The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
To replace the fan tray, complete the following steps:
Note |
If you are hot-swapping the fan tray, it is recommended to complete the operation within two minutes to ensure that the device remains within operating temperature. |
Step 1 |
Loosen the three captive fan tray screws. |
Step 2 |
Pull the fan tray out. |
Step 3 |
Insert the replacement fan tray and tighten the three captive screws. |