Revision History
Date |
Revision |
---|---|
March 31, 2021 |
Initial publication |
Introduction
Note |
To view the release notes for previous versions of Cisco Unified Communications Manager, choose the Cisco Unified Communications Manager version from the following URL: http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_release_notes_list.html |
Note |
Please review all sections in this document pertaining to installation before you install this version. Failure to install this version as described may result in inconsistent Cisco Unified Communications Manager behavior. |
This 14 ReadMe file contains important information about installation procedures and resolved caveats for Cisco Unified Communications Manager release 14. This version can be applied to Cisco Unified Communications Manager and Session Management Edition.
Note |
Before you install Cisco Unified Communications Manager, Cisco recommends that you review the Important Notes for information about issues that may affect your system. |
System Requirements
The following sections comprise the system requirements for this release.
Server Support
In this release, you cannot install or run Cisco Unified Communications Manager on server hardware; you must run these applications on virtual machines. Please refer to the “Hardware” section of the Upgrade and Migration Guide for Cisco Unified Communications Manager and the IM and Presence Service, Release 14 for additional details:
Uninterruptible Power Supply
Ensure that you connect each node to an uninterruptible power supply (UPS) to provide backup power and protect your system.
Caution |
Failure to connect the Cisco Unified Communication Manager nodes to a UPS may result in damage to physical media and require a new installation of Cisco Unified CM. |
Version and Description
For a list of all supported upgrade paths and the supported upgrade method, please see the Compatibility Matrix at:
New to this Release
For details about the features included in this release, refer to Release Notes for Cisco Unified Communications Manager and IM & Presence Service, Release 14 at:
Important Notes
Compatibility between collaboration products is detailed at the following link. You must insure your versions are compatible before beginning your upgrade:
Cisco provides the following guidance to help you successfully upgrade Cisco Unified Communications Manager software:
-
To minimize call-processing interruptions during the upgrade process, register all devices to servers that are running the same version of Cisco Unified Communications Manager software. Make sure that you register all devices to the backup Cisco Unified Communications Manager server or to the primary Cisco Unified Communications Manager server, but not to both the backup and primary servers.
Related Documentation
To view documentation that supports Cisco Unified CM Release 14, go to:
Before You Begin
Before you upgrade the software version of Cisco Unified Communications Manager, verify your current software version.
To do that, open Cisco Unified Communications Manager Administration. The following information displays:
Cisco Unified CM Administration System version: x.x.x
Installation Instructions
Refer to the Upgrade and Migration Guide for Cisco Unified Communications Manager and IM and Presence Service, Release 14 for detailed information about doing this upgrade:
Note |
Because the 14.0.1.10000-20 build is a non-bootable ISO, it proves useful only for upgrades. You cannot use it for new installations. |
Release 14 is available in both restricted (which is the release type that has always been available from Cisco) and unrestricted versions of software to comply with import / export restrictions to various countries. The unrestricted version is available in limited markets. Please refer to the “Export Restricted and Export Unrestricted Software” section in the Understanding Upgrades and Migrations chapter, of the Upgrade and Migration Guide for Cisco Unified Communications Manager and the IM and Presence Service, Release 14 referenced above, for a more detailed description.
Note |
Once installed, UNRST releases can never be converted or upgraded to releases which support full encryption capabilities |
The file names and hash values you will use for this upgrade are:
ISO Name: |
UCSInstall_UCOS_14.0.1.10000-20.sha512.iso |
MD5: |
f850f9f1140765d9b9ae88887f3c2373 |
SHA512: |
912d76bee17c1fc2af2df06f8812c6bccebfd53d18e329132fc0a051602a22908f94b2b7ed40128 1ab713cc0c500a9dfa6c571be696b8a1afd7ba90aa7a253a7 |
ISO Name: |
UCSInstall_UCOS_UNRST_14.0.1.10000-20.sha512.iso |
MD5: |
2860d656a21da294df7f44b2e5afd91e |
SHA512: |
eeb2cdbde0ed9bea9b2903c4eb3c7c3664b23651dfad7b03f5ba687f44d924b49ab81ac56d35 1e7ac32ec15185db9dc88cd6a285d54621a12c71f56172d4a92b |
Reverting to a Previous Version
Note |
Revert to the previous version on all servers in the cluster in the same order in which you performed the upgrade. |
Refer to the “Switch to Previous Version” section in the Upgrade Procedures chapter at Upgrade and Migration Guide for Cisco Unified Communications Manager and IM and Presence Service, Release 14 for detailed instructions on “Reverting to a Previous Version.”
