CLR Commands
This chapter provides clear (CLR) commands for the Cisco ONS 15310-CL, Cisco ONS 15310-MA, Cisco ONS 15454, and Cisco ONS 15600.
6.1 CLR-COND-SECU
(Cisco ONS 15454, 15327, 15600, 15310) The Clear Security Condition (CLR-COND-SECU) command clears the specified standing condition.
Usage Guidelines
In Software Release 6.0 and later, only the INTRUSION-PSWD parameter value is supported.
Category
Security
Security
Superuser
Input Formats
CLR-COND-SECU:[<TID>]::<CTAG>[::<SECUALMTYPE>];
Input Examples
CLR-COND-SECU:CISCO::123::INTRUSION-PSWD:
Input Parameters
<SECUALMTYPE> |
Secure alarm type. Defaults to INTRUSION-PSWD. The parameter type is security alarm type (SECUALMTYPE). |
•INTRUSION-PSWD |
Condition raised after an invalid password is used during login. Condition is raised only if the password is used a specified number of times. |
6.2 CLR-MACTABLE
(Cisco ONS 15310-CL, Cisco ONS 15310-MA, Cisco ONS 15454, and Cisco ONS 15600) The CLR-MACTABLE command clears the MAC table that has all the learned MAC addresses.
Usage Guidelines
The card should be in Layer2 over DMDM mode to clear the MAC address.
Category
System
Security
Retrieve
Input Format
CLR-MACTABLE :[<TID>]:<AID>:<CTAG>;
Input Example
CLR-MACTABLE::SLOT-2:1;