapter "OPR Commands".

•Updated the <PJMON> parameter description in the chapter, "ED Commands".

•Updated the <PJMON> parameter description in the chapter "RTRV Commands".

January 2010

Updated the input format, input example, and added a new parameter <OPRNOMINAL> for ED-<OCN_TYPE> command in the chapter, "ED Commands".

February 2010

Updated Input Parameters table in the chapter "INIT Commands".

June 2010

Updated the input example and input parameters for the ENT-LNK command in the chapter, ENT commands.

July 2010

•Updated the "RTRV-AUDIT-LOG" command in the chapter "RTRV Commands".

•Updated the input parameter for the INIT-SYS command in the chapter, INIT Commands.

September 2010

Updated the table RFILE in the chapter "Access Identifiers".

April 2011

Updated the input parameter description for the ED-<OCN_TYPE> command in the chapter, ED Commands.

May 2011

Updated the output parameter description for the RTRV-<OCN_TYPE> command in the chapter, RTRV Commands.

September 2011

•Added a note to RTRV-PM-<MOD2> section.

•Modified "Mode" description in ED-<OCN_TYPE> section.

March 2012

Added Facility AID for CE1000 cards in the chapter "Access Identifiers".

August 2012

The full length book-PDF was generated.

[     ]

Keywords or arguments that appear within square brackets are optional.

{ x | x | x }

A choice of keywords (represented by x) appears in braces separated by vertical bars. The user must select one.

Ctrl

The control key. For example, where Ctrl + D is written, hold down the Control key while pressing the D key.

screen font

Examples of information displayed on the screen.

<     >

Command parameters that must be replaced by module-specific codes.

IMPORTANT SAFETY INSTRUCTIONS

This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071

SAVE THESE INSTRUCTIONS

Waarschuwing

BELANGRIJKE VEILIGHEIDSINSTRUCTIES

Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van de standaard praktijken om ongelukken te voorkomen. Gebruik het nummer van de verklaring onderaan de waarschuwing als u een vertaling van de waarschuwing die bij het apparaat wordt geleverd, wilt raadplegen.

BEWAAR DEZE INSTRUCTIES

Varoitus

TÄRKEITÄ TURVALLISUUSOHJEITA

Tämä varoitusmerkki merkitsee vaaraa. Tilanne voi aiheuttaa ruumiillisia vammoja. Ennen kuin käsittelet laitteistoa, huomioi sähköpiirien käsittelemiseen liittyvät riskit ja tutustu onnettomuuksien yleisiin ehkäisytapoihin. Turvallisuusvaroitusten käännökset löytyvät laitteen mukana toimitettujen käännettyjen turvallisuusvaroitusten joukosta varoitusten lopussa näkyvien lausuntonumeroiden avulla.

SÄILYTÄ NÄMÄ OHJEET

Attention

IMPORTANTES INFORMATIONS DE SÉCURITÉ

Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant entraîner des blessures ou des dommages corporels. Avant de travailler sur un équipement, soyez conscient des dangers liés aux circuits électriques et familiarisez-vous avec les procédures couramment utilisées pour éviter les accidents. Pour prendre connaissance des traductions des avertissements figurant dans les consignes de sécurité traduites qui accompagnent cet appareil, référez-vous au numéro de l'instruction situé à la fin de chaque avertissement.

CONSERVEZ CES INFORMATIONS

Warnung

WICHTIGE SICHERHEITSHINWEISE

Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und den üblichen Verfahren zur Vorbeugung vor Unfällen vertraut. Suchen Sie mit der am Ende jeder Warnung angegebenen Anweisungsnummer nach der jeweiligen Übersetzung in den übersetzten Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden.

BEWAHREN SIE DIESE HINWEISE GUT AUF.

Avvertenza

IMPORTANTI ISTRUZIONI SULLA SICUREZZA

Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle persone. Prima di intervenire su qualsiasi apparecchiatura, occorre essere al corrente dei pericoli relativi ai circuiti elettrici e conoscere le procedure standard per la prevenzione di incidenti. Utilizzare il numero di istruzione presente alla fine di ciascuna avvertenza per individuare le traduzioni delle avvertenze riportate in questo documento.

CONSERVARE QUESTE ISTRUZIONI

Advarsel

VIKTIGE SIKKERHETSINSTRUKSJONER

Dette advarselssymbolet betyr fare. Du er i en situasjon som kan føre til skade på person. Før du begynner å arbeide med noe av utstyret, må du være oppmerksom på farene forbundet med elektriske kretser, og kjenne til standardprosedyrer for å forhindre ulykker. Bruk nummeret i slutten av hver advarsel for å finne oversettelsen i de oversatte sikkerhetsadvarslene som fulgte med denne enheten.

TA VARE PÅ DISSE INSTRUKSJONENE

Aviso

INSTRUÇÕES IMPORTANTES DE SEGURANÇA

Este símbolo de aviso significa perigo. Você está em uma situação que poderá ser causadora de lesões corporais. Antes de iniciar a utilização de qualquer equipamento, tenha conhecimento dos perigos envolvidos no manuseio de circuitos elétricos e familiarize-se com as práticas habituais de prevenção de acidentes. Utilize o número da instrução fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham este dispositivo.

GUARDE ESTAS INSTRUÇÕES

¡Advertencia!

INSTRUCCIONES IMPORTANTES DE SEGURIDAD

Este símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de manipular cualquier equipo, considere los riesgos de la corriente eléctrica y familiarícese con los procedimientos estándar de prevención de accidentes. Al final de cada advertencia encontrará el número que le ayudará a encontrar el texto traducido en el apartado de traducciones que acompaña a este dispositivo.

GUARDE ESTAS INSTRUCCIONES

Varning!

VIKTIGA SÄKERHETSANVISNINGAR

Denna varningssignal signalerar fara. Du befinner dig i en situation som kan leda till personskada. Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och känna till vanliga förfaranden för att förebygga olyckor. Använd det nummer som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning.

SPARA DESSA ANVISNINGAR

Aviso

INSTRUÇÕES IMPORTANTES DE SEGURANÇA

Este símbolo de aviso significa perigo. Você se encontra em uma situação em que há risco de lesões corporais. Antes de trabalhar com qualquer equipamento, esteja ciente dos riscos que envolvem os circuitos elétricos e familiarize-se com as práticas padrão de prevenção de acidentes. Use o número da declaração fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham o dispositivo.

GUARDE ESTAS INSTRUÇÕES

Advarsel

VIGTIGE SIKKERHEDSANVISNINGER

Dette advarselssymbol betyder fare. Du befinder dig i en situation med risiko for legemesbeskadigelse. Før du begynder arbejde på udstyr, skal du være opmærksom på de involverede risici, der er ved elektriske kredsløb, og du skal sætte dig ind i standardprocedurer til undgåelse af ulykker. Brug erklæringsnummeret efter hver advarsel for at finde oversættelsen i de oversatte advarsler, der fulgte med denne enhed.

GEM DISSE ANVISNINGER