Cisco Nexus 9364C-H1 NX-OS Mode Switch Hardware Installation Guide

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: June 26, 2024

Additional Kits

Rack Mount Kit NXK-ACC-RMK2-2RU

The following table lists and illustrates the contents for the 2-RU rack-mount kit (NXK-ACC-RMK2-2RU).


Illustration	Description	Quantity
	Rack-mount kit Rack-mount brackets (2) Rack-mount front-mount brackets (2) Rack-mount slider rails (2) Rack-mount retainer clips (2) Phillips countersink screws (12) Flat head screws M4 (6) Flat head screws M3 (4)	1
Not applicable	EAC Compliance document	1
Not applicable	Hazardous substances list for customers in China	1

The following table lists and illustrates the console cable (CAB-CONSOLE-RJ45) that can be ordered.


Illustration	Description	Quantity
	Console cable with DB-9F and RJ-45F connectors	1

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)