- Preface
- Overview of UCS Server Configuration Utility
- Getting Started with UCS-SCU
- Understanding UCS-SCU User Interface
- Viewing Server Inventory
- Viewing Server Health
- Installing Operating Systems
- Understanding Diagnostic Tools
- Configuring Boot Order and RAID Levels
- Viewing Logs
- Troubleshooting UCS-SCU Issues
- Index
Viewing Server Inventory
This chapter includes the following sections:
About Server Inventory
You can use the server inventory functionality to perform an inventory of your server. You can view details such as server summary, server properties, and an inventory of subsystems on your server such as CPU, memory, power supplies, fans, IO devices, storage, BIOS, and CIMC.
Subsystem | Description |
---|---|
CPU |
Displays the socket name, status, number of cores, number of threads, vendor, version, cores enabled, and signature of the CPUs on your server. |
Memory |
Displays the size, data width, locator, speed, and serial number of the DIMMs on your server. |
Power Supplies |
Displays the input power, output power (in watts), part number, version, serial number, and product name of the power supply units on your server. |
Fans |
Displays the status, power state, and speed of the fans on your server. |
IO Devices |
Displays the type, vendor, description, and MAC address and serial number of the I/O devices on your server. |
Storage |
Displays the type, description, vendor, size, bus information, and serial number of the storage devices on your server. |
BIOS |
Displays the vendor, version, physical ID, size, capacity, and boot order of the BIOS on your server. |
CIMC |
Displays the IP address, MAC address, firmware version, and IPMI version of the CIMC on your server. |
Using the Server Inventory Functionality
To view the inventory of your server, follow these steps: