New and Changed Information
As of Cisco Fabric Manager Release 4.2(1), software configuration information is available in new feature-specific configuration guides for the following information:
•System management
•Interfaces
•Fabric
•Quality of service
•Security
•IP services
•High availability and redundancy
The information in these new guides previously existed in the Cisco MDS 9000 Family CLI Configuration Guide and in the Cisco MDS 9000 Family Fabric Manager Configuration Guide. Those configuration guides remain available on Cisco.com and should be used for all software releases prior to Cisco Fabric Manager Release 4.2(1). Each guide addresses the features introduced in or available in a particular release. Select and view the configuration guide that pertains to the software installed in your switch.
For a complete list of document titles, see the list of Related Documentation in the "Preface."
To find additional information about Cisco Fabric Manager Release 4.2(1), see the Cisco MDS 9000 Family Release Notes available at the following Cisco Systems website:
http://www.cisco.com/en/US/products/ps5989/prod_release_notes_list.htm
About This Guide
The information in the new Cisco Fabric Manager Inter-VSAN Routing Configuration Guide previously existed in the Fabric Configuration section in the Cisco MDS 9000 Family Fabric Manager Configuration Guide, Release 4.x.
Table 1 lists the New and Changed features for this guide, starting with Cisco Fabric Manager Release 4.2(1).
|
|
|
|
---|---|---|---|
Basic IVR configuration |
Reorganized basic IVR configuration information. |
4.2(1) |
|
Advanced IVR configuration |
Reorganized advanced IVR configuration information. Added "Working with Existing IVR Topologies" section. Added "Advanced Configuration Task List" section. Added IVR Zone configuration guidelines. |
4.2(1) |
Chapter 2, "Advanced Inter-VSAN Routing Configuration" Working With Existing IVR Topologies, page 11 Advanced IVR Configuration Task List, page 2 |