Limitations and Restrictions
This section contains information on the current limitations and restrictions of the application.
Known Issues
The following issues are known in Cisco Jabber for iPad:
-
General Issues
- Cisco Jabber for iPad does not support Global Site Backup (GSB). To resolve problems related to this issue, try closing Cisco Jabber for iPad, starting it, and then signing in again.
- Users of Cisco WebEx free accounts cannot add contacts using email addresses. When adding contacts, they must know their Jabber user IDs.
- If the title of a group chat you started in Cisco Unified Personal Communicator contains a space, the space will be shown as \20, instead of a space, in Cisco Jabber for iPad.
- If you are signed in with your IM account on multiple devices and answer an incoming call on the iPad, the incoming call dialog box remains on the other devices.
- You cannot start device calls with contacts using Cisco Jabber for Mac and Cisco Jabber for Windows. Cisco Jabber for iPad also cannot display error messages when such calls cannot be started.
-
Cisco WebEx Messenger
- Users of Cisco WebEx Messenger 7.0.1 cannot make a device call.
- If you have the same sign-in information for your Cisco WebEx Messenger and Cisco Jabber Video for TelePresence accounts, you can sign in to Cisco WebEx Messenger only.
- Cisco WebEx meeting invitations are not sent from Cisco Jabber for iPad if is set to Sign out on Exit.
- Cisco Unified Presence
- Cisco Jabber Video for TelePresence
Important Considerations
Note the following important considerations when using Cisco Jabber for iPad:
-
General Considerations
- Attention: Apple plans to remove the Always Connect option in the near future. After the Always Connect option is removed, users can select the Connect If Needed option. In some cases, Cisco Jabber users may have issues when using the Connect If Needed option. For example, if the hostname for the Cisco Unified Communications Manager is resolvable outside the corporate network, iOS will not trigger a VPN connection. The user can work around this issue by manually launching Cisco AnyConnect Secure Mobility Client before making a call.
- Cisco Jabber for iPad does not remember server information and credentials when changing server types.
- If you transition between networks, your availability status may not be accurate.
- It may take up to 10 minutes for your availability status updates to appear for other contacts.
-
Cisco Jabber for iPad supports interoperability and optimal video quality with Cisco TelePresence System (CTS) devices if you use a TelePresence or video bridge to connect the devices. The number of devices that you can use for joining a video call will be determined by the Multipoint Control Unit (MCU) and settings defined for the conference bridge. For the best video experience when establishing a direct video call between Cisco Jabber for iPad and a CTS device, use the required versions and settings. Otherwise, video quality in Cisco Jabber for iPad will be impacted; resulting video quality may include low frame-rate video with high or increasing latency, lack of lip synchronization, or excessive video artifacting. For more information, see CSCtx47090 in Open caveats.
- Cisco Jabber for iPad bandwidth has been limited to 384 kbps due to CPU constraints on the supported iPad hardware.
-
Cisco WebEx Messenger
- You cannot block contacts who are within your own organization.
- You cannot join a conference call if the call is placed by a Cisco WebEx Messenger user from a group chat started on his or her computer.
- If you delete a group of contacts on a device other than iPad, the group will still appear in Cisco Jabber for iPad.
-
Cisco Unified Presence
- If you delete a group of contacts on a device other than iPad, the group will still appear in Cisco Jabber for iPad.
- You cannot block contacts who are within your own organization.
Note
Cisco Jabber for iPad does not support joining Cisco WebEx Meeting Server (CWMS) meeting when sign-in with the Cisco Unified Presence account.
-
Cisco WebEx Meetings
- If you start an action, such as signing in or tapping WebEx Meeting to start a meeting, and then bring Cisco Jabber for iPad to the background before the action is completed, you cannot successfully complete the action.
- Invitees will receive meeting invitations whether or not the meeting has been started.
- If you tap WebEx Meeting to start a meeting, a meeting invitation is sent immediately. If the invitee selects the meeting link immediately but the meeting is still in the process of starting, the invitee receives an error message and, as a result, cannot join the meeting again.
- If you sign in using a Cisco WebEx Meetings account, you can use instant messaging (IM), but you cannot start a WebEx meeting from Cisco Jabber for iPad.
- Cisco TelePresence Video Communication Server
-
Cisco Jabber Video for TelePresence / Cisco WebEx TelePresence
- Cisco Jabber for iPad does not support proxy server setup if you are using Cisco TelePresence Video Communication Server (VCS) or Cisco Jabber Video for TelePresence.
- If you sign in to Cisco Jabber for iPad using a Cisco Jabber Video for TelePresence or Cisco WebEx TelePresence account for the first time, your contact list is empty. You will need to add contacts.
- Single Sign On