Caveats
Caveats describe unexpected behavior on a Cisco Unified Communications server. The following sections contain lists and descriptions of resolved and open caveats in this release.
Resolved Caveats
Resolved Caveats for Cisco Unified Communications Manager Release 14 describes possible unexpected behaviors in Cisco Unified Communications Manager 14 releases.
Resolved CUCM Caveats in 14 (fixed in the base release)
Click Here for the list
Open Caveats
Open Caveats for Cisco Unified Communications Manager Release 14 describes a few of the possible unexpected behaviors still remaining in Cisco Unified Communications Manager Release 14.
CUCM Caveats 14 Complete List
For a complete list of caveats applicable to 14, use the following Bug Search Tool link:
To determine the caveats that were open for a specific release, download the results to Excel and use the Known Fixed Release values to filter out the applicable releases. The Known Fixed Release for base CUCM 14 is 14.0(1.10000.20). Once the filters are applied, additional sorting / filtering can be applied for Bug Severity, Bug Status, and keywords. Here are some examples of how to generate lists for a specific release:
All Base Version Unresolved Caveats: To get a list of caveats that are applicable to CUCM 14 but are not fixed in the base release, use an Advanced Filter in Excel with an AND condition on the Known Fixed Releases column with the following values:
<>*CCM.14.0(1.10000.20)*
Firmware Versions
SUs contain firmware loads, however, Cisco recommends that you always download the latest firmware load from the Software Download Center.
Phone Firmware
To download phone firmware, follow this procedure:
-
Click on Browse All
-
Click on Collaboration Endpoints
-
Choose the desired Endpoint Type
-
Choose the desired Endpoint Model
Device Packages
To download phone firmware, follow this procedure:
-
Click on Browse All
-
Click on Unified Communications
-
Click on Call Control
-
Click on Unified Communications Manager (CallManager)
-
Choose the desired UCM version
-
Click on the Device Packages link
Firmware Versions in this Release
Device type Load name Version
---------------------------------------- ------------------------------ ----------
3905 3905.9-4-1SR3 9.4(1SR3.0)
3911_3951-sip 3911_3951-sip.8-1-4a 8.1(4.0)
6608 6608-4.0.0.32-mgcp 4.0(0.32)
6608cfb 6608cfb-4.0.0.03-sccp 4.0(0.3)
6608mtp 6608mtp-4.0.0.06-sccp 4.0(0.6)
6624 6624-4.0.0.13-mgcp 4.0(0.13)
6901-sccp 6901-sccp.9-3-1-SR2-2 9.3(1.0)
6901-sip 6901-sip.9-3-1-SR2-3 9.3(1.0)
