Cisco Nexus 3548 Switch NX-OS Unicast Routing Configuration Guide, Release 6.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: March 20, 2018

Chapter: New and Changed Information

New and Changed Information

New and Changed Information

This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 3548 Switch NX-OS Unicast Routing Configuration Guide, Release 6.x. The latest version of this document is available at the following Cisco website:

http://www.cisco.com/c/en/us/support/switches/nexus-3000-series-switches/products-installation-and-configuration-guides-list.html

To check for additional information, see the Cisco Nexus 3548 Switch NX-OS Release Notes, Release 6.x available at the following Cisco website:

http://www.cisco.com/c/en/us/support/switches/nexus-3000-series-switches/products-release-notes-list.html

New and Changed Information

New and Changed Information

Table below summarizes the new and changed features for the Cisco Nexus 3548 Switch NX-OS Unicast Routing Configuration Guide, Release 6.x, and tells you where they are documented.

Table 1 New and Changed Feature Information
Feature	Description	Changed in Release	Where Documented
Policy based routing	Added support for policy based routing.	6.0(2)A7(1)	Configuring Policy-Based Routing
Multiprotocol BGP	Added support for Multiprotocol BGP.	6.0(2)A7(1)	Multiprotocol BGP
BFD over OSPF	Added support for BFD over OSPFv2.	6.0(2)A6(4)	Configuring Bidirectional Forwarding Detection
BFD	Added information about support for BGP and PIM.	6.0(2)A4(1)	Configuring Bidirectional Forwarding Detection
BGP Additional Paths	Added information on how to configure BGP Additional Paths.	6.0(2)A1(1)	Configuring BGP Additional Paths
VRF Route Leaking	Added information on VRF-lite support for VRF route leaking. Included guidelines, limitations, and sample configurations.	6.0(2)A1(1)	Configuring Layer 3 Virtualization

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)