サポートされるバージョンおよびプラットフォーム
|
HX Data Platform
3.5 (2a) 以降
重要
|
HXDP リリース 3.5(2a) は、サポートされる最小リリースです。
|
|
コンピューティング専用ノードとストレージ オプション
注目
|
UCS B200 M5 ブレード サーバ (M.2 SATA ドライブ搭載)。
HW RAID M.2 (UCS-M2-HWRAID および HX-M2-HWRAID) は、コンピューティング専用ノードではサポートされていません。
UCS B200 M4 ブレード サーバ (ローカル SAS または ファイバ チャネル SAN 搭載)。
|
|
Windows ISO
お客様から提供される Windows 2016 Datacenter Edition ISO
|
コンピューティングからコンバージドへの最大比率
|
1:1
|
最大クラスタ サイズ
|
1 個のクラスタに最大 32 ノードを設定できます。
|
ネットワーク速度
|
コンピューティング専用ノードと HyperFlex コンバージド ノード間でネットワーク速度を混在させることは推奨されません。たとえば、コンバージド ノードの既存のネットワーク接続が 40 GbE の場合、コンピューティング専用ノードも 40
Gb の速度で接続する必要があります。
|
ブート ディスク接続の決定
|
トポロジおよび追加するコンピューティング専用ノードのタイプに基づいて、次の拡張シナリオのいずれかを選択します。
|
ブート ディスク容量
|
Windows OS のインストール時に、240GB よりも大きいブート ディスクが 1 個のみ存在することを確認します。クラスタの拡張が完了したら、追加のディスクを選択できます。
|
HyperFlex ドライバ イメージの準備
|
Windows ISO および Hyperflex ドライバ イメージ ファイルは、Cisco UCS Manager およびアウトオブバンド サブネットから到達可能な共有ロケーション (HX インストーラなど) に配置する必要があります。インストーラ VM 内の共有ロケーションで、HyperFlex ドライバ
イメージと Windows ISO をダウンロードしてホストするには、次の手順を使用します。
(注)
|
Windows は Cisco HX Release 4.5 以降から UEFI モードに起動するように構成されています。
|
(注)
|
これらの手順は、Windows Server 2016 および Windows Server 2019 の両方に対して適用します。
|
-
HyperFlex ドライバ イメージをコピーします。たとえば、次のコマンドを実行します。
rsync -avzP /opt/springpath/packages/latest.img /var/www/localhost/images/install.img
-
HyperFlex ドライバイメージをマウントします。たとえば、次のコマンドを実行します。
mkdir -p /mnt/install-img && mount -o loop,rw /var/www/localhost/images/install.img /mnt/install-img
-
Windows Server バージョンの応答ファイル固有のファイルをコピーして、次のコマンドを実行します。
Windows Server 2016
cp/opt/springpath/packages/FactoryUnattendXML/WindowsServer2016/ Autounattend.xml.uefi /mnt/installimg/Autounattend.xml
Windows Server 2019
cp /opt/springpath/packages/FactoryUnattendXML/WindowsServer2019/Autounattend.xml.uefi /mnt/install-img/Autounattend.xml
-
HyperFlex ドライバイメージをマウント解除します。たとえば、次のコマンドを実行します。
umount /mnt/install-img
(注)
|
SD カードに Windows Server 2019 または 2016 をインストールすることはできません。
|
(注)
|
autounattend.xml で参照されている DiskID は、OS がインストールされているコンピューティング ノード上のローカル ディスクを正しく指し示す必要があります。
|
|
ファイバ チャネル SAN を使用したマルチパス
|
ファイバ チャネル SAN では、マルチパスを使用しないでください。
|
ファブリック インターコネクト サポート
|
コンピューティング専用ノードの拡張は、コンピューティング ノードが同じファブリック インターコネクト上にある場合にのみサポートされます。
|