RMV Commands
This chapter provides remove (RMV) commands for the Cisco ONS 15310-CL, Cisco ONS 15310-MA, Cisco ONS 15454, and Cisco ONS 15600.
19.1 RMV-<MOD2>
(Cisco ONS 15454, 15327, 15600, 15310) The Remove 10GFC, 10GIGE, 40GIGE, 1GFC, 1GFICON, 2GFC, 2GFICON, 5GIB, 8GFC, CLNT, D1VIDEO, DS1, DV6000, DVBASI, E1, E3, E4, EC1, ESCON, ETRCLO, ETH, FSTE, G1000, GFPOS, GIGE, HDTV, ISC1, ILK, ISCCOMPAT, ISC3PEER2R, ISC3PEER1G, ISC3PEER2G, OC12, OC192, OC3, OC48, OC768, OCH, OMS, OTS, OTU3, POS, STS1, STS12C, STS18C, STS192C, STS24C, STS36C, STS3C, STS48C, STS96C, STS6C, STS9C, T1, T3, VC12, VC3, VT1, or VT2 (RMV-<MOD2>) command removes a facility from service.
Usage Guidelines
See Table 28-1 for supported modifiers by platform.
Category
Ports
Security
Maintenance
Input Format
RMV-<MOD2>:[<TID>]:<AID>:<CTAG>[::];
Input Example
RMV-EC1:CISCO:FAC-1-1:1;
Input Parameters
19.2 RMV-EQPT
(Cisco ONS 15454, 15327, 15600, 15310) The Remove Equipment (RMV-EQPT) command removes equipment from the In Service (IS) state and places it into the Maintenance (MT) state.
Usage Guidelines
This command is only applicable to equipment that is in transition from the IS state to the MT state.
Note This command can be executed only if the equipment is in IS-NR, OOS-AU,MEA or OOS-AU,UEQ state.
Category
Equipment
Security
Maintenance
Input Format
RMV-EQPT:[<TID>]:<AID>:<CTAG>[::];
Input Example
RMV-EQPT:CISCO:SLOT-1:1;
Input Parameters