6911-sccp 6911-sccp.9-3-1-SR2-3 9.3(1.0)
6911-sip 6911-sip.9-3-1-SR2-4 9.3(1.0)
6945-SCCP 6945-SCCP-9-4-1-3SR3 9.4(1.3)
6945-SIP 6945-SIP-9-4-1-3SR3 9.4(1.3)
69xx-SCCP 69xx-SCCP-9-4-1-3SR3 9.4(1.3)
69xx-SIP 69xx-SIP-9-4-1-3SR3 9.4(1.3)
7832-sip.14 7832-sip.14-0-1-0001-135.k3 14.0.1(0001.135)
78xx.14 78xx.14-0-1-0001-135.k3 14.0.1(0001.135)
7911_7906-sccp 7911_7906-sccp.9-4-2SR3-1 9.4(2SR3.1)
7911_7906-sip 7911_7906-sip.9-4-2SR3-1 9.4(2SR3.1)
7914-sccp 7914-sccp.5-0-4 5.0(4.0)
7915 7915.1-0-4-2 1.0(4.2)
7916 7916.1-0-4-2 1.0(4.2)
7925-sccp 7925-sccp.1-4-8SR1-5.k3 1.4(8SR1.5)
7926-sccp 7926-sccp.1-4-8SR1-5.k3 1.4(8SR1.5)
7931-sccp 7931-sccp.9-4-2SR2-2 9.4(2SR2.2)
7931-sip 7931-sip.9-4-2SR2-2 9.4(2SR2.2)
7936-sccp 7936-sccp.3-3-21 3.3(21.0)
7937 7937-1-4-5-7-SCCP 1.4(5.7)
7940-7960 7940-7960-8.12.00-sip 8.12(00.0)
7940-7960-sccp 7940-7960-sccp.8-1-2SR2 8.1(2SR2.0)
7941_7961-sccp 7941_7961-sccp.9-4-2SR3-1 9.4(2SR3.1)
7941_7961-sip 7941_7961-sip.9-4-2SR3-1 9.4(2SR3.1)
7942_7962-sccp 7942_7962-sccp.9-4-2SR3-1 9.4(2SR3.1)
7942_7962-sip 7942_7962-sip.9-4-2SR3-1 9.4(2SR3.1)
7945_7965-sccp 7945_7965-sccp.9-4-2SR3-1 9.4(2SR3.1)
7945_7965-sccp 7945_7965-sccp.9-4-2SR4 9.4(2SR4.0)
7945_7965-sip 7945_7965-sip.9-4-2SR4-3 9.4(2SR4.3)
7975-sccp 7975-sccp.9-4-2SR3-1 9.4(2SR3.1)
7975-sccp 7975-sccp.9-4-2SR4 9.4(2SR4.0)
7975-sip 7975-sip.9-4-2SR4 9.4(2SR4.0)
7985 7985-4-1-7-0-sccp 4.1(7.0)
8821-sip 8821-sip.11-0-6-7.k3 11.0(6.7)
8831-sip 8831-sip.10-3-1SR6-4 10.3(1SR6.4)
8832-sip.14 8832-sip.14-0-1-0001-135.k3 14.0.1(0001.135)
8845_65-sip.14 8845_65-sip.14-0-1-0001-135.k3 14.0.1(0001.135)
88xx-sip.14 88xx-sip.14-0-1-0001-135.k3 14.0.1(0001.135)
894x-sccp 894x-sccp.9-4-2SR3-1 9.4(2SR3.1)
894x-sip 894x-sip.9-4-2SR3-1 9.4(2SR3.1)
8961 8961.9-4-2SR4-1.k3 9.4(2SR4.1)
9951 9951.9-4-2SR4-1.k3 9.4(2SR4.1)
9971 9971.9-4-2SR4-1.k3 9.4(2SR4.1)
ata ata-3.2.4-sccp 3.2(4.0)
ata187 ata187.9-2-3-1 9.2(3.1)
ata190 ata190.1-2-2-003_SR2-1 1.2(2.3)
ata191.12 ata191.12-0-1-0301-002 0.1(0301.2)
headset-builtin headset-builtin.2-2-0001-5 2.2(0001.5)
headset-builtin headset-builtin.2-2-0001-6 2.2(0001.6)
Plug-in Report
------------------------------------------
cm-rtmt-client-plugin-14.0.0.0-0.i386.rpm
cm-taps-plugin-7.0.2.0-1.i386.rpm
cm-jtapi-plugin-14.0.1.10000-1.i386.rpm
cm-tsp-plugin-14.0.0.6-0.i386.rpm
cm-axlsqltoolkit-plugin-1.1.0.0-1.i386.rpm
cm-ctlc-plugin-6.0.0.1-1.i386.rpm
TZDATA file Version
---------------------------------------- ----------
platform-tzdata-2020a-1.el7.noarch.rpm 2020-a
